Qolsys QS-2100-P01 IQ SMART SOCKET Quick Guide
QOLSYS QS-2100-P01 is a smart socket that allows you to control your home appliances remotely. It can be used to turn on/off lamps, electronics, appliances, or anything else that can be plugged into an outlet. The socket is easy to set up and use. Simply plug it into an outlet, pair it with your IQ Panel, and then you can control it from anywhere within range (approximately 100 feet open air). You can also customize the name and settings of the socket to your liking. The socket has a maximum current of 15A or 1800W, so it can handle most household appliances.
Advertisement
Advertisement
IQ SMART SOCKET QUICK INSTALL GUIDE
STEP
1
LOCATE
OUTLET
NEAR PANEL
✓
PLEASE NOTE:
PAIRING THE IQ SMART
SOCKET NEAR THE IQ PANEL IS
FOR CONVENIENCE ONLY.
ONCE IQ SMART SOCKET HAS
BEEN SUCCESSFULLY PAIRED
IT CAN BE MOVED ANYWHERE
WITHIN ACCEPTABLE RANGE
(APPROX 100 FEET OPEN AIR)
STEP
2
PLUG
INTO
OUTLET
STEP
3
PAIR
WITH
PANEL
STEP
4
DECIDE
WHAT TO
CONTROL
Place your panel in
“autolearn" mode
LAMPS
STEP
5
LOCATE
DESIRED
OUTLET
ELECTRONICS
STEP
6
PLUG IN
SMART
SOCKET
APPLIANCES
STEP
7
SECURE
INTO
PLACE
ANYTHING
Press button on bottom to “tamper” the device
ADD
Customize name and settings as desired and and touch “ADD”
STEP
8
PLUG
DEVICE
IN
DOCUMENT INFORMATION SUPPORT
Document#: IQSS-QG-03-17
Revision#: 03222017
Issue Date: MAR 2017
Qolsys Part #: QS-2100-P01
Firmware : 2016_08_26_9D7C
GOT QUESTIONS?
CONTACT TECH SUPPORT
[email protected]
FCC ID: 2AAJXQS2100
IC: 11205-QS2100
Qolsys Inc. proprietary.
Reproduction without permission is not permitted.
Max current 15A or 1800W
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.

Public link updated
The public link to your chat has been updated.
Advertisement