RAB Lighting BTH250GPSQ Highbay Instructions

HIGH/LOW BAY GUARD INSTALLATION INSTRUCTIONS

Thank you for buying RAB lighting fi xtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.

Call the Marketing Department at 888-RAB-1000 or email: [email protected]

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE .

Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON

FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

WARNING: Make certain power is OFF before installing or maintaining fi xture. No user serviceable parts inside.

GUARD INSTALLATION

1. Remove Lamp prior to installing Guard.

2. Slide Guard onto socket till Clamp has reached top surface.

3. Insert Screw with washer (provided) through Clamp Hole .

4. Screw on Nut to tighten the Guard to Socket .

5. Insert and Tigthen Lamp through Guard opening.

6. Close Guard Cover by attaching Hooks onto Guard.

CAUTION: Be sure fixture temperature is cool enough to touch. Do not clean or maintain while fixture is energized.

Screw

Washer

Clamp

Bolt

Clamp

Hole

Guard

Socket

Guard

Cover

Hooks

Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation operation or maintenance.

Easy Installation & Product Help

©2014 RAB LIGHTING Inc.

Northvale, New Jersey 07647 USA

GDBW IN 0614

Tech Help Line

Call our experts 888 RAB-1000 rabweb.com

Visit our website for product info email

Answered promptly [email protected]