2 Tools Required 1 Contents x1 3 Assembly & Specifications Pick-UP device Picture Elements (PAL) Image Size Synchronisation Horizontal Illumination Lens Focal Length Signal to Noise Ratio Required Illumination Voltage Supply Power Consumption Maximum Aperture Current Consumption Viewing Angle Operating Temperature Storage Temperature Weight Overall Dimensions (mm) Video Output Length of Cable Vibration Rating IP Rating of Connector IP Rating of Housing Casing Mounting Thread Connections SILICONE SEALANT Optional. Apply as necessary x1 7 mm Ø x1 x1 x1 18.5cm x1 x1 10 mm 182cm x1 Specifications subject to change. 4 Vertical Mount 5 Horizontal Mount BE-500VC BE-500HC 1. 2. 3. 4. 5. N.C N.C Video out DC 12Vdc Ground BE-500 Series Colour Flush-Mount Cameras 1 3 2 4 5 The BE-500 series cameras are an invaluable driver aid but does not exempt the driver from taking every normal precaution when conducting a manoeuvre. No liability arising out of the use or failure of the product can in any way be attached to Brigade or to the distributor. Original Equipment Manufacture bodybuilder guide or aftermarket installation guidelines must be followed when installing this product. Failure to comply with this may invalidate the vehicles warranty. Brigade Electronics plc Sharp 1/4” CCD 512 (h) x 582 (V) 1/4 inch Internal 380 TV Line 1.65 mm More than 42db 0.1 Lux 12 Vdc ± 2 Vdc <0.85 Watts @ 12 Vdc 2.0mm ± 5% 65mA @ 12 Vdc 122° (H), 94° (V), 154° ± 5°(D) –25°C to +80°C –40°C to +90°C 80 Grams (without cable adaptor) 34 (W), 37 (D), 24 (H) 1.0 Vp-p/75 Ω 2000mm 10G N/A IP68 M6 BE-500XC IG issue 2 2017 11.09 3163A Installation Guide
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021