PROJECT NAME: LOCATION: ITEM NO: DIPPING CABINET QTY: ICE CREAM HIGH CAPACITY MODELS DCH Self-contained ice cream storage and dipping cabinet with mechanically cooled syrup rail. These units are offered in a variety of lengths and capacities to meet your needs. The single opening mechanically cooled raised syrup rail provides easy access and safe holding of syrups and toppings. One piece die-formed 16 gauge with flip-top cover(s) provide easy access to the ice cream storage compartment. All models come standard on adjustable legs. MODEL NO: AIA NO: SIS NO: CSI SECTION: 11400 SHORT FORM SPEC: Randell DCH series high capacity ice cream dipping cabinets with electronically controlled natural R290 refrigeration system. Conductive cooled storage compartment and syrup rail complete with syrup pumps and fruit jars with ladles. All units include stainless steel front panel along with covered corner stainless steel interior storage compartment . All unit shipped on factory installed adjustable height legs mounted to full length leg rails. Model DCHFT-57-SR8 shown with optional finished end, sink and dipperwell. AVAILABLE MODELS: DCHFT-45-SR6 DCHFT-57-SR8 STANDARD FEATURES: • Cold-wall conductive cooled base storage and syrup rail • Electronically controlled temperature • Syrup pumps and fruit jars included • Natural R290 refrigeration system • Stainless steel coved interior base storage compartment • Foamed in place “CFC free” urethane insulation REFRIGERATION SYSTEM: All models will utilize state of the art, energy efficient R290 compressor system with (0) ozone depletion potential (ODP) and (3) global warming potential (GWP). Units are conductively cooled by coldwall wrapped base storage compartment and syrup rail. Temperature is managed by electronic controller, metered using capillary tube system. Unit totally prewired and to be supplied with 8’ cordset (NEMA 5-15P) for 115V operation. CABINET EXTERIOR: Top to be one piece of die formed 16 gauge stainless steel with 2.5” nosing. Slide-Top models to have recessed removable poly lids. Flip-Top models to have die stamped cut-outs with raised rims, fitted with removable, hinged, insulated lids. Exterior body to be corrosion resistant steel. Front panels to be removable, constructed of 22 gauge die-stamped stainless steel. Louver panel to be die-stamped stainless steel. Work surface to be at 36” work height. Factory installed adjustable height legs mounted to full length channel frame assembly which is integrally welded to bottom of body assembly. Legs can be moved left to right to avoid floor obstacles. OPTIONS/ACCESSORIES: Cabinet: Casters Sink Dipperwell Compressor left Stainless steel end panel Stainless steel back panel Laminated panels Curb mounting CABINET INTERIOR: Unit interior to be stainless steel, with cover corners, interior sides to be wrapped with refrigeration lines mounted to unit body. Unit insulation to be CFC free foamed in place urethane. ORIGIN OF MANUFACTURE: Designed, tested and manufactured in the United States (MI, MS). ADDITIONAL INFORMATION: Price Book AutoQuotes / KCL Product Videos Selling Tools Dipping Cabinet SP SHT2013 RevA 05/20 DCH MODEL LENGTH DEPTH HEIGHT STORAGE CAPACITY COVER STYLE SYRUP RAIL PUMPS/ JARS HP VOLT/CYCLE/ PHASE AMPS NEMA PLUG SHIP WT. DCHFT-45-SR6 45 33 36 24 GAL. FLIP 3P/3J 0.33 115/60/1 3.2 5-15P 418 DCHFT-57-SR8 57 33 36 36 GAL. FLIP 4P/4J 0.33 115/60/1 3.2 5-15P 458 DIMENSIONAL DETAIL: Stainless Steel Finished End: Unfinished End: 888-994-7636, unifiedbrands.net © 2020 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project