Epson Stylus Pro 9700 Guide

Add to my manuals
39 Pages

advertisement

Epson Stylus Pro 9700 Guide | Manualzz

Epson Stylus

®

Pro 7700/9700

Network Guide

Copyright and Trademarks

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson

Corporation’s operating and maintenance instructions.

Seiko Epson Corporation and its affiliates shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as

Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

Info-ZIP copyright and license

This is version 2007-Mar-4 of the Info-ZIP license. The definitive version of this document should be available at ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely and a copy at http://www.info-zip.org/pub/infozip/license.html.

Copyright © 1990-2007 Info-ZIP. All rights reserved.

For the purposes of this copyright and license, “Info-ZIP” is defined as the following set of individuals:

Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup Gailly,

Hunter Goatley, Ed Gordon, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert

Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der Linden,

Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg

Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith, Steven M. Schweda, Christian

Spieler, Cosmin Truta, Antoine Verheijen, Paul von Behren, Rich Wales, Mike White.

2

Copyright and Trademarks

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the above disclaimer and the following restrictions:

Redistributions of source code (in whole or in part) must retain the above copyright notice, definition, disclaimer, and this list of conditions.

Redistributions in binary form (compiled executables and libraries) must reproduce the above copyright notice, definition, disclaimer, and this list of conditions in documentation and/or other materials provided with the distribution. The sole exception to this condition is redistribution of a standard UnZipSFX binary (including SFXWiz) as part of a self-extracting archive; that is permitted without inclusion of this license, as long as the normal SFX banner has not been removed from the binary or disabled.

Altered versions--including, but not limited to, ports to new operating systems, existing ports with new graphical interfaces, versions with modified or added functionality, and dynamic, shared, or static library versions not from Info-ZIP--must be plainly marked as such and must not be misrepresented as being the original source or, if binaries, compiled from the original source. Such altered versions also must not be misrepresented as being

Info-ZIP releases--including, but not limited to, labeling of the altered versions with the names “Info-ZIP” (or any variation thereof, including, but not limited to, different capitalizations), “Pocket UnZip,” “WiZ” or “MacZip” without the explicit permission of

Info-ZIP. Such altered versions are further prohibited from misrepresentative use of the

Zip-Bugs or Info-ZIP e-mail addresses or the Info-ZIP URL(s), such as to imply Info-ZIP will provide support for the altered versions.

Info-ZIP retains the right to use the names “Info-ZIP,” “Zip,” “UnZip,” “UnZipSFX,” “WiZ,”

“Pocket UnZip,” “Pocket Zip,” and “MacZip” for its own source and binary releases.

Trademarks

Epson and Epson Stylus are registered trademarks, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

© 2009 Epson America, Inc. 11/09 CPD-27725

Copyright and Trademarks

3

Contents

Chapter 1

Introduction

About Your Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Warnings, Cautions, and Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Features of the Network Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Network Interface Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Status lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Network connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

About the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Terms and Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 2

Setting Up Your System for Network Printing

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installing Network Components on Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Windows 7 and Windows Vista . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Setting Up the Network Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connecting the Network Interface to the Network . . . . . . . . . . . . . . . . . . . . . . . . . 16

Configuring the Network Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Printing a Network Status Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Installing the Printer Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Adding the Network Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Chapter 3

Network Software

EpsonNet Config for Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

About EpsonNet Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Accessing the EpsonNet Config User’s Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

EpsonNet Config for Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4

About EpsonNet Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Accessing the EpsonNet Config User’s Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

EpsonNet Config with Web Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

About EpsonNet Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Configuring the Network Interface Using EpsonNet Config With a Web Browser . 29

Opening Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Chapter 4

Troubleshooting

General Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Chapter 5

Uninstalling Software

Windows 7 and Windows Vista . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Windows XP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Mac OS X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Index

5

Chapter 1

Introduction

About Your Printer

Your printer has a built-in Ethernet interface and can connect anywhere on your network using 10Base-T or 100Base-TX. The built-in Ethernet interface automatically selects the correct link speed and network protocols when it connects to the network.

The network interface supports multiple protocols and automatically detects the protocols being used on your network. You can print from Microsoft

®

Windows

®

and Mac OS

®

X applications.

If you want to configure the network interface to use TCP/IP and SNMP network protocols, use EpsonNet Config. The configuration utility is provided with your printer, and allows you to quickly and easily configure the network interface.

Note:

The EpsonNet Config utility configures the network interface to work only with protocols that exist on your network. This does not imply that you can use all of the above-mentioned protocols on your network or operating system. The protocols that the network interface can use may vary depending on the operating system and the network configuration.

About This Guide

This

Network Guide

contains information about using the network interface on a network. It includes how to set up the network interface, install the configuration software, and configure your printer and computer network settings.

For information about your printer, see your

User’s Guide

.

6

Introduction

Note:

This guide is written for network administrators, and many of the steps included in this guide require detailed network knowledge and administrator rights.

The term “network administrator” in this guide refers to the person responsible for maintaining the network. “Administrator” is synonymous with “Supervisor.”

The term “network interface” refers to the built-in Ethernet interface of the printer in this guide.

Some screen shots in this guide may list a printer name other than your printer.

This does not alter the instructions.

Warnings, Cautions, and Notes

w

Warnings

must be followed carefully to avoid bodily injury.

c

Cautions

must be observed to avoid damage to your equipment.

Notes

contain important information and useful tips on the operation of your printer.

Operating Environment

The network interface supports the following environments.

OS

Windows 7

Windows Vista

®

Windows XP (Home, Professional)

Mac OS X 10.6

Mac OS X 10.5

Mac OS X 10.4.11

Protocol

TCP/IP (using LPR, Standard TCP/IP Port)

Bonjour and TCP/IP

Introduction

7

Features of the Network Interface

Connects your Epson printer using a built-in Ethernet interface, which is called the network interface in this manual, to the network.

Supports multiple protocols, such as TCP/IP and Bonjour.

Supports both 10Base-T and 100Base-TX.

Supports DHCP.

Supports Automatic Private IP Addressing (APIPA) that assigns an IP address automatically to the network interface even if there is no DHCP server on the network.

Supports the Dynamic DNS function.

Supports SNMP.

Supports SNTP (Simple Network Time Protocol).

Supports Bonjour on Mac OS X 10.4.11 or later.

8

Introduction

Network Interface Operation

Status lights

The status lights provide you with important information on the operation of the network interface.

Flashes when data is transmitted or received type

The light on the left indicates whether the network interface is connected to a

10Base-T (green) or 100Base-TX (orange) network.

The light on the right flashes when data is being transmitted or received.

If the light on the left is solid green and the light on the right is off, the printer is not connected to the network.

Network connector

The RJ-45 connector is used to connect an Ethernet cable to a network. You can use an Ethernet cable for both 10Base-T and 100Base-TX.

c

Caution:

You must use a Category-5 or higher shielded twisted-pair cable to connect the network interface to a network.

Introduction

9

About the Software

The software CD provided with your printer includes the following network software.

EpsonNet Config for Windows is a Windows-based configuration utility

that allows you to configure the network interface. See “EpsonNet Config for Windows” on page 26.

EpsonNet Config for Macintosh is a Macintosh-based configuration utility

that allows you to configure the network interface. See “EpsonNet Config for Macintosh” on page 27.

EpsonNet Config with Web Browser is a web-based configuration utility

that allows you to configure the network interface. See “EpsonNet Config with Web Browser” on page 27.

Terms and Concepts

Configuration -- a prepared set of conditions for proper operation of a device.

Configuring the network interface is to prepare it to work with protocols available on a network.

DHCP -- a dynamic host configuration protocol. It is a protocol that assigns dynamic IP addresses to devices on a network.

Protocol -- a rule that controls how data or information is exchanged through a network. Computers and software cannot communicate with each other using different protocols.

TCP/IP -- Transmission Control Protocol/Internet Protocol, a layer of protocols that provides communication between nodes on a network.

10

Introduction

Chapter 2

Setting Up Your System for Network Printing

Overview

This section describes the general procedure on how to set up the network interface.

1. Check the network interface operation.

Check the functions and operations of the network interface, such as the

status lights. See “Network Interface Operation” on page 9 for details.

2. Install the necessary network components on your computers.

Make sure that the necessary network components (such as TCP/IP) are installed on your computers, and network settings (such as the IP address, subnet mask, etc.) are set.

3. Connect the network interface to the network.

Connect the network interface to the network. See “Connecting the

Network Interface to the Network” on page 16 for details.

4. Configure the network interface and install the printer driver.

See “Configuring the Network Interface” on page 17 for details.

5. If necessary, configure the network settings of the network interface using

EpsonNet Config.

Configure the network interface using EpsonNet Config. For Windows

users, see “About EpsonNet Config” on page 26. For Macintosh users, see

“About EpsonNet Config” on page 27.

Setting Up Your System for Network Printing

11

Installing Network Components on Your Computer

Before configuring the network interface and printing from the computer, you need to install the necessary network components (such as TCP/IP) and assign an IP address and subnet mask for your computer, depending on the printing method you want to use. See the section in this chapter appropriate for your operating system.

Windows 7 and Windows Vista

For Windows 7 and Windows Vista, use the following procedure to install the necessary components.

Note:

The Windows operating system CD may be required during the installation.

When using TCP/IP for printing, you need to set the IP address, the subnet mask, and the default gateway of the computer.

click , and then click

View network status and tasks

or double-click

Network and Sharing Center

.

2. Click

Local Area Connection

(Windows 7) or

View Status

(Windows

Vista), and then click the

Properties

button.

Note:

If you see the User Account Control screen, click

Yes

or

Continue

.

12

Setting Up Your System for Network Printing

3. Check if the following network components are in the list. If they are

already installed, go to “Connecting the Network Interface to the Network” on page 16.

The following table lists the network components required for configuring the network interface with EpsonNet Config.

EpsonNet Config’s setting screens

TCP/IP, SNMP (IP tra p )

Necessary components

Internet Protocol (TCP/IP)

The following table lists the network components required for network printing.

Printing method

LPR p rinting

Necessary components

Internet Protocol (TCP/IP)

4. If the necessary components are not in the list, click

Install

to install them.

5. Double-click

Internet Protocol Version 4 (TCP/IPv4)

on the Local Area

Connection Properties dialog box to open the Internet Protocols Version 4

(TCP/IPv4) Properties dialog box. Set the IP address, the subnet mask, etc. and then click

OK

.

6. Restart the computer.

Setting Up Your System for Network Printing

13

The necessary components are now installed. Go to the section “Connecting the Network Interface to the Network” on page 16.

Windows XP

For Windows XP, use the following procedure to install the necessary components.

Note:

The Windows XP CD may be required during the installation.

1. Click

Start

, select

Control Panel

, and then select

Network Connections

.

2. Under

LAN or High-Speed Internet

, right-click the

Local Area

Connection

icon and choose

Properties

.

3. Check if the following network components are in the list. If they are

already installed, go to “Connecting the Network Interface to the Network” on page 16.

The following table lists the network components required for configuring the network interface with EpsonNet Config.

EpsonNet Config’s setting screens

TCP/IP, SNMP (IP tra p )

Necessary components

Internet Protocol (TCP/IP)

14

Setting Up Your System for Network Printing

The following table lists the components required for network printing.

Printing method

LPR p rinting

Necessary components

Internet Protocol (TCP/IP)

4. If the necessary components are not in the list, click

Install

to install them.

5. For LPR printing:

Double-click

Internet Protocol (TCP/IP)

on the Local Area Connection

Properties dialog box to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP address, the subnet mask, etc. and then click

OK

.

6. Restart the computer.

The necessary components are now installed. Go to the section “Connecting the Network Interface to the Network” on page 16.

Mac OS X

To assign an IP address, subnet mask, etc. to your Macintosh, follow the steps below.

1. From the Apple menu, select

System Preferences

.

2. Open the

Network

control panel. Click the

TCP/IP

tab.

Note:

For Mac OS X 10.6 and 10.5, select

Ethernet

as the connecting method on the

Network control panel, select the method to assign the IP address from the

Configure menu, and then assign the IP address.

3. Select

Built-in Ethernet

from the Show pull down menu.

4. Assign an IP address and other settings if necessary.

5. Click the

Apply Now

button to save any changes.

Go to the section “Connecting the Network Interface to the Network” on page 16.

Setting Up Your System for Network Printing

15

Setting Up the Network Interface

Connecting the Network Interface to the Network

Follow the instructions below to connect the network interface to the network.

1. Make sure that your printer is turned off.

2. Connect one end of the network cable to the RJ-45 connector on the network interface, and the other end to the network.

c

Caution:

You must use a Category 5 or higher shielded twisted-pair cable to connect the network interface to prevent malfunction.

Do not connect or disconnect the network cable when the printer is on.

Note:

You can use both 10Base-T and 100Base-TX. When you print a lot of data, we recommend using the highest speed available for your product with light network traffic.

3. Turn on your printer.

Note for Mac OS X:

Since the printer supports Bonjour and is on by default, you can use the printer on a network just by connecting it to the network. If you want to disable the Bonjour

setting, use the printer’s control panel. See “Configuring the Network Interface” on page 17 for details.

Now you can configure the network interface to use TCP/IP on the network and print a network status sheet.

16

Setting Up Your System for Network Printing

Configuring the Network Interface

After connecting the printer to the network, you need to configure the network interface for use on a TCP/IP network. The following items are used to make network settings on the printer’s control panel (available only when

NETWORK SETUP

is set to

ENABLE

):

Item

NETWORK SETUP

IP ADDRESS SETTING

IP,SM,DG SETTING

APPLE TALK

MS NETWORK

BONJOUR

INIT NETWORK SETTING

Parameter

DISABLE, ENABLE

AUTO, PANEL

IP ADDRESS

000.000.000.000 to 255.255.255.255

(default setting is 192.168.192.168)

SUBNET MASK

000.000.000.000 to 255.255.255.255

(default setting is 255.255.255.000)

DEFAULT GATEWAY

000.000.000.000 to 255.255.255.255

(default setting is 255.255.255.255)

ON, OFF

ON, OFF

ON, OFF

EXECUTE

Follow these steps to set the IP address, subnet mask, and default gateway from the control panel:

1. Make sure that the printer is turned on, and the LCD displays

READY

.

2. Press the

Menu

r

button on the printer to enter the printer’s menu system.

3. Press d

to highlight

NETWORK SETUP

, then press r

.

4. Press r

, then d

to highlight

ENABLE

.

5. Press

OK

. A checkmark (

) appears next to

ENABLE

to show that it’s selected.

6. Press l

to go back, then press d

to highlight

IP ADDRESS SETTING

.

Setting Up Your System for Network Printing

17

7. Press r

, then press u

or d

to choose one of the following IP configuration settings:

Choose

AUTO

if your network uses a DHCP server to provide IP addresses automatically. The printer’s IP address will be obtained from the DHCP server whenever the printer is reset or turned on.

Choose

PANEL

if you would like to set the printer’s IP settings manually.

8. Press

OK

. A checkmark (

) appears next to the setting you selected.

9. Press l

to go back, then do one of the following:

If you selected

AUTO

as the IP address setting, press the Pause/

Reset button to exit the printer menu. Then continue with step 14.

If you selected

PANEL

as the IP address setting, continue with step 10.

10. Press d

to highlight

IP,SM,DG SETTING

, then press r

. The LCD displays the IP address.

11. Press u

or d

to change each octet value, then press r

to select the next octet. When you have changed the value of the last octet, press r

. The

LCD displays the subnet mask.

12. Press u

or d

to change each octet value, then press r

to select the next octet. When you have changed the value of the last octet, press r

. The

LCD displays the default gateway.

13. Press u

or d

to change each octet value, then press r

to select the next octet. When you have changed the value of the last octet, press

OK

and then press the Pause/Reset button to exit the printer menu.

14. Turn the printer off then back on again.

c

Caution:

After turning off the printer, wait until the status lights go off before turning it back on; otherwise the network interface may not work correctly.

15. See “Printing a Network Status Sheet” below to print a network status

sheet and confirm the new IP address. For Windows, you’ll need the IP address during setup. You can also use the EpsonNet Config software to obtain the IP address.

18

Setting Up Your System for Network Printing

Now you can install the printer software (see “Installing the Printer Software” on page 20).

Printing a Network Status Sheet

1. Make sure that the printer is not printing and the LCD displays

READY

.

2. Press the

Menu

r

button on the printer’s control panel to enter the printer’s menu system.

3. Press d

to highlight

TEST PRINT

, then press r

.

4. Press d

to highlight

NETWORK STATUS SHEET

, then press r

.

5. Press

OK

to print the network status sheet.

Setting Up Your System for Network Printing

19

Installing the Printer Software

To print to the network printer, you need to install the printer driver (printer software) on your computer. See the appropriate section below for your operating system.

Windows

1. Insert the printer software CD in your CD or DVD drive.

2. If the AutoPlay window appears, click

Run Setup.exe

. If you see the User

Account Control screen, click

Yes

or

Continue

.

3. Select your product, then click

Install

.

20

Setting Up Your System for Network Printing

4. When you see a screen like this one, click the

Manual

button.

5. Select

LPT1:

as the printer port, then click

OK

.

6. Follow the on-screen instructions to install all necessary software and manuals, place a link to the Epson Professional Imaging website on your desktop, and register your printer.

7. When you’re done, click

Exit

and eject the CD. Restart your computer if prompted.

See “Adding the Network Port” on page 23 to create a network port for your

printer.

Setting Up Your System for Network Printing

21

Mac OS X

1. Insert the printer software CD in your CD or DVD drive.

2. Double-click the

Epson

icon.

3. Select your product, then click

Install

.

4. Follow the on-screen instructions to install all necessary software and manuals, place a link to the Epson Professional Imaging website on your desktop, and register your printer.

5. When you’re done, click

Exit

and eject the CD. Restart your computer if prompted.

See “Adding the Network Port” on page 23 to create a network port for your

printer.

22

Setting Up Your System for Network Printing

Adding the Network Port

After installing the printer software on your computer, you need to add the network port. See the appropriate section below for your operating system.

Windows

1. Click

Start

or , click

Control Panel

, and then click

View Devices and

Printers

(Windows 7),

Printer

or

Printers

(Windows Vista), or

Printers and Faxes

(Windows XP).

2. Right-click the Epson Stylus Pro 7700 or 9700 and select

Printer

Properties

or

Properties

.

3. Click the

Ports

tab, then click

Add Port

.

4. Select

Standard TCP/IP Port

, then click the

New Port

button.

5. When the printer port wizard opens, click

Next

.

Setting Up Your System for Network Printing

23

6. Enter the printer’s IP address, shown on the network status sheet, in the

Printer Name or IP Address text box. Then click

Next

.

Note:

If you get the IP address from the printer’s control panel, be sure to omit any leading zeros when entering it in the screen above. Example: 192.168.010.193 should be entered 192.168.10.193.

7. On the next screen, click

Finish

.

Note:

If the finish screen does not appear, the IP address may be incorrect or there may not be a good Ethernet connection. Check the IP address and the status light on the printer.

You can now use the printer on your network.

24

Setting Up Your System for Network Printing

Mac OS X

See the section below for your printing method.

Bonjour Printing

1. Open

System Preferences

.

2. Open

Print & Fax

.

3. Click the

+

button to add a new printer.

4. Select the printer model that is connected with Bonjour.

5. Click

Add

.

You can now use the printer on your network.

TCP/IP Printing

1. Open

System Preferences

.

2. Open

Print & Fax

.

3. Click the

+

button to add a new printer.

4. Select the EPSON TCP/IP printer model. (If you don’t see it listed, click

More Printers

(if available) and select

EPSON TCP/IP

from the drop down list.)

5. Click

Add

.

You can now use the printer on your network.

Setting Up Your System for Network Printing

25

Chapter 3

Network Software

This chapter explains how to use the network software provided with your printer.

EpsonNet Config for Windows

About EpsonNet Config

EpsonNet Config allows administrators to configure the network interface.

Note:

Be sure to use EpsonNet Config included on the software CD shipped with your printer.

Accessing the EpsonNet Config User’s Guide

The EpsonNet Config

User’s Guide

contains detailed information on

EpsonNet Config. Follow the steps below to access the EpsonNet Config

User’s Guide

.

1. Click

Start

, point to

Programs

or

All Programs

, select

EpsonNet

, and then select

EpsonNet Config

. Click

EpsonNet Config

to start it.

2. From the Help menu, select

EpsonNet Config Help

.

The EpsonNet Config

User’s Guide

appears. Click the links on the left side of the screen to get information on using EpsonNet Config.

26

Network Software

EpsonNet Config for Macintosh

About EpsonNet Config

EpsonNet Config allows administrators to configure the network interface.

Note:

Be sure to use EpsonNet Config included on the software CD shipped with your printer.

Accessing the EpsonNet Config User’s Guide

The EpsonNet Config

User’s Guide

contains detailed information on

EpsonNet Config. Follow the steps below to access the EpsonNet Config

User’s Guide

.

1. Double-click the

Macintosh HD

icon, if necessary. In the

Applications

folder, double-click the

EpsonNet

folder, and then double-click the

EpsonNet Config

folder. Finally, double-click the

EpsonNet Config

icon.

2. From the Help menu, select

EpsonNet Config Help

.

The EpsonNet Config

User’s Guide

appears. Click the links on the left side of the screen to get information on using EpsonNet Config.

EpsonNet Config with Web Browser

About EpsonNet Config

EpsonNet Config with Web Browser is a Web-based utility designed to configure the printer for use on a network.

By typing the IP address of the network interface for the URL in your browser, you can start EpsonNet Config to allow you to configure the network interface.

Note:

You must first set the IP address before using EpsonNet Config with Web Browser.

See “Configuring the Network Interface” on page 17.

Network Software

27

Supported Web Browsers

Windows:

Microsoft Internet Explorer

®

version 5.0 or later

Netscape Navigator version 7.0 or later

Firefox version 2.0 or later

Mac OS X:

Netscape Navigator version 7.0 or later

Apple

®

Safari

®

version 1.2 or later

Firefox version 2.0 or later

About Web Browser Settings

When running EpsonNet Config with Web Browser, do not use a proxy server to access the Internet. If the

Access the Internet using a proxy server

checkbox is selected, you cannot use EpsonNet Config with Web Browser.

Follow steps below to disable the Access the Internet using a proxy server setting.

1. Right-click the

Internet Explorer

icon on the desktop, and then select

Properties

.

2. Click the

Connection

tab.

3. Uncheck the

Access the Internet using a proxy server

checkbox.

28

Network Software

Configuring the Network Interface Using EpsonNet Config

With a Web Browser

After you have assigned an IP address to the network interface using the printer’s control panel, EpsonNet Config, or a DHCP server, you can configure the network interface using EpsonNet Config with Web Browser.

Note:

A Web browser must be installed on your computer.

TCP/IP must be correctly set for the computer and the network interface.

Follow the steps below to change the IP address using EpsonNet Config.

1. Turn on your printer.

2. Run EpsonNet Config in one of the following ways:

Run EpsonNet Config for Windows or Macintosh. Select the printer you want to configure from the list and then click

Launch Browser

.

Open your browser, and then type in the IP address of the network interface directly.

http://IP address of network interface/

Example:

http://192.168.100.201/

Note:

To check the IP address of the network interface, use EpsonNet Config. See

“About EpsonNet Config” on page 26 for Windows users, or see “About EpsonNet

Config” on page 27 for Macintosh users for details.You can also print a Network

Status Sheet from the printer’s control panel. See “Printing a Network Status

Sheet” on page 19 for instructions.

3. Click

TCP/IP

under Network on the Configuration menu to display the

TCP/IP setting screen.

4. Select a method for acquiring the IP address. When you select

Auto

,

DHCP becomes available and assigns an IP address automatically. If you want to set the IP address manually, select

Manual

.

Network Software

29

Note:

The network administrator must check any changes made to the IP address settings.

When

Auto

is selected, DHCP becomes available. A DHCP server/router must be available on your network.

If

Set Using Automatic Private IP Addressing (APIPA)

is enabled, a private

IP address is automatically assigned to the network interface even when there are no DHCP servers on your network.

If the Dynamic DNS function is not supported, we recommend that you select

Manual

and then enter an IP address. This is because if you select

Auto

, the

IP address of the network interface changes every time you turn on the printer so that you need to change the printer port setting accordingly.

5. To assign an IP address manually, enter the IP address, the subnet mask, and the default gateway. Be sure the IP address does not conflict with any other devices on the network.

Note:

If there is a server or a router functioning as a gateway, enter the IP address of the server or the router for the gateway address. If there is no gateway, leave the default values.

6. If you want to get a private address between 169.254.1.1 and

169.254.254.254 automatically when an IP address cannot be obtained by the DHCP server, leave the

Set Using Automatic Private IP Addressing

(APIPA)

setting set to

Enable

; otherwise, select

Disable

.

7. Select

Enable

for

Acquire DNS Server Address Automatically

if you want to acquire the DNS server address using the DHCP server.

If you want to enter the DNS server address manually, select

Disable

and then enter the IP address of the DNS server.

8. Select

Enable

for

Acquire Host Name and Domain Name

Automatically

if you want to acquire the host name and the domain name using the DHCP server.

If you want to specify manually, enter the host name and the domain name in the text boxes.

9. Select

Enable

for

Register Network Interface Address to DNS Server

if you want to register the host name and domain name to the DNS server through the DHCP server that supports Dynamic DNS.

30

Network Software

If you want to register the host name and the domain name directly to the

DNS server, select

Enable

for

Register Network Interface Address

Directly to DNS Server

.

10. Select

Enable

or

Disable

for

Use Universal Plug and Play

. Select

Enable

if you want to use the Universal Plug and Play function on

Windows Me or future operating systems.

11. Change the default Universal Plug and Play device name, if desired. This device name is used for Windows that supports the Universal Plug and

Play function.

12. Mac OS X only:

Select

Enable

or

Disable

for

Use Bonjour

. If you select

Enable

, enter the

Bonjour Name and the Bonjour Printer Name. If your network environment supports DHCP, you can use the printer on the network just by enabling this setting.

13. Click

Submit

and enter the password, if necessary, to update the settings.

Note:

If you have set the Administrator Name on the Administrator screen, enter the administrator name for the user name.

14. If the message “Configuration change is complete!” appears on your screen, the update is complete. Do not exit the Web browser and do not send a job to the printer until this message appears. Follow the on-screen instructions to reset the printer.

Note:

Since the new IP address becomes available after the printer is reset, you need to restart EpsonNet Config by entering the new IP address.

Only changes on the page where you press the

Submit

button take effect.

Network Software

31

Opening Screen

Any user can access Epson NetConfig with Web Browser by typing the IP address of the network interface for the URL in your browser.

Top Menu Bar

Home

Favorite

Hel p

About E p sonNet

Config

EPSON Logo

Menu

Links to the o p ening screen.

Links to a Web site p reviously defined by the administrator.

Links to Hel p .

Links to the co p yright and version information for E p sonNet

Config.

Links to the E p son Web site (htt p ://www.e

p son.com).

Information - Printer

Device Dis p lays the p rinter device information.

Consumables Dis p lays the consumables information.

Information - Network

General

TCP/IP

Dis p lays the network interface information.

Dis p lays information about TCP/IP.

SNMP Dis p lays information about SNMP.

Access Control Dis p lays information about Access Control.

Timeout

Time

Dis p lays information about Timeout.

Dis p lays information about Time.

EDM Dis p lays the EDM Agent information.

Configuration - Network

Ethernet

TCP/IP

Configure the desired settings for Ethernet.

Configure the desired settings/method for TCP/IP.

SNMP Configure the desired settings for SNMP.

Access Control Configure the desired settings for Access Control.

Timeout

Time

Configure the desired settings for Timeout.

Configure the desired settings for Time.

32

Network Software

Configuration - Optional

Administrator Ty p site.

e the name of the administrator and a link to a favorite Web

Reset

Password

Resets the

Set the p p rinter and returns to the default settings.

assword to p rotect settings.

Network Software

33

Chapter 4

Troubleshooting

General Problems

Cannot configure the network interface or cannot print from the network.

Cause

The p rinter settings or network settings may be wrong.

What to do

First, check to see if you can p rint a status sheet,

as described in “Printing a Network Status Sheet” on p age 19. If you can

p rint a status sheet, check the network settings.

Cannot print even if you have assigned the IP address to the computer and the printer.

Cause

You have assigned an IP address to the com p uter manually, but you assigned the IP address to the p rinter by

Automatic Private IP

Addressing (APIPA).

What to do

Use E p sonNet Config or the p rinter’s control p anel to assign the p rinter an IP address that belongs to the same segment as the com p uter.

Unable to start EpsonNet Config.

Cause

You have added or deleted p rotocols after installing

E p sonNet Config.

What to do

Uninstall E p sonNet Config and then reinstall it.

See “Uninstalling Software” on p age 36.

The message “EpsonNet Config cannot be used because no network is installed.” appears when you start EpsonNet Config.

Cause

TCP/IP is not installed on the com p uter.

TCP/IP is installed on the com p uter, but its IP address is not set correctly.

What to do

Install the TCP/IP p rotocol.

Set a correct IP address for the com p uter.

34

Troubleshooting

The message “Could not complete communicating configuration data” appears when you send settings to the network interface.

Cause

This may ha pp en when using a dial-u p router.

What to do

Run Command Prom p t from the com p uter on which E p sonNet Config is installed, and then enter the following command:

Format: >ROUTE_ADD_the IP address of the network interface_ the IP address of the com p uter (the under bar re p resents one s p ace)

Exam p le: >ROUTE ADD 192.168.192.168

22.33.44.55.

Unable to start EpsonNet Config with Web Browser.

Cause

You have not set the IP address for the network interface.

What to do

Set the IP address for the network interface using

E p sonNet Config or the p rinter’s control p anel.

You can check the IP address by p rinting a

network status sheet, see “Printing a Network

Status Sheet” on p age 19.

The Model Name and IP Address do not appear in the EpsonNet Config dialog box.

Cause

If a valid IP address is not set, the items indicated in the dialog box mentioned above may not a pp ear.

What to do

Set a valid IP address.

Refresh the status by selecting

Refresh

from the

View menu.

Increase the length of time before a timeout. To do this, select

Options

from the Tool menu, and then select

Timeout

. Note that doing so can cause E p sonNet Config to slowly.

Troubleshooting

35

Chapter 5

Uninstalling Software

Follow the steps below to uninstall the network software.

Windows 7 and Windows Vista

click , and then click

Uninstall a program

.

2. Select the utility you want to uninstall, and then click the

Uninstall/Change

button.

3. Follow the on-screen instructions to complete uninstallation.

Windows XP

1. Click

Start

, click

Control Panel

, and then click

Add or Remove

Programs

.

2. Click the

Change or Remove Programs

icon.

3. Select the utility you want to uninstall, and then click the

Change/Remove

button.

4. Follow the on-screen instructions to complete uninstallation.

Mac OS X

1. Insert the printer software CD in your CD or DVD drive.

2. Open the

Common

folder, then open the

EpsonNet Config

folder.

3. Double-click the

EpsonNet Config Installer

icon.

4. Click the

Continue

button.

36

Uninstalling Software

5. In the License dialog box, read the License Agreement, and then click the

Accept

button.

6. Select

Uninstall

from the pull down menu.

7. Click the

Uninstall

button.

8. Follow the on-screen instructions to complete uninstallation.

Note:

You can also uninstall EpsonNet Config by dragging the folder to the Trash.

Uninstalling Software

37

Index

I

A

Adding printer (Macintosh), 25

Automatic Private IP Addressing (APIPA),

30

IP address

control panel, 17 to 19

EpsonNet Config with Web Browser,

29 to 31

L

Lights, status, 9

B

Bonjour printing, 25

C

Cable, network, 9

Configuring network interface

control panel, 17 to 19

EpsonNet Config with Web Browser,

29 to 31

Connector, network, 9

Control panel, configuring network interface, 17 to 19

D

Default gateway, 18, 30

DHCP, 10

Dynamic DNS, 30

E

EpsonNet

Config (Web Browser), 27

EpsonNet Config

Macintosh, 27

Windows, 26

EpsonNet Config with Web Browser

password, 33 settings, 32 to 33

using, 29 to 33

M

Macintosh

adding printer, 25

Bonjour printing, 25

installing printer driver, 22

network settings, 15

TCP/IP printing, 25

N

Network

cable, 9 connector, 9

printing status sheet, 19

protocols, 6

Network interface

configuring, 17 to 19

connecting to network, 16

Network port

Windows, 23 to 24

Network software, uninstalling, 36 to 37

O

Operating environment, 7

Installing printer driver

Macintosh, 22

Windows, 20 to 21

P

Password, EpsonNet Config with Web

Browser, 33

Printer driver

installing in Macintosh, 22

installing in Windows, 20 to 21

38

Index

Problems, solving, 34 to 35

Protocols, 7

R

Resetting network interface, 33

RJ-45 connector, Network

connector, 9

Router, 30

S

Setting the IP address, 29

Software, uninstalling, 36 to 37

Status lights, 9

Status sheet, printing, 19

Subnet mask, 18, 30

T

TCP/IP, 29

definition, 10

setting up in Windows, 12 to 15

setting up on Macintosh, 15, 25

Troubleshooting, 34 to 35

U

Uninstalling network software, 36 to 37

Universal Plug and Play, 31

W

Windows

adding network port, 23 to 24

installing printer driver, 20 to 21

network settings, 12 to 15

Index

39

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals