Toshiba 37RV625D Owner Manual

Add to My manuals
50 Pages

advertisement

Toshiba 37RV625D Owner Manual | Manualzz

00GB_RV635D_Euro.book Page 1 Wednesday, July 8, 2009 9:43 AM

AV6**D Digital

Series

RV6**D Digital

Series

00GB_RV635D_Euro.book Page 2 Wednesday, July 8, 2009 9:43 AM

Contents

INSTALLING YOUR TV

Safety Precautions ..................................................4

Installation and important information ....................5

The remote control .................................................6

Inserting batteries and effective range of the remote ..........................................................6

CONNECTING YOUR TV

Connecting external equipment ..............................7

Connecting an HDMI™ or DVI device to the HDMI input ...................................................................8

To connect an HDMI device ..............................8

To connect a DVI device ...................................8

Connecting a computer ..........................................9

To connect a PC to the RGB/PC terminal ..........9

To connect a PC to the HDMI terminal ..............9

Controls and input connections .............................10

Switching on ..................................................10

Using the remote control ...............................10

Using the controls and connections ................10

SETTING UP YOUR TV

Startup Application ...............................................11

Quick Setup ...................................................11

Ant/Cable In (if available) ..............................12

Auto Tuning ...................................................13

ATV Manual Tuning ..............................................13

Tuning ...........................................................13

Skip ...............................................................15

Sorting positions ............................................15

DTV Manual Tuning ..............................................16

Manual Tuning ..............................................16

Manual Tuning for DVB-C ..............................16

DTV Settings .........................................................16

Channels .......................................................16

Auto Channel Update ....................................17

DVB Character Set .........................................17

Analogue switch-off .....................................17

Location setting .............................................17

CONTROLS AND FEATURES

General controls ...................................................18

Selecting positions .........................................18

The Time Display – analogue only ................18

Stereo and Bilingual transmissions .................18

Quick Menu ...................................................18

2

Sound controls ..................................................... 19

Volume controls and mute sound ................... 19

Dual ............................................................. 19

Bass, Treble and Balance ............................... 19

Advanced Sound Settings .............................. 19

Stable Sound

®

............................................... 19

Dynamic Range Control ................................. 19

Audio Level Offset ......................................... 20

Headphone Settings ...................................... 20

Audio description .......................................... 20

Widescreen viewing ............................................. 21

Picture controls .................................................... 23

Picture Position .............................................. 23

Picture Mode ................................................. 23

Picture preferences ........................................ 23

Reset ............................................................. 24

3D Colour Management ................................ 24

Base Colour Adjustment ................................ 24

Colour Temperature ...................................... 24

Auto Brightness Senser Settings ..................... 25

Active Backlight Control ................................. 25

Black/White Level .......................................... 25

Static Gamma ............................................... 25

MPEG NR – Noise Reduction .......................... 25

DNR – Digital Noise Reduction ....................... 25

Resolution+ .................................................. 26

Cinema Mode ............................................... 26

Expert Mode .................................................. 26

Resetting the advanced picture settings .......... 26

Control Visualization ..................................... 27

Automatic Format (Widescreen) ..................... 27

4:3 Stretch .................................................... 27

Blue Screen ................................................... 27

Side panel adjustment ................................... 27

Picture still ..................................................... 27

Enjoying Photo through USB port .......................... 28

To open Photo Viewer ................................... 28

Viewing photo files ........................................ 29

Other features ..................................................... 30

Panel lock ..................................................... 30

TOSHIBA Illumination .................................... 30

The timers ............................................................ 30

Programme Timers – digital only .................. 30

On Timer ...................................................... 31

Sleep Timer ................................................... 31

Digital on-screen information and

Programme Guide ............................................. 32

Information ................................................... 32

Guide ........................................................... 33

Genre selection/searching ............................. 33

00GB_RV635D_Euro.book Page 3 Wednesday, July 8, 2009 9:43 AM

Digital settings – parental control ........................34

Setting the PIN ..............................................34

Parental Setup ...............................................34

Digital settings – Channel Options .......................35

Selecting favourite channels ...........................35

Favourite Channel Lists ..................................35

Skip channels ................................................35

Locking channels ...........................................35

Digital settings – other settings .............................36

Subtitles ........................................................36

Audio languages ...........................................36

Common Interface .........................................36

Software Upgrade ................................................37

Auto Upgrade ................................................37

Searching for New Software ...........................37

System Information and Reset TV ..........................37

System Information ........................................37

Reset TV ........................................................37

PC Settings ...........................................................38

Horizontal and Vertical Position .....................38

Clock Phase ...................................................38

Sampling Clock .............................................38

Reset .............................................................38

Input selection and AV connections .......................39

Input selection ...............................................39

External input skip .........................................39

INPUT signal selection ...................................39

PC Audio .......................................................39

HDMI 1 Audio ...............................................40

HDMI Settings ...............................................40

Digital Audio Output ......................................40

TEXT SERVICES

Text services .........................................................41

Selecting modes ............................................41

Text information ............................................41

Navigating pages using Auto .........................41

Navigating pages using LIST ..........................41

Control buttons ..............................................42

PROBLEM SOLVING

Questions and Answers ......................................43

INFORMATION

Notes ...................................................................46

Information ..........................................................48

Specifications and accessories ...............................50

3

00GB_RV635D_Euro.book Page 4 Wednesday, July 8, 2009 9:43 AM

INSTALLING YOUR TV

Safety Precautions

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.

Air Circulation

Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television.

Dusty places should also be avoided.

Heat Damage

Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C

(41°F) min. and 35°C (94°F) max.

Mains Supply

The mains supply required for this equipment is 220-

240v AC 50/60Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. Use only the supplied lead.

DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance.

IF IN DOUBT PLEASE CONSULT A COMPETENT

ELECTRICIAN.

Do

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions.

Switch off and withdraw the mains plug before making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DO NOT REMOVE ANY FIXED COVERS AS THIS WILL

EXPOSE DANGEROUS AND 'LIVE' PARTS.

THE MAINS PLUG IS USED AS A DISCONNECTING

DEVICE AND THEREFORE SHOULD BE READILY

OPERABLE.

Do not

DO NOT obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.

DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.

DO NOT use makeshift stands and NEVER fix legs with wood screws. To ensure complete safety, always fit the manufacturers’ approved stand, bracket or legs with the fixings provided according to the instructions.

DO NOT leave equipment switched on when it is unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, make sure your family know how to do this. Special arrangements may need to be made for people with disabilities.

DO NOT continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.

WARNING – excessive sound pressure from earphones or headphones can cause hearing loss.

ABOVE ALL – NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the case.

NEVER guess or take chances with electrical equipment of any kind – it is better to be safe than sorry.

4

00GB_RV635D_Euro.book Page 5 Wednesday, July 8, 2009 9:43 AM

INSTALLING YOUR TV

Installation and important information

Where to install

Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.

Place the TV on a stable, level surface that can support the weight of the TV. As an additional safety measure you can secure the TV to the level surface or a wall, as shown in the illustration, using a sturdy strap.

Side View

‘P’ Clip

Fixing strap

Top View

Stand clip

The LCD display panels are manufactured using an extremely high level of precision technology, however sometimes some parts of the screen may be missing

‘P’ Clip picture elements or have luminous spots. This is not a sign of a malfunction.

‘P’ Clip

Sturdy tie

(as short as possible)

Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will

Fixing strap break or damage the screen, and that small items cannot be inserted into slots or openings in the case.

Cleaning the screen and cabinet…

Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.

Please take note

The digital reception function of this television is only effective in the countries listed in the “COUNTRY” section of the “SETUP” menu. Depending on country/area, some of this television's functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on screen menus, etc. are left on the television screen for any length of time they could become conspicuous, it is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines, this is not a defect of the LCD TV and is not covered under the manufacturers warranty. Regular use of other size modes (eg: Superlive) and varying the “side panel” brightness (if available on the model) will prevent permanent retention.

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by: i) fire; ii) earthquake; iii) accidental damage; iv) intentional misuse of the product; v) use of the product in improper conditions; vi) loss and/or damage caused to the product whilst in the possession of a third party; vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual; viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.

5

00GB_RV635D_Euro.book Page 6 Wednesday, July 8, 2009 9:43 AM

INSTALLING YOUR TV

The remote control

Simple at-a-glance reference of your remote control.

2

3

4

7

1

5

6

10 To alter the TV volume

11 To mute the TV sound

12 In TV mode: To change programme positions

In Text mode: To change text pages

13 In TV mode: To display on-screen information

In Text mode: To access index page in Text mode

14 To access Quick Menu

15 To display the digital on-screen Programme Guide

16 To exit menus

17 When using menus the arrows move the cursor on the screen up, down, left or right. Q to confirm your selection

18 To display the on-screen menu

19 To return to the previous menu

20 Text control buttons

21 When in Text mode:

A

B

C

D

To reveal concealed text

To hold a wanted page

To enlarge text display size

To select a page whilst viewing a normal picture

When in TV mode:

D Analogue time display

8

10

11

15

17

18

9

13

12

14

16

19

20

21

1 For On/Standby mode

2 To select external input sources

3 Picture still

4 To call up text services

5 Stereo/bilingual transmissions

6 Digital Subtitles or Analogue TEXT Subtitle pages if available

7 Number buttons

8 Switch the Audio Description On/Off

9 To switch between ATV (analogue television) and DTV (DTV

TV/DTV RADIO/DTV TEXT if available)

Inserting batteries and effective range of the remote

Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.

Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment.

Dispose of them in accordance with instructions on page 46 of this manual. Warning: batteries must not be exposed to excessive heat such as sunshine, fire or the like.

The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced the batteries may need replacing.

6

00GB_RV635D_Euro.book Page 7 Wednesday, July 8, 2009 9:43 AM

CONNECTING YOUR TV

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.

Illustration represents 32RV635D.

OPTICAL DIGITAL AUDIO OUTPUT

HDMI™ INPUT

SOCKETS

COMPONENT VIDEO INPUT (EXT 3)

SCART 2 (EXT 2)

SCART 1 (EXT 1)

*a decoder could be Digital Satellite or any other compatible decoder.

Antenna/Cable decoder* media recorder

POWER switch

FIXING STRAP

RS-232C port (for service use only)

Aerial cables: - - - - - - - - - - - - - - - - - - - - - -

Connect the aerial to the socket on the rear of the television.

If you use a decoder* and/or a media recorder it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television.

SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the video recorder IN / OUT socket to the television.

Connect the decoder TV socket to the television. Connect the media recorder SAT socket to the decoder MEDIA REC . socket.

Before running Auto Tuning , put your decoder and media recorder to Standby .

The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.

The Digital Audio Output socket enables the connection of a suitable surround sound system. NOTE: this output is always active .

HDMI™ (High-Definition Multimedia Interface) is for use with a DVD decoder or electrical equipment with digital audio and video output.

For acceptable video or PC signal formats through the HDMI terminals, see page 49.

NOTE: Although this television is able to connect to HDMI equipment it is possible that some equipment may not operate correctly.

A wide variety of external equipment can be connected to the back of the television; therefore, the relevant owners manuals for all additional equipment must be referred to for exact instructions.

We recommend SCART 1 for a decoder and SCART 2 for a media recorder.

If connecting S-VIDEO equipment, set the INPUT for EXT 2 .

See page 39 .

If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press o to select between DTV , EXT 1 , EXT 2 , EXT 3 ,

HDMI 1 , HDMI 2 , HDMI 3 , HDMI 4 , PC or ATV .

If r

button is pressed while viewing DTV mode, the picture on your screen and the SCART output will become a still picture.

When the external input mode is selected while viewing DTV mode, the SCART socket does not output video/audio signals.

The SCART output will also be muted in EPG mode.

7

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

HDMI, the HDMI logo, and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing, LLC.

INSTAPORT™ and INSTAPORT logo are trademarks of Silicon Image, Inc. in the United States and other countries.

00GB_RV635D_Euro.book Page 8 Wednesday, July 8, 2009 9:43 AM

CONNECTING YOUR TV

Connecting an HDMI™ or DVI device to the HDMI input

The HDMI input on your television receives digital audio and uncompressed digital video from an

HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth

Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant

[1]

consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 49.

NOTE:

• Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of a new standard.

Please unplug your HDMI cable first and then try setting the following options ( Lip Sync, INSTAPORT™ ) to “ Off ”. Your early HDMI source should operate properly with your television. See page 40.

• Supported Audio format: Linear PCM, sampling rate 32/

44.1/48kHz.

To connect a DVI device

Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1 terminal and audio cables to the PC/

HDMI1 (AUDIO) socket (see illustration).

• The recommended HDMI-to-DVI adapter cable length is 6.6 ft (2m).

• An HDMI-to-DVI adapter cable transfers video only.

Separate analogue audio cables are required.

• See “HDMI 1 Audio” on page 40.

To connect an HDMI device

Connect an HDMI cable (type A connector) to the HDMI terminal.

For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ).

• If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this mode.

• HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).

• See “HDMI 1 Audio” on page 40.

The HDMI 4 terminal is located on the side of the television.

Audio cable for HDMI to television connection

(not supplied)

HDMI-to- DVI adapter Cable

DVI device

VIDEO AUDIO

L R

IN

DVI / HDCP

OUT

R

OUT

L

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

• When turning on your electronic components, turn on the television first, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the

HDMI or DVI device first, and then the television.

HDMI cable

HDMI device

VIDEO AUDIO

L R

IN

HDMI OUT

OUT

L R

To view the HDMI device video, press the o button to select

HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.

8

[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the television.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

00GB_RV635D_Euro.book Page 9 Wednesday, July 8, 2009 9:43 AM

CONNECTING YOUR TV

Connecting a computer

With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the televisions speakers.

To connect a PC to the RGB/PC terminal

When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable and a PC audio cable for the PC/HDMI1 (AUDIO) socket. Select PC from the PC/HDMI 1 Audio options in the AV Connection menu located in the SETUP menu.

the back of your television

• When PC input mode is selected some of the television’s features will be unavailable e.g. Manual Settings in the

SETUP menu, Colour , Tint , Sharpness and Black/White

Level in the PICTURE menu.

• If connecting a certain PC model with a unique PC signal, the

PC signal may not be detected correctly.

To connect a PC to the HDMI terminal

When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cable and an analogue audio cable.

If connecting a PC with an HDMI terminal, use an HDMI cable

(type A connector). A separate analogue cable is not necessary

(see page 8).

the back of your television

Mini D-sub

15 pin connector

Computer

Audio cable for PC to television connection

(not supplied)

Computer

RGB PC cable

(not supplied)

HDMI-to-DVI adapter cable

Audio cable for PC to television connection

(not supplied)

Conversion adaptor if required

(not supplied)

To use a PC, set the monitor output resolution on the PC before connecting it to the television. For acceptable PC signal formats, see page 48.

To display the optimum picture, use the PC setting feature (see page 38).

NOTE:

• The PC audio input terminal on the television is shared with the HDMI 1 analogue audio input terminal (see page 39).

• Some PC models cannot be connected to this television.

• An adapter is not needed for computers with a compatible mini D-sub15-pin terminal.

• Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multiangle scenes.

• A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction.

For acceptable PC and video signal formats, see page 49.

NOTE:

• The edges of the images may be hidden.

• If connecting a certain PC model with a unique PC signal, the

PC signal may not be detected correctly.

9

00GB_RV635D_Euro.book Page 10 Wednesday, July 8, 2009 9:43 AM

CONNECTING YOUR TV

Controls and input connections

A wide variety of external equipment can be connected to the input sockets on the side of the television.

Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions .

Standby

Illustration represents 32RV635D.

COMMON INTERFACE

The Common Interface is for a

Conditional Access Module

(CAM).

Contact a service provider.

POWER switch

USB port

To access photo files

HDMI 4 INPUT

(Not available on all models.)

Input 3 (side) will take priority over

EXT 3 (back) if both connections are used at the same time.

ORANGE LED - Programme timer set ( digital only)

RED LED – Programme timer Active ( digital only)

GREEN LED – On Timer set

RED LED – Standby

GREEN LED – Power on

INPUT 3

(EXT 3)

Switching on

If the RED LED is unlit, check that the mains plug is connected to the power supply and press the !

(POWER) button on the left side of the television to switch the television on. If the picture does not appear, press 1 on the remote control, it may take a few moments. The GREEN LED will be lit.

To put the television into Standby, press 1 on the remote control. To view the television, press 1 again. The picture may take a few seconds to appear.

Using the remote control

Press MENU on the remote control to see the menus.

The menu appears as a list of five topics. As each symbol is selected by pressing C or c on the navigation ring on the remote control, its respective options will appear below.

NOTE: The same menu is displayed in DTV (Digital TV) and

ATV (Analogue TV) modes; however, some items are greyed out in each case.

To use the options, press B and b on the remote control to move up and down through them and Q , and then, press C or c to select the required choice. Follow the on-screen instructions. The functions of each menu are described in detail throughout the manual.

10

Using the controls and connections

To alter the volume press – 2 +.

To alter the programme position press b p B .

Press MENU and I , i , U or u to control the sound and picture options.

Press MENU to finish.

An S-video cable provides better picture performance than a composite video cable. If you connect an S-video cable to

EXT 3 , be sure to disconnect the standard (composite) video cable or the picture performance will be unacceptable.

To select an external input, press o until the appropriate input source is selected as described on page 39 .

Please always refer to the owner’s manual of the equipment to be connected for full details.

NOTE: Interactive video games that involve shooting a "gun" type of joystick at an on-screen target may not work with this

TV.

00GB_RV635D_Euro.book Page 11 Wednesday, July 8, 2009 9:43 AM

SETTING UP YOUR TV

Startup Application

Before switching on the television, put your decoder and media recorder, if applicable, to Standby .

To set up the television use the buttons on the remote control as detailed on page 6.

Quick Setup

a

Press the 1 button. The Quick Setup screen will appear. This screen will appear the first time that the television is switched on and each time Reset TV is selected.

Quick Setup

Menu Language

Country

Primary Subtitle Language

Secondary Subtitle Language

Primary Audio Language

Secondary Audio Language

English

Germany

English

English

English

English b

Highlight Menu Language and press C or c to select the menu language.

c

Press b to highlight Country and C or c to select. The television will now tune the stations for your country.

d

Press

Q

, the Location screen will appear.

Location

To use the TV for displaying in a store showroom, please select [Store]. [Home] mode is recommended for normal use.

Store e

Press C or c to select Store or Home . For normal home use, select Home .

If the Home option is selected the AutoView option will be activated, allowing the TV to automatically adjust the picture setting based on the user’s individual viewing environment. In most cases this will result in the TV operating with lower energy consumption.

f

Press

Q

. If the Ant/Cable In screen appears, press

C or c to select Antenna or Cable .

Ant/Cable In

Antenna g

Press

Q

, the Auto Tuning start up screen will appear with the option to select between DTV and ATV , DTV or ATV if available. Use C or c to select the appropriate mode.

11 h

Press b or B to highlight Start Scan , then press

Q

.

Auto Tuning

Tuning Mode

Start Scan

DTV and ATV

NOTE: If Cable is selected in step 6, additional setting options appear in the Auto Tuning screen. See “Ant/

Cable In“ section.

The television will start to search for available DTV and/or ATV channels. The progress bar will indicate the scan status.

You must allow the television to complete the search.

Auto Tuning

Progress

DTV Tune

ATV Tune

3%

Waiting...

Channel: C7

Found

2

When the search is complete the television will automatically select position one.

The Auto Tuning screen will display the total number of services found.

i

Press C or c to view the DTV (digital channel) or ATV

(analogue channel) lists.

j

Use b or B to move through the list to select a channel then press

Q

to view.

In ATV mode some areas may receive duplicate stations. There may not be a clear picture or the signal may be weak, so the station order can be changed using ATV Manual Tuning .

REMEMBER: Press ATV/DTV at any time to select between ATV and DTV (DTV TV/DTV RADIO/DTV TEXT if available) modes.

NOTE: The time will be set automatically by transmission but can be advanced or decreased by using Local Time Setting in the DTV Settings screen.

PLEASE NOTE

The Reset TV menu can also be accessed at any time from the SETUP menu.

00GB_RV635D_Euro.book Page 12 Wednesday, July 8, 2009 9:43 AM

SETTING UP YOUR TV

Ant/Cable In (if available)

From this menu, you can set the RF input configuration to cable.

a

Press MENU , and select SETUP menu.

b

Use b to highlight Ant/Cable In and use C or c to select Antenna or Cable .

NOTE: When you attempt to change the Ant/Cable

In setting, a warning message will appear followed by

PIN entry (if PIN has been set) and prompt for Auto

Tuning .

c

When Ant/Cable In is set to Cable , the following setting options will be provided in the Auto Tuning screen.

Press B or b to select an item, then press C or c to select your desired option.

Auto Tuning

Tuning Mode

Start Scan

DTV and ATV

DTV

Scan Type

Start Frequency

End Frequency

Modulation

Symbol Rate

Network ID

Quick Scan

Auto

Auto

Auto

Auto

Auto

With the exception of DTV Scan Type and DTV Modulation items, all of the following items will have 2 operating modes.

The first is Auto where the values for each item are preset by the system. The second is an Input mode where you will be able to enter a single value in place of the pre-set value. If no channel is currently tuned and the Input state is chosen, a system default value will be shown. However, if a channel is currently tuned when the item is accessed, the value of the current channel will be displayed.

DTV Scan Type:

This item determines whether a Quick Scan or a Full Scan will be executed.

The Quick Scan is a simplified version of the Full Scan that is designed to complete in less time.

DTV Start Frequency:

This sets the frequency from which the scan will begin.

DTV End Frequency:

This sets the frequency at which the scan will end.

* Valid entry range for frequency items is 113.000-858.00 for

C-Book/Other and 114.000-858.00 for Nordig-C. If numbers outside of this range are entered, the values will automatically be set to the min. or max. valid value as appropriate.

DTV Modulation:

You can choose from five QAM modulation settings.

DTV Symbol Rate:

This is the baud rate (KS/s) of the scan.

* Valid entry range for Symbol Rate is 4000-7200. If a number outside of this range is entered, value will be automatically set to the min. or max. valid value as appropriate.

DTV Network ID:

This is the Network ID to be utilized for the scan. This item is greyed out when DTV Scan Type is set to “Full Scan”.

* Valid entry range for Network ID is 1-65535. If a number outside of this range is entered, value will be automatically set to the min. or max. valid value as appropriate.

12

00GB_RV635D_Euro.book Page 13 Wednesday, July 8, 2009 9:43 AM

SETTING UP YOUR TV

Auto Tuning

NOTE: As new services are broadcast it will be necessary to retune the television in order to view them.

Auto Tuning will completely re-tune the television and can be used to up date the channel list.

It is recommended that Auto Tuning is run periodically to ensure that all new services are added . All current channels and settings, i.e. favourites and locked channels, will be lost.

a

Press MENU and use C or c to select SETUP menu.

Use b to highlight Auto Tuning . Press

Q

.

SETUP

Menu Language

Country

Ant/Cable In

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

AV Connection

English

Germany

Antenna b

A screen will appear warning that previous programmes and settings will be deleted.

Auto Tuning

Previous settings will be lost!

Press EXIT for no change.

Tuning Mode DTV and ATV

Start Scan

Use C or c to select DTV and ATV , DTV or ATV , if available, then highlight Start Scan and press

Q

to continue with the Auto Tuning .

NOTE: If you have selected " Others " for the Country field in the SETUP menu, and select the tuning mode other than " DTV " , choose the optimum ATV broadcasting system (B/G, I, D/K or L).

The television will start to search for all available DTV and/or ATV services.

You must allow the television to complete the search.

When the search is complete the Auto Tuning screen will display the services found.

c

Use b or B to move through the list to select a channel then press

Q

to view.

ATV Manual Tuning

Tuning

The television can be tuned-in manually using ATV Manual

Tuning . For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or when you want to tune-in a station on another System .

Use C and c to move across the screen and select any of the

ATV Manual Tuning options. Then use B or b to adjust the settings.

ATV Manual Tuning

System: I

1 A C 2 0 V C R

1 2 3 4 5 6 7 8 9

1 Position:

The number to be pressed on the remote control to tune the channel.

2 System:

Specific to certain areas.

3 Colour System:

Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source.

4 Skip:

8 means nothing has been saved or the facility to skip the channel is ON. See page 15.

5 Signal Class:

The channel classification.

6 Channel:

The channel classification and the channel number on which a station is being broadcast.

7 Search:

Search up and down for a signal.

8 Manual Fine Tuning:

Only used if interference/weak signal is experienced. See page 43.

9 Station:

Station identification. Use the B or b and C or c buttons to enter up to seven characters.

To allocate a position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film in the media recorder and press PLAY, then manually tune.

13

00GB_RV635D_Euro.book Page 14 Wednesday, July 8, 2009 9:43 AM

SETTING UP YOUR TV a

Press MENU and using C or c select the SETUP menu. With b highlight ATV Manual Tuning and press

Q

to select.

SETUP

Menu Language

Country

Ant/Cable In

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

AV Connection

English

Germany

Antenna b

Use B or b to highlight the position required e.g.

we suggest Pos. 0 for a media recorder.

ATV Manual Tuning

Pos.

Channel

1

2

3

4

C2

S10

C7

S40

5

6

7

8

C22

C25

C28

C30

Station

Different Channel numbers may be displayed.

c

Press

Q

to select. If the channel is set to skip, Skip must be removed before storing.

d

Press c to select System and use B or b to change if required.

ATV Manual Tuning

System: I g

Each signal will show on the television, if it is not your media recorder, press B or b again to restart the search.

h

When your media recorder signal is found, press c to move along to Station . With B , b , C and c put in the required characters, e.g.

VCR .

ATV Manual Tuning

Station: VCR

1 A C 2 0 V C R i

Press

Q

to save.

j

Repeat for each position you want to tune or, press

MENU to return to the list of channels and select the next number to tune.

k

Press EXIT when you have finished.

l

To name external equipment, e.g.

DVD on EXT 2, press o to select o 2, then select Manual Settings from the SETUP menu.

m

Press c to select Label then using B , b , C and c put in the required characters.

Manual Settings

Label: DVD

EXT 2 A D V D

PLEASE NOTE

This television has direct channel entry if the channel numbers are known.

Select the ATV Manual Tuning screen in Step 3 .

Enter the Position number , the System , then C for standard (terrestrial) channels or S for cable channels and the Channel number. Press Q to save.

e

Then press c to select Search .

f

Press B or b to begin the search. The search symbol will flash.

ATV Manual Tuning

Search:

14

00GB_RV635D_Euro.book Page 15 Wednesday, July 8, 2009 9:43 AM

SETTING UP YOUR TV

Skip

To prevent certain channels from being viewed, positions can be skipped. The remote control must be removed as the channels will still be available using the number buttons. Channels can then be watched as normal using the controls on the television, but the television will not show the skipped channel positions.

a

Select ATV Manual Tuning from the SETUP menu.

b

Use B or b to highlight the position to be skipped and press

Q

to select.

ATV Manual Tuning

Pos.

Channel

1 C2

2

3

4

5

S10

C7

S40

C22

6

7

8

C25

C28

C30

Station

ABC1

ABC1 c

Press c to select Skip .

d

Use B or b to turn Skip on.

Press

Q

.

8 on the screen indicates a skipped position.

ATV Manual Tuning

Skip: On

Sorting positions

Channels may be moved and saved to the position of your choice.

a

Select ATV Manual Tuning from the SETUP menu.

b

With the list of channels now showing use B or b to highlight the channel you want to move and press c .

The selected channel will be moved to the right of the screen.

ATV Manual Tuning

Pos.

Channel

2 S10

3

4

5

1

6

7

C7

C40

C22

C2

C25

C28

8 C30

Station

ABC1

ABC1 c

Use B or b to move through the list to your preferred position. As you do so the other channels will move to make room.

d

Press C to save your move.

Repeat as necessary, then press EXIT .

e

Press MENU and repeat from Step 2 or press EXIT .

Each position has to be individually selected. To turn

Skip off, repeat the procedure for each position.

Skipped positions cannot be selected by P U and P u or by the controls on the television, but can still be accessed by the number buttons on the remote control.

15

00GB_RV635D_Euro.book Page 16 Wednesday, July 8, 2009 9:43 AM

SETTING UP YOUR TV

DTV Manual Tuning

NOTE: This feature varies depending on the Ant/Cable In setting.

Manual Tuning

This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.

a

Select DTV Manual Tuning from the SETUP menu and press

Q

.

DTV Manual Tuning

WEAK

Signal Strength

Quality GOOD

Channel

AVERAGE

85%

Start Scan

STRONG

76%

13 b

Enter the multiplex number using the number buttons or use C or c to adjust the number up or down.

c

Highlight Start Scan , then press

Q

. The television will automatically search for that multiplex.

DTV Manual Tuning

New Pos.

1

2

0 New Channels - Total 6

Name

ABC ONE

ABC TWO

7

40

51

ABC THREE

ABC NEWS 24

ABCi

Type

When the multiplex is found any channels that are not currently in the channel list will be added and the channel information at the top of the screen will be updated.

d

Repeat as necessary. Press EXIT to finish.

Manual Tuning for DVB-C

When Ant/Cable In is set to Cable, DTV Manual Tuning items are as follows:

Frequency – input a specific frequency to be scanned

Modulation – choose from one of five QAM modulation options

Symbol Rate – input a specific baud rate (KS/s) to be used for the manual scan

DTV Settings

Channels

The channel order may be changed to suit your personal preference.

a

Select DTV Settings from the SETUP menu and press

Q

.

b

Select Channels and press

Q

.

DTV Settings

Channels

Channel Options

Subtitle and Audio

PIN Setting

Parental Control

Local Time Setting

Auto Channel Update

DVB Character Set

11:51

Off

Standard c

With the list of channels showing use b or B to highlight the channel you want to move and press c .

Channels

Pos.

1

2

7

30

40

51

Name

ABC ONE

ABC TWO

ABC THREE

CABC Channel

ABC NEWS 24

ABCi

TV d

Use b or B to move through the list to your preferred position. As you do so the other channels will move to make room.

e

Press C to save your move. Repeat as necessary, then press EXIT .

To renumber for the highlighted channel, press the

RED button on the remote control.

16

00GB_RV635D_Euro.book Page 17 Wednesday, July 8, 2009 9:43 AM

SETTING UP YOUR TV

Edit channel number using number buttons and press

Q

.

Channels

Pos.

1

2

7

30

40

5 -

Name

ABC ONE

ABC TWO

ABC THREE

CABC Channel

ABC NEWS 24

ABCi

TV

Location setting

You can select either Home or Store mode. Home is recommended for normal home use. Select Store when using a television for displaying in a shop, etc.

a

Select Location from the SETUP menu.

b

Press C or c to select Home or Store .

Auto Channel Update

If the Auto Channel Update is set to On , when the TV is in standby mode, Digital Tuning is automatically executed and any new channels are saved.

a

Select DTV Settings from the SETUP menu and press

Q

.

b

Press b to select Auto Channel Update and use C or c to select On .

DVB Character Set

This feature allows you to manually set the character set

( Standard = Table 0 or West = Table 5) to be used for DVB-

C or DVB-T channels.

a

Select DTV Settings from the SETUP menu and press

Q

.

b

Press b to select DVB Character Set and use C or c to select Standard or West .

Analogue switch-off

This is a digital television which is integrated to allow the use of both digital and analogue services. However, during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services.

This ‘switch-off’ will happen in a number of phases, which will be advertised in your area well in advance. It is recommended that at each phase the television is re-tuned to ensure that existing and new digital services can be viewed without disruption.

17

00GB_RV635D_Euro.book Page 18 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

General controls

Selecting positions

To select a position, use the numbered buttons on the remote control.

Positions can also be selected using P U and P u .

To display on-screen information i.e.

position, input mode or stereo/mono signal, press . Press again to cancel.

The Time Display – analogue only

The time display facility allows the current (text service) time to be seen on the television screen.

Press

D

whilst watching a normal television broadcast to see a time display from the broadcaster. It will remain on screen for about 5 seconds.

NOTE: This display may not be available in some cases.

Stereo and Bilingual transmissions

For ATV programmes

If stereo or dual language broadcasts are transmitted, the word

Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear.

Stereo… Press s

to select Stereo or Mono .

Bilingual… Bilingual transmissions are rare. If they are transmitted, the word Dual will be displayed. Choose the required programme number and if the word Dual appears press s

to select Dual 1 , Dual 2 or Mono .

For DTV programmes

For stereo or dual mono broadcasts, press s and use C or c to select settings.

Mode Display

Stereo

Pressing c

Stereo S Left S Right

Dual mono Dual 1 S Dual 2 S Dual

Mono

Multichannel

For multi-audio track broadcasts, press s

repeatedly to change the audio language (see ‘Audio language’ on page 36).

Quick Menu

Quick Menu helps you access some options quickly, such as

Picture Mode, Picture Size, More Information, Sleep

Timer etc.

Press QUICK to display the Quick Menu and use B or b to select the option.

Quick Menu

Picture Mode

Picture Size

Favourites

More Information

Sleep Timer

Media Player

Headphone Level

System Information

0

AutoView

Super Live

00:00

NOTE: Quick Menu items are different depending on the current mode.

Mode

When viewing a

TV programme or pictures from the external input

When using EPG

When using

Media Player

Quick menu item

Picture Mode

Picture Size

Channels/Favourites

More Information

Sleep Timer

Media Player

Headphone Level

System Information

Genre Colour

EPG Update/

Cancel EPG Update

Interval Time

Repeat

Description

See page 23.

See page 21.

See page 35.

See page 33.

See page 31.

See page 28.

See page 20.

See page 37.

See page 33.

See page 33.

See page 29.

See page 29.

18

00GB_RV635D_Euro.book Page 19 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Sound controls

Volume controls and mute sound

Volume

Press Y or y to adjust the volume.

Sound Mute

Press once to turn the sound off and again to cancel.

Dual

If a programme or film is being broadcast with a soundtrack in more than one language, the DUAL feature allows selection between them.

a

Press MENU and C or c to select SOUND .

b

Use b to highlight Dual then press C or c to choose between Dual 1 or Dual 2 .

Advanced Sound Settings

Stereo Extension, Voice Enhancement, and Dynamic Bass

Boost help to create an enhanced surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider.

a

In the SOUND menu, press b to highlight Advanced

Sound Settings then press

Q

.

b

Press b to highlight Stereo Extension then press C or c to select On or Off .

Advanced Sound Settings

Stereo Extension

Voice Enhancement

Dynamic Bass Boost

Off

On

High c

Press b to highlight Voice Enhancement then press

C or c to select On or Off .

d

Then press b to highlight Dynamic Bass Boost and using C or c select the desired bass expansion level

( Off, Low or High ).

SOUND

Dual

Bass

Treble

Balance

Advanced Sound Settings

Stable Sound

Dynanic Range Control

Audio Level Offset

0

0

0

Dual 1

Off

On

Bass, Treble and Balance

The sound controls are accessible in digital and analogue modes.

a

Select the SOUND menu.

b

Press b to highlight Bass , Treble or Balance and C or c to change the setting.

Stable Sound

®

The Stable Sound feature limits high volume levels on the TV speakers preventing the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial.

a

Select the SOUND menu.

b

Use b to highlight Stable Sound then press C or c to select On or Off .

Dynamic Range Control

This feature allows control of audio compression for some digital TV programmes except MPEG-1 and MPEG-2 audio.

a

In the SOUND menu, press b to highlight Dynamic

Range Control .

b

Press C or c to select On or Off .

NOTE: If the Stable Sound and Dynamic Range Control features are both set to On , each effect may not be noticeable.

19

00GB_RV635D_Euro.book Page 20 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Audio Level Offset

It tends to change into loud volume when switching from a DTV

5.1ch to a DTV 2ch, an ATV or an external input. Using the

Audio Level Offset feature reduces these volume differences.

a

Set the volume level usually used when watching DTV

5.1ch programme.

b

Tune to a channel which is DTV 2ch or ATV, or an external input.

c

In the SOUND menu, press b to highlight Audio

Level Offset and press

Q

.

d

Press b to highlight an option, then use C or c to adjust the volume level.

Audio Level Offset

DTV 2ch

ATV

External Input

-5

0

0

NOTE:

• The available item alters depending on the current input source. For example, while watching the DTV 2ch programme, only the DTV 2ch is available and other two items are greyed out in the menu. It helps you to adjust easily responding to each condition.

• When watching the DTV 5.1ch programme, this feature is not available.

Headphone Settings

This setting is used to set the sound output while connecting the headphone.

Speaker

Link

On

Off

Headphone Speakers

Sound comes out

( 2 – + is available.)

No sound

Sound comes out

(Headphone level menu is available.)

(

Sound comes out

2 – + is available.) a

In the SOUND menu, press b to highlight

Headphone Settings then press

Q

.

b

Press b to highlight Speaker Link and use C or c to select On or Off .

c

If you select Off , then highlight Headphone Level and using C or c to adjust the headphone sound.

Headphone Settings

Speaker Link

Headphone Level 50

Off

Audio description

Audio description is an additional narrative sound track for visually impaired people to understand and enjoy the story line more fully.

If this function is activated by pressing AD button, when the programme has such signal, the word AD will be displayed in the Channel Banner.

You can select sound from speakers or headphone as you desire.

a

From the SOUND menu select Audio Description and press

Q

. b

Highlight Audio Description then press C or c to select On .

Audio Description

Audio Description

Mixing Level

Speaker Out

50

On

Off c

To adjust the level of the audio description sound to the main sound, highlight Mixing Level and use C or c .

d

Highlight Speaker Out then press C or c to select On or Off .

On: sound from both the headphone and speakers.

Off: sound from the headphone.

See "Headphone Settings" to adjust the headphone sound.

20

00GB_RV635D_Euro.book Page 21 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Widescreen viewing

Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.

WIDE

Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9,

20:9 etc.) black bars may be visible on the top and bottom of the screen.

4:3

Use this setting to view a true 4:3 broadcast.

SUPER LIVE

This setting will enlarge a 4:3 image to fit the screen by stretching the image horizontally and vertically, holding better proportions at the centre of the image. Some distortion may occur.

CINEMA

SUBTITLE

When watching ‘all sides panel format’ films/video tapes, this setting will eliminate or reduce the black bars at all sides of the screen by zooming in and selecting the image without distortion.

When subtitles are included on a letterbox format broadcast, this setting will raise the picture to ensure that all the text is displayed.

SUBTITLE

14:9

Use this setting when watching a

14:9 broadcast.

21

00GB_RV635D_Euro.book Page 22 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

NATIVE

This setting will show the picture without over scan, i.e. WYSIWYG.

This option is only available when watching video signal source via

HDMI.

PC NORMAL

This setting will show the picture without over scan, i.e. WYSIWYG.

This option is only available when watching PC signal source via HDMI or PC terminal.

PC WIDE

This setting will show the picture without over scan and side panel.

This option is only available when watching PC signal source via HDMI or PC terminal.

Dot by Dot

“Dot by Dot” is a non-scaling display.

Depending on the input signal format, the picture is displayed with side panels and/or bars at the top and bottom (i.e. VGA input source).

Press QUICK and highlight Picture Size , then press Q to display the list of available widescreen formats.

Use B and b to highlight the required format and Q to select.

AV format

Picture Size

Wide

Super Live

Cinema

4:3

Subtitle

14:9

Native

PC format

Picture Size

PC Normal

PC Wide

Dot by Dot

Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws.

22

00GB_RV635D_Euro.book Page 23 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Picture controls

Most of the picture controls and functions are available in both digital and analogue modes.

PLEASE NOTE: features not available will be greyed out .

Picture Position

The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs.

a

In the SETUP menu press b until Picture Position is highlighted.

SETUP

Country

Ant/Cable In

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

AV Connection

Picture Position

Germany

Antenna b

Press

Q

to view the options available for the picture format that has been selected.

c

Press B and b to select an option, then C or c to adjust the settings.

The options alter depending on currently selected widescreen format and the input signal.

In Cinema :

Picture Position

Horizontal Position

Vertical Position

0

Reset

0

To return to the original factory settings select Reset in the Picture Position menu and press

Q

.

Picture Mode

This television offers the choice of personalising the picture style.

AutoView , Dynamic , Standard , Movie , Store , Game and

PC are preset options and affect many features/settings within the television.

NOTE:

• Because the AutoView mode automatically adjusts picture settings based on ambient light conditions and input signal content, the Auto Brightness Sensor and Expert Mode menus are greyed out when it is selected.

• Store mode is only available when Location is set to Store .

• Game mode is available in external input mode (other than aerial input). When you select Game mode, suitable widescreen formats will be selected.

• PC mode is available in RGB/PC input mode or HDMI input mode.

a

In the PITCURE menu press b to select Picture Mode .

PICTURE

Picture Mode

Reset

Backlight

Contrast

Brightness

Colour

Tint

Sharpness

60

95

0

0

0

0

AutoView b

Press C or c to select the picture mode you prefer and press

Q

.

NOTE: The picture mode you select affects the current input only. You can select a different picture mode for each input.

Picture preferences

You can customise current picture mode settings as desired. For example, while selecting " Dynamic, " if you change the following items, such as Backlight , Contrast , Brightness ,

Colour , Tint , Sharpness and the Advanced Picture Settings items, your new setting is saved as the same name " Dynamic.

" a

In the PICTURE menu press b to select either

Backlight , Contrast , Brightness , Colour , Tint or

Sharpness and press

Q

.

b

Press C or c to adjust the settings.

23

00GB_RV635D_Euro.book Page 24 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Reset

This feature resets all picture settings to the factory settings except Picture Mode .

NOTE: If any picture settings have not been changed, Reset is not available.

a

In the PICTURE menu press b to select Reset and press

Q

.

b

A confirmation message will appear. Press C or c to select Yes and press

Q

.

3D Colour Management

When 3D Colour Management is set to On it allows the ‘Base

Colour Adjustment’ feature to become available.

a

In the PICTURE menu press b to select Advanced

Picture Settings and press

Q

.

b

Press b to select 3D Colour Management .

Advanced Picture Settings

3D Colour Management

Base Colour Adjustment

Colour Temperature

Auto Brightness Sensor Settings

Active Backlight Control

Black/White Level

Static Gamma

Noise Reduction

10

0

On

On c

Press C or c to select On or Off , then press

Q

.

Base Colour Adjustment

The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source.

a

In the Advanced Picture Settings menu press b to select Base Colour Adjustment , then press

Q

.

b

Press B or b to select an option, then press

Q

to move to the adjustment window.

Base Colour Adjustment

Hue

Red

Green

Blue

0

0

0

Yellow

Magenta

Cyan

0

0

0

Saturation

0

0

0

0

0

0

Reset

Brightness

0

0

0

0

0

0 c

Press C or c to select Hue , Saturation or

Brightness , then press B or b to adjust the settings as required.

Red

Hue

0

Saturation Brightness

0 -1 d

Press

Q

to return to the previous menu.

To return to the factory settings select Reset and press

Q

.

Colour Temperature

Colour Temperature increases the ‘warmth’ or ‘coolness’ of the picture by increasing the red or blue tint.

a

In the Advanced Picture Settings menu press b to select Colour Temperature and press

Q

.

b

Press C or c to select Colour Temperature setting

(0–10).

Colour Temperature

Colour Temperature

Red -Offset

Green -Offset

Blue -Offset

Red -Gain

Green -Gain

Blue -Gain

Reset

0

0

0

0

0

0

5 c

Press B or b to select an option you want to adjust, then press C or c to adjust the settings.

d

Press

Q

to return to the previous menu.

To return the colour temperature settings to the factory defaults, select Reset and press

Q

.

NOTE: If Picture Mode is set to AutoView , you can adjust

Colour Temperature only.

24

00GB_RV635D_Euro.book Page 25 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Auto Brightness Senser Settings

When Auto Brightness Senser Settings is activated it will automatically optimise the backlighting levels to suit ambient light conditions.

a

In the Advanced Picture Settings menu press b to select Auto Brightness Senser Settings and press

Q

.

b

Press C or c to select On and press

Q

.

Auto Brightness Sensor Settings

Auto Brightness Sensor

Backlight Adjustment Pro

On c

Press b to select Backlight Adjustment Pro and press

Q

.

d

The Backlight Adjustment Pro window will appear.

Press

Q

again to display the adjustment window.

e

Press C or c to select the point and press B or b to adjust the level.

Backlight Adjustment Pro

Backlight Control Level

100

Control

Level

0

Ambient Light

48

Cancel

Reset

Black/White Level

Black/White Level increases the strength of dark areas of the picture to improve the definition.

a

In the Advanced Picture Settings menu press b to select Black/White Level .

b

Press C or c to adjust the level. The effect depends on the broadcast and is most noticeable on dark colours.

Static Gamma

The static gamma feature allows you to adjust the levels of black in the picture.

a

In the Advanced Picture Settings menu press b to select Static Gamma .

b

Press C or c to adjust the level.

MPEG NR – Noise Reduction

When watching a DVD the compression may cause some words or picture elements to become distorted or pixelated.

Using the MPEG NR feature reduces this effect by smoothing out the edges.

a

In the Advanced Picture Settings menu press b to select Noise Reduction and press

Q

.

b

Press b to select MPEG NR .

Noise Reduction

MPEG NR

DNR

Low

Auto c

Press C or c to select Low , Middle , High or Off to suit your preference.

f

Press

Q

to fix the adjustment.

To cancel the adjustment when selecting a point, select

Cancel and press

Q

.

To return the adjustments of all points to the factory defaults, select Reset and press

Q

.

Active Backlight Control

When Active Backlight Control is activated, it will automatically optimise the backlighting levels for dark scenes.

a

In the Advanced Picture Settings menu press b to select Active Backlight Control .

b

Press C or c to select On or Off .

DNR – Digital Noise Reduction

DNR enables you to ‘soften’ the screen representation of a weak signal to reduce the noise effect.

a

Select DNR from the Noise Reduction menu. b

Use C or c to select Low , Middle , High , Auto or Off .

The differences may not always be noticeable (for the best result use lower settings as picture quality can be lost if the setting is too high).

25

00GB_RV635D_Euro.book Page 26 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Resolution+

The Resolution+ feature allows you to adjust the levels for your desired picture settings.

a

In the Advanced Picture Settings menu, press b to select Resolution+ and press

Q

.

b

In the Resolution+ field, select On .

Resolution+

Resolution+

Level

On

3 c

Press b to highlight Level , then press C or c to adjust the level.

NOTE:

• This feature may not work properly depending on the content.

• Adjustable range varies according to the Picture Mode you set.

• The noise may appear on the image depending on the device connected to the TV (e.g. a device with specific enhancer function).

Cinema Mode

If there are lines or jagged edges in the film or programme being viewed, selecting Cinema Mode can help correct this by smoothing out the picture.

a

In the Advanced Picture Settings menu press b to select Cinema Mode .

b

Press C or c to select On or Off .

NOTE: When a DVD with subtitles is being played this mode may not work correctly.

Expert Mode

This feature enables to turn on/off the colours red, green and blue individually for adjusting each colour more accurately.

NOTE: This feature is not available when Picture Mode is set to AutoView .

a

In the Advanced Picture Settings menu press b to select Expert Mode and press

Q

.

b

Press B or b to select either Red , Green or Blue you want to adjust and press C or c to select On .

Select Off on other two colours.

Expert Mode

Red

Green

Blue

Colour

Tint

50

50

On

On

Off c

Press b to select Colour or Tint , and then press C or c to adjust.

Resetting the advanced picture settings

This feature enables to reset the current Advanced Picture

Settings to the default values.

a

In the Advanced Picture Settings menu press b to select Reset .

b

Press

Q

.

26

00GB_RV635D_Euro.book Page 27 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Control Visualization

This feature displays the brightness histogram and control curve of each scene.

a

In the PICTURE menu, press b to select Control

Visualization and press

Q

. The histogram window will appear.

Control Visualization

Distribution

Number

Of

Pixels

Brightness

Control Curve

4:3 Stretch

When 4:3 Stretch is activated the size switching system changes 4:3 programmes into full screen picture.

a

In the PREFERENCES menu press b to highlight 4:3

Stretch .

b

Press C or c to select On or Off .

Blue Screen

When Blue Screen is selected the screen will turn blue and the sound will be muted on analogue channels and external input modes when no signal is received.

a

In the PREFERENCES menu press b to highlight Blue

Screen .

b

Press C or c to select On or Off .

Output

Input b

Press RETURN to return to the previous menu.

Automatic Format (Widescreen)

When this television receives a true Widescreen picture and

Auto format is On , it will automatically be displayed in

Widescreen format irrespective of the television’s previous setting.

a

Press MENU and C or c to select the PREFERENCES menu.

b

Press b to highlight Auto Format , then C or c to select On or Off .

Side panel adjustment

The Side Panel feature lightens or darkens the band on each side of the screen when in 4:3 or 14:9 format. This helps prevent image retention of the band and can also make viewing in bright or dark conditions more comfortable.

a

In the PREFERENCES menu press b to select Side

Panel .

b

Press C or c to adjust (1-3).

Picture still

This feature is used to hold a still image on the screen.

Press r

to hold an image on the screen, press r again to cancel.

PREFERENCES

Teletext

Panel Lock

Auto Format

4:3 Stretch

Blue Screen

Side Panel

TOSHIBA Illumination

Auto

Off

On

Off

On

1

On

27

00GB_RV635D_Euro.book Page 28 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Enjoying Photo through USB port

The Photo Viewer allows you to playback JPEG files from a USB storage device. Entire files can be viewed individually in a

Single View or Slideshow mode, or as thumbnails in a Multi

View overview mode.

Photo Viewer specifications

Data type: JPEG Exif ver2.2

File format: DCF ver1.1

Maximum photo size: 9 MB

Maximum number of files: 2000 / Folder

Maximum photo resolution: 16384 5 16384 pixels

PLEASE NOTE

• Gently insert the USB device into the port and do not remove while viewing Media Player.

• USB device: USB Mass Storage Class device (MSC)

• Connectivity is not guaranteed for all devices.

• Connect the USB device to the TV directly.

• Do not use a USB hub.

• You must obtain any required permission from copyright owners to use copyright content. Toshiba cannot and does not grant such permission.

To open Photo Viewer

There are two kinds of methods to open Photo Viewer as follows:

Automatically open a

Please confirm the Auto Start in the Media Player menu is set to On . See below.

b

Gently insert a supported USB storage device to the

USB port on the side of the TV. The prompt will appear.

NOTE: If inserting and removing the USB connector frequently, the prompt may not appear.

c

Press C or c to select Yes , then press

Q

. The Media

Player menu will appear. When you select No , nothing happens.

USB device was connected to TV. Do you want to open

Media Player?

No Yes

NOTE: The prompt will disappear after about 6 sec.

Open from Menu a

Press MENU and C or c to select the APPLICATIONS menu.

b

Press b to select Media Player then press

Q

.

c

Press b or B to select Photo then press

Q

.

Media Player

Photo

Auto Start On d

Press b or B to select active device if the selection window appears then press

Q

. The Photo Viewer will open.

NOTE:

• The viewer will also open even if there are no photo contents at all.

• While the Photo Viewer is active, the on-screen menus cannot be displayed.

28

00GB_RV635D_Euro.book Page 29 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Viewing photo files

There are three types of view modes.

Multi View

This view allows you to search for photos in the grid.

These pictures are displayed by use of thumbnail data in each picture.

Photo

/Folder/select Folder or File

1/54

E05265464.jpg

OK Select P Page RETURN Back

The initial highlighted position will be on the top left thumbnail in the Multi view.

a

Press B b C c to move the highlight in one window.

If all of the photo contents will not fit in one screen, when pressing C at the top left thumbnail, the screen will move to the previous page. At this time, the highlight shall be the content at the bottom right.

Conversely, when pressing c at the bottom right thumbnail, the screen will move to the next page. At this time, the highlight shall be the content at the top left.

P U P u buttons can be used to page up/down the photo list when there are more contents than will fit onto one screen. When the P U P u buttons pressed, the highlight shall be the content at the top left of

Previous/Next list.

b

When you select a folder, press

Q

to move to next layer. Press RETURN to move back to previous layer.

c

Press

Q

to move to the single view mode and play the selected photo content.

Single View

In this view mode, the only contents it locates on the same directory shall be played. This view allows you to change the photo content manually. When moving from Multi view to the single view, the selected photo content shall be played.

a

Press c to view the next photo content. Press C to view the previous photo content.

b

Press B to rotate the image 90° clockwise. Press b to rotate the image 90° counterclockwise.

c

Press to display file status information (content number, photo title, shooting date and time, resolution etc.). The information will be removed by time-out (about 6 sec) or pressing again.

Slideshow

This view allows you to watch the slide show of the photos. In this view mode, the only contents it locates on the same directory shall be played. a

To start slideshow, press

Q

in the single view mode.

b

Press C / c to view the previous/next photo content.

c

Press B or b to rotate the photo.

d

Press to display file status information. The information will be removed by time-out (about 6 sec) or pressing again.

To set Interval time and Repeat setting: a

Press QUICK to open the Quick Menu .

Quick Menu

Interval Time

Repeat

3sec

On b

Press B or b to select either Interval Time or

Repeat .

c

Press C or c to adjust the setting and press

Q

.

To close the Photo Viewer a

Press EXIT . The television will return to the last viewed channel or external input.

29

00GB_RV635D_Euro.book Page 30 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Other features The timers

Panel lock

Panel lock disables the buttons on the television. All buttons on the remote control can still be used.

a

From the PREFERENCES menu select Panel Lock and choose On or Off using C or c .

Programme Timers – digital only

This feature will set the television to go to a specific channel at a certain time. It can be used to view a particular programme, or by setting the mode to daily or weekly, can be used to view a series of programmes.

a

Press MENU and C or c to select the APPLICATIONS menu.

PREFERENCES

Teletext

Panel Lock

Auto Format

4:3 Stretch

Blue Screen

Side Panel

TOSHIBA Illumination

Auto

Off

On

Off

On

1

On

APPLICATIONS

Media Player

EPG

Programme Timers

On Timer

Sleep Timer 00:00

When Panel Lock is On , a reminder will appear when the buttons on the television are pressed.

If the standby button is pressed the television will switch off and can only be brought out of standby by using the remote control.

TOSHIBA Illumination

You can set the illumination mode of the TOSHIBA logo located on the front panel to On or Off .

a

In the PREFERENCES menu, press b to select

TOSHIBA Illumination .

b

Press C or c to select either On or Off .

b

Press b to select Programme Timers , then press

Q

.

c

Press b if necessary to select an open timer position, then press

Q

. The Edit Timer menu will now appear on screen.

d

Press B and b to go through the list adding the details of the programme by using the number buttons and C and c to make selections.

30

Edit Timer

Timer Type

Channel

Date

Start Time

End Time

Repeat

Subtitle

0 - 9 Enter Number

10:50 Tue, 26 Apr

Reminder

30 CBBC Channel

Tue, 26 Apr 2009

10:49

11:49

Once

Off

OK Save Timer RETURN Back e

When all the details have been entered press

Q

to save the timer.

The ORANGE/RED programme timer indicator on the front of the television will be lit (see page 45 for details).

PLEASE NOTE: When a timed programme is about to start, an information screen will appear offering the option of watching or cancelling the programme. The menus and other channels will not be available during the timed programme unless the programme timer is cancelled. The programme timer you set is not performed when the TV is turned off with the !

POWER switch.

00GB_RV635D_Euro.book Page 31 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

On Timer

The feature allows you to set the television to turn on automatically in a preset channel at a certain time of day or after a certain length of time. While On Timer is set to On , the green on timer indicator on the front of the television is lit.

a

In the APPLICATIONS menu, press b to select On

Timer and press

Q

.

b

Press B or b to select Enable On Timer , and then press C or c to select On .

On Timer

Enable On Timer

Enable DTV Clock

Power On Time

Repeat

Input

Channel

Volume

Time until Power On

On

On

00:00

Once

DTV

12 ABC

20

00:00 c

Press b to select Enable DTV Clock , and then press

C or c to select On or Off .

d

Press B or b to go through the list adding the details of the on timer by using the number buttons and C and c to make selections.

Power On Time (only for DTV Clock On mode) : Set the time you prefer with the number buttons.

Repeat (only for DTV Clock On mode): Select the desired on timer operation ( Once , Everyday , Mon-

Fri , Mon-Sat , Sat-Sun ).

Input: Select video input source (ATV, DTV, EXT 1, EXT

2, EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC).

Channel: Set the channel when the television turns on.

NOTE: When any external input is selected in the

Input field, this feature cannot be selected.

Volume: Set the volume when the television turns on.

Time until Power On (only for DTV Clock Off mode):

Set the time you prefer until the TV turns on from now with the number buttons (maximum of 12 hours and

50 minutes).

To cancel the on timer a

In the On Timer menu, select Enable On Timer b

Press C or c to select Off .

Sleep Timer

The television can be set to turn itself Off after a certain length of time.

a

In the APPLICATIONS menu, press b to select Sleep

Timer . Use the number buttons to set the required time. For example, to switch the television off in one and a half hours enter 01:30, or press c / C to increase/decrease in steps of 10 minutes.

b

Press EXIT to finish.

c

To cancel the Sleep Timer , enter zero in the above setting.

31

00GB_RV635D_Euro.book Page 32 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Digital on-screen information and Programme

Guide

When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels.

Information

a

Press , the information screen will appear giving details of the channel and programme currently being viewed.

4 CANAL+

English

10:34 Tue, 26 Apr

Now City Hospital

SD 16:9 News

10:00- 10:49

15 min left

On-screen Information icons

Service info

Icon

Audio info

Audio/Subtitle info

Event info

Timer info

D

D+

HD, SD

16:9, 4:3

0, 4 – 18

Description

Service type

(TV, Radio, TEXT)

Skip

Mono

Stereo

Dual mono

Multichannel

Dolby Digital

Dolby Digital+

For Hard of Hearing

Video format (HD, SD)

Video Aspect

Teletext

Multi-audio track

Parental rating

Encrypted

Recording

Reminder

Next

Also

10:49- 11:49 b

Press B or b to select the “ Now ”, “ Next ” or “ Also ” information guide.

c

To record the following programme, select " Next " and, press

Q

. The Edit Timer screen will appear.

Edit Timer

Tue, 26 Apr 11:00

30 CBBC Channel

Seven Wonder4

Timer Type

Start Time

End Time

Repeat

Subtitle

Edit

50

OK Save

10:50 Tue, 26 Apr

Recording

10:49

11:49

Once

On

RETURN Back d

The details of the programme will have been added to the timer. Press

Q

to save.

To indicate that a Recording Timer has been set, a clock icon will be displayed in the Next and Also fields of the information screen. A check mark will appear if the timer is a Reminder Timer.

e

Press b to select Also . Details of programmes that have started on other channels will be provided. Use

C or c to change the display contents.

32

00GB_RV635D_Euro.book Page 33 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Guide

a

Select the on-screen guide by pressing GUIDE , the guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear.

Thu

6 M6

9 W9

11 NT1

6

TV

09

09

18:00 18:30

LES SIM...

LES SIMPSON

10

33 LES SIM...

SUMMERLAND 53

19:00

SUMMERLAND

08 Nicky La...

32 Street fight...

06

10:50 Tue, 6 Apr

19:30 20:00

TOP MODEL

44 LES SIM...

59 Dragon B...

24 Dragon B...

48 K 2000

31 PARIS PREMIERE

34 AB1

06 MA SORCIE...

39 HAPPY DAYS

00 Evamag 27 21 jump street 14

39 HAPPY DAYS

Jerry Springer Show 54 City guys 17 L...

800 FlowerGd 6Mbs

801 FlowerGd 4Mbs

802 FlowerGd 2Mbs

804 Codec 4:3

806 ITV1

807 ITV3

808 ITV2

809 ITV4

You can switch the time scale to 1.25 or 2.5 hours by pressing the GREEN button.

NOTE: Channels are displayed in group of service type

(TV, Radio, Text). Pressing the ATV/DTV button will switch the service type.

b

Press C or c for information on other programmes scheduled for the channel selected. To highlight the first programme in the genre grid, press the RED button.

c

For details of other programmes currently available, press B and b to scroll up and down the channel list.

As channels are selected details of the programme currently being broadcast will appear. Press C or c to view information for future programmes.

d

For information on a highlighted programme press

. To set the timer for that programme, press the

BLUE button to bring up the Programme Timers menu.

NOTE: In order for the recording operation to work properly, the media recorder must be set to the same time as the TV. Regarding the process for recording, please refer to the owner’s manual of the recording equipment.

e

Press P u to advance to the next page, press P U to go back to the previous page.

Genre selection/searching

From the guide screen, you can use the genre selection and search features.

a

Press the QUICK button from the guide screen.

b

Press b or B to highlight Genre Colour in the Quick

Menu , then press

Q

.

Genre Colour Setup

Movies

Colour Setup RETURN Back c

With the focus on a particular genre, press the desired colour key to assign. Four colours will be available to set. Press RETURN to go back to the guide screen.

d

Press the YELLOW button to access the Genre Search screen.

Genre Search

Movies

34 AB1

10:50 Tue, 6 Apr

Hard Rain

31 PARIS PREMIERE Red Corner

11 NT1 The Lawnmower Man

Wed,27 Apr 22:15- 23:55

Thu,28 Apr 1:20- 3:00

9 W9

34 AB1

11 NT1

A Vow to Kill

Parenthood

Body and Soul

31 PARIS PREMIERE The Nun’s Story

9 W9 Red Corner

Fri,29 Apr 1:30- 3:00

Sat,30 Apr 0:45- 2:40

Sat,30 Apr 1:15- 3:00

Sat,30 Apr 15:00- 17:30

11 NT1

31 PARIS PREMIERE

11 NT1

11 NT1

The Real Blonde

Critters

Sat,30 Apr 23:20- 1:15

Sun,1 May 0:40- 2:00

Indiana Jones and the Temple of Doom Sun,1 May 21:10- 23:20

The jackal

Sun,1 May 0:40- 2:20

Sun,1 May 23:20- 1:15

34 AB Coup De Ville

Wed,27 Apr 0:15- 1:45

Mon,1 May 1:10- 3:00 e

Press C or c to select the genre. Programmes listed will change for the new genre. Press B or b to highlight a particular programme.

f

When a current programme is selected, pressing

Q will tune to that programme. When a future programme is selected, pressing

Q

will open the Edit

Timer menu.

g

For information on a highlighted programme press

.

h

To exit the Genre Search and go back to the guide screen, press the YELLOW button.

33

00GB_RV635D_Euro.book Page 34 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Digital settings – parental control

In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked.

These can then only be accessed with a security code PIN when in digital mode.

Setting the PIN

a

Press MENU and c to select the SETUP menu.

b

Use b to select DTV Settings then press

Q

.

Parental Setup

The Parental Control feature allows you to block programmes according to their rating levels. If a PIN has been set, you will need to enter it before adjusting the level.

a

In the DTV Settings menu press b to select Parental

Control , then press

Q

.

b

Use C or c to choose options ( None or age settings

(4-17)).

Parental Control

Parental Setup None

To view blocked programmes, enter the PIN. To reactivate the Parental Control, turn the TV off and then on again.

SETUP

Menu Language

Country

Ant/Cable In

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

AV Connection

English

Germany

Antenna c

Press b to highlight PIN Setting then press

Q

.

DTV Settings

Channels

Channel Options

Subtitle and Audio

PIN Setting

Parental Control

Local Time Setting

Auto Channel Update

DVB Character Set

11:51

Off

Standard d

Using the number buttons enter a four digit number.

Once entered you will be prompted to confirm by entering again.

PIN Setting

New PIN:

Confirm PIN:

* * * *

The PIN number is now set.

If the PIN code has been set, when Auto Tuning and

Reset TV are executed, entering the PIN will be necessary.

34

00GB_RV635D_Euro.book Page 35 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Digital settings – Channel

Options

Selecting favourite channels

Favourite Channels creates a list of the digital channels that are watched most. Four lists can be created, these can be a mixture of television, radio and text channels.

a

From the DTV Settings menu press b to select

Channel Options and press

Q

.

Channel Options

Channel

1119 ABC ONE

Fav.

1 2 3 4

TV b

Press c repeatedly to select the favourite list (Fav.1-4) c

Press B or b to select a channel position to be added.

Press

Q

to select the ones required. A tick will appear in the box as they are selected.

d

When all favourites have been selected, press EXIT .

Favourite Channel Lists

a

Press QUICK to open the Quick Menu .

b

Press B or b to select Favourites and press

Q

.

c

The Channel List will appear. Press C or c to select

Favourites 1-4. The number of favourites available depends on how many lists have been created.

Channel List

Favourites 1

6 M6

9 W9

11 NT1

31 PARIS PREMIERE

34 AB1

51 ITV1

Skip channels

This feature allows you to set channels that will be skipped when

P u or P U are used to tune. a

From the DTV Settings menu press b to select

Channel Options and press

Q

.

b

Press c repeatedly to select the skipped channel list.

c

Press B or b to select a channel position to be skipped. Press

Q

to select the ones required. A tick will appear in the box.

d

Press EXIT .

NOTE: Skipped channels cannot be selected by P u or

P U but still be accessed by direct number entry (when tuned a 8 icon will be displayed in the banner to indicate as a skipped channel).

Locking channels

Locking Channels stops the viewing of digital channels, they can only be accessed by entering the PIN.

a

From the DTV Settings menu press b to select

Channel Options and press

Q

.

b

Press c repeatedly to select the Locked Channel list.

c

Press B or b to select a channel position to be locked.

Press

Q

to select the ones required. A tick will appear in the box.

If a PIN has already been set, PIN entry will be required to set the locked channels.

d

Press EXIT .

e

From this point on, when any of the channels in the

Locked Channel list are selected the PIN must be entered before they can be accessed.

d

Press B or b to highlight a channel and press

Q

to watch.

35

00GB_RV635D_Euro.book Page 36 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Digital settings – other settings

Subtitles

In digital mode, this feature will show subtitles on the screen in the selected language provided they are being broadcast.

a

In the DTV Settings menu press b to select Subtitle and Audio and press

Q

.

b

Press b to select Subtitle Type and use C or c to select Normal or For Hard of Hearing .

Subtitle and Audio

Subtitle Type

Primary Subtitle Language

Secondary Subtitle Language

Audio Type

Primary Audio Language

Secondary Audio Language

Normal

English

French

Normal

English

French

Common Interface

The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access

Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information see a service provider.

a

Insert the CAM and card into the Common Interface

Slot, following the instructions provided with the CAM.

A box will appear on screen to confirm that the CAM has been inserted.

b

In the DTV Settings menu press B or b to select

Common Interface and press

Q

.

c

Details of the CAM should now be available.

c

Press b to select Primary Subtitle Language or

Secondary Subtitle Language and use C or c to select an option.

The SUBTITLE button can be used to select subtitle ON or

OFF, and to select subtitle language if more than one subtitle is available.

Audio languages

This feature allows a programme or film to be viewed with a choice of soundtrack language, provided they are currently being broadcast.

a

In the Subtitle and Audio menu press b to select

Audio Type and use C or c to select Normal or For

Hard of Hearing .

b

Press b to select Primary Audio Language or

Secondary Audio Language and use C or c to select an option.

If more than one soundtrack is available, use the s button to select between them.

36

00GB_RV635D_Euro.book Page 37 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Software Upgrade System Information and

Reset TV

When Auto Upgrade is set to On (default setting), the television will automatically upgrade while in standby if new software is available.

a

From the SETUP menu press B or b to select

Software Upgrade and press

Q

.

b c

Press

Use C b to select

or c

Auto Upgrade

Auto Upgrade

to select On or Off .

.

Searching for New Software

If preferred, software upgrades can be searched for manually using Search for New Software .

a

In the Software Upgrade menu press B or b to select Search for New Software .

b

Press

Q

. The television will automatically start searching for a software upgrade, the progress bar will move along the line.

SEARCHING FOR NEW SOFTWARE

Searching for a new software upgrade for this TV.

Searching

If an upgrade is found the television will automatically start downloading. If not, a screen will appear stating that an upgrade is unavailable.

System Information

This feature can be used to check the version of software currently installed. When in DTV mode, it includes additional diagnostic information such as signal strength, signal quality, centre frequency, modulation, etc.

a

From the SETUP menu press B or b to select System

Information .

b

Press

Q

to display the System Information .

System Information

TOSHIBA

2009

2.1.26.0 Feb 19 2009 - 15:56:50 FW:13

WEAK AVERAGE STRONG

Ch22

Ch25

Ch35

Ch46

Poor

Good

Good

Good

Reset TV

Selecting Reset TV will reset all TV settings, including saved channels, to their original factory values.

a

In the SETUP menu press b until Reset TV is highlighted.

b

Press

Q

to select. A screen will appear warning that all settings will be lost. Press

Q

to continue.

When the set powers back on, the Quick Setup screen will appear. Press

Q

to continue, the television will then auto tune. (See ‘Quick Setup’ section on page

11.)

37

00GB_RV635D_Euro.book Page 38 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

PC Settings

Horizontal and Vertical Position

Connect the PC (as shown in the ‘Connecting a PC’ section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference.

a

Press o to select PC , then select PC Settings from the

SETUP menu.

SETUP

Country

Ant/Cable In

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

AV Connection

PC Settings b

Press

Q

. Press B and b to select an option, then C or c to adjust the settings.

PC Settings

Horizontal Position

Vertical Position

Clock Phase

Sampling Clock

Reset

0

0

0

0

Germany

Antenna

Sampling Clock

Adjusting the Sampling Clock alters the number of pulses per scan, this will clear vertical lines on the screen.

a

In the SETUP menu press b until PC Settings is highlighted.

b

Press

Q

to select, then b to highlight Sampling

Clock .

c

Use C or c to adjust until the picture clears.

Reset

To return to the original factory settings.

a

In the SETUP menu press b until PC Settings is highlighted.

b

Press

Q

to select, then b to highlight Reset .

c

Press

Q

.

NOTE: When a PC is connected using HDMI none of these functions will be available.

The screen is disrupted momentarily when adjusting the PC setting. This is not a sign of malfunction.

The default settings and adjustment ranges may vary depending on the input signal format.

Clock Phase

The Clock Phase matches the PC signal with the LCD display.

Adjusting this can clear horizontal stripes and picture blur.

a

In the SETUP menu press b until PC Settings is highlighted.

b

Press

Q

to select, then b to highlight Clock Phase .

c

Use C or c to adjust until the picture clears.

38

00GB_RV635D_Euro.book Page 39 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

Input selection and AV connections

See page 7 for a clear view of the back connection recommendations.

Most media recorders and decoders send a signal through the

SCART lead to switch the television to the correct Input socket.

Alternatively press the external source selection button o until the picture from connected equipment is shown.

This button must be used to view equipment connected using the COMPONENT VIDEO INPUT ( EXT 3 ).

An S in the display e.g.

o 2S ( EXT 2S ), indicates the input is set for an S-Video signal.

b

In the SETUP menu press b to select Manual

Settings and press

Q

.

c

Press B or b to tune Skip on and press

Q

.

Manual Settings

Skip: On

HDMI 1 d

Press EXIT .

The skip on input is greyed out in the Inputs selection window and skipped over when you press o on the remote control.

Input selection

Use the Input Selection window if the television does not switch over automatically.

a

At any time by pressing o on the remote control or

TV, a list will appear on screen showing all inputs and external equipment.

Pressing o on the remote control

Pressing o on the TV right side panel

Inputs

TV

1

2

3C

HDMI 1

HDMI 2

HDMI 3

HDMI 4

PC

Inputs

DTV TV

DTV RADIO *

DTV TEXT *

1

2

3C

HDMI 1

HDMI 2

HDMI 3

HDMI 4

PC

ATV

* If radio or text channels are currently available for DTV.

HDMI™ displays equipment connected to Input HDMI on the back or side of the television.

PC displays a computer connected to Input RGB / PC on the back of the television.

External input skip

This is the feature to make the operation of input selection more convenient.

a

Press o to select the external input to be skipped (e.g.

HDMI 1).

INPUT signal selection

This specifies the type of signal going into SCART 2 ( EXT 2 ) on the back of the television. Please refer to the manufacturer’s instructions for the connected equipment.

a

In the SETUP menu press b until AV Connection is highlighted, then press

Q

.

b

With C or c select either AV or S-VIDEO as the required input for EXT 2 .

AV Connection

PC/HDMI 1 Audio

HDMI 1 Audio

HDMI Settings

EXT 2 Input

Digital Audio Output

PC

Auto

AV

Auto

If video colour is absent, try the alternative setting.

PC Audio

In order to receive sound from a connected PC, plug the audio cable into the back of the television (as shown in ‘Connecting a computer’ section), then use the PC/HDMI 1 Audio setting.

a

In the SETUP menu press b until AV Connection is highlighted, then press

Q

.

b

Highlight PC / HDMI 1 Audio then use c to select the

PC option.

NOTE: Selecting the PC option will force HDMI1 Audio to Digital mode.

39

00GB_RV635D_Euro.book Page 40 Wednesday, July 8, 2009 9:43 AM

CONTROLS AND FEATURES

HDMI 1 Audio

If the connected HDMI source does not support digital audio, plug the audio cable into PC/HDMI 1 (AUDIO) on the back of the television (as shown in the ‘Connecting an HDMI™ or DVI device to the HDMI input’ section), then use the HDMI 1 Audio setting.

a

In the AV Connection menu press b to highlight PC/

HDMI 1 Audio and using c select HDMI 1 .

b

Then highlight HDMI 1 Audio and using C or c select

Auto or Analogue .

AV Connection

PC/HDMI 1 Audio

HDMI 1 Audio

HDMI Settings

EXT 2 Input

Digital Audio Output

HDMI 1

Auto

AV

Auto

If the sound is missing select an alternative setting.

NOTE: HDMI 1 supports digital and analogue sound,

HDMI 2, HDMI 3 and HDMI 4 are digital sound only.

Certain DVD disk formats may not output from this TV

(32/44.1/48kHz and 16/20/24 bits are acceptable).

c

Press B or b to select option, then press C or c to select the settings.

HDMI Settings

Lip Sync

INSTAPORT TM

RGB Range

On

On

Auto

• Lip Sync: On

This option activates an auto audio/video display timing adjustment function that allows HDMI source devices to accurately perform synchronization automatically.

All above HDMI settings need proper HDMI source device.

If HDMI source products does not support these features, the television may not work properly by activating these features.

• INSTAPORT™: On

This feature reduces the lag of switching time when switching HDMI sources.

• RGB Range: Auto

This feature adjusts RGB full range signal automatically.

When Limited is selected, RGB output signal is output in the range from 16 to 235. When Full is selected, RGB output signal is output in the range from 0 to 255.

NOTE: If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50Hz or supports Deep Colour, you will need a Category 2 cable.

Conventional HDMI/DVI cables may not work properly with this mode.

HDMI Settings

Some early HDMI equipment may not work properly with your

HDMI TV, please unplug your HDMI cable first and then try setting the Lip Sync and INSTAPORT™ options to Off .

Adjusting these settings should allow your early HDMI source to operate properly with your television.

a

In the SETUP menu press b until AV Connection is highlighted, then press

Q

.

b

Press b to highlight HDMI Settings and press

Q

.

NOTE: HDMI Settings is grayed out on non-HDMI inputs.

Digital Audio Output

When connecting a surround sound amplifier to the digital audio output (Sony/Philips Digital Interface Format

[S/PDIF]), the following options can be selected.

PCM: this mode outputs PCM format to the digital audio output socket.

Auto: this mode outputs Dolby Digital or PCM to the digital audio output socket providing it is being broadcast.

Dolby Digital S Dolby Digital

Dolby Digital Plus S Dolby Digital

MPEG S PCM a

In the AV Connection menu press b to select Digital

Audio Output .

b

Use C or c to select PCM or Auto .

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing,

LLC.

INSTAPORT™ and INSTAPORT logo are trademarks of Silicon

Image, Inc. in the United States and other countries.

40

00GB_RV635D_Euro.book Page 41 Wednesday, July 8, 2009 9:43 AM

TEXT SERVICES

Text services

This television has a multi-page text memory, which takes a few moments to load. It offers two

Modes

of viewing text – Auto will display Fastext , if available. LIST will save your four favourite pages.

Selecting modes

The text character set will be automatically chosen by the language setting in the SETUP menu.

a

Select Teletext from the PREFERENCES menu.

b

With C or c choose Auto or LIST then press EXIT .

PREFERENCES

Teletext

Panel Lock

Auto Format

4:3 Stretch

Blue Screen

Side Panel

TOSHIBA Illumination

Auto

Off

On

Off

On

1

On

Navigating pages using Auto

If Fastext is available four coloured titles will appear at the base of the screen.

To access one of the four given subjects, press the relevant coloured button on the remote control.

For further information on your particular text system(s), see the broadcast text index page or, consult your local Toshiba dealer.

Navigating pages using LIST

The four coloured choices at the bottom of the screen are numbers – 100, 200, 300 and 400, which have been programmed into the television’s memory. To view these pages press the relevant coloured buttons.

To change these saved pages press the relevant coloured button and enter the 3 digit number. This number will change in the top left of the screen and in the coloured highlight.

Press Q to save. Whenever Q is pressed all four page numbers showing at the bottom will be saved and the previous ones will be lost.

If Q is not pressed the selection will be forgotten when the channel is changed.

Other pages may be viewed by entering the 3 digit page number – but DO NOT press Q or these pages will be saved.

Text information

The TEXT button:

To view text services press TEXT . Press again to superimpose the text over a normal broadcast picture and again to return to normal viewing. Channels cannot be changed until text is cancelled.

The first text page shown will be the initial page.

Any text page can be accessed by entering the 3 digit page number using the numbered buttons, pressing the coloured buttons or pressing P U to advance to the next page and P u to go back to the previous page.

Sub-pages

The pages on the screen will dynamically update as sub-pages are received.

If you open a page containing sub-pages, the sub-pages are automatically displayed in sequence. To quit automatic subpage change, press C or c .

Once selected, the sub-page you are viewing will be highlighted and, as the television loads any additional subpages, the colour of the numbers will change, indicating that these pages have been loaded.

These sub-pages will remain available to view until another page is chosen or, in normal TV mode, the channel is changed.

41

00GB_RV635D_Euro.book Page 42 Wednesday, July 8, 2009 9:43 AM

TEXT SERVICES

Control buttons

Below is a guide to the functions of the remote control text buttons.

k To display the index/initial page:

Press k

to access the index/initial page. The one displayed is dependant on the broadcaster.

TEXT To display a page of text:

Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing. Channels cannot be changed until this has been done.

A To reveal concealed text:

To discover the solutions on quiz and joke pages press the

A button.

B To hold a wanted page:

At times it is convenient to hold a page of text. Press

B

and

B

will appear in the top left of the screen. The page will be held on screen until the button is pressed again.

C To enlarge the text display size:

Press

C

once to enlarge the top half of the page, press again to enlarge the bottom half of the page. Press again to revert to normal size.

D To select a page whilst viewing normal picture:

Enter the page number then press

D

, normal picture will be displayed. The television will indicate when the page is ready by changing the colour of the page number at the top of the screen. Press TEXT to view the page.

To display news flashes:

Select the news flash page for the chosen text service (see the index page of text service). The news flashes will be displayed as and when they are broadcast.

Remember to cancel text before changing channels - press the TEXT button twice.

42

00GB_RV635D_Euro.book Page 43 Wednesday, July 8, 2009 9:43 AM

PROBLEM SOLVING

Questions and Answers

Below are the answers to some of the most common queries.

For more information go to www.toshiba.co.uk

Q

A

Why is there no sound or picture?

Check the television is not in standby mode. Check the mains plug and all mains connections.

Q There is a picture, but why is there little or no colour?

A When using an external source, for instance, a poor quality video tape, if there is little or no colour, improvements may sometimes be achieved. The colour is factory set to Auto to automatically display the best colour system.

To check that you have the best colour: a

With the external source playing, select Manual

Settings from the SETUP menu.

Manual Settings

Colour System: Auto

EXT 2 A b

With B or b choose between Auto , PAL , SECAM ,

NTSC 4.43

or NTSC 3.58

.

Q Why doesn’t the video/DVD being played show on screen?

A Make sure the VCR or DVD player is connected to the television as shown on page 7, then select the correct input by pressing o .

Q Why is there a picture but no sound?

A Check all lead connections.

No sound or unacceptable format sound may be received.

Check the volume has not been turned down or that sound mute has not been selected.

Q Why is the VCR/DVD picture in black and white?

A Check the correct input has been chosen, S-VIDEO or

AV . See AV Connection on page 39.

Q What else can cause a poor picture?

A Interference or a weak signal. Try a different television station. Manual Fine Tuning may help.

a

Select the ATV Manual Tuning menu. Highlight the station and press

Q

, then press c to select Manual

Fine Tuning .

b

Using B or b adjust to get the best picture and sound.

Press

Q

and then EXIT .

ATV Manual Tuning

Manual Fine Tuning: 0

1 A C 9 0

Q Why don’t the controls of the television work?

A Check that Panel Lock is not On .

Q

A

Why doesn’t the remote control work?

Check that the mode switch on the remote control is in TV mode.

Check that the batteries aren’t dead or inserted incorrectly.

Q

A

Why is there a message permanently on the screen?

Remove it by pressing .

Q Why is the digital channel locked?

A The channel has been selected in Locked Channels

( see 'Digital Settings' section ).

Q

A

Why can only certain digital channels be viewed?

A Favourite list has been selected (see ' Favourite

Channels ' section), set the feature to All Channels or change channels by using the number buttons.

43

00GB_RV635D_Euro.book Page 44 Wednesday, July 8, 2009 9:43 AM

PROBLEM SOLVING

Q Why are some of the unavailable?

digital subscription channels

A Your subscription needs upgrading. Contact your service provider.

Q Why is the soundtrack in English when a different audio language has been selected?

A The programme is currently being broadcast with an

English soundtrack only.

Q

A

Why is there incorrect or no sound when in DTV mode?

Press s to ensure the hard of hearing option has not been selected.

Q What can be done if the PIN number has been forgotten?

A Use the Master PIN code of 1276, then change to a number of your choice. Ensure that no-one else can use the Master PIN by removing the Owner’s Manual.

Q

A

Why are there vertical stripes on the screen when in

PC mode?

The Sampling Clock may need adjustment. Select PC

Settings from the SETUP menu, highlight Sampling

Clock and adjust until the lines clear.

Q

A

Why are there horizontal stripes and/or blurred images on the screen when in PC mode?

The Clock Phase may need adjustment. Select PC

Settings from the SETUP menu, highlight Clock

Phase and adjust until the picture clears.

Q Why when digital subtitles have been selected are they not showing on screen?

A Subtitles are not currently being transmitted by the broadcaster.

Q

A

Why are there problems with analogue text?

Good performance of text depends on a good strong broadcast signal. This normally requires a roof or loft aerial. If the text is unreadable or garbled, check the aerial. Go to the main index page of the text service and look for the User Guide . This will explain the basic operation of text in some detail. If further information is needed on how to use text see the text section .

Q Why is a page number visible at the top of the screen but no text?

A Text has been selected but Teletext information is currently unavailable on the current source.

Q Why are the colours wrong when an NTSC source is played?

A Connect the source via a SCART lead and play.

Select Manual Settings from the SETUP menu.

a

Set the Colour to Auto and exit.

b

Go to the PICTURE menu and adjust the tint.

Q

A

Why don't the devices connected via HDMI operate properly?

Make sure to use cables with the HDMI logo

(see page 8).

Some early HDMI equipment may not work properly with the latest HDMI TV products, due to new standard adoption. Try the HDMI settings Lip Sync ,

INSTAPORT™ to Off .

44

00GB_RV635D_Euro.book Page 45 Wednesday, July 8, 2009 9:43 AM

Q Why are the LEDs on the front of the television flashing?

A Check the table below.

LED indication

LED-3 LED-2 LED-1

Orange

(Solid)

Green

(Solid)

Green

(Solid)

Red

(Solid)

OFF

Orange

(Solid)

Red

(Solid)

OFF

Orange

(Solid)

Red

(Solid)

OFF

Orange

(Solid)

Red

(Solid)

OFF

OFF

Green

(Solid)

Green

(Solid)

OFF

OFF

OFF

Green

(Solid)

Green

(Solid)

Green

(Solid)

OFF

OFF

OFF

OFF

Green

(Solid)

Green

(Solid)

Green

(Solid)

Green

(Solid)

Green

(Solid)

Red

(Solid)

Red

(Solid)

Red

(Solid)

Red

(Solid)

Red

(Solid)

Red

(Solid)

Red

Blinks

Condition Solution

Power ON

On Timer is set

Program Timer is set

Power ON

On Timer is set

Program Timer is working

Power ON

On Timer is set

Program Timer is

NOT set

Power ON

On Timer is NOT set

Program Timer is set

Power ON

On Timer is NOT set

Program Timer is working

Power ON

On Timer is NOT set

Program Timer is

NOT set

Power OFF (Standby)

On Timer is set

Program Timer is set

Power ON (Standby)

On Timer is set

Program Timer is working

Power OFF (Standby)

On Timer is set

Program Timer is

NOT set

Power OFF (Standby)

On Timer is NOT set

Program Timer is set

Power ON (Standby)

On Timer is NOT set

Program Timer is working

Power OFF (Standby)

On Timer is NOT set

Program Timer is

NOT set

Power protect detection.

Turn OFF the TV and unplug the power cord. Plug the power cord in again and turn

ON the TV.

45

PROBLEM SOLVING

LED-3

LED-2

LED-1

00GB_RV635D_Euro.book Page 46 Wednesday, July 8, 2009 9:43 AM

INFORMATION

License Information

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT

PORTFOLIO LICENSE FOR THE PERSONAL AND

NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE

VIDEO IN COMPLIANCE WITH THE AVC STANDARD

(“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO

THAT WAS ENCODED BY A CONSUMER ENGAGED IN

A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/

OR WAS OBTAINED FROM A VIDEO PROVIDER

LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS

GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.

ADDITIONAL INFORMATION MAY BE OBTAINED

FROM MPEG LA, L.L.C.

SEE HTTP//WWW.MPEGLA.COM

Cleaning the screen and cabinet…

Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.

Disposal…

The following information is only for EU-member states:

Disposal of products

The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres.

The black bar indicates that the product was placed on the market after August 13, 2005.

By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health.

For more detailed information about the collection and recycling programmes available in your country, please contact your local city office or the shop where you purchased the product.

Disposal of batteries and/or accumulators

The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste.

If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury

(Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.

By participating in separate collection of batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health.

For more detailed information about the collection and recycling programmes available in your country, please contact your local city office or the shop where you purchased the product.

46

00GB_RV635D_Euro.book Page 47 Wednesday, July 8, 2009 9:43 AM

For your own records

INFORMATION

47

00GB_RV635D_Euro.book Page 48 Wednesday, July 8, 2009 9:43 AM

INFORMATION

Information

Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.

Signal information for Mini D-sub 15 pin connector

Pin No.

1

2

3

4

5

* NC = not connected

Signal name

R

G

B

NC*

NC

Pin No.

6

7

8

9

10

Signal name

Ground

Ground

Ground

NC

Ground

Pin No.

11

12

13

14

15

Signal name

NC

NC

H-sync

V-sync

NC

Acceptable PC signals through the PC terminal

Format

VGA

SVGA

XGA

WXGA

SXGA

Resolution

640 × 480

800 × 600

1024 × 768

1280 × 768

1360 × 768

1280 × 1024

V. Frequency

59.940Hz

72.809Hz

75.000Hz

56.250Hz

H. Frequency

31.469kHz

Pixel Clock Frequency

25.175MHz

37.861kHz

31.500MHz

37.500kHz 31.500MHz

35.156kHz

36.000MHz

60.317Hz

72.188Hz

75.000Hz

60.004Hz

37.879kHz 40.000MHz

48.077kHz

50.000MHz

46.875kHz

48.363kHz

49.500MHz

65.000MHz

70.069Hz

75.029Hz

56.476kHz

59.995Hz 47.396kHz

59.870Hz 47.776kHz

75.000MHz

60.023kHz 78.750MHz

68.250MHz

79.500MHz

74.893Hz

60.015Hz

60.020Hz

60.289kHz

47.712kHz

63.981kHz

102.250MHz

85.500MHz

108.000MHz

NOTE: Depending on the connected PC, one of the following may occur; incorrect display, false format detection, picture position failure, blur, or judder. But this is not a malfunction of your TV.

48

00GB_RV635D_Euro.book Page 49 Wednesday, July 8, 2009 9:43 AM

INFORMATION

Acceptable video or PC signals through the HDMI terminals

Format

480i

576i

480p

576p

1080i

1080i

720p

720p

1080p

1080p

1080p

VGA

SVGA

XGA

WXGA

SXGA

Resolution

720 × 480i

720 × 576i

720 × 480p

720 × 576p

1920 × 1080i

1920 × 1080i

1280 × 720p

1280 × 720p

1920 × 1080p

1920 × 1080p

1920 × 1080p

640 × 480

800 × 600

1024 × 768

1280 × 768

1360 × 768

1280 × 1024

V. Frequency

59.940/60.000Hz

50.000Hz

59.940/60.000Hz

50.000Hz

59.940/60.000Hz

50.000Hz

59.940/60.000Hz

50.000Hz

59.940/60.000Hz

50.000Hz

24.000Hz

59.940Hz

H. Frequency

15.734/15.750kHz

15.625kHz

31.469/31.500kHz

31.250kHz

33.716/33.750kHz

28.125kHz

44.955/45.000kHz

37.500kHz

67.500kHz

56.250kHz

27.000kHz

31.469kHz

Pixel Clock Frequency

27.000/27.027MHz

27.000MHz

27.000/27.027MHz

27.000MHz

74.176/74.250MHz

74.250MHz

74.176/74.250MHz

74.250MHz

148.500MHz

148.500MHz

74.250MHz

25.175MHz

72.809Hz

75.000Hz

56.250Hz

60.317Hz

72.188Hz

75.000Hz

60.004Hz

70.069Hz

37.861kHz

31.500MHz

37.500kHz 31.500MHz

35.156kHz

36.000MHz

37.879kHz 40.000MHz

48.077kHz

46.875kHz

48.363kHz

56.476kHz

50.000MHz

49.500MHz

65.000MHz

75.000MHz

75.029Hz

59.995Hz

60.023kHz 78.750MHz

47.396kHz

59.870Hz 47.776kHz

74.893Hz

60.289kHz

68.250MHz

79.500MHz

102.250MHz

60.015Hz

60.020Hz

47.712kHz

63.981kHz

85.500MHz

108.000MHz

49

00GB_RV635D_Euro.book Page 50 Wednesday, July 8, 2009 9:43 AM

INFORMATION

Specifications and accessories

DVB-T Broadcast systems/channels Broadcast systems/channels

UK UHF 21-68 PAL-I UHF UK21-UK69

France VHF 05-10 (VHF 01-05)

UHF 21-69

PAL-B/G

SECAM-L Germany

Austria

VHF 05-12

UHF 21-69

VHF 05-12

UHF 21-69

Switzerland VHF 05-12

UHF 21-69

UHF E21-E69

VHF E2-E12, S1-S41

UHF F21-F69

VHF F1-F10, B-Q

SECAM-D/K UHF R21-R69

VHF R1-R12

Italy VHF 05-12 (D,E,F,G,H,H1,H2)

UHF 21-69

Spain

Greece

UHF 21-69

Nederlands VHF 05-12

UHF 21-69

VHF 05-12

UHF 21-69

Video Input PAL, SECAM, NTSC 3.58/4.43

External connections

EXT 1 Input/Output 21-pin SCART

EXT 2

EXT 3

EXT 3

HDMI 1/2/3

HDMI 4

Input/Output

Input

Input (Side)

Input

Input (Side)

21-pin SCART

Phono jacks

Phono jacks

RGB, A/V

(AV out: TV out)

A/V, S-video

(AV out: TV out)

Y, P

B

/C

B

, P

R

Audio L + R

/C

R

Phono jack

Phono jacks

Video, S-video

Audio L + R

HDMI™ (Audio LIP SYNC, INSTAPORT™,

RGB Range supported)

HDMI™ (Audio LIP SYNC, INSTAPORT™,

RGB Range supported)

PC Input

PC/HDMI 1 Audio

Mini D-sub 15-pin Analogue RGB signal

3.5mm mini jack Audio

Digital Audio Output (S/PDIF) Optical

USB port USB class: Mass Storage

File system: FAT12/16/32

Stereo Nicam

2 carrier system

Visible Screen Size

(approx.)

Model 32

37

42

Display 16:9

80cm

94cm

107cm

Sound output

(at 10% distortion)

Main 10W + 10W

Power consumption

(approx.)

Model 32 AV

37 AV

42 AV

32 RV

37 RV

42 RV

118W

152W

205W

96W

124W

144W

Standby Model 32 AV

37 AV

42 AV

32 RV

37 RV

42 RV

0.8W

0.8W

0.7W

0.8W

0.8W

0.8W

Dimensions

(approx.)

Weight (approx.)

Headphone socket

Model 32 AV 57cm (H) 79cm (W) 25cm (D)

37 AV 63cm (H) 90cm (W) 25cm (D)

42 AV 69cm (H) 101cm (W) 26cm (D)

32 RV 57cm (H) 79cm (W) 26cm (D)

37 RV 64cm (H) 90cm (W) 26cm (D)

42 RV 69cm (H) 101cm (W) 31cm (D)

(Height dimension includes foot stand)

Model 32 AV

37 AV

42 AV

32 RV

37 RV

42 RV

13.0kg

16.0kg

20.5kg

15.5kg

19.5kg

23.5kg

3.5mm stereo

Operating condition

Accessories

Temperature 5°C - 35°C (41°F - 94°F)

Humidity 20% - 80% (non-condensing)

Remote control

2 batteries (AAA, IEC R03 1.5V)

Clip

Cleaning cloth (to clean the cabinet and control panel)

DVB is a registered trademark of the DVB Project

50

© Toshiba Information Systems (U.K.) Limited

All rights reserved.

Reproduction in whole or part without written permission is strictly prohibited.

Toshiba Information Systems (UK) Ltd

Consumer Products Division,

Weybridge Business Park,

Addlestone Rd,

Weybridge, Surrey, UK

KT15 2UL

Specification is subject to change without notice.

T 1

advertisement

Related manuals

advertisement

Table of contents