Ohlins 18108-01 Protective Sleeve TTX22M Mounting Instruction
PDF
Download
Document
Advertisement
Advertisement
mounting instructions
Protective Sleeve
1
Warning!
If you have any questions or insecurities regarding the installation procedure, please contact an Authorized Specialized Service Center.
1
Remove the old protective sleeve carefully with a knife.
2
Use a heat gun to carefully warm up the new protective sleeve.
3
Slide the protective sleeve on the shock absorber body. Note the groove on the shock absorber body and the bevel on the protective sleeve, make sure that the protective sleeve is correctly inserted.
2
3
MI_18108-01_1
Issued 2013-06-07
1/1

Public link updated
The public link to your chat has been updated.
Advertisement