Storehouse 63151 30 Bin Wall Mount Parts Rack Owner's Manual

Add to my manuals
4 Pages

advertisement

Storehouse 63151 30 Bin Wall Mount Parts Rack Owner's Manual | Manualzz
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
REV 16b
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2016 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Specifications
Weight Capacity
Large Bins = 3-1/2 lb each
Small Bins = 2 lb each
Material
Polypropylene
Important Safety Information
Installation Precautions
1.
Install only according to these
instructions. Improper installation
can create hazards.
2.
Wear ANSI-approved safety goggles
and heavy-duty work gloves
during installation.
3.
Keep installation area clean and well lit.
4.
Keep bystanders out of the
area during installation.
5.
Do not install when tired or when under
the influence of drugs or medication.
6.
Weight capacity and other product
capabilities apply to properly and
completely installed product only.
7.
Mount on a solid wood surface
capable of supporting product’s
fully loaded weight.
8.
Carefully inspect the mounting area
to make sure there are no hidden
electrical wires, cables or pipes.
4.
Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Use Precautions
1.
This product is not a toy. Do not allow
children to play with or near this item.
2.
Use as intended only.
3.
Inspect before every use; do not use
if parts are loose or damaged.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
Page 2
For technical questions, please call 1-888-866-5797.
Item 63151
Installation Instructions
Note: The Board can be split on
the center line and used as two
separate Boards, if desired.
3.
After checking the mounting area for
hidden wiring, drill 8 holes to hold
1/8" wood screws, at least 2" long.
4.
Mount the Mounting Board (3) using
8 wood screws (sold separately).
1.
Orient the Mounting Board (3) so that
the bin slots open on top, as shown.
2.
Place the Mounting Board (3) against
5.
the mounting surface and line up
with a level (sold separately). Mark 8
mounting holes across the joined board.
Mount Bins onto the Mounting Board
by hanging the back lip of the Bins on
the Board’s slots. The Small Bins (1)
mount in the upper 3 rows and the
Large Bins (2) in the lower 2 rows.
Parts List and Diagram
Part
1
2
3
Description
Small Bin
Large Bin
Mounting Board
Qty.
18
12
1
Slots open
on top
3
1
2
Item 63151
For technical questions, please call 1-888-866-5797.
Page 3
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany
the merchandise. If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily
and quickly provide you with a replacement. We will return repaired products at our expense,
but if we determine there is no defect, or that the defect resulted from causes not within
the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement