Draper NEW 36" High Flow Drum Fan Instructions

DRAPER)
Expert
24/36" HIGH EFFICIENCY
DRUM FA
99623/99624
a A Ii ARN
7 oo A pe
E. mo wll Min
A De | CTN CAN 1
Mii \ ® “con
Л
НН : \ y == XX К 7 x Y A 5 y К ‹ Г, a
X
й
и % Ad
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
1. TITLE PAGE
1.1 INTRODUCTION:
USER MANUAL FOR: 24" / 36" High Efficiency Drum Fans
Stock No’s: 99623 / 99624
Part No’s: HV-24/E / HV-36/E
1.2 REVISIONS:
Date first published March 2020.
As our user manuals are continually updated, users should make sure that they use
the very latest version.
Downloads are available from: http://drapertools.com/manuals
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Product Helpline: +44 (0) 23 8049 4344
General Fax: +44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING! — Information that draws attention to the risk of injury or death.
CAUTION! — Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational use
only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any
other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
2. CONTENTS
1. TITLE PAGE
1.1 INTRODUCTION... reece enn 2
1.2 REVISION HISTORY eerie ems 2
1.3 UNDERSTANDING THIS MANUAL .....................eeeeeeeeeeeeeeeiiacear reee. 2
1.4 COPYRIGHT NOTICE ....oe reer eee. 2
2. CONTENTS
2.1 CONTENTS eK RRRRRRRRRRRRERRREEKKRKERKRRMRKKARMARMARKKKKRKKKKKKKKKKKKKKKAKKERKKKKEEREEKKEREEKEEUEEG 3
3. WARRANTY
3.1 \ММАННАМТУ.........нннннннннкннесеннннннннеееенненненнннннннннненннннененнннннннннннннннннненннннннннннннннннннннннннын)х. 4
4. INTRODUCTION
4.1 00 enr aaa eee ea eee e eee eee eee eee eee eee eee eee eee 5
4.2 SPECIFICATION ….......................esssrenaaseeaaaesaaeee area e area eee eee e eee eee eee eee eee ee eee eee 5
4.3 HANDLING & STORAGE .…............…ccccrrrrerereesranses san ae eee e eee e tree rene ner e nanas 5
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE esse 6-7
5.2 ADDITIONAL SAFETY INSTRUCTIONS FOR FANS................eeeee eee n nues 7
5.3 CONNECTION TO THE POWER SUPPL Year eee eee. 7
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION ee EKKKEEKKKKERKKRRKRMMRRARMARKKKKKKKKKKKKKKKKKKKKAKKKREKKKEEKEEKEREEEKKEUEEG 8
7. UNPACKING AND CHECKING
7.1 PACKAGING ..…...............………ccccceceee eee een eee marrer e eee eee eee eee eee eee eee eee eee eee 9
8. FAN INSTRUCTION
8.1 OPERATION AND USE... iii e eee e eee e assesses seman 10
8.2 TO OPERATE.................ccccccceceee eee e ae eaas rene e sea ee area eee eee eee e eee eee eee eee eee eee 10
A eee eee eee eee eee eee eee eee eee 10
9. МАМТЕМАМСЕ.............55ннннннннннннннннннннннннннннннннннненннннннннннннннненененнннннннннннннннннннннннннннннннннннннннннне 11
10. EXPLANATION OF SYMBOLS
10.1 EXPLANATION OF SYMBOLS .................eeeeeeeeeeeeeeniiereeeeeeeeereee enn neeeeeneeeeeeeeeee reee. 12
11. DISPOSAL
11.1 DISPOSAL... ese essere ee ee eee e ea ee eae a ae eeeas 13
DECLARATION OF CONFORMITY .....ooo eerie en ENCLOSED
3. WARRANTY
3.1 WARRANTY
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact:
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or: Product Helpline (023) 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months
from the date of purchase. This guarantee does not apply to normal wear and tear, nor does it
cover any damage caused by misuse, careless or unsafe handling, alterations, accidents, or repairs
attempted or made by any personnel other than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be
quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
4. INTRODUCTION
4.1 SCOPE
High efficiency drum fan for circulating air, ideal for industrial use in and around the office or
workshop with wheels for easy movability.
4.2 SPECIFICATION
STOCK NOS. oie en en assenre nee mme 99623 .........ннненнненнннннннненнннннннне 99624
Part NO'S. ...cooo ieee nEENOOs HV-24/E ..............eeeeenoireeneceneeneneee. HV-36/E
Rated voltage ......................e.....eeiieeeeeeeeear ee een EEE 230V... eee erere 230V
Rated frequency...................e......eeeeeenireeneee eee ena EEEEG BOHZ...............eeeenecccnenereaceceneneoeene———. 50Hz
Rated InpUt er... een 330W EEE 410W
Diameter O ........….…...........ccccrsssrrncecenasserencensasaneanenm0 00 24" Leccnssssranensanaaasennena an asaren cena nan nee 36"
Speed Settings... —————— A 2
Air flow (high) ................=......reeeeeriieene reee eee. 4,017m/H.................eeeeeceeeeeeeceeeeee— 8,070m*/h
Noise level (max).........................rieerreceneeree e eee 87dBA............_..e.eecereoceneonenenoeaeeone. 84dBA
Net Weight... ar ener DT Orr errr eee 40.9kg
4.3 HANDLING & STORAGE
This fan is designed to be moved to different locations. Ensure it is always operated on a firm and
stable surface. Ensure that water and/or cleaning detergent does not enter the motor housing or
switch mechanism.
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE
When using any type of power tool there are steps that should be taken to make sure that you, as
the user, remain safe.
Common sense and a respect for the tool will help reduce the risk of injury.
Read the instruction manual fully. Do not attempt any operation until you have read and
understood this manual. Most important you must know how to safely start and stop this machine,
especially in an emergency.
Keep the work area tidy and clean. Attempting to clear clutter from around the machine during
use will reduce your concentration. Mess on the floor creates a trip hazard. Any liquid spilt on the
floor could result in you slipping.
Find a suitable location. If the machine is bench mounted; the location should provide good
natural light or artificial lighting as a replacement. Avoid damp and dust locations as it will have a
negative effect on the machine’s performance.
If the machine is portable; do not expose the tool to rain. In all cases do not operate power tools
near any flammable materials.
Beware of electric shock. Avoid contact with earthed surfaces; because they can conduct
electricity if there is an electrical fault with the power tool. Always protect the power cable and
route it away from danger.
Keep bystanders away. Children, onlookers and passers by must be restricted from entering the
work area for their own protection. The barrier must extend a suitable distance from the tool user.
Unplug and house all power tools that are not in use. A power tool should never be left
unattended while connected to the power supply. They must be housed in a suitable location,
away locked up and from children.
Do not overload or misuse the tool. All tools are designed for a purpose and are limited to what
they are capable of doing. Do not attempt to use a power tool (or adapt it in any way) for an
application it is not designed for. Select a tool appropriate for the size of the job. Overloading a tool
will result in tool failure and user injury: This covers the use of accessories.
Dress properly. Loose clothing, long hair and jewellery are all dangerous because they can
become entangled in moving machinery: This can also result in parts of body being pulled into the
machine.
Clothing should be close fitted, with any long hair tired back and jewellery and neck ties removed.
Footwear must be fully enclosed and have a nonslip sole.
Move the machine as instructed. If the machine is hand held, do not carry it by the power supply
cable. If the product is heavy; employ a second or third person to help move it safely or use a
mechanical device. Always refer to the instructions for the correct method.
Maintain your tools correctly. A well maintained tool will do the job safely. Replace any damaged
or missing parts immediately with original parts from the manufacturer. As applicable; moving parts
clean, oiled or greased; handles clean; and emergency devices working.
Wait for the machine to stop. Unless the machine is fitted with a safety brake; some parts may
continue to move due to momentum. Wait for all parts to stop; then unplug it from the power
supply before making any adjustments, carrying out maintenance operations or just finishing using
the tool.
Prevent unintentional starting. Before plugging any machine in to the power supply, make sure
the switch is in the OFF position. If the machine is portable; do not hold the machine near the
switch and take care when putting the machine down; that nothing can operate the switch.
5. HEALTH AND SAFETY INFORMATION
Carefully select an extension lead. Some machines are not suitable for use with extension
leads. When using an extended lead, select one capable of handling the current (amps) drawn by
the machine in use. Fully extend the lead regardless of the distance between the power supply
and the tool. Excess current (amps) and a coiled extension lead will both cause the cable to heat
up and can result in fire.
Concentrate and stay alert. Distractions are likely to cause an accident. Never operate a power
tool if you are under the influence of drugs (prescription or otherwise), including alcohol or if you
are feeling tired. Being disorientated will result in an accident.
Have this tool repaired by a qualified person. This tool is designed to conform to the relevant
international and local standards and as such should be maintained and repaired by someone qualified;
using only original parts supplied by the manufacturer: This will ensure the tool remains safe to use.
5.2 ADDITIONAL SAFETY INSTRUCTIONS FOR FANS
Warning: Please read the following instructions carefully, failure to do so could lead to serious
personal injury.
Draper Tools Ltd., recommends that this fan not be modified or used for any application other than
that for which is was designed. If you are unsure of its relative applications, do not hesitate to
contact us in writing and we will advise you.
+ Keep out of the reach of children.
- Ensure fan is situated and used in an area free from loose furnishings, clothing, curtains etc
that could get sucked in to the fan air inlet, or could block the fan blades.
- Do not leave the fan running unattended.
+ Remove the plug from the socket before carrying out adjustment, servicing or maintenance.
- Complete any assembly procedures prior to connection to the power supply.
* Never insert fingers, pencils, or any other object through the protective grille, while the fan is running.
* Disconnect the fan from the power supply when moving it from one location to the other.
* Ensure the fan is switched off from the mains supply before removing the grille.
+ Always complete the assembly of the fan before switching it on after cleaning.
« Always ensure the fan is secure on a firm and secure surface before operating.
* Do not use the fan near an open window, as rain can create an electrical hazard.
- If the power supply cable becomes damaged, it should be replaced immediately.
- If replacement of the supply cord is necessary, this should be carried out by the manufacturer
or appropriate agent in order to avoid a safety hazard.
- Do not use this fan with an independant externally connected speed control device.
- Do not cover when in use.
* Do not use in the immediate surroundings of a bath, shower or swimming pool.
5.3 CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the machine's rating plate are compatible with the
Power supply you intent to connect it to.
This fan comes supplied with a UK standard 3 pin plug. lt is designed for connection to a
Standard power supply rated at 230V AC.
ltis Class | (earthed); is designed for connection to a power supply matching that detailed
on the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this appliance.
Follow all the instructions supplied with the extension lead. If using an extension lead, follow the
instructions that came with your lead regarding maximum load while cable is wound, if in doubt
ensure that the entire cable is unwound. Using a coiled extension lead will generate heat which
could melt the lead and cause a fire.
This product requires an earth connection.
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION
AZ
=
AE
VA
47 y.
Y Xx
LN LAA
аи
№; >
TM
7
7,
AVR
eh
AS
js
|
4
|
7!
/
A
№
M
И
Л
y
Y
fh
An
1
|
/
y
y
Front grille.
Fan blade.
Tubular base. ,
Handle. о ç >
X 8 ae
Switch box. N
Wheels. NN
NO
UN —e
Power lead. fi CET О
Rear grille. I fi 77 a “ad В,
LITT
ET
CTI
99898898
|.
LIT
Si LL
L 2 a FA Ea 1 1] LTT
|
e. pol
ET |
г АТ
far Г] Y
i J
| J и € J y 4
LM
FES
=> > AN 7A
== EZ CA
в НЕ ле
7. UNPACKING AND CHECKING
7.1 PACKAGING
Carefully remove the machine from the packaging and examine it for any sign of damage that may
have happened during shipping. Lay the contents out and check them against the parts shown
below. If any part is damaged or missing; please contact the Draper Helpline (the telephone
number appears on the Title page) and do not attempt to use the machine.
The packaging material should be retained at least during the guarantee period: in case the
machine needs to be returned for repair.
Warning! Some of the packaging materials used may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make sure they are disposed of correctly; according
to local regulations.
8. FAN INSTRUCTION
8.1 OPERATION AND USE
This fan is supplied fully assembled and ready for use.
Always ensure the fan is switched off, ensure mains plug is removed §
and that the fan blade has stopped rotating before moving.
8.2 TO OPERATE
Ensure mains plug is connected to power supply and then turn the
dial to required speed setting.
8.3 TILTING
To adjust the angle and direction, tilt the fan by gently pushing or
pulling on the top of the fan housing.
DO NOT exert excess pressure or damage to the fan may occur.
-10 -
9. MAINTENANCE
==
Always unplug the fan from the power supply before cleaning.
2. All plastic components should be cleaned with a damp cloth. DO NOT spray with
water/cleaning agents or immerse the fan unit in water.
3. Warning: Ensure that any water and/or cleaning detergent DOES NOT enter the motor
housing or switch mechanism.
4. Ensure that the unit is clean, dry and correctly assembled after cleaning and before every use.
- 11 -
10. EXPLANATION OF SYMBOLS
10.1 EXPLANATION OF SYMBOLS
X Do not dispose of WEEE*
unsorted municipal waste.
- 12 -
11. DISPOSAL
11.1 DISPOSAL
— At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is
disposed of according to national regulations.
— Contact your local authority for details of collection schemes in your area.
In all circumstances:
e Do not dispose of power tools with domestic waste.
* Do not incinerate.
e Do not abandon in the environment.
e Do not dispose of WEEE”* as unsorted municipal waste.
* Waste Electrical & Electronic Equipment.
- 13 -
- 14 -
NOTES
- 15 -
CONTACTS
Draper Tools Limited, Hursley Road,
Chandler's Ford, Eastleigh, Hampshire. SO53 1YF. U.K.
Helpline: (023) 8049 4344
Sales Desk: (023) 8049 4333
Internet: drapertools.com
E-mail: salesedrapertools.com
General Enquiries: (023) 8026 6355
Service/Warranty Repair Agent:
For aftersales servicing or warranty repairs, please contact the
Draper Tools Helpline for details of an agent in your local area.
YOUR DRAPER STOCKIST
PJCM0320
©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
">