GRUNDIG
Cooker hood
User Manual
»
GDI 5795 BX
EN
185.7304.65/R.AC/15.11.2019
7702389217
Please read these instructions first before using your appliance
Thank you for choosing a Grundig appliance.
Please take some time to read this user manual before using your appliance, to ensure you
know how to safely operate the controls and functions.
Carefully follow all unpacking and installation instructions to ensure the appliance is correctly
connected and fitted prior to use.
Please write your product model and serial number on the last page of this user manual, and
store in a safe location close to the appliance for easy future reference.
This user manual may also be applicable for several other models. Differences between
models will be listed.
If you have any questions or concerns, please call our contact centre or find help and
Information online at www.grundig.co.uk
Explanation of symbols used throughout this User Manual
. Important information or useful
| 1 4 hints about usage.
Warning of hazardous situations
with regard to life and property.
Warning of electric shock.
Warning of risk of fire.
Warning of hot surfaces.
Arcelik A.S.
Karaogag caddesi No:2-6 —
34445 Sitlice/ Istanbul /TURKEY
CE Made in TURKEY
TABLE OF CONTENTS
1 Important instructions and
warnings for safety and
environment 4
General safety... 4
Electrical safety... 9
Product safety 6
Intended use... /
Children's safety... /
Disposing of the old product.......... 8
Package information...................... 8
HI General information 9
VE VIE Were 9
Scope of delivery o.oo. 10
Technical specifications............ 10
El Installation 12
Installation... 12
Future transportation ............... 18
3/EN
Operating the hood 19
Controller... e ee 21
5 Maintenance and care 25
General information ..................... 25
Replacing the lamp .................... 26
A Troubleshooting 27
Guarantee Details 28
i Important instructions and warnings
for safety and environment
This section contains safety
Instructions that will help
protect from risk of personal
Injury or property damage.
Failure to follow these
Instructions shall void any
warranty.
General safety
Risk of Toxicating! While
the appliance Is operating,
air In the entire house 15
sucked. If adequate
ventilation 1s not provided,
waste and toxic gasses
which are released as a
result of burning will be
drawn back into the house
through chimney draught.
Do not operate the
appliance together with
sources that may emit
toxic gasses and create air
draught (wood, gas, oil, and
coal stoves, water heaters,
kettles, etc.).
Always have the authorized
persons check the
adequacy of ventilation and
chimney draught in your
building.
The appliance 1s not
Intended for use by
persons (including children]
with reduced physical,
sensory or mental
capabilities, or lack of
experience and knowledge,
unless they have been
given supervised or
Instruction concerning use
of the appliance by a
responsible person for
their safely.
Young children should be
supervised to ensure that
they do not play with the
appliance.Cleaning and
user maintenance
procedures should not be
performed by the children
unless they are under
supervision.
Always have the
Installation and repair
procedures performed by
Authorised Service Agent.
Manufacturer shall not be
held responsible for
damages arising from
4/EN
procedures carried out by
unauthorised persons.
Do not operate the
appliance If it Is defective
or has any visible damage.
Make sure that the
appliance 15 switched off
after every use.
It the product is handed
over to someone else for
personal use or second-
hand use purposes, the
user manual, product
labels and other relevant
documents and parts
should be also given.
Appliance must be
Installed by a qualified
person In accordance with
the regulations in force.
Otherwise, the warranty
Shall become void.
Electrical safety
To get your product ready
for use, firstly you must
have Installation place and
electric wiring prepared.
Later, you may call
Authorised Service nearest
to you.
If It has a failure, the
product should not be
operated without being
repaired by the Authorised
5/EN
Service Agent. There Is the
risk of electric shock!
Never connect the hood
before installation Is
completed.
Never touch the plug with
wet hands! Do not unplug
by pulling from the cable;
always hold by the plug to
unplug.
Product must be
disconnected from the
mains during installation,
maintenance, cleaning and
repair procedures.
It the supply cord Is
damaged, it must be
replaced by the
manufacturer or its service
agent or a similarly
qualified person in order to
avoid a hazard.
Never connect power cable
near to the hobs. If melted
down, cable may lead to
fire.
Any work on electrical
equipment and systems
may only be carried out by
authorised and qualified
persons.
In case of any damage,
switch off the product and
disconnect it from the
mains. To do this, turn off
the fuse at home.
Make sure that fuse
current is compatible with
the product.
Never wash down the
product with water! There
Is the risk of electric shock!
Product safety
The height between the
lower surface of the hood
and upper surface of the
hob should not be less
than 650 mm.
Never touch the hoods
lamp after they operated
for a long time. Hot lamps
may burn your hands.
Never operate the product
without oil filter. Never
remove filters when the
product is In use.
Avoid big flames beneath
the product. Otherwise,
particles on oil filter may
flame up and cause fire.
Turn on the hobs after
placing pans or pots on.
Otherwise, rising
temperature may deform
certain parts of your
product.
Turn off the hobs before
taking away pans or pots.
Avoid inflammable
materials under the hood.
Do not expose the product
to open flames beneath it.
lt can cause oils
accumulated in the filter to
catch fire. Do not operate
the product without filter.
Never leave the cooker
unattended when frying
foods, the oil may flame up
and boiled oil may cause
fire. Thus, be careful about
cloths and curtains.
If the hood Is not
periodically and properly
cleaned, this may cause
burning risk on your hood.
For refreshing the
kitchen's air from cooking
smells and steams, please
turn on your hood for 15
minutes more after
cooking or frying has
ended.
There shall be adequate
ventilation of the room
when the range hood Is
used at the same time as
appliances burning gas or
other fuels. (Not applicable
to appliances that only
discharge the air back into
the room]
6/EN
In the environment where
the hood Is being used, the
exhaust of fuel oil or gas
devices such as room
heater must be absolutely
Insulated or device must be
hermetical type.
If there Is a fuel oil or gas
device In the environment,
the room must be
ventilated sufficiently.
When a non-electrically
operated device Is
concurrently used in the
environment together with
the hood, the negative
pressure in the room must
be maximum 0.4 mbar to
avoid the hood s returning
other device s exhaust into
the room.
Never connect the hood to
Do not hang easily
flammable and
combustible materials on
hood handles.
Our company shall never
be responsible for the
problems arising from the
use against the warnings
above.
There Is a risk of fire it
cleaning is not carried out
In accordance with the
Instructions.
Do not flambé under the
range hood.
Caution: Accessible parts
may become hot when
used with a cooking
appliance.
You are recommended to
clean your filter once a
month in normal use.
the chimneys used for
heaters, waste gas or with
rising flames. Observe
authorities regulations on
the draining of output air.
* When connecting to the
Intended use
This product Is designed for
domestic use. Commercial
use Is not admissible.
The manufacturer shall not be
liable for any damage caused
chimney, use 120-mm by improper use or handling.
diameter pipes. Pipe Children's safety
connection must be as * Keep children away from
short as possible with the product when it is
fewer bends. operating and do not allow
7/EN
them to play with the
product.
e Packaging materials are
dangerous to children.
Keep the packaging
materials in a place where
children cannot reach and
sort and discard them In
accordance with the waste
disposal directives.
e Electrical products are
dangerous to children.
Keep children away from
the product when It Is
operating and do not allow
them to play with the
product.
Disposing of the old product
Compliance with the WEEE
Directive and Disposing of the
Waste Product:
This product complies with EU
WEEE Directive (2012/19/EU). This
product bears a classification
symbol for waste electrical and
electronic equipment (WEEE).
This product has been
manufactured with high quality
parts and materials which can be
reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take It to the
collection center for the recycling of
electrical and electronic equipment.
Please consult your local
authorities to learn about these
collection centers.
Compliance with RoHS Directive:
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
Package information
e Packaging materials of the
product are manufactured from
recyclable materials in
accordance with our National
Environment Regulations. Do
not dispose of the packaging
materials together with the
domestic or other wastes. lake
them to the packaging material
collection points designated by
the local authorities.
8/EN
2 General information
Overview
Hood body
Control panel
Aluminum filter lock
Aluminum filter
N SS © N —
Lamp
9/EN
4. Chimney connection adapter
Scope of delivery
Accessories supplied can vary
{depending on the appliance
model. Not every accessory
described in the user manual
may exist on your appliance.
1. User manual
2. Wall connector
5. Valves to prevent reverse air flow
3. Air directing component
amp power
onsumption
10/EN
{Technical specifications may be Values stated on the markings
changed without prior notice to | fof the product or in other
Improve the quality of the — printed documents supplied
product. with the product are obtained
under laboratory conditions as
per relevant standards.
Depending on operational and
environmental conditions of the
product, these values may vary.
» Y-igures in this manual are
, Aschematic and may not exactly
match the product.
11/EN
3 Installation
Refer to the nearest Authorised
Service Agent for installation of the
product. Make sure that the electric
installations are in place before
calling the Authorised Service Agent
to have the product ready for
operation. If not, call a qualified
electrician and fitter to have the
required arrangements made.
e Y reparation of location and
, delectrical installation for the
product is under installers
responsibility.
ANGER:
\The product must be installed
In accordance with all local
electrical regulations.
ANGER:
\Prior to installation, visually check
If the product has any defects on It.
If so, do not have it installed.
Damaged products cause risks
for your safety.
DANGER:
\Warning: Failure to install the
screws or fixing device In
accordance with the
Instructions may result in
electrical hazards.
Installation
=
E
E
E
©
Lo
©
* min.
There should be a minimum
clearance of 6500 mm between the
top surface of the hob and the
bottom surface of the hood.
The air to be extracted via the hood
should not be connected to a
chimney that is used by other
appliances that use gas or other
fuels. (It does not apply to devices
that only blow the air back into the
room)
The regulations on air exhaust
should be followed.
Electrical connection
Manufactured with 2-track power
cable, this device must be
connected to the mains by an
electrical switch with at least 3mm
clearance between bipolar contact
leads. Have the electrical
12/EN
connections done by a qualified
electrician.
e Install your appliance so that
you can reach the power
connection (plug, outlet) easily
after installation.
* An earthed outlet must be
Installed on basis of the
Installation location of the
chimney or hood.
the moulded plug on this appliance
incorporates a J A fuse. Should the
fuse need to be replaced an ASTA
approved 551562 fuse of the same
rating must be used. Uo not forget
to refit the fuse cover. In the event
of losing the fuse cover, the plug
must not be used untii a
replacement fuse cover has been
fitted. Colour of the replacement
fuse cover must be the same colour
as that visibie on the pin face of the
plug. Fuse covers are available
from any good electrical store,
= pitting a different plug
As the colours of the wires in
the mains lead of this appliance
may not correspond with the
coloured markings identifying
the terminals on your plug,
proceed as follows:
* Brown cable = L [Live]
es Green/vellow cable must be
connected to ground ES line.
With the alternative plugs a 3 A
fuse must be fitted either in the
plug or adaptor or in the mam
fuse box. it in doubt contact a
qualified electrician.
13/EN
Green and yellow
or green
Brown or red
UK_Plug
The following provides necessary
information to prepare the location
for hood installation.
The hood must be installed above
the central axis of the cooking
appliance. There should be a
minimum clearance of 650 mm
between the top surface of the hob
and the bottom surface of the hood.
Please apply the following steps for
the hood's installation.
Before installation, determine the
total height of the hood carrier
assembly and mark the holes for
installation on the ceiling.
1. Center the cooking appliance
and determine your central point
on the ceiling. Mark the hole
positions of the top assembly of
the carrier components provided
with the product onto the ceiling
and drill the holes for the 4
screws supplied.
2. Mount the top assembly of the
carrier components supplied
with the product in a way that it
fits these holes. When making
electrical connection, an outlet
must be installed in a way that it
matches with section À indicated
In the above figure. There is a
gap In this section of the sheet.
3. For electronic models, fix the
electronic mainboard into 115
housing with 4 screws as shown
In the figure below.
. As shown in the figure below,
place the cover (C] -that prevents
reversed air flow- to the chimney
outlet.
9. Place the chimney connection
adapter [D) onto the cover part (C)
that prevents reversed air flow.
6. Using 8 screws, connect the
hood connection body to the
carrier connection component
that has been attached to the
ceiling upon adjusting the hood-
hob distance, as shown in the
figure.
14/EN
7. For chimney connection usage:
In chimney-connected position,
absorbed air will go through oil
filters to the outlet and then will
reach to the chimney though
connection pipes and finally
expelled from the chimney.
Connect one end of the chimney
connection pipe (E) to the chimney
outlet by passing it through the
main body that has been mounted
to the ceiling [you can use tape to
secure it).
You should make sure that the
chimney connection pipes used are
made of fireproof plastic material.
When using flexible connection pipe,
15/EN
It should be considered that sharp
corners and sudden contractions
will have a negative impact on air
suction. The hood must never be
connected to a chimney to which
another device was already
connected.
Connection pipe should not
. dbe larger than 120 mm;
otherwise, proper chimney
connection will be
prevented.
8. Internal circulation (Use with
carbon filter]
In the position of internal circulation,
the air absorbed from the
environment will go through
aluminium filters and carbon filters,
where the smell Is eliminated, and
pass through air directing
component, it is finally sent back to
the environment through the
ventilation grills on the side of the
chimney piece.
Assemble the air directing
component, that is provided as two
separate parts, as shown in the
figure.
Fix the air directing component's
extension parts onto the sides as
shown in the figure above. Then
place the air directing component
into its housing that is found on the
upper side of the connection body
as shown in the figure. You can use
tape on the end parts of the
extension parts to secure.
Remove the front cover plate on the
hood body to attach the carbon
filters. Place lug slots of carbon
filters to the lugs on motor carrier
as shown In the above figure and
turn counter-clockwise to fix 1n
place. Apply the same procedure for
the motor carrier on the other side.
Fix the front cover plate into its
place again using the screws.
Connect one end of the chimney
connection pipe (E) to the air
directing component's outlet (F) by
passing It through the main body
that has been mounted to the
ceiling [you can use tape to secure
it).
You should make sure that the
chimney connection pipes used are
made of fireproof plastic material.
When using flexible connection pipe,
It should be considered that sharp
corners and sudden contractions
will have a negative impact on air
suction. The hood must never be
connected to a chimney to which
another device was already
connected.
ÿConnection pipe should not
. dbe larger than 120 mm;
otherwise, proper chimney
connection will be
prevented.
16/EN
e YFailure to clean and service
oil filters periodically and
failure to replace carbon
filters at the end of service
life (approximately 4
months) may have the risk of
causing fire.
9. Installation of chimney
Pass the upper chimney casing (6)
through the connection body and fix
It using two screws as shown in the
figure.
Pass the lower chimney casing (H)
through the connection body and
attach it onto the upper chimney
casing. Attach a screw to one of the
holes on the main body as shown In
the figure (do not tighten it too
much] to prevent the lower chimney
casing from falling.
17/EN
10.Pass the upper body of the hood
through the main body that has
been mounted. While the hood Is
In this position, attach the air
outlet pipe (E] to the chimney
connection adapter (D]
11.Using 4 screws, fix it to the main
body as shown in the figure.
Remove the screw that secures
the lower chimney and take
down the lower chimney as
shown.
You may use the hood in two
ways:
1-Chimney-connected use
The steam Is expelled via chimney
pipe which Is secured to the
connection ring on the hood.
Diameter of chimney pipe should be
equal to connection ring. To allow
the air easily going out of the room
In horizontal arrangements, the
pipe should be slightly tilted
upwards (approximately 10°).
Nf the carbon filter is installed
| Jon your hood, remove It when
“using the hood with the
chimney.
2- Use with no chimney connection
Air is filtered through carbon filter
and returned to the room. Carbon
filter 1s used when there is no
chimney in the house or when it is
Impossible to install a chimney pipe.
e Install the carbon filter as
described in the installation
section.
Future transportation
* Keep the product's original
carton and transport the
productin it. Follow the
Instructions on the carton. If you
do not have the original carton,
pack the product in bubble wrap
or thick cardboard and tape it
securely.
{Do not place any objects onto
the product and move it in
upright position.
в YCheck the general appearance
. dof your product for any
“damages that might have
occurred during transportation.
18/EN
Operating the hood
Hood Is equipped with a motor with
various speed settings.
For a better performance, we advise
you to use low speeds In normal
conditions, and high speeds when
smell and vapors are intensified.
On/off button / Speed!
Speed?
Speed3 / Booster
Function key
Lamp key
O a RP LON —
Display
Auto off symbol
e,
=
=
_—
Booster symbol
Filter full warning symbol
Air filter mode symbol
Quiet mode symbol
* 3 XE
Lamp symbol
Operating the hood
1. To turn on the hood, touch the
on/off key.
2. To change the speed, touch
Speed? and Speed 3 keys.
» Speed level of the hood shall be
displayed.
19/EN
If you do not touch any key while
. Âthe product is operating, the
lamp and the levels work up to
6 hours.
Auto off mode
1. Touch the function key when the
appliance Is operated at a certain
speed. Auto off mode will be
activated and © symbol is
displayed.
2. Appliance shall be turned off
automatically after operating for
20 minutes at the set level.
3. Touch the function key to disable
the auto-off mode.
4. The auto-off mode cannot be
cancelled by touching the lamp
and speed level keys.
Activating intense ventilation
mode (Booster)
Touch the speed3 key for more than
two seconds. Intense ventilation
mode will be activated and P and #
symbol shall be displayed, and the
appliance will be active for
maximum 10 minutes. After 10
minutes, It will continue to operate
In Speed 3 position.
During intense ventilation, If any of
the speed keys Is touched then the
operation will continue in that
speed level.
Turning off the hood
1. Touch the off key for 2 seconds
while your hood is operating at a
certain speed.
Operating the lamp
1. Touch the lamp key to turn on
the lamp.
Lamp illuminates and % symbol is
displayed.
Turning off the lamp
|. To turn off the lamp, press the
lamp switch with short intervals
until %¥ symbol disappears.
Lamp is turned off and the %
symbol on the display disappears.
Off key does not turn off the
Æ jlamp, it only stops operation
of the hood.
—
Changing the lamp light level
You can set the lamp to 3 levels.
1. Press the lamp button and then
It will turn on and 1st level Is
selected. Press the lamp button
to increase the lighting level.
Each press will increase the
level by 1. After the last level, the
lamp will turn off.
Air filter mode
1. Touch the function key when the
appliance Is not operated at any
speed.
» Air filter mode will be activated
and C and X symbol is displayed.
2. Air filter mode will operate for 10
minutes at speed 1 level and
then stops for 50 minutes within
1 hour. If the air filter mod will
not turned off, it will continue to
operate for 10 minutes and stops
50 minutes for each each hour
during 24 hours.
s You can utilize air filter
‚ AMode to remove odor found
“in-house in long term using
low speed.
Turning off the air filter mode
1. Turn off the air filtering mode by
touching any speed key or
touching the off key while the air
filtering mode Is active.
Fe While the air filter mode is
active, when you turn on and
off the appliance at any
speed level, air filter mode
Shall not be remembered.
While the air filter mode 15
active, the program will be
canceled if there is a
blackout.
Filter full warning
After every 100 hours operation, E
symbol and the set level flashes in
turn on the display. Also, & symbol
appears on display. Clean your filter.
Filter full warning will not reset
automatically after cleaning.
Filter full warning may be reset by
pressing function and speed3
buttons for 3 seconds
simultaneously.
Fe YWhen the hood gave filter full
Lo e warning, the warning will not be
reset If there is a blackout.
Quiet mode
You may prevent key clicks from the
hood by activating the quiet mode.
Touch the function key until #%
symbol is displayed to switch to
20/EN
quiet mode. Touch the function key
until 49 symbol is disappeared from
the display to cancel the quiet mode.
Controller
You may also control your appliance
with the remote controller.
The dot sign on the display flashes
twice for each operation of the
controller keys when the hood Is
operated with the controller
On/off button
or Increase speed button
_ Decrease speed button
++ Air filter mode button
5 Auto off button
J Booster button
Filter full warning off button
с) Quiet mode button
21/EN
©”) Quiet mode cancel button
X Lamp button
ju Lamp lighting level increase
button
—_ Lamp lighting level decrease
button
Operating the hood with the
controller
1. To turn on the hood, touch the
on/off key on the controller.
» Hood starts to operate at speed].
2. Press Speed increase and/or
Speed decrease buttons to
change the speed level.
» Speed level of the hood shall be
displayed.
Never press on two buttons at
, пе same time.
If you do not touch any key while
‚ the product is operating, the
lamp and the levels work up to
6 hours.
Turning off the hood with the
controller
1. Press on the on/off key on the
controller when the hood Is
operating in a certain speed.
Turning the auto off mode on
with the controller
1. Press the € button on the
controller while the appliance Is
operated at a certain speed. Auto
off mode will be activated and &
symbol is displayed.
2. Appliance shall be turned off
automatically after operating for
20 minutes at the set level.
Activating intense ventilation
mode (Booster) with the
controller
Press the ¥ button on the
controller while the appliance Is
operated at any speed level. Intense
ventilation mode will be activated
and P and ¥ symbol shall be
displayed, and the appliance will be
active for maximum 10 minutes.
After 10 minutes, 1t will continue to
operate in Speed 3 position.
Press speed increase or decrease
buttons to quit the intense
ventilation mode. Operation will
continue in the selected speed level.
Operating the lamp with the
controller
1. Press on the button% to operate
the lamp.
» Lamp illuminates and ¥ symbol is
displayed (In models with lamp
symbol on the screen).
Turning off the lamp with the
controller
1. Press on the lamp * again to
turn off the lamp.
» Lamp is turned off and the %
symbol on the display disappears
[In models with lamp symbol on the
screen).
Changing the lamp light level
via the controller
You can set the lamp to 3 levels.
1. Pressing + switch will increase
the lighting level.
2. Pressing - switch will decrease
the lighting level.
You may turn the lamp on and
. doff while hood is turned off.
On/Off button does not turn off
dthe lamp, it only stops operation
of the hood.
Turning the air filtering mode
on with the controller
1. When the appliance Is not
operated, press =5 button without
pressing on/off button on the
controller.
» Air filter mode will be activated
and C and & symbol is displayed.
2. Air filter mode will operate for 10
minutes at speed 1 level and
then stops for 50 minutes within
1 hour. If the air filter mod will
not turned off, it will continue to
operate for 10 minutes and stops
50 minutes for each each hour
during 24 hours.
y You can utilize air filter
mode to remove odor found
In-house in long term using
low speed.
Turning the air filtering mode
off with the controller
1. Turn off the air filtering mode by
pressing speed increase, on/off
key or ¥r key while the air
filtering mode Is active.
22/EN
While the air filter mode is
| active, when you turn on and
off the appliance at any
speed level, air filter mode
shall not be remembered.
While the air filter mode 1s
lactive, the program will be
canceled if there Is a
blackout.
Turning off the filter full
warning with the controller
After every 100 hours operation, E
symbol and the set level flashes in
turn on the display. Also, & symbol
appears on display. Clean your filter.
Filter full warning will not reset
automatically after cleaning.
Press the & button on the control to
turn off the filter full warning.
`@ YWhen the hood gave filter full
warning, the warning will not be
reset if there is a blackout.
Activating the quiet mode with
controller
You may prevent key clicks from the
hood by activating the quiet mode.
Press the button on the
controller to switch to quiet mode.
7 Symbol appears on display. Press
CI) button to activate key clicks by
canceling the quiet mode. % symbol
disappears.
23/EN
Replacing the battery of the
controller
7
1. Remove the cover from the point
Indicated with arrow and open
the battery compartment.
2. Place the CR2016 type battery.
3. Close the cover of battery
compartment.
в VBatteries may be dead If
, Ayour appliance does not
react completely to the
commands given by the
controller. Discharged
batteries shall never be kept
in battery compartment.
Manufacturer shall not be
held responsible for
damages caused by used
batteries.
Note on the environment
Pb
This symbol, available on the
battery or on the product package,
Indicates that the battery delivered
with this product shall not be
considered as universal waste. This
symbol may be used with a
chemical symbol on some batteries.
HG chemical symbol is added If the
amount of mercury in the batteries
IS higher than 0.0005%; and Pb
chemical symbol Is added If the
amount of lead in the batteries Is
higher than 0.004%. Including the
ones without heavy metals,
batteries shall not be disposed with
household waste. Please dispose of
used batteries in an
environmentally friendly manner.
Learn the regulations in your local
area.
24/EN
5 Maintenance and care
General information
Service life of the product will
extend and frequent problems will
decrease If the product is cleaned
DANGER:
Disconnect the product from mains
supply before starting maintenance
and cleaning works.
There is the risk of electric
shock!
e (lean the product thoroughly
after each use. In this way it will
be possible to remove cooking
residues more easily, thus
avoiding these from burning the
next time the appliance Is used.
* No special cleaning agents are
required for cleaning the
product. Use warm water with
washing liquid, a soft cloth or
sponge to clean the product and
wipe It with a dry cloth.
Do not use cleaning agents that
contain acid or chloride to clean
the stainless or inox surfaces
and the handle. Use a soft cloth
with a liquid detergent (not
abrasive) to wipe those parts
clean, paying attention to sweep
In one direction.
Fe he surface might get damaged
à Æ jby some detergents or cleaning
materials.
Do not use aggressive
detergents, cleaning
powders/creams or any sharp
objects during cleaning.
25/EN
Do not use steam cleaners for
Acleaning.
Aluminum filter
This filter captures oil particles In
the air. You are recommended to
clean your filter once a month in
normal use. Please firstly remove
aluminum filters for this process.
Wash the filters in liquid-detergent
water and install them after drying.
Aluminum filters might change
colour in time due to washing. This
Is normal and you don't need to
replace the filter.
{You can also wash aluminum
Aflters in dishwasher.
Removing aluminum filters
1. Push aluminum filter lock
forward.
2. Slightly lower the filter and pull
forth. Otherwise, you may bend
the filter.
3. After washing, reverse the steps
above to re-install the aluminum
filter.
Carbon filter (Use without
chimney)
# Carbon filter should never be
| fwashed.
It should be replaced once every 4
months in normal use. You may
obtain carbon filters from the
Authorised Service.
The lamp used In this appliance
lis not suitable for household
room Illumination. The intended
purpose of this lamp Is to assist
the user to see foodstuffs.
Replacing the lamp
/A\ DANGER:
Before replacing the lamp, make
sure that the product is
disconnected from mains in order
to avoid the risk of an electrical
shock. If hot, let the lamp cool
down.
Hot surfaces may cause burns!
Use only with self-shielded
tungsten halogen lamps or self-
shielded metal halide lamps.
For the specifications of the
lamp, see Technical
specifications, page 10. Oven
lamps can be obtained from
Authorised Service Agents.
# Position of lamp might vary
| {from the figure.
1. Remove the lamp pressing it
towards its seat In clockwise
direction (1) and then remove
turning it in counterclockwise
direction (2)
2. Insert the new lamp turning it in
clockwise direction.
3. A click” will be heard when the
lamp Is secured in its place.
26/EN
Hl Troubleshooting
e [he mains fuse Is defective or has tripped. >—>—> Check fuses in the
fuse box. If necessary, replace or reset them.
e Product is not plugged into the socket. >>> Check the plug
connection.
* Speed button might not be set. >—>— Press the required speed
button.
* Power is cut. >>> Check if there is power. Check the fuses in the
lace or reset the fuses.
* Hood lamp Is defective. >—>—> Replace the hood lamp.
* Power is cut. >>> Check if there is power. Check the fuses in the
fuse box. If necessary, replace or reset the fuses.
1Consult the Authorised Service
Agent or the dealer where you
have purchased the product if
you cannot remedy the trouble
although you have implemented
the instructions in this section.
Never attempt to repair a
defective product yourself.
27/EN
Guarantee Details
GRUNDIG UK AND IRELAND STANDARD MANUFACTURER GUARANTEE TERMS AND
CONDITIONS
Your new Grundig product is guaranteed against faulty materials, defective components or
manufacturing defects.
The standard guarantee starts from the date of original purchase of the product, and lasts
for a period of thirty six (36) months unless Beko plc (the “Manufacturer”) agrees to extend
the guarantee for the product in writing.
If you have registered the product within 90 days of purchase by completing the online
registration form, then the standard 36 month guarantee will be extended to 60 months,
under the same terms and conditions as detailed below
If you have any questions about the guarantee on your product (including how long it is valid),
please contact your retailer or our contact centre on 0333 207 9920 (UK and Northern
Ireland) or 01 691 0203 (Republic of Ireland)
This guarantee does not in any way diminish or affect your statutory rights in connection
with the product. This guarantee 1s in addition to your statutory rights as a consumer. If you
have any questions about these rights, please contact the retailer from which you
purchased the product. In certain circumstances, it is possible that your statutory rights
may offer additional or higher levels of protection than those offered under the terms of this
guarantee.
What is covered by this guarantee?
e Repairs to the product required as a result of faulty materials, defective compo-
nents or manufacturing defects.
e Functional replacement parts to repair a product.
e The costs of a Grundig Approved Engineer to carry out the repair.
What is not covered?
e Transit and delivery damage.
e (Cabinet or appearance parts, including but not limited to control knobs, flaps and
handles.
e Accessories and/or consumable items including but not limited to ice trays, scrap-
ers, cutlery baskets, filters and light bulbs.
e Repairs necessary as a direct or indirect result of:
— Accidental damage, misuse or abuse of a product.
—- An attempted repair of a product by anyone other than a Grundig Ap-
proved Engineer (the “Engineer”.
28/EN
— Installation or use of a product where such installation or use fails to
meet the requirements contained in this guarantee or the User Instruc-
tions Booklet.
Repairs to a product operated at any time on commercial or non-residential
household premises (unless we have previously agreed to the installation envi-
ronment).
This guarantee is limited to the cost of repairing the product. To the extent permitted by law,
the Manufacturer does not accept and will not be held liable for any financial loss incurred
In connection with the failure of any product to operate in accordance with the expected
standards. Such financial loss includes but is not limited to loss arising from:
Time taken off work.
Damaged food, clothing or other items.
Meals taken at restaurants or from takeaways.
General compensation for inconvenience.
Important Notes
1.
2.
29/EN
Your product is designed and built for domestic household use only.
The guarantee will automatically be void if the product is installed or is used in
commercial or non-residential domestic household premises, unless we have pre-
viously agreed to the installation environment.
The product must be correctly installed, located and operated in accordance with
the instructions contained in the User Instructions Booklet provided with your
product.
Professional installation by a qualified Electrical Domestic Appliance Installer is
recommended for all Washing Machines, Dishwashers and Electric Cookers las in-
correct installation may result in you having to pay for the cost of repairing the
product).
Gas Cookers must be professionally installed by a Gas Safe [or Gas Networks lre-
land for Republic of Ireland) registered gas installer.
This guarantee is given in respect of products purchased and used within the
United Kingdom and the Republic of Ireland.
This guarantee 1s effective from the initial date of purchase of a new product from
an authorised retailer and will be void if the product is resold.
This guarantee does not apply to graded sales (where the product is purchased as
a second”).
Possession of a copy of these terms and conditions does not necessarily mean that
a product has the benefit of this guarantee. If you have any questions, please call
our Call Centre on the number set out above.
. The Manufacturer reserves the right to terminate the guarantee If its staff or rep-
resentatives are subjected to physical or verbal abuse in the course of carrying out
their duties.
. Optional extras, where available (i.e. extendable feet] are supplied on a chargeable
basis only.
Does Grundig offer replacements?
This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion,
replace your product with a new product instead of carrying out a repair. Where a
replacement is offered, this would normally be an identical model but when this is not
possible, a model of similar specification will be provided. The Manufacturer will cover the
costs and arrange for the delivery of the new product and for the return of the old product.
Any costs related to disconnecting the faulty product and installing the replacement product
will not be borne by the Manufacturer unless previously agreed to in writing. The original
guarantee will continue to apply to the replacement product; the new product will not come
with a new guarantee.
When will the repair take place?
Our Engineers work Monday to Friday 9.00am to 5.00pm. Appointments outside these hours
may be possible at the sole discretion of the Manufacturer but cannot be guaranteed. Whilst
our Engineers will endeavour to minimize inconvenience and to meet requests for specific
timed appointments, this cannot be guaranteed. We will not be liable for delays or if it Is
unable to carry out a repair because a convenient appointment cannot be arranged.
Will there be any charge for the repairs?
It Is your responsibility to provide evidence to the Engineer that your product is covered by
this guarantee with a proof of purchase. The Manufacturer reserves the right to charge for
the reasonable cost of any service call if:
e You cannot provide evidence that your product is covered by this guarantee.
e Where a service call has been made and the engineer finds that there is no fault
with your product.
e That your product has not been installed or operated in accordance with the User
Instructions Booklet.
e That the fault was caused by something other than faulty materials, defective com-
ponents or manufacturing defects.
e For missed appointments.
Payment of these costs are due immediately upon the Engineer providing you with an
invoice. The Manufacturer reserves the right to terminate the guarantee if you fail to pay the
costs for the service call in a timely manner.
If you are a resident of the United Kingdom, this guarantee will be governed by English law
and subject to the English Courts, save where you live in another part of the United Kingdom,
In which case the law and courts of that location will apply.
If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law
and the Irish courts will have jurisdiction.
This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford,
Hertfordshire. WD 18 8QU.
Beko plc is registered in England and Wales with company registration number 02415578.
30/EN
GRUNDIG UK AND IRELAND ECO INVERTER MOTOR GUARANTEE TERMS AND
CONDITIONS
This 10 year guarantee relates to Grundig products that feature the Eco Inverter Motor.
The Eco Inverter Motor guarantee terms and conditions are in addition to our Standard
guarantee terms and conditions detailed in the previous section.
In order to activate the 10 year guarantee you MUST register the appliance within 90 days of
the original purchase date. You can register by first visiting grundig.co.uk/register and by
following the online instructions.
Grundig Free standing and Built-in appliances come with a 36 month parts and labour
guarantee as standard, which can be extended to a 60 months parts and labour guarantee
by registering within 90 days of the original purchase date.
To make a claim against your Grundig Eco Inverter Motor Guarantee (the “Guarantee”], all
customer and product details must be registered with Beko plc using the procedure
outlined below.
1.
This extra 7 years (or b years for appliances registered within 90 days of the origi-
nal purchase date) Guarantee is only effective after the expiration of the standard
manufacturer s guarantee.
It Is only valid for the Eco Inverter motors of selected washing machines, washer-
dryers, tumble dryers and dishwashers. It does not cover any labour charge or any
other components of the product. In addition, it is only valid for one replacement of
the Eco Inverter motor during the extra 7 years (or 5 years for appliances regis-
tered within 90 days of the original purchase date) guarantee period.
To activate your guarantee, you MUST register your appliance within 90 days of the
original purchase date, by visiting Grundig.co.uk/register.
Customers will receive a unique reference code as proof of guarantee validation by
email or post, which must be quoted at the time of a claim being made.
Any repair/replacement of the Eco Inverter motor must only be carried out by an
authorised Grundig Service Agent (the “Service Agent”).
Labour for the repair/replacement of the Eco Inverter motor is not included in this
guarantee and is chargeable directly by the Service Agent.
Any additional components fitted to the product at any time will not be covered by
this guarantee and will be chargeable directly by the Service Agent.
The guarantee 1s not transferable and cannot be exchanged for cash.
There are no alternative or additional offers to this Guarantee.
. The guarantee Is exclusive of the manufacturer's standard guarantee
. The lerms and Conditions shown above are In addition to the standard terms and
conditions of your product guarantee. Please read and refer to such Terms and
Conditions when making any claim.
. We may use the information you provide for marketing purposes and to analyse
your purchasing preferences. We may keep your information for a reasonable pe-
riod for these purposes in accordance with the applicable Data Protection Laws
and General Data Protection Regulations (GDPR]. You can opt into this service dur-
Ing the registration process. Further details are available at
http://www.Grundig.co.uk/cookie-and-privacy.
. These Terms and Conditions are governed by the laws of England and Wales;
manufacturer: Beko plc, Beko House, 1 Greenhill Crescent, Watford WD 18 8QU.
Company Registration Number: 02415578.
32/EN
HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE
Please keep your purchase receipt or other proof of purchase details in a safe place; you
will need to have this documentation available should the product require attention under
guarantee.
Please take a few moments to complete the details below, as you will need this information
when you call us, or to use our online services. When you call us you may be required to
input your serial number into your telephone keypad. For help please visit
grundig.co.uk/support/model-finder
e The product model number is printed on the Operating Instruction Booklet / User
guide
e The product model and serial number is printed on the Rating Label affixed to the
appliance.
e The Retailer (Purchased from) and Date of purchase will be printed on your pur-
chase receipt or other proof of purchase paperwork
Recording of these details alone will not count as proof of purchase. A valid proof of
purchase Is required for requesting service under guarantee.
Model number | Serial number | Purchased from Date of purchase
For service under guarantee or for product advice please call our Contact centre
Before requesting service please check the troubleshooting guide in the Operating
Instructions booklet, as a charge may be levied where no fault is found, and even though
your product may still be under guarantee.
After arranging service the area around the product must be easily accessible to the
Engineer, without the need for cabinets or furniture to be removed or moved.
It 1s your responsibility to ensure our Engineers have a clean and safe environment to carry
out any repairs.
Please have your Model number and Serial number available when you call us, as you may
be required to input your serial number into your telephone keypad during your call.
UK Mainland & Northern Ireland:
0333 207 9920
Landline or mobile calls to 0333 numbers cost no more than calls to geographic numbers
01 or 02, and are charged at the basic rate. Calls from landlines and mobiles are included in
free call packages but please check with your telephone service provider for exact call
charges.
33/EN
Republic of Ireland:
01 691 0203
Service once the manufacturers guarantee has expired
If you have purchased an extended guarantee please refer to the instructions contained
within the extended guarantee agreement document, otherwise please call us using the
appropriate number above, where service can be obtained at a charge.
Should you experience any difficulty in obtaining service please call us on 0333 207 9920 or
016910203
Contact us though our website
Send us a secure message through our online contact us form. Please visit our website,
click Contact Us and choose a product support topic from the list of options. Complete the
required details and click send message.
Product registrations
For UK and Republic of Ireland product registrations please visit grundig.co.uk/register.
34/EN
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021