Howdens WKP1560 Installation guide

Howdens WKP1560 Installation guide
Mirror Chip Laminate Worktop
Important Care Information
Care should be taken when handling the Mirror Chip laminate
worktops particularly after cutting has taken place as the
worktop cut edge could be sharp.
The sharpness of the edge can be removed by using a 240 grit
sandpaper with sanding block or an engineers file, making sure
care is taken not to damage the worksurface.
Under no circumstances should fingers or hands be run along
the raw cut edge until the sharpness has been removed.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF