HAZXLED80F-DG
Project:
Prepared By:
Type:
Date:
Ceiling Mount HAZLED is a Class I, Division 2 LED fixture designed with 60 years of experience in hazardous location lighting.
Color: Gray Weight: 15.4 lbs
Driver Info
Type
120V
208V
240V
Constant Current
0.68A
0.40A
0.35A
277V 0.3A
Input Watts 81.40W
LED Info
Watts
Color Temp
80W
5000K (Cool)
Color Accuracy 72 CRI
L70 Lifespan 100,000 Hours
Lumens
Efficacy
6,056
74.4 lm/W
Technical Specifications
Hazardous Location Classifications
UL 844:
Electric lighting fixtures for use in hazardous
(classified) locations
UL 1598:
Electric lighting fixtures for use in nonhazardous locations
UL 8750:
Light Emitting Diode (LED) Light Sources for Use in Lighting Products
Hazardous Location Classifications:
Class I: A hazardous location in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable, such as petroleum refineries, aircraft hangars, dry cleaning plants, utility gas plants or storage areas for liquified petroleum or natural gas, and spray finishing areas.
Division 2: Abnormal condition, where igniteable concentrations of flammable gases, vapors or liquids are not like to exist under normal operating conditions, for example:
Closed storage drums containing flammable liquids in an inside storage room would not normall allow the hazardous vapors to escape into the atmosphere. But if one of the containers is leaking, you've got an abnormal condition.
Groups A - D: The gases and vapors of Class 1
LED Characteristics
LEDs:
Multi-chip, high-output, long-life LEDs
Color Stability:
LED color temperature is warrantied to shift no more than 200K in color temperature over a 5year period
Color Uniformity:
RAB's range of Correlated Color Temperature follows the guidelines of the American National
Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI
C78.377-2017.
Construction
Minimum Starting Temperature:
-40°C
IP Rating:
Ingress Protection rating of IP66 for dust and water
Thermal Management:
Superior heat sinking with external Air-Flow fins
Housing:
Die-cast aluminum housing, lens frame and mounting arm
Hardware:
All external hardware is stainless steel
Reflector:
Semi-specular aluminum
Need help? Tech help line: (888) 722-1000 Email: [email protected] Website: www.rablighting.com
Copyright © 2020 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice
Page 1 of 4
HAZXLED80F-DG locations are broken into four groups by the
Code: A,B,C, and D. These materials are grouped according to the ignition temperature of the substance, its explosion pressure, and other flammable characteristics.
Group A - The only substance in group A is acetylene because it is a gas with extremely high explosion pressures.
Group B - This group includes hydrogen and other materials with similar characteristics.
Group C & D - The most usual Class 1 groups.
They comprise the greatest percentage of all
Class I hazardous locations. Found in Group C is ethylene. Found in Group D are many of the most common flammable substances such as butane, gasoline, natural gas and propane.
Optical
BUG Rating:
B2 U3 G2
Need help? Tech help line: (888) 722-1000 Email: [email protected] Website: www.rablighting.com
Copyright © 2020 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice
Page 2 of 4
HAZXLED80F-DG
Technical Specifications (continued)
Construction
Lens/Globes:
Frosted globes
Mounting:
Ceiling mounting with (2) steel lugs
Conduit Entry:
3/4"
Gaskets:
Closed cell silicone gasket
Finish:
Our environmentally friendly polyester powder coatings are formulated for high-durability and long-lasting color
Green Technology:
Mercury and UV free. RoHS-compliant components.
Performance
Lifespan:
100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations
Listings
IESNA LM-79 & LM-80 Testing:
RAB LED luminaires and LED components have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.
Other
Equivalency:
Equivalent to 150W Metal Halide
Warranty:
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB's warranty is subject to all terms and conditions found at rablighting.com/warranty.
Buy American Act Compliance:
RAB values USA manufacturing! Upon request,
RAB may be able to manufacture this product to be compliant with the Buy American Act (BAA).
Please contact customer service to request a quote for the product to be made BAA compliant.
Electrical
Driver:
Constant Current, Class 2, 100-277V, 50/60 Hz,
2000mA, THD <20%
THD:
4.5% at 120V, 13% at 277V
Power Factor:
99.5% at 120V, 94.3% at 277V
Dimensions Features
Class 1, Division 2, Groups A, B, C, D
IP66, UL1598, UL8750 and UL 844 ratings
Resistant to shock and vibration
Rugged construction ensures long-life and safe operation
100,000-Hour LED lifespan
5-Year, no-compromise warranty
Need help? Tech help line: (888) 722-1000 Email: [email protected] Website: www.rablighting.com
Copyright © 2020 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice
Page 3 of 4
HAZXLED80F-DG
Ordering Matrix
Family
HAZXLED
Wattage
80
26 = 26W
42 = 42W
80 = 80W
Lens/Globes
F
CF = Clear Flat Lens
FF = Frosted Flat Lens
C = Clear Globe
F = Frosted Globe
FR = Frosted Red Globe
FG = Frosted Green Globe
FB = Frosted Blue Globe
FA = Frosted Amber Globe
–
Guard
DG
Blank = No guard
G = Wire guard
DG = Die cast guard
Driver Options
Blank = On/Off
/D10 = 0-10V Dimming
/480 = 480V On/Off
Need help? Tech help line: (888) 722-1000 Email: [email protected] Website: www.rablighting.com
Copyright © 2020 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice
Page 4 of 4
