BigAmp High-end in-line instrument preamp USER GUIDE © BigAmp USER GUIDE GENERAL DESCRIPTION Circuit topology BigAmp utilises a low noise jFet amplifier circuit, followed by a low impedance, balanced output buffer which reveals every detail and offers high-end sound quality. Philosophy The TritonAudio BigAmp is a small sized high quality jfet instrument preamp which performs equally well on stage as it does in a studio environment. It has a 1/4" female jack input which accepts signals ranging from the pickup of an electric guitar to the line level output of a synthesizer. BigAmp's low noise class A amplifier provides 3 dB of high end amplification and converts the instrument output signal from unbalanced to balanced. An extra benefit might be BigAmps small size, making it ultra portable. •● •● •● •● •● •● •● Features Low noise Class A JFet amplifier 3dB amplification Balanced xlr output Lots of headroom freq. response 10hz-100khz (+/- 1dB) Z-in 1MOhm 48V Phantom Power Operation Stick BigAmp on an XLR cable, plug in your electric guitar, Bass(or any other instrument with a jack output) and switch on Phantom Power. BigAmp goes directly into a balanced input of a preamp or interface. To achieve the best sonic result it is advised to use a short TRS/Jack cable between BigAmp and your instrument. Recommended application BigAmp is an ideal companion for DAW recording. By recording a clean signal directly to disk you get the advantage of being able to shape the sound of your recorded track with your favourite plugin's during mixdown. Dimensions height: 3.75’/85mm width: 0,86’/22mm
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021