Steren STV-021 Soporte para pantallas de 13" a 27", Owner's Manual
Steren STV-021 lets you conveniently mount your 13 to 27-inch LCD/LED TV on a wall or other flat surface. It supports a wide range of viewing angles, so you can find the perfect position for your screen. It is compatible with various TV models and brands, making it a versatile choice for your home entertainment setup. The sturdy construction ensures your TV is held securely in place, and the included hardware makes installation a breeze. Enjoy an enhanced viewing experience with this reliable and functional TV mount.
Advertisement
Advertisement
CMY
K
MY
CY
Y
CM
C
M
STV-021-V1.0-instr.pdf 1 14/09/16 6:01 p.m.
STV-021
Soporte para pantalla LCD / LED de 13 - 27”
V1.0
Manual de Usuario 0916A
CMY
K
MY
CY
Y
CM
C
M
STV-021-V1.0-instr.pdf 2 14/09/16 6:01 p.m.
Antes de utilizar su nuevo producto, lea el siguiente instructivo
• Este aparato NO está destinado para ser utilizado por personas con capacidades diferentes, a menos que cuenten con la preparación y supervisión adecuadas.
• Este producto NO es un juguete; manténgalo fuera del alcance de los niños.
Precauciones
STV-021-V1.0-instr.pdf 3 14/09/16 6:01 p.m.
A(x1)
Soporte
B(x1)
Placa principal
CMY
K
MY
CY
Y
CM
C
M
C(x1)
Tuerca con rosquilla
D(x1)
Rondana
E(x1)
Tornillo principal
F(x2)
Cubiertas
G(x1)
Pasacables
(x4)
M-A
Tornillos
(x4)
M-B
Tornillos
W-A (x2)
Tornillos
W-B (x2)
Taquetes para cemento
Contenido
STV-021-V1.0-instr.pdf 7 14/09/16 6:01 p.m.
Como armar el soporte
1. Coloque el tornillo (E) en la placa principal, luego inserte la arandela (D) en el tornillo.
2. Inserte el tornillo (E) en el orificio del brazo y utilice la tuerca con rosquilla (C) para fijarlo.
CMY
K
MY
CY
Y
CM
C
M
A C
B
D E
Armado
CMY
K
MY
CY
Y
CM
C
M
STV-021-V1.0-instr.pdf 4 14/09/16 6:01 p.m.
Herramientas necesarias para la instalación
(No incluidos)
Nivel de gota
Steren no se hace responsable por daños materiales ni personales causados por mal uso o mala instalación. Es responsabilidad del usuario asegurarse de la correcta instalación y uso del producto, así como de su periódica revisión.
Preparativos para la instalación
Utilice la base del soporte y el nivel de gota para realizar las marcas de las perforaciones sobre la superficie en la que desea instalar el soporte.
Al realizar las perforaciones, tenga cuidado de que no existan tuberías ocultas con cableado eléctrico, gas o agua.
Instalación
CMY
K
MY
CY
Y
CM
C
M
STV-021-V1.0-instr.pdf 5 14/09/16 6:01 p.m.
a) Sobre concreto
60mm
(2.4
”
)
1. Inserte los taquetes (W-B) en el muro y coloque los tornillos (W-A)
2. Asegúrese de que los tornillos sobresalgan aproximadamente
3 mm de la superficie.
W-B W-A
3mm
Instalación
STV-021-V1.0-instr.pdf 6 14/09/16 6:01 p.m.
b) Sobre madera
(
55mm
2.2” )
(
Ø4.5
m m
ø 3/16” )
CMY
K
MY
CY
Y
CM
C
M
1. Coloque los tornillos (W-A)
2. Asegúrese de que los tornillos sobresalgan aproximadamente
3 m de la superficie.
W-A X
3mm
Instalación
CMY
K
MY
CY
Y
CM
C
M
STV-021-V1.0-instr.pdf 8 14/09/16 6:01 p.m.
Instalación en la pantalla
TV
TV
TV
Coloque el soporte en la parte posterior de la pantalla y seleccione 4 tornillos del mismo tamaño para fijarlo.
Los tornillos suministrados son de medidas estándar. Le recomendamos consultar el manual de instrucciones de su pantalla para obtener información acerca de los tornillos necesarios para montarla en un soporte.
M-A
M-B
Instalación
STV-021-V1.0-instr.pdf 9 14/09/16 6:01 p.m.
Montaje y Ajuste
1. Inserte el soporte en los tornillos previamente
colocados en la pared.
CMY
K
MY
CY
Y
CM
C
M
2. Apriete los tornillos firmemente para asegurar
el soporte.
Montaje y ajuste
STV-021-V1.0-instr.pdf 10 14/09/16 6:01 p.m.
3. Coloque las cubiertas en la base del soporte
F
CMY
K
MY
CY
Y
CM
C
M
4. Coloque a presión el pasacables en el orificio señalado.
G
Montaje y ajuste
STV-021-V1.0-instr.pdf 11 14/09/16 6:01 p.m.
5. Afloje las tuercas, ajuste el ángulo de visión, y apriételas nuevamente.
CMY
K
MY
CY
Y
CM
C
M
180°
+20°
-20°
1 2
3
Montaje y ajuste
CMY
K
MY
CY
Y
CM
C
M
Modelo: STV-021 Marc
STV-021-V1.0-instr.pdf 12 14/09/16 6:01 p.m.
En caso de que su producto presente alguna falla, acuda al centro de distribución más cercano a su domicilio y en caso de tener alguna duda o pregunta por favor llame a nuestro Centro de Atención a Clientes, en donde con gusto le atenderemos en todo lo relacionado con su producto
CMY
K
MY
CY
Y
CM
C
M
STV-021-V1.0-instr.pdf 13 14/09/16 6:01 p.m.
13 to 27” LCD / LED TV stand
STV-021
V1.0
Instruction Manual 0916A
CMY
K
MY
CY
Y
CM
C
M
STV-021-V1.0-instr.pdf 14 14/09/16 6:01 p.m.
• Before using your product, please read the following instructions
• This device cannot be used by people with different habilities, at less they have preparation and supervision.
• This product is NOT a toy; keep it away from children
Cautions
STV-021-V1.0-instr.pdf 15 14/09/16 6:01 p.m.
A(x1)
Support
B(x1)
Plate
CMY
K
MY
CY
Y
CM
C
M
C(x1)
Threaded nut
D(x1)
Washer
E(x1)
Main screw
F(x2)
Covers
G(x1)
Cable lead through
(x4)
M-A
Screws
(x4)
M-B
Screws
W-A (x2)
Screws
W-B (x2)
Cement anchors
Content
STV-021-V1.0-instr.pdf 19 14/09/16 6:01 p.m.
As the support assembly
1. Place the screw (E) on the main board, then insert the washer
(D) in the screw.
2. Insert the screw (E) in the arm hole and use the Threaded nut (C) to fix it.
CMY
K
MY
CY
Y
CM
C
M
A C
B
D E
Assembly
CMY
K
MY
CY
Y
CM
C
M
STV-021-V1.0-instr.pdf 16 14/09/16 6:01 p.m.
Tools required for installation
(Not incluided)
Level drop
Steren not liable for damage and injury caused by misuse or improper installation. It is your responsibility to ensure proper installation and use of the product, and its periodic review.
Preparing for Installation
Use the stand base and the level of drop for drilling marks on the surface where you want to install support.
When making holes, be careful that there are no hidden pipes with electrical wiring, gas or water.
Installation
CMY
K
MY
CY
Y
CM
C
M
STV-021-V1.0-instr.pdf 17 14/09/16 6:01 p.m.
a) On concret
60mm
(2.4
” )
(
Ø10 m m
1. Insert anchors (W-B) on the wall and place the screws (W-A)
2. Make sure the screws protrude approximately 3 mm from the surface.
W-B W-A
3mm
Installation
STV-021-V1.0-instr.pdf 18 14/09/16 6:01 p.m.
b) On wood
(
55mm
2.2”
)
(
Ø4.5
m
ø 3/16” m
)
CMY
K
MY
CY
Y
CM
C
M
1. Place the screws (W-A)
2. Make sure the screws protrude approximately 3 m from the surface.
W-A X
3mm
Intallation
CMY
K
MY
CY
Y
CM
C
M
STV-021-V1.0-instr.pdf 20 14/09/16 6:01 p.m.
Installation on the screen
TV
TV
TV
Place the bracket on the back of the screen and select 4 screws to fix the same size.
The supplied screws are standard measures. We recommend consulting the instruction manual of your screen for information about the necessary screws for mounting on a support.
M-A
M-B
Installation
STV-021-V1.0-instr.pdf 21 14/09/16 6:01 p.m.
Assembly and Adjustment
1. Insert the bracket on the screws previously
placed on the wall.
CMY
K
MY
CY
Y
CM
C
M
2. Tighten the screws firmly to secure the bracket.
Assembly and adjustment
STV-021-V1.0-instr.pdf 22 14/09/16 6:01 p.m.
3. Place the covers on the stand base
F
CMY
K
MY
CY
Y
CM
C
M
4. Snap the cable gland in the hole indicated.
G
Assembly and adjustment
STV-021-V1.0-instr.pdf 23 14/09/16 6:01 p.m.
5. Loosen the nuts, adjust the viewing angle, and tighten them again.
CMY
K
MY
CY
Y
CM
C
M
180°
+20°
-20°
1 2
3
Assembly and adjustment
STV-021-V1.0-instr.pdf 24 14/09/16 6:01 p.m.
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call
CMY
K
MY
CY
Y
CM
C
M
Number part: STV-021 Brand: Steren
CONDITIONS 1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must when warranty service is required. 2. If the product is in the warranty time, the company will repair it free of charge. 3. The repairing time will not exceed 30 natural days, from the day the claim was received. 4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses THIS WARRANTY IS VOID IN THE NEXT CASES: If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructi repair by unauthorized personnel, improper safe keeping, among others. a) The consumer can also claim the warranty service in the purchase establishment. b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION Name of the retailer ____________________________________ Address _____________________________________________ Product ______________________________________________ Brand _______________________________________________ Serial number _________________________________________ Date of delivery _______________________________________

Public link updated
The public link to your chat has been updated.
Advertisement