IDIS DA-WM4100 Wall Mount Product Manual
Advertisement
Advertisement
DA-WM2150 INSTALLATION MANUAL
This manual is intended for users of the DA-WM2150 wall mounting bracket. It includes instructions for mounting the DA-WM2150 wall mounting bracket to a wall.
• This bracket is intended to be used with DC-D2233 series,
DC-D1212R model, or DC-D2212R model of camera. Do not use it with other models of cameras.
• This installation should be performed by a qualified service personnel in conformance to all local codes.
• You may need to reinforce the wall. If the wall is not strong enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the wall as follows:
1 Mount bracket to the wall by using the anchors and screws.
Bracket wall
Connect your camera to the bracket as follows:
2 Screw the camera body or bottom cover onto bracket.
<DC-D2233 Series >
Bracket
<DC-D1212R >
Bracket
<DC-D2212R >
Bracket
Camera
Body
Bottom
Cover
Camera
Body
3 Connect or screw the camera dome cover onto the camera body or bottom cover.
4 Turn on power.
<DC-D2233 Series >
Camera
Body
<DC-D1212R >
Bottom
Cover
<DC-D2212R >
Camera
Body
Camera
Dome
Cover
Camera
Dome
Cover
Dimensions
31.1
˚
83.9
˚
58.9
˚
32 (1.26)
80 (3.15)
Ø 108 (4.25)
Ø 90 (3.54)
96.1
˚
Ø 97.1 (3.82)
Ø 104 (4.09)
Ø 132 (5.20)
7 - M4 TAP
49
˚
41˚
2 (0.08)
47 (1.85)
58.5
˚ 58.5
˚
Camera
Dome
Cover
Unit: mm (inch)
32 (1.26) 3 - Ø 4.5 (0.18)
IDIS Co., Ltd.
For more information, please visit www.idisglobal.com
Ver.1.0

Public link updated
The public link to your chat has been updated.
Advertisement