ALDI ABP1815MA, CDT218XA.9, CKT718A, CLP18WA.9, CPS18WA.9, CSC165XA.9, JLH122200370S, TRD18SA.9, Workzone Titanium Xfinity Series, Z10 Instruction Manual

Xfinity Li-ION 20V

7PC CORDLESS KIT

Instruction Manual

1300 889 028

CKT718A

[email protected]

2323 05/2019

CKT718A

Version number: 004

2

The contents of all Instruction Manual

20V Battery And Battery Charger

20V Drill/Driver

20V Impact Driver

20V Circular Saw

20V Detail Sander

20V LED Torch

20V Bluetooth Speaker

20V USB Charger

05

06

07

08

01

02

03

04

Xfinity Li-ION 20V

Battery And Battery Charger

Instruction Manual

IMPORTANT

Read carefully before use

Keep for future reference

01

MODEL NUMBER

JLH122200370S&

Z10&ABP1815MA


2

Welcome

Congratulations in choosing to buy a Workzone® Titanium Xfinity Plus

20V Li-ion Battery and Battery Charger

All products bought to you by Workzone® Titanium are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty. We hope you will enjoy your purchase for many years to come.

When you open your packaging, first remove all items and check there are no parts damaged or missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

AFTER SALES SUPPORT

1300 889 028 (toll free)

2 e-mail: [email protected]

MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

20V Battery And Battery Charger

Warranty Details

REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

The product is guaranteed to be free from defects in workmanship and par ts for a period of 60 months f rom the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. T conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

3


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

4

Contents

Application

Package Content List

Parts description

Description of symbols

General safety warnings 8

Operation 11

Maintenance 13

Warranty 13

Environmental protection

Accessories and After Sales Parts

6

7

5

5

15

15

FAQ/Troubleshooting 15

Technical Specifications 16


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

Xfinity Plus 20V Li-ion Battery and Battery Charger–

JLH122200370S&Z10&ABP1815MA

1. Application

First time users or inexperienced operators pay particular attention to the operation of the Xfinity Plus 20V Li-ion Battery and Battery Charger , including details of starting and stopping and correct use of the Xfinity Plus 20V Li-ion

Battery and Battery Charger on pages 11-13, as well as the maintenance instructions on pages 13.

NOTE:

This product is for private domestic DIY use only. It is not suitable for commercial or trade use.

This Xfinity Plus 20V Li-ion Battery and Battery Charger

is used for charging and supplying power to the products enclosed in this 20V Cordless Kit.

The batteries and charger are to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse.

2. Package Content List

2 x 20V Li-Ion Batteries

1 x Battery Charger Adaptor

1 x Plug Pack Charger

1 x Instruction Manual

1 x Warranty Card & Certificate

• Remove all packing materials

• Ensure all parts on the contents list are present

• Check the appliance, and all accessories for transportation damages

WARNING!

Please read and understand this instruction manual before use and keep it for your future reference. Your power tool should only be passed on together with this instruction manual.

WARNING!

To reduce risk of injury, only use the supplied battery and charger or any ALDI Xfinity Plus 20V Li-ion Battery or Battery Charger.

Other type of battery packs may burst causing personal injury and damage. The battery pack must be recharged only with the supplied battery charger adaptor and plug pack charger or any ALDI Xfinity

Plus 20V Battery or Battery Charger.


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

5

6

3. Parts description

1. Battery Charger Adaptor

2. Plug Park Charger

3. Charging indicator light

4. Battery pack

5. Battery pack release button

2

3

1

5

4


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

4. Description of symbols

The instruction manual, rating plate, or on the product itself, may show these symbols. These represent important information about the product or instructions on its use.

To reduce the risk of injury, user must read instruction manual

Warning

12

For indoor use only

Conforms to relevant standards for electrical safety and electromagnetic compatibility

12 Month Warranty Period

Do not crush, disassemble, short terminals or dispose in fire; there is a risk of burns explosion or fire.

Do not put in water.

Do not charge the battery pack if the ambient temperature is less then 0

°

C or greater than 40

°

C.

Double Insulation. There are two independent barriers of insulation to protect you from the possibility of electrical shock.

Polarity.

Li-Ion

Waste electrical products should not be disposed of with household waste.


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

7

8

5. General safety warning

General Safety Warnings

WARNING Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Additional safety instructions for your Battery Charger

1. Before charging, read the instructions.

2. For charge Li-ion battery pack only.

3. Do not charge a leaking battery.

4. Do not use chargers for works other than those for which they are designed.

5. Before charging, ensure your charger is matching the local AC supply.

6. The charging device must be protected from moisture.

7. Do not use the charging device in the open.

8. Do not short out the contacts of battery or charger.

9. Respect the polarity “+/-“ when charging.

10. Do not open the unit and keep out of the reach of children.

11. Do not charge the batteries of other manufactures or ill-suited models.


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

12. Ensure that the connection between the battery charger and battery is correctly positioned and is not obstructed by foreign bodies.

13. Ensure battery charger slots are free of foreign objects and protected against dirt and humidity. Store in a dry and frost-free place.

14. When charging batteries, ensure that the battery charger is in a well-ventilated area and away from inflammable materials.

Batteries can get hot during charging. Do not overcharge any batteries. Ensure that batteries and chargers are not left unsupervised during charging.

15. Do not recharge non-rechargeable batteries, as they can overheat and break.

16. Longer life and better performance can be obtained if the battery pack is charged when the air temperature is between 18 ° C and 24 ° C. Do not charge the battery pack in air temperatures below 0

°

C, or above 40

°

C. This is important as it can prevent serious damage to the battery pack.

17. Charge only battery pack/s of the same model provided by the manufacturer and of models recommended by manufacturer.

Safety Warnings for battery pack a) Do not dismantle, open or shred cells of the battery pack.

b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials.

When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

c) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight.


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

9

10

d) Do not subject battery pack to mechanical shock.

e) In the event of the battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.

f) Seek medical advice immediately if a cell or battery pack has been swallowed.

g) Keep battery pack/s clean and dry.

h) Wipe the battery pack terminals with a clean dry cloth if they become dirty.

i) Battery pack/s need to be charged before use. Always refer to the instructions and use the correct charging procedure.

j) Do not maintain battery pack on charge when not in use.

k) After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.

l) Battery pack gives its best performance when it is operated at normal room temperature (20 °C ± 5 °C).

m) When disposing of battery packs, keep battery packs of different electrochemical systems separate from each other.

n) Recharge only with the charger supplied or any ALDI

Xfinity Plus 20V Chargers. Do not use any charger other than that specifically provided for use with the equipment.

A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

o) Do not use any battery packs which are not designed for use with the equipment.

p) Keep battery packs out of the reach of children.

q) Retain the original product literature for future reference.

r) Remove the battery from the equipment when not in use.


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

s) Dispose of properly.

t) Do not mix cells of different manufacture, capacity, size or type within a device.

u) Do not remove battery pack from its original packaging until required for use.

v) Observe the plus (+) and minus (–) polarity markings on the battery and ensure correct use.

6. Important information – Product care

This Battery uses Lithium Ion Battery Cells. Care must be taken to ensure both the safety and life of the pack is maintained. Ensure you have read all of the safety notes in the previous pages before using the Battery, Charger Adaptor or Plug Pack Charger.

Treat the Battery, Charger Adaptor & Plug Pack Charger with care and within the guidelines of this manual.

If the Battery, Charger Adaptor & Plug Pack Charger becomes immersed in water or any fluids, or is subject to a severe drop or it does not operate within the guidelines of this manual immediately

STOP using it and have it checked.

7. Operation

7.1 Charging the battery

WARNING:

The charger and battery are specially designed to work together so do not attempt to use any other devices. The only other battery or chargers that these components are compatible with is any ALDI Xfinity Plus 20V Li-ion Battery or Battery

Charger. Never insert or allow metallic objects into your charger or battery connections because an electrical failure and hazard will occur.

NOTE:

a) Do not use any charger other than that specifically provided for use with the equipment, or any ALDI Xfinity Plus 20V Li-ion


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

11

12

Battery and Battery Charger.

b) If the battery is very hot, remove the battery from the charger adaptor and allow time for the battery to cool down before recharging.

c) The battery in your new tool is not charged when it leaves the manufacturer. Therefore it must be fully charged before using for the first time.

d) Charge the battery to reach full or no less than half charge before storage. If the tool will not be used for long periods of time, charge the battery every 3-6 months.

7.2 How to charge your battery pack (see fig a)

Charging procedure

1. Connect the battery charger adaptor (1) into the plug pack charger (2).

2. Connect the plug pack charger (2) in to the 240V mains power outlet and turn on. A “green” light indicates power.

3. Slide the battery charger adaptor (1) onto the battery (4) by aligning the guiding rails. A click indicates the battery is fitted.

4. The plug pack charger (2) light will change to “red”. The battery is now in the charging process. When the light returns to

“green”, the battery (4) is fully charged.

NOTE:

The power to the charger should be turned off when unattended, with or without a battery inserted.

Ambient temperature ranges

The ambient temperature range for tool, battery use and storage is 0 o C-45 o C.

The recommended ambient temperature range for the charging system during charging is 0 o

C-40 o

C.


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

13

WARNING:

When battery charge runs out after continuous use or exposure to direct sunlight or heat, allow time for the battery to cool down before re-charging to achieve the full charge.

CHARGING INDICATOR

Light

Red on

Green on

Status

Charging

Fully Charged

8. Maintenance

WARNING Remove the plug from the socket before carrying out any adjustment, servicing or maintenance.

Your battery / charger adaptor & Plug Pack Charger require no additional lubrication or maintenance. Never use water or chemical cleaners to clean them. Wipe clean with a dry cloth. Always store in a dry place.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

9. Warranty

Your new WORKZONE

®

TITANIUM Xfinity Plus 20V Li-ion Battery and

Battery Charger will more than satisfy your expectations.

It has been manufactured under stringent WORKZONE

®

Quality Standards to meet superior performance criteria.

TITANIUM

You will find your new Xfinity Plus 20V Li-ion Battery and Battery

Charger easy and safe to operate, and, with proper care, it will give you many years of dependable service.

CAUTION.

Carefully read through this entire instruction manual


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

14 before using your new WORKZONE ® TITANIUM Xfinity Plus 20V

Li-ion Battery and Battery Charger. Take special care to heed the

Cautions and Warnings.

Your WORKZONE

®

TITANIUM Xfinity Plus 20V Li-ion Battery and

Battery Charger has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this Xfinity Plus 20V Li-ion Battery and Battery Charger , making it easy to maintain and operate.

Use only WORKZONE void your warranty.

® TITANIUM replacement parts for your product. Non-conforming parts or modifications made to parts will

What your 1 year warranty means

Great care has gone into the manufacture of this product and it should therefore provide you with years of good service when used properly.

In the event of product failure within its intended use over the course of as quickly as possible once it has been brought to our attention. In the unlikely event of such an occurrence, or if you require any information about the product please contact us via our after sales support services, details of which can be found in this manual and on the product itself. After Sales Support

TEL: 1300 889 028

Service Support

If you have any issues with the operation of your Battery or Charger, please call us on 1300 889 028 for advice, or email us at [email protected]


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

10.Environmental protection

Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an

environmentally safe way.

11.Accessories and After Sales Parts

The following is available for purchase by visiting https://help.tools/ or calling our customer service hotline on: 1300 889 028

15

1. 2323-BAT: 20V

Lithium Ion Battery

2. 2323-CH: 20V

Charger

12. FAQ/Troubleshooting

Fault

The Battery pack gets warm when charging.

Cause

It’s a result of the stepping down of the chemical reactions inside the batteries during the charging process.

Remedy

This is normal.


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

16

Undiagnosable Fault. The battery / charger needs to be repaired or replaced.

Contact Customer

Service.

For further inquiries or issues associated with your Battery or

Charger, call our Customer Service on 1300 889 028 or email us at [email protected]

13. Technical Specifications

Charger

Plug Pack Charger Model

Charger Adapter Model

Charger input

Charger output

Charging time

Protection class

Charger weight

Other Compatible Charger Models

JLH122200370S

Z10

100-240VAC~50-60Hz 15W

22VDC 370mA

Ready for use in 4-6 Hours

/II

0.49 kg

All ALDI Xfinity Plus 20V

Lithium-Ion Chargers

Battery

Voltage

Battery capacity

Battery Model Number

Battery weight

Other Compatible Battery Models

20V Max.

1.5Ah, Li-Ion

ABP1815MA

0.38 kg

All ALDI Xfinity Plus 20V

Lithium-Ion Batteries


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

This Xfinity Plus 20V Li-ion Battery and Battery Charger complies with the following Standards:

1. Charger:

Safety:

IEC60335-2-29

60335.1

60335.2.29

EMC:

EN55014-2

EN61000-3-2

EN61000-3-3

2. Battery:

IEC

17


1300 889 028 (toll free)


MODEL No.:

JLH122200370S&Z10&ABP1815MA • 2323 • 05/2019

Xfinity Li-ION 20V

Cordless drill / driver

Instruction Manual

IMPORTANT



02


2

Welcome

Congratulations in choosing to buy a Workzone® Titanium 20V Li-ion

Cordless Drill / Driver.




1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

20V Li-Ion Cordless Drill / Driver



The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. T conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.


3

CDT218XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

4

Contents

Application 5





Important information – Product care 14

Assembly 15

Operation 16

Maintenance 23

5

6

7

8

Warranty 24

Environmental protection 25




1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

CDT218XA.9 • 2323 • 05/2019

5

20V Li-ion Cordless Drill / Driver

1. Application

First time users or inexperienced operators pay particular attention to the operation of the 20V Li-ion Cordless Drill / Driver, including details of starting and stopping and correct use of the 20V Li-ion Cordless Drill / Driver on pages

15-22, as well as the maintenance instructions on page 23.

Intended use of 20V Li-ion Cordless Drill / Driver

NOTE:


This 20V Li-ion Cordless Drill / Driver is used for driving in and loosening screws as well as for drilling in wood, metal and plastic.

The tool is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse.


1 x 20V Li-Ion Cordless Drill / Driver

1 x Belt clip

1 x Double ended bit

1 x Instruction manual





WARNING!

Please read and understand this instruction manual before use and keep it for your future reference. Your product should only be passed on together with this instruction manual.

WARNING!

To reduce risk of injury, only use the supplied 20V Li-Ion battery or charger or any ALDI Xfinity Plus range of 20V Li-Ion battery packs. Other type of battery packs may burst causing personal injury and damage. The battery pack must be charged using with ALDI

Xfinity Plus 20V Li-Ion battery chargers.


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

6


1. Keyless chuck

2. Torque setting / collar

3. Two-speed gear selector

4. Forward/Reverse rotation control

5. Soft grip handle

6. Belt clip

1

2 3

7. Battery pack


9. LED light

10. Trigger switch

11. Double ended bit

10

4

5

9

8

7


1300 889 028 (toll free)

6

11


MODEL No.:

CDT218XA.9 • 2323 • 05/2019




60

Warning

Wear ear protection

Wear eye protection

Wear breathing protection

Conforms to relevant standards for electrical safety and electromagnetic compatibility.

60 Months Warranty

7

CDT218XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

8


General Power Tool Safety Warnings

WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool.

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.


The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.

1) Work area safety a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

CDT218XA.9 • 2323 • 05/2019 shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result in serious personal injury.

b) Use personal protective equipment.

Always wear eye protection. Protective equipment such as dust mask, nonskid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/ or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

9

10

f) Dress properly. Do not wear loose clothing or jewellery.

Keep your hair and clothing away from moving parts.

Loose clothes, jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles.

A careless action can cause severe injury within a fraction of a second.

4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.

If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

CDT218XA.9 • 2323 • 05/2019

11 power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free from oil and grease.

Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

5) Battery tool use and care a) Recharge only with the charger specified by the manufacturer.


b) Use power tools only with specifically designated battery packs.

Use of any other battery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.

Shorting the battery terminals together may cause burns or a fire.

d) Under abusive conditions, liquid may be ejected from the battery; avoid contact.

If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or burns.

e) Do not use a battery pack or tool that is damaged or modified.

Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

12 injury.

f) Do not expose a battery pack or tool to fire or excessive temperature.

Exposure to fire or temperature above 130 °C may cause explosion.

g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.

Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

6) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

b) Never service damaged battery packs.

Service of battery packs should only be performed by the manufacturer or authorized service providers.


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

13

Drill safety warnings

1 ) Safety instructions for all operations a) Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fasteners may contact hidden wiring or its own cord.

Cutting accessory or fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

2) Safety instructions when using long drill bits a) Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury. b) Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.

c) Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend causing breakage or loss of control, resulting in personal injury.

Screwdriver and impact wrench safety warning

1. Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock

CDT218XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

14


NOTE:

For any issuses related directly to your purchased ALDI Xfinity

Battery / charger, contact the Customer Service of the manufacturer as listed on the battery / charger packaging, manual or on the label on the battery / charger.

This drill / driver uses Lithium Ion Battery Cells. Care must be taken to ensure both the safety and life of the pack is maintained. Ensure you have read all of the safety notes in the previous pages before using the drill / driver.

Treat the battery pack with care and within the guidelines of this manual.

If the battery pack does become immersed in water or any fluids, or is subject to a severe drop or it does not operate within the guidelines of this manual or the supplied manual, immediately stop using the battery pack and have it checked.

Use only the batteries and charger included with this kit, or any

ALDI Xfinity Plus 20V Li-Ion range of batteries and chargers.


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

7. Assembly

7.1 Installing and Removing the Battery Pack(7) a) To Remove the Battery Pack (7) (See Fig. A1)

Depress the battery pack release button (8) firmly first and then slide the battery pack (7) out and away from the drill / driver.

b) To Install the Battery Pack (7) (See Fig. A2)

Slide the fully charged battery pack (7) onto the drill / driver with sufficient force until it clicks into position.

1

2

A1 A2

15

CDT218XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

16

8. Operation

8.1 Trigger Switch (10) (See Fig. B)

Press in the trigger switch (10) to start the drill / driver. Fully release pressure from the trigger switch (10) to stop the drill / driver.

The trigger switch (10) is fitted with a brake function which stops your chuck immediately when you quickly release the trigger switch (10).

It is also a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of pressure on the trigger switch (10).

WARNING: Do not operate for long periods at low speed as excess heat can be produced internally.

NOTE:

The variable speed control fitted to this drill/driver is not intended to be used for long periods of time during the operation of the task being performed. Use the variable speed to start drill/ driving and screwing tasks, and then fully depress the trigger once the task has started.

B C

8.2 Switch Lock (See Fig. C)

The trigger switch (10) can also be locked into an OFF position with the use of the forward/reverse rotational control (4). This helps to reduce the possibility of accidental starting when not in use. To lock the trigger switch (10), push the forward/reverse rotating control

(4) into the center position.In this position, the trigger switch (10) cannot be activated.


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

8.3 Forward / Reverse Rotational Selector (See Fig. D1, D2)

For drilling and screw driving use the forward rotation marked

“ ” (forward/reverse rotating control (4) is moved to the right when looking at the drill from the front) (See D1). Only use reverse rotation marked “ ” (forward/reverse rotating control (4) is moved to the left when looking at the drill from the front) (See D2) to remove screws or releasing a jammed drill bit.

WARNING: Never change the direction of rotation when the chuck is rotating, wait until it has stopped!

17

CDT218XA.9 • 2323 • 05/2019

D1 D2

8.4 Two-Speed Gear Selector (3) (See Fig. E)

The two-speed gearbox allows you to select a gear with the optimum speed and torque to suit the application.

NOTE:

When changing the two speed high / low gear selector (3), ensure the drill/driver is not operating.

1. To select the LOW gear (low speed, high torque setting), push the two-speed gear selector (3) backward,towards the back of the drill/ driver. The number “1” will be displayed.

2. To select the HIGH gear (high speed, low torque setting), push the two-speed gear selector (3) towards the chuck.The number “2” will be displayed.

Gear 1

Low speed range: for screwdriving or working with large drilling diameter


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

18

Gear 2

High speed range: for working with small drilling diameter

WARNING: To prevent gear damage, always allow the chuck to come to a complete stop before changing the direction of rotation or the two-speed gear selector.

E

8.5 Chuck Adjustment (See Fig. F)

1. Open the keyless chuck (1) by unscrewing it in an anti-clockwise direction, holding the drill/driver as shown in Fig F. Do this sufficiently enough to allow the drill/driver bit to enter the jaws of the chuck.

2. Ensure the drill/driver bit is fully inserted, so that the chuck jaws grip the straight section of the bit.Rotate the keyless chuck (1) clockwise until the jaws tighten on the drill/driver bit.The collar of the chuck needs to be tightened firmly to ensure the drill/driver bit is held securely.

To remove the drill/driver bit, rotate sharply the chuck in an anticlockwise direction, sufficiently enough to allow the drill/driver bit to be removed.

CLOSE

OPEN

F


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

8.6 Torque Adjustment (See Fig. G)

(Screw driving force of your drill / driver)

The torque is adjusted by rotating the torque setting / collar (2).

The torque is greater when the torque setting / collar (2) is set on a higher setting. The torque is less when the torque setting / collar (2) is set on a lower setting.

Make the setting as follows:

1 - 4 for driving small screws

5 - 9 for driving screws into soft material

10 - 14 for driving screws into soft and hard material

15 - 19 for driving screws into hard wood

20 - 21 for driving larger screws

for heavy drilling

19

G

CDT218XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

20

8.7 Automatic Spindle Lock (See Fig. H)

The automatic spindle lock allows you to use it as a regular screwdriver. You can give an extra twist to firmly tighten a screw, loosen a very tight screw or continue working when the battery energy has expired. For manual screwdriver purposes, the chuck is automatically locked when the tool is off.

H

8.8 Using The LED Light (9)

To turn on the LED light (9), press the trigger switch (10). When you release the trigger switch (10), the LED light (9) will turn off.LED lighting (9) increases visibility-great for dark or enclosed areas.


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

8.9 Belt Clip (6) (See Fig. I)

The side belt clip (6) is used to assist to clip the drill / driver to your waist belt while working. To install, insert the assembly screw through the belt clip screw hole into the retaining hole on the drill

/ driver, and using a philips head screwdriver (not supplied), tighten the screw by turning in a clockwise direction.

NOTE:

The belt clip (6) can be assembled onto either side of the drill.

IMPORTANT:

When attaching or replacing the belt clip (6), use only the assembly screw that is provided. Be sure to securely tighten screw.

21

CDT218XA.9 • 2323 • 05/2019

I

8.10 Drilling

When drilling into a hard smooth surface, use a center punch to mark the desired hole location. This will prevent the drill bit from slipping off center as the hole is started.

Hold the drill / driver firmly and place the tip of the bit at the point to be drilled.

Depress the trigger switch (10) to start the drill / driver.

Move the drill bit into the workpiece, applying only enough pressure to keep the bit cutting. Do not force or apply side pressure to elongate a hole.

When drilling in metal, only use HSS drill bits in good condition. Always use a magnetic bit holder when using short screwdriver bits (These bits not included).


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

22

8.11 Overload Protection

When overloaded, the motor comes to a stop. Relieve the load on the machine immediately and allow cooling for approx. 30 seconds at the highest no-load speed.

8.12 Temperature cut out

If the drill/driver is constantly overloaded, or the drill/driver is used constantly at maximum rating in high ambient conditions, the battery cells may overheat causing the battery pack to shut down.

When this occurs you will need to allow the battery cells to cool.

NOTE:

The drill/driver will not restart until the battery pack has cooled.

To reduce the temperature of the cells remove the battery pack from the drill/driver and place the battery pack in a free air environment, out of direct sunlight or any other heat source.

DO NOT force cool the pack in any way. Do not place in refrigerators or freezers.When the battery pack has cooled down it can again be used to operate the drill/driver, as long as the load or the conditions causing the original excessive temperature has been corrected.

8.13 Low voltage cut out

The battery pack used on this tool is fitted with a low voltage cut out feature within the circuitry.The low voltage cut out feature operates when the voltage drops below a preset value. This feature automatically stops the drill/driver from operating (similar to that of the overload condition). When this condition occurs you will need to either insert another battery into the drill/driver or recharge the existing battery.The low voltage cut out feature has been added to maximise the life of the battery cells in the battery. When this occurs, recharge the battery pack by following the battery charging section in this manual.

NOTE:

Attempting to restart the tool without either recharging the battery or installing another battery (with charge) will lead to drill/ driver restarting and then stopping again, after only a few seconds of operation.


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

9. Maintenance

WARNING: Remove the battery pack from the driver before carrying out any adjustment, servicing or maintenance.

Your drill / driver requires no additional lubrication or maintenance.

There are no user serviceable parts in your power tool.

Never use water or chemical cleaners to clean your power tool.

Wipe clean with a dry cloth.

Always store your power tool in a dry place.

Keep the motor ventilation slots clean.

Keep all working controls free of dust.

Occasionally you may see sparks through the ventilation slots. This is normal and will not damage your power tool.

For battery tools

The ambient temperature range for tool and battery use and storage is 0 o

C-45 o

C.


C-40 o

C.

23

CDT218XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

24

10. Warranty

Your new WORKZONE

®

TITANIUM 20V Li-ion Cordless Drill / Driver will more than satisfy your expectations.


®


TITANIUM

You will find your new 20V Li-ion Cordless Drill / Driver easy and safe to operate, and, with proper care, it will give you many years of dependable service.

CAUTION

. Carefully read through this entire instruction manual before using your new WORKZONE

®

TITANIUM 20V Li-ion Cordless

Drill / Driver. Take special care to heed the Cautions and Warnings.

Your WORKZONE

®

TITANIUM 20V Li-ion Cordless Drill / Driver has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this 20V Li-ion Cordless Drill / Driver, making it easy to maintain and operate.

Use only WORKZONE

®

TITANIUM replacement parts for your product. Non-conforming parts or modifications made to parts will void your warranty.


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019


Great care has gone into the manufacture of this product and it should therefore provide you with years of good service when used properly. In the event of product failure within its intended use over the course of the first 5 years after the date of purchase, we will remedy the problem as quickly as possible once it has been brought to our attention. In the unlikely event of such an occurrence, or if you require any information about the product please contact us via our after sales support services, details of which can be found in this manual and on the product itself.

After Sales Support TEL: 1300 889 028

Service Support

If you have any issues with the operation of your product, please call us on 1300 889 028 for advice, or email us at [email protected]


Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.

25

CDT218XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

26

12.FAQ/Troubleshooting

1. REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES

Charging time problems, as above, and having not used a battery pack for a prolonged time will reduce the battery pack working time. This can be corrected after several charge and discharge operations by charging & working with your drill. Heavy working conditions such as large screws into hard wood will use up the battery pack energy faster than lighter working conditions. Do not re-charge your battery pack below 0 o

C and above 40 o

C as this will affect performance.

2. WHY DOES THE DRILL NOT TURN ON WHEN I PRESS THE

TRIGGER SWITCH (10)?

The forward/reverse rotation control (4) may be positioned in the lock function position. Unlock the forward/reverse rotation control (4) by putting it into the required rotation position – forward or reverse.

Push the trigger switch (10) and the drill / driver will start to rotate.

3. HOW DO I SELECT DIFFERENT TORQUE POSITIONS?

Verify the torque position of the torque adjustment ring (2). You can find the torque adjustment ring (2) between the chuck (1) and the drill body. Rotate the torque adjustment ring (2) to align the numbers

(screw driving force) with the triangular indicator on the top of the drill / driver. To adjust the torque setting, rotate the torque adjustment ring (2). The higher the number, the higher the output torque.

4. HOW DO I ADJUST THE TORQUE?

To adjust the torque setting, rotate the torque adjustment ring (2).

Position 1 is the lowest torque (screw driving force) and position 21 is the highest torque (screw driving force).

Controlling the torque allows for better control when using the drill / driver on specific screwing tasks and assists in preventing overfastening and over-tightening.


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

CDT218XA.9 • 2323 • 05/2019

27

For setting the torque position, first select a low setting on the torque adjustment ring (2) and align the selected number with the triangular indicator on the top of the drill / driver.

Slowly increase the torque setting to the desired level. It is suggested to test the setting on scrap material first.

5. HOW DO I SELECT DRILL FUNCTION?

When using the drilling function the torque control has no effect to the output of the drill. The drill function is used when using the drill to drill holes in metal, non ferrous material, wood, plastic and similar materials.

Rotate the torque adjustment ring (2) so the symbol of the drill bit aligns with the triangular indicator on the top of the drill / driver.

6. HOW DO I USE THE 2 GEARS ON THE DRILL?

To select LOW speed (mark is 1) (e.g. low speed, high torque setting), push the gear selector forward, towards the chuck. The number “1” will be displayed.

To select the HIGH speed (mark is 2) (e.g. high speed, low torque setting), push the gear selector backwards. The number “2” will be displayed.

NOTE:

The gears cannot be changed if the on off switch (10) is depressed.

7. WHAT IS THE FUNCTION OF THE FORWARD/REVERSE SWITCH?

Forward/Reverse rotation control (4) allows you to change the direction of the motor while the trigger switch (10) is not depressed.

Drill / driving uses the forward mode. The reverse mode is intended for the removal of screws and assisting to remove jammed drill/driver bits.

8. WHAT DO I DO IF I HAVE AN ISSUE WITH MY DRILL?

If you have any issues with your drill / driver, please contact our

Customer Service line on 1300 889 028.


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

28


Voltage

No load speed

Number of clutch positions

Max torque

Chuck capacity

Max. drilling capacity

Steel

Wood

Machine weight

Product Dimensions (L x W x H):

20V d.c.

0-400/0-1500/min

21+1

28 N.m

10 mm

10 mm

25 mm

0.9 Kg

190x75x225 mm

This 20V Li-ion Cordless Drill / Driver complies with the following Standards:

MD: EN62841-1

EN62841-2-1

AS/NZS62841-1

AS/NZS62841-2-1

EMC: EN55014-1

EN55014-2


1300 889 028 (toll free)


MODEL No.:

CDT218XA.9 • 2323 • 05/2019

Xfinity Li-ION 20V

Impact Driver

Instruction Manual

IMPORTANT



03


2

Welcome

Congratulations in choosing to buy a Workzone® Titanium 20V Li-ion

Cordless Impact Driver.




1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

20V Li-Ion Cordless Impact driver





3

CID180XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

4

Contents

Application 5






Assembly 14

Operation 16

Maintenance 20

5

6

7

8

Warranty 21





1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

CID180XA.9 • 2323 • 05/2019

20V Li-ion Cordless Impact driver

1. Application

First time users or inexperienced operators pay particular attention to the operation of the 20V Li-ion Cordless Impact Driver, including details of starting and stopping and correct use of the 20V Li-ion Cordless Impact

Driver on pages 14-19, as well as the maintenance instructions on page 20.

Intended use of 20V Li-ion Cordless Impact Driver

NOTE:


This 20V Li-ion Cordless Impact Driver is used for fastening and loosening of bolts, nuts and various threaded fasteners. This tool is not intended for use as a drill.

The tool is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse.


1 x 20V Li-Ion Cordless Impact Driver

1 x Belt clip + assembly screw (not fitted)

1 x 50mm drill bit






WARNING!


WARNING!

To reduce risk of injury, only use the supplied 20V Li-

Ion battery and charger included in this kit or any 20V Li-Ion ALDI

Xfinity Plus range of 20V Li-Ion battery packs. Other type of battery packs may burst causing personal injury and damage. The battery pack must be charged using with ALDI Xfinity Plus 20V Li-Ion battery chargers.


5

1300 889 028 (toll free) e-mail: [email protected]

MODEL No.:

CID180XA.9 • 2323 • 05/2019

5

6


1. Forward/Reverse Selector

2. Trigger Switch

3. Soft Grip Handle

4. Belt Clip

5. Battery Pack

6. Battery Pack Release Button

7. LED light

8. Hex Drive

8

2

1

3

7

6

5

4


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019




Warning

60

Wear ear protection

Wear eye protection



60 Months Warranty

7

CID180XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

8






The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.








Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.




Water entering a power tool will increase the risk of electric


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

CID180XA.9 • 2323 • 05/2019 shock.


















1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

9

10

















If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

CID180XA.9 • 2323 • 05/2019

11 power tools.

















Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

12 injury.










1. Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019


NOTE:

For any issuses related directly to your purchased ALDI Xfinity battery / charger, contact the customer service of the manufacturer as listed on the battery / charger packaging, manual or on the label on the battery / charger.

This Impact Driver uses Lithium Ion battery cells. Care must be taken to ensure both the safety and life of the pack is maintained. Ensure you have read all of the safety notes in the previous pages before using the

Impact Driver.



Use only the batteries and charger included with this kit, or any ALDI

Xfinity Plus 20V Li-Ion range of batteries and chargers.

13

CID180XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

14

7. Assembly

7.1 Inserting A Bit Holder, Socket Or Screwdriver Bit

(See Fig. A)

Pull the hex drive (8) sleeve (a) forward. Fully insert the desired bit into the hex drive (8) and release the sleeve (a).

NOTE:

To ensure the bit is secure, try pulling the bit after releasing the sleeve (a) to make sure the bit is fully locked in the hex drive (8).

7.2 Removing A Bit Holder, Socket Or Screwdriver Bit

(See Fig. B)

Pull the hex drive (8) sleeve (a) forward. Remove the bit out of the hex drive (8) and release the sleeve (a).

A B

a a


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

7.3 Installing and Removing the Battery Pack a) To Remove the Battery Pack (5) (See Fig. C1)

Depress the battery pack release button (6) firmly, then slide the battery pack (5) out away from the tool.

b) To Install The Battery Pack (5) (See Fig. C2)

Slide the fully charged battery pack (5) onto the tool with sufficient force until it clicks into position.

1

C1

2

C2

15

CID180XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

16

8. Operation

8.1 Trigger Switch (2) (See Fig. D)

Press in the trigger switch (2) to start the Impact Driver, and fully release pressure off the trigger switch (2) to stop the Impact Driver.

The trigger switch (2) is fitted with a brake function which stops the chuck / hex drive immediately when you quickly release the trigger switch (2).

The trigger switch (2) also operates the variable speed by applying various pressure to the trigger. Higher speed and torque results with increased trigger pressure. Speed is controlled by the amount of pressure applied to the trigger switch (2).

WARNING: Do not operate for long periods at low speed as excess heat can be produced internally in the motor.

D

8.2 Forward / Reverse Selector (See Fig. E1, E2)

For fastening bolts or nuts, press the forward / reverse selector (1) as marked “ ” (forward/reverse selector (1) is moved to the right as shown in Fig. E1). For reverse rotation marked “ ” the forward/ reverse selector (1) is moved to the left as shown in Fig. E2, to loosen or remove bolts or nuts fullstop.

WARNING: Never change the direction of rotation when the chuck is rotating, wait until it has stopped!


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

E1 E2

8.3 Trigger Switch (2) Lock (See Fig. F)

The trigger switch (2) can be locked into the OFF position. This helps to reduce the possibility of accidental starting when not in use. To lock the trigger switch (2), push the forward/reverse selector (1) into the centre position.

F

8.4 Using The LED Light (7)

To turn on the LED light (7), press the trigger switch (2). When you release the trigger switch (2), the LED light (7) will turn off.LED lighting (7) increases visibility - great for dark or enclosed areas.

CID180XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

17

18

8.5 Belt Clip (4) (See Fig. G)

The side belt clip (4) is used to assist to clip the Impact Driver to your waist belt while working. To install, insert the assembly screw through the belt clip screw hole into the retaining hole on the

Impact Driver, and using a philips head screwdriver (not supplied), tighten the screw by turning in a clockwise direction

NOTE:

The belt clip (4) can be assembled onto either side of the

Impact Driver.

IMPORTANT:


G

8.6 Overload Protection

When in overload condition, the motor will come to a stop. Reduce the load on the machine immediately and allow to cool for approx.

30 seconds at the highest no-load speed.

8.7 Temperature Cut Out

If the Impact Driver is constantly overloaded, or the Impact Driver is used constantly at maximum rating in high ambient conditions, the battery cells may overheat causing the battery pack to shut down.

When this occurs you will need to allow the battery cells to cool.

NOTE:

The Impact Driver will not restart until the battery pack has cooled.

To reduce the temperature of the cells remove the battery pack from the Impact Driver and place the battery pack in a free air


18

1300 889 028 (toll free) e-mail: [email protected]

MODEL No.:

CID180XA.9 • 2323 • 05/2019

19 environment, out of direct sunlight or any other heat source.

DO NOT force cool the pack in any way. Do not place in refrigerators or freezers.

When the battery pack has cooled down it can again be used to operate the Impact Driver, as long as the load or the conditions causing the original excessive temperature has been corrected.

8.8 Low Voltage Cut Out

The battery pack used on this tool is fitted with a low voltage cut out feature within the circuitry.

The low voltage cut out feature operates when the voltage drops below a preset value. This feature automatically stops the Impact

Driver from operating (similar to that of the overload condition).

When this condition occurs you will need to either insert another battery into the Impact Driver or recharge the existing battery.

The low voltage cut out feature has been added to maximise the life of the battery cells in the battery. When this occurs, recharge the battery pack by following the battery charging section in this manual.

NOTE:

Attempting to restart the tool without either recharging the battery or installing another battery (with charge) will lead to

Impact Driver restarting and then stopping again, after only a few seconds of operation.

CID180XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

20

9. Maintenance

WARNING: Remove the battery pack from the driver before carrying out any adjustment, servicing or maintenance.

Your power tool requires no additional lubrication or maintenance.

There are no user serviceable parts in your power tool.

Never use water or chemical cleaners to clean your power tool.

Wipe clean with a dry cloth.

Always store your power tool in a dry place.

Keep the motor ventilation slots clean.

Keep all working controls free of dust.

Occasionally you may see sparks through the ventilation slots. This is normal and will not damage your power tool.



C-45 o

C.


C-40 o

C.


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

21

10. Warranty

Your new WORKZONE

®

TITANIUM 20V Li-ion Cordless Impact Driver will more than satisfy your expectations.


®


TITANIUM

You will find your new 20V Li-ion Cordless Impact Driver easy and safe to operate, and, with proper care, it will give you many years of dependable service.

CAUTION. Carefully read through this entire instruction manual before using your new WORKZONE

®

TITANIUM 20V Li-ion Cordless

Impact Driver. Take special care to heed the Cautions and Warnings.

Your WORKZONE

®

TITANIUM 20V Li-ion Cordless Impact Driver has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this 20V Li-ion Cordless Impact Driver, making it easy to maintain and operate.

Use only WORKZONE

®


CID180XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

22




Service Support





1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

CID180XA.9 • 2323 • 05/2019

23

12.FAQ/Troubleshooting

1. REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES

Charging time problems, as above, and having not used a battery pack for a prolonged time will reduce the battery pack working time.

This can be corrected after several charge and discharge operations by charging & working with your driver. Heavy working conditions such as large screws into hard wood will use up the battery pack energy faster than lighter working conditions. Do not re-charge your battery pack below 0 performance.

o

C and above 40 o

C as this will affect

2. WHY DOES THE DRIVER NOT TURN ON WHEN I PRESS THE

TRIGGER SWITCH (2)?

The forward/reverse selector (1) is positioned in the lock function.

Unlock the forward/reverse selector (1) by putting it into the required rotation position. Push the trigger switch (2) and the driver will start to rotate.

3. WHAT IS THE FUNCTION OF THE FORWARD/REVERSE

SELECTOR (1)?

Forward/reverse selector (1) allows you to change the direction of the motor while the trigger switch (2) is not depressed.

Driving uses the forward mode. The reverse mode is intended for the removal of bolts, nuts and various threaded fasteners.

4. WHAT DO I DO IF I HAVE AN ISSUE WITH MY DRIVER?

If you have any issues with your driver, please contact our Customer

Service line on 1300 889 028.


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

24


Rated voltage

Rated no-load speed

Impact rate

Max torque

Chuck size

Machine weight


20V d.c.

0-2600/min

3400 bpm

110 N.m

1/4” hex

0.91 kg

155x80x225 mm

This 20V Li-ion Cordless Impact Driver complies with the following Standards:

Safety: EN62841-1

EN62841-2-2

AS/NZS62841.1

AS/NZS62841.2.2

EMC: EN55014-1

EN55014-2


1300 889 028 (toll free)


MODEL No.:

CID180XA.9 • 2323 • 05/2019

Xfinity Li-ION 20V

165mm Circular Saw

Instruction Manual

IMPORTANT



04


2

Welcome

Congratulations in choosing to buy a Workzone® Titanium Xfinity Plus

20V Li-Ion 165mm Circular Saw.




1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

20V Li-Ion 165mm Cordless Circular Saw





3

CSC165XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

4

Contents

Application 5




Product Safety

Safety instructions for all saws

Important information – Product care

Assembly 17

Operation 18

Maintenance 23

Warranty 23



Technical Specifications

24

28

13

16

8

9

5

6


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

CSC165XA.9 • 2323 • 05/2019

5

20V Li-Ion 165mm Cordless Circular Saw

1. Application

First time users or inexperienced operators pay particular attention to the operation of the 20V Li-Ion 165mm Circular Saw, including details of starting and stopping and correct use of the 20V Li-Ion 165mm Circular Saw on pages 18-22, as well as the maintenance instructions on page 23.

Intended use of 20V Li-Ion 165mm Circular Saw

NOTE:


The 20V Li-Ion 165mm Circular Saw is intended for light use around the home and domestic applications. It is particularly useful for trimming plywood and similar sheet material. It is NOT suitable for metal cutting blades or discs.


1 x 20V Li-Ion 165mm Circular Saw

1 x 5mm Hex key

1 x Saw blade

1 x Parallel guide

1 x Dust Extraction adapter






WARNING!


WARNING!

To reduce risk of injury, only use the ALDI Xfinity Plus range of 20V Li-Ion battery packs. Other type of battery packs may burst causing personal injury and damage. The battery pack must be charged using with ALDI Xfinity Plus 20V Li-Ion battery chargers.


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

6


1. Lock-Off Button

2. Trigger Switch

3. Front Handle

4. Spindle Lock Button

5. Base Plate Angle Scale

6. Base Plate Bevel Lock Knob

7. Parallel Guide Lock Knob

8. Cutting Mark - 45°

9. Cutting Mark - 0°

10. Parallel Guide

11. Base Plate

12. Lower Guard Lever

13. Lower Blade Guard

14. Fixed Guard

15. Dust Extraction Adapter

16. Battery Pack

17. Battery Pack Release Button

18. Inner Flange (See Fig. B3)

19. Saw Blade

20. Outer Flange (See Fig. B3)

21. Blade Bolt (See Fig. B3)

22. Cutting Depth Scale (See Fig. C)

23. Cutting Depth Lock Knob (See Fig. C)

24. Hex key (See Fig. K)

25. Blade rotation indicator

26. Main handle

27. Spindle

28. Parallel guide notches


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

3 1 2 26

5

6

7

8

9

10 28 25 27

4

CSC165XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

13

17

16

15

14

12

19

11

7

8




Warning

Wear ear protection

Wear eye protection


60


60 Months Warranty

Wear protective gloves when handling the saw blade.

The blade has sharp edges.


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

CSC165XA.9 • 2323 • 05/2019

5. Product Safety

General safety warnings

WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool.



The term “power tool” in the warnings refers to your mains-operated

(corded) power tool or battery-operated (cordless) power tool.








Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.




Water entering a power tool will increase the risk of electric shock.


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

9

10



















1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

CSC165XA.9 • 2323 • 05/2019
















If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

11

12

















Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

CSC165XA.9 • 2323 • 05/2019









Safety instructions for all saws a) DANGER: Keep hands away from cutting area and the blade. Keep your second hand on auxiliary handle, or motor housing.

If both hands are holding the saw, they cannot be cut by the blade.

b) Do not reach underneath the workpiece.

The guard cannot protect you from the blade below the workpiece.

c) Adjust the cutting depth to the thickness of the workpiece.

Less than a full tooth of the blade teeth should be visible below the workpiece.

d) Never hold workpiece in your hands or across your leg while cutting.

Secure the workpiece to a stable platform. It is important to support the work properly to minimise body exposure, blade binding, or loss of control.

e) Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting tool


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

13

14

may contact hidden wiring or its own cord.

Contact with a

“live” wire will also make exposed metal parts of the power tool

“live” and could give the operator an electric shock.

f) When ripping always use a rip fence or straight edge guide.

This improves the accuracy of cut and reduces the chance of blade binding.

g) Always use blades with correct size and shape (diamond versus round) of arbour holes.

Blades that do not match the mounting hardware of the saw will run off-centre, causing loss of control.

h) Never use damaged or incorrect blade washers or bolt.

The blade washers and bolt were specially designed for your saw, for optimum performance and safety of operation.

Further safety instructions for all saws

Kickback causes and related warnings

— kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator;

— when the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator;

— if the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig into the top surface of the wood causing the blade to climb out of the kerf and jump back toward the operator.

Kickback is the result of saw misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below.

a) Maintain a firm grip with both hands on the saw and position your arms to resist kickback forces. Position your body to either side of the blade, but not in line with the blade.

Kickback could cause the saw to jump backwards, but


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

CSC165XA.9 • 2323 • 05/2019

15 kickback forces can be controlled by the operator, if proper precautions are taken.

b) When blade is binding, or when interrupting a cut for any reason, release the trigger and hold the saw motionless in the material until the blade comes to a complete stop.

Never attempt to remove the saw from the work or pull the saw backward while the blade is in motion or kickback may occur.

Investigate and take corrective actions to eliminate the cause of blade binding.

c) When restarting a saw in the workpiece, centre the saw blade in the kerf and check that saw teeth are not engaged into the material.

If saw blade is binding, it may walk up or kickback from the workpiece as the saw is restarted.

d) Support large panels to minimise the risk of blade pinching and kickback.

Large panels tend to sag under their own weight. Supports must be placed under the panel on both sides, near the line of cut and near the edge of the panel.

e) Do not use dull or damaged blades.

Unsharpened or improperly set blades produce narrow kerf causing excessive friction, blade binding and kickback.

f) Blade depth and bevel adjusting locking levers must be tight and secure before making cut.

If blade adjustment shifts while cutting, it may cause binding and kickback.

g) Use extra caution when sawing into existing walls or other blind areas.

The protruding blade may cut objects that can cause kickback.

Safety instructions for circular saw with inner pendulum guard

Lower guard function a) Check lower guard for proper closing before each use. Do not operate the saw if lower guard does not move freely and close instantly. Never clamp or tie the lower guard into the open position.

If saw is accidentally dropped, lower guard may be bent. Raise the lower guard with the retracting


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

16 handle and make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut.

b) Check the operation of the lower guard spring. If the guard and the spring are not operating properly, they must be serviced before use.

Lower guard may operate sluggishly due to damaged parts, gummy deposits, or a build-up of debris.

c) Lower guard may be retracted manually only for special cuts such as “plunge cuts” and “compound cuts.”

Raise lower guard by retracting handle and as soon as blade enters the material, the lower guard must be released. For all other sawing, the lower guard should operate automatically.

d) Always observe that the lower guard is covering the blade before placing saw down on bench or floor.

An unprotected, coasting blade will cause the saw to walk backwards, cutting whatever is in its path. Be aware of the time it takes for the blade to stop after switch is released.

ADDITIONAL SAFETY RULES FOR YOUR CIRCULAR SAW

1. Only use saw blades recommended in the specification.

2. Do not use any abrasive wheels.

3. Use only blade diameter(s) in accordance with the markings.

4. Identify the correct saw blade to be used for the material to be cut.

5. Use only saw blades that are marked with a speed equal or higher than the speed marked on the tool.


NOTE:

For any issues related directly to your 20V Li-Ion 165mm

Circular Saw, contact the Customer Service of the manufacturer as listed on the packaging, manual or on the label on the cordless circular saw.

This 20V Li-Ion 165mm Circular Saw uses Lithium Ion Battery Cells.

Care MUST be taken to ensure both the safety and life of the pack is maintained. Ensure you have read all of the safety notes in the


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

previous pages before using the 20V Li-Ion 165mm Circular Saw.


If the battery pack does become immersed in water or any fluids, or is subject to a severe drop or it does not operate within the guidelines of this manual or the supplied manual, immediately STOP using the battery pack and have it checked.

7. Assembly

NOTE:

Before using the tool, read the instruction manual carefully.

7.1 To remove the battery pack (See Fig. A1)

Depress the battery pack release button (17) firmly, then slide the battery pack (16) out away from the tool.

7.2 To install the battery pack (See Fig. A2)

Slide the fully charged battery pack (16) onto the tool with sufficient force until it clicks into position.

A1 A2

17

CSC165XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

18

8. Operation

8.1 Changing The Saw Blade (See Fig. B1, B2, B3)

WARNING: Before undertaking any maintenance or adjustment, ensure the battery is removed.

Wear protective gloves when mounting the saw blade.

Danger of injury when touching the saw blade.

Only use saw blades that correspond with the technical specification data for this tool.

Do not under any circumstances use grinding discs as the cutting tool.

For changing the saw blade, it is best to place the machine on with the motor end cap on a flat surface with the blade and blade guard area facing upwards.

B1 B2 B3

Removing the saw blade

WARNING:

Always ensure that the saw is switched of and the battery pack (16) is removed before making any adjustments.

Press the spindle lock button (4) and keep it depressed.

The spindle lock button (4) may be activated only when the saw blade (19) is at a standstill.

Loosen the blade bolt (21) in a clockwise direction using the supplied hex key (24). Remove the outer flange (20). Using the lower


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

CSC165XA.9 • 2323 • 05/2019 guard lever (12), tilt back the lower blade guard (13) and hold it firmly in this position. Remove the saw blade (19).(See Fig.B1,B2)

Mounting the saw blade

WARNING:

Always ensure that the saw is switched off and the battery pack (16) is removed before making any adjustments.

Clean the saw blade (19) inner flange (18), outer flange (20) and the blade bolt (21). Using the lower guard lever (12), tilt back the lower blade guard (13) and hold it firmly in this position. Place the saw blade (19) onto the inner flange (18). Ensuring that the direction of the cutting teeth on the saw blade match the direction of the blade rotation indicator (25), place the blade over the outer flange (20) then insert the blade bolt (21). Press in the spindle lock button (4) to lock the spindle (27), then use the supplied hex key (24) to tighten the blade bolt (21) in an anti-clockwise direction with 1/4 turn more than finger tight.

NOTE: Take care that the mounting positions of the inner flange and outer flange are correct.( See Fig.B3)

NOTE: When mounting: Ensure that the cutting direction of the teeth (direction of arrow on saw blade) and the blade rotation indicator (25) on the blade guard match.

8.2 Adjusting the cutting depth (See Fig. C)

WARNING:


Turn the cutting depth lock knob (23) in an anti-clockwise direction, and raise the saw body away from the base plate (11). Set the depth of cut using the cutting depth scale (22) and then turn the cutting depth lock knob (23) in a clockwise direction to lock. Always add

3mm to your depth of cut so that the blade can cut through the material.


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

19

20

8.3 Base plate angle adjustment (See Fig. D1, D2)

WARNING:


Turn the base plate bevel bevel lock knob (6) in an anti-clockwise direction to loosen the angle scale. Tilt the base plate (11) away from the machine until the required cutting angle is adjusted on the base plate angle scale (5). Tighten the base plate bevel lock knob (6) by turning it in a clockwise direction. Do not use the cutting depth scale (22) when making bevel cuts due to possible inaccuracy.

C D1 D2

22

23

8.4 Dust/chip extraction (See Fig. E)

WARNING:


To attach the dust extraction adapter (15), place over the dust extraction port recess area, lining up the screw holes on the adapter and the holes on the recess. Insert the assembly screws and tighten in a clockwise direction using a philips head screwdriver (not supplied). Ensure the fit is secure.

To remove the dust extraction adapter (15), loosen the assembly screws using a philips head screwdriver (not supplied) in an anticlockwise direction. Remove the screws, and remove the dust extraction adapter (15) from the recess.

Directly connect a suitable vacuum hose to the adapter.

NOTE:

There is an arrow on the surface of the adapter which shows which direction to tighten on the hose.


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

The dust extraction adapter (15) must not be mounted when there is no external dust extraction connected.

Otherwise there is danger of the extraction system becoming clogged.

Clean the dust extraction adapter (15) regularly to ensure optimum dust extraction. The vacuum cleaner / dust extraction device must be suitable for the material to be worked.

8.5 Hand grip position (See Fig. F)

Always hold your saw firmly with both hands when operating.

E F

21

CSC165XA.9 • 2323 • 05/2019

8.6 Switching on and off (See Fig. G)

Your switch is locked off to prevent accidental starting. Depress the lock off button (1) then press in the trigger switch (2) and release the lock off button (1). The power is now locked on. To switch off, just release the trigger switch (2).

The blade may continue to rotate after switching off. Wait until the machine comes to a complete stop before setting down.

8.7 Cutting guide (See Fig. H1, H2)

WARNING:

Always ensure that the saw is switched of and the battery pack (16) is removed before making any adjustments.

There are 2 x cutting mark notches (8 -45°, 9 - 0°) on the front of the base plate for use with the parallel guide (10). For straight cuts, use the 0º cutting mark (9) to align with your parallel guide scale. For a

45º bevel cut, use the 45º cutting mark (8) to align the the parallel guide scale. Always make a trial cut to check the setting.


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

22

G H1 H2

0 o

45 o

8.8 Parallel guide adjustment (See Fig. I)

WARNING:


This is used for making cuts parallel to a workpiece edge at a chosen distance. Slide the parallel guide (10) arm through the fixture to achieve the required cutting distance then tighten the parallel guide locking knob (7) in a clockwise direction to clamp. It can be used from both sides of the base plate (11). For straight cuts, use the 0° guide mark to align with the parallel guide scale. For a 45° bevel cut, use the

45° cutting mark (8) to align with your parallel guide scale. Securely clamp the parallel guide (10).

NOTE:

It is best to carry out a trial cut before cutting your work piece.

8.9 Bevel cuts (See Fig. J1, J2)

Set the required bevel angle between 0° and 45°. Do not use the depth of cut scale when making bevel cuts due to possible inaccuracy.

J1 J2

I


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

8.10 Hex key storage (See Fig. K)

The supplied hex key (24) provided can be placed in the area under the machine motor.

K

24

23

CSC165XA.9 • 2323 • 05/2019

9. Maintenance

WARNING! Always ensure that the cordless circular saw is switched off and the battery pack is removed before making any adjustment.


There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you may see sparks through the ventilation slots.

This is normal and will not damage your power tool.

10. Warranty

Your new WORKZONE

®

TITANIUM 20V Li-Ion 165mm Circular Saw will more than satisfy your expectations.


®

TITANIUM


You will find your new 20V Li-Ion 165mm Circular Saw easy and safe


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

24 to operate, and, with proper care, it will give you many years of dependable service.


®

TITANIUM 20V 165mm Circular

Saw. Take special care to heed the Cautions and Warnings.

Your WORKZONE

®

TITANIUM 20V Li-Ion 165mm Circular Saw has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this 20V Li-Ion 165mm Circular Saw, making it easy to maintain and operate.

Use only WORKZONE

® void your warranty.

TITANIUM replacement parts for your product. Non-conforming parts or modifications made to parts will

11. Environmental protection




In the event of product failure within its intended use over the course of as quickly as possible once it has been brought to our attention. In the unlikely event of such an occurrence, or if you require any information about the product please contact us via our after sales support services, details of which can be found in this manual and on the product itself.



1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

Service Support


Accessories and After Sales Parts

The following is available for purchase by visiting https://help.tools/ or calling our customer service hotline on: 1300 889 028

25

CSC165XA.9 • 2323 • 05/2019

1. CSC165XA.9-BL: 165mm Blade


Working Hints For Your Cordless Circular Saw

• Always use a blade suited to the material and material thickness to be cut.

The quality of cut will improve as the number of blade teeth increase.

• Always ensure the work-piece is firmly held or clamped to prevent movement.

• Support large panels close to the cut line. Any movement of the material may affect the quality of the cut.

The blade cuts on the upward stroke and may chip the uppermost

surface or edges of your work piece when cutting,

• Ensure the upper surface is a non visible surface of your work piece.


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

26

Troubleshooting

Fault


Cause Remedy


This is normal.

Low battery.

Return the tool to a service centre for repair or contact Customer

Service.

Charge the battery.

The machine does not start up when operating the on/off switch.

Defective motor.

Contact Customer

Service.

Cutting depth is less than is set.

Blade spins or slips

Blade does not cut a straight line.

Blade kicks back when beginning a cut.

Sawdust accumulated at the rear of the base.

Blade is not tightly engaged with the spindle.

Blade is dull.

Blade is not mounted properly.

Saw is not being guided properly.

Shake out sawdust.

Consider connecting a vacuum for dust collection.

Re-assemble the blade as described in ASSEMBLY section.

Mount a new, sharp blade on the saw.

Check that blade is properly mounted.

Use a parallel guide.

Blade is not spinning fast enough.

Allow the saw blade to reach full speed prior to beginning a cut in the material.


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

Significantly reduced cutting efficiency.

Low battery.

Worn blade.

Defective motor.

Charge the battery.

Replace a new blade.

Contact Customer

Service.

The machine is blocked frequently.

Large size of iron piece in the workpiece (eg nail).

Low battery.

Defective motor.

Blade guard cannot open or rebound.

During use, the machine cannot push forward.

Defective guard.

Workpiece is blocking the machine.

Check the workpiece.

Charge the battery.

Contact Customer

Service.

Contact Customer

Service.

Check the workpiece.

For further inquiries or issues associated with your tool, call our

Customer Service on 1300 889 028 or email us at info. [email protected]

27

CSC165XA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

28

13. Technical specifications

Voltage

No load speed

Blade size

Cutting capacity:

- Max. Cutting depth at 90°

- Max. Cutting depth at 45°

Blade Teeth

Blade Bore

Blade – Width of cut

Bevel capacity

Machine weight

Product Dimensions (L x W x H)

20V d.c.

4000/min

165mm

53mm

36mm

24T

20mm

1.6mm

0-45 o

2.54kg

340 x230 x255mm

This 20V 165mm Circular Saw complies with the following

Standards:

Safety:

EN62841-1

EN62841-2-5

AS/NZS62841.1

AS/NZS62841.2.5

EMC:

EN55014-1

EN55014-2


1300 889 028 (toll free)


MODEL No.:

CSC165XA.9 • 2323 • 05/2019

Xfinity Li-ION 20V

Cordless Sander

Instruction Manual

IMPORTANT



05


2

Welcome

Congratulations in choosing to buy a Workzone® Titanium 20V Li-Ion

Cordless Detail Sander.




1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

20V Li-Ion Cordless Detail Sander





3

CPS18WA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

4

Contents

Application 5




Product Safety


Operation 16

Maintenance 17

Warranty 18


5

6

7

8

12

Assembly 13

Accessories and after sales parts

19

19

Frequently Asked Questions 20

Troubleshooting 21



1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

CPS18WA.9 • 2323 • 05/2019

5

20V Li-Ion Cordless Sander

1. Application

First time users or inexperienced operators pay particular attention to the operation of the 20V Li-Ion Cordless Sander, including details of starting and stopping and correct use of the 20V Li-Ion Cordless Detail Sander on pages


Intended use of 20V Li-Ion Cordless Detail Sander

NOTE:

This product is for private domestic DIY use only.

It is not suitable for commercial or trade use.

This 20V Li-Ion Cordless Detail Sander is used for dry sanding of wood, plastic, filler and coated surfaces.

The sander is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse.


1 x 20V Li-Ion Cordless Detail Sander Skin

1 x Dust bag

3 x Sanding paper (60G/80G/120G)

1 x Finger pad

3 x Finger sanding paper (60G/80G/120G)




WARNING!


WARNING!

To reduce risk of injury, only use the supplied 20V Li-Ion battery or charger or any ALDI Xfinity Plus 20V Li-Ion battery packs.

Other type of battery packs may burst causing personal injury and damage. The battery pack must be recharged only with the supplied 20V

Li-Ion charger or any ALDI Xfinity Plus 20V Li-Ion battery chargers.


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

6

6

7

2

1


1. On-off switch

2. Soft grip handle

3. Battery pack

4. Dust bag

5. Detail sanding plate

6. Base locking lever

7. SDS Finger pad


1300 889 028 (toll free)

8. Dust bag port

9. Hook and Loop base

10. 3 x Sanding paper

(60G/80G/120G )

11. 3 x Finger sanding paper

(60G/80G/120G)


5

9

10

11


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

3

12

4

8




Warning

Wear ear protection

Wear eye protection


60


60 Months Warranty

7

CPS18WA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

8

5. Product Safety





The term “power tool” in the warnings refers to your mains-operated

(corded) power tool or battery-operated (cordless) power tool.








Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.




Water entering a power tool will increase the risk of electric shock.


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

CPS18WA.9 • 2323 • 05/2019



















1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

9

10
















If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

CPS18WA.9 • 2323 • 05/2019

11

















Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

12










For any issuses related directly to your Battery / charger, contact the Customer Service of the manufacturer as listed on the battery / charger packaging, manual or on the label on the battery / charger.

This Detail Sander uses Lithium Ion Battery Cells. Care MUST be taken to ensure both the safety and life of the pack is maintained. Ensure you have read all of the safety notes in the previous pages before using the

Detail Sander.



Use only the batteries and charger included with this kit, or any

ALDI 20V Li-Ion Xfinity Plus batteries and chargers.


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

7. Assembly

NOTE:

Before using the tool, read the instruction book carefully.

7.1. Fitting The Sanding Paper (See Fig. A1, A2)

WARNING:

Always ensure that the sander is switched off and the battery pack is removed before making any adjustments.

Fit the sanding paper (10) over the hook and loop base (9) so that it covers the entire area. Make sure the sanding paper (10) is even with the edges of the sanding plate (5), and that the dust collection holes in the hook and loop base (9) and sanding paper (10) are aligned.

WARNING:

Never use your sander without sandpaper (10) applied to the detail sanding plate (5)

NOTE:

Before fitting a new sanding sheet, remove any dust and dirt from the detail sander plate.

A1 A2

13

CPS18WA.9 • 2323 • 05/2019

7.2. Attaching the dust bag (See Fig. B)

WARNING:


Your sander is equipped with a dust bag (4). To attach, insert the dust bag (4) into the dust bag port (8) fully until the dust bag (4) is securely in place.

WARNING:

To prevent the possibility of sanding dust or foreign body being thrown into your face or eyes, never


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

14 attempt to use your sander without the dust bag properly installed.

NOTE:

Always wear a dust mask.

7.3. Emptying / Removing the dust bag (See Fig. C)

WARNING:


For more efficient operation, empty the dust bag (4) after every

5-10 minutes of operation. This will permit the air to flow through the dust bag (4) more effectively. Pull the dust bag (4) out and away from the rear of the detail sander, and shake out the dust from the dust bag (4). It is recommended to clean the dust bag (4) regularly for better performance.

B C

7.4. SDS finger pad (See Fig. D1, D2, D3)

WARNING:


1) To access the finger pad (7), raise the base locking lever (6) upwards towards the top of the sander.

2) Pull the SDS finger pad (7) out.

3) To re-secure the SDS finger pad (7) in position, push the base locking lever (6) down until secure.


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

15

D1 D2 D3

CPS18WA.9 • 2323 • 05/2019

7.5. Selecting the right sand paper

Selecting the correct grit of sandpaper is an extremely important decision that will allow you to achieve the best quality sanding finish.

Coarse grit will remove the most material and finer grit will give you the best finish in all sanding operations. The condition of the surface to be sanded will determine which grit will do the job.

If the surface is rough, start with coarse grit and sand until the surface is uniform. Then use a medium grit to remove any scratches left by the coarse grit. Complete using a finer grit for finishing the surface.

NOTE: Always continue sanding with each grit until the surface is uniform.

7.6 To install the battery pack (See Fig. E1)

WARNING:

Ensure the on/off switch (1) is in the OFF position before attaching the battery pack.

Slide the fully charged battery pack (3) onto the sander with sufficient force until it clicks into position.

7.7 To remove the battery pack (See Fig. E2)

Depress the battery pack release button (12) firmly, then slide the battery pack (3) out and away from the sander.


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

16

E1

1

2

E2

8. Operation

8.1. On/Off Switch (See Fig. F)

To start the sander, press the on/off switch (1) on the position marked “I”.

To stop the sander, press the on/off switch (1) on the position marked “O”.

F

8.2. Flush sanding facility (See Fig. G)

Your sander can sand flush on three sides of the sanding plate which allows easy access to corners and edges.

G


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

8.3. Orbital sanding

Your sander operates in small circular rotations which allows efficient material removal.

Operate the sander in long sweeping movements across your workpiece and even across the grain. For a finer finish, always use a fine grain sandpaper and only move the sander in the direction of the grain and never across the grain.

Do not allow the sander to remain in the same position otherwise you will remove material and create an uneven surface.

8.4. SDS finger pad (See fig. H1, H2)

This sander has a finger pad (8), which is suitable for fine sanding in corners, edges, or hard-to reach areas. Start the sander then apply the finger pad to the work piece.

H1 H2

17

CPS18WA.9 • 2323 • 05/2019

9. Maintenance

Remove the battery pack from the tool before carrying out any adjustment, servicing or maintenance.


There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you may see sparks through the ventilation slots.

This is normal and will not damage your power tool.


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

18



C-45 o

C.


C-40 o

C.

Storage & Transport

Always empty and clean the dust collection box thoroughly upon completion of a sanding operation before placing the sander in storage.

When storing or transporting the sander ensure the battery is detached from the sander, and that the on/off switch (1) is in the OFF position. This prevents any accidental starting of the sander.

10. Warranty

Your new WORKZONE

®

TITANIUM 20V Li-Ion Cordless Detail Sander will more than satisfy your expectations.


®

TITANIUM


You will find your new 20V Li-Ion Cordless Detail Sander easy and safe to operate, and, with proper care, it will give you many years of dependable service.

CAUTION.

Carefully read through this entire instruction manual before using your new WORKZONE

®

TITANIUM 20V Li-Ion Cordless

Detail Sander.

Take special care to heed the Cautions and Warnings.

Your WORKZONE

®

TITANIUM 20V Li-Ion Cordless Detail Sander has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this 20V Li-Ion Cordless Detail Sander, making it easy to maintain and operate.

Use only WORKZONE

®

TITANIUM replacement parts for your product.

Non-conforming parts or modifications made to parts will void your warranty.


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

19




Service Support




12. Accessories and after sales parts

The following are available for purchase by visiting https://help.tools/ or calling our customer service hotline on: 1300 889 028

CPS18WA.9 • 2323 • 05/2019

1. Various Sandpaper 2. 2323-CPS18WA.9-DB: Dust Bag


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

20

13. Frequently Asked Questions

WORK HINTS FOR YOUR SANDER

• If your sander becomes too hot, run it at no load (running just the motor, and not using it) for 2-3 minutes to cool the motor.

• Always ensure the work-piece is firmly held or clamped to prevent movement.

Any movement of the material may affect the quality of the sanding finish.

• Start your sander before sanding and turn off only after stopping sanding. For best results, sand wood in the direction of the grain.

• Do not start sanding without sandpaper fitted.

• Do not allow the sandpaper to wear away, it will damage the base-plate. The product warranty does not cover base-plate wear and tear.

• Use coarse grit paper to sand rough surfaces, medium grit for smooth surfaces and fine grit for the final surfaces. If necessary, first make a test on scrap material.

• Use only good quality sandpaper.

• The sanding efficiency is controlled by the sandpaper not the amount of force you apply to the tool. Excessive force will reduce the sanding efficiency and cause motor overload.

• Replacing the sanding paper regularly will maintain optimum sanding efficiency.

• Do NOT sand asbestos material in ANY form.

• Always wear a dust mask, hearing protection and safety eye protection during sanding procedures.

• Sand hard-to-reach places using the SDS finger pad (7).

• Check and empty the dust bag (4) at regular intervals.


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

CPS18WA.9 • 2323 • 05/2019

14. Troubleshooting

Fault


Cause


Remedy

This is normal.

Undiagnosable Fault. The tool needs to be repaired.

Contact Customer

Service

Low efficiency in sanding

Too much dust in the dust bag.

Clean and empty the dust bag.

Battery depleted.

The sander does not start up after turning on.

Defective on/off switch.

Defective motor.

Charge the battery.

Contact Customer

Service.

Contact Customer

Service.

The sander stops during use.

Workpiece sanding is not smooth. Sanding marks are appearing .

Low battery.

Rough sanding paper. The density of grit is too low.

Charge the battery.

Change to a proper sanding paper with a higher grit.

Replace it with new sanding paper.

Worn sanding paper.

Low sanding efficiency.

The density of grit of the sanding paper is too high.

Change to a sanding paper with lower grit.


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

21

22

15. Technical specifications

Voltage

No load speed

Base size

Orbital diameter

Tool weight


20V d.c.

13000/min

140*140*80mm

1.5mm

1.23kg

260 x125 x120mm

This 20V Li-ion Cordless Detail Sander complies with the following Standards:

Safety: IEC 62841-1

IEC 62841-2-4

AS/NZS 62841.1

AS/NZS 62841.2.4

EMC: EN 55014-1

EN 55014-2


1300 889 028 (toll free)


MODEL No.:

CPS18WA.9 • 2323 • 05/2019

Xfinity Li-ION 20V

Cordless LED Torch

Instruction Manual

IMPORTANT



06

MODEL NUMBER


2

Welcome


Cordless LED torch.




1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

20V Li-Ion Cordless LED torch





3

CLP18WA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

4

Contents

Application 5





Important information-Product care

5

6

10

Assembly 10

7

8

Operation 11

Maintenance 14

Warranty 15





1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

CLP18WA.9 • 2323 • 05/2019

20V Li-Ion Cordless LED Torch

1. Application

First time users or inexperienced operators pay particular attention to the operation of the 20V Li-Ion Cordless LED Torch, including details of starting and stopping and correct use of the 20V Li-Ion Cordless LED Torch on pages


Intended use of 20V Li-Ion LED torch

NOTE:


This 20V Li-Ion Cordless LED Torch is used for lighting.


1 x 20V Li-Ion Cordless LED Torch Skin

1 x Belt clip + assembly screw

(not fitted)

1 x Hanging hook (fitted)

1 x Instruction Manual

1 x Warranty Card




WARNING!

Please read and understand this instruction manual before use and keep it for your future reference. Your power tool should only be passed on together with this instruction manual.

WARNING!

To reduce risk of injury, only use the supplied battery or any 20V Li-Ion Xfinity Plus batteries. Other type of battery packs may burst causing personal injury and damage. The battery pack must be recharged only with the supplied 20V Li-Ion charger, or any ALDI 20V

Li-Ion Xfinity Plus charger.


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

5

6


1. LED light

2. Torch head

3. Pivot joint

4. ON/OFF Switch

5. Handle

1

6. Belt clip retainer


8. Battery Pack

9. Hanging hook

10. Belt clip

9

2

3

4

5

7

6

8

10


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

CLP18WA.9 • 2323 • 05/2019



Warning

To reduce the risk of injury, user must read instruction manual.

Class III

Do not stare at the operating light source

60

60 Months Warranty

Replace any cracked protective shield

Regulatory Compliance Mark. Appliance complies with requirements of electrical approval & EMC in Australia.

7


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

8


SAFETY POINTS FOR YOUR FLASHLIGHT/ WORKLIGHT

SAFETY RULES FOR CORDLESS PORTABLE HAND-HELD LIGHT

CHARGE BATTERY BEFORE FIRST USE

CAUTION:

Read, understand and follow all Safety Rules and

Operating Instructions in this Manual before using this product.

SAVE THESE INSTRUCTIONS!

READ ALL INSTRUCTIONS!

SAFETY INSTRUCTIONS

WARNING: Be sure to read and understand all instructions in this manual before using this portable hand-held light. Failure to follow all instructions may result in electric shock, fire and/or serious personal injury.

1. Know your cordless portable hand-held light. Read operator’s manual carefully.

Learn its applications and limitations, as well as the specific potential hazards related to this light.

2. Use only recommended battery pack and charger.

Any attempt to use another battery pack will cause damage to the portable hand-held light and could possible explode, cause a fire, or personal injury.

Model

CLP18WA.9

Battery Pack

ABP1815MA

charger

JLH122200370S&Z10

3. Remove battery pack from portable hand-held light before replacing bulb or performing any routine maintenance or cleaning.

4. Do not disassemble the portable hand-held light.

5. Do not place portable hand-held light or battery pack near fire or heat. They may explode. Also, do not dispose of a worn out battery pack by incineration, even if it is severely damaged or


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

completely worn out. The battery may explode in fire.

6. Do not operate portable hand-held light or charging stand/transformer near flammable liquids or in gaseous or explosive atmospheres.

Internal sparks may ignite fumes.

7. To reduce the risk of electric shock, do not put portable hand-held light in water or other liquid.

Do not place or store portable hand-held light where it can fall or be pulled into a tub or sink.

8. Do not permit children to use portable hand-held light unsupervised. It is not a toy.

The temperature of the bulb will become hot after being on only a short period of time. This hot temperature can cause burn injury if touched.

9. DO NOT USE OR PERMIT USE OF PORTABLE HAND-HELD

LIGHT IN BED OR SLEEPING BAGS. This portable hand-held light lens can melt fabric and a burn injury could result.

10. Keep light dry, clean, and free from oil and grease.

Always use a clean cloth when cleaning. Never use brake fluid, gasoline, petroleum-base products or any strong solvent to clean the portable hand-held light.

11. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

9

CLP18WA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

10


This LED torch uses Lithium Ion Battery Cells. Care MUST be taken to ensure both the safety and life of the pack is maintained. Ensure you have read all of the safety notes in the previous pages before using the LED Torch.

Treat the battery pack with care and within the guidelines of this manual


7. Assembly

NOTE:

Before using the tool, read the instruction book carefully.

There is no assembly required for use of this LED Torch.

7.1 Charging your Battery pack (8)

WARNING:

The charger and battery pack (8) are specially designed to work together so do not attempt to use any other devices.

Never insert or allow metallic objects into your charger or battery pack

(8) connections because an electrical failure and hazard will occur.

Note:

a) Do not use any charger other than that specifically provided for use with the equipment, or any 20V Li-Ion ALDI Xfinity Plus Batteries.

b) If the battery pack (8) is very hot, remove the battery pack (8) from the charger and allow time for the battery to cool down before recharging. c) The battery pack (8) in your new tool is not charged when it leaves the manufacturer. Therefore it must be fully charged before using for the first time.

d) Charge the battery pack (8) to reach full or no less than half charge before storage. If the tool will not be used for long


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

periods of time, charge the battery every 3-6 months.

7.2 To remove the battery pack (See Fig. A1)

Depress the battery pack release button (7) firmly, then slide the battery pack (8) out away from the LED torch.

7.3 To install the battery pack (See Fig. A2)

Slide the fully charged battery pack (8) onto the LED torch with sufficient force until it clicks into position.

A1 A2

11

CLP18WA.9 • 2323 • 05/2019

8.Operation

8.1 ON/OFF Switch(4)

Press the on/off switch (4) to turn on the LED Torch. (See Fig. B)

Press the on/off switch (4) again to turn OFF the LED Torch. (See Fig.

B)

B

ON/OFF

Switch


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

12

8.2 Adjusting the Torch Head (2) position.

Adjust the torch head (2) position by rotating the pivoting head from the pivot joint (3). (See Fig. C) The torch pivoting head rotates to provide light in the range of -10° to 100°.

C

8.3 Carrying and Suspending the torch

CAUTION: When the LED Torch hangs by the belt clip (10) or the hanging hook (9). Do not shake the LED Torch or the object from which it hangs. Do not hang the torch from any electrical wires or anything that is not secure. Personal injury or property damage may occur.

CAUTION: Only use the belt clip (10) or the hanging hook (9) for hanging the LED Torch. The belt clip (10) and hanging hook (9) are not intended to support additional weight. Do not attach or hang anything additional to the torch or risk breakage may occur.

CAUTION: Do not use the belt clip (10) or hanging hook (9) to reach with or to support your weight in any situation.

8.4 Hanging hook (9)

The torch may be carried or hung by the hanging hook (9) (See Fig.

D1). When not in use, the hanging hook (9) may be folded down

(See Fig. D2).


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

D1

9

D2

9

8.5 Belt clip (10) (See Fig. E)

WARNING! To reduce the risk of serious personal injury, ensure the screw holding the belt clip (10) is secure.

The side belt clip (10) is used to assist to clip the torch to your waist belt while working. To install, insert the assembly screw through the belt clip screw hole into the retaining hole on the torch, and using a philips head screwdriver (not supplied), tighten the screw by turning in a clockwise direction

NOTE:

The belt clip (10) can be assembled onto either side of the

LED torch.

IMPORTANT:


E

13

CLP18WA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

14

9.Maintenance

Warning! Always ensure that the LED Torch is switched off and the battery pack is removed before making any adjustment.

Cleaning

Your LED torch requires no additional lubrication or maintenance.

There are no user serviceable parts in your LED torch. Never use water or chemical cleaners to clean your LED torch. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep all working controls free of dust.


When not in use, the LED Torch should be stored in a dry, frost free location not within the reach of children.

When storing or transporting the LED Torch ensure the battery is detached from the torch. This prevents any accidental starting of the LED Torch.

For Battery tools

The ambient temperature range for the use and storage of tool and battery is 0°C-45°C.

The recommended ambient temperature range for the charging system during charging is 0°C-40°C.


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

15

10.Warranty

Your new WORKZONE

®

TITANIUM 20V Li-Ion LED Torch will more than satisfy your expectations.


®


TITANIUM

You will find your new 20V Li-Ion LED Torch easy and safe to operate, and, with proper care, it will give you many years of dependable service.

CAUTION.

Carefully read through this entire instruction manual before using your new WORKZONE

®

TITANIUM 20V Li-Ion LED Torch.

Take special care to heed the Cautions and Warnings.

Your WORKZONE

®

TITANIUM 20V Li-Ion LED Torch has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this 20V Li-Ion Cordless LED Torch, making it easy to maintain and operate.

Use only WORKZONE

®


CLP18WA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

16





Service Support



Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an

environmentally safe way.


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019


Fault

The Battery pack gets warm when charging

Undiagnosable fault

Cause Remedy

It’s a result of the stepping down of the chemical reactions inside the batteries during the charging process

This is normal

The tool needs to be repaired

Contact Customer

Service

17

CLP18WA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

18

13. Technical Specification

Rated Voltage

Rated Power

Lumen

Running time

Machine weight


20V d.c.

3 W

250LM

8 h

0.71 kg

150*75*240 mm

This 20V Li-ion Cordless LED torch complies with the following Standards:

Safety: EN 60598-1

EN 60598-2-4

EN 62493

AS/NZS 60598.1

AS/NZS 60598.2.4

EMC: EN 55015

EN 61547

EN 61000-3-2

EN 61000-3-3


1300 889 028 (toll free)


MODEL No.:

CLP18WA.9 • 2323 • 05/2019

Xfinity Li-ION 20V

Bluetooth Speaker

Instruction Manual

IMPORTANT



07


2

Welcome


Bluetooth Speaker.




1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

20V Li-Ion Bluetooth Speaker





3

TRD18SA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

4

Contents

Application 5






Assembly 10

Operation 11

Maintenance 13

5

6

7

8

Warranty 14





1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

TRD18SA.9 • 2323 • 05/2019

5

20V Li-Ion Bluetooth Speaker

1. Application

First time users or inexperienced operators pay particular attention to the operation of the 20V Li-Ion Bluetooth Speaker, including details of starting and stopping and correct use of the 20V Li-Ion Bluetooth Speaker on pages


Intended use of 20V Li-Ion Bluetooth Speaker

NOTE:


The 20V Li-Ion Bluetooth Speaker is intended for playing music or amplifying the sound by connecting other Bluetooth-enabled electronic devices.


1 x 20V Li-Ion Bluetooth Speaker






WARNING!


WARNING!

To reduce risk of injury, only use the supplied 20V Li-Ion battery or charger or any ALDI Xfinity Plus range of 20V Li-Ion battery packs. Other type of battery packs may burst causing personal injury and damage. The battery pack must be charged using with ALDI

Xfinity Plus 20V Li-Ion battery chargers.


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

6


1. Bluetooth speaker

2. Battery pack


4. On/Off, Pause/Play Switch

5. Volume adjustment buttons

6. Power indicator light

Volume adjustment buttons: (the left volume button is to decrease volume and is also used to revert to the previous song; the right volume button is to increase volume and is also used to play the next song)

5

6

4

1

3

2


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019




Warning

CAUTION: To prevent electric shock hazard, do not connect to mains power supply while grille is removed.

Electric shock


7

TRD18SA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

8


SAFETY WARNING

SAVE THESE INSTRUCTIONS!

READ ALL INSTRUCTIONS!

Safety instructions

WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS.

Failure to follow all instructions listed below may result in electric shock, fire and / or serious personal injury.

1) Do not use this apparatus near water.

2) Clean only with dry cloth.

3) Ventilation should not be impeded by covering any open vents on the product.

4) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

5) Only use attachments/accessories specified by the manufacturer.

6) Remove the battery during lightning storms or when unused for long periods of time.

7) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

8) The apparatus shall not be exposed to dripping or, splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

9) The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION:

Danger of explosion if a non specified battery is used on this product. Use only the supplied 20V Li-Ion battery or any ALDI

Xfinity Plus 20V Li-Ion batteries.


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019


NOTE:

For any issues related directly to your 20V Li-Ion Bluetooth

Speaker, contact the Customer Service of the manufacturer as listed on the 20V Li-Ion Bluetooth Speaker packaging, manual or on the label on the 20V Li-Ion Bluetooth Speaker.

This 20V Li-Ion Bluetooth Speaker uses Lithium Ion Battery Cells.

Care must be taken to ensure both the safety and life of the pack is maintained. Ensure you have read all of the safety notes in the previous pages before using the 20V Li-Ion Bluetooth Speaker.



Use only the supplied 20V Li-Ion battery and charger or any ALDI

Xfinity Plus 20V range of batteries and chargers.

9

TRD18SA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

10

7. Assembly

NOTE:

Before using the bluetooth speaker, read the instruction book carefully.

7.1 To Remove the Battery Pack (See Fig. A1)

Depress the battery pack release button (3) firmly, then slide the battery pack (2) out away from the bluetooth speaker.

7.2 To Install the Battery Pack (See Fig. A2)

Slide the fully charged battery pack (2) onto the bluetooth speaker with sufficient force until it clicks into position.

A1 A2

2

1


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

TRD18SA.9 • 2323 • 05/2019

B

8. Operation

8.1. ON/OFF SWITCH (SEE FIG. B)

1. Install the battery pack (2).

2. Press the On/Off switch (4) for approx. 3 seconds to turn on power for the bluetooth speaker (1). You will hear a sound, and the power indicator light (6) will illuminate flashing blue. The light will flash quickly in 0.5 second intervals.

3. Press the On/Off switch (4) for approx. 3 seconds to turn off power for the bluetooth speaker (1). You will hear a sound, and the power indicator light (6) will turn off.

4. When the battery is low on charge or nearly empty, the power indicator light (6) will flash quickly.

11

8.2 Connecting Electronic Device

1. Turn on power to the Bluetooth function of your electronic device.

2. Find “Bluetooth Speaker” shown on your device and link to it.

When you link to the bluetooth speaker (1) it will make a sound, and the light will start flashing slower.

3. Once the bluetooth speaker (1) is connected to your device and playing music, the power indicator light (6) will remain constant and will not be flashing.


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

12

8.3 Adjusting the Volume (SEE FIG. C1, C2)

1. Press the right button (5) to increase the volume. When the bluetooth speaker (1) has reached its maximum volume, you will hear a beep, and the power indicator light (6) will flash once.

2. Press the left button (5) to lower the volume. When the bluetooth speaker (1) is at the lowest volume, you will hear a beep, and the power indicator light (6) will flash slowly.

C1 C2

8.4 Selecting the Functions

1. Quick pressing of the On/Off switch (4) will pause the music being played on the bluetooth speaker (1). By quickly pressing the On/Off switch (4) again, the music will resume.

2. By pressing the right volume button (5) for approx. 3 seconds, you will proceed to the next song.

3. By pressing the left volume button (5) for approx. 3 seconds will return to the previous song.


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

9. Maintenance

Warning! Always ensure that the 20V Li-Ion Bluetooth speaker is switched off and the battery pack is removed before making any adjustment.

Your Bluetooth speaker requires no additional lubrication or maintenance.

There are no user serviceable parts in your Bluetooth speaker. Never use water or chemical cleaners to clean your Bluetooth speaker.

Wipe clean with a dry cloth. Always store in a cool, dry place.


When not in use, the Bluetooth speaker should be stored in a dry, frost free location not within the reach of children.

When storing or transporting the Bluetooth speaker ensure the battery is detached from the speaker. This prevents any accidental starting of the Bluetooth speaker.

For Battery tools

The ambient temperature range for the use and storage of tool and battery is 0°C-45°C.

The recommended ambient temperature range for the charging system during charging is 0°C-40°C.

13

TRD18SA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

14

10. Warranty

Your new WORKZONE

®

TITANIUM 20V Li-Ion Bluetooth Speaker will more than satisfy your expectations.


®


TITANIUM

You will find your new 20V Li-Ion Bluetooth Speaker easy and safe to operate, and, with proper care, it will give you many years of dependable service.


®

TITANIUM 20V Li-Ion Bluetooth

Speaker. Take special care to heed the Cautions and Warnings.

Your WORKZONE

®

TITANIUM 20V Li-Ion Bluetooth Speaker has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this 20V Li-Ion Bluetooth Speaker, making it easy to maintain and operate.

Use only WORKZONE

®



1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

15



In the event of product failure within its intended use over the course of as quickly as possible once it has been brought to our attention.

In the unlikely event of such an occurrence, or if you require any information about the product please contact us via our after sales support services, details of which can be found in this manual and on the product itself. After Sales Support TEL: 1300 889 028

Service Support




TRD18SA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

16


Fault


Undiagnosable

Fault.

Cause Remedy


This is normal.

The tool needs to be repaired.

Contact Customer

Service.

The speaker has already been linked to another device.

Check and disconnect the

Bluetooth connectivity of the other device.

Mobile device cannot be linked to the speaker by

Bluetooth.

The device is placed too far away from the speaker.

Defective Bluetooth function.

Strong electromagnetic interference in the environment

Place nearer to the speaker.

Contact Customer

Service.

Check what the source of interference is. It may be charger or computer or any high-powered household electrical appliances. Place the speaker far away from the source.

Low battery.

The speaker switch off automatically.

Defective battery.

Charge the battery.

Contact Customer

Service, or the battery manufacturer.

For further inquiries or issues associated with your tool, call our Customer

Service on 1300 889 028 or email us at [email protected]


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019


Voltage

Bluetooth version

Machine weight


20V d.c.

4.2

0.24 Kg

125x75x95 mm

This 20V Li-Ion Bluetooth Speaker complies with the following Standards:

Safety: IEC 60065

AS/NZS 60065

EMC:

EMF:

RED:

EN55032

EN55035

EN 61000-3-2

EN 61000-3-3

EN 50663

EN 62479

EN 300 328

EN 301 489-1

EN 301 489-17

17

TRD18SA.9 • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

TRD18SA.9 • 2323 • 05/2019

Xfinity Li-ION 20V

USB CHARGER

Instruction Manual

IMPORTANT



08


2

Welcome


USB Charger




1300 889 028 (toll free)


MODEL No.:

ACG118PA • 2323 • 05/2019

Contents

Application






Operation 8

Maintenance 9

7

8

5

6

4

4

Warranty 9



Technical Specifications

10

11

3

ACG118PA • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

ACG118PA • 2323 • 05/2019

4

20V Li-Ion USB Charger

1. Application

First time users or inexperienced operators pay particular attention to the operation of the 20V Li-Ion USB Charger, including details of starting and stopping and correct use of the 20V Li-Ion USB Charger on page 8, as well as the maintenance instructions on page 9.

Intended use of 20V Li-Ion USB Charger

NOTE:


This 20V Li-Ion USB Charger is

used for charging or supplying power to mobile phones (Android and iPhone) or any USB device that meets the technical parameter of 5V Output.


1 x 20V Li-Ion USB Charger






WARNING!

Please read and understand this instruction manual before use and keep it for your future reference. Your 20V Li-Ion USB Charger should only be passed on together with this instruction manual.

WARNING!

To reduce risk of injury, only use the supplied battery and charger in this kit or any ALDI Xfinity Plus range of 20V battery packs. Other type of battery packs may burst causing personal injury and damage. The battery pack must be charged using ALDI Xfinity

Plus 20V battery chargers.


1300 889 028 (toll free)


MODEL No.:

ACG118PA • 2323 • 05/2019


1. Charging turn on button

2. Charger base

3. USB charging ports

4. Battery pack

5. Battery power indicator


5 1

2

3

4

6

ACG118PA • 2323 • 05/2019


1300 889 028 (toll free)


MODEL No.:

ACG118PA • 2323 • 05/2019

5

6



60

T 2A

Warning

For indoor use only

Read the operator’s manual.


60 Months Warranty

Fuse


1300 889 028 (toll free)


MODEL No.:

ACG118PA • 2323 • 05/2019

ACG118PA • 2323 • 05/2019



WARNING Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.


- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

Additional safety instructions for your charger

1. Before charging, read the instructions.

2. Do not use charger for works other than those for which they are designed.

3. The charging device must be protected from moisture.

4. Do not use the charging device in the open.

5. Do not open the unit and keep out of the reach of children.

6. Ensure that the connection between the charger and your equipment is correctly positioned.

7. Keep charger’s slots free of foreign objects and protect against dirt and humidity. Store in a dry and frost-free place.

8. When charging your equipment, ensure that the charger is in a well-ventilated area and away from inflammable materials. Ensure that your equipment and charger are not left unsupervised during charging.

9. Longer life and better performance can be obtained if your equipment is charged when the air temperature is between 15 o and 25 o

C. Do not charge your equipment in air temperatures

C


1300 889 028 (toll free)


MODEL No.:

ACG118PA • 2323 • 05/2019

7

8 below 0 o C, or above 40 charging is over.

o C.

10. Disconnect from your equipment when not charging or the


NOTE:

For any issuses related directly to your Battery, contact the

Customer Service of the manufacturer as listed on the battery packaging, manual or on the label on the battery.

This Charger uses Lithium Ion Battery Cells. Care MUST be taken to ensure both the safety and life of the pack is maintained. Ensure you have read all of the safety notes in the previous pages before using the Charger.



7. Operation

7.1. To install or remove the battery pack

To install the battery pack

Slide the fully charged battery pack (4) onto the USB Charger with sufficient force until it clicks into position.

To remove the battery pack

Depress the battery pack release button (6) firmly, then slide the battery pack (4) out away from the USB charger.

NOTE:

Remove the USB charger from the battery pack (4) when not in use.

7.2. USB Charging Ports (6)

The USB charger is equipped with 2 USB charging ports (3) and delivers 2.0 A total current per USB port.


1300 889 028 (toll free)


MODEL No.:

ACG118PA • 2323 • 05/2019

ACG118PA • 2323 • 05/2019

NOTE:

To achieve longer USB charger life, don’t plug in mobile phones or other devices that exceed charging current on the battery charger’s label. To charge, insert the USB plug into one of the charging ports (3).

7.3. Charging Turn On Button (1)

Your charger is equipped with a charging turn on button (1).

First install the USB charger onto a battery pack, then connect your

USB charging cable end into one of the charging ports (3). Press the charging turn on button (1) to start charging. The battery power indicator (5) will illuminate for three seconds to show the battery power. During charging, press the charging turn on button (1) to check the battery power remaining.

8. Maintenance

There are no serviceable parts inside your battery charger.

Any adjustment, servicing or maintenance should be performed by an authorized repair agent, so do not attempt to repair your battery charger.

The USB Charger requires no additional lubrication or maintenance.

Never use water or chemical cleaners to clean your USB Charger.

Wipe clean with a dry cloth. Always store your USB Charger in a dry place.

9. Warranty

Your new WORKZONE

®

TITANIUM 20V Li-Ion USB Charger will more than satisfy your expectations.


®


TITANIUM

You will find your new 20V Li-Ion USB Charger easy and safe to operate, and, with proper care, it will give you many years of dependable service.

CAUTION. Carefully read through this entire instruction manual


1300 889 028 (toll free)


MODEL No.:

ACG118PA • 2323 • 05/2019

9

10 before using your new WORKZONE ® TITANIUM 20V Li-Ion USB

Charger. Take special care to heed the Cautions and Warnings.

Your WORKZONE ® TITANIUM 20V Li-Ion USB Charger has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this 20V Li-Ion USB Charger, making it easy to maintain and operate.

Use only WORKZONE

®








Service Support



1300 889 028 (toll free)


MODEL No.:

ACG118PA • 2323 • 05/2019

ACG118PA • 2323 • 05/2019


Fault


Cause


Remedy

This is normal.

The fault cannot be rectified.

The tool needs to be repaired.

Contact Customer

Service.

USB port is not charging

Battery has no charge

Recharge the battery

The USB plug being used exceeds the output requirement of the USB charger.

Do not use this plug on this device

For further inquiries or issues associated with your tool, call our Customer

Service on 1300 889 028 or email us at [email protected]


Input

Output

USB charging port

Tool Weight


20V d.c. 1.5Ah

5VDC 2A(in total)

2

0.08 kg

125 x 75 x 65mm

This 20V Li-Ion USB charger complies with the following Standards:

Safety:

IEC62368-1

AS/NZS 62368.1

EMC:

EN55035

EN55032


1300 889 028 (toll free)


MODEL No.:

ACG118PA • 2323 • 05/2019

11

ALDI guarantees that our exclusive brand products are developed to our stringent quality specifications. If you are not entirely satisfied with this product, please return it to your nearest ALDI store within 60 days from the date of purchase for a full refund or replacement, or take advantage of our after sales support by calling the supplier‘s Customer Service Hotline.

WORKZONE

®

TITANIUM is a registered trademark of ALDI Stores

AUS

Made in China

WORKZONE

®

TITANIUM is a registered trademark of ALDI Stores

DISTRIBUTED BY:

ALDI STORES

1 SARGENTS ROAD, MINCHINBURY NSW 2770 www.aldi.com.au

1300 889 028

CKT718A

[email protected]

2323

05/2019

ALDI ABP1815MA, CDT218XA.9, CKT718A, CLP18WA.9, CPS18WA.9, CSC165XA.9, JLH122200370S, TRD18SA.9, Workzone Titanium Xfinity Series, Z10 Instruction Manual 168 Pages

ALDI ABP1815MA, CDT218XA.9, CKT718A, CLP18WA.9, CPS18WA.9, CSC165XA.9, JLH122200370S, TRD18SA.9, Workzone Titanium Xfinity Series, Z10 Instruction Manual

7PC CORDLESS KIT

Battery And Battery Charger

°

°

Cordless drill / driver

Impact Driver

165mm Circular Saw

Cordless Sander

Cordless LED Torch

Bluetooth Speaker

USB CHARGER

Related manuals

ALDI ABP1815MA, CDT218XA.9, CKT718A, CLP18WA.9, CPS18WA.9, CSC165XA.9, JLH122200370S, TRD18SA.9, Workzone Titanium Xfinity Series, Z10 Instruction Manual 168 Pages

ALDI ABP1815MA, CDT218XA.9, CKT718A, CLP18WA.9, CPS18WA.9, CSC165XA.9, JLH122200370S, TRD18SA.9, Workzone Titanium Xfinity Series, Z10 Instruction Manual

7PC CORDLESS KIT

Battery And Battery Charger

°

°

Cordless drill / driver

Impact Driver

165mm Circular Saw

Cordless Sander

Cordless LED Torch

Bluetooth Speaker

USB CHARGER

Related manuals

Triton

TMUTL

Genesis

GLCD20CSE

Genesis

GLSD08B

Inner Decor

DMKACH72B2BN2

Rockwell

RS2112

Genesis

GLCS2055A

Ozito

OPSDK-30

Lutool

LT3IN1 Cordless Drill

Genesis

GLID20A

FXA

Xclick FXAJD5125

Parkside

PDSSA 18 A1