Pro-Ject 2Xperience Primary Acryl Product information

Pro-Ject 2Xperience Primary Acryl Product information
PRODUCT INFORMATION
2Xperience Primary Acryl
Limited edition turntable
MSRP 899 € (incl. VAT)
colour options:
Principle: Belt drive
� Belt driven turntable with 2-step pulley
� Stand-alone motor base
� 33/45 rpm with manual speed change
� MDF platter with felt mat
Platter: MDF
Nominal speeds: 33/45 rpm
Speed variance: +/-0,6%
Wow and flutter: +/-0,13%
Signal to noise: -65dB
Tonearm: 9”; aluminium
� 9” aluminium tonearm
Effective tonearm length: 9“ (230mm)
� Audiophile grade tonearm cable Connect it E included
Effective tonearm mass: 15g
� With or without pre-mounted Ortofon 2M Red cartridge
� Available in four different transparent acrylic finishes:
blue, green, orange, transparent acrylic
Overhang: 18mm
Optional MM Cartridge: Ortofon 2M Red, pre-mounted
Accessories: RCA cable, power supply
Turntable lid: Only included in transparent acrylic colour
option
Power consumption: 5W max/ >0,5W standby mode
Outboard power supply: 15V DC / 800m A, 90-264V AC,
47 – 63Hz
Dimensions (W x H x D): 465 x 130 x 340mm
Weight: 6,5 kg
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
Technical data and price changes reserved.
Page 1/2
PRODUCT INFORMATION
Limited edition audiophile turntable
with acrylic chassis and
class-leading sound!
2Xperience Primary Acryl is an ultra-stylish record
player that uses advanced technology for great sound.
A quiet running AC motor with a two-step pulley drives
the platter‘s outside edge via a belt. The resonanceoptimised MDF platter runs on a low-tolerance stainless-steel axle with Teflon bearing plate in a sintered bronze bearing housing. The
transparent acrylic plinth stands on three heightadjustable TPE-damped aluminium cones. An
external power supply avoids potential electro-mechanical
interference. The sophisticated 9“ tonearm uses an
one-piece aluminium headshell & armtube and an
inverted bearing design with four hardened ABEC7 spec
ballraces. The solid armbase permits accurate height
adjustment of armtube and VTA (vertical tracing angle) if
blue
*Record clamp optionally available
needed. The internal wiring consists of flexible high-purity
copper from the headshell right through to the gold-plated
phono sockets. Optional it is available with pre-mounted
high-quality moving magnet cartridge Ortofon 2M Red.
green
orange
transparent acrylic
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
Technical data and price changes reserved.
Page 2/2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement