advertisement
Washing machine
WS..T...
siemens-home.com/welcome
HQ
,QVWUXFWLRQ0DQXDODQG,QVWDOODWLRQ,QVWUXFWLRQV
ens-home.com/welcome
Register your product online
Your new washing machine
You have chosen a Siemens washing machine.
Please take a few minutes to read and become familiar with the advantages of your washing machine.
To meet the high quality demands required by Siemens, every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.
For more information on our products, accessories, replacement parts and services, see our website www.siemenshome.com or contact our after-sales service centres.
If the operating and installation instructions describe different models, any differences will be pointed out at the relevant points in the text.
Display rules
:
Warning!
This combination of symbol and signal word indicates a possibly dangerous situation. Not heeding the warning can cause death or injuries.
Caution!
This signal word indicates a possibly dangerous situation. Not heeding the caution can cause property and/or environmental damage.
Note/tip
Information about the optimum use of the appliance/any other useful information.
1. 2. 3. / a) b) c)
The steps are represented by numbers or letters.
■
/ -
Lists are represented by a small box or a dash.
Read these operating and installation instructions before switching on the washing machine.
2
en
Contents
enInstruction Manual and Installation Instructions
8
Intended use. . . . . . . . . . . . . . . . .4
(
Safety instructions . . . . . . . . . . .5
Electrical safety. . . . . . . . . . . . . . . . . . 5
Risk of injury . . . . . . . . . . . . . . . . . . . . 5
Safety for children. . . . . . . . . . . . . . . . 6
7
Environmental protection . . . . . .7
Packaging/used appliance . . . . . . . . . 7
Tips on economical use . . . . . . . . . . . 7
*
Getting to know the
appliance . . . . . . . . . . . . . . . . . . .9
Washing machine . . . . . . . . . . . . . . . . 9
Control panel . . . . . . . . . . . . . . . . . . 10
Display panel . . . . . . . . . . . . . . . . . . 10
Z
Laundry. . . . . . . . . . . . . . . . . . . .12
Prepare the laundry . . . . . . . . . . . . . 12
Sorting laundry . . . . . . . . . . . . . . . . . 12
Starching . . . . . . . . . . . . . . . . . . . . . 12
Dyeing/bleaching . . . . . . . . . . . . . . . 13
Soaking . . . . . . . . . . . . . . . . . . . . . . 13
C
Detergent . . . . . . . . . . . . . . . . . .13
Correct selection of detergent . . . . . 13
Saving energy and detergent . . . . . . 14
0
Programme default settings . . .14
Temperature . . . . . . . . . . . . . . . . . . . 14
Spin speed . . . . . . . . . . . . . . . . . . . . 15
Finished in-time. . . . . . . . . . . . . . . . . 15
\
Additional programme
settings . . . . . . . . . . . . . . . . . . . .16
speed eco. . . . . . . . . . . . . . . . . . . . . 16
Less iron. . . . . . . . . . . . . . . . . . . . . . 16
Prewash . . . . . . . . . . . . . . . . . . . . . . 16
Water Plus . . . . . . . . . . . . . . . . . . . . 16
Rinse Plus. . . . . . . . . . . . . . . . . . . . . 16
1
Operating the appliance . . . . . . 17
Preparing the washing machine . . . .17
Select programme/
switch on the appliance. . . . . . . . . . .17
Change the programme
default settings . . . . . . . . . . . . . . . . .17
Select additional
programme settings . . . . . . . . . . . . .17
Placing laundry into the drum . . . . . .18
Measure and add detergent
and care products . . . . . . . . . . . . . . .18
Starting the programme . . . . . . . . . .19
Childlock . . . . . . . . . . . . . . . . . . . . .20
Adding/removing laundry . . . . . . . . .20
Changing the programme . . . . . . . . .20
Cancel the programme . . . . . . . . . . .20
Programme end during rinse hold. . .21
Programme end . . . . . . . . . . . . . . . .21
Removing laundry/
switching off the appliance . . . . . . . .21
H
Sensors . . . . . . . . . . . . . . . . . . . 21
Automatic load sensing. . . . . . . . . . .21
Unbalanced load detection system . .21
VoltMonitor . . . . . . . . . . . . . . . . . . . .22
M
Setting the signal . . . . . . . . . . . 22
2
Cleaning and maintenance. . . . 23
Machine housing/control panel . . . . .23
Drum . . . . . . . . . . . . . . . . . . . . . . . . .23
Descaling . . . . . . . . . . . . . . . . . . . . .23
Detergent drawer and housing . . . . .23
Detergent solution pump blocked . . .24
The drain hose at the siphon
is blocked . . . . . . . . . . . . . . . . . . . . .25
Filter in the water supply
is blocked . . . . . . . . . . . . . . . . . . . . .25
3
en
Intended use
3
Faults and what to do
about them . . . . . . . . . . . . . . . . 26
Emergency release . . . . . . . . . . . . . 26
Information on the display panel . . . 27
Faults and what to do about them. . 29
4
After-sales service . . . . . . . . . . 31
J
Technical data . . . . . . . . . . . . . . 31
5
Positioning and connecting. . . 32
Included with the appliance . . . . . . . 32
Safety instructions . . . . . . . . . . . . . . 33
Installation surface. . . . . . . . . . . . . . 33
Installation on a base or
a wooden joist floor . . . . . . . . . . . . . 33
Installation on a platform
with drawer . . . . . . . . . . . . . . . . . . . 33
Installing the appliance
in a kitchenette . . . . . . . . . . . . . . . . 34
Removing the transport locks . . . . . 34
Hose and cable lengths. . . . . . . . . . 35
Water inlet . . . . . . . . . . . . . . . . . . . . 35
Water outlet . . . . . . . . . . . . . . . . . . . 36
Levelling . . . . . . . . . . . . . . . . . . . . . 37
Electrical connection . . . . . . . . . . . . 37
Before washing for the first time . . . 38
Transportation . . . . . . . . . . . . . . . . . 39
■
■
■
■
■
■
■
■
8
Intended use
For private domestic use only.
The washing machine is suitable for washing machine-washable fabrics and hand-washable wool in detergent solution.
To be operated with cold mains water and standard detergents and care products which are suitable for use in front-loading washing machines. Do not use detergents for hand wash.
When measuring the amount of all detergents/additives/care products and cleaning agents, always check the manufacturer's instructions.
The washing machine may be used by children over the age of 8 years old and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge if they
are supervised
or have
been instructed
by a responsible person.
Children must not perform cleaning or maintenance work unsupervised.
Keep children under the age of 3 years away from the washing machine.
This appliance is intended for use up to a maximum height of
4000 metres above sea level.
Keep pets away from the washing machine.
Read the Instruction Manual and
Installation Instructions and all other information supplied with the washing machine and use the machine accordingly.
Retain the documents for subsequent use.
4
(
Safety instructions
Electrical safety
:
Warning
Risk of death!
There is a risk of electric shock if you touch live components.
■
Never touch or hold the
■
■ mains plug with wet hands.
Only pull out the mains cable by the plug and never by the cable, as this could damage it.
The appliance must be grounded.
Electrical connection.
Page 37
Risk of injury
:
Warning
Risk of injury!
■
When the washing machine is lifted by its protruding parts (e.g. the washing machine door), the components may break off
■ and cause injuries.
Do not lift the washing machine by protruding parts.
If you climb on the washing machine, the worktop may break and cause injuries.
Do not climb onto the washing machine.
Safety instructions
en
■
■
If you lean on the washing machine door when it is open, the washing machine may tip over and cause injuries.
Do not lean on the washing machine door when it is open.
Reaching into the drum when it is turning can cause injuries to hands.
Do not reach into the drum when it is turning.
Wait until the drum has stopped turning.
:
Warning
Risk of scalding!
When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water e.g. if hot water is being drained into a wash basin.
Do not reach into the hot detergent solution.
5
en
Safety instructions
Safety for children
:
Warning
Danger of death!
If children play with the washing machine, they may get into lifethreatening situations or injure themselves.
■
Do not leave children
■ unattended near the washing machine.
Do not let children play with the washing machine.
:
Warning
Danger of death!
Children may lock themselves in appliances, putting their lives at risk.
For appliances that have reached the end of their service life:
■
Disconnect the mains plug.
■
■
Cut through the mains cable and remove it, along with plug.
Destroy the lock on the washing machine door.
:
Warning
Risk of suffocation!
Children may become wrapped in packaging/film or packing parts if allowed to play with them, or they may pull them over their heads and suffocate.
Keep packaging, film and packaging parts out of the reach of children.
:
Warning
Risk of poisoning!
Detergents and care products may be poisonous if consumed.
Keep detergents and care products out of the reach of children.
:
Warning
Eye/skin irritation!
Detergents and care products may cause irritation if they come into contact with the eyes or skin.
Keep detergents and care products out of the reach of children.
:
Warning
Risk of injury!
When you wash at high temperatures, the glass in the washing machine door gets hot.
Do not let children touch the hot washing machine door.
6
7
Environmental protection
Packaging/used appliance
)
Dispose of packaging in an environmentally-responsible manner.
This appliance is certified in accordance with the
S.O.1035(E) guidelines on Ewaste (Management and
Handling) Rules 2011 which govern waste electrical and electronic equipment. The guidelines provide a framework for the return and recycling of used appliances.
Note:
This product doesn't contain any of hazardous substances as specified in the
E-waste (Management and
Handling) Rules 2011.
Do’s
■
Hand over the old/discarded electronic equipment only to authorized collection centers for disposal http://www.siemens-home.com/in/
Preserve.html
See also:
Contact No: 180042535287 (toll-free)
E-mail:
Online website: [email protected]
www.ewasteindia.com
■
■
Consult the authorized service center as to whether the Electronic
Equipment can be repaired or not, before discarding
Consult the retailer about appliance take back schemes
Environmental protection
en
Don’ts
■
Don’t dump the discarded Electronic
Equipment in the open or in any land fill site, as this will result in contamination of the soil and the ground water
■
■
■
Don’t dispose of the discarded
Electronic Equipment in household bins or Municipal bins
The product is not meant for re-sale to any unauthorized agencies/scrap dealers
Don't keep any replaced spare part(s) from the product in an exposed area
Tips on economical use
■
■
■
■
Fill the appliance with the maximum amount of laundry for each programme to save energy and water to an optimum.
Overview of programmes
~
Supplementary sheet for the operating and installation instructions.
Wash normally soiled laundry without a prewash.
Save energy and detergent when washing lightly and normally soiled laundry.
The selectable temperatures apply to the care labels on the textiles. The temperatures in the machine may deviate from this so that you get the optimum mix of energy-saving and washing results.
7
en
Environmental protection
■
■
■
Information about the energy consumption
* :
The display provides information about the relative energy consumption in the selected program.
The more indicator lights light up, the higher the program's consumption.
This enables you to compare the consumption levels of the different programs when choosing your program settings and to decide on an energy- and water-saving program setting for the selected program.
Energy-saving mode
: The display panel lighting goes out after a few minutes and the start button flashes.
To activate the lighting, press any button.
Energy-saving mode is not activated if a programme is running.
If the laundry is subsequently dried in a tumble dryer, select the spin speed according to the tumble dryer manufacturer's instructions.
* depending on the model
8
Getting to know the appliance
en
*
Getting to know the appliance
Washing machine
6 7
(
Detergent drawer
0
Controls/display elements
8
Washing machine door with integrated window handle
9S
Open the washing machine door
9T
Close the door
@
Service flap
#
9
en
Getting to know the appliance
Control panel
Control panel depending on the model
(
Programmes
~
Supplementary sheet for the operating and installation instructions.
0
Programme selector
Display panel
8
Display panel for settings and information
Note:
The buttons are sensitive, they only need to be touched gently.
# +
Button
(
Display indicator Description
selectable
Temperature
**
0
'
- 90 °C in °C;
'
= cold selectable
Spin speed
- - - -, 0 - 1200**
0 in rpm; 0 = no spin cycle, draining only;
- - - - = Rinse Stop
8
Finished in-time
* depending on the model
** depending on the selected program, settings and model
10
Getting to know the appliance
en
Button Display indicator
e.g. 2:30
Description
Program duration depends on the program selection in h:min
(hours:minutes)
End time preselection in hours 1 - 24
û
@
(
(
(
(
)**
(
æ
)** s l
)**
, l
Water+)
End of program after ... hours
Additional program settings
speed ecoPerfect
Less iron*
Prewash*
Water Plus*
H
(
Ô
‹
, Rinse+) Rinse Plus*
Button
for starting a program, Interrupting a program, e.g. to add items of laundry or cancelling a program
* depending on the model
** depending on the selected program, settings and model
More information on the display panel
Display indicator
Description
8** kg
Load recommendation
Ò
{ {
...
Energy consumption
*
¼
½
Program progress:
Washing
Rinse
0
End
- - - -
Õ
0
Spin
Program end
Program end during Rinse Stop
Washing machine door
Display indicator
w o
E: - -
0 - 4
Description
Childproof lock
Foam detection
* depending on the model
** depending on the selected program, settings and model
Fault display
Signal setting
|
Tap
"Information on the display panel" on page 27
* depending on the model
** depending on the selected program, settings and model
11
en
Laundry
Z
Laundry
Prepare the laundry
Caution!
Damage to the appliance/fabrics
Foreign objects (e.g. coins, paper-clips, needles, nails) may damage the laundry or components in the washing machine.
Therefore, note the following tips when preparing your laundry:
■
Empty pockets.
■
■
■
■
■
Look out for metal items (paperclips, etc.) and remove them.
Wash delicates in a laundry bag
(tights, underwired bras, etc.).
Close any zips, button up any cover buttons.
Brush sand out of pockets and collars.
Remove curtain fittings or place curtains in a laundry bag.
Sorting laundry
■
■
Sort your laundry according to the care instructions and manufacturer's information on the care labels:
■
Type of fabric/fibre
Colour
Note:
Laundry can discolour or not be cleaned correctly. Wash white and coloured laundry separately.
Wash new bright fabrics separately the first time you wash them.
Soiling
Wash laundry with the same level of soiling together.
■
You can find examples of levels of soiling on
–
Light
: Do not prewash, select the
(speed Perfect)
( setting if necessary
–
Normal
–
Heavy
: Load less laundry, select a programme with prewash
–
Stains
: Remove/pretreat stains while they are fresh. First, dab the stain with soapy water/do not rub. Then wash the items of laundry with the appropriate programme. Stubborn/dried-in stains can sometimes only be removed with several washes.
Symbols on the care labels
The numbers in the symbols indicate the maximum washing temperature which may be used.
–
M
: Suitable for a normal washing process; e.g.
Cottons
programme
–
U
: A gentle washing process is required; e.g.
Easy-Care
programme
–
V
: An especially gentle washing process is required; e.g.
Delicate/Silk
programme
–
W
: Suitable for washing by hand; e.g.
Wool
programme
–
Ž
: Do not wash the laundry in the machine.
Starching
Note:
Laundry must not be treated with fabric softener.
Starching is possible in all wash programmes if liquid starch is used.
Starching with liquid starch is possible in programs such as Rinse and Cottons
12
Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye manufacturer's instructions.
Do
not
use the washing machine to bleach clothes.
Soaking
1.
Pour soaking agent/detergent into compartment
II
in accordance with the manufacturer's instructions.
2.
Select the desired programme.
3.
Press the
‹
button to start the programme.
4.
After approx. ten minutes, press the
‹
button to pause the programme.
5.
After the desired soaking time, press the
‹
button again to continue or change the programme.
Notes
■
Load laundry of the same colour.
■
No additional detergent is required; the soaking solution is used for washing.
Detergent
en
■
■
■
■
■
C
Detergent
Correct selection of detergent
The care label is crucial for selecting the correct detergent, temperature and treatment of the laundry.
Note:
Only use detergents for frontloading washing machines, low suds/ detergent foam.
Standard detergent with optical brighteners
Suitable for boil-washable white laundry made from linen or cotton
Programme: Cottons/ cold - max. 90 °C
Detergent for colours without bleach or optical brighteners
Suitable for coloured laundry made from linen or cotton
Programme: Cottons/ cold - max. 60 °C
Detergent for colours/delicates without optical brighteners
Suitable for coloured laundry made from easy-care fibres, synthetic fibres
Programme: Easy-Care/ cold - max. 60 °C
Detergent for delicates
Suitable for delicate, fine fabrics, silk or viscose
Programme: Delicate/Silk/ cold - max. 40 °C
Detergent for woollens
Suitable for wool
Programme: Wool/ cold - max. 40 °C
13
en
Programme default settings
Saving energy and detergent
For light and normal soiling, you can save energy (lower washing temperature) and detergent.
Saving
Reduced temperature and detergent quantity as per the recommended dosage
Soiling/note
Light
No visible dirt or stains. Clothing has taken on some body odour, e.g.:
■
■
Light summer/sports clothing (worn for a few hours)
T-shirts, shirts, blouses
■
(worn for up to one day)
Guest bed linen and hand towels (used for one day)
Normal
Visible dirt or a few light stains, e.g.:
■
T-shirts, shirts, blouses
■
(sweat soaked, worn a few times)
Towels, bedding (used for up to one week)
0
Programme default settings
The temperature, spin speed and programme duration ("Ready in" time) for all programmes are preset at the factory.
These are displayed in the display panel after selecting the programme.
You can change the default settings.
You can find an overview of all possible program settings on the supplementary sheet for the installation and operating instructions.
Temperature
(°C, °C Temp.)
Setting depending on the model
Depending on what stage the program is in, you can change the set temperature before and at the beginning of the program.
The maximum temperature that can be set depends on the program that has been selected.
Temperature as per the care label and detergent quantity as per the recommended dosage for heavy soiling
Heavy
Dirt and/or stains clearly visible, e.g. tea towels, baby items, work clothing
Note:
When measuring the amount of all detergents/additives/care products and cleaning agents, please always check the manufacturer's instructions and information.
"Measure and add detergent and care products" on page 18
14
Spin speed
(
0
,
0
rpm)
Depending on what stage the program is in, you can change the spin speed (in rpm; revolutions per minute) before and during the program.
Setting 0
: The rinsing water is drained but there is no final spin. The laundry stays wet inside the drum, e.g. for items that should not be spun.
Setting
- - - -: (Rinse Stop) = no final spin. The laundry stays in the water after the final rinse.
You can select "Rinse Stop" to prevent creasing if the laundry will not be taken out of the washing machine immediately after the program has ended.
To continue/end the program
The maximum speed that can be set depends on the model and program that has been selected.
Finished in-time
(
û
,
û
Finish in,
û
Ready in)
Before starting the program
, you can preselect the program end ("Ready in" time) in hourly increments (h = hour) up to a maximum of 24 hours.
To do this:
1.
Select a program.
The program duration is displayed for the selected program, e.g.
2:30
(hours:minutes).
2.
Press the
Finished in-time
button repeatedly until the required number of hours is displayed.
3.
Press the
‹
button.
The door will be locked.
The selected number of hours (e.g.
8 h
) is shown in the display panel and counts down until the wash program starts. The duration of the program is then displayed.
Programme default settings
en
During the timer count-down
, you can change the preselected number of hours as follows:
1.
Press the
‹
button.
2.
Use the
Finished in-time
button to change the number of hours.
3.
Press the
‹
button.
During the timer count-down
, you can add or remove laundry as required:
1.
Press the
‹
button.
2.
Open the door and add or remove laundry.
3.
Close the door.
4.
Press the
‹
button.
Note:
The length of the program is automatically adjusted when the program is running.
Certain factors can affect the program length, e.g.:
■
Program settings,
■
■
■
■
■
Detergent dosage (additional rinse cycles if required due to foaming),
Load size/type of textiles (longer washing for higher load and for textiles which absorb more water),
Imbalances (e. g. due to fitted sheets) are offset with several startups of spin cycles,
Fluctuations in power supply,
Water pressure (infeeding speed).
15
en
Additional programme settings
\
Additional programme settings
You can find an overview of all possible additional settings on the supplementary sheet for the installation and operating instructions.
The settings vary depending on the model.
speed eco
(
(
¦
,
(
speedPerfect,
¦
ecoPerfect)
Button with two possible settings for adapting the selected program:
■
■
speed
(
(
)
Washing in a shorter time while achieving a washing result that is consistent with, but uses more energy than the selected program without the speed setting.
Note:
Do not exceed the maximum load.
eco
(
¦
)
Energy-optimised washing by reducing the temperature while achieving a washing result that is consistent with the selected program without the eco setting.
Press the button to do this. First of all, you can select the
speed
setting. If you press the button again, the
eco
setting is active. The respective symbol is shown in the display when the setting is activated.
If you press the button again, no setting is active.
Less iron
(
æ
) Less iron)
Button depending on the model
Reduces creasing thanks to a special spin sequence followed by fluffing and reduced spin speed.
Note:
The washing's residual moisture is increased.
Prewash
( s
) Prewash)
Button depending on the model
For heavily soiled laundry.
There will be a prewash cycle at a low temperature before the main washing.
Note:
Pour detergent into compartment
I
for the prewash cycle and into compartment
II
for the main washing.
Water Plus
( l
, l
Water+)
Button depending on the model
Higher water level and additional rinse cycle for particularly sensitive skin and/ or for areas with very soft water
Rinse Plus
(
Ô
, Rinse+)
Button depending on the model
Additional rinse cycle, for areas with very soft water or for an even better rinsing result.
16
1
Operating the appliance
Preparing the washing machine
Note:
The washing machine
must be correctly installed
and
connected
.
Also consider
1.
Connect the mains plug.
2.
Turn on the water tap.
3.
Open the door.
4.
Check that the drum is completely drained. Drain if necessary.
Select programme/switch on the appliance
Note:
If you have activated the childproof lock, you must first deactivate it before you can set a program.
Use the program selector to select the required program. The program selector can be rotated in either direction.
The appliance is switched on.
The following
default settings
and program information for the selected program appear in the display panel
■
■
■
Temperature*,
The maximum recommended load and the duration of the program
(alternately)
Energy consumption*.
*depending on the model
Operating the appliance
en
Change the programme default settings
You can use the default settings or change them.
To do this, repeatedly select the corresponding button until the required setting is displayed.
The settings are activated without needing to be confirmed.
They are not saved when the appliance is switched off.
"Programme default settings" on page 14
Overview of programmes
~
Supplementary sheet for the operating and installation instructions.
Select additional programme settings
By selecting additional settings, you can better adapt the washing process to your items of laundry.
The settings can be selected or deselected depending on the programme progress.
The indicator lamp for the button lights up if a setting is active.
The settings are not saved when the appliance is switched off.
"Additional programme settings" on page 16
Overview of programmes
~
Supplementary sheet for the operating and installation instructions.
17
en
Operating the appliance
Placing laundry into the drum
:
Warning
Danger of death!
Items of laundry pretreated with cleaning agents that contain solvents, e.g. stain remover/cleaning solvent, may cause an explosion after being loaded into the washing machine.
Hand-rinse items of laundry thoroughly beforehand.
Notes
■
Mix items of laundry of varying sizes.
Laundry items of different sizes distribute themselves better during the spin cycle. Individual items of laundry may lead to imbalances.
■
Observe the specified maximum load. Overfilling has a negative impact on the washing result and promotes creasing.
1.
Place presorted items of laundry unfolded in the washing drum.
2.
Make sure that no items of laundry are trapped between the washing machine door and the rubber seal, and close the door.
The
‹
button indicator lamp flashes to indicate that the washing program can be started. It is possible to change the
Measure and add detergent and care products
Caution!
Damage to the appliance
Cleaning agents and agents for pretreating laundry (e.g. stain removers, prewash sprays, etc.) may cause damage if they come into contact with the surfaces of the washing machine.
Do not allow these agents to come into contact with the surfaces of the washing machine. If necessary, immediately wipe away spray residue and other residues/ droplets with a damp cloth.
Measuring
■
■
Measure the detergent and care products according to:
■
■
Water hardness; ask your water supply company
The manufacturer's instructions on the packaging
The amount of laundry
Soiling
Filling
:
Warning
Eye/skin irritation!
Detergent and care products may spray out if the detergent drawer is opened while the machine is in operation.
Open the drawer carefully.
Rinse eyes or skin thoroughly if they come into contact with detergent/care products.
If swallowed accidentally, seek medical advice.
Note:
Dilute viscous fabric softener and fabric conditioner with water; this prevents blockages.
18
Pour the detergent and care products into the appropriate compartments:
Measuring aid
A
* For liquid detergent
Compartment
II
Detergent for the main wash, water softener, bleach, stain remover
Compartment i
Fabric softener, starch
Do not exceed the
max
.
Compartment
I
Detergent for prewash
1.
Pull out the detergent drawer as far as possible.
2.
Add detergent and/or care products.
3.
Close the detergent drawer.
Measuring aid* for liquid detergent
*depending on the model
Position the measuring aid for measuring the correct amount of liquid detergent:
1.
Pull out the detergent drawer. Press down the insert and fully remove the drawer.
2.
Slide the measuring aid forwards, fold it down and click it into place.
3.
Reinsert the drawer.
Operating the appliance
en
Note:
Do not use the measuring aid for gel detergents and washing powder, or for programmes with prewash or when
"Ready in" time is selected.
For models without a measuring aid,
pour the liquid detergent into the appropriate dispenser and place it in the drum.
Starting the programme
Press the
‹
button. The indicator lamp lights up and the program starts.
The display panel shows the Ready in time while the program is running or the program duration and the program progress symbols once the wash cycle has started.
Note: Foam detection
If the o
symbol also lights up in the display panel, the washing machine has detected too much foam during the wash cycle and automatically activated additional rinse cycles to remove the foam.
Add less detergent to the next wash cycle with the same load.
If you want to lock the program to prevent it from being inadvertently adjusted, you can select the childproof lock as follows.
19
en
Operating the appliance
Childlock
( w
3 sec.)
You can lock the washing machine to prevent the functions you have set from being changed inadvertently. To do this,
activate the childproof lock when the program has started
.
To
activate/deactivate
, press and hold the
Spin speed
and
Finished in-time
buttons at the same time after the washing program has started. Keep pressing the two buttons for approx. three seconds. The w
symbol appears in the display panel.
■
■ w
lights up: The childproof lock is active.
w
flashes: The childproof lock is active and the program selector has been adjusted. To deactivate the childproof lock, reset the program selector to the initial program. The symbol lights up again.
Note:
To avoid the program to terminate, do not turn the program selector beyond the Off position.
Note:
The childproof lock remains active after the program has ended and the appliance is switched off. You must always deactivate the childproof lock if you want to start a new program.
Adding/removing laundry
Following the start of the program, you can add or remove laundry as required.
Press the
‹
button to do this.
The
‹
button indicator lamp flashes and the machine checks whether it is possible to add laundry.
If the following appears in the display panel:
■
■
The
Õ
symbol disappears: adding laundry is possible.
The
Õ
symbol lights up: it is not possible to add laundry.
To continue the program, press the
button
‹
. The program continues automatically.
Notes
■
Do not leave the door open for too
■ long when adding laundry as water from the laundry may leak out.
For safety reasons, the door remains locked when the water level or
■ temperature is high, or while the drum is turning, and it is not possible to add laundry during this time.
The load display is not active during reloading.
Changing the programme
1.
Press the
‹
button.
2.
Select another program.
3.
Press the
‹
button.The new program starts from the beginning.
Cancel the programme
For programs at high temperature:
1.
Press the
‹
button.
2.
To cool down laundry: Select
Rinse
.
3.
Press the
‹
button.
For programs at low temperature:
1.
Press the
‹
button.
2.
Select
Spin/Drain//Spin/Empty
.
3.
Press the
‹
button.
20
Programme end during rinse hold
- - - -
0
appears in the display panel and the indicator lamp of the
‹
button flashes.
Continue the program by:
■
■
Pressing the
‹
button (the laundry will be drained with the default spin speed setting*) or
Selecting a spin speed or set the program selector to
Spin/Drain//
Spin/Empty
and then pressing the
‹
button.
* depending on the chosen program ->
Overview of programmes
Programme end
End
appears in the display panel and the indicator lamp of the
‹
button is off.
Removing laundry/switching off the appliance
1.
Open the door and remove the laundry.
2.
Turn the program selector to off position. The appliance is switched off.
3.
Turn off the tap.
Note:
Not required for Aqua-Stop models.
Notes
■
Always wait until the program ends,
■ as the appliance could still be locked.
If the display panel goes off at the end of a program, the energy-saving
■
■ mode is active. Press any button to activate the panel.
Do not leave any items of laundry in the drum.They may shrink in the next wash or discolour another item.
Remove any foreign objects from the drum and the rubber seal – risk of rusting.
Sensors
en
■
Wipe the rubber seal dry.
■
Leave the door and detergent drawer open so that any residual water can evaporate.
H
Sensors
Automatic load sensing
The automatic load-sensing function perfectly adapts the water consumption to each programme depending on the type of fabric and the load.
Unbalanced load detection system
The automatic unbalanced load detection system detects imbalances and ensures even distribution of the laundry by repeatedly starting and stopping the drum spinning.
If the laundry is extremely unevenly distributed, the spin speed is reduced or the spin cycle is not performed for safety reasons.
Note:
Place large and small items of laundry evenly in the drum.
"Faults and what to do about them" on page 26
21
en
Setting the signal
VoltMonitor
The automatic voltage control system detects an unacceptable low voltage supply. The colon on the Ready in display is flashing while there is an unacceptable undervoltage supply.
Once the supply voltage is stable again, the colon of the Ready in display lights up (Normal mode).
The detected voltage under-usage is indicated in the further program sequence by all three points lighting up in the display.
M
Setting the signal
You can change the following settings:
■
■
The volume of the information signals (e.g. at the end of the program) and/or
The volume of the button signals.
You will need to activate the setting mode in order to change these settings.
Note:
Voltage under-usages can for example result in program extensions and/or non-satisfactory results.
Activating the setting mode
1.
Select the
Cottons
program at position 1. The washing machine is switched on.
2.
Press the
‹
button and, at the same time, turn the program selector clockwise to position 2. Release the button.
The setting mode is activated and the preset volume for the information signals appears in the display panel.
Changing the volume
■
■
To change the volume of the information signals, use the Finish intime button, while the program selector remains at position 2.
To change the volume of the button signals, rotate the program selector to position 3. Use again the Finish intime button to change the volume.
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
Exiting setting mode
You can now end the process and set the program selector to the off position.
The settings are saved.
22
2
Cleaning and maintenance
:
Warning
Danger of death!
There is a risk of electric shock if you touch live components.
Switch off the appliance and unplug the mains plug.
:
Warning
Risk of poisoning!
Toxic vapours can be produced by cleaning agents that contain solvents, e.g. cleaning solvent.
Do not use cleaning agents that contain solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents, e.g. cleaning solvent, can damage surfaces and components in the machine.
Do not use cleaning agents that contain solvents.
Machine housing/control panel
■
■
■
Wipe the housing and the control panel with a soft, damp cloth.
Remove the detergent residue immediately.
Do not clean with a water jet.
Drum
Use chlorine-free cleaning agents, do not use steel wool.
If there are odours in the washing machine, or to clean the drum, run the
Drum Clean 90 °C
or
Cottons 90 °C
program without laundry. Add washing
Faults and what to do about them" on page 26
Cleaning and maintenance
en
Descaling
Descaling should not be necessary if the detergent is measured out correctly.
However, if it is required, follow the manufacturer's instructions for the descaling agent. Suitable descalers can be obtained via our website or from our after-sales service.
Detergent drawer and housing
If the washing machine contains detergent or fabric softener residues:
1.
Pull out the detergent drawer. Press down the insert and fully remove the drawer.
2.
To remove the insert: Push the insert upwards from below with your finger.
3.
Clean the detergent dispenser tray and insert with water and a brush, and dry it. Clean the inside of the housing as well.
4.
Fit the insert and lock it in place
(push the cylinder onto the guide pin).
5.
Push in the detergent drawer.
Note:
Leave the detergent drawer open so that any residual water can evaporate.
23
en
Cleaning and maintenance
Detergent solution pump blocked
:
Warning
Risk of scalding!
When you wash at high temperatures, the water gets very hot. If you come into contact with the hot water, you may be scalded.
Allow the water to cool down.
After the water has cooled down:
1.
Turn off the water tap so that no more water can flow in and has to be drained via the drain pump.
2.
Switch off the appliance.
3.
Disconnect the mains plug.
4.
Open and remove the service flap.
6.
Carefully unscrew the pump cover, residual water may leak out.
Clean the interior, pump cover thread and pump housing. The impeller in the detergent solution pump must be able to rotate.
Refit the pump cover and screw it on tightly. The handle must be in a vertical position.
7.
Place the service flap back on, lock it into place, and close it.
5.
Take the drain hose out of the retainer.
Remove the sealing cap, allow the water to flow out into a suitable container.
Replace the sealing cap and place the drainage hose in the retainer.
Note:
To prevent unused detergent from flowing straight into the drain during the next wash, pour 1 litre of water (without detergent) into compartment
II
and start the
Spin/
Drain//Spin/Empty
programme. Do the next wash as usual.
24
The drain hose at the siphon is blocked
1.
Switch off the appliance.
2.
Disconnect the mains plug.
3.
Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out.
4.
Clean the drain hose and siphon connecting piece.
Cleaning and maintenance
en
Filter in the water supply is blocked
First, reduce the water pressure in the supply hose:
1.
Turn off the tap.
2.
Select any program (except Spin/
Drain//Spin/Empty).
3.
Press the
‹
button. Allow the program to run for approximately 40 seconds.
4.
Turn the program selector to off position.
5.
Pull out the mains plug.
6.
Clean the filter on the tap:
Disconnect the hose from the tap.
Clean the filter with a small brush.
5.
Reattach the drain hose and secure the connection using the hose clamp.
7.
For standard and Aqua-Secure models, clean the filter on the rear of the appliance:
Remove the hose from the rear of the appliance.
Use pliers to remove the filter and then clean it.
8.
Insert the filter, connect the hose and check for leaks.
25
en
Faults and what to do about them
3
Faults and what to do about them
Emergency release
e.g. in the event of a power outage
Note:
The programme will continue running when the power supply has been restored.
:
Warning
Risk of scalding!
When you are washing at high temperatures, there is a risk of scalding if you come into contact with detergent solution and laundry.
If possible, leave it to cool down.
:
Warning
Risk of injury!
You may injure your hands if you reach into the drum while it is turning.
Do not reach into the drum when it is turning. Wait until the drum has stopped turning.
Caution!
Water damage
Any escaping water may cause water damage. Do not open the washing machine door if water can be seen through the glass.
If the laundry has to be removed, the washing machine door can be opened as follows:
1.
Switch off the appliance.
2.
Disconnect the mains plug.
3.
4.
Pull the emergency release downwards with a tool and release.
The washing machine door can now be opened.
26
Faults and what to do about them
en
Information on the display panel
Display
Õ
lights up
(after program start)
Õ
lights up
(in pause mode)
Cause/Remedy
The door is locked.
Õ
|
|
flashes
flashes
lights up
E:18
■
■
■
■
The water level is too high. It is not possible to add laundry.
The drum is still turning. It is not possible to add laundry.
Note:
If the door lock symbol is off in pause mode, the door is unlocked. It is possible to add laundry
■
■
■
■
Laundry may be caught. Open and close the door again and press the
‹
button.
If necessary, push the door closed or remove some laundry and then push it closed again.
If necessary, switch the appliance off and on again; set the program and make your individual settings; start the program.
No water inlet, turn on the water tap fully
– Supply hose kinked/trapped,
– Clean the filter in the water supply.
– If an additional water filter has been installed (depending on model), check for contaminants and clean if required
~
separate installation and cleaning instruction for water filter.
■
The water pressure is too low.
– Supply hose kinked/trapped,
– Clean the filter in the water supply.
– If an additional water filter has been installed (depending on model), check for contaminants and clean if required
~
separate installation and cleaning instruction for water filter.
Note:
The program is taking longer than usual.
The drain pump is blocked. Clean the drain pump
The drain hose/drain pipe is blocked. Clean the drain hose at the siphon.
27
en
Faults and what to do about them
Display
E:23
E:32 w o
lights up
:
of the 'Ready in' time flashes
.
of the 'Ready in' time lights up
Other displays
Cause/Remedy
There is water in the base trough, the appliance is leaking. Turn off the tap. Call customer services!
(failure will only be detected at machines with Aquas-
top) at program end
Not a fault – the unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed. Distribute small and large items of laundry evenly in the drum. If necessary, start an additional spin program.
The childproof lock is activated – deactivate it.
Too much foam has been detected and an additional wash cycle has been activated. Add less detergent to the next wash cycle with the same load.
Mains voltage is too low. The program will continue after the voltage supply is recovered.
Undervoltage in the wash programme. The programme is extended.
Switch off the appliance, wait for five seconds and then switch it on again. If the display appears again, call customer services.
28
Faults and what to do about them
en
Faults and what to do about them.
Faults
Water is leaking from the machine.
The machine is not filling with water.
Detergent is not being dispensed.
■
■
■
■
■
Cause/Remedy
Attach the drain hose correctly or replace it.
Tighten the screw connection of the drain hose.
■
Have you pressed the
‹
button?
Is the tap turned on?
Could the filter be clogged? Clean the filter.
Note:
If an additional water filter has been installed (depending on model), check for contaminants and clean if required
~
separate installation and cleaning instruction for water filter.
Is the supply hose kinked or trapped?
The door cannot be opened.
The program will not start.
The drum briefly jerks or judders after the program has started.
The water is not draining.
■
Is - - - - selected (Rinse Stop = no final spin)?
■
■
Clean the drain pipe and/or the drain hose.
Not a fault – the water is below the visible area.
Water is not visible in the drum.
The spin result is not satisfactory.
Laundry is wet/too damp.
■
■
■
The safety function is activated.
Note:
For safety reasons, the washing machine door remains locked when the water level or temperature is high (See
~
Cancel the programme
) or while the drum is rotating.
Is - - - - selected (Rinse Stop = no final spin, water level is high)?
Can the door only be opened by the emergency release?
■
■
■
Have you pressed the
‹
or
Finished in-time
button?
Is the door closed?
Is the w
childproof lock activated? Deactivate.
Not a fault – the internal motor test may cause the drum to jerk or judder briefly when the wash program starts.
■
■
■
■
Not a fault – the unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed.
Distribute small and large items of laundry evenly in the drum.
Less iron (depending on the model) selected?
Is the selected speed too low?
You may run the program Spin/Drain to spin the laundry again.
Not a fault – the unbalanced load detection system is adjusting an imbalance.
The spin cycle runs several times.
The program is taking longer than usual.
■
■
■
The water pressure is too low,
|
Not a fault – the unbalanced load detection system is adjusting an imbalance by repeatedly distributing the laundry in case imbalances have been detected.
Not a fault – the foam detection is active – a rinse cycle has been switched on in case foam has been detected.
29
en
Faults and what to do about them
Faults
The length of the program changes during the wash cycle.
■
■
Cause/Remedy
■
■
Not a fault – the program sequence is optimised for the specific washing process according to the load and the type of textiles. This may change the length of the program shown in the display panel.
The water pressure is low - the washing program will take longer as usual
Not a fault – the effect of the care product is not affected.
Clean the insert if necessary.
Residual water in the care-product compartment i
.
Odours in the washing machine.
Depending on the model, run the
Drum Clean
or
Cottons 90 °C
program without laundry.
Add washing powder or a detergent containing bleach.
Note:
To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer. Do not use detergents designed for wool or delicates.
The o
symbol lights up in the display panel.
Foam is leaking from the detergent drawer. Foam is visible in the drum
Loud noises, vibrations and machine "movement" during the spin cycle.
The display panel/indicator lights do not work while the appliance is running.
■
■
■
■
■
■
■
■
■
Have you used too much detergent? Use less detergent in the next wash cycle.
Mix one tablespoon of fabric softener with 1/2 litre of water and pour it into compartment II (not suitable for outdoor clothing, sportswear or items stuffed with down).
Is the appliance aligned? Align the appliance.
Are the appliance's feet fixed? Secure the appliance's feet.
Have the transport locks been removed? Remove the transport locks.
Has there been a power failure?
Have the fuses blown? Reset/replace the fuses.
If the fault occurs repeatedly, call customer services.
End of program reached. Energy-saving mode is activated
There is detergent residue on the laundry.
■
■
Some phosphate-free detergents contain water-insoluble residue.
Select the program
Rinse
or brush the laundry after washing.
If you cannot rectify a fault yourself (after switching the machine off and on again) or a repair is required:
■
Switch off the appliance and pull out the mains plug.
■
Turn off the tap and call customer services.
30
4
After-sales service
If you cannot correct the fault yourself
"Faults and what to do about them" on page 26
sales service.
~
Back page
We will always find an appropriate solution in order to avoid unnecessary visits by engineers.
Please give the after-sales service the product number (E no.) and the production number (FD) of the appliance.
After-sales service
en
J
Technical data
Dimensions:
850 x 600 x 590 mm
(Height x width x depth)
Weight
63-83 kg (depending on model)
Mains connection:
Mains voltage 220-240 V, 50 Hz
Nominal current 10 A
Nominal input 1900-2300 W
Water pressure:
100-1000 kPa (1-10 bar)
(1U
Product number
)'
Production number
You can find this information:
■ on the inside of the washing
■
■ machine door* in the opened service flap* on the rear of the appliance*
*depending on the model
Trust the expertise of the manufacturer.
Contact us for assistance. By doing so, you will ensure that the repairs are carried out by trained service personnel using genuine spare parts.
31
en
Positioning and connecting
5
Positioning and connecting
Included with the appliance
Note:
Check the machine for transport damage. Never use a damaged machine. If you have a complaint, please contact the retailer from whom you purchased the appliance, or our after-sales service.
(
Mains cable
0
Bag:
■
■
■
■
Installation and operating instructions
After-sales service location directory*
Warranty*
Cover caps for openings left after removing the transport locks
■
Wrench*
8
Water drain hose
@
Elbow for securing the water drain hose*
H
Water supply hose on standard/
Aqua-Secure models
P
Water filter*
*depending on the model
In addition,
a hose clamp (24 - 40 mm diameter, available from specialist dealers) is required to connect the water drain hose to a siphon.
Useful tools
■
■
Spirit level for levelling
Wrench with:
– WAF 13 for loosening the transport locks, and
– WAF 17 for aligning the appliance feet
#
+ 3
32
Safety instructions
:
Warning
Risk of injury!
■
The washing machine is very heavy.
■
Be careful when lifting/transporting the washing machine.
When the washing machine is lifted by its protruding parts (e.g. the
■ washing machine door), the components may break off and cause injuries.
Do not lift the washing machine by protruding parts.
If the hose and mains cables are not routed properly, there is a risk of tripping and injury.
Lay hoses and cables in such a way that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in areas exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water supply hose and water drain hose are under high water pressure. To prevent leaks and water damage, you must follow the instructions in this section.
Notes
■
In addition to the safety information
■ listed here, the local water and electricity supplier may have special requirements.
If in doubt, have the appliance connected by a specialist.
Positioning and connecting
en
Installation surface
Note:
The washing machine must be aligned in a stable manner so that it does not move around.
■
The installation surface must be firm
■ and level.
Soft floors/floor coverings are not suitable.
Installation on a base or a wooden joist floor
Caution!
Damage to the appliance
The washing machine may "wander" and tip/topple from the base when spinning.
The feet of the appliance must be secured with holding brackets.
Order no. WMZ 20490,
WZ 20490 WZ 20510, WZ 20520
Note:
On wooden joist floors, install the washing machine:
■
■
In a corner, if possible,
On a water-resistant wooden board
(min. 30 mm thick) which is screwed tightly to the floor.
Installation on a platform with drawer
Platform order no.: WMZ 20490, WZ
20490, WZ 20510, WZ 20520
33
en
Positioning and connecting
Installing the appliance in a kitchenette
:
Warning
Risk of death!
There is a risk of electric shock if you touch live components.
Do not remove the appliance covering plate.
Notes
■
Recess width of 60 cm required.
■
Only install the washing machine underneath a continuous worktop that is securely connected to adjacent cabinets.
Removing the transport locks
Caution!
Damage to the appliance
■
The machine is secured for transportation using transport locks.
■
If the transport locks are not removed, the machine may become damaged when it is operated.
Before using the appliance for the first time, make sure that you completely remove all four transport locks. Keep the locks in a safe place.
To prevent transport damage from occurring if the appliance is moved at a later date, you must refit the transport locks before transporting the appliance.
Note:
Keep the screws and sleeves in a safe place.
1.
Take the hoses out of the holders.
2.
Unscrew and remove all four transport brace screws.
Remove the sleeves. To do this, remove the mains cable from the holders.
3.
Fit the covers. Lock the covers firmly in place by applying pressure to the snap-in hooks.
34
Hose and cable lengths
■
Left-hand connection aFP aFP aFP
■
Right-hand connection aFP aFP aFP
* depending on model
Tip:
The following are available from specialist dealers/the after-sales service:
■
An extension for Aqua-Stop or cold
■ water supply hose (approx. 2.50 m); order no. WMZ2380, WZ10130,
CZ11350, Z7070X0
A longer supply hose (approx.
2.20 m) for standard model
Positioning and connecting
en
Water inlet
:
Warning
Risk of death!
There is a risk of electric shock if you touch live components.
Observe the following when connecting the machine:
Notes
■
Only operate the washing machine
■ using cold mains water.
Do not connect the machine to the mixer tap of an unpressurised hotwater boiler.
■
■
■
Do not use a used supply hose. Only use the supply hose supplied with the machine or one that was purchased from an authorised retailer.
Do not bend, squash, modify or cut through the water supply hose
(otherwise its strength is no longer guaranteed).
Only tighten the screw connections by hand. If the screw connections are tightened too much with a tool
(pliers), the thread may be damaged.
Optimum water pressure in the supply network
At least
100 kPa (1 bar)
Maximum
1000 kPa (10 bar)
When the tap is open, the water flow is at least 8 l/min.
If the water pressure is higher than this, a pressure-reducing valve must be installed.
35
en
Positioning and connecting
Connection
1.
Connect the water supply hose to the water tap (¾" = 26.4 mm) and to the appliance:
– Model:
Standard
– Model:
Aqua Secure
Tip:
Connect also an external water filter between water supply hose and tap. The filter filters dirt particles out of the water.
Water filter must be cleaned regularly to remove contaminants. This will prevent blockages. See also
~ separate installation and cleaning instruction for water filter.
2.
Open the water tap carefully, checking the leak tightness of the connection points. The screw connection is under mains water pressure.
Water outlet
Caution!
Water damage
If the drain hose slips out of the wash basin or the connection point during draining due to high water pressure, any escaping water may cause water damage.
Secure the drain hose so that it cannot slip out.
Note:
Do not kink the water drain hose or put strain on it lengthways.
■
You can lay the water drain hose as follows:
Outlet in a sink
:
Warning
Risk of scalding!
When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water e.g. if hot water is being drained into a wash basin.
Do not reach into the hot water.
Caution!
Damage to the appliance/fabrics
If the end of the drain hose is immersed in the drained water, water may be sucked back into the appliance and may damage the appliance/fabrics.
Make sure that:
– The plug does not block drainage from the sink.
– The end of the drain hose is not immersed in the drained water.
– The water drains away quickly enough.
36
■
Drainage into a siphon
The connection point must be secured using a hose clamp with a diameter of 24-40 mm (available from specialist dealers).
Positioning and connecting
en
3.
Tighten the lock nut against the housing.
In doing so, hold the foot tight and do not adjust its height.
The lock nuts on all four appliance feet must be screwed tightly against the housing.
■
Outlet into a plastic pipe with rubber bushing or into a drainage pit
Levelling
Level the appliance using a spirit level.
Incorrect levelling may result in intense noise, vibrations and "wandering".
1.
Loosen the lock nuts using a wrench, by turning it in a clockwise direction.
2.
Check the alignment of the washing machine with a spirit level, and adjust it if necessary. Change the height by turning the appliance feet.
All four appliance feet must stand firmly on the ground.
Electrical connection
:
Warning
Danger of death!
There is a risk of electric shock if you touch live components.
■
Never touch or hold the mains plug
■
■ with wet hands.
Only pull out the mains cable by the plug and never by the cable, as this could damage it.
Never unplug the mains plug during operation.
Observe the following information and ensure that:
Notes
■
The mains voltage and voltage indicated on the washing machine
(rating plate) are the same.
The connected load and fuse required are specified on the rating
■
■
■
■ plate.
The mains plug fits the socket.
The cable cross-section is adequate.
The mains cable is only replaced by a qualified electrician (if this is necessary). Replacement mains cables are available from the aftersales service.
No multiple plugs/couplings or extension cables are used.
37
en
Positioning and connecting
■
■
■
If an earth-leakage circuit breaker is used, only a type which displays this symbol is used: z
.
Only this symbol guarantees compliance with the currently applicable regulations.
The mains plug can be accessed at all times.
The mains cable is not bent, squashed, modified, cut through, or in contact with heat sources.
Grounding Instructions
:
Warning
Danger of death!
Improper connection of the ground may result in electric shock. Have the appliance checked by a qualified technician or licensed electrician if you are in doubt as to whether the washing machine has been properly grounded.
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a cord that has an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances. To ground the appliance use a 3 pin plug and properly grounded socket of 16 A rating.
Notes
■
Do not modify the plug provided with the appliance. If the plug will not fit into outlet have a properly grounded outlet installed by qualified electrician. Do not cut, remove or
■ bypass the grounding prong on the washing machine power cord plug.
The wiring for the eletrical outlet circuit must be sufficient to meet the appliance requirements. Use of
Ground Fault Circuit Interrupter
(GFCI) is recommended.
38
■
Do not use the machine with an extension box, extension cord, spike busters etc., as this may lead to improper grounding conditions.
Before washing for the first time
The washing machine was thoroughly tested before leaving the factory. To remove any residues from the production and to remove water that may be left over from the test, run the first wash cycle
without
any laundry.
Notes
■
The washing machine
must be
■
correctly installed
and
connected
.
Never use a damaged machine.
Inform customer services.
1.
Check the machine.
2.
Remove the protective foil from the work top and the control panel.
3.
Connect the mains plug.
4.
Turn on the tap.
5.
Close the door (do not load any laundry).
6.
Depending on the model, select
Drum Clean 90 °C
or
Cottons 90 °C
program.
7.
Open the detergent drawer.
8.
Pour approximately 1 litre of water into compartment
II
.
9.
Pour standard detergent into compartment
II
.
Note:
To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer. Do not use detergent designed for wool or delicates.
10.
Close the detergent drawer.
11.
Press the
‹
button.
12.
When the program ends, switch off the appliance.
Your washing machine is now ready to use.
Transportation
e.g. when moving home
Preparatory work:
1.
Turn off the water tap.
2.
Reduce the water pressure in the supply hose.
Maintenance – filter in the water supply
3.
Disconnect the washing machine from the main plug.
4.
Drain the remaining detergent solution.
Maintenance – detergent solution pump blocked
5.
Remove the hoses.
Installing the transport locks:
1.
Remove the covers and keep them in a safe place.
Use a screwdriver if necessary.
Positioning and connecting
en
Before switching on the appliance again:
Notes
■
The transport locks
must
be
■ removed.
"Removing the transport locks" on page 34
To prevent unused detergent from flowing straight into the drain during the next wash: Pour approx. 1 litre of water into compartment
II
and start the
Spin/Drain//Spin/Empty
program.
2.
Insert all four sleeves.
Clip the mains cable securely in the holders. Insert and tighten the screws.
39
Repair order and advice in the event of faults
GB 0344 892 8999 (Calls charged at local or mobile rate.)
IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
You can find the contact information for all countries in the attached after-sales service directory.
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München
GERMANY siemens-home.com
*9001056474*
9001056474
(9507)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement