Qolsys QZ2101-840 IQ SMART PLUG Quick Guide
QOLSYS QZ2101-840 is a smart plug that allows you to control and monitor your devices remotely. It can be easily integrated with your Z-Wave system, enabling you to automate your home appliances and create custom scenes. With its ability to measure voltage, current, and power consumption, you can optimize energy usage and prevent overloading. The QZ2101-840 extends your smart home capabilities, providing convenience, security, and energy efficiency at your fingertips.
Advertisement
Advertisement
IQ SMART PLUG QUICK INSTALL GUIDE
DESCRIPTION
The Smart Plug is an intelligent device that can be controlled remotely. Monitor voltage, current, instant power or accumulated power from your smart device.
SPECIFICATIONS
Dimensions: 43MM x 43MM x 45MM
Input Voltage: 110-230VAC 50/60HZ
Max Current: 13A
Rated Input Current:
10A, 110-230V, 50/60Hz Continuous load current
16A, 110-230V, 50/60Hz Instantaneous load current
Operating Temperature: 32°F~104°F
Storage Temperature: 32°F~140°F
Range: Up to 195’ outdoors, Up to 98’ indoors
STEP
1
LEARN
INTO
PANEL
Plug Smart Plug into an outlet close to the panel
Select “Add Device" under
Z-Wave device installation x3
Press the button three times in
1.5 sec to “enroll” the device
PLEASE NOTE: PAIRING THE IQ SMART PLUG NEAR THE IQ PANEL IS FOR CONVENIENCE ONLY. ONCE IQ SMART PLUG HAS
BEEN SUCCESSFULLY PAIRED IT CAN BE MOVED ANYWHERE WITHIN ACCEPTABLE RANGE (APPROX 100 FEET OPEN AIR)
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)
STEP
2
READING
LED
INDICATOR
LED Color
Green
Pink
Blue
Yellow
Red
LED Display Status
Blink 5 times in 2 seconds
Light On
Blink 5 times in 1 second
Blink 5 times in 2 seconds
Blink 5 times in 300ms
Light ON
Blink One Time
Blinking once per second
Description
Inclusion Mode
Plug Powered On
Powered on, no Z-Wave inclusion
Exclusion Mode
Z-Wave included plug added to power
Current Overload Warning
Plug needs reset. Hold button for 10-15 seconds
Current Overload Shutdown
Document#: IQSP—QG-01-19
Revision#: 1/28/19
Issue Date: JAN 2019
Qolsys Product #: QZ2101-840
Qolsys Inc. proprietary.
Reproduction without permission is not permitted.
FCC ID: 2ASYY-W335019A
IC: 24969-S335019A
GOT QUESTIONS?
CONTACT TECH SUPPORT
[email protected]
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.

Public link updated
The public link to your chat has been updated.
Advertisement