2.Loosen T-Shape Backdrop Stand User Manual Features Speciﬁcations 1 High-quality aluminum alloy made, stable structure for strong support. 2 Lightweight, compact, portable, and ﬁne workmanship. 3 Suitable for muslin, canvas and paper backgrounds. 4 Quick to set up and disassemble in minutes. Materials Aluminum alloy construction Max height 2.3 ft Min height 6.5 ft Fold height 2.26 ft Fixed Width 5 ft Spigot 1/4" Diameter of Legs 2 5 3.Take out two crossbars, Φ0.98"-0.87"-0.75"-0.63" Package Contents the 2 height adjustment knobs to adjust the height of the tripod. Remember to retighten the knobs after adjusting the height. (Φ25mm-22mm-19mm-16mm) Assembly Instructions align the two crossbars to the interface and engage them (the bayonet points need to be completely overlapped). 5.Finally, ﬁx green screen, canvas, muslin, cotton, paper or PVC background backdrop paper with the spring clamps. 3 Safety Instructions 1 Height Adjustable Tripod Stand x 1 Crossbar x 2 1.Loosen the bottom Spring Clamp x 4 Contact: [email protected] Carrying Bag x 1 knob and open the tripod. After that, retighten the bottom knob. For better stability, the angle between 2 brackets needs to be greater than 90°. 4 4.Align the connected crossbar with the stand, place the crossbar in the tripod screw, fasten the side knob to secure the crossbar to the stand 1.Keep the parts of this product away from ﬁre and heating source. 2.Keep the parts of this product out of reach of children for safety concerns. 3.To get the best height and stability push down on the base until the legs are widely opened. 4.Always use the sand bag to further secure the stand.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project