Currys Essentials | C7PDVD12 | Quick start guide | Currys Essentials C7PDVD12 Quick start guide

QUICK START GUIDE
Step 3
Step 4
Power Supply
Using the Mains Adapter
(for indoor use)
Connections
Connecting a TV and Using Earphones
PORTABLE DVD PLAYER
Right Side of DVD Player
Right Side of DVD Player
C7PDVD12
COAXIAL
COAXIAL
To Mains
Socket
To AV OUT Sockets
Mains Adapter (included)
To Earphone Socket
TV
To DC IN 9V-12V
Socket
Audio /
Video Cable
(not included)
Headphones /
Earphones
(not included)
Using the Car Power Adapter
(for in-car use)
Do not connect the TV and the DVD player to the mains
supply until you have completed all the connections.
Right Side of DVD Player
COAXIAL
Car Power Adapter (included)
To Cigarette
Lighter Socket
Step 1 Unpacking
Step 2 Operating Your Remote Control
Remove all packaging from the unit. Retain the packaging. If you
dispose of it please do so according to any local regulations.
DVD Player
Remote Control
Mains Adapter
Removing the Insulating Strip from the Remote Control
Remove the insulating mylar strip from
the battery if the battery is being used
for the first time. It is located at the
bottom rear of the remote control.
To DC IN 9V-12V
Socket
Step 5 Basic Operation
1. Switch the ON/OFF button to ON on the side panel to turn the
DVD player on.
Right Side of DVD Player
COAXIAL
MUTE
2
3
4
6
7
8
9
0
10+
DISPLAY
SUBTITLE
AUDIO
The remote control requires a CR2025,
3V Lithium battery (included).
1. Slide and hold the battery release
tab in the direction of the arrow.
A-B
1
5
MENU
TITLE
ENTER
MODE
VOLREPEAT
VOL+
3. Press the button on the front panel to open the disc tray. Put the
disc (labelled side upwards) into the disc tray.
2. The DVD logo (start-up picture) will appear on the screen.
4. Hold the disc by its sides and carefully place onto the spindle with the
label side facing up. Gently push the disc down until you hear a
“click”.
3. After use, switch the ON/OFF button to OFF on the side panel
to turn the DVD player off.
5. Close the disc door. It takes a
short while for your unit to
load the disc. After loading,
the unit will automatically
display the main menu of
the DVD or start playing the
DVD. If the unit does not
automatically start playing
the DVD, press the
OPEN
button.
ON
OFF
SLOW
ZOOM
2. Pull out the battery holder and
remove the old battery.
Car Power
Adapter
Instruction
Manual
Quick Start
Guide
Instruction
Manual
Quick Start Guide
3. Replace with a new battery.
4. Insert the battery holder back
into the remote control.
1. Make sure your unit is either plugged into the power socket or the
battery is fully charged. Switch the ON/OFF button to ON to turn
your DVD player on.
2. Open and adjust the screen angle.
Changing battery of the Remote Control
STEP
Playing a Disc
Tip:
Well done, your new DVD player is now ready to use.
You will find that there are many exciting features available. To get to know all these features, please take some time to
read the instruction manual provided with your DVD player.
QSG-C7PDVD12-141121V3

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project