Hyundai R160LC-7A Owner Manual
Hyundai R160LC-7A is an excavator renowned for its power, performance, and reliability. Equipped with a Mitsubishi D04FD-TAA engine, it meets EPA Tier 3 and EU Stage 3A emission regulations. Its advanced CAPO system optimizes engine and pump power for various workloads, maximizing performance and minimizing fuel consumption. The spacious and comfortable cabin offers excellent visibility, while the highly sensitive joysticks and easy-to-reach control panels enhance control and reduce operator fatigue.
Advertisement
Advertisement
R160LC-7A_new_en 18-10-2007 14:10 Pagina 1
NEW 7A SERIES
CRAWLER EXCAVATOR Applied Tier III Engine
I Photo may include optional equipment
R160LC-7A_new_en 18-10-2007 14:10 Pagina 2
Robex 160 LC-7A
R160LC-7A_new_en 18-10-2007 14:11 Pagina 3
Built for Maximum Power,
Performance and Reliability.
A new chapter in construction equipment has now begun.
Making the dream a reality.
HYUNDAI CONSTRUCTION EQUIPMENT 02 /
03
R160LC-7A_new_en 18-10-2007 14:11 Pagina 4
Robex 160 LC-7A
Operator’s Comfort is Our Main Concern.
Wide Cab Exceeds Industry Standards.
Technology in Cab Design
Visibility
. Even more visibility than before, for safer, more efficient operation.
Excellent Ventilation
. Ventilation has been improved by the addition of a larger fresh air intake system and by providing additional air flow throughout the cab.
. Sliding front and side windows provide improved ventilation.
. A large sunroof offers upward visibility and additional ventilation.
Comfortable Operator Environment
. The control levers and seat can be adjusted to provide maximum operator comfort.
. The seat is fully adjustable for optimum operating position, reducing operator fatigue.
. Console boxes slide forward and backward for improved accessibility.
. The proportional pressure controls reduce unnecessary exertion while ensuring precise operation.
. Large windows allow excellent visibility in all directions.
Low noise design
. The Robex 7A series is designed with low operation noise in mind.
. Hyundai engineering made efforts to keep interior and exterior noise levels to a minimum.
. The cab's noise levels have been additionally reduced by improving the door seals for the cab and engine compartments.
. An insulated diesel engine compartment with sound-damping material also reduces noise.
1
2 3
1
Wide, Comfortable Operating Space
2
Steel Cover Sunroof
3 Dial Type Engine Speed Switch and / Key Switch
Radio CD Control
R160LC-7A_new_en 18-10-2007 14:11 Pagina 5
HYUNDAI CONSTRUCTION EQUIPMENT 04 /
05
R160LC-7A_new_en 18-10-2007 14:11 Pagina 6
Robex 160 LC-7A
Improved Intelligent Display
Instrument Panel is installed in front of RH console box. It is easy to check all critical systems with easy-to-read indicators.
Minimization of Shock and Vibration through a Cab Mounting System
The application of the Viscous Mounting system to the cabin support provides the operator with a smoother ride. The operator work efficiency will increase as the shock and noise level in the cabin decreases.
Operating Environment
Storage box and Cup Holder
An additional storage box and cup holder are located behind operator’s seat so to keep food and beverages cool or hot.
Wide Cab with Excellent Visibility
The cab is roomy and ergonomically designed with low noise level and a good visibility. A full view front window and large rear and side windows provide excellent visibility in all directions.
Wide, Comfortable Operating Space
All the controls are designed and positioned according to the latest ergonomic research.
Reinforced pillars have also been added for greater cab rigidity.
Smooth Travel Pedal and Foot Rests
R160LC-7A_new_en 18-10-2007 14:11 Pagina 7
Maximum Protection
Highly Sensitive Joystick and Easy Entrance
New joystick grips for precise control have been equipped with
4 switches.
Left
• Power boost
• One touch deceleration
• Optional (2)
Right
• Horn
• Optional (3)
Easy-to-Reach Control
Panels
Switches and other essential controls are located near the operator. This helps to keep operator movements to a minimum, enhancing control with less operator’s fatigue.
The better working conditions in a pleasant environment
Rear Emergency Exit
Window
Rear Exit Window is designed to provide an easy exit in emergency cases.
Raise-up Wiper and Cabin
Lights
Raise-up wiper installed to enhance a better front view.
Cabin Lights enhance safety by brightly lighting the surroundings in dark environments. (optional)
�
쐅
쐈
쐉
씈
씉
�
�
�
�
�
�
�
�
Centralized control panel
Horn button
Option button
Remote Radio control
Travel lever
Cluster
One touch decel button
Hour meter
Travel pedal
Fully adjustable suspension seat
Safety lever
Power boost button
Joystick control lever
Air Conditioner and Heater controller
HYUNDAI CONSTRUCTION EQUIPMENT 06 /
07
R160LC-7A_new_en 18-10-2007 14:11 Pagina 8
Automatic Engine
Overheat Prevention
If the engine coolant temperature gets too high, the CPU controller lowers the engine speed and cools the engine.
Anti Restart System
The new system protects the starter from re-starting during engine operation, even if the operator accidentally turns the start key again.
Power boost control
System
When the power boost system is activated, digging power increases about 10%.
It is especially useful when extra power is temporarily needed, for instance, when digging hard earth and rock.
Automatic Warming-up
System
After the engine is started, if the engine coolant temperature is low, the CPU controller increases the engine speed and automatically increases the pump flow rate so to warm up the engine more effectively.
Advanced Hydraulic System
ADVANCED CAPO SYSTEM
NEW MODE CONTROL SYSTEM
2
3
1
11
2
POWER MODE
H mode: High power
S mode: Standard power
WORK MODE
: Heavy duty work
: General work
: Breaker
3
USER MODE
M mode: Maximum Power
U mode: Memorizing Operator’s Preferable Power Setting
The advanced CAPO (Computer
Aided Power Optimization) system maintains engine and mutual pump power at optimum levels. Mode selections are designed for various work loads, maintaining high performance while reducing fuel consumption. Features such as auto deceleration and power boost are included in the system. The system monitors engine speed, coolant temperature, and hydraulic oil temperature. Contained within the system are self diagnostic capabilities which are displayed by error codes on the cluster.
Auto Deceleration System
When remote-control valves are in neutral position more than
4 seconds, the CPU controller instructs the accelerator actuator to reduce engine speed to
1,000 rpm. This decreases fuel consumption and reduces cab noise levels.
Max. Flow Cut-off System
For precise control and finishing work, the Max.
Flow Cut-off System reduces pump flow, thus allowing smooth operation.
Self Diagnosis System
The CPU controller diagnoses problems in the
CAPO system caused by electric and hydraulic malfunctions and displays them on the LCD monitor of the cluster through error codes. This controller has the capacity to identify 48 distinct types of errors. The information from this device, such as engine rpm, main pump delivery pressure, battery voltage, hyd. temperature, and the state of all types of electric switches, provides the operator with an exact condition of the machine. This instrument makes it easier to troubleshoot the machine in case of failure.
One Touch Deceleration System
When the one touch deceleration switch is pressed, the CPU controller controls the accelerator actuator to reduce engine speed to
850 rpm. Once this switch is pressed again, the engine speed recovers to its preset RPM.
Pump Flow Control System
In neutral position: Pump flow is reduced to a minimum to eliminate power loss.
In operation: Maximum pump flow is delivered to the actuator to increase the speed. With movement of the control lever, pump flow is automatically adjusted and the actuator speed can be proportionally controlled.
Boom & Arm Holding System
The holding valves in the main control valve prevent the boom & arm from dropping over an extended period in neutral position.
Arm Flow Regeneration System
Arm flow regeneration valve provides smooth arm-in operation without cylinder cavitation.
Hydraulic Damper in Travel Pedal
Improved travel controllability & feeling during movement of the machine by use of shock reducing material.
R160LC-7A_new_en 18-10-2007 14:11 Pagina 9
Mitsubishi
D04FD-TAA
Engine
The 4 cylinders turbocharged and charged air cooled, engine is built for power, reliability and economy. This engine meets EPA tier 3 and
EUstage 3A emission regulation.
Reliability You Can Depend On
When you have a tough job to do you need the power precision and flexibility of Mitsubishi
D04FD-TAA engines. It features major enhancements to make every piece of equipment work harder, smarter, quieter and longer.
The high Pressure Common Rail Fuel System provides enhanced engine performance with higher torque and better throttle response at every rpm without compromising fuel economy.
The Mitsubishi D04FD-TAA engine is based on the highly successful Mitsubishi SK series engines.
These engines combine proven full authority electronic controls with reliable performance you expect from one of the most successful and durable engine design.
Increased Higher Performance
Reinforced Bucket and Bucket Linkage
To prevent excessive wear of pins and bushes, sealed joints have been applied. Bucket link design incorporates high durability and anti wear characteristics. Additional reinforcement plates on cutting edge section are welded. Thicker steel and an additional lateral plate are put in place to reinforce the bucket.
Strong and Stable Lower Frame
Reinforced box-section frame is all welded using low-stress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough ground or working on wet sites. The use of highly durable upper and lower rollers and track guards ensures proper machine transfer on all terrains. The long undercarriage incorporates heavy duty excavator style components. An X-leg type center frame is integrally welded for maximum strength and durability.
Powerful and Precise Swing Control
Improved shock absorbing characteristics make stopping swing movement a precise and smooth action.
Track Rail Guide & Adjusters
Durable track rail guides keep track links in place. Track adjustment is made easy by using standard grease operated cylinder track adjusters including shock absorbing springs. (Full Track Guide: Option)
HYUNDAI CONSTRUCTION EQUIPMENT 08 /
09
R160LC-7A_new_en 18-10-2007 14:11 Pagina 10
Robex 160 LC-7A
Full open doors and the use of one master key system provide easy access during servicing.
Reliability & Serviceability
Side Cover with Left & Right Swing Open Type
Easy access to vital components gives unrestricted view of components allowing easy maintenance and repair.
Easy to maintain engine components
A cooling and preheating system are provided for optimum and immediate operation, guaranteeing longer life for the engine and hydraulic components. Servicing of the engine and hydraulics is considerably simplified due to total accessibility.
Centralized Electric Control
Box and Easy Change Air
Cleaner Assembly
Electric control box and air cleaner are centralized in one and the same compartment for easy service.
Highly efficient Hydraulic Pump
Pump output capacity has been increased.
Large tool box for extra storage
R160LC-7A_new_en 18-10-2007 14:11 Pagina 11
Durability of structure proven through
FEM (Finite Element Method) analysis and long term durability test.
HYUNDAI CONSTRUCTION EQUIPMENT 10 /
11
R160LC-7A_new_en 18-10-2007 14:11 Pagina 12
S
pecifications
Engine
Model
Type
Rated flywheel horse power
SAE
J1995 (gross)
J1349 (net)
6271/1 (gross)
DIN
6271/1 (net)
Max. torque
Bore x stroke
Piston
Batteries
Starting motor
Alternator
Mitsubishi D04FD-TAA
Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged, charged air cooled and low emission
126 HP (94 kW) at 2,000 rpm
116 HP (87 kW) at 2,000 rpm
128 PS (94 kW) at 2,000 rpm
118 PS (87 kW) at 2,000 rpm
477 Nm (345 lbf.ft) at 1,800 rpm
102 x 130 mm (4.5” x 5.3”)
4,249 cc (259.3 in 3 )
2 x 12 V x 100 AH
24 V - 5.0 kW
24 V - 50 Amp
Hydraulic system
Main pump
Type Two variable displacement piston pumps
Max. flow
Sub-pump for pilot circuit
2x160 l /min (44.4 US gpm / 37.0 UK gpm)
Gear pump
Cross-sensing and fuel saving pump system
Hydraulic motors
Travel
Two speed axial piston motor with brake valve and parking brake
Swing
Relief valve setting
Implement circuits
Travel
Power boost (boom, arm, bucket)
Swing circuit
Pilot circuit
Service valve
Hydraulic cylinders
No. of cylinder - bore x rod x stroke
Axial piston motor with automatic brake
32,4 MPa (4690 psi)
32,4 MPa (4690 psi)
35,3 MPa (5120 psi)
23,5 MPa (3410 psi)
3,4 MPa (500 psi)
Installed
Boom: 2-115 x 80 x 1090 mm (4.5” x 3.1” x 42.9”)
Arm: 1-120 x 85 x 1340 mm (4.7” x 3.3” x 52.8”)
Bucket: 1-115 x 80 x 950 mm (4.5” x 3.1” x 37.4”)
Blade: 2-110 x 75 x 320 mm (4.3” x 3.0” x 12.6”)
2PCS 1st: 2-115 x 80 x 960 mm (4.5” x 3.1” x 37.8”)
2nd: 1-160 x 95 x 650 mm (6.3” x 3.7” x 25.6”)
Drives & Brakes
Drive method
Drive motor
Reduction system
Max. drawbar pull
Max. travel speed (high) / (low)
Gradeability
Parking brake
Fully hydrostatic type
Axial piston motor, in-shoe design
Planetary reduction gear
157 kN (34,600 lbf)
5.3 km/hr (3.3 mph) / 3.4 km/hr (2.1 mph)
30° (58 %)
Wet multi disc
Control
Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation.
Pilot control
Two joysticks with one safety lever (LH):
Swing and arm, (RH): Boom and bucket (ISO)
Traveling and steering
Engine throttle
External Lights
Two levers with pedals
Electric, Dial type
Two lights mounted on the boom one under the battery box
Swing System
Swing motor
Swing reduction
Swing circuit lubrication
Swing brake
Swing speed
Axial piston motor
Planetary gear reduction
Grease-bathed
Multi wet disc
11.3 rpm
Coolant & Lubricant Capacity
(refilling)
Fuel tank
Engine coolant
Engine oil
Swing device
Final drive (each)
Hydraulic system
Hydraulic tank liter
260
28
18.5
5
3
240
160
US gal
68.7
7.4
4.9
1.3
0.8
63.4
42.3
UK gal
57.2
6.2
4.1
1.1
0.7
52.8
35.2
Undercarriage
X-leg type center frame is integrally welded with reinforced box-section track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing spring sprockets and track chain with triple grouser shoes.
Centre frame
Track frame
No. of shoes on each side
No. of carrier roller on each side
No. of track roller on each side
No. of track (rail) guard on each side
7
1
X - leg type
Pentagonal box type
49
2
Operating Weight (approximate)
Operating weight, including 5,100 mm (16'9") mono boom; 2,600 mm (8'6") arm, heaped 0.70 m 3 (0.92 yd 3 ) backhoe bucket, lubricant, coolant, full fuel tank, hydraulic tank and the standard equipment.
Major component weight
Upperstructure
Counterweight
5.1 m (16’ 9”) Mono boom (with arm cylinder)
Hydraulic adjustable boom (with arm cylinder)
4,530 kg (9,900 lb)
2,950 kg (6,500 lb)
1,250 kg (2,760 lb)
1,780 kg (3,920 lb)
Operating weight
Shoes (Triple grouser)
500 (20”) mm (in)
R160L C -7A
R160L C D-7A
R160LC-7A
600 (24”)
R160L C D-7A
R160L C -7A
700 (28”)
R160L C D-7A
Standard equipment
Operating weight kg (lb)
17,150 (37,810)
18,150 (40,010)
17,400 ( 3 8, 3 60)
18,400 (40,570)
17,650 (38,910)
18,650 (41,120)
Ground pressure
MPa (psi)
0,049 (7.11)
0,052 (7.54)
0,041 (5.97)
0,044 (6.40)
0,036 (5.26)
0,038 (5.55)
R160LC-7A_new_en 18-10-2007 14:11 Pagina 13
B
ackhoe attachment
Buckets
SAE heaped m 3 (yd 3 )
0.39 (0.51)
Capacity m 3 (yd 3 )
SAE heaped
0.39 (0.51)
0.50 (0.65)
0.64 (0.84)
0.70 (0.92)
0.89 (1.16)
0.69 (0.90)
: Standard backhoe bucket
: Heavy-duty
CECE heaped
0.34 (0.44)
0.44 (0.58)
0.55 (0.72)
0.60 (0.78)
0.77 (1.01)
0.62 (0.81)
0.50 (0.65)
Without side cutters
620 (24.4)
760 (29.9)
920 (36.2)
990 ( 3 9)
1,220 (48.0)
990 (39.0)
Width mm (in)
With side cutters
740 (29.1)
880 (34.6)
1,040 (40.9)
1,110 (4 3 .7)
1,340 (52.8)
-
0.64 (0.84) 0.70 (0.92) 0.89 (1.16) 0.69 (0.90)
Weight kg (lb)
Boom
Arm
2.2 m
(7’ 3”)
Recommendation mm (ft.in)
5.1 m (16’ 9”)
Mono boom
2.6 m
(8’ 6”)
3.1 m
(10’ 2”)
5.1 m (16’ 9”)
Hydraulic Adjustable boom
2.2 m
(7’ 3”)
2.6 m
(8’ 6”)
410 (900)
470 (1,040)
510 (1,120)
540 (1,190)
610 (1,340)
700 (1,540)
: Applicable for materials with density of 2,000 kg/m 3
: Applicable for materials with density of 1,600 kg/m 3
(3,370 lb/yd 3 ) or less
(2,700 lb/yd 3 ) or less
: Applicable for materials with density of 1,100 kg/m 3 (1,850 lb/yd 3 ) or less
Backhoe attachment
Boom and arms are of all-welded, low-stress, full-box section design. 5.1 m (16'9") mono boom; 5.1 m (16'9") hydraulic adjustable boom and 2.20 m ( 7'3"),; 2.60 m (8'6");
3.10 m (10'2") arms are available. Buckets are all-welded, high-strength steel implements.
2.20 m (7’ 3”)
Digging force
Length m (ft.in) kg (lb) kN kgf lbf
2.20 (7’3”)
Arm
Bucket digging force
Arm crowd force
Weight
I
I
S
S
AE
S
AE
S
O
O kN kgf lbf kN kgf lbf kN kgf lbf
Note: Arm weight including bucket cylinder and linkage.
750 (1,650)
108.6 [118.4]
11,070 [12,080]
24,410 [26,630]
124.5 [135.9]
12,700 [13,850]
28,000 [30,550]
85.2 [93.0]
8,690 [9,480]
19,160 [20,900]
89.0 [97.1]
9,080 [9,910]
20,020 [21,840]
2.60 m (8’ 6”)
2.60 (8’ 6”)
810 (1,790)
108.6 [118.4]
11,070 [12,080]
24,410[26,6 3 0]
124.5 [1 3 5.9]
12,700 [1 3 ,850]
28,000 [ 3 0,550]
75.0 [81.8]
7,650 [8, 3 50]
16,870 [18,400]
77.6 [84.6]
7,910 [8,6 3 0]
17,440 [19,0 3 0]
Standard arm
3.10 m (10’ 2”)
3.10 (10’ 2”)
890 (1,960)
108.6 [118.4]
11,070 [12,080]
24,410 [26,630]
124.5 [135.9]
12,700 [13,850]
28,000 [30,550]
67.4 [73.5]
6,870 [7,490]
15,150 [16,530]
69.4 [75.7]
7,080 [7,720]
15,610 [17,030]
Remark
[ ]:
Power Boost
HYUNDAI CONSTRUCTION EQUIPMENT 12 /
13
R160LC-7A_new_en 18-10-2007 14:11 Pagina 14
D
imensions & Working ranges
Dimensions
R160LC-7A
D,D' E
A Tumbler distance
E
F
G
B
C
D
D’
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upper structure
Overall height of cab
Min. ground clearance
H Track gauge
Working ranges
R160LC-7A
A
A'
F
I mm (ft . in)
3,190 (10 ’6”)
3,980 (13’ 1”)
1,035 (3’ 5”)
2,530 (8’ 4”)
2,480 (8’ 2”)
2,475 (8’ 1”)
2,915 (9’ 7”)
460 (1’ 6”)
1,990 (6’ 6”)
A
B
Boom length
Arm length
I
J
Overall length
Overall height of boom
K Track shoe width
L Overall width
Standard Equipment
K
2,200
(7’ 3”)
8,620
(28’ 3”)
2,960
(9’ 9”)
500
(20”)
2,490
(8’ 2”)
H
L mm (ft . in)
5,100(16’ 9”)
2,600
(8’ 6”)
8,600
(28’ 3 ”)
2,910
(9’ 7”)
600
(24”)
2,590
(8’ 6”)
3,100
(10’ 2”)
8,600
(28’ 3”)
3,090
(10’ 2”)
700
(28”)
2,690
(8’ 10”)
Boom length
Arm length
A Max. digging reach
A ’
Max. digging reach on ground
B Max. digging depth
B ’
Max. digging depth
(8' level)
C
D
E
Max. vertical wall digging depth
Max. digging height
Max. dumping height
F Min. swing radius
Standard Equipment
2,200
(7’ 3”)
8,690
(28’ 6”)
8,530
(27’ 12”)
5,660
(18’ 7”)
5,440
(17’ 10”)
5,140
(16’ 10”)
8,740
(28’ 8”)
6,100
(20’ 0”)
3,180
(10’ 5”) mm (ft . in)
5100 (16’ 9”)
2,600
(8’ 6”)
9,0 3 0
(29’ 8”)
8,870
(29’ 1”)
6,060
(19’ 11”)
5,860
(19’ 3 ”)
5,440
(17’ 10”)
8,870
(29’ 1”)
6,240
(20’ 6”)
3 ,170
(10’ 5”)
3,100
(10’ 2”)
9,450
(31’ 0”)
9,300
(30’ 6”)
6,560
(21’ 6”)
6,370
(20’ 11”)
5,730
(18’ 10”)
8,970
(29’ 5”)
6,380
(20’ 11”)
3,180
(10’ 5”)
R160LC-7A_new_en 18-10-2007 14:11 Pagina 15
Dimensions
R160LC-7A, 2-Piece Boom
D,D' E
A Tumbler distance
E
F
G
B
C
D
D’
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upper structure
Overall height of cab
Min. ground clearance
H Track gauge
Working ranges
R160LC-7A, 2-Piece Boom feet
30
25
20
15
10
5
0
5
10
15
20
A
A' meter
10
9
6
5
4
8
7
1
0
1
2
3
2
3
4
5
6
F
9 8 7 6 5 4 3 2 1 0 meter
30 25 20 15 10 5 0 feet
A
B
I mm (ft . in)
3,190 (10 ’6”)
3,980 (13’ 1”)
1,035 (3’ 5”)
2,530 (8’ 4”)
2,480 (8’ 2”)
2,475 (8’ 1”)
2,915 (9’ 7”)
1,990 (6’ 6”)
Boom length
Arm length
I
J
Overall length
Overall height of boom
K Track shoe width
L Overall width
Standard Equipment
K
H
L
500
(20”)
2,490
(8’ 2”)
2,200
(7’ 3 ”)
8,580
(28’ 2”)
3 ,040
(9’ 12”)
5,100(16’ 9”)
2,600
(8’ 6”)
8,570
(28’ 1”)
3,050
(10’ 0”) mm (ft . in)
600
(24”)
2,590
(8’ 6”)
700
(28”)
2,690
(8’ 10”)
Boom length
Arm length
A Max. digging reach
A ’
Max. digging reach on ground
B Max. digging depth
B ’
Max. digging depth
(8' level)
C
D
E
Max. vertical wall digging depth
Max. digging height
Max. dumping height
F Min. swing radius
Standard Equipment
2,200
(7’ 3”)
8,750
(28’ 8”)
8,600
(28’ 3”)
5,460
(17’ 11”)
5,350
(17’ 7”)
4,670
(15’ 4”)
9,390
(30’ 10”)
6,680
(21’ 11”)
3,130
(10’ 3”)
5,100 (16’ 9”)
2,600
(8’ 6”)
9,110
(29’ 11”) mm (ft . in)
8,960
(29’ 5”)
5,830
(19’ 2”)
5,750
(18’ 10”)
5,030
(16’ 6”)
9,600
(31’ 6”)
6,900
(22’ 8”)
2,970
(9’ 9”)
HYUNDAI CONSTRUCTION EQUIPMENT 14 /
15
R160LC-7A_new_en 18-10-2007 14:11 Pagina 16
D
imensions & Working ranges
Dimensions
R160LCD-7A
D,D' E
A
B
N
O
F
G
H
M
C
D
D’
E
Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
Ground clearance of blade up
Depth of blade down
Height of blade
Length of blade
Working ranges
R160LCD-7A
A
A'
F
I mm (ft . in)
3,190 (10 ’6”)
3,980 (13’ 1”)
1,035 (3’ 5”)
2,530 (8’ 4”)
2,480 (8’ 2”)
2,475 (8’ 1”)
2,915 (9’ 7”)
1,990 (6’ 6”)
780 (2’ 7”)
520 (1’ 8”)
645 (2’ 1”)
2,590 (8’ 6”)
B
A
O
M
C
N
Boom length
Arm length
I
J
Overall length
Overall height of boom
K Track shoe width
L Overall width
Standard Equipment
K
2,200
(7’ 3”)
9,010
(29’ 7”)
2,960
(9’ 9”)
500
(20”)
2,490
(8’ 2”)
H
L mm (ft . in)
5,100(16’ 9”)
2,600
(8’ 6”)
8,990
(29’ 6”)
2,910
(9’ 7”)
600
(24”)
2,590
(8’ 6”)
3,100
(10’ 2”)
8,990
(29’ 6”)
3,090
(10’ 2”)
700
(28”)
2,690
(8’ 10”)
Boom length
Arm length
A Max. digging reach
A ’
Max. digging reach on ground
B Max. digging depth
B ’
Max. digging depth
(8' level)
C
D
E
Max. vertical wall digging depth
Max. digging height
Max. dumping height
F Min. swing radius
Standard Equipment
2,200
(7’ 3”)
8,690
(28’ 6”)
8,530
(27’ 12”)
5,660
(18’ 7”)
5,440
(17’ 10”)
5,140
(16’ 10”)
8,740
(28’ 8”)
6,100
(20’ 0”)
3,180
(10’ 5”)
5,100 (16’ 9”)
2,600
(8’ 6”)
9,0 3 0
(29’ 8”)
8,870
(29’ 1”)
6,060
(19’ 11”)
5,860
(19’ 3 ”)
5,440
(17’ 10”)
8,870
(29’ 1”)
6,240
(20’ 6”)
3 ,170
(10’ 5”) mm (ft . in)
3,100
(10’ 2”)
9,450
(31’ 0”)
9,300
(30’ 6”)
6,560
(21’ 6”)
6,370
(20’ 11”)
5,730
(18’ 10”)
8,970
(29’ 5”)
6,380
(20’ 11”)
3,180
(10’ 5”)
R160LC-7A_new_en 18-10-2007 14:11 Pagina 17
Dimensions
R160LCD-7A, 2-Piece Boom
D,D' E
A
B
I
A
B
N
O
F
G
H
M
C
D
D’
E
Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
Ground clearance of blade up
Depth of blade down
Height of blade
Length of blade
Working ranges
R160LCD-7A, 2-Piece Boom feet
30
25
20
15
10
5
0
5
10
15
20
A
A'
0
1
2
3
4
5
6
2
1
4
3 meter
10
9
6
5
8
7
F
30
9 8 7 6 5 4 3 2 1 0 meter
25 20 15 10 5 0 feet mm (ft . in)
3,190 (10 ’6”)
3,980 (13’ 1”)
1,035 (3’ 5”)
2,530 (8’ 4”)
2,480 (8’ 2”)
2,475 (8’ 1”)
2,915 (9’ 7”)
1,990 (6’ 6”)
780 (2’ 7”)
520 (1’ 8”)
645 (2’ 1”)
2,590 (8’ 6”)
M
C
O
N
Boom length
Arm length
I
J
Overall length
Overall height of boom
K Track shoe width
L Overall width
Standard Equipment
K
H
L
500
(20”)
2,490
(8’ 2”)
2,200
(7’ 3 ”)
8,970
(29’ 5”)
3 ,040
(9’ 12”)
5,100(16’ 9”)
2,600
(8’ 6”)
8,960
(29’ 5”)
3,050
(10’ 0”) mm (ft . in)
600
(24”)
2,590
(8’ 6”)
700
(28”)
2,690
(8’ 10”)
Boom length
Arm length
A Max. digging reach
A ’
Max. digging reach on ground
B Max. digging depth
B ’
Max. digging depth
(8' level)
C
D
E
Max. vertical wall digging depth
Max. digging height
Max. dumping height
F Min. swing radius
Standard Equipment
2,200
(7’ 3”)
8,750
(28’ 8”)
8,600
(28’ 3”)
5,460
(17’ 11”)
5,350
(17’ 7”)
4,670
(15’ 4”)
9,390
(30’ 10”)
6,680
(21’ 11”)
3,130
(10’ 3”) mm (ft . in)
5,100 (16’ 9”)
2,600
(8’ 6”)
9,110
(29’ 11”)
8,960
(29’ 5”)
5,830
(19’ 2”)
5,750
(18’ 10”)
5,030
(16’ 6”)
9,600
(31’ 6”)
6,900
(22’ 8”)
2,970
(9’ 9”)
HYUNDAI CONSTRUCTION EQUIPMENT 16 /
17
R160LC-7A_new_en 18-10-2007 14:11 Pagina 18
L
ifting Capacities
Lifting capacities
R160LC-7A Rating over-front Rating over-side or 360 degree
• B oo m :: 5.10m (16’ 9”) • A • B ett :: 0.70 m 3 SAE heaped • S ho e :: 600 mm (24”) triple grouser with 2.95 ton (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*5850
*12900
*5850
*12900
*5860
*12920
*9740
*21470
*8500
*18740
*5860
*12920
7460
16450
7650
16870
*5440
*11990
*6500
*14 33 0
*7040
*15520
*6890
*15190
*5940
*1 3 100
4570
10080
4190
9240
3960
87 3 0
3900
8600
3980
8770
*3860
*8510
*4280
*9440
4660
10270
4520
9960
4480
9880
3020
6660
2880
6 3 50
2710
5970
2590
5710
2540
5600
*3240
*7140
1860
4100 6020
2860
6 3 10
3270
7210
*2930
*6460
*3390
*7470
3080
6790
2800
6170
2730
3 440
1630
3 590
1890
4170
2530
5580
2230
4920
1810
3 990
1610
3 550
1560
Reach m
(ft)
(27.6)
8.13
(26.7)
7.50
(24.6)
6.37
(20.9)
7.24
(2 3 .8)
7.99
(26.2)
8.36
(27.4)
8.41
• B oo m :: 5.10m (16’ 9”) • A • B ett :: 0.70 m 3 SAE heaped • S ho e :: 600 mm (24”) triple grouser with 2.95 ton (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*5680
*12520
*8890
*19600
*5680
*12520
*8890
*19600
*6640
*14640
*6650
*14660
*9340
*20590
*9150
*20170
*6330
*1 3 960
*6640
*14640
*6650
*14660
7340
16180
7480
16490
*6330
*1 3 960
*6170
*1 3 600
*6880
*15170
*6930
*15280
*6240
*1 3 760
*4220
*9 3 00
4220
9 3 00
3940
8690
3840
8470
3880
8550
4080
8990
*4020
*8860
*4550
*100 3 0
4510
9940
4440
9790
*4340
*9570
2890
6 3 70
2700
5950
2550
5620
2480
5470
2520
5560
*2940
*6480
3250
7170
3180
7010
1920
42 3 0
1840
4060
1780
3 920
*3120
*6880
2850
6280
2600
57 3 0
2540
5600
2650
5840
2980
6570
*2970
*6550
2010
44 3 0
1640
3 620
1470
3 240
1420
3 1 3 0
1480
3 260
1680
3 700
2180
4810
Reach m
(ft)
7.66
(25.1)
8.37
(27.5)
8.72
(28.6)
8.77
(28.8)
8.50
(27.9)
7.90
(25.9)
6.86
(22.5)
• B oo m :: 5.10m (16’ 9”) • A • B ett :: 0.70 m 3 SAE heaped • S ho e :: 600 mm (24”) triple grouser with 2.95 ton (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
NOTES
7.0 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*5960
*1 3 140
*8420
*18560
*11640
*25660
*5960
*1 3 140
*8420
*18560
*11640
*25660
*9510
*20970
*8210
*18100
*9730
*21450
*10150
*22 3 80
*8040
*177 3 0
8060
17770
7460
16450
7320
16140
7380
16270
7600
16760
1. Lifting capacity is based on SAE J1097, ISO 10567.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
*4380
*9660
*5730
*126 3 0
*6710
*14790
6940
15 3 00
*6700
*14770
*5380
*11860
*4380
*9660
4300
9480
3990
8800
3830
8440
3820
8420
3930
8660
*9460
4460
98 3 0
4350
9590
4340
9570
*2640
*5820
*3110
*6860
*3640
*8020
*4290
6000
2560
5640
2470
5450
2450
5400
*2640
*5820
3080
6790
2920
6440
2720
*1940
*4280
*2840
*6260
3200
7050
3120
6880
*2970
*6550
*1940
*4280
1940
4280
1850
4080
1770
3 900
1730
3 810
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
2340
5160
2420
5 3 40
2680
5910
*3290
*7250
*2730
*6020
*2760
*6080
2630
5800
2410
5 3 10
1310
2890
1350
2980
1510
333 0
1900
4190
2520
5560
1850
4080
1530
33 70
1370
3 020
Reach m
(ft)
9.10
(29.9)
8.85
(29.0)
8.28
(27.2)
7.30
(24.0)
6.92
(22.7)
8.05
(26.4)
8.73
(28.6)
9.06
(29.7)
R160LC-7A_new_en 18-10-2007 14:11 Pagina 19
Lifting capacities
R160LC-7A, 2-Piece Boom
• B oo m :: 5.10m (16’ 9”) • A • B ett :: 0.70 m 3 SAE heaped • S
Load radius
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft) 4.5 m(15.0 ft)
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg kg lb kg lb lb kg lb kg lb
*6610
*14570
*10560
*2 3 280
*6610
*14570
*10560
*2 3 280
*8470
*18670
*6700
*14770
*10490
*2 3 1 3 0
*8970
*19780
*5840
*12870
*8470
*18670
*6700
*14770
7530
*16600
7680
169 3 0
*5840
*12870
*4260
*9 3 90
*5390
*11880
*6540
*14420
7130
15720
7060
15560
*6210
*1 3 690
*4260
*9 3 90
4580
10100
4220
9 3 00
4010
8840
3950
8710
4010
8840
Rating over-front Rating over-side or 360 degree
*3820
*8420
*4280
*9440
4640
102 3 0
4510
9940
4460
98 3 0
6.0 m(20.0 ft)
3030
6680
2890
6 3 70
2740
6040
2620
5780
2570
5670
*3400
*7500
*3340
*7 3 60
3120
6880
2830
6240
2760
6080
2890
6 3 70
3300
7280
*3380
*7450
At max. reach
Capacity
3 660
1600
3 5 3 0
1680
3 700
1930
4250
2570
5670
3380
7450
2300
5070
1860
4100
1660
Reach m
(ft)
(27.2)
8.34
(27.4)
8.06
(26.4)
7.42
(24.
3 )
6.28
(20.6)
5.81
(19.1)
7.16
(2 3 .5)
7.92
(26.0)
8.30
• B oo m :: 5.10m (16’ 9”) • A • B ett :: 0.70 m 3 SAE heaped • S ho e :: 600 mm (24”) triple grouser with 2.95 ton (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
NOTES
7.0 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*6300
*1 3 890
*9330
*20570
*6300
*1 3 890
*9330
*20570
*7360
*162 3 0
*7670
*16910
*7420
*16 3 60
*10000
*22050
*9580
*21120
*6950
*15 3 20
*7360
*162
*16
16
3
3
3 0
*7670
*16910
*7420
60
7410
40
7530
16600
6950
15 3 20
1. Lifting capacity is based on SAE J1097, ISO 10567.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
*4940
*10890
*6190
*1 3 650
*6980
*15 3 90
6990
15410
*6480
*14290
*4610
*10160
4630
10210
4250
9 3 70
3990
8800
3890
8580
3910
8620
4090
9020
*2760
*6080
*3500
*7720
*4000
*8820
*4570
*10080
4480
9880
4400
9700
4430
9770
*2760
*6080
3050
6720
2900
6 3 90
2720
6000
2590
5710
2520
5560
2540
5600
*2560
*5640
3220
7100
3150
6940
1940
4280
1870
4120
1810
3 990
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
*3080
*6790
*3070
*6770
2880
6 3 50
2630
5800
2560
5640
2660
5860
3000
6610
*3370
*74 3 0
1470
3 240
1520
33 50
1730
3 810
2230
4920
2940
6480
2090
4610
1710
3 770
1520
33 50
Reach m
(ft)
8.68
(28.5)
8.42
(27.6)
7.81
(25.6)
6.75
(22.1)
6.33
(20.8)
7.56
(24.8)
8.28
(27.2)
8.64
(28.
3 )
HYUNDAI CONSTRUCTION EQUIPMENT 18 /
19
R160LC-7A_new_en 18-10-2007 14:11 Pagina 20
L
ifting Capacities
Lifting capacities
R160LCD-7A Rating over-front Rating over-side or 360 degree
• B oo m :: 5.10m (16’ 9”) • A • B ett :: 0.70 m 3 SAE heaped • S ho e :: 600 mm (24”) triple grouser with 2.95 ton (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft)
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg kg lb kg lb lb kg lb kg lb kg lb kg lb
*6610
*14570
*10560
*2 3 280
*6610
*14570
*10560
*2 3 280
*8470
*18670
*6700
*14770
*10490
*2 3 1 3 0
*8970
*19780
*5840
*12870
*8470
*18670
*6700
*14770
7950
175 3 0
8100
17860
*5840
*12870
*4260
*9 3 90
*5390
*11880
*6540
*14420
*7150
*15760
*7070
*15590
*6210
*1 3 690
*4260
*9 3 90
4820
106 3 0
4460
98 3 0
4250
9 3 70
4190
9240
4240
9 3 50
*3820
*8420
*4280
*9440
*4800
*10580
5010
11050
4960
109 3 0
3190
70 3 0
3060
6750
2900
6 3 90
2780
61 3 0
2740
6040
6970
3090
6810
3230
7120
*3610
*7960
*3380
*7450
*3400
*7500
*3340
*7 3 60
*3370
*74 3 0
3160
3 900
1720
3 790
1790
3 950
2060
4540
2730
6020
*3400
*7500
2440
5 3 80
1980
4 3 70
1770
Reach m
(ft)
5.81
(19.1)
7.16
(2 3 .5)
7.92
(26.0)
8.30
(27.2)
8.34
(27.4)
8.06
(26.4)
7.42
(24.
3 )
6.28
(20.6)
• B oo m :: 5.10m (16’ 9”) • A • B ett :: 0.70 m 3 SAE heaped • S ho e :: 600 mm (24”) triple grouser with 2.95 ton (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*6300
*1 3 890
*9330
*20570
*6300
*1 3 890
*9330
*20570
*7360
*162 3 0
*7670
*16910
*7420
*16 3 60
*10000
*22050
*9580
*21120
*6950
*15 3 20
*7360
*162 3 0
*7670
*16910
*7420
*16 3 60
7840
17280
7950
175 3 0
*6950
*15 3 20
*4940
*10890
*6190
*1 3 650
*6980
*15 3 90
*7090
*156 3 0
*6480
*14290
*4610
*10160
4870
10740
4480
9880
4220
9 3 00
4120
9080
4150
9150
4320
9520
*2760
*6080
*3500
*7720
*4000
*8820
*4570
*10080
4980
10980
4900
10800
*4530
*9990
*2760
*6080
3210
7080
3060
6750
2890
6 3 70
2750
6060
2680
5910
2710
5970
*2560
*5640
*3340
*7 3 60
*3170
*6990
2070
4560
1990
4 3 90
1930
4250
6480
2870
6 33 0
2980
6570
3350
7 3 90
*3370
*74 3 0
*3080
*6790
*3070
*6770
*3120
*6880
2940
3 590
1570
3 460
1630
3 590
1850
4080
2380
5250
*3080
*6790
2210
4870
1820
4010
1630
Reach m
(ft)
6.33
(20.8)
7.56
(24.8)
8.28
(27.2)
8.64
(28.
3 )
8.68
(28.5)
8.42
(27.6)
7.81
(25.6)
6.75
(22.1)
• B oo m :: 5.10m (16’ 9”) • A • B ett :: 0.70 m 3 SAE heaped • S ho e :: 600 mm (24”) triple grouser with 2.95 ton (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
NOTES
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*5960
*1 3 140
*8420
*18560
*11640
*25660
*5960
*1 3 140
*8420
*18560
*11640
*25660
*9510
*20970
*8210
*18100
*9730
*21450
*10150
*22 3 80
*8040
*177 3 0
8480
18700
7890
17 3 90
7740
17060
7800
17200
8020
17680
1. Lifting capacity is based on SAE J1097, ISO 10567.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
*4380
*9660
*5730
*126 3 0
*6710
*14790
*7050
*15540
*6700
*14770
*5380
*11860
*4380
*9660
4530
9990
4220
9 3 00
4070
8970
4050
89 3 0
4170
9190
*2640
*5820
*3110
*6860
*3640
*8020
*4290
*9460
*4810
*10600
4850
10690
*4750
*10470
*2640
*5820
*3110
*6860
3080
6790
2890
6 3 70
2730
6020
2630
5800
2620
5780
*1940
*4280
*2840
*6260
*3560
*7850
3490
7690
*2970
*6550
*1940
*4280
2070
4560
1980
4 3 70
1900
4190
1850
4080
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
2630
5800
2720
6000
3010
6640
*3290
*7250
*2730
*6020
*2760
*6080
*2830
*6240
2700
5950
1410
3 110
1460
3 220
1630
3 590
2030
4480
2650
5840
1970
4 3 40
1630
3 590
1470
3 240
Reach m
(ft)
9.10
(29.9)
8.85
(29.0)
8.28
(27.2)
7.30
(24.0)
6.92
(22.7)
8.05
(26.4)
8.73
(28.6)
9.06
(29.7)
R160LC-7A_new_en 18-10-2007 14:11 Pagina 21
Lifting capacities
R160LCD-7A, 2-Piece Boom Rating over-front Rating over-side or 360 degree
• B oo m :: 5.10m (16’ 9”) • A • B ett :: 0.70 m 3 SAE heaped • S ho e :: 600 mm (24”) triple grouser with 2.95 ton (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*5850
*12900
*5850
*12900
*5860
*12920
*9740
*21470
*8500
*18740
*5860
*12920
7880
17 3 70
8070
17790
*5440
*11990
*6500
*14 33 0
*7040
*15520
*6890
*15190
*5940
*1 3 100
4810
10600
4430
9770
4200
9260
4140
91 3 0
4220
9 3 00
*3860
*8510
*4280
*9440
*4760
*10490
5020
11070
*4940
*10890
3190
70 3 0
3040
6700
2870
6 33 0
2750
6060
2710
5970
*3240
*7140
1990
4 3 90 6720
3200
7050
*3340
*7 3 60
*2930
*6460
*3390
*7470
*3360
*7410
3120
6880
3050
3 680
1750
3 860
2010
44 3 0
2680
5910
2360
5200
1920
42 3 0
1720
3 790
1670
Reach m
(ft)
(27.6)
8.13
(26.7)
7.50
(24.6)
6.37
(20.9)
7.24
(2 3 .8)
7.99
(26.2)
8.36
(27.4)
8.41
• B oo m :: 5.10m (16’ 9”) • A • B ett :: 0.70 m 3 SAE heaped • S ho e :: 600 mm (24”) triple grouser with 2.95 ton (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
NOTES
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*5680
*12520
*8890
*19600
*5680
*12520
*8890
*19600
*6640
*14640
*6650
*14660
*9340
*20590
*9150
*20170
*6330
*1 3 960
*6640
*14640
*6650
*14660
7760
17110
7900
17420
*6330
*1 3 960
1. Lifting capacity is based on SAE J1097, ISO 10567.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
*6170
*1 3 600
*6880
*15170
*6930
*15280
*6240
*1 3 760
*4220
*9 3 00
4450
9810
4180
9220
4080
8990
4110
9060
*4220
*9 3 00
*4020
*8860
*4550
*100 3 0
*4930
*10870
4910
10820
*4340
*9570
3050
6720
2860
6 3 10
2720
6000
2650
5840
2680
5910
*2940
*6480
3600
7940
3530
7780
2050
4520
1970
4 3 40
1910
4210
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
*3120
*6880
*3110
*6860
2900
6 3 90
2830
6240
2950
6500
*3210
*7080
*2970
*6550
1580
3 480
1800
3 970
2320
5110
2130
4700
1760
3 880
1580
3 480
1520
33 50
Reach m
(ft)
7.66
(25.1)
8.37
(27.5)
8.72
(28.6)
8.77
(28.8)
8.50
(27.9)
7.90
(25.9)
6.86
(22.5)
HYUNDAI CONSTRUCTION EQUIPMENT 20 /
21
R160LC-7A_new_en 18-10-2007 14:11 Pagina 22
N
otes
R160LC-7A_new_en 18-10-2007 14:11 Pagina 23
HYUNDAI CONSTRUCTION EQUIPMENT 22 /
23
R160LC-7A_new_en 18-10-2007 14:11 Pagina 24
Robex 160
LC-7A
Standard Equipment
ISO standard cabin
•
•
•
•
All-weather steel cab with all-around visibility
Safety glass windows
Rise-up type windshield wiper
Sliding fold-in front window
•
•
•
•
Sliding side window
Lockable door
Hot & cool box
Accessory box & Ash-tray
Computer Aided Power
Optimization(New CAPO) system
•
2-power mode, 3-work mode, 2-user mode
•
•
•
Auto deceleration & one touch deceleration system
Auto warm up system
Auto overheat prevention system
Air-conditioner (5,000 kcal/hr; 20,000 BTU/hr)
FATC (Full Automatic Temperature Control)
Self diagnostic system
Starting Aid, cold weather
Centralized monitoring
• LCD display
Engine speed
•
Clock & Error code
Gauges
Fuel level gauge
Engine coolant temperature gauge
•
Hyd. oil temperature gauge
Warning
Engine coolant & Fuel level
Check Engine & CPU
Engine oil pressure
Engine coolant temperature
Hyd. oil temperature
Low battery
•
Air cleaner clogging
Indicator
Power max.
Preheat & Engine warming-up
One touch decel
Door and cab locks, one key
AM/FM radio and CD
• Radio remote switch
Two outside rearview mirrors
Fully adjustable suspension seat with seat belt
Slidable joystick, pilot-operated
Console box tilting system(LH.)
Three front working lights
Electric horn
Batteries (2 x 12 V x 100 AH)
Battery master switch
Automatic swing brake
Removable reservoir tank
Boom holding system
Arm holding system
Counterweight (2,950 kg; 6,500 lb)
Mono boom (5.1 m; 16’ 9”)
Arm (2.6 m; 8’ 6”)
Safety lock valve for boom cylinder with overload warning device
Single acting piping kit( breaker, etc)
Double acting piping kit(clamshell, etc)
Track shoes (600 mm, 24”)
Track rail guard
Fuel filler pump(35 l/min; 9.5 USgpm)
Optional Equipment
Heater & Defroster
Sun visor for cabin inside
Beacon lamp
Safety lock valve for arm cylinder
Accumulator, work equipment lowering
12 volt power supply(DC - DC converter)
Electric transducer
Travel alarm
Various optional Arms
•
•
Short arm (2.20 m; 7’ 3”)
Long arm (3.10 m; 10’ 2”)
Various optional Buckets(SAE heaped)
•
•
•
•
•
•
Standard bucket (0.70m
3 ; 1.20 yd 3 )
Narrow bucket (0.39 m 3 ; 0.51 yd 3 )
Narrow bucket (0.50 m 3 ; 0.44 yd 3 )
Narrow bucket (0.64 m 3 ; 0.55 yd 3 )
Light duty bucket(0.89 m 3 ; 1.16 yd 3 )
Heavy duty bucket(0.69 m 3 ; 0.9 yd 3 )
Cabin lights
Cabin FOPS/FOG (IOS 10262)
Cabin Roof Cover - Transparent Type
Track shoes
•
•
Triple grousers shoe (500 mm; 20”)
Triple grousers shoe (700 mm; 28”)
Lower frame under cover
Preheating system
Tool kit
Operator suit
Special cooling
• Air vent type side door
Low noise kit
Seat
• Adjustable air suspension seat
•
•
Mechanical suspension seat with heater
Adjustable air suspension seat with heater
Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.
All US measurement rounded off to nearest pounds or inches.
PLEASE CONTACT
www.hyundai-ce.com
EN - 2007. 07 Rev 0.

Public link updated
The public link to your chat has been updated.
Advertisement