AAEON RTC-1200 Rugged Tablet Computers and Accessory Manual

Add to my manuals
62 Pages

advertisement

AAEON RTC-1200 Rugged Tablet Computers and Accessory Manual | Manualzz

RTC-1200

Rugged Tablet Computer

User’s Manual 3

rd

Ed

Last Updated: May 27, 2020

Copyright Notice

This document is copyrighted, 2020. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, or for any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein.

AAEON reserves the right to make changes in the product design without notice to its users.

Preface II

Acknowledgement

All other product s’ name or trademarks are properties of their respective owners.

Intel®, Celeron® are registered trademarks of Intel Corporation

Core™ i7/i5/i3 is a registered trademark of Intel Corporation

Windows™, Windows™ 10, Windows™ 7 and the Windows logo are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners. The publisher of this document does not imply nor intent to imply ownership of trademarked properties used in this document but omitted from the list above.

Preface III

Packing List

Before setting up your product, please make sure the following items have been shipped:

Item

RTC-1200

Power Adapter

Quantity

1

1

If any of these items are missing or damaged, please contact your distributor or sales representative immediately.

Preface IV

About this Document

This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product.

Users may refer to the product page at AAEON.com for the latest version of this document.

Note: This document is intended for use with the RTC-1200. For RTC-1200SK user manual, please contact your AAEON sales representative to obtain a copy.

Preface V

Safety Precautions

Please read the following safety instructions carefully. It is advised that you keep this manual for future references

1.

All cautions and warnings on the device should be noted.

2.

Make sure the power source matches the power rating of the device.

3.

Position the power cord so that people cannot step on it. Do not place anything over the power cord.

4.

Always completely disconnect the power before working on the system ’ s hardware.

5.

No connections should be made when the system is powered as a sudden rush of power may damage sensitive electronic components.

6.

If the device is not to be used for a long time, disconnect it from the power supply to avoid damage by transient over-voltage.

7.

Always disconnect this device from any AC supply before cleaning.

8.

While cleaning, use a damp cloth instead of liquid or spray detergents.

9.

Make sure the device is installed near a power outlet and is easily accessible.

10.

Keep this device away from humidity.

11.

Place the device on a solid surface during installation to prevent falls

12.

Do not cover the openings on the device to ensure optimal heat dissipation.

13.

Watch out for high temperatures when the system is running.

14.

Do not touch the heat sink or heat spreader when the system is running

15.

Never pour any liquid into the openings. This could cause fire or electric shock.

16.

As most electronic components are sensitive to static electrical charge, be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and contain all electronic components in any static-shielded containers.

Preface VI

17.

If any of the following situations arises, please the contact our service personnel: i.

Damaged power cord or plug ii.

iii.

iv.

Liquid intrusion to the device

Exposure to moisture

Device is not working as expected or in a manner as described in this manual v.

vi.

The device is dropped or damaged

Any obvious signs of damage displayed on the device

18.

DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH

TEMPERATURES BEYOND THE DEVICE ’ S PERMITTED STORAGE TEMPERATURES

(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VII

FCC Statement

This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions and your local government’s recycling or disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.

Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et les directives gouvernementales de recyclage.

Preface VIII

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量

AAEON System QO4-381 Rev.A0

部件名称 铅

(Pb)

(Hg)

有毒有害物质或元素

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯

(PBDE)

印刷电路板

及其电子组件

外部信号

连接器及线材

外壳

中央处理器

与内存

硬盘

液晶模块

光驱

×

×

×

×

×

×

×

触控模块

× ○ ○ ○ ○ ○

电源

× ○ ○

电池

× ○ ○

本表格依据

SJ/T 11364

的规定编制。

:表示该有毒有害物质在该部件所有均质材料中的含量均在

GB/T 26572

标准规定的限量要求以下。

×

:表示该有害物质的某一均质材料超出了

GB/T 26572

的限量要求,然而该

部件

仍符合欧盟指令

2011/65/EU

的规范。

备注:

一、此产品所标示之环保使用期限,系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、光驱、电源为选购品。

三、上述部件物质液晶模块、触控模块仅一体机产品适用。

Preface IX

China RoHS Requirement (EN)

Hazardous and Toxic Materials List

AAEON System QO4-381 Rev.A0

Hazardous or Toxic Materials or Elements

Component

Name

PCB and

Components

Wires &

Connectors for

Ext.Connections

Chassis

CPU & RAM

HDD Drive

LCD Module

Optical Drive

X

X

O

X

X

X

X

O

O

O

O

O

X

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

Touch Control

Module

PSU

X O O O O O

X O O O O O

Battery X O O O O O

This form is prepared in compliance with the provisions of SJ/T 11364.

O: The level of toxic or hazardous materials present in this component and its parts is below the limit specified by GB/T 26572.

X: The level of toxic of hazardous materials present in the component exceed the limits specified by GB/T 26572, but is still in compliance with EU Directive 2011/65/EU (RoHS 2).

Notes:

1. The Environment Friendly Use Period indicated by labelling on this product is applicable only to use under normal conditions.

2. Individual components including the CPU, RAM/memory, HDD, optical drive, and PSU are optional.

3. LCD Module and Touch Control Module only applies to certain products which feature these components.

Preface X

Table of Contents

Chapter 1 - Product Specifications ........................................................................................ 1

1.1

Specifications ............................................................................................................ 2

Chapter 2 – Getting Started ................................................................................................... 6

2.1

Product Overview ................................................................................................... 7

2.2

Notes before use ................................................................................................... 12

2.3

Turning on the Device .......................................................................................... 13

2.4

Touch Controls ....................................................................................................... 14

2.5

COM Port Pin Definition (RS232/422/485) ...................................................... 14

Chapter 3 – System Settings ................................................................................................ 15

3.1

Settings Screen ...................................................................................................... 16

3.1.1

System.......................................................................................................... 19

3.1.2

Device ......................................................................................................... 22

3.1.3

Network & Internet .................................................................................. 23

3.1.4

Personalization Settings .......................................................................... 24

3.1.5

Accounts ..................................................................................................... 25

3.1.6

Time & Language Settings ..................................................................... 26

3.1.7

Ease of Access Settings ........................................................................... 27

3.1.8

Privacy Settings ......................................................................................... 28

3.1.9

Update & Security .................................................................................... 29

Chapter 4 – Optional Accessories ....................................................................................... 30

4.1

Barcode Scanner ................................................................................................... 31

4.2

Docking Station .................................................................................................... 32

4.2.1

Specifications ............................................................................................. 33

4.3

Install Camera Metro UI ...................................................................................... 35

Appendix A - Statements ..................................................................................................... 39

A.1

Statements ............................................................................................................. 40

Preface XI

A.2

Canadian Notice ................................................................................................... 42

A.3

Safety Caution ....................................................................................................... 43

A.4

Battery Disposal .................................................................................................... 45

A.5

Battery Caution ..................................................................................................... 47

A.6

Adapter Caution ................................................................................................... 48

A.7

FCC Interference Statement ............................................................................... 49

Preface XII

Chapter 1

Chapter 1 -

Product Specifications

1.1 Specifications

System

Processor

Operating System

Memory

Storage

Display

I/O Port

Wireless Communication

Chapter 1 – Product Specifications

7 th

Gen Intel Processors (formerly Kaby Lake)

Core i5-7300U Dual Core up to 3.9 GHz

Core i3-7100U Dual Core up to 3.9 GHz

Celeron 3965U Dual Core 2.2 GHz

Windows® 10 IoT Enterprise 64bit (Default)

Windows® 7 (Optional, systems with Skylake processors)

DDR3L SODIMM Socket x 1, up to 8GB

DDR4 SODIMM Socket (Optional)

M.2 (NGFF) SSD, 64GB (Default)

11.6” FHD (1920x1080) 300-nit / 1000-nit

TFT-LCD With Projected Capacitive

Multi-Touch Screen

HDMI port x 1

SIM card slot x 1

Micro-SD card slot x 1

Audio jack x 1 (3.5mm)

USB 3.2 Gen 1 x 1 (Type A)

USB 3.2 Gen 1 x 1 (Type C) (Optional)

USB 2.0 x 2 (Type A)

DC-in Jack x 1

RS-232/422/485 COM Port x 1

10/100/1000 Base-T RJ45 Ethernet x 1

Wi-Fi 802.11 b/g/n, Bluetooth v4.1

2

System

Navigation

WWAN (optional)

Camera

Sensor

Expansion Slot

Barcode Scanner (Optional)

HF RFID (Optional)

Physical Key

GPS, GLONASS

LTE via mini-card slot (Optional)

2 MP front camera

5 MP auto-focus rear camera with flash

G-sensor, E-compass, Gyro-sensor,

Light-sensor

Docking connector x 1

GNSS antenna Pass-through connector x 1,

WWAN antenna Pass-through connector x 1

2D Barcode scanner, OPTICON MDI-4100-USB

(Optional)

ISO 15693 (R/W)

ISO 18092 (R/W)

ISO 14443-A (R/W)

ISO 14443-B (Read Only UID)

Depending on card type

F0 or Windows (Windows Start Key)

F1 (Ctrl+Alt+Del & Barcode Scanner Trigger)

F2 (Touch Mode Switch)

F3 (PrtSc/Print Screen)

Volume Up, Volume Down

Chapter 1 – Product Specifications 3

Mechanical

Color

Dimension (W x H x D)

Gross Weight

Environmental

Operating Temperature

Storage Temperature

Humidity

Environmental Sealing

Vibration

Drop

ESD

Certifications and Standards

Gray & Black

12.36” x 7.87” x 0.96” (310.4mm x 200mm x

24.5mm)

3.3 lbs. (1.5 kg)

-4°F ~ 140°F (-20°C ~ 60°C)

-67°F ~ 158°F (-55°C ~ 70°C)

50°C; 5% ~ 90% R/H; 120 hours, non-condensing

IP65

MIL-STD-810G Method 514.6 Procedure I, Cat.

24, Fig. 514.6E-1 & E-2

MIL-STD-810G Method 516.6 Procedure IV

Height of Drop: 122cm (48 inch; 4ft),

Number of Drop: 26 times

Floor: 2 inch plywood backed by concrete

For all surfaces, edges and corners

Air charge: +/- 8KV, Contact charge: +/- 4KV

UL: UL60950-1, CE/LVD: EN60950-1, FCC, CE

Chapter 1 – Product Specifications 4

Power Supply

AC / DC Adapter

Battery Life

Master Battery

Slave Battery

Display

LCD

Resolution

Maximum Color

Dot Size

Brightness

Viewing Angle

Touchscreen

Touch Type

Light Transmission

AC 100~240V, 50~60 Hz; DC 19V/3.42A (65W)

Dual Li-ion High Capacity Batteries, up to 10

Hours Battery Life

Hot-swappable battery: 14.4V, 2270mAh, 32.7W

Hot-swappable battery: 14.4V, 2270mAh, 32.7W

11.6” TFT -LCD/ 16:9, with LED backlight

1920 x 1080 pixel

16.7M

0.117 x 0.117(H)

1000 nits; 300 nits (Optional)

Horizontal: 178° (Typ.), Vertical: 178° (Typ.)

11.6” Projected Capacitive Multi -Touch Screen

Gloves / Finger Switchable by F2

Min 87% (ASTM D1003; Wavelength = 550 nm)

Chapter 1 – Product Specifications 5

Chapter 2

Chapter 2 –

Getting Started

2.1 Product Overview

Front View

Chapter 2 – Getting Started 7

Side View (Left)

Power Button &

LED Indicator

NFC Reader

3.5 mm Audio Jack

Micro-SD Card Slot

SIM Card Slot

Light Sensor, 2MP camera &

Microphone

COM Port

DC-in Port

Cradle Port &

GNSS/WLAN Pass-through Port

Label

NFC Reader

Function

ISO 15693 (R/W)

ISO 18092 (R/W)

ISO 14443-A (R/W)

ISO 14443-B (Read Only UID)

Depending on card type

Power Button Shut down/power on & sleep mode by Power Options in

System Settings

LED Indicator

3.5 mm Audio Jack

Battery Charge Status; Orange or Green (full)

Usable with any audio device with a 3.5 mm jack.

Chapter 2 – Getting Started 8

Label micro-SD card Slot

SIM Card Slot

Light Sensor

Function support up to SDXC 2TB

Usable with standard-size SIM cards only.

Ambient Light Sensor

2MP camera

Microphone

COM Port

DC-in Port

1080p FHD Webcam

DMiC for speech/voice program

RS232/422/485

AC Power input

:

100V-240V, 50Hz-60Hz, 65W output: 19V

Cradle & GNSS/WLAN

Pass-through Port

For interaction with docking station I/O

Chapter 2 – Getting Started 9

Side view (Right)

Windows Key

Volume Up

Volume Down

Ctrl-Alt-Del

Touch Mode Switch

Print Screen

HDMI

USB 3.0

USB 2.0

USB 2.0

RJ45

F2

F3

HDMI

USB3.0

USB2.0

USB2.0

RJ45

Label

Windows Key

Volume Up

Volume Down

F1

Chapter 2 – Getting Started

Function

Start Menu Key

Speaker volume up

Speaker volume down

Ctr+Atl+Del as Soft Reboot & BCR Trigger Button (When

BCR is enable)

Touch Modes Switch; Finger (Rain) or Gloves

Print Screen

HDMI 1.4

Type A slot

Type A slot

Type A slot

GbE LAN

10

Rear View

5MP Camera

Flash

Battery Bay

Part

5MP Camera & Flash

Battery Bay

Function

QSXVGA Camera with Flash

Battery bay for 2 batteries

Chapter 2 – Getting Started 11

2.2 Notes before use

Before using your device, please read through the following instructions

Use only the power adapter that came with your device. Using a different power

⚫ adapter may cause damage.

The AC adapter is designed for use with the RTC-1200 only.

This product is intended to be supplied with a Listed Power Adapter or DC power source, rated 19Vdc, 3.42A minimum, Tma = 40°C. Please contact AAEON for further assistance.

Using a power outlet is the best way to charge your device (refer to section 1.2

⚫ fo r the adapter’s volta ge output and acceptable input)

When using the device for the first time, fully charge the battery for up to 8 hours. If the device is inactive, charging the battery once per month is recommended to prevent deterioration.

There are two batteries in the RTC-1200: both batteries can be monitored at the

⚫ title bar). Charge the device once Battery 1 drops below 20%

Always allow your battery to be fully charged before use. Calibrating the battery before use is highly recommended.

To prolong battery life, allow a fully charged battery to discharge more than

95% before recharging.

Ensure that the battery cover is properly secured by manually pushing the pin to lock position.

The RTC-1200 CANNOT be charged via an USB connection.

The IP65 waterproof protection may get damaged when subjected to shocks greater than levels tested in MIL-STD-810G Method 516.6 Procedure IV. The protection may also be affected if the rubber connector fails to cover or close firmly.

Chapter 2 – Getting Started 12

2.3 Turning on the Device

The power button turns your device on and off. Hold the button for one second to power on.

To start or wake up from sleep mode, hold the power button for 0.5 seconds until the shutdown confirmation is shown. If the system remains unresponsive, press and hold the power button to force power off. Caution: shutting down the system in this manner may result in data loss. It is strongly recommended that important data is backed up on a regular basis.

Chapter 2 – Getting Started 13

2.4 Touch Controls

Gesture

Single Tap

Action

Single taps allow users to open any files or applications or select text input area

Long Tap

(Tap and Hold)

Long tapping an icon allows it to be moved freely on the screen. This gesture also opens the context menu, letting you cut, copy, rename, delete the selected file, or select multiple files for batch actions

2.5 COM Port Pin Definition (RS232/422/485)

6

7

8

9

Pin No

1

2

3

4

5

Chapter 2 – Getting Started

RS232

Serial Port Pin Definition

RS485

DCD DATA-

RX

TX

DTR

GND

DATA+

DSR

RTS

CTS

RI

RS422 & 485 1T/1R

TX-

TX+

RX+

RX-

14

Chapter 3

Chapter 3 –

System Settings

3.1 Settings Screen

The Settings screen allows you to configure some settings of your RTC-1200 which includes:

Main Category Sub Category

Display

System

Device

Networks & Internet

Personalization

Accounts

Time & Language

Family

Speech

Region

Date

Notifications

Apps

Power

Bluetooth

Printers

Mouse

Wi-Fi

Airplane Mode

VPN

Background

Lock Screen

Colors

Your Account

Sync Settings

Work

Chapter 3 – System Settings 16

Main Category

Ease of Access

Privacy

Update & Security

Sub Category

Narrator

Magnifier

High Contrast

Location

Camera

Windows Update

Recovery

Backup

Chapter 3 – System Settings 17

To enter the Settings Menu

From the Home Screen

1. Open the Charm Bar.

2. Tap Settings

Chapter 3 – System Settings 18

3.1.1 System

Configuring the Display.

1. Go to Settings> System> Display.

∙ Font Size:

Adjust the font size here.

∙ Display Rotation:

Rotation of display is locked when set to On.

∙ Brightness:

Allow the device to adjust the screen brightness automatically.

Chapter 3 – System Settings 19

Configuring Notifications

1. Go to Settings >System

2. Select Notifications & actions

∙ Show app notifications:

Turn app notifications On or Off.

∙ Lock Screen:

Turn notifications on the lock screen On or Off.

∙ Alarms, Reminders, Incoming VOIP calls:

Turn On or Off displaying notifications on the lock screen for alarms, reminders and incoming VOIP calls

Chapter 3 – System Settings 20

Configuring Apps & Features

1. Go to Settings> System> Apps & features

2. You can view the amount of the space used by applications installed on your system.

Configuring Power Settings

1. Go to Settings> System

2. Select Power & Sleep.

3. Set up how long the system waits when idle before turning off the screen and entering sleep mode.

Chapter 3 – System Settings 21

3.1.2 Device

Adding Printers & Scanners

1. Go to Settings>Devices.

2. Select Printers & Scanners.

3. You may add a printer or scanner.

Pairing Bluetooth devices

1. Go to Settings>Devices.

2. Select Bluetooth to turn on the Bluetooth.

3. Search and select the device you would like to pair with.

Chapter 3 – System Settings 22

3.1.3 Network & Internet

Connecting to a Wi-Fi Network

1. Go to Settings> Network & Internet> Wi-Fi

2. Select the access point you wish to connect to from the list.

3. Enter the network password and tap Connect

Activating Airplane Mode

1. Go to Settings> Network> Airplane mode.

2. Turn on airplane mode to stop all wireless communication, or select which wireless devices to disable.

Chapter 3 – System Settings 23

Configuring VPN

1. Go to Settings> Network> VPN

2. Enter the VPN information into the fields and tap Save.

3.1.4 Personalization Settings

Background, Colors, and Lock Screen

1. Go to Settings> Personalization

2. Set Background image, system colors, lock screen or system theme

Chapter 3 – System Settings 24

3.1.5 Accounts

Configuring User Accounts

1. Go to Settings> Accounts.

2. Configure User Account settings. Note: You must be logged into the Administrator account or have

Administrator privileges to configure other users on the system.

Chapter 3 – System Settings 25

3.1.6 Time & Language Settings

Configuring Date & Time

1. Go to Settings> Time & Language

2. Set the device's date and time, time zone, and display format here.

Chapter 3 – System Settings 26

3.1.7 Ease of Access Settings

Configuring Accessibility

1. Go to Settings> Ease of Access

2. Configure settings for system accessibility, including narrator, magnifier, high contrast, closed captions, keyboard, mouse and other options.

Chapter 3 – System Settings 27

3.1.8 Privacy Settings

Changing Privacy Options

1. Go to Settings> Privacy

2. Configure privacy settings here.

Chapter 3 – System Settings 28

3.1.9 Update & Security

Windows Updates

1. Go to Settings> Update & Security.

2. Check for updates and configure Windows Update,

Windows Defender, system backup, recovery and

Windows Activation here.

Chapter 3 – System Settings 29

Chapter 4

Chapter 4 –

Optional Accessories

4.1 Barcode Scanner

The barcode scanner enables the RTC-1200 to read and scan barcodes for a wide variety of purposes. Note: Barcode scanner does not ship with any software or SDKs.

Perform the following test to check if the scanner is working properly:

1.

Open Notepad

2.

Scan a barcode

3.

If the scanner is working, the code will be scanned and entered into the Notepad document.

For detailed specifications and operating instructions, please refer to the barcode scanner manual in the driver disk provided.

You can scan the barcode below to change the USB interface type.

Chapter 4 – Optional Accessories 31

4.2 Docking Station

The docking station provides users with a stable and convenient platform when using the RTC-1200 at a workstation or desktop. The docking station provides additional I/O ports, and allows users to connect a keyboard and mouse.

USB 2.0 x 2

External antenna for

GPS and WWAN

Chapter 4 – Optional Accessories 32

M12 5P Female

RS232

USB 3.2 Gen 1 x 2 (Dual Port)

RJ45

4.2.1 Specifications

Connectors & LED indicators

I/O

DC Input

LED Indicator

Chapter 4 – Optional Accessories

USB 2.0 x 2

USB 3.2 Gen 1 x 2 (Dual Port)

RJ45 jack for 10/100/1000 Base-TX

Ethernet x 1

RS-232 x 2

External antenna for GPS and WWN x 2

M12 5P Female (DC 9V to 36V)

Orange: DC in w/o Tablet

Blue: DC in w/ Tablet

33

Mechanical

Color

Construction

Dimensions (W x H x D)

Gross Weight

Environmental

Operating Temperature

Storage Temperature

ESD

EMI/ Safety

Power Supply

AC/DC Adapter

Black

PC

261 x 165 x 75 mm (10.28 x 6.5 x 2.96” )

2.92 kg (6.44 lbs.)

0°C ~ 40°C (32 ~ 104°F)

-10°C ~ 50°C (14 ~122°F)

Air +/- 8KV, Contact +/- 4KV

CE/ FCC Class B/ UL

AC Power Input: 100 ~ 240 V, 47 ~ 63 Hz, 90 W output: 19 V, 4.74 A

Chapter 4 – Optional Accessories 34

4.3 Install Camera Metro UI

1.

Open Windows Settings menu and go to Time & language:

2. Change date and time to May 1, 2015 as shown below:

Chapter 4 – Optional Accessories 35

3.

Go back to Windows Settings and go to Update & security:

4. Open “For developers” submenu and enable Developer mode. Click “Yes” to confirm.

Chapter 4 – Optional Accessories 36

5.

Right-click Add-AppDevPackage file and select “ Run with PowerShell ”

6.

Press A, then press Enter to execute.

Chapter 4 – Optional Accessories 37

7.

After installation is complete, restart the system. You should see the Camera

Manual Controls app in the Start Menu.

Chapter 4 – Optional Accessories 38

Appendix A

Appendix A -

Statements

A.1 Statements

Declarations and Safety Statements

Federal Communications Commission Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Appendix A – Statements 40

The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

RF Exposure Information (SAR)

This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.

Government.

The exposure standard employs a unit of measurement known as the Specific

Absorption Rate (SAR). The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels.

The highest SAR value for the device as reported to the FCC is 1.01 W/kg when placed next to the body.

The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov./oet/ea/fccid on the FCC ID: OHBRTC1200WBGH

Federal Communication Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.

Appendix A – Statements 41

A.2 Canadian Notice

IC Regulations

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This Category II radio communication device complies with Industry Canada Standard

RSS-310.

Ce dispositive de radio communication de catégorie II respecte la norme CNR-310 d’Industrie Canada.

IC Radiation Exposure Statement

This EUT is compliant with SAR for general population/uncontrolled exposure limits in

IC RSS-102 and has been tested in accordance with the measurement methods and procedures specified in IEEE 1528. This equipment should be installed and operated with minimum distance 0 cm between the radiator and your body.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

The County Code Selection feature is disabled for product marketed in the U.S. and

Canada.

For products available in the U.S./Canada markets, only channels 1-11 can be operated.

The selection of other channels is not possible.

Appendix A – Statements 42

A.3 Safety Caution

Important Safety Instructions

Power Safety Requirement

Products with electrical current ratings up to 3A and weighs more than 1 Kg must use approved power cords greater than or equal to: VCTF, 3G or 0.75mm

2

.

Basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

Do not use this product near water, for example, near a bathtub, wash bowl,

⚫ kitchen sink or laundry tub, in a wet basement or near a swimming pool.

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

Do not use the telephone to report a gas leak in the vicinity of the leak.

Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

I

nstructions importantes de sécurité.

Exigences de sécurité concernant l’alimentation.

Les produits dont le co urant électrique monte jusqu’à 3 A et pesant plus de 1Kgs doivent utiliser un cordon d’alimentation approuvé égal ou supérieur à VCTF, 3G o u 0.75mm

2

Des mesures de précaution de base doivent toujours être suivies afin de réduire les risques d’incendie, de choc électrique et de blessures aux personnes, incluant :

Ne pas utiliser ce produit près de l’eau, par exemple dans une baignoire, une cuvette, un évier, une machine à laver, un sous-sol humide ou une piscine.

Eviter d’utiliser un téléphone (autre que sans fil) pendant un orage électrique ? il y a un risque de choc électrique à distance lié à la foudre.

Ne pas utiliser le téléphone pour a lerter lors d’une fuite de gaz si vous êtes dans le

Appendix A – Statements 43

voisinage de la fuite

Utiliser seulement le cordon d’alimentation et la batterie indiqués dans le manuel.

Ne pas jeter les batteries dans le feu. Elles pourraient exploser. Vérifier les dispositions locales de recyclage.

Appendix A – Statements 44

A.4 Battery Disposal

There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

Il y a un risque d’explosion si la batterie est remplacée par un autre type incorrect.

Disposer de la batterie en accord avec les instructions.

This symbol indicates that the battery should NOT be placed in municipal waste.

DO NOT throw the tablet with municipal waste. This product is designed for proper reuse of parts and recycling. This symbol indicates that the products (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

SAFE TEMP : The RTC-1200 should only be used in environments between -20°C (-4°F) and 50°C (122°F).

Regulatory Information and Disclaimers

Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not express ly approved by the manufacturer may void the user’s authority to operate the equipment.

Appendix A – Statements 45

The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines.

Appendix A – Statements 46

A.5 Battery Caution

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

Il y a un risque d’explosion si la batterie est remplacée par un autre type incorrect.

Disposer de la batterie en accord avec les instructions.

Regulatory information / Disclaimers

Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines.

Appendix A – Statements 47

A.6 Adapter Caution

This RTC is for use with model NO. FSP065-REBN2 (AAEON Part number: 1255300658)

Ce modèle RTC est à utilizer avec le modèle n° FSP065-REBN2. (AAEON Référence:

1255300658)

Appendix A – Statements 48

A.7 FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Appendix A – Statements 49

IMPORTANT NOTE:

Federal Communication Commission (FCC) Radiation Exposure Statement

This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C.

Appendix A – Statements 50

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project