- Computers & electronics
- Networking
- Network media converters
- TP-LINK
- Enlarge Your Ethernet Network
- Installation Guide
TP-Link TL-FC111A-20 10/100 Mbps WDM Media Converter Installation Guide
Add to my manuals2 Pages
TP-LINK TL-FC111A-20 is a 10/100 Mbps WDM Media Converter, designed to extend your Ethernet network by connecting devices with and without optical interfaces. It supports 100BASE-TX twisted-pair and 100BASE-FX fiber connections, making it ideal for connecting devices such as computers, switches, and access points over long distances. With its compact size and easy installation, the TL-FC111A-20 is a versatile solution for expanding your network's reach and enhancing its performance.
advertisement
Enlarge Your Ethernet Network
10/100 Mbps WDM Media Converter
LED Explanation
PWR
On: Power on
Off: Power off
Link/Act
On: Valid link
Flashing: Transmitting or receiving data
Off: Invalid link
Package Contents: Converter, Power Adapter, Installation Guide
Scenario 1: Connect Devices with and without Optical Interfaces
Media Converter
Ethernet Device with Optical Interfaces
PWR
100BASE-X (Fiber) Interface
10/100M
LC-SC Fiber Cable
Fast Ethernet
Twisted-Pair Cable
Ethernet Device without Optical Interfaces
Scenario 2: Connect Devices without Optical Interfaces
Ethernet Device without Optical Interfaces
Media Converter Media Converter
10/100M
PWR
Fast Ethernet
PWR
10/100M
SC-SC Fiber Cable Twisted-Pair Cable
Note: Please use one TL-FC111A-20 and one TL-FC111B-20 to work properly.
Specifications
General Specifications
Standards IEEE 802.3, IEEE 802.3i, IEEE802.3u
LED
Connector
Twisted-Pair
Fiber
Wave Length
Power
PWR, Link/Act
1 SC fiber optic; 1 RJ45 jack
100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (≤100 m)
9/125 μm single-mode fiber (≤20 km)
TL-FC111A-20: 1550 nm TX, 1310 nm RX
TL-FC111B-20: 1310 nm TX, 1550 nm RX
External Power Adapter: 5 V/0.6 A
Dimensions 94.5*73*27 mm
Fast Ethernet
Twisted-Pair Cable
Ethernet Device without optical Interfaces
Environmental and Physical Specifications
Operating Temperature 0˚C to 50˚C (32˚F to 122˚F)
Storage Temperature -40˚C to 70˚C (-40˚F to 158˚F)
Operating Humidity 10% to 90% RH non-condensing
Storage Humidity 5% to 90% RH non-condensing
To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com
to join TP-Link
Community.
For technical support and other information, please visit https://www.tp-link.com/support , or simply scan the QR code.
If you have any suggestions or needs on the product guides, welcome to email [email protected]
.
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards
- Auto-negotiation of Half-Duplex/Full-Duplex transfer mode
- Adopts WDM technology, transmitting and receiving data on one single fiber
- Extends fiber distance up to 20km