Stairville BladeSting 8 RGBW Beam Mover Owner's Manual
Add to my manuals68 Pages
Stairville BladeSting 8 RGBW Beam Mover is a professional moving head light with 8x 10W RGBW LEDs, designed for professional use in clubs, theaters, and other venues. It features various operating modes, including DMX, stand-alone, and master/slave, allowing for flexible control options. The device offers a wide range of built-in programs, colors, and effects, providing endless creative possibilities for lighting design.
advertisement
Blade Sting 8
RGBW Beam Mover moving head user manual
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: [email protected]
Internet: www.thomann.de
14.01.2020, ID: 375688 (V4)
Table of contents
Table of contents
1
General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 7
2
Safety instructions.................................................................................................................................. 10
3
Features....................................................................................................................................................... 18
4
Installation and starting up................................................................................................................ 19
5
Connections and controls................................................................................................................... 26
6
Operating.................................................................................................................................................... 32
6.1 Operating modes............................................................................................................................. 33
6.2 System settings................................................................................................................................. 37
6.3 Menu overview................................................................................................................................. 40
6.4 Functions in 12-channel DMX mode........................................................................................ 43
6.5 Functions in 16-channel DMX mode........................................................................................ 44
6.6 Functions in 40-channel DMX mode........................................................................................ 48
Blade Sting 8 RGBW Beam Mover
3
Table of contents
6.7 Functions in 44-channel DMX mode........................................................................................ 52
7
Technical specifications....................................................................................................................... 57
8
Plug and connection assignments.................................................................................................. 60
9
Troubleshooting...................................................................................................................................... 61
10
Cleaning....................................................................................................................................................... 63
11
Protecting the environment.............................................................................................................. 64 moving head
4
General information
1 General information
This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under
www.thomann.de
.
Blade Sting 8 RGBW Beam Mover
5
General information
1.1 Further information
On our website (
www.thomann.de)
you will find lots of further information and details on the following points:
Download
Keyword search
Service
This manual is also available as PDF file for you to download.
Use the search function in the electronic version to find the topics of interest for you quickly.
Online guides
Our online guides provide detailed information on technical basics and terms.
Personal consultation For personal consultation please contact our technical hotline.
If you have any problems with the device the customer service will gladly assist you.
moving head
6
General information
1.2 Notational conventions
This manual uses the following notational conventions:
Letterings
The letterings for connectors and controls are marked by square brackets and italics.
Examples:
[VOLUME]
control,
[Mono]
button.
Displays
Texts and values displayed on the device are marked by quotation marks and italics.
Examples:
‘24ch’
,
‘OFF’
.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
Blade Sting 8 RGBW Beam Mover
7
General information
Signal word
DANGER!
WARNING!
CAUTION!
NOTICE!
Warning signs
Meaning
This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided.
Type of danger
Warning – high-voltage.
moving head
8
Warning signs
General information
Type of danger
Warning – dangerous optical radiation.
Warning – suspended load.
Warning – danger zone.
Blade Sting 8 RGBW Beam Mover
9
Safety instructions
2 Safety instructions
Intended use
This device is intended for use as a freely moving multifunctional spotlight. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating conditions is consid‐ ered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the operating life of the device by regular breaks and by avoiding frequent switching on and off. The device is not suitable for continuous operation.
moving head
10
Safety
Safety instructions
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or damaged.
Blade Sting 8 RGBW Beam Mover
11
Safety instructions
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐ tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a regis‐ tered electrician.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.
moving head
12
Safety instructions
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain.
The load capacity of trusses or other fixtures must be sufficient for the intended number of devices. Not that the movement of the head places additional loads on the load-bearing parts.
Blade Sting 8 RGBW Beam Mover
13
Safety instructions
CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce very bright light. This is also valid immediately after you turn on the device, when the device operates in automatic mode or under remote control and when you turn off a
DMX controller that is connected to the device. Persons staying near the device could be injured or frightened.
Before you turn on the device and during the operation, always ensure that nobody stays close to the device. If work has to be performed in the area of move‐ ment or in the near vicinity of the device, it must remain turned off.
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames.
moving head
14
Safety instructions
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations.
Only operate the device within the ambient conditions specified in the chapter
‘Technical specifications’ of this user manual. Avoid heavy temperature fluctua‐ tions and do not switch the device on immediately after it was exposed to tem‐ perature fluctuations (for example after transport at low outside temperatures).
Dust and dirt inside can damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by qualified service personnel at regular intervals to prevent overheating and other malfunction.
The device must not be moved during use.
Blade Sting 8 RGBW Beam Mover
15
Safety instructions
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, laminate or PVC floor and after some time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad floor protectors or a carpet.
moving head
16
Safety instructions
NOTICE!
Possible damage due to installation of a wrong fuse
The use of different types of fuses can cause serious damage to the unit. Fire hazard!
Only fuses of the same type may be used.
Blade Sting 8 RGBW Beam Mover
17
Features
3 Features
n 8 × 4-in-1 quad colour LEDs (RGBW, 10 watt each) n narrow beam angle (approx. 2 degree/lens) n adjustable PAN and TILT area n
Control via DMX (4 different modes) and buttons and display on the unit n
6 preprogrammed automatic shows n
Sound control n
Stand-alone mode n
Master / Slave mode n
Lockable connectors (Power Twist) for self-supply and for supplying further devices n suitable for wall and truss mounting n
Power supply cable (Power Twist) and Omega brackets included
For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
moving head
18
Installation and starting up
4 Installation and starting up
Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Lift the device only at the base. When lifted at the rotatable mounting, the device may be dam‐ aged.
You can install the device standing or hanging. When in use, the device must be mounted at a solid surface or clamped to an approved truss.
Work from a stable platform whenever you install or move the device or when you perform any kind of maintenance. Block access under the work area.
Blade Sting 8 RGBW Beam Mover
19
Installation and starting up
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain.
The load capacity of trusses or other fixtures must be sufficient for the intended number of devices. Not that the movement of the head places additional loads on the load-bearing parts.
moving head
20
Installation and starting up
CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce very bright light. This is also valid immediately after you turn on the device, when the device operates in automatic mode or under remote control and when you turn off a
DMX controller that is connected to the device. Persons staying near the device could be injured or frightened.
Before you turn on the device and during the operation, always ensure that nobody stays close to the device. If work has to be performed in the area of move‐ ment or in the near vicinity of the device, it must remain turned off.
NOTICE!
Risk of overheating
The distance between light output and the illuminated surface must be more than 1.5 m (19.7in).
Provide sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
Blade Sting 8 RGBW Beam Mover
21
Installation and starting up
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers.
moving head
22
Mounting options
Installation and starting up
The quick-release holes on the bottom are used to secure wall or truss mounting of the device using omega brackets. Additionally secure the device by a safety cable against falling.
A Quick-release hole for attaching Omega brackets.
B Hole for safety cable.
Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
Blade Sting 8 RGBW Beam Mover
23
Installation and starting up
Connections in DMX mode
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω,
¼
W).
24 moving head
Installation and starting up
Please note that this device must not be connected to a dimmer.
Blade Sting 8 RGBW Beam Mover
25
Connections and controls
5 Connections and controls
26 moving head
1 8 × LED RGBW.
2 Grab handle
3 Operating panel with display.
4 Connector panel with main switch, voltage supply and DMX connections.
Connections and controls
Blade Sting 8 RGBW Beam Mover
27
Connections and controls
Operating panel with display
28 moving head
5 Display
6
[Mode]
Activates the main menu and toggles between menu items. Closes an opened submenu.
7
[Setup]
Selects an option of the respective operating mode, confirms the set value.
8
[Up]
Increases the displayed value by one.
9
[Down]
Decreases the displayed value by one.
Connections and controls
Blade Sting 8 RGBW Beam Mover
29
Connections and controls
Connector panel with main switch, voltage supply and DMX connections
30 moving head
10
[ON | OFF]
Main switch to turn the device on and off.
11
[Power In]
Lockable input socket (Power Twist) for power supply.
12
[Power Out]
Lockable output socket (Power Twist) to supply further units.
13
[DMX In]
DMX input
14
[DMX Out]
DMX output
15 Fuse holder
Blade Sting 8 RGBW Beam Mover
Connections and controls
31
Operating
6 Operating
Connect the device to the power supply to start operation. After a few seconds, the display indicates that a reset is in progress. At the same time, all axes are moved to the respective starting position. The device is then ready for use.
Press repeatedly
[Mode]
or
[Up]
or
[Down]
to select an operating mode: n AUTO n
SHOW n
SOUND n
DMX n
SLAVE
If you don't press any button for about seven seconds the display turns off.
moving head
32
Operating
6.1 Operating modes
AUTO
Automatic operation can only be activated when the unit is operating alone or as master in a master / slave combination. This setting is only relevant if the device is not controlled via DMX.
Press repeatedly
[Mode]
or
[Up]
or
[Down]
until the display shows
‘AUTO’
. Automatic operation starts immediately with the last used settings.
Setting options in AUTO mode
Several auto operation parameters can be adjusted in the ‘Auto’ menu. Switch to operating mode AUTO and use
[Setup]
to open the related menu.
Repeatedly press
[Setup]
to successively call various menu options. When the display shows the desired option (mode), the related value can be adjusted using
[Up]
or
[Down]
.
With
[Setup]
you get to the next menu level. With
[Mode]
you return to the previous menu level.
Blade Sting 8 RGBW Beam Mover
33
Operating
Parameter / mode
LED / Auto
LED / Color
LED / Dimmer
Pan / p-Auto
Pan / p-Manual
Pan / p-CW
Pan / p-CCW
Tilt1 / p-Auto
Tilt1 / p-Manual
Tilt2 / p-Auto
Tilt2 / p-Manual
34
Function
Colour selection and dimmer settings follow the preprogrammed show programmes, moving speed (
‘Speed’
) and flash frequency for strobe effect (
‘Freq.’
) are adjustable.
Solid colour selection (
‘Static’
) and flash frequency setting for strobe effect (
‘Freq.’
).
Dimmer setting (
‘Dimmer’
) and flash frequency setting for strobe effect (
‘Freq.’
).
Rotation follows preprogrammed show programmes.
Rotation stops in the predefined angle position.
Clockwise rotation, speed adjustable (
‘Speed 1 … 16’
).
Counter-clockwise rotation, speed adjustable (
‘Speed 1 … 16’
).
Tilting motion follows preprogrammed show programmes.
Tilting motion stops in the predefined angle position.
Tilting motion follows preprogrammed show programmes.
Tilting motion stops in the predefined angle position.
moving head
SHOW
SOUND
Operating
A preprogrammed automatic show can only be activated when the unit is operating alone or as master in a master / slave combination. This setting is only relevant if the device is not con‐ trolled via DMX.
Press repeatedly
[Mode]
or
[Up]
or
[Down]
until the display shows
‘SHOW’
.
Press
[Setup]
and use
[Up]
and
[Down]
to select one of the preprogrammed automatic shows
‘Show1’
…
‘Show6’
.
Sound control can only be activated when the unit is operating alone or as master in a master / slave combination. This setting is only relevant if the device is not controlled via DMX.
Press repeatedly
[Mode]
or
[Up]
or
[Down]
until the display shows
‘SOUND’
.
Press
[Setup]
and use
[Up]
and
[Down]
to adjust the sensitivity for the sound control in a range of
‘S: 000’
…
‘S: 031’
.
Blade Sting 8 RGBW Beam Mover
35
Operating
DMX
This setting is only relevant when the device is controlled via DMX.
Press
[Mode]
repeatedly until the display shows
‘DMX’
. Press
[Setup]
. First use
[Up]
or
[Down]
to highlight the menu item
‘Address’
.
Use
[Up]
or
[Down]
to specify the desired DMX address in a range from
‘001’
…
‘512’
.
Use
[Mode]
to return to the parent menu and use
[Up]
or
[Down]
to highlight the menu item
‘Channel’
. Now you can select one of the following DMX modes: n
‘12Chs’
(twelve channels) n
‘16Chs’
(sixteen channels) n
‘40Chs’
(forty channels) n
‘44Chs’
(forty-four channels)
Make sure that the setting matches the configuration of your DMX controller. The following table shows the highest possible first DMX address for the various DMX modes.
moving head
36
SLAVE
Operating
Mode
12-channel
16-channel
40-channel
44-channel
Highest possible DMX address
501
497
473
469
This setting is only relevant if the device is working as Slave in a Master / Slave configuration and is not controlled via DMX. To activate the operating mode, repeatedly press
[Mode]
or
[Up]
or
[Down]
until the display shows
‘SLAVE’
.
To quit the operating mode, press again
[Mode]
,
[Up]
or
[Down]
.
6.2 System settings
In
‘SETTINGS’
menu, you can customise several device parameters.
Blade Sting 8 RGBW Beam Mover
37
Operating
Parameter / mode
BL Time Option
Adjust
Reset
Power
Error
Lam
To open the menu press
[Mode]
or
[Up]
or
[Down]
repeatedly, until the display shows
‘SETTINGS’
and confirm with
[Setup]
.
Use
[Up]
and
[Down]
to select the desired menu item and confirm with
[Setup]
. Change the dis‐ played value with
[Up]
or
[Down]
.
With
[Mode]
you return to the previous menu level.
Function
Duration display backlight:
‘5s’
,
‘10s’
,
‘20s’
,
‘30s’
or
‘on’
.
Fine adjustment of the three movement axis:
‘Pan’
,
‘Tilt1’
and
‘Tilt2’
.
Reset of all device settings. When resetting to factory defaults, the display shows
‘Factory Reset …’
.
Display of the supply and motor voltage of the device.
Display of error messages from the self-test. When there is no error message present, the display shows the value
‘000000’
. With
[Setup]
error codes can be displayed.
LED status information query.
moving head
38
Parameter / mode
Use
Sensor
About
X Angle
Y1 Angle
Y2 Angle
Operating
Function
LED uptime query. With
[Setup]
the value can be reset. The display shows the safety prompt
‘Clear Y/N?’
.
Movement axis query:
‘P-Hall’
,
‘T1-Hall’
and
‘T2-Hall’
. Upon deviation,
‘Hall not good’
is displayed for the respective axis.
Via parameters
‘p-Rast’
,
‘t1-Ras’
and
‘t2-Ras’
you can enable or disable the axis stop at position 90 degree, 180 degree, 360 degree or 540 degree.
General device data query. With
[Setup]
the information menu to call available data is opened.
Definition of rotation movement axis stop position:
‘Pan 180’
,
‘Pan 360’
or
‘Pan 540’
.
Definition of tilting movement axis stop position:
‘Tilt1 90’
or
‘Tilt1 180’
.
Definition of tilting movement axis stop position:
‘Tilt2 90’
or
‘Tilt2 180’
.
Blade Sting 8 RGBW Beam Mover
39
Operating
6.3 Menu overview
Menu AUTO
40 moving head
Operating
Menus SHOW, SOUND, DMX,
SLAVE
Blade Sting 8 RGBW Beam Mover
41
Operating
Menu SETTINGS
42 moving head
6.4 Functions in 12-channel DMX mode
4
5
2
3
6
7
Channel
1
Value
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
Function
Rotation movement, 0
°
… 180
°
/ 360
°
/ 540
°
Fine adjustment rotation position
Tilting movement 1 (upper LED row), 0
°
… 90
°
/ 180
°
Fine adjustment tilting position 1 (upper LED row)
Tilting movement 2 (lower LED row), 0
°
… 90
°
/ 180
°
Fine adjustment tilting position 2 (lower LED row)
Movement speed rotation and tilting movement, increasing speed
Channel
8
Value
0 … 129
130 … 192
Function
No function.
Clockwise rotation movement, speed increasing
Blade Sting 8 RGBW Beam Mover
Operating
43
9
10
11
12
Operating
Channel Value
193 … 255
0 … 255
0 … 255
0 … 255
0 … 255
Function
Counter-clockwise rotation movement, speed increasing
Intensity red LED (0 % … 100 %)
Intensity green LED (0 % … 100 %)
Intensity blue LED (0 % … 100 %)
Intensity white LED (0 % … 100 %)
6.5 Functions in 16-channel DMX mode
2
3
Channel
1
Value
0 … 255
0 … 255
0 … 255
Function
Rotation movement, 0
°
… 180
°
/ 360
°
/ 540
°
Fine adjustment rotation position
Tilting movement 1 (upper LED row), 0
°
… 90
°
/ 180
° moving head
44
7
8
5
6
Channel
4
Channel
9
10
11
Value
0 … 255
0 … 255
0 … 255
0 … 255
0 … 129
130 … 192
193 … 255
Value
0 … 255
0 … 255
0 … 255
Function
Fine adjustment tilting position 1 (upper LED row)
Tilting movement 2 (lower LED row), 0
°
… 90
°
/ 180
°
Fine adjustment tilting position 2 (lower LED row)
Movement speed rotation and tilting movement, decreasing speed
No function.
Clockwise rotation movement, speed decreasing
Counter-clockwise rotation movement, speed increasing
Function
Dimmer function, all LEDs
Intensity red LED (0 % … 100 %)
Intensity green LED (0 % … 100 %)
Blade Sting 8 RGBW Beam Mover
Operating
45
Operating
Channel
12
13
Value
0 … 255
0 … 255
Function
Intensity blue LED (0 % … 100 %)
Intensity white LED (0 % … 100 %) moving head
46
Channel
14
15
16
Value
0 … 9
10 … 19
20 … 29
30 … 39
40 … 49
50 … 59
60 … 69
70 … 79
80 … 129
130 … 255
0 … 255
0 … 14
15 … 255
Function
No function.
Auto operation
Preprogrammed automatic show no. 01
Preprogrammed automatic show no. 02
Preprogrammed automatic show no. 03
Preprogrammed automatic show no. 04
Preprogrammed automatic show no. 05
Preprogrammed automatic show no. 06
No function
Sound-controlled operation, increasing sensitivity
Chaser light speed, auto operation, if channel 14 = 10 … 19
No function
Flash frequency
Blade Sting 8 RGBW Beam Mover
Operating
47
Operating
6.6 Functions in 40-channel DMX mode
6
7
8
4
5
2
3
Channel
1
Value
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 129
130 … 192
193 … 255
Function
Rotation movement, 0
°
… 180
°
/ 360
°
/ 540
°
Fine adjustment rotation position
Tilting movement 1 (upper LED row), 0
°
… 90
°
/ 180
°
Fine adjustment tilting position 1 (upper LED row)
Tilting movement 2 (lower LED row), 0
°
… 90
°
/ 180
°
Fine adjustment tilting position 2 (lower LED row)
Movement speed rotation and tilting movement, increasing speed
No function.
Clockwise rotation movement, speed increasing
Counter-clockwise rotation movement, speed increasing moving head
48
16
17
18
19
20
12
13
14
15
Channel
9
10
11
Value
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
Function
Intensity red LED1 (0 % … 100 %)
Intensity green LED1 (0 % … 100 %)
Intensity blue LED1 (0 % … 100 %)
Intensity white LED1 (0 % … 100 %)
Intensity red LED2 (0 % … 100 %)
Intensity green LED2 (0 % … 100 %)
Intensity blue LED2 (0 % … 100 %)
Intensity white LED2 (0 % … 100 %)
Intensity red LED3 (0 % … 100 %)
Intensity green LED3 (0 % … 100 %)
Intensity blue LED3 (0 % … 100 %)
Intensity white LED3 (0 % … 100 %)
Blade Sting 8 RGBW Beam Mover
Operating
49
Operating
28
29
30
31
32
24
25
26
27
Channel
21
22
23
Value
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
Function
Intensity red LED4 (0 % … 100 %)
Intensity green LED4 (0 % … 100 %)
Intensity blue LED4 (0 % … 100 %)
Intensity white LED4 (0 % … 100 %)
Intensity red LED5 (0 % … 100 %)
Intensity green LED5 (0 % … 100 %)
Intensity blue LED5 (0 % … 100 %)
Intensity white LED5 (0 % … 100 %)
Intensity red LED6 (0 % … 100 %)
Intensity green LED6 (0 % … 100 %)
Intensity blue LED6 (0 % … 100 %)
Intensity white LED6 (0 % … 100 %) moving head
50
36
37
38
39
40
Channel
33
34
35
Value
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
Function
Intensity red LED7 (0 % … 100 %)
Intensity green LED7 (0 % … 100 %)
Intensity blue LED7 (0 % … 100 %)
Intensity white LED7 (0 % … 100 %)
Intensity red LED8 (0 % … 100 %)
Intensity green LED8 (0 % … 100 %)
Intensity blue LED8 (0 % … 100 %)
Intensity white LED8 (0 % … 100 %)
Blade Sting 8 RGBW Beam Mover
Operating
51
Operating
6.7 Functions in 44-channel DMX mode
6
7
8
4
5
2
3
Channel
1
Value
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 129
130 … 192
193 … 255
Function
Rotation movement, 0
°
… 180
°
/ 360
°
/ 540
°
Fine adjustment rotation position
Tilting movement 1 (upper LED row), 0
°
… 90
°
/ 180
°
Fine adjustment tilting position 1 (upper LED row)
Tilting movement 2 (lower LED row), 0
°
… 90
°
/ 180
°
Fine adjustment tilting position 2 (lower LED row)
Movement speed rotation and tilting movement, decreasing speed
No function.
Clockwise rotation movement, speed decreasing
Counter-clockwise rotation movement, speed increasing moving head
52
16
17
18
19
20
21
12
13
14
15
Channel
9
10
11
Value
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
Function
Dimmer function, all LEDs
Intensity red LED1 (0 % … 100 %)
Intensity green LED1 (0 % … 100 %)
Intensity blue LED1 (0 % … 100 %)
Intensity white LED1 (0 % … 100 %)
Intensity red LED2 (0 % … 100 %)
Intensity green LED2 (0 % … 100 %)
Intensity blue LED2 (0 % … 100 %)
Intensity white LED2 (0 % … 100 %)
Intensity red LED3 (0 % … 100 %)
Intensity green LED3 (0 % … 100 %)
Intensity blue LED3 (0 % … 100 %)
Intensity white LED3 (0 % … 100 %)
Blade Sting 8 RGBW Beam Mover
Operating
53
Operating
29
30
31
32
33
25
26
27
28
Channel
22
23
24
Value
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
Function
Intensity red LED4 (0 % … 100 %)
Intensity green LED4 (0 % … 100 %)
Intensity blue LED4 (0 % … 100 %)
Intensity white LED4 (0 % … 100 %)
Intensity red LED5 (0 % … 100 %)
Intensity green LED5 (0 % … 100 %)
Intensity blue LED5 (0 % … 100 %)
Intensity white LED5 (0 % … 100 %)
Intensity red LED6 (0 % … 100 %)
Intensity green LED6 (0 % … 100 %)
Intensity blue LED6 (0 % … 100 %)
Intensity white LED6 (0 % … 100 %) moving head
54
37
38
39
40
41
Channel
34
35
36
Value
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
0 … 255
Function
Intensity red LED7 (0 % … 100 %)
Intensity green LED7 (0 % … 100 %)
Intensity blue LED7 (0 % … 100 %)
Intensity white LED7 (0 % … 100 %)
Intensity red LED8 (0 % … 100 %)
Intensity green LED8 (0 % … 100 %)
Intensity blue LED8 (0 % … 100 %)
Intensity white LED8 (0 % … 100 %)
Blade Sting 8 RGBW Beam Mover
Operating
55
Operating
Channel
42
43
44
Value
0 … 9
10 … 19
20 … 29
30 … 39
40 … 49
50 … 59
60 … 69
70 … 79
80 … 129
130 … 255
0 … 255
0 … 14
15 … 255
Function
No function.
Auto operation
Preprogrammed automatic show no. 01
Preprogrammed automatic show no. 02
Preprogrammed automatic show no. 03
Preprogrammed automatic show no. 04
Preprogrammed automatic show no. 05
Preprogrammed automatic show no. 06
No function
Sound-controlled operation, increasing sensitivity
Chaser light speed, auto operation, if channel 14 = 10 … 19
No function
Flash frequency auto operation, if channel 42 = 0 … 9 or 10 … 19 moving head
56
Technical specifications
7 Technical specifications
Light source
Light source properties
8 × 4-in-1 RGBW LED, 10 W
Light power Red: 5845 Lux / 1 m
Green: 18010 Lux / 1 m
Blue: 4375 Lux / 1 m
White: 21160 Lux / 1 m
2° Optical properties
Control
Number of DMX channels
Input connections
Output connections
Beam angle
DMX
12, 16, 40, 44
Power supply
DMX control
Power supply
DMX control
Lockable input socket (Power Twist)
XLR chassis socket, 3-pin
Lockable output socket (Power Twist).
XLR chassis socket, 3-pin
Blade Sting 8 RGBW Beam Mover
57
Technical specifications
Power consumption
Supply voltage
Fuse
Degree of protection
Mounting options
Dimensions (W × H × D)
Weight
Ambient conditions
104 W
100 – 240 V 50/60 Hz
5 mm × 20 mm, 3 A, 250 V, slow-blow
IP20
Hanging, standing
Quick-release hole for attaching Omega brackets
405 mm × 378 mm × 150 mm
6.8 kg
Temperature range
Relative humidity
0 °C…40 °C
50 %, non condensing moving head
58
Further information
Similar design
DMX control
Master/Slave
Remote control
Sound control
Display
Moving Head
Yes
Yes
Not possible
Yes
Yes
Blade Sting 8 RGBW Beam Mover
Technical specifications
59
Plug and connection assignments
8 Plug and connection assignments
Introduction
This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Please take our tips, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a short circuit or ‘just’ a not working light show!
DMX connections
The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suitable XLR plug.
2
3
Pin
1
Configuration
Ground, shielding
Signal inverted (DMX–, ‘cold signal’)
Signal (DMX+, ‘hot signal’) moving head
60
Troubleshooting
9 Troubleshooting
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers.
In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting:
Blade Sting 8 RGBW Beam Mover
61
Troubleshooting
Symptom Remedy
The unit does not work, no light 1. Check the mains connection and the main fuse.
No response to the DMX con‐ troller
2. Check the settings in manual operation.
1. Check whether the DMX cables run near or parallel to high-voltage cables that may cause damage or interfer‐ ence to a DMX interface circuit.
2. Try using another DMX controller.
If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at
www.thomann.de
.
moving head
62
Cleaning
10 Cleaning
Optical lenses
Fan grids
Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device.
n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122).
n
Always dry the parts carefully.
The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg‐ ular basis. Before cleaning, switch off the device and disconnect mains-operated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth.
Blade Sting 8 RGBW Beam Mover
63
Protecting the environment
11 Protecting the environment
Disposal of the packaging mate‐ rial
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Disposal of your old device
This product is subject to the European Waste Electrical and Electronic Equipment Directive
(WEEE) in its currently valid version. Do not dispose with your normal household waste.
Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
moving head
64
Notes
Blade Sting 8 RGBW Beam Mover
65
Notes
66 moving head
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project