IQ SIREN QUICK INSTALL GUIDE
FEATURES & OVERVIEW
The IQ Siren is a wireless Z-Wave device that allows you to have additional sirens placed throughout the home.
It plugs into any standard outlet, acts as a repeater in the Z-Wave network, has a rechargeable back up battery and three LED lights that strobe when the siren is triggered.
Mounting Locations:
• Kitchen
• Living Room
• Basement
• Bedrooms
• Garage
Pair up to 3 IQ Sirens with the IQ Panel.
SPECIFICATIONS
Built-in Lithium Battery: 430 mAh
Alarm Power: 1.7W
Max Standby Power: 0.7W
Max Volume: 105dB
Operating Temperature: 0°C to 40°C
Operating Distance: Up to 550 feet outdoors
Frequency Type : Z-Wave Plus
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)
STEP
1
DETERMINE
INSTALLATION
LOCATION
STEP
2 PREPARE THE IQ PANEL TO
ENROLL THE IQ SIREN
Plug in the IQ Siren at desired location
Select “Add device” from Z-Wave menu
INCLUDE
Press the
“Include" button
STEP
3 PAIRING WITH
THE IQ PANEL
Press the button on the bottom of the IQ
Siren once to enroll with the IQ Panel.
(LED will flash)
✓
Customize name
Complete pairing process by touching Add
Test device to ensure proper function
Document#: IQSIREN-QG-05-19
Revision#: 05/15/19
Issue Date: MAY 2019
Qolsys Product #: QZ2300-840
Qolsys Inc. proprietary.
Reproduction without permission is not permitted.
FCC ID: XBAZW080
GOT QUESTIONS?
CONTACT TECH SUPPORT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
