INCA PRO PLUS INSERT RANGE HOOD A VERSATILE PROFESSIONAL LINER AND HOOD. This all in one Pro Range Hood Liner from Faber is for custom cabinets available in 4 widths and 2 depths for all your needs. With 5 blower options, the Inca Pro Plus insert vent hood offers the power, style and functionality you need for today’s custom pro hood applications. AVAILABLE MODELS Choose your Blower Choose your Hood model # INPL3019SSNB-B INPL3619SSNB-B INPL4219SSNB-B INPL4819SSNB-B size / color 30 x 19 stainless 36 x 19 stainless 42 x 19 stainless 48 x 19 stainless CFM* choose choose choose choose INPL3622SSNB-B 36 x 22 stainless choose INPL4822SSNB-B 48 x 22 stainless choose * choose a blower IB300 (Internal) IB400 (Internal) IB600 (Internal) IB1200 (Internal) RB900 (Remote) RB1200 (Remote) AXP250 (In-Line) CFM* 300 400 600 1200 900 1200 735 KEY FEATURES 5 Watt LED bulbs (New) Easy Snap Mounting Clips Pro Motor Baffle Grease Filters Low consumption 5 watt LED bulb to light up your cooking area but use very little energy. Approved for higher BTU cooking. Installation with easy with built-in adjustable clips that tighten onto the sides of the cabinet floor The motor in this hood is surrounded in metal with all metal impellers for top performance Dishwasher safe SS metal filters capture grease and allow for easy clean up in the dishwasher INCA PRO PLUS INSERT RANGE HOOD SPECIFICATIONS DIMENSIONS 19 11/16'' Deep Models (20 11/16'' deep with trim) cut out dimensions see chart below convertible to ductless / recirculating Yes – FILTER1/ FILTER1LL controls variable speed dial lighting 2 x 5 (w) LED- one level easy snap installation Yes ducting top 6" round OR 10" round grease filters dishwasher safe SS baffle AC Input 120 V - 60hz AC power (IB300, IB400, 2.7, 3.6, 6.2, 1.9, 2.6 A at 310, 420, 730, IB600, IB1200, RB900, RB1200) 220, 300 W pro motor w/ motor impellers Yes (IB600/IB1200) 22 11/16'' Deep Models (23 11/16'' deep with trim) PERFORMANCE (600 CFM) SPEED CFM Sones 1 335 2 450 3 560 2.5 4.0 7.0 ACCESSORIES # MUDAMPER6 / MUDAMPER8/ # FILTER1 – MUDAMPER10 – Charcoal Filter Kit Universal Make-Up Air Damper High quality charcoal filter for use Satisfies make-up air requirements, this kit uses an air switch to activate the make-up air damper to open and bring fresh air into the home when the hood fan is on. It then closes tightly when the hood is off. The CFM level is not reduced with this acessory. # INLBKIT – 10" In-line blower kit Use to connect a separately purchased in-line blower or previously installed remote blower to the range hood. Includes a duct plate with a 10" round duct collar and a built in wiring box. when recirculating the air back into the kitchen. Filters out odor and should be replaced every 6 months. # FILTER1LL – Long Lasting Charcoal Filter Kit Cut Out New washable charcoal filter can be recharged and washed up to 8 times. For use when recirculating the air back into the kitchen. Filters out odor and can last up to 4 years. # FLANGE10 10'' Plate for Remote Blower A 10'' plate for connecting the remote blower to 10'' round ducting. This is required for remote blowers. 10'' transition included with IB1200 Rev. 4/19 WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this range hood 2 Cabot Road Hudson, MA 01749 • TEL: (508) 358-5353 • E-Mail: [email protected] www.faberonline.com Imagined in Italy
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021