Vulcan 63179 Heavy Duty Large Welding Cabinet Owner's Manual
Vulcan 63179 is a versatile welding cabinet designed to provide organized storage and easy access to welding equipment and accessories. With a weight capacity of 500 lbs, it can support a welder and various tools. The top shelf, measuring 34-1/2" W x 20-1/4" L, offers ample space for a welder, while the three cabinet shelves, each measuring 16" W x 19-1/2" L, can accommodate welding helmets, tanks, and other gear.
Advertisement
Advertisement
Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
REV 16h
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright
©
2016 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Specifications
Component
Top Shelf
Drawer A
Drawer B (x2)
Cabinet Shelf (x3)
Door Bin (x3)
Helmet Cabinet
Cylinder Platform
Size
34-1/2″ W x 20-1/4″ L
12-3/4″ W x 16-3/8″ L x 1-1/4x″ H
12-3/4″ W x 16-3/8″ L x 4-1/2″ H
16″ W x 19-1/2″ L
–
14″ W x 19-1/2″ L
Up to two 9" Cylinders
Weight Capacity
160 lb
40 lb
80 lb each
40 lb each
5 lb each
40 lb
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
Use Precautions
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply to properly and completely assembled product only.
1. This product is not a toy. Do not allow children to play with or near this item.
2. Use as intended only.
3. Inspect before every use; do not use if parts are loose or damaged.
4. Do not exceed listed weight capacity for individual components, evenly distributed from bottom up, or overall combined weight capacity of 500 lb.
Be aware of dynamic loading!
Sudden load movement may briefly create excess load causing product failure.
5. Do not open more than one loaded drawer at a time to avoid tipping.
6. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
7. Operate and store the Cabinet on a flat, dry, level surface.
8. Read welding equipment manual before use.
9. If using gas cylinders, be especially careful to prevent tipping or damage to the cylinders.
Follow gas cylinder supplier’s and gas supplier’s safety instructions at all times.
10. People with pacemakers should consult their physician(s) before use.
Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
Page 2
For technical questions, please call 1-888-866-5797.
Item 63179
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note:
For additional information regarding the parts listed in the following pages, refer to
Parts List and Diagram
on page 10.
Functions
Large Shelf for Welders
Small
Divided
Drawer
Large
Drawers
Helmet
Storage
Cabinet
Handle
Cable
Hooks
Locking Cabinet with Adjustable
Shelves and
Storage on Door
TIG Rod
Holders
Cylinder
Racks and
Chains
Cable
Hooks
Cylinder
Platform
Item 63179
For technical questions, please call 1-888-866-5797.
Page 3
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
Note:
Tighten all hardware securely.
Note:
There are Handle Bolts (18) that are shorter than the other Bolts (1 & 5).
Set them aside before beginning assembly.
Attach Casters
Attach two Locking Swivel Casters (4) to bottom of Cabinet with eight sets of Washers (3),
Spring Washers (2), and Caster Bolts (1).
Locking
Swivel
Caster (4)
Spring
Washer (2)
Washer
(3)
Caster
Bolt (1)
Attach Cylinder Platform
Attach Cylinder Platform (6) to bottom of Cabinet with six Bolts (5).
Cylinder
Platform (6)
Bolt
(5)
Attach Wheels
Attach two Wheels (9) to Axle with Washers (8),
Spring Washers (2), and Cap Nuts (7).
Page 4
Axle
Washer
(8)
Cap
Nut (7)
Spring
Washer (2)
For technical questions, please call 1-888-866-5797.
Wheel
(9)
Item 63179
Attach Cylinder Racks
Attach Cylinder Racks (14) to end of
Cabinet with four Bolts (5).
Bolt (5)
Cylinder
Rack (14)
Attach TIG Rod Holder
Attach Top TIG Rod Holder (16) and
Bottom TIG Rod Holder (17) to back of Cabinet with four Bolts (5).
Bolt (5)
TIG Rod
Holder (16)
Bolt (5)
TIG Rod
Holder
Bracket (17)
Item 63179
For technical questions, please call 1-888-866-5797.
Page 5
Attach Cable Hooks
Attach Cable Hooks (15) to back and side of Cabinet with eight Bolts (5).
Cable
Hook (15)
Bolt (5)
Attach Handle
Attach Handle (19) to side of Cabinet with the slightly shorter Handle Bolts (18).
Handle
(19)
Handle
Bolt
(18)
Page 6
For technical questions, please call 1-888-866-5797.
Item 63179
Operation
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
1. Make sure that the welder and all accessories combined do not exceed the weight capacity of this Cabinet.
3. Place the welder on the top shelf and other accessories in the Drawers and Cabinets.
2. Place gas cylinders on Cylinder Platform, then secure in place by locking Cylinder Chains into the slots on the Cylinder Racks.
4. Make sure everything is secure and the Cabinet is well balanced before moving the Cabinet.
If the welder is unstable or does not fit securely on the top shelf, do not use that welder with this Cabinet.
Maintenance
Procedures not specifically explained in this manual must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged, have the problem corrected before further use.
1.
PERIODICALLY,
inspect the general condition of the Cabinet. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• brake operation,
• caster swivel function and movement,
• cracked or broken parts,
• any other condition that may affect its safe operation.
2. Wipe external surfaces of the
Cabinet with clean cloth.
3. Lubricate Drawer Slides as needed.
Item 63179
For technical questions, please call 1-888-866-5797.
Page 7
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Page 8
For technical questions, please call 1-888-866-5797.
Item 63179
Record Serial Number Here:
Note:
If product has no serial number, record month and year of purchase instead.
Note:
Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
Item 63179
For technical questions, please call 1-888-866-5797.
Page 9
Parts List and Diagram
Parts List
Part Description
1 Caster Bolt M8x14
2 Spring Washer Ø8
3 Washer Ø8
4 4'' Locking Swivel Caster
5 Bolt M6x12
6 Cylinder Platform
7 Wheel Cap Nut M8
8 Washer Ø8
9 8'' Rubber Wheel
10 Helmet Cabinet
11 Drawer B
12 Drawer A
Qty
8
1
2
1
2
2
2
10
8
2
22
1
Part Description
13 Top Drawer Divider
14 Cylinder Rack
15 Cable Hook
16 Top TIG Rod Holder
17 Bottom TIG Rod Holder
18 Handle Bolt M6x10
19 Handle
20 Cabinet
21 Locking Cabinet
22 Adjustable Shelf
23 Cylinder Chain
Qty
1
1
1
1
2
2
2
4
1
1
4
Page 10
For technical questions, please call 1-888-866-5797.
Item 63179
Assembly Diagram
9
8
2
7
6
11
10
13
12
14
5
23
5
22
21
4
3
2
1
20
15
5
16
18
19
15
5
17
5
Item 63179
For technical questions, please call 1-888-866-5797.
Page 11
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797

Public link updated
The public link to your chat has been updated.
Advertisement