U.S. General 64441 Owner's manual

U.S. General 64441 Owner's manual
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2019 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19e
Specifications
Total Combined Weight Capacity
(Evenly distributed from bottom up.
Including side and top cabinets.)
Page 2
2600 lb
For technical questions, please call 1-888-866-5797.
Roller Cabinet
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
3. Keep assembly area clean and well lit.
7. Assemble on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Cabinet.
4. Keep bystanders out of the area during assembly.
Use Precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
2. This product is not a toy nor a toy chest.
Do not allow children to play with or near this item.
3. Do not use as furniture.
4. Do not exceed weight capacities,
evenly distributed from bottom up.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
5. Do not open more than one Drawer at once.
6. Empty, close and lock Drawers before moving.
7. Use only on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Cabinet.
Do not roll Cabinet over concrete seams
or other rough/uneven surfaces.
Roller Cabinet
8. Do not lift using handle.
Do not move or lift while loaded.
9. To prevent tipping, move using supplied
handle on Bottom Cabinet only.
10. Lock Swivel Casters after moving.
11. Do not mount on truck bed or
any other moving object.
12. Use as intended only.
13. Inspect before every use;
do not use if parts are loose or damaged.
14. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
For technical questions, please call 1-888-866-5797.
Page 3
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
1. Assemble on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Cabinet.
4. Attach two Fixed Casters (13) to the other
side using eight Caster Bolt Sets (14).
2. Attach Side Handle (3) to either side of Cabinet using
Handle Bolts (2).
Fixed
Caster
Washer
Spring
Washer
Handle
Bolt
Side
Handle
Bolt
Handle Bolt
Figure C
5. Lock the Casters by depressing the brake levers.
Figure A
3. Attach two Locking Swivel Casters (15) to the same
side as Handle using eight Caster Bolt Sets (14).
6. If using Top Chest, assemble according
to its Owner’s Manual.
Locking
Swivel
Caster
Brake
Lever
Washer
Spring
Washer
Bolt
Figure B
Final Assembly
1. Using an assistant, place EMPTY Top Chest
on top of Bottom Cabinet.
2. WARNING! Make sure the Top Chest is
seated inside the Bottom Cabinet’s edges.
Top
Chest
Edge
Edge
Bottom
Cabinet
Figure D
Page 4
For technical questions, please call 1-888-866-5797.
Roller Cabinet
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Empty all Drawers.
2. Close all Drawers and lock them.
3. Unlock Swivel Casters.
4. To prevent tipping, move using supplied
handle on Bottom Cabinet only.
5. Roll Cabinet to a flat, level, hard and smooth
surface capable of safely supporting a fully
loaded Cabinet. Do not roll Cabinet over concrete
seams or other rough/uneven surfaces.
6. Lock Swivel Casters.
7. Unlock Drawers and fill Cabinet evenly, from
bottom to top. Do not exceed weight capacities.
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged,
have the problem corrected before further use.
1. PERIODICALLY, inspect the general
condition of the Cabinet. Check for:
• loose hardware,
2. Wipe external surfaces of the
Cabinet with clean cloth.
3. Lubricate Drawer Slides as needed.
• misalignment or binding of parts,
• brake operation,
• caster swivel function and movement,
• cracked or broken parts,
• any other condition that may
affect its safe operation.
Roller Cabinet
For technical questions, please call 1-888-866-5797.
Page 5
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Parts List and Diagram
Parts List
Part
1
2
3
4
5
6
7
8
9
10
11
12
13
Description
Top Shelf Liner
Handle Bolt
Side Handle
Drawers B & C Label
Drawers B & C Handle
Drawers D & E Label
Drawers D & E Handle
Drawer A Label
Drawer A Handle
Drawers B & C Liner
Drawers D & E Liner
Drawer A Liner
Fixed Caster
Record Serial Number Here:
Note: If product has no serial number, record
month and year of purchase instead.
Page 6
Qty
Part
1
2
1
6
6
6
6
1
1
6
6
1
2
14
15
16
17
18
19
20
A
B
C
D
E
Description
Caster Bolt Set
Locking Swivel Caster
Lock
Key (not shown)
Latch
Lock Bar
Drawer Slide
Drawer
Drawer
Drawer
Drawer
Drawer
Qty
16
2
1
4
1
1
32
1
5
1
5
1
Note: Some parts are listed and shown for
illustration purposes only, and are not available
individually as replacement parts. Parts may not be
interchangeable. Specify number when ordering.
For technical questions, please call 1-888-866-5797.
Roller Cabinet
Assembly Diagram
1
12
19
8
18
16
A
2
B
3
9
2
10
4
D
C
13
11
5
6
7
E
20
15
14
Roller Cabinet
For technical questions, please call 1-888-866-5797.
Page 7
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement