Excel XR2600TY2 Power Washer Owner's Manual
Excel XR2600TY1 is a pressure washer that can be used for a variety of cleaning tasks around the home. It features a powerful 2,600 PSI pump that can remove dirt and grime from even the toughest surfaces. The XR2600TY1 also comes with a variety of nozzles that allow you to customize the spray pattern and pressure to suit the specific cleaning task. With its long hose and compact design, the XR2600TY1 is easy to maneuver and store, making it a great choice for both indoor and outdoor cleaning projects.
Advertisement
Advertisement
®
Record All Information and attach sales receipt here for future reference:
Purchase Date:
Serial #:
Do Not return this product to the retailer!
Questions? 1-800-888-2468
Learn more about your pressure washer, get answers to frequently asked questions, and register on line at
www, excellpressurewasher,
com
Pressure Washer
Operation D'dilanuam for model XR2600
Table of Contents
Safety Guidelines/Definitions
Maintenance .................................................12
Consumer Saftey Information ............................
Storage ............................................................
Important Safety Instructions .....................
Carton Contents ......................................
6
Trouble
Warranty
Shooting Guide ................... 14-I5
.............................................................................
Assembly Instructions ..................................6
Operating Instructions ....................................
Frangais ...................................................33-48
IMPORTANT
Please
make certain
that the person
who is to use this equipment carefully
reads and understands these instructions before
operatin#
Part No.
A12335
Rev. 0 05/18/05
thatis importantforyouto knowandunderstand,
Thisinformationrelatesto protecting
Tohelpyourecognize readthemanualandpayattentiontothesesymbols.
_ which,ifnotavoided,wi resultin
death
or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
_ which, if not avoided, could result in death or serious
injury.
_Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property€ damage.
_This product may not be equipped with a spark arresting
muffler.
If the product is not equipped and will be used around flammable materials, or on land covered with materials such as agricultural crops, forest, brush, grass, or other similar items, then an approved spark arrester must be installed
and
is legally required in the state of California.
It is a violation of California statutes section 130050 and/or sections 4442 and 4443 of the California Public Resources
Code, unless the engine is equipped with a spark arrester, as defined in section 4442, and maintained in effective working order; Spark arresters are also required on some
U.S. Forest Service land and may also be legally required under other statutes and ordinances.
__j_ Engine exhaust contains chemicals known, in certain quantities, to
cause cancer, birth defects or other reproductive
harm
Do not operate this unit until you have read and understand this
Operators Manual and the Engine Owners Manual for Safety,
Operation, and Maintenance Instructions.
READ
AND
SAVE
THESE
INSTRUCTIONS
_RISK
WHAT CAN HAPPEN
o
Spilled gasoline and it's vapors can become ignited from cigarette sparks, electrical arcing, exhaust gases, and hot engine components such as the muffler:.
Heat will expand fuel in the tank which could result in spillage and possible fire explosion°
Operating the pressure washer in an explosive environment could result in a fire..
_
HOW TO PREVENT IT
o
Q
Shut off engine and allow it to cool before adding fuel to the tank.
Use care in filling tank to avoid spilling fuel,
Move pressure washer away from fueling area before starting engine..
Keep maximum fue! level 1/2"below top of tank to allow for expansion,
Operate and fuel equipment in well ventilated areas free from obstructions.
Equip areas with fire extinguisher suitable for gasoline fires.
A!2335
2- ENG
_RISK OF EXPLOSION OR FIRE (continued)
•
WHAT CAN HAPPEN
Materials placed against or near the pressure washer can interfere with its proper ventilation features causing overheating and possible ignition of the materials.
Muffler exhaust heat can damage painted surfaces, melt any material sensitive to heat (such as siding, plastic, rubber, or vinyl), and damage live plants..
Improperly stored fuel could lead to accidental ignition., Fuel improperly secured could get into the hands of children or other unqualified persons°
Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.
Over inflation of tires could result in serious injury and property damage.
HOW TO PREVENT IT
+ Never operate pressure washer in an area containing dry brush or weeds,,
Always keep pressure washer a minimum of four feet away from surfaces (such as houses, automobiles, or live plants) that could be damaged from muffler exhaust
Store fuel in an QSHA approved in a secure location heat..
, Do not spray flammable liquids..
container, away from work area.
Use a tire pressure gauge to check the tires pressure before each use and while inflating tires; see the tire sidewall for the correct tire pressure NOTE: Air tanks, compressors, and similar equipment used to inflate tires can fill small tires similar to these very rapidly. Add air in small increments and frequently use the l tire gauge to prevent over inflation.
_RISK
D
WHAT CAN HAPPEN
Breathing exhaust fumes will cause serious injury or death! Engine exhaust contains carbon monoxide, an odorless and deadly gas.
Some cleaning fluids contain substances which could cause injury to skin, eyes, or lungs..
TO BREATHING
HAZARD
HOW
TO PREVENT
IT
O
o
o
Operate pressure washer in a well ventilated area. Avoid enclosed areas such as garages, basements, etc.
Never operate unit in a location occupied by humans or animals.
Use only cleaning fluids specifically recommended for high pressure washers.
Follow manufacturers recommendations.
Do not use chlorine bleach or any other corrosive compound.
_RISK OF CHEMICAL
HAZARD
WHAT CAN HAPPEN o
Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death
HOW TO PREVENT IT
°
Do not use acids, gasoline, kerosene, or any other flammable materials in this product.
Use only household detergents, cteaners and degreasers recommended for use in pressure washers
Wear protective clothing to protect eyes and skin from contact with sprayed materials.
3- ENG A12335
HAZARD
RISK TO FLUID INJECTION
WHAT CAN HAPPEN
Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury,.
Leaks caused by loose fittings or-worn or damaged hoses can result in injection injuries.
DO NOT TREAT FLUID INJECTION
AS A SIMPLE CUT! See a physician immediately!
Injuries can result if system pressure is not reduced before attempting maintenance or disassembly
HOW TO PREVENT IT
o o o
6
o
Never place hands in front of nozzle..
Direct spray away from self and others_
Make sure hose and fittings are tightened and in good condition.
Never hold onto the hose or fittings during operation..
Do not allow hose to contact muffler:
Never attach or' remove wand or hose fittings while system is pressurized.
• To relieve system pressure, shut off engine, turn off water supply, and pull gun trigger until water stops flowing..
• Use only hoses and accessories rated for pressure higher than your pressure washer's PSI.
_RISK OF ELECTRICAL
HAZARD
WHAT CAN HAPPEN o Spray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock..
HOW TO PREVENT IT
° Unplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches.
A12335
RiSK
HAZARD
WHAT CAN HAPPEN
Contact with hot surfaces, such as engines exhaust components, could result in serious burn.
HOW TO PREVENT IT
During operation, touch only the control surfaces of the pressure washer. Keep children away from the pressure washer at all times. They may not be able to recognize the hazards of this product..
HAZARD
RISK OF INJURY OR PROPERTY DAMAGE
WHEN TRANSPORTING OR STORING
WHAT CAN HAPPEN
Fuel or oil can leak or spill and could result in fire or breathing hazard, serious injury or death can result. Fuel or oil leaks will damage carpet, paint or other" surfaces in vehicles or trailers.
HOW
TO PREVENT
IT tf pressure washer is equipped with a fuel shut-off valve, turn the valve to the off position before transporting to avoid fuel leaks If pressure washer is not equipped with a fuel shut-off valve, drain the fuel from tank before transporting,
Only transport fuel in an OSHA approved container. Always place pressure washer on a protective mat when transporting to protect against damage to vehicle from leaks,. Remove pressure washer from vehicle immediately upon arrival at your destination.
4- ENG
_RiSK a
Unsafe operation of your pressure washer could lead to serious injury or death to you or others.
if proper followed, serious
OF UNSAFE
HAZARD
WHAT CAN HAPPEN starting engine procedure can kickback hand and arm injury.
is not causing
HOW TO PREVENT IT o Do not use chlorine bleach or any other corrosive compound.
o Become familiar with the operation and controls of the pressure washer.
° Keep operating area clear of all persons, pets, and obstacles
.
Do not operate the product when fatigued or under the influence of alcohol or drugs,. Stay aler_ at all times
° Never defeat the safety features of this product,
Do not operate machine with missing, broken, or unauthorized parts,.
° Never leave wand unattended while unit is running.
o
If engine does not start after two pulls, squeeze trigger of gun to relieve pump pressure.
Pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kickback and prevent hand or arm injury.
Keep children away from the pressure washer at all times.
The spray gun/wand is a powerful cleaning tool that could look like a toy to a child,.
Reactive force of spray will cause gun/ wand to kickback, and could cause the operator to slip or fall, or misdirect the spray° improper control of gun/wand can result in injuries to self and others,
.
Do not overreach support.
standing or stand on an unstable
Do not use pressure washer on a ladder.
while
• Grip gun/wand firmly with both hands,.
Expect the gun to kickback when triggered,
_RISK
•
WHAT
OF INJURY
HAZARD
CAN HAPPEN
High velocity fluid spray can cause objects to break, propelling particles at high speed.
Light or unsecured objects can become hazardous projectifes_
HOW TO PREVENT IT e
Always wear ANSI approved Z87 safety glasses .Wear protective clothing to protect against accidental spraying.
• Never point wand at, or spray people or animals..
• Always secure trigger lock when wand is not in service to prevent accidental operation.
° Never permanently secure trigger in pull back (open) position.
5-ENG A12335
Engine Frame and
Wheei Assembly
Operation
Manual
©
Chemical
Hose
Nozzle
Cleaning
Tool
Nozzle
Holder
Engine
Manual
I
Bagged Pa_s
Quick
Connect
Nozzles
Spray Gun
High Pressure
Hose
Quick Connect Spray Wand
Handfe
2.
¸ !i
Attach high pressure hose to gun.
Tighten securely,
3.
Connect wand to
gun. Tighten securely,,
4_
Place handle assembly onto frame, depress the snap buttons, and slide the handle assembly onto the frame until snap buttons snap into place,
Place the nozzle holder onto the panel (located on the handle assembly) and push each nozzle holder into place.
5_
Remove five colored quick connect nozzles from plastic bag and insert them into correct grommet on the nozzle holder:
NOTE: Nozzles are color coded to match colored nozzles on panel.
NOTE: The pump on this unit is maintenance free and requires no oil, if there is a problem with the pump contact an Authorized Service Center.
6.
Use a tire pressure gauge to check the tires pressure before each use and while inflating tires; see the tire sidewall for the correct tire pressure.
NOTE: Air tanks, compressors, and similar equipment used to inflate tires can fill small tires similar to these very rapidly.
Add air-in small increments and frequently use the tire gauge to prevent over inflation.
Risk of Bursting.
Over inflation of tires could
result
in serious injury and property damage,
A12335 6 - ENG
Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments.
Save this manual for future reference.
Spray
Gun
High
Pressure
Quick
Connect
Spray Wand
High Pressure
Pump (located inside the shroud)
Engine
BASIC ELEMENTS OF A
PRESSURE WASHER
High Pressure Pump (located inside the shroud): Increases the pressure of the water supply.
Engine: Drives the high pressure pump.
High Pressure Hose: Carries the pressurized water from the pump to the gun and spray wand°
Spray Gun: Connects with spray wand to control water flow rate, direction, and pressure.
Quick Connect Spray Wand: Allows the user to quickly change out highpressure nozzles.
See How To Use
Spray Wand instructions in this section_
Chemical Hose (not shown): Feeds cleaning agents into the pump to mix with the water, See How To
Apply Chemicals/Cleaning instructions in this section,
Solvents
7_ ENG
BASRC ELEMENTS OF AN
ENGINE
Refer to the engine manual for location and operation of engine controls.
Choke Control: Opens and closes carburetor choke valve_
Starter Grip: Pulling starter grip operates recoil starter to crank engine.
Engine
Switch: Enables and disables ignition system,
PRESSURE WASHER
TERMINOLOGY
PSI: Pounds per Square Inch_ The unit of measure for water pressure,
Also used for air pressure, hydraulic pressure, etc,
GPM: Gallons Per Minute, The unit of measure for the flow rate of water,
CU: Cleaning Units, GPM multiplied by PSI_ GPM x PSI = CU
A12335
Bypass Mode: Allows water to re-circulate within pump when the gun trigger is not pulled.
Allowing the unit to run for more than two minutes without the gun trigger pulled could cause damage to the pump.
overheating and
Chemical Injection System: Mixes cleaners or cleaning solvents with the water to improve cleaning effectiveness_
Water Supply: All pressure washers must have a source of water: The minimum requirements for a water supply are 20 PSI and 5 gallons per minute,
PRESSURE WASHER
OPERAT|NG FEATURES
PRESSURE ADJUSTMENTS
The pressure setting is preset at the factory to achieve optimum pressure and cleaning.
If you need to lower the pressure, it can be accomplished these methods_ by
1.
Back away from the surface to be cleaned.
The further away you are, the less the pressure will be on the surface to be cleaned.
2.
Change to the 40 ° nozzle -
(white) this nozzle delivers a less powerful stream of water and a wider spray pattern.
DO NOT attempt to increase pump pressure.
A higher pressure setting than the factory set pressure may damage pump,
READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT
When using the high pressure setting, DO NOT allow the high pressure spray to come in contact with unprotected skin, eyes, or' with any pets or animals.
Serious injury can occur:
Your washer' operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury.
Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries.. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!
NEVER fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank°
NEVER fill fuel tank completely., Fill tank to 1/2" below bottom of filler neck to provide space for fuel expansion.
Wipe any fuel spillage from engine and
equipment
before starting engine.
NEVER run engine indoors or in enclosed, poorly ventilated areas° Engine exhaust contains carbon monoxide, an odorless and deadly gas.
DO NOT let hoses come in contact with very hot engine rnuffler during or immediately after use of your pressure washer.
Damage to hoses from contact with hot engine surfaces will NOT be covered by warranty,
NEVER pull water supply hose to move pressure washer: This could damage hose and/or pump inlet.
DO NOT use hot water; use cold water only,
NEVER turn water supply off while pressure washer engine is running or damage to pump will result.
DO NOT stop spraying water for more than two minutes at a time° Pump operates in bypass mode when spray gun trigger is not pressed, if pump is left in bypass mode for more than two minutes internal components of the pump can be damaged.
If you do not understand these precautions, speak to a service representative for further please call 1-800-888-2468 instructions.
to
A12335 8- ENG
TO USE SPRAY WAND
The nozzles for the spray wand are stored in nozzle holder on the panel assembly, Colors on the panel identify nozzle location and spray pattern° See chart to choose the correct nozzle for the job to be performed°
CHANGING NOZZLES ON SPRAY
WAND
Risk of Flying
Object could cause risk of serious
injury. DO
NOT attempt to change nozzles while pressure washer is running.
Turn engine off before changing nozzles.
1.
Pull quick connect coupler back and insert nozzle.
2.
Release quick connect coupler and twist nozzle to make sure it is secure in coupler.
Nozzle Color Red
0o
Yellow
15 °
Risk of Flying
Object could cause risk of serious injury.
Ensure nozzle is completely inserted in QC socket, and QC snap ring is fully engaged
(forward) before squeezing trigger.
gun
Risk of injection or injury to person.
Do not direct discharge stream toward persons, unprotected skin, eyes, or any pets or animals.
Serious injury can occur.
......
Green
25 °
White i
40 °
Black low pressure
Uses
_owerful pinpoint for very intense cleaning intense cleaning of small areas intense covers wide cleaning of areas of larger areas icteaning applies cleaning solutions
Metal or metal, Ilmetal' metal, metal, concrete
DO NOT use concrete, or
......
lconcrete,
Jwood
or concrete, concrete, wood, or iwood, or vinyl v[ioy!
*
The high pressure spray from your pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs.
Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.
9_ ENG A12335
HOW TO APPLY CHEMICALS
AND CLEANING SOLVENTS
Applying chemicals or cleaning solvents is a low pressure operation.
NOTE: Use only soaps and chemicals designed for pressure washer use_ Do not use bleach.
To Apply chemicals:
1.
Press chemical hose onto barbed fitting located near high pressure hose connection of pump as shown
2.
Place other end of chemical hose with filter on it into container holding chemical/cleaning solution° NOTE: For every 7 gallons of water pumped 1 gallon of chemical/cleaning be used, solution will
3.
Install low pressure (black} nozzle into quick connect fitting of spray wand, see How To Use
Spray Wand paragraph in this section.
4.
After use of chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly, If chemicals remain in the pump it could be damaged.
Pumps damaged due to chemicals will not be covered under warranty.
NOTE: Chemicals and soaps will not siphon when spray wand is in the high pressure setting,,
STARTING
Prior to starting, refer to your engine manual for proper starting procedure.
1.
In a well ventilated outdoor area add fresh, high quality, unleaded gasoline with a pump octane rating of 86 or higher.
Do not overfill.
Wipe up spilled fuel before starting the engine,.
Refer to Engine Owners Manual for correct procedure.
2.
Check engine oil level.
See
Engine Owners Manual for correct procedure.
3.
Verify the filter screen is in water inlet of pump_ NOTE:
Cone side faces out,,
4.
Connect water source to pump inlet. NOTE:
Water source must provide a minimum of 5 gallons per- minute at
2O PSI.
5.
Connect high pressure hose to pump outleL
Water
Source
6.
if applying a chemical or cleaning solution, see How
To Apply Chemicals/Cleaning
Solvents instructions in this section°
7.
Turn water source on.
NOTE: Failure to do so could cause damage to the pump.
At2335 10-ENG
8.
Start engine.
See Engine
Owners Manual for correct procedure.
NOTE: When engine rope is pulled, pressure starts building in the gun. If the engine does not start after two pulls, pull the gun trigger to relieve this pressure°
9.
Depress trigger on gun to start water flow.
NOTE: Stand on a stable surface and grip gun/spray wand firmly with both hands.
Expect the gun to kick when triggered,
10.
Release trigger to stop water flow.
11.
Adjust nozzle spray for the task being performed.
See How
To Use Wand instructions in this section.
SHUTTING
DOWN
1.
After each use, if you have applied chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly, NOTE: Failure to do so could cause damage to the pump.
2.
Turn engine off. See Engine
Owner's Manual.
NOTE: NEVER turn the water off with the engine running,
3, Turn water source off.
4, Pull trigger on spray gun to relieve any water pressure in hose or spray gun°
5, See Storage section in this manual for proper storage procedures,
11- ENG A12335
When perlorming maintenance_ may be exposed
to hot surfaces, you
water
pressure, or moving parts that can cause
serious injury or death!
Before performing any maintenance or repair, disconnect
spark
plug wire, let engine cool and release all water pressure.
The engine contains
flammable fuel.
DO NOT smoke
or work
near open
flames
while performing maintenance.
To ensure efficient operation and longer life of your pressure washer; a
routine maintenance schedule should be prepared and followed., If the pressure washer is used in unusual conditions, such as high-temperatures or dusty conditions, more frequent maintenance checks will be required.
ENGINE
Consult the Engine Owners
Manual for the manufacturer's
recommendations
for any and all maintenance.
Consult the Engine
Owners Manual for the manufactur _ er's recommendations for any and all maintenance_ NOTE: The frame is equipped with an oil drain hole to help make changing the engine oiI easier.
PUMP
The pump on this unit is maintenance free and requires no oil, if there is a problem with the pump contact an
Authorized Service Center.
NOZZLE CLEANING
If the nozzle becomes clogged with foreign materials, such as dirt, excessive pressure may develop.
If the nozzle becomes partially clogged or restricted, the pump pressure will pulsate.
Clean the nozzle immediately using the nozzle kit supplied and the following instructions:
1.
Shut off the pressure washer and turn off the water supply.
2=
Pull trigger on gun handle to relieve any water pressure.
4.
1
Disconnect the spray wand from the gun.
Remove the high-pressure nozzle from the spray wand.
Remove any obstructions with the nozzle cleaning toot provided and backflush with clean water:
5.
6.
Direct water supply into spray wand to backflush loosened particles for 30 seconds_
Reassemble the nozzle to the wand,
7.
Reconnect spray wand to gun and turn on water supply_
8.
Start pressure washer' and place spray wand into high pressure setting to test°
HOW TO CLEAN
THE WATER iNLET
FALTER
This screen filter should be checked periodically and cleaned if necessary.
1.
Remove filter by grasping end and removing it from water inlet of pump as shown,
2.
Clean filter by flushing it with water on both sides.
3.
Re-insert filter into water inlet of pump, NOTE: Cone side faces out_
NOTE: Do not operate pressure washer without filter properly
installed_
At2335 12- ENG
ENGINE
Consult the Engine Owners Manual for the manufacturer's recommendations for storage.
PUMP
The manufacturer recommends using a pump protector/winterizer, such as
EXA80, when storing the unit for more than 30 days and/or when freezing temperatures are expected, If a pump protector/winterizer is not available,
*RV antifreeze needs to be run through the pump as outlined in the steps below.
NOTE: Using a pump protector/winterizer or *RV antifreeze is to provide proper lubrication to the internal seals of the pump regardless of temperature or
environment,
1.
Obtain a funnel, six ounces of*RV antifreeze, and t6 - 36 inches of garden hose with a male hose connector attached to one end.
Use only RV antifreeze.
other antifreeze is corrosive
Any and can damage pump,
2.
Disconnect spark plug wire,
3.
Connect length of garden hose to water inlet of pump.
4.
Add *RV antifreeze to hose as shown._
5.
Pull engine starter rope slowly several times until antifreeze comes out of high pressure hose connection of pump.
6.
Remove garden hose from water inlet of pump,,
7.
Reconnect spark plug wire.
*Windshield washer fluid may also be used
PRESSURE WASHER
1.
Drain all water from high pressure hose, coil it, and store it in cradle of the pressure washer handle.
2.
Drain all water from spray gun and wand by holding spray gun in a vertical position with nozzle end pointing down and squeezing trigger.
Store in gun holder,,
3.
Store chemical hose so it is protected from damage.
4.
if space is needed, remove handles and replace as shown,.
13- ENG A12335
PROBLEM
Engine will not start (see
Engine Manual for further engine troubleshooting)
No or low pressure
(initial use)
CAUSE
No fuel
Pressure builds up after two pulis on the recoil starter or after initial use_
Choke lever in the "No Choke"
3osition
CORRECTION
Add Fuel.
Squeeze gun trigger to relieve pressure,,
Spark plug wire not attached.
Engine ON!OFF switch in OFF
)osition,.
Choke lever in the "Choke"
3osition on a "hot" engine or an engine that has been exposed to thermal heat for a long period of time,
Spray wand not in high pressure,,
Move choke to the "Choke" position.
Attach spark plug wire,.
Place engine ON/OFF switch in
ON position,
Move choke to the "No Choke" position_
Low water supply.
Leak at high pressure hose fitting°
Nozzle obstructed,
See How to Use Spray Wand instructions in the Operation
Section.
Water supply must be at least 5
GPM @ 20 PSI,
Repair leak. Apply sealant tape if necessary,
See Nozzle Cleaning instructions in the Maintenance section.
Remove and clean filter,.
Water filter screen clogged,.
Air in hose,
Choke lever in the "Choke" position.
High pressure hose is too longo
Turn off the engine, then the water source.. Disconnect the water source from the pump inlet and turn the water source on to remove all air from the hose..
When there is a steady stream of water present, turn water source off. Re-connect water source to pump inlet and turn on water source. Squeeze trigger to
remove remaining air'
Move choke to the "No Choke" position,
Use high pressure hose under
1O0 feet,
A!2335
14ENG
PROBLEM
Will not draw chemicals
CAUSE
Spray wand not in low pressure°
Chemical filter clogged,,
Chemical screen not in cleaning solution.
Chemical too thick.
No or low pressure
(after period of normal use)
Water leaking at gun/ spray wand connection
Water leaking at pump
Pump
Pulsates
Pressure hose is too long
Chemical build up in chemical injector.
Worn sea! or packing
Worn or obstructed valves.
Worn unloader piston,
Worn or broken o-ring.
Loose hose connection.
Loose connections.
Piston packings worn.
Worn or broken o-rings,
Pump head or tubes damaged from freezing.
Nozzle obstructed.,
CORRECTION
See How to Use Spray Wand paragraph in the Operation
Section..
Clean filter.
Make sure end of chemical hose is fully submerged into cleaning solution,
Dilute chemical Chemical should be the same consistency as water.
Lengthen water supply hose instead of high pressure hose.
Have parts cleaned or replaced by AWSC.
Have replaced by AWSC
Have replaced by AWSC,
Have replaced by AWSC.
Check and replace.
Tighten.
Tighten.
Have replaced by AWSC.
Have replaced by AWSC,
Have replaced by AWSC,
See Nozzle Cleaning paragraph in the Maintenance section for the correct procedure_ t5ENG At2335
DeVilbiss Air Power Company warrants to the original purchaser who uses the product in a consumer" application (personal, residential or household usage) that all products covered under this warranty are free from defects in material and workmanship for one year from the date of purchase
All products covered by this limited warranty which are used in commercial applications (i..e., income producing) are warranted to be free of defects in material and workmanship for 90 days from the date of original purchase_ Products covered under this warranty include air compressors, air tools, service parts, pressure washers, and generators.
DeVilbiss Air Power' Company wilt repair or replace, at DeVifbiss' option, products or components which have failed within the warranty period.. Service will be scheduled according to the normal work flow and business hours at the service center location, and the availability of replacement parts. All decisions of DeVitbiss Air Power Company with regard to this limited warranty shall be final,
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state
RESPONSIBILITY
OF ORIGINAL PURCHASER (initial User):
= To process a warranty claim on this product, DO NOT return it to the retailer The product must be evaluated by an Authorized Warranty Service Center For the location of the nearest Authorized
Warranty Service Center call t-800-888-2468, 24 hours a day, 7 days a week or visit our web site
@ devap..com.
o Retain original cash register sales receipt as proof of purchase for warranty work.
o Use reasonable care in the operation and maintenance of the product as described in the Owners
Manual(s).
o Deliver or ship the product to the nearest Authorized Warranty Service Center Freight costs, if any, must be paid by the purchaser;.
o Air compressors with 60 and 80 gallon tanks will be inspected at the site of installation. Contact the nearest Authorized Warranty Service Center' that provides on-site service calls for' service call arrangements.
= If the purchaser does not receive satisfactory results from the Authorized Warranty Service Center, the purchaser should contact DeVilbiss Air Power' Company,
THIS WARRANTY DOES NOT COVER:
° Merchandise sold as reconditioned, used as rental equipment, or floor or display models o Merchandise that has become damaged or inoperative because of ordinary wear; misuse*, cold, heat, rain, excessive humidity, freeze damage, use of improper chemicaEs, negligence, accident, failure to operate the product in accordance with the instructions provided in the Owner's Manual(s) supplied with the product, improper maintenance, the use of accessories or attachments not recommended by DeVilbiss Air' Power Company, or unauthorized repair or' alterations,.
"
An air compressor that pumps air more than the recommended duty cycle during a one hour period may be considered misuse.
° Repair and transportation costs of merchandise determined not to be defective.
Costs associated with assembly, required oil, adiustments or other installation and start-up costs.
o Expendable parts or accessories supplied with the product which are expected to become inoperative or unuseable after a reasonable period of use, including but not limited to sanding disks or pads, saw and shear blades, grinding stones, springs, chisels, nozzles, o-rings, air'jets, washers and similar' accessories.
= Merchandise sotd by DeVitbiss Air Power Company which has been manufactured by and identified as the product of another company, such as gasoline engines. The product manufacturer's warranty, if any, will apply
= ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT
MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF THE PRODUCT IS
NOT COVERED BY THIS WARRANTY, Some states do not allow the exclusion or ]imitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you
, IMPLIED WARRANTIES, IrqCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR FROM THE DATE OF ORIGINAL
PURCHASE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you
BeVILBI$$
_------"_2I
A#R PO#tfER
COMPANY
3 Industrial
DAve, Jackson, TN 38301-96t5
Telephone:
1-860-888-2468
FAX:
1_800-888-9036
A12335 16- ENG

Public link updated
The public link to your chat has been updated.
Advertisement