Televes CoaxData MyNET Wi-Fi Router Ethernet - Coaxial and PLC Router/Media converter User Manual

Add to my manuals
32 Pages

advertisement

Televes CoaxData MyNET Wi-Fi Router Ethernet - Coaxial and PLC Router/Media converter User Manual | Manualzz

EN

Ref.769301

Data Over Coax Gateway

Índice de contenido

Important safety information...................................................................................................................4

Main installation considerations...................................................................................................................4

Safe operation..............................................................................................................................................4

Electric security markings............................................................................................................................4

Introduction............................................................................................................................................4

CoaxDATA™ Home WiFi 1Gbps.................................................................................................................5

Main Specifications......................................................................................................................................5

System requierements ................................................................................................................................6

Package content ........................................................................................................................................7

CoaxData range of products........................................................................................................................8

Getting to know the CoaxDATA™ Home WiFi 1Gbps...........................................................................9

Device connections......................................................................................................................................9

Front & rear pannel LEDs .........................................................................................................................10

Configurando el CoaxData Home WiFi.................................................................................................12

Setting up of the product............................................................................................................................12

Estado del dispositivo................................................................................................................................12

Setting up of the working mode............................................................................................................15

AP Bridge Mode.........................................................................................................................................15

Router Mode..............................................................................................................................................15

LAN interface set up.............................................................................................................................16

WiFi interface set up.............................................................................................................................18

Configuration of the radio interface............................................................................................................18

WiFi Access points configuration...............................................................................................................20

Security configuration od the WiFi network ..............................................................................................20

Advanced configuration of the device...................................................................................................22

Routing tables............................................................................................................................................22

Stting up the time on the system ..............................................................................................................22

Advanced NAT Configuration....................................................................................................................24

Changing the password ............................................................................................................................25

Gestión del dispositivo...............................................................................................................................25

Installing the CoaxData Home WiFi 1Gps...........................................................................................27

Setting up of the Master on the system.....................................................................................................29

Connection of the Master device...............................................................................................................30

Instalation of Ref. 769301 in the TV outlets. ............................................................................................30

Specifications.......................................................................................................................................33

Data Over Coax Gateway Ref.769301

Important safety information

Main installation considerations

 Please read this manual carefully before installing the product.

 To reduce risk of fire or electrical shock do not expose the equipment to rain or dampness.

 Do not remove the product cover while being connected to the mains.

Do not block ventilation holes on the product.

Please allow for some free space around the product to guarantee proper air circulation.

The product should not be exposed to watter splash.

 Do not place the product near heat sources or in a high humidity environment.

 Do not install the equipment in an unstable or vibrating surface where it could face a shock.

Safe operation

 Mains power requirements for this product are: 108-254 V~ 50/60 Hz.

 Should any liquid or object fall inside the product, please refer to a technically qualified service.

 To unplug the product from the mains please pull from the mains plug, never from the electrical cable.

 Do not connect the product to the mains untill all other connections have been made.

 The power socket should be near the equipment and easily accessible.

EN

Electric security markings

CE marking compliance.

Product for indoor use.

Safety requirements for class II electrical products.

Waste management of electric and electronic equipment at the end of their working live.

www.televes.es

Data Over Coax Gateway Ref.769301

Introduction

Data Over Coax Gateway

The

Data Over Coax Gateway

allows the transmission of IP data over coaxial cable and power distribution neworks as well as broadcast TV and other services.It includes a WLAN interface 802.11b/g/n for wireless devices.

The Ethernet-Coaxial-Wifi Router allows the connection of multiple devices through the coaxial and power network without the need of running extra cables and installing Hub's or Ethernet switches.

Ref.769301 Data Over Coax Gateway

includes power supply connector, two F connectors for TV

769301_ DATA, three Ethernet RJ45 100Base-TX/10Base-T an USB connector and a WLAN 802.11bgn

interface.

EN

Main Specifications

 Possibility of connecting a device sharing internet access using the existing infrastructure taking advantage of wireles technology.

 Easy settting up procedure without the need of installing new hardware and/or software drivers.

3xEthernet

(Ref.769301) 100 BASE-TX/10 BASE-T to allow the connection of multiple devices such as PC's, Set to boxes, video game consoles, etc.

 WiFi 802.11bgn interface with 2x2 MIMO in the 2.4GHz band supporting up to 144 Mbps for

20MHz channels and up to 300 Mbps for 40MHz channels.

 Posibility of switching off WiFi or selecting a low power mode interface by means of front panel switch.

WPS

(Wireless protected setup button) feature avoiding the need of password setting.

 Supporting all encryption and authentification WiFi protocols such as WEP, WPA/WPA2, 802.1x

guaranteeing a secure connection.

 Complying with IEEE 1901 specifications and including HomePlug AV PHY supporting

2880 p

OFDM 4096 /

1024/256/64/16/8 QAM, QPSK, BPSK and ROBO mode carriers, capable of up to

700 Mbps

physical throughput and up to

350Mbps

UDP throughput over the coaxial network.

 Working bandwidth on the coaxial network is

2-67,5 MHz

supporting a maximum attenuation of

85 dB

. There is no limit of minimum attenuation. It can support up to 1,2 Km of coaxial cable.

 5 front LED’s show equipment status, Internet access, WiFi status, coaxial network status.

www.televes.es

Data Over Coax Gateway Ref.769301

 Dynamic signal adjustment based on channel conditions and powerful coding algorythm based on

FEC & TCC (turbo convolutional codes) technique allowing communication with just 3dB of SNR.

 Advanced Encryption algorithm (AES-128) guaranteeing secure communications.

 Sharing high speed internet access. Supporting up to 243 slaves in the same distribution network.

No need of Ethernet Hubs or switches.

 Supporting Quality of Service

(QoS)

and including packet classification rules and multiple transmission ques.

Supporting IGMPv3 based multicast streams to implement efficient IPTV solutions. It can handle up to 32 different channels.

 Wide range power supply unit ~108-254Vac 50/60Hz

Robust and compact design in compliance with electrical safety legal requirements (EN 60950-

1:2007/AC:2012), electromagnetic compatibility (EN 55022:2008) , inmunity(EN 55024:2011 ) and radiation over electric power wiring (EN 50412-2-1:2006 ) and electromagnetic spectrum (EN 300

328 V1.7.1, EN 62311:2008).

 Web interface to configure working parameters and network options.

EN

System requierements

Plug and Play system avoiding the need of any additional software or driver.

For installation in

MxU mode and that has a master device

To configure the device a computer is needed with an Ethernet 100BASE-TX or IEEE

802.11bgn WiFI port.

Complete web based software tool and advanced configuration application

CoaxManager™

(basic configuration )/ CoaxManagerPro™ (advanced configuration)

.

This software is available in:

www.televes.com

www.televes.es

Data Over Coax Gateway Ref.769301

Package content

Ref.769301 Data Over Coax Gateway

User guide

75 Ohm Coaxial load

Power cord

EN

CoaxDATA Home

Wifi 1Gbps

Setup guide 75Ohm load

Power cord

www.televes.es

Data Over Coax Gateway Ref.769301

CoaxData range of products

Ref.769301 is a part of a comprehensive range of products:

• Ref.769201 CoaxData™ 1Gbps-HDTV

• Ref.769202 CoaxData™ 1Gbps-HDTV with SFP

• Ref.769203 CoaxData™ 1Gbps-HDTV 1XEth

• Ref.769220 CoaxData™ Diplex filter TV-Data 2-68 Mhz / 87-2150 MHz

• Ref.769210 CoaxData™ SFP 1000 Base-X 2 F.O ethernet adapter.

EN

Ref.769201 CoaxData™

1Gbps HDTV

Ref.769202 CoaxData™

1Gbps HDTV with

SFP

Ref.769203 CoaxData™

1Gbps HDTV 1x Eth

Ref.769210 CoaxData™

SFP Module 1000 Base-X

Ref.769220 CoaxData™ 1Gbps diplex filter TV-Data 2-68 Mhz /

87-2150 MHz

www.televes.es

Data Over Coax Gateway Ref.769301

Getting to know the Data Over Coax Gateway

EN

Device connections

Ethernet ports

3 x RJ-45 ports

IEEE 802.3 100 BASE-TX/10 BASE-T compliant. These ports allow the connection of the CoaxData 1Gbps-HDTV to computers, VOIP telephones, Set Top Boxes, connected TV’s,etc. They support speed autonegotiation and Auto-MDIX for ease and optimal working conditions.

Data input. TV + Data

Female F connector for data and TV input direct from the compatible TV socket.

TV output. TV

Female F connector to access TV channels.

Reset button / factory default configuration

Keeping the button pressed for a period under 5 seconds the device will reboot if the button is pressed for more than 5 seconds it will reload factory configuration.

 Please take into consideration that factory default will delete all configuration done on the equipment.

The configuration of the coaxial interface of the product will not be affected by this button, as this is managed by using the CoaxManager application.

 IP default adress is : 172.16.0.1/Mask: 255.255.255.0

 Default user:

Admin

password:

Televes1

Medium switch

At the back of the device this selects the transmission medium. Coaxial only (right), hybrid (coaxial &

PLC) (left).

 Signal will always be present on the coaxial network.

 The Medium LED on the front panel will bright green (Coaxial mode) or orange (Hybrid mode). www.televes.es

Data Over Coax Gateway Ref.769301

EN

WPS Button

WPS

(Wireless protected setup) allows the easy configuration of a wireless secure connection with other devices supporting the WPS protocol. Simply push the button and activate the WPS function on the wireless device.

The WPS function will be active for 2 minutes, during this period of time the client should stablish a secure connection.

While the WPS mode is active the power LED will blink orange, once the connection has been finalised the WPS mode will stop and should a connection to a different device be needed the WPS button should be pressed again.

WiFi switch

El conmutador WiFi allows three positions and hence WiFi status:

OFF

(left ): radio is off, LED will bright red. .

Low Power

(Center): WiFi radio will be on in low power mode. This mode will reduce exposure to radiation and interference in nearby networks. The maximum radiated power will not exceed

3dBm. In this mode the WiFi LED will bright orange.

Normal

(Right): WiFi radio will be on in normal mode. The maximum radiated power will be of 17 dBm In this mode the WiFi LED will bright green. www.televes.es

Data Over Coax Gateway Ref.769301

Front & rear pannel LEDs

The product has 5 LED’s on its front pannel show different working conditions of the device. Furthermore

3 LED’s on the rear pannel show status and activity of the ethernet ports.

Power LED

This LED shows the status of the device.

Green

: Normal working conditions.

Orange

: Device is booting and loading configuration. The product will use this colour to indicate configuration events such as the activation of the WPS mode.

Red

: Indicates that the device has detected an error while booting.

Internet LED

This LED indicates the status of the connection to the internet.

Green

: The device is connected to the internet.

Red

: The device is not connected to the internet. Verify all connections of the equipment and the correct configuration of the gateway supplied by the ISP.

Orange

: The device has been configured to AP Bridge. In this working mode there is a bridge between the three interfaces Ethernet-Coaxial/PLC-WiFi.

WLAN LED

This LED shows the status of the WiFi network.

Green

: WiFi is On. Maximum output power +17 dB.

Orange

: WiFi is ON in low power mode. Maximum output power is +3 dBm.

Red

: WiFi en OFF.

Medium Coaxial / Hybrid LED

Shows the selected transmission medium on the front pannel switch.

Green

. Coaxial only.

Orange

. Hybrid, Coaxial + PLC. Connection stablished through both coaxial & power line network.

Link status LED

This LED indicates both the quality of the connection and the activity on the coaxial/power line interface.

Green

: Higher quality connection.Optimal performance.

Orange

: Good quality connection.

Red

: Poor quality connection.

Ethernet LED’s

Each back pannel ethernet port has an LED indicating negotiated speed as well as activity on the port.

Each RJ45 port supports speed autonegotiation.

EN

www.televes.es

Data Over Coax Gateway Ref.769301

Setting up the CoaxData Home WiFi

Setting up of the product

The configuration of the device has to be carried out by means of a web browser.

 Connect a device with a web browser to the CoaxData Home Wifi and access the IP adress : http://172.16.0.1

Default user is. Admin and default password is : Televes1.

 Remenber to change these parameters through the configuration options on the Device management section.

 Should you have forgotten Username and / or Password please reset the equipment to factory configuration and reconfigure it.

Device status

Device Information

: Information about firmware and hardware version on the product.

EN

Network Information

:

Shows network information of the device. This information is related to the selected working mode of the product.

AP Bridge mode

: The device will work as an ethernet bridge on the three interfaces

Coaxial/PLC-Ethernet-WiFi.

www.televes.es

Data Over Coax Gateway Ref.769301

Router mode

: In this mode the option shows information related to the conection stablished by the ISP’s router. In this mode there is a WAN interface (Coaxial/PLC) and interfaces for the LAN network Ethernet & WiFi.

Service Mode

: Internet

Connection Name

: 1_INTERNET_R_VID

Default Gateway/Subnet Mask

: IP adress being giben by the ISP’s gateway.

DNS Server

: DNS server being being determined by the Gateway.

EN

Packets counters for the WAN Interface supply information about the activity on this interface.

www.televes.es

Data Over Coax Gateway Ref.769301

User Information:

Information is supplied on the LAN interfaces and status of the WiFi interface, working mode and packets counters.

EN

• For the three ethernet interfaces the assigned IP adress (LAN IP adress) is shown as well as packets counters of each interface port.

www.televes.es

Data Over Coax Gateway Ref.769301

Setting up of the working mode

The working mode hast to be set through the Web interface on the

Network Settings.

The produt has two operation modes deppending on the type of network bein deployed.

AP Bridge Mode

AP Bridge

: This mode brings up a local network where communication between all interfaces is allowed. This type of network is mostly indicated for home use.

IMPORTANT NOTE: In this mode the

CoaxManager application can be used to configure the coaxial/plc interface.

Router Mode

Router

: This is the factory default working mode. Under this mode the device will route between the coaxial/plc (WAN) interface and the

Ethernet / WiFi (LAN) interfaces.

EN

Router mode supports three configuration protocols depending on the type of access to the internet.

DHCP (Authomatic), Static and PPPoE.

DHCP

: This mode sets the configuration of the WAN interface

(coaxial/PLC) through a DHCP server connected to the Master of the network. www.televes.es

Data Over Coax Gateway Ref.769301

Static Configuration:

Allows the manual configuration of the IP parameters of the WAN interface.

IP Address/Subnet Mask

:

Gateway

: IP Adress of the router connected to the Master device.

DNS:

IP Adress of the Domain

Names Server

EN

PPPoE:

Should the authentification protocol be implemented though a

PPPoE (Point to Point Protocol over

Ethernet) protocol.

User

: PPPoE user name

Password

: service password

Connection Trigger

: Indicates whether the connection is stablished on demand or always.

LAN interface set up.

The product includes a LAN interface to stablish connection between the local devices and the internet and to build a bridge between the ethernet ports and the WiFi network.

LAN Settings

: This options configures the IP adress and mask of the LAN.

DHCP Server:

Allows the activation of a DHCP server in the LAN section which will assign adresses dynamically to each device. The range of IP’s and lease time can be also defined.

Restricted IP Address List:

Should a device connected on the LAN need a static IP adress, this can be set by linking it to the MAC adress of the network host in the DHCP server. A typical application for this would be servers, STB’s, etc. www.televes.es

Data Over Coax Gateway Ref.769301

EN

WiFi interface set up

The configuration of this interface hast two different elements: La configuración de la antena WiFi es dividida en dos partes fundamentales

Radio configuration

: In this part the RF parameters of the network can be configured. Operation

Mode, frequency, and bandwidth.

Access point configuration

: In this part the VAP (virtual access points) can be configured. For each network the name and the security should be set.

Configuration of the radio interface

The WiFI interface supports the IEEE 802.11bgn standard.

Enable Radio:

It allows the activation of the WiFi network. This option is controlled by the switch located on the front pannel of the product. www.televes.es

Data Over Coax Gateway Ref.769301

WiFi Mode:

Selects the WiFi mode

Estándar

802.11b

802.11g

802.11ng20

802.11ng40plus

802.11ng40minus

Descripción

802.11 supporting 11Mbps througput

802.11 supporting 54Mbps througput

802.11n supporting 144Mbps, througput with

20Mhz bandwidth channels.

802.11n supporting 300Mbps througput with

40Mhz bandwidth channels.

Channel:

Indicates the channel being used by the WiFi network.Occupied bandwidth deppends on the chosen WiFi mode. There are 13 possible channels.

EN

8

9

10

11

12

13

6

7

4

5

1

2

3

Primary channel

2447

2452

2457

2462

2467

2472

2412

2417

2422

2427

2432

2437

2442

Frequency

(MHz)

1–3

1–4

1–5

2–6

3–7

4–8

5–9

6–10

7–11

8–12

9–13

10–13

11–13

80211ng20

(20Mhz)

Blocks

80211ng40minus

40MHz above

80211ng40minus

40MHz below

5

6

7

2nd ch.

Center Blocks

8

9

10 8

11 9

6

7

3

4

5

1–7

1–8

1–9

2–10

3–11

4–12

5–13

2nd ch.

Center

Not Available

Not Available

Not Available

Not Available

1

2

3

3

4

5

1–7

1–8

1–9

12 10

13 11

Not Available

Not Available

6–13 4 6

7–13 5 7

6

7

8

9

Not Available

Not Available

8 10

9 11

2–10

3–11

4–12

5–13

6–13

7–13

Blocks

Transmission Power:

Shows the RF power of the WiFi network. RF power will be set by the working mode of the WiFi Network. Maximum allowed power for a WiFi network (+17dBm) will not be exceeded. Minimum RF power will be +3dBm.

NOTE

: RF power will be set by the switch on the front pannel of the product. www.televes.es

Data Over Coax Gateway Ref.769301

Channel expansion Mode :

Should any of the 40MHZ bandwidth modes be chosen

(802.11ng40plus, 802.11ng40minus), this mode defines how the bandwidth expansion should be done.

Static:

The bandwidth expansion is done following the channel table.

Dynamic:

The bandwidth expansion is done following an algorthm that identifies adjacent channels to optimize overall performace of the system.

WiFi Access points configuration

Configuration of the access point is done through the definition of one or more VAPS (Virtual access points).

EN

For each of the interfaces it es needed to specify:

New VAP:

Defines a new WiFi VAP.

SSID

: (Service Set Identifier): Identifier (name) of the WiFi network.

Hidden SSID

: If this option is activated every user needs to manually configure the WiFi network which will not be detected through an scann process.

Device Mode:

Operation mode of the equipment.

Root AP:

In this mode the WiFi interface performs as a Master AP, activating the WDS (Wireless distribution System) mode. This mode builds a transparent bridge between the WiFi network and the Ethernet interfaces in Router mode or a bridge WiFi-Ethernet-Coax/PLC in Bridge mode. This is the recommended and factory default mode.

AP

: This mode is similar to the Root AP but with the WDS mode deactivated as this protocol might not be supported by all WiFi enabled devices. In this mode there is no transparent bridge between WiFi devices and the ethernet ports. WiFi user will only have access to the WAN interface.

WDS Station

: This mode allows the product to work as a WiFi client of other WiFi networks. It activates the WDS mode to guarantee connectivity to the Ethernet ports.

Station

: This mode is similar to the WDS Station mode but without a bridge between the

WiFi network and the ethernet ports. www.televes.es

Data Over Coax Gateway Ref.769301

Security configuration of the WiFi network

The device supports four security levels on the WiFi network.

NONE

: WiFi network is open. There is no access restriction.

WEP

: (Wired equivalent privacy), legacy WiFi security protocol with low robustness. Its use is not recommended but for compatibility reasons.

EN

Key Length

: 64-bit or 128-bit WEP key length.

Network Key

: WEP Password, it must have 13 characters for 128 bits or 5 characters for a 64 bit password.

Index

: There are up to four different keys. By selecting the index the desired key for the

VAP can be selected. This allows the change of keys within a list of used keys.

WPA-PSK/WPA2-PSK

(WiFi Protected Access): Wireless protected access. Improved security protocol for WiFi networks. WPA2 is the last version of this protocol.

WPA Passphrase key

: WiFi network password. Default password is: Televes1.

 Encryption method: WPA/WPA2

TKIP

: Encryption method for WPA/WPA2. www.televes.es

Data Over Coax Gateway Ref.769301

AES

: Encryption method for WPA/WPA2. This is the most robust encyption method and the recommended option.

Autentificación WiFi

NONE

WEP 64-bit

WEP 128-bit

WPA/PSK

WPA2/PSK

WPA/AES

WPA2/AES

Security level

No access restriction

VERY LOW

LOW

AVERAGE

AVERAGE

HIGH

HIGH

EN

Advanced configuration of the device

Routing tables

Routing tables allow setting routes based on ranges of IP adresses. For each route a gateway will be defined. There are two ways to set these routing tables:

RIP

(Router Internet Protocol): This protocol allows different routers to exchange their routing tables to establish the optimal route to forward IP packets.

The device can activate RIP in all or some of the interfaces.

Static Router Table

: It is possible to manually set IP routes. Tis routes are defined with the following information:

Destination network

: Defined with a set of an IP Adress and a mask. For example:

10.0.0.1/255.0.0.0.

Gateway:

The router which will forward the traffic to their final destination.The IP Adress of the gateway has to be within the same network range as the device.

www.televes.es

Data Over Coax Gateway Ref.769301

Setting up the time on the system

Time on the system can be set by configuring the NTP (network time protocol) and defining the servers that will set the time. It has to be defined the Time Zone. GMT+0 is the default option.

EN

www.televes.es

Data Over Coax Gateway Ref.769301

Advanced NAT Configuration

When the product is working in Router mode the NAT option will be automatically activated. Should this option not be required, just unselect.

Should the NAT option be activated, the following options will be available:

ALG Configuration

(Application Level Gateway): this option allows the possibility of adding to the firewall advanced parameters so that the selected services will be supported. As an example ,

SIP service will allow an incomming call reaching the IP phone on the LAN even with the firewall activated due to the fact that the VoIP telephone has been identified.This will be done in a transparent mode for the end use without the need of further configuration.

EN

DMZ host

(Demilitarized zone host): In this option a host on the LAN will have all ports open except thoses mentioned on the NAT section (see next option).

Virtual Server (Port Forwarding)

: This option allows the propagation of ports to the LAN. It allows services such as web, ftp servers, etc to be reached from the Internet.

• As an example Port 1234 of the host 172.16.0.11, can be reached through port 1234 of the router.

• Do take into consideration that it is recommended to assign a fixed IP Adress to those services being on the NAT table. The

Restricted IP Address

will be helpful in this case.

www.televes.es

Data Over Coax Gateway Ref.769301

Changing the password

This option allows the change of the username and password to access the web interface of the product.

It is strongly recommended to change de default user and password to increase security of the system.

 Through the save and load configuration options it makes it easier to simplify the configuration of a set of devices on a system.

 The Reset option will load factory default configuration including usename and password: user:

Admin password: Televes1.

EN

www.televes.es

Data Over Coax Gateway Ref.769301

Device Management

EN

Device Restart

: The device will reboot.

Save Configuration

: Saves the actual configuration of the device on a file. This file can be used as backup or to clone this configuration in other devices.

Load Configuration

: Loads the configuration on a device. After the loading has finished, the device will reboot and start with the new parameters.

Firmware upgrade

: This option will load a new firmware to the device. This file can only be supplied by Televes. The upgrade process might take up to 3 minutes and the product should not be powered off during this process as it might face permanent malfunction.

Restore Factory Defaults:

This option will restore the configuration of the product to factory default. It has the same effect as pushung the reset button for over 5 seconds. www.televes.es

Data Over Coax Gateway Ref.769301

Installing the CoaxData Home WiFi 1Gps

The Data Over Coax Gateway is preconfigured as an MxU slave, Coaxial, Mask 3[Coax 7,5-65MHz] to be able perform a plug and play installation. This configuration assumes that there is a Televes mxU

Master (769201, 769202 or 769203) connected to a gateway with internet access. Ref 769301 performs as an slave on the access points of the coaxial network.

EN

www.televes.es

Data Over Coax Gateway Ref.769301

Setting up of the Master on the system

To guarantee the performance of the system it is necessary to install a Master device on the headend. To configure the Master the CoaxManager application has to be used.

EN

Connection of the Master device

The following products are recommended as Master devices

• Ref.769201 CoaxData™ 1Gbps-HDTV

• Ref.769202 CoaxData™ 1Gbps-HDTV with SFP

The Mater device on the headend bulds two connections:

Conection to the Router/Gateway connected to the Internet

: To get acces to the Internet the

Master hast to be connected to the Router/gateway connected to the Internet by means of an

Ethernet cable.

Connection to the coaxial network:

To connect the master to the coaxial network it is recommended the use of a diplex filter to supress the ingress of noise in the return path (2-

67,5MHz). The loss of this filter in the TV distribution band is <1dB. This filter can be installed using coaxial cable leads with F connectors.

www.televes.es

Data Over Coax Gateway Ref.769301

Instalation of Ref. 769301 in the TV outlets.

The following instructions show the recommended steps to connect the Data Over Coax Gateway-HDTV from the TV socket to your computer or wired device. Please note that there is no need for additional hardware or software drivers.

EN

Working mode Master/Slave

: Ref. 769301 is configured to MxSlave mode. Therefore it will automatically connect to the system Master device. Please note that all other devices on the network must be set to MxU Slave mode using the CoaxManager Software.

Connection to a computer:

The Data Over Coax Gateway includes 3 ethernet ports supporting

100/10 Mbps. It supports speed autonegotation and MDI-X avoiding the use of crossover ethernet cables.

• Connect the ethernet cable to the port on your device and to the CoaxData. .

• Verify that the configuration of the LAN card on your device is set to Auto (DHCP).

• Write on the web browser the adress: http:172.16.0.1

. User:

Admin

, password:

Televes1

www.televes.es

Data Over Coax Gateway Ref.769301

You can also access the device through the WiFi network. There are two possibilities to connect to the wireless network:

• Search on the device for WiFi Network with the following name::

CoaxData-DoC-Wifi

.

Default password (WPA2-PSK) is:

Televes1

Connection though WPS

: Should your wireless device support this function, push the

WPS button on the front pannel of the Data Over Coax Gateway and then activate the

WPS mode on your device. Connection should be stablished automatically.

Connection to the coaxial network

:

• Connect using a coaxial cable the TV+Data port on the device to the wall socket. Please note that this wall socket must be return path capable.

If all devices are correctly connected the Coaxial Link Status LED should bright in the master as well as in all slave devices.

EN

Please take into consideration the default configuration of your Data Over Coax Gateway:

Default IP adress http://172.16.0.1

.

Default access parameters: user:

Admin

, password:

Televes1

 Default SSID of the WiFi network is

CoaxData-DoC-Wifi.

Default password (WPA2-PSK) is:

Televes1

Do not forget the requirements of your coaxial network that will guarantee maximum performance of the system:

 All elements on the coaxial network must support the return path band

2-67,5MHz

. This applies for taps, splitters, line amplifiers and TV sockets.

 Maximum supported attenuation in the return path band

2-67,5MHz

.

is

85 dB.

 The CoaxManager application includes a tool to evaluate the performance of the coaxial network.

www.televes.es

Data Over Coax Gateway Ref.769301

Specifications

WiFi Interface

WiFi 802.11bgn

with 2x2 MIMO.

Maximum througput 144Mbps for a 20MHz Channel and 300Mbps for a 40MHz channel within 802.11n

WiFi power selection

by means of a front pannel switch. Three positions, NORMAL, LOW POWER,

OFF.

Maximum transmission power 17dBm in normal mode. 3 dBm in low power mode.

WPS Button

(Wireless protected setup) for ease of connection.

WiFi Security

WEP, WPA/WPA2 & 802.1x

Coaxial/PLC Interface

Coaxial/PLC to ethernet adapter.

Supports HomeNetworking and MDU/MTU modes.

Up to 253 devices

per Master in MDU/MTU mode.

Protocol supports up to 4 Masters sharing the same return path band with up 1012 devices.

Frequency range :

2-67,5MHz

TV Frequency range:

87-2150MHz

Maximum attenuation:

85 dB

Output Level:

130 dbµV

Spectrum power density: –50dBm/Hz

Minimum spectral power density: -135dBm/Hz

Temperature range: -5ºC a 45ºC

Coverage

Coaxial Cable:

1.2Km

PowerLine: 3

00 m

Information LED’s

Power LED: Power, active, booting & firmware error.

Internet LED: Access to the Internet. Bridge mode.No network .

WiFi LED: Normal Power, Low Power, OFF.

Medium LED: Coax/Hybrid(Coax-PLC)

Link LED: Link & activity indicator on Coax-PLC

100/10Mbps: Link & activity indicator on Ethernet

Modulation & Channel coding

Wi-Fi DSSS (IEEE 802.11b) Wi-Fi OFDM (IEEE

802.11 g, n)

Dynamic channel adaptation

to transmission conditions both in the coax & PLC medium.

Syncrhronization to power as condiciones del canal coaxial y frequency 50/60 Hz.

OFDM

2880 carriers

, QAM 4096/1024/256/

64/16/8, QPSK, BPS

K & ROBO mode.

FEC

(forward error correction) &

TCC

(Turbo

Convolutional Codes) error recovery.

Range

Coax Cable:

1.2Km

PowerLine: 3

00 m

Protocols

Multicast. QoS. IGMP snooping. MLDv2/IGMPv3/

IGMPv2.

Four priorization queues.

VLAN IEEE 802.1p based priorization

Type of service (ToS) & Cos (Class of Service)

Classification based on origin / destination MAC.

Classification based on origin / destination Ip

Adress.

More filters / classification protocols.

EN

Power supply

108V-254V~ 50/60Hz

Power consmuption: 6 Watts Max

Working modes

HomeNetworking

: Asyncronous mode based on low lattency CSMA/CA.

MxU

: Syncronous mode token based (Hidden Node) syncronizing slaves and supporting long range.

Security

WiFi authentification including WEP, WPA/WPA2 y

802.1x.

Private network security based on

NPW

(Network

Password key).

AES-128 Encryption (

NEK

, Network Encrytion key).

Configuration protection by means of

NVAK

(Non-

Volatile Access key).

Connectors

EURO Power jack

2 x “F” 75 Ohm connectors. Low pass filter for DATA

(2-67,5Mhz) & high pass filter for TV services.

(87Mhz-2150Mhz).

3 x RJ45 Ethernet 100/10Mbps.Auto MDI/MDIX.

Norms

EN 60950-1:2007/AC:2012:

Product safety

EN 55022:2008

Electromagnetic interference

EN 55024:2011

Inmunity

EN 50412-2-1:2006

Inmunity requirements in low power networks for power line communications.

EN 300 328 V1.7.1

,

EN 62311:2008:

Radiation norm in the 2.4 Ghz band. www.televes.es

Televes

®

EN

www.televes.es

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement