PPRODA-CM2050 INSTALLATION MANUAL
This manual is intended for users of the PPRODA-CM2050 ceiling mounting bracket. It includes instructions for mounting the PPRODA-CM2050 ceiling mounting bracket to a ceiling.
• This bracket is intended to be used with a specific model of camera.
Do not use it with other models of cameras except for those approved by the dealer or distributor.
• This installation should be performed by a qualified service personnel in conformance to all local codes.
• You may need to reinforce the ceiling. If the ceiling is not strong enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the ceiling as follows:
1 Insert cables from external devices, network and power adapter into base.
2 Mount base to the ceiling by using the provided anchors and screws. Or, mount bracket
1 to the ceiling and then the base to bracket 1 by using the provided anchors and screws.
Hole Ø25~30mm
Base
Screw 4X25, 4EA
Ceiling
84mm (3.31”)
Ø 6.5mm
(0.26”)
Bracket 1
Screw 4X25, 4EA
Base
Hexagon Socket 5X10, 4EA
Ø 30mm (1.18”)
3 Insert cables from external devices, network and power adapter through the ceiling pipe.
4 Assemble the ceiling pipe into the base.
5 Insert cables from external devices, network and power adapter into bracket 2, which is purchased separately.
6 Assemble bracket 2 into the ceiling pipe and fix it by using the screws.
Base
Ceiling Pipe
Screw Set M8X8
(2EA)
Screw Set M8X8, 2EA
Bracket 2 or
Dimensions
308.1 ± 5 (12.13)
Ø 99.5 (3.92)
59.4 (2.34)
79 (3.11)
Unit: mm (inch)
Ver.1.0
