EVONET WM KIT WALL MNT Product Manual
Advertisement
Advertisement
DA-AP2000 INSTALLATION MANUAL
This manual is intended for users of the DA-AP2000 mounting bracket. It includes instructions for mounting the DA-AP2000 mounting bracket to another bracket.
• This bracket is intended to be used with DC-D1xxx series model of cameras. Do not use it with other models of cameras.
• This installation should be performed by a qualified service personnel in conformance to all local codes.
• You may need to reinforce the ceiling. If the ceiling is not strong enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the ceiling as follows:
1 Mount bracket onto another bracket. Refer to user's manual of another bracket for details about mounting this bracket.
Bracket
Connect your camera to the bracket as follows:
2 Screw the bottom cover onto bracket.
Bracket
Bottom
Cover
3 Screw the camera dome cover onto the bottom cover.
4 Turn on power.
Bottom
Cover
Camera
Dome
Cover
Dimensions
20˚
Ø 143.5
±0.2 (5.65±0.01)
Ø 97 ±0.2 (3.82±0.01)
Ø 90 ±0.2 (3.54±0.01)
120˚
A
30.1
(1.19)
Ø 101.1 (3.98)
100˚
Ø 166 (6.54)
Ø 161 (6.34)
Ø 140.6 (5.54)
Ø 134 (5.28)
Ø76.1 (3.00)
20˚
A
3 - M4 TAP (DP 6mm)
Unit: mm (inch)
12.8 (0.50)
2.8 (0.11)
3 - M4 TAP (DP 6mm)
R2
R19
5˚
90˚ A - A
1.3 (0.05)
3 - 6 (0.24)
3 - 6 (0.24)
45˚
Ø 126 (4.96)
Ø 113.1 (4.45)
4 - Ø 4.5 (0.18) Hole
2 - Ø 3 (0.12) Hole
90˚
Ver.1.0

Public link updated
The public link to your chat has been updated.
Advertisement