Electrolux EW27WD55GS2, EW30WD55GS1, EW27WD55GS1 Owner's manual

Electrolux EW27WD55GS2, EW30WD55GS1, EW27WD55GS1 Owner's manual

d_

Use

Warm

Guide

Drawer

Finding information

MAKEA RECORDFORFUTUREUSE

[] [] [] [] [] [] [] [] [] [] [] [] [] [] []

[] []

Brand

Purchase Date

Model Number

Serial Number

[] [] [] []

[] [] [] [] [] [] [] [] [] [] [] [] [] [] []

For toll-free telephone support in the U.S. and Canada:

1 =877=4ELECTROLUX (1 =877=435-3287)

[] [] [] [] [] []

For online support and internet product information: www.electrolu×appliances.com

TABLEOFCONTENTS

[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

ImportantSafetyInstructions...........................4

Solutions to Common Problems .....................12

CannotMoveApplianceEasily.......................12

WarmerDrawerDoes Not Operate................12

BeforeSettingWarmerDrawerControl............7

SettingWarmerDrawerControl .......................7

SettingHumidityController ..............................9

SettingBread ProofControl .............................9

GeneralCare& Cleaning..................................10

ToRemoveand ReplaceWarmerDrawer...... 10

@2008 Electrolux Home Products, Inc.

Post Office Box 212378, Augusta, Georgia 30917, USA

All rights reserved.

Printed in the USA

Safety

[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

Please read all safety instructions before using your new Electrolux Warm & Serve Drawer.

.

Remove all tape and packaging wrap before using the appliance.

Destroy the

carton and plastic bags after unpacking the appliance.

Never allow children to play with packaging material.

Proper Installation.

Be sure your appliance is properly installed and grounded by

a qualified technician in accordance with the National Electrical Code ANSI/NFPA

No. 70 -latest edition in the United States, or CSA C22.1, Part 1 in Canada, and local code requirements. Install only per installation instructions provided in the literature package for this appliance.

Ask your dealer to recommend a qualified technician and an authorized repair service.

Know how to disconnect the electrical power to the drawer at the circuit breaker or fuse box in case of an emergency.

.

User Servicing.

Do not repair or replace any part of the appliance unless specifically recommended in the manuals.

All other servicing should be done only by a qualified technician to reduce the risk of personal injury and damage to the appliance.

*

Never modify or alter the construction of the drawer by removing panels, wire covers, locking plates, or any other part of the product.

Safety

Storage

in or on Appliance--Flammable

materials should not be stored in the drawer. This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the warmer drawer. Flammable materials may explode and result in fire or property damage.

Do not leave children alone. Children should not be left alone or unattended

in

the area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

DO NOT TOUCH iNTERiOR SURFACES OF THE WARMER DRAWER. Surfaces may be hot even though they are dark in color. During and after use, do not touch, or let clothing or other flammable materials touch these areas until they have had sufficient time to cool.

Wear Proper Apparel--Loose-fitting or hanging garments should never be worn while using the appliance.

Do not let clothing or other flammable materials contact hot surfaces.

Use Only Dry Potholders--Moist or damp potholders on hot surfaces may result

in burns from steam. Do not let the potholders touch hot heating elements. Do not use a towel or other bulky cloth instead of a potholder.

Do Not Heat Unopened Food Containers--Build-up container to burst and result in injury. of pressure may cause the

IMPORTANT--Do

not attempt to operate the warmer drawer during a power failure.

If the power fails, always turn the control off. If the drawer is not turned off and the power resumes, the drawer may begin to operate again. Food left unattended could spoil.

Protective

Liners--Do

not use aluminum foil to line warmer drawer. Any other use of protective liners or aluminum foil may result in poor performance or damage to the appliance. Only use aluminum foil as recommended for baking if used as a cover placed on the food.

Glazed Cooking Utensils--Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for use without breaking due to the sudden change in temperature.

Check the manufacturer's recommendations.

Use Care When Opening Warmer Drawer--Stand to the side of the unit when opening the door of a hot drawer. Let hot air or steam escape before you remove or replace food in the warmer drawer.

Safety

Placement of Warmer Drawer Racks--Always place rack in desired location while drawer is cool. If rack must be moved while hot, use extreme caution. Use potholders and grasp the rack with both hands to reposition. Do not let potholders contact the hot

element or interior of the warmer drawer. Remove all utensils from the rack before removing rack.

Do Not Use Water on Grease Fires--Smother or foam-type extinguisher.

the fire or flame or use dry chemical

IMPORTANT INSTRUCTIONS FOR CLEANING YOUR WARM & SERVE

DRAWER

, Clean the drawer regularly to keep all parts free of grease that could catch fire. Do not allow grease to accumulate.

Greasy deposits could catch fire.

, Kitchen cleanerslaerosols--Always follow the manufacturer's recommended directions for use. Be aware that excess residue from cleaners and aerosols may ignite causing damage and/or injury.

Setting Control

BEFORESEEING WARMERB WER CONTROL

[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

Arranging

Warmer Drawer Rack

Positions

Set the warmer drawer rack in the vertical position as shown below.

Upright Position

Downward Position

The rack can be used in 2 ways:

In the upright position to allow low profile food items to be placed both under and on top of the rack

(for example, rolls or biscuits on top of the rack and a casserole dish under).

• In the downward position to allow you to place light weight food items and empty dishware (for example, rolls or pastries and dinner plates).

SETTINGWARMERB WER CONTROL

[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

Use the warmerdrawer to keep hotfoods hot such as: vegetables,gravies,meats,casseroles, biscuitsand rolls, pastriesand heateddinner plates.

The warmerdraweris equippedwith a catchwhich may requireextra force whenopeningand closing the drawer.

To Operate the Warmer Drawer

The purpose of the warmer drawer is to keep hot cooked foods at serving temperature.

Always start with hot food. It is not recommended to heat cold food in the warmer drawer.

All food placed in the warmer drawer should be covered with a lid or aluminum foil to maintain moisture and softness. Do not cover crisp foods. Do not use plastic wrap to

cover food. Plastic may melt onto the drawer and be very difficult to clean.

Use only dishware, utensils and cookware recommended for oven use in the warmer drawer.

Control

SETT)NGWARMERD WER CONTROLS

[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

To Set the Controls

The digital controls are used to set the temperature of the warmer drawer. It is located at the right side of the warmer drawer in the open position.

To Power-Up the Controls

On the first power-up or after a power interruption, the unit will flash "88:88 °" in the display.

Press the ON-OFF pad twice. The display will show "----" prompting to press another pad. If no other pad is touched, the unit will power off after a few seconds.

To Set the Target Temperature

To select the lowest (90°F) warming temperature available, press the -Io pad and wait for the a few seconds for the acceptance delay. A second press of -Io will lower the temperature to Bread Proof, displayed by a "brPF" in the screen.

The Bread Proof function can also be accessed at any time by pressing the pad. To select the highest (210°F) warming temperature available, press the +hi pad and wait for the few seconds acceptance delay.

For any temperature between the lowest (90°F) and the highest

(210°F), press the +hi or -Io pads until the desired temperature is displayed. The pads will adjust the target temperature by 10°F steps each time it is pressed. When the desired temperature is set, wait a few seconds for the controls to accept the input. The display will show the temperature rising to the target temperature and will sound a chime when it is reached. It is recommended to let the unit pre-heat for 10-15 minutes before placing meal in it.

Warmer Drawer Recommended

Food Settings Chart

Food Item Setting

To Warm Serving Bowls and Plates

Heat bowls and plates on the 140°F setting. Place empty dishes on the rack to raise them off drawer bottom. To further heat dishes or to heat fine china, check with the manufacturer for maximum heat tolerance.

Indicator

Light

The indicator light is located in the lower center part of the front drawer glass. (t turns on when the control is set, and stays on until the unit is turned off. Make sure indicator light is off when removing food from the drawer.

Auto=Shutdown

This unit is programmed to automatically shutdown after 4 hours it is left on. The element will stop warming the drawer, the indicator light will turn off and the electronic display will show an "OFF" message, to remind the user that the unit auto-shutted off by itself.

Bacon

Biscuits

Casseroles

Eggs

Empty Dinner Plates

Fish, Seafood

Fried Foods

Gravies, creams, sauces

Ham

Hamburger Patties

Pancakes, Waffles

Pastries

Pies

Pizza

190°F

190°F

170°F

170°F

190°F

Pork Chops

Potatoes (baked)

Potatoes (mashed)

Poultry

190°F

190°F

170°F

190°F

Roasts (Beef, Pork, Lamb) 170°F

Rolls, soft 140°F

Rolls, hard

Vegetables

170°F

170°F

190°F

170°F

170°F

170°F

140°F

170°F

190°F

170°F

170°F

Setting Control

Figure 1

SETTINGNUMIDI CONTROLLER

[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

To Set the Humidity

Controller

The humidity controller is located on the inside of the warmer drawer and used to control humidity in the warmer drawer. The humidity control knob can be set at any position between Moist _ (Figure 1) and Crispy 6 (Figure

2) position. To set the humidity controller, slide the humidity control knob to the desired location.

Figure 2

SETTINGBREADPROOFCONTROL

[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

To Enable the Bread

Proof Feature

At anytime when the unit is ON, press the _ pad on the warmer drawer digital controls.

The display will show "brPF", indicating that the warmer drawer is in Bread Proof mode.

Wait a few seconds for the controls to accept the input.

Figure 3

Preparing Bread Dough for the Warmer Drawer

The Warmer Drawer has a Bread Proof feature that can be used to help prepare bread dough. The recommended length of time to keep bread dough in the Warmer Drawer is about 45-60 minutes. Be sure however to follow the recipe's recommended times.

The unrisen bread dough should be placed in a large bowl since the dough will nearly double in volume.

Place the Warmer Drawer Rack in the downward position (see Figure 3). Before placing in the Warmer Drawer, cover the bowl with a moist cloth or use wax paper that has been coated with a non-stick type cooking spray.

NOTE : The bread proof function uses low warming temperature which could happen to be lower than your room temperature, The drawer will not work as a cooling device and will not be able to lower the temperature under the ambient temperature.

General Care & Cleani

TO REMOVE

AND

REP CE

WARMERD WER

[] [] [] [] II [] [] [] [] [] [] I II II [] [] [] [] [] [] [] []

To Remove Warmer Drawer:

1.

Turn power off before removing the warmer drawer.

2.

Open the drawer to the fully opened position.

3.

Locate glide lever on each side of drawer, pull up on the right glide lever and push clown on the left glide lever (See

Figure 1).

4.

Pull the drawer away from the range.

To Replace Warmer (Warm & Ready

TM)

Drawer:

1.

Pull the plastic slider to the front of the glide slots on each side of the drawer cavity (See Figure 2).

2.

Align the glide on each side of the drawer with the drawer cavity glide slot.

3.

Push the drawer into the drawer cavity until glide levers

"click" (approximately 2"). If you do not hear the glide levers "click" or the drawer does not feel seated remove the drawer and repeat steps 1 thru 3.

Left glide

Pull up lever with finger Figure 1

Right glide

Figure 2

General Care & Cleani

Surfaces

Plastic

Membrane Keypad

Stainless Steel

Door & Drawer Body

Porcelain Enamel

Body Parts and Cavity

Warmer Drawer Rack

CARE& CLEAN)NGTABLE

[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

Cleaning Various Parts or Your Appliance

Before cleaning any part of the drawer, be sure control is turned OFF and the drawer is

COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE.

REGU-

LAR CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LATER.

How to Clean

Clean with a cloth soaked in soapy water. Rinse with a clean water and a dishcloth.

Note: Humidity controller knob can not be removed.

Cleaners made especially for stainless steel are recommended.

Always follow the manufacturer's instructions.

Be sure to rinse the cleaners. DO

NOT clean the door gasket. The door gasket is essential for a good seal.

Care should be taken not to rub, damage or remove the gasket.

Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1 solution of clear water and ammonia. If necessary, cover difficult spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and then scrub with a soap-filled scouring pad. Rinse and wipe dry with a clean cloth. Remove all cleaners or the porcelain may become damaged during future heating. DO NOT use spray oven cleaners.

The rack may be removed for cleaning. Clean by using a mild, abrasive cleaner following manufacturer's instructions.

Rinse with clean water and dry.

utions to Common Problems

D_WER IS NOTLEVEL

[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

• Poor installation.

Place a level on the cutout bottom.

Make sure bottom is bevel.

• Be sure cutout bottom is strong and stable

enough

to adequately support drawer (and wall oven, if applicable).

CANNOTMOVEAPPLIANCEEASILY

[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

.

Appliance must be accessible for service.

Cabinets not square or are built in too tightly. Contact builder or installer to make appliance accessible.

[]

WARMERDRAWERDOESNOTOPE_TE

[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

Make sure cord/plug is plugged tightly into outlet.

Service wiring is not complete.

Contact your dealer, installing agent or authorized servicer.

Power outage.

Check house lights to be sure. Call your local electric company for service.

LjorApplianceWarrantyinformation

Your appliance is covered by a one year limited warranty.

For one year from your original date of purchase, Electrolux will repair or replace any parts of this appliance that prove to be defective in materials or workmanship used, and maintained in accordance with the provided instructions.

In addition, the glass when cooktop such appliance or radiant surface is installed, element of your appliance (excluding built-in and free-standing range appliances) is covered by a two through five year limited warranty.

During the 2nd through 5th years from your original date of purchase, Electrolux will provide a replacement radiant surface element for your appliance which has proven to be defective in materials or workmanship when glass cooktop such appliance or is installed, used, and maintained in accordance with the provided instructions.

Exclusions

This warranty does not cover the following:

1.

Products with original serial numbers that have been removed, altered or cannot be readily determined.

2.

Product that has been transferred from its original owner to another party or removed outside the USA or Canada.

3.

Rust on the interior or exterior of the unit.

4.

Products purchased "as-is" are not covered by this warranty.

5.

Food toss due to any refrigerator or freezer failures.

6.

Products used in a commercial setting.

7.

Service calts which do not involve malfunction or defects in materials or workmanship, or for appliances not in ordinary household use or used other than in accordance with the provided instructions.

8.

Service calls to correct the installation of your appliance or to instruct you how to use your appliance.

9.

Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a part of the appliance when it is shipped from the factory.

10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumaNes, or knobs, handles, or other cosmetic parts.

11. Labor or in-home service costs during the additionat limited warranty periods beyond the first year from your original date of purchase.

12. Pickup and delivery costs; your appliance is designed to be repaired in the home.

13. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service catts to remote areas, including the state of Alaska.

14. Damages to the finish of appliance or home incurred during transportation or installation, including but not limited to floors, cabinets, walls, etc.

15. Damages caused by: services performed byunauthorized service companies; use of parts other than genuine Electrolux parts or parts obtained from persons other than authorized service companies; or external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.

DISCLAIMER

CUSTOMER'S

OF IMPLIED

WARRANTIES;

SOLE AND EXCLUSIVE

LIMITATION

REMEDY

OF REMEDIES

UNDER THIS LIMITED WARRANTY SHALL BE REPAIR OR

REPLACEMENT AS PROVIDED HEREIN.

CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST

PERIOD ALLOWED

CONSEQUENTIAL

BY LAW,

OR INCIDENTAL

BUT NOT

DAMAGES

FROM ANY BREACH OF THIS WRITTEN

LESS

SUCH AS PROPERTY

LIMITED

THAN ONE

WARRANTY

YEAR.

OR

ELECTROLUX

DAMAGE

ANY

AND INCIDENTAL

IMPLIED

SHALL

WARRANTY.

NOT BE

EXPENSES

SOME

LIABLE

RESULTING

STATES

FOR

AND

PROVINCES

LIMITATIONS

APPLY

DO NOT ALLOW THE EXCLUSION

ON THE DURATION OF IMPLIED

OR LIMITATION

WARRANTIES,

TO YOU.

THIS WRITTEN WARRANTY

RIGHTS THAT VARY FROM STATE TO STATE.

OF INCIDENTAL

SO THESE LIMITATIONS

GIVES YOU SPECIFIC LEGAL

OR CONSEQUENTIAL

RIGHTS.

OR

YOU

EXCLUSIONS

MAY ALSO

DAMAGES,

HAVE

MAY

OR

NOT

OTHER

If You Need Service

Keep your receipt, delivery slip, or some other appropriate be required.

If service is performed, be obtained by contacting Electrolux it is in your best at the addresses interest payment to obtain or phone record numbers to establish and keep all receipts.

below.

the warranty

Service period should under this warranty service must

This warranty only applies in the USA, Puerto Rico and Canada.

In the USA and Puerto Rico, your appliance

Electrolux Major Appliances North America, a division of Electrolux Home Products, Inc.

In Canada, is warranted your appliance by is warranted

Obligations by Electrolux Canada

Product features or specifications

Corp.

Electrolux as described authorizes for service and parts under this warranty must or illustrated no person to change be performed are subject or add to any obligations by Electrolux to change or an authorized without notice.

under this warranty.

service company.

USA

1 =877=435=3287

Electrolux Major Appliances

P.O.

Box 212378

Augusta, GA 30907

North America

Canada

1=800=265=8352

Electrolux Canada Corp.

5855 Terry Fox Way

Mississauga, Ontario, Canada L5V 3E4

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement