Sony WHCH510/B Product information

Sony WHCH510/B Product information
How to pair your Bluetooth device to a laptop
/ desktop
Step 1: Make sure your laptop / desktop has a Bluetooth
The first important step is to make sure the laptop / desktop has a Bluetooth module. Some
laptop / desktop might not come with this hardware. Check the manual of your laptop / desktop
on the availability of the Bluetooth module.
If your laptop / desktop does not come with a Bluetooth module, an external Bluetooth
module adapter can be purchased to help you enable Bluetooth function on your laptop / desktop.
Step 2: Put the device you want to connect into pairing mode
Make the device you want to connect to your laptop or desktop discoverable. You do this
by initiating pairing mode. The way to do this varies, depending on the device you want to use
(headphones, speakers, smartphone, etc.). Check the manual of your product for more
information on pairing mode.
For Bluetooth speakers or headphones, there will be a pairing button available that you
will need to press and hold for several seconds to activate pairing mode on Bluetooth
speakers or headphones.
If it’s the very first time you are using your speakers or headphones, it’s highly likely that
they will automatically go into pairing mode when you turn them on.
However, remember that the second and consecutive times you pair a device, pairing
mode might differ with the first time you’ve paired it with a device when you
unboxed it:
E.g. The MDR-1000X immediately goes into pairing mode when using it for the first
time; the second time you want to pair these headphones you will have to press and hold
the pairing mode button for 7 seconds.
Ensure your device is not already connected to a previous device: Bluetooth devices often
automatically connect with previously paired devices when they are nearby and
Bluetooth is enabled.
Step 3: Enable Bluetooth on your laptop/desktop
Windows 10 & 8
1. Go to [Settings]
2. Click on [Devices]
3. Click the [Bluetooth] tab and ensure Bluetooth is set to [ON]
4. Otherwise, select [More Bluetooth options] / [Advanced Bluetooth
settings] underneath Related Settings
5. This will open the Bluetooth settings window. In the first tab [Options] you will see
a [Discovery] section with the [Allow Bluetooth devices to find this PC] option
6. Check the option, and don’t forget to click the [Apply] button at the bottom
Windows 7
1. Go to [Control Panel]
2. Use the search function to search for [Bluetooth]
3. Click on [Change Bluetooth settings] and ensure the necessary settings are enabled:
1. Allow Bluetooth devices to find this computer
2. Allow Bluetooth devices to connect to this computer
3. Alert me when a new Bluetooth device wants to connect
4. Don't forget to press [Apply]
iOS / Mac
1. On your Mac, choose Apple menu > System Preferences, then click Bluetooth.
Your Mac is now discoverable.
2. Alternatively, go the top menu bar and click on the Bluetooth icon if it is available
Ensure Bluetooth is enabled.
Step 4: Pairing and setting up your device
Windows 10 & 8
1. Click the [Start] button and select [Settings]
2. Select [Devices]
3. Click the [Bluetooth] tab, and then click the [Bluetooth] button to turn on the
BLUETOOTH function.
4. Select your device and click [Pair]
5. Check your sound settings to make sure that sound is played via the correct output.
Windows 7
Click [Start]
Go to [Control Panel]
Select [Devices and Printers] (sometimes located under [Hardware and Sound] )
Under [Devices and Printers], click [Add a device]
Make sure the Bluetooth headset has been set to "Pairing Mode"
In the list, locate the device you want to connect (there might be many other devices
around you, eager to connect).
In the following example, we are connecting the WH-H900 headphones, after
putting them in pairing mode by pressing the ON button for 7 seconds.
7. In the [Add a device] window, select the Bluetooth headset and you will see
a [Connecting to device] notification
8. At this point, your computer might automatically install the required drivers, and this will
prompt a notification near the taskbar area. Depending on your headphone or speaker
model, you might have to enter the pairing code. The default code is 0000.
9. Once the device is added you will see the following screen:
10. When you click on the [Devices and Printers] button, it will take you to an overview of
the devices connected to your laptop/desktop. If you double-click your device, you will
see the following options screen:
11. If your headphones are equipped with a microphone, you will have the option to choose
the operations you want to use your headphones for:
1. Listen to music
2. Forward VoIP Calls to Handsfree
Note that the second option will reduce your sound quality compared to the
first option because it takes preference on signal strength over sound quality.
12. Finally, right-click on the sound icon in the taskbar to select [Playback devices] and
make sure your headphones are selected as the Default Playback Device
iOS / Mac
1. If you have successfully put your speakers or headphones into pairing mode, they should
appear in the Bluetooth list. If you do not immediately see them, make sure to scroll
down to see if they’re not hidden further in the menu.
In the following example, we have paired both the MDR-1000X and the MDR-ZX330BT
2. Select your device in the list and click the [Pair] button
3. You can connect multiple devices (but not necessarily play them at the same time, you
will have to select the output source)
4. Don’t forget to check your sound settings in system preferences to enable the correct
Additional troubleshooting tips
Turn Bluetooth OFF and ON again
Try switching Bluetooth OFF and ON again if you are certain your device is in pairing mode but
is not showing in your device list on your computer.
Remember to turn OFF Airplane mode (Windows 10)
Go to [Start]
Select [Settings]
Go to [Network & Internet]
Change the option [Airplane Mode] to [OFF]
Check your Bluetooth drivers
1. Click [Start] and search for [Device Manager] (This will prompt the window on the
screenshot below to pop up)
2. Look for all Bluetooth listings by opening the [Network Adapters category] and/or
the [Bluetooth Radios category] (if available).
3. Check if the driver has no yellow exclamation mark or down arrow sign
1. Exclamation mark: update or reinstall your computer’s Bluetooth drivers
2. Down arrow: Bluetooth is disabled: right click and enable to activate Bluetooth
How to pair your Bluetooth headphones with
another device
This page introduces instructions for pairing your headphones with your source device, such as a
Walkman, smartphone, computer or Sony Android TV.
Before you start the pairing operation, please confirm the following:
Refer to the operating instructions or help guide for model-specific information.
Place the source device within 1 m (3 feet) of the headphones.
Make sure the headphones and Bluetooth source device are both sufficiently charged.
Bluetooth headphones pairing procedure:
1. Press and hold on the
(power) button for approx. 7 seconds.
NOTE: When you are registering a device for the first time after purchase or you have
reset the headphones to factory settings (there is no registered device information in the
headphones), the headphones will switch automatically to pairing mode when powered
2. The indicator will flash.
3. Confirm that the indicator continues to flash after releasing your finger from the button.
Voice guidance "BLUETOOTH pairing" (performing Bluetooth pairing) will play.
4. Perform the pairing procedure on the source device to detect your Bluetooth headphones.
NOTE: Complete pairing with the source device within 5 minutes because the
headphones pairing mode ends after 5 minutes. If pairing mode ends, you must restart
pairing operations.
Bluetooth source device pairing procedure:
Select your source device from the following list to confirm the relevant pairing procedure.
Android device (smartphone, tablet)
iOS device (iPhone, iPad)
Windows 7
Windows 8
Windows 10
Sony Android TVs
NOTE: Not all Sony Android TVs can be use with Bluetooth headphones or speakers,
please verify that your TV model is in the list.
Helpful information on Bluetooth pairing
Once Bluetooth devices are paired, there is no need to pair them again, except in the
following cases:
When you perform a factory settings reset, all pairing information is deleted.
Pairing information has been deleted after repair, etc.
If you exceed the maximum number of Bluetooth devices that can be paired (approx. 8),
the oldest pairing information will be overwritten and replaced by any new pairing
When the pairing information for the headset has been deleted from the Bluetooth source
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF