VIVO STAND-TV00Y TV Stand Assembly Instructions

Tabletop TV Stand

Instruction Manual

SKU: STAND-TV00Y

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.

https://vivo-us.com/products/stand-tv00y

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST [email protected]

www.vivo-us.com

Chat live with an agent!

309-278-5303

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

A1 (x1)

Base Plate

A2 (x1)

Junction Plate

A3 (x1)

TV Bracket

A4 (x1)

TV Bracket

B1 (x1)

Base Plate

2

B2 (x1)

Junction Plate

B3 (x1)

TV Bracket

E (x4)

M6 Nut

J (x4)

20mm M6/

M8 Spacer

O (x4)

M4x30

F (x1)

Allen Wrench

K (x4)

M4 Washer

P (x4)

M6x20

T (x4)

M8x45

U (x2)

Soft Pad

B4 (x1)

TV Bracket

G (x1)

Crescent

Wrench

L (x4)

M6 Washer

Q (x4)

M6x35

NOTE:

C (x8)

M6x10

D (x4)

M6 Cap Nut

H (x4)

M4 Spacer

M (x4)

M8 Washer

I (x4)

5mm M6/8

Spacer

N (x4)

M4x12

R (x4)

M8x20

S (x4)

M8x35

SOME HARDWARE INCLUDED MAY NOT BE USED

TOOLS NEEDED

Phillips

Screwdriver

ASSEMBLY STEPS

STEP 1

Apply pads (l) to bottom of base plates (A1,

B1) . Connect base plate (A1) to junction plate (A2) using M6x10 Bolts (C) as shown in diagram. Use Allen wrench (F) to tighten bolts. Repeat this process with base plate (B1) and junction plate (B2) .

A1 & B1

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

110lbs

(49.90kg)

STEP 2

Attach TV bracket (A4) to TV bracket (A3) using

M6 nut (E) and tighten using the crescent wrench (G) . Repeat process with TV brackets

(B3, B4) .

B4

G

E

A4

Soft Pad

F

C

B2

A2

B3

A3

B1

A1

STEP 3

Connect TV bracket (A3) to junction plate (A2) using bolt (C) , nut (D) , and Allen wrench (F) and crescent wrench (G) as shown in diagram.

Repeat process with TV bracket (B3) and junction plate .

STEP 4

With TV facing down on a clean, flat surface, mount legs to back of monitor using bolts

(N-T) and washers (K-M) depending on size of mounting holes in television. For curved monitors, spacers (H-J) may be required.

N to S

K to M

F

C

B3

D

G

A3

3

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

LAST UPDATED: 03/06/2020

Open

Monday - Friday 7:00am - 7:00pm

CST, our dedicated support team can offer immediate assistance with rapid response times.

If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. [email protected]

www.vivo-us.com

Chat live with an agent!

AVG. RESPONSE TIME (within office hrs) : 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

AVG. RESOLUTION TIME (within office hrs) : < 15 M

309-278-5303 AVG. RESOLUTION TIME (within office hrs) : 5M 4S

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com