Samsung HW-K450/ZA-ZZ01 Sound Bar Owner's Manual

Add to my manuals
35 Pages

advertisement

Samsung HW-K450/ZA-ZZ01 Sound Bar Owner's Manual | Manualzz
 magine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
WWW. Samsung.com/register
Samsung Remote App
Hold the control of your Soundbar In the palm of your
hand with an Android smart device and the Samsung
Audio Remote app. This convenient app lets you control
all the Soundbars basic functions such as power,
volume, and the media controls, and lets you control
customizable functions such as the equalizer.
Surround Sound Expansion
The Surround Sound Expansion feature adds depth and
spaciousness 10 your listening experience.
TV SoundConnect
Listen to TV audio through the Soundbar by connecting
your TV and the Soundbar via Bluetooth with
TV SoundConnect. Easy connectivity and the absence of
trailing wires between the Soundbar and TV allows you
to showcase the slim and sleek design of both systems,
while maintaining a clean look in your living environment.
Easily control the Soundbar and TV from a single TV
remote,
HDMI
HDMI transmits digital video and audio signals
simultaneously, and provides a clearer picture.
The unit is also equipped with the ARC function which
lets you listen to sound from your TV through the
Soundbar via an HDMI cable. This function is only
available if you connect the unit to an ARC compliant TV.
USB Host Support
You can connect and play music files from external USB
storage devices such as MP3 players, USE flash
memory, etc. using the Soundbars USB HOST function.
Bluetooth Function
You can connect a Bluetooth device to the Soundbar
and enjoy music with high quality stereo sound, all
without wires!
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
For DTS patents, see http/patents.dts.com.
Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS 2.0 Channel is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
E |
The terms HDMI and HDMI High-Defintion Multimedia
interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the
United States and other countries.
e |e following also applies to the Wireless Subwoofer (PS-WK450).
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighting flash and arrowhead within the triangle
indicates that there is dangerous voltage Inside the
product.
RISK OF ELECTRIC SHOCK,
DO NOT OPEN. The explanation point within the triangle indicates
that there are important instructions accompanying
the product.
Class ll product : This symbol indicates that a safety connection to electrical earth (ground) is not required.
AC voltage : Rated voltage marked with this symbol is AC voltage
а за ка DC voltage : Rated voltage marked with this symbol is DC voltage.
A Caution. Consult instructions for use : This symbol instructs the user to consult the user manual for further
safety related information.
WARNING
¢ To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
* To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
¢ This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
CAUTION
* [Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.
¢ To turn this apparatus off completely, you must pull the power plug out of the wall socket, Consequently, the power plug must be
easily and readily accessible at all times.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent
electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for
connections.
FCC NOTE {for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmiul interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmiul interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try fo correct the interference by one or more of the following measures:
¢ Reorienting or relocating the receiving antenna.
# Increasing the separation between the equipment and receiver.
¢ Connecting the equipment to an outlet that is on a different circuit than the radio or TV.
¢ Consulting the dealer or an experienced radio/TV technician for help.
Caution : FCC regulations state that any unauthorized changes or modifications fo this equipment may void the user's authority to
operate it,
important Safety Instructions
Read these operating instructions carefully before using the unit. Follow ali the safety Instructions listed below. Keep these operating
instructions handy for future reference.
1) Read these instructions.
2) Keep these Instructions.
3) Heed all warnings.
4) Follow all instructions.
5} Do not use this apparatus near water.
6 Clean only with a dry cloth,
7 Donot block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not Install near any heat sources such as radiators, heat registers, stoves, or other apparatus {including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer,
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13} Unplug this apparatus during lightning storms or when unused for long periods of time,
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) Do not expose this apparatus to dripping or splashing and put no objects filled with liquid, such as vases, on the apparatus.
16) WARNING: To reduce the risk of fire rr electric shock, do not expose this apparatus to rain or moisture,
17) To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be
easily and readily accessible at all times.
18) WARNING: DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD.
a. The remote control supplied with this product contains a coln/button cell battery. If the coin/ button cell battery is swallowed, it
can cause severe infernal bums in just 2 hours and can lead to death.
b. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the remote
and keep it away from children.
c. Tf you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
d. CAUTION: Danger of explosion If battery is incorrectly replaced. Replace only with the same or equivalent type.
eg. Caution: Do not expose batteries to direct sunlight or to other sources of excessive heat such as fire, electric heaters, sfc.
Excessive heat can cause batteries to explode.
Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker
located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space
around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers
or other equipment which may become hot. This unit is designed for continuous use. To fully tum off the unit, disconnect
the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.
p O direct sunig or other heat
wall outiet. Voltage peaks due to lightning could damage sources. This could lead to overheating and cause the
the unit. unit to malfunction.
Protect the product from moisture (Le. The battery used with this product contains chemicals
excess heat (e.g. a fireplace) or equipment creating that are harmful to the environment. Do not dispose of
strong magnetic or electric fields. Unplug the power the battery in the general household trash. Do not
cable from the AC wall socket if the unit malfunctions. expose the battery to excess heat, direct sunlight, or fire.
Your product is not intended for industrial use. It is for Do not short circuit, disassemble, or overheat the battery.
personal use only. Condensation may occur if your Danger of explosion if the battery is replaced incorrectly.
product has been stored in cold temperatures. Replace only with the same or equivalent type.
If transporting the unit during the winter, wait
approximately 2 hours until the unit has reached room
temperature before using.
WARNING: DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD. The remote control supplied with
this product contains a coin/button cell battery. if the coin/button cell battery is swallowed, it can cause
severe internal bums in just 2 hours and can lead to death. Keep new and used batteries away from
children. If the battery compartment does not close securely, stop using the remote and make sure to
keep it away from children. Hf you think the battery might have been swallowed or placed inside any part of the body,
seek immediate medical attention.
| GETTING STARTED
GETTING STARTED 27 FUNCTION
Features 27 input Mode
Safety Information 28 Bluetooth
What's included 31 Software Update
2
2
3
7
DESCRIPTIONS
Front / RIGHT SIDE Panel 32 Troubleshooting
9 Bottom Panel
10 Remote Control 33 APPEND
33 Specifications
© ©
NSTALLATION
13 Installing the Soundbar Е TA Te
13 Installing the Wall Mount ‚Роже: and ilustrations in this Usor Manual are
18 «Connecting the Subwoofer
19 Connecting the Subwoofer and the
SWA-80008 (Sold Separately)
20 Connecting the Surround Speakers
(Sold Separately)
21 Connecting to a TV
21 Connecting to a TV Using a Digital Optical
Cable
22 Connecting to a TV Using an HDMI (Digital)
Cable
22 TV SoundConnect
24 Connecting to External Devices
24 Optical or Analog Audio Cable
25 HDMI Cable
25 USB
GETT
Note the following terms before reading the user manual.
> Icons used in this manual
icon “ Term e es CLI Definition : e wl EEE
E". Caution Indicates a situation where a function does not operate or settings may be canceled.
Note Indicates tips or instructions on the page that help you operate a function.
x
Remote Control /
Lithium Battery .
(3V : CR2032) Power Cord : 2EA AC/DC Adapter Optical Cable
(AH59-02733B/ (3903-000853) (BN44-00862A) (AH39-00779A)
4301-001042)
Lo o ol EL 0 |
Wall Mount Guide Holder-Screw : 2 EA Screw : 2 EA
(AHB3-04368A) (AHB1-04110A) (6003-001334)
Bracket-Wail Mount L Bracket-Wall Mount R
(AHB1-04106A) (AHB1-04114A)
x A
e [he appearance of the accessories may differ slightly from the illustrations above.
e [he Micro USB and HDMI cables are sold separately. To purchase, contact a Samsung Service Center or
Samsung Customer Care.
= / = (Volume) Button
Controls the volume level.
The numeric value of the volume level appears in the front
panel display.
— ] (Source) Button
Selects the DUN, AUX, HDMI, BT, TV, or USB input.
e While the unit is powered on, pressing the — ] (Source)
button for more than 3 seconds sets the button to act
as the Z (Mute) button. To cancel the CZ (Mute)
button setup, press the =] (Source) button for more
than 3 seconds again.
Right Side
(Power) Button
Turns the power on and off.
Displays the current mode.
e When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.
e When you tum on this unit, there will be a 4 to 5 second delay before it produces sound.
e [I you want to enjoy sound only from the Soundbar, you must turn off the TV's speakers in the Audio Setup
menu of your TV. Refer to the owner's manual supplied with your TV.
DIGITAL AUDIO IN!
(OPTICAL)
Connect to the digital (optical)
output of an external device.
(Micro USB Porte
Connect a Micro USB to
Standard USB acapter (not
supplied) to the Micro USB port,
and then connect a USB device
to the adapter to play music
from the USB device. Refer to
the USB Cable specification on
page 25.
AUX IN &—-
Connect to the Analog output of
an external device.
HDMI IN
Inputs digital video and audio signals simultaneously using
an HDMI cable. Use when connecting a supported external
device.
HDMI OUT (TV-ARC)
Outputs digital video and audio signals simultaneously
using an HDMI cable.
m DC 24V
(Power Supply In)
Connect the AC/DC power
adaptor to the power supply
jack, and then connect the
AC/DC power adaptor plug
to a wall outlet,
Do not pull the cable.
e When disconnecting the power cable of the AC/DC power adaptor from a wall outlet, pull the plug.
e Do not connect this unit or other components to an AC outlet until all connections between components
are complete.
e Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it
is hanging with the AC cord input facing upwards, water or other foreign substances could enter the
Adapter and cause the Adapter to malfunction.
SOURCE
Press to select a source connected to the Soundbar.
Mute
You can turn the volume down to O with the push of a button.
Press again to restore the sound to the previous volume level.
Repeat
Press to set the Repeat function during music playback from a USE device.
OFF « REPEAT : Cancels Repeat Playback.
TRACK - REPEAT : Plays a track repeatedly.
ALL - REPEAT : Plays all tracks repeatedly.
RANDOM - REPEAT : Plays tracks in random order repeatedly.
(A track that has already been played may be played again.)
Skip Forward
If there is more than one file on the device you are playing, and you press
the >51 button, the next file is selected.
Bluetooth POWER
Press the Bluetooth POWER button on the remote to tum the Bluetooth
POWER On function on and off. See pages 23 and 29 for details.
((0)) SOUND
Surr.Sound adds depth and spaciousness to the sound. Pressing the
(0) SOUND button repeatedly cycles through the Surr.Sound settings :
ON - SURROUND SOUND, OFF - SURROUND SOUND
Press and hold the B button for about 5 seconds to tum the Anynet+ function
on or off.
OFF - ANYNET+, ON - ANYNET+
The Anynet+ function lets you control the Soundbar with the remote from an
Anynet+ compatible Samsung TV.
The Soundbar must be connected to the TV via an HDMI cable.
e Press and hold the € button for about 5 seconds to turn the Auto Power Link
function on or off.
OFF - POWER LINK, ON - POWER LINK
* Auto Power Link
Synchronizes the Soundbar to a connected Optical source via the Optical jack
so it turns on automatically when you turn on your TV. (See page 21)
e This function is only available in the D.IN mode.
® SOUND EFFECT
You can select from 6 different sound modes - STANDARD (Original Sound),
MUSIC, CLEAR VOICE, SPORTS, MOVIE, and NIGHT MODE - depending
on the content you want to listen to.
Select the STANDARD mode if you want to enjoy the original sound.
e Soundbar is a Samsung proprietary name.
eo Operate the TV using the TV's remote control.
Power
Turns the Soundbar on and off.
Volume
Adjusts the volume level of the unit.
Play / Pause
Press the Bil button to pause a file temporarily.
Press the Bil button again to play the selected file.
Skip Back
If there is more than one file on the device you are playing, and you press
the laa button, the previous file is selected.
SOUND CONTROL
Press to select TREBLE, BASS, SUB WOOFER LEVEL, AUDIO SYNC, REAR
SPEAKER, or REAR LEVEL.
Then, use the €, b buttons to adjust the Treble or Bass volume from -6 ~ +6,
SUB WOOFER LEVEL volume from -12, -6 ~ +6.
Press and hold the SOUND CONTROL button for about 5 seconds to adjust
the sound for each frequency band. 150HZz, 300Hz, 600Hz, 1.2KHz, 2.5KHz,
5KHz and 10KHz are selectable and each can be adjusted to a setting between
-6 and +6.
lo adjust the woofer leve! using the Samsung Audio Remote mobile app,
press the 1<<, »l buttons to decrease or increase the woofer level within 3
seconds of pressing the WOOFER button.
If the Soundbar is connected to a digital TV and the video appears out of sync
with the audio, press the SOUND CONTROL button to select AUDIO SYNC to
sync the audio with the video. Use the €, » buttons to set the audio delay
between O ms and 300 ms. in USB mode, TV mode, and BT mode, the Audio
Syne function is not available.
To control the volume of the rear speaker sound, select REAR SPEAKER in
Sound Control, and then adjust the volume between OFF-RS and ON-RS by
using the <, P buttons.
To control the volume of the rear level sound, select REAR LEVEL in Sound
Control, and then adjust the volume between RS -6-+6 by using the <, »
buttons.
es The REAR SPEAKER and the REAR LEVEL mode are only available when
you connect the SWA-8000S (sold separately).
» Controlling the Soundbar using Your TV Remote Control
1. Press and hold the ((0)) SOUND button for more than 5 seconds while the Soundbar is turned on.
2. 'ON- TV REMOTE" appears on the Soundbar's display.
3. Inthe TV's menu, set the TV speaker to external speaker.
TV menus differ by manufacturer and model. Refer to the TV's user manual for further information.
Only the VOLUME +/- and the MUTE buttons will be available to control the Soundbar.
This function is not available when the Soundbar is in the TV SoundConnect, TV ARC, or HDMI mode.
Manufacturers supporting this function:
- VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA
- This function may not be compatible with your TV's remote depending on the remote control's
manufacturer.
e Each time you press and hold the ((0)) SOUND button for 5 seconds, ON-TV REMOTE and OFF-TV
REMOTE alternate.
8 © & 68
1. Use a sul table со! n nto tum the = “2. Inserta a av fithiu um. n battery. Keep the - a Uses a su uitable coi into
ce ‘remote control 8 battery сон ped itive (+ A pole facing up when seing tum the remote. control. -
GE oon nterclockw se to remove i E В batty cover clock se. a ;
> Installation Precautions
e Install ona vertical wall only.
® [or the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of
the set.
e Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the
unit on a different wall that can support the unit's weight.
e [Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board,
wood, etc.) If possible, fix the support screws into wall studs.
e [Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar on.
- Diameter: M5
- Length: 1 3/8 inches or longer recommended.
e Connect cables from the unit to external devices before you install it on the wall,
e Make sure the unit is turned off and unpiuggecd before you install it. Otherwise, it may cause an electric shock.
2 inches or more
1. Place the Wall Mount Guide against the wall surface.
¢ The Wall Mount Guide must be level,
e if your TV is mounted on the wall, install the Soundbar at least 2 inches (5 cm) below the TV.
| A SB con & ATYRE : 616mm ET AZ
Le и B TYPE: 16mm A NA
Center Line
2. Align the Wall Mount Guide's Center Line with the center of your TV {if you are mounting the Soundbar below your
TM), and then fix the Wall Mount Guide to the wall using tape.
e If you are not mounting below a TV, place the Center Line in the center of the installation area.
cores | ATYPE: 616mm B O) ve |
B TYPE : Séfhrurs
3. Push a pen tip or sharpened pencil tip through the center of the B-TYPE images on each end of the Guide to
mark the holes for the supporting screws, and then remove the Wall Mount Guide.
4. Using an appropriately sized drill bit, drill a hole in the wall at each marking.
e If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors or
molles into the holes before you insert the support screws. If you use anchors or mollies, make sure the
holes you drill are large enough for the anchors or molles you use.
5. Push a screw (not supplied) through each Holder-Screw, and then screw each screw firmly into a support
screw hole.
6. Use the two Screws (M4 x 14) to attach both Bracket-Wall Mount L and R to the Soundbar's bottom. For a
proper fit, make sure to align the bumps on the Soundbar to the holes on the brackets.
- Rear of Soundbar
Right end of Soundbar
e When assembling, make sure the hanger part of the Bracket-Wall Mounts are located behind the rear of
the Soundbar. See the illustration above.
Wall Mount R Wall Mount L
e [he left and right mounts are different shapes. Make sure to position them correctly.
7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the
Holder-Screws on the wall.
e Slightly tilt the Soundbar to insert both Holder-Screw heads into the Bracket-Wall Mount holes. Push the
Soundbar in the direction of the arrow to make sure both sides are firmly fixed.
1. To separate the Soundbar from the wall mount, push it in the direction of arrow, tilt it up slightly, and then pull it
away from the wall as shown.
nero
e Do not hang onto the installed unit and avoid striking or dropping the unit.
e Secure the unit firmly to the wall so that it does not fall off. IF the unit falls off, it may cause an injury or
damage the product.
e When the unit is installed on a wall, please make sure that children do not pull any of the connecting
cables, as this may cause it to fall.
e For the optimal performance of a wall mount installation, install the speaker system at least 2 inches
(5 cm) below the TV, if the TV is mounted on the wall.
e For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is unlikely
to fall.
e Do not connect the power cord of this product or your TV to a wall outlet until all connections between
components are complete.
e Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
The Subwoofer s linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly)
automatically when the main unit and subwoofer are turned on.
* When the subwoofer ¡is completely connected, the blue LED Link Indicator on the subwoofer stops blinking and
glows continuously.
If the blue LED light does not stop blinking when the main unit and subwoofer are turned on, please set the ID by
following the steps below.
e Important: Before you begin, put the battery into the remote. See page 12 for instructions.
1. Plug the power cords of the main unit and subwoofer into an AC wall outlet,
2. Press the ID SET button on the rear of the subwoofer with a small, pointed object for 5 seconds.
+ The STANDBY indicator turns off and the LINK indicator (Blue LED) blinks quickly.
3. While the main unit is powered off (in STANDBY mode), press and hold the Z (Mute) on the remote control for
5 seconds.
4. The lD SET message appears on the Soundbar s display.
5. To finalize the link, turn the main unit's power on while the subwoofers Blue LED blinks.
«The main unit and the subwoofer should now be linked (connected).
* The LINK indicator (Blue LED) on the subwoofer should be glowing continuously and not blinking.
+ [f the LINK indicator is not solid blue, the linking process has failed. Turn off the main unit and start again from
Step 2.
* You can enjoy better sound from the wireless subwooter by selecting a Sound Effect. (See page 10)
&
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar,
interference may cause some sound interruption.
The maximum transmission distance of the wireless signal between the main unit and subwoofer is about
32.8 ft, but may vary depending on your operating environment. If a steel-concrete or metallic wall is
between the main unit and the wireless subwoofer, the system may not operate at all because the wireless
signal cannot penetrate metal.
If the main unit doesn't make a wireless connection, repeat steps 1-5 on the previous page to re-set the
connection between the main unit and wireless subwoofer
6
6
6
6
The wireless receiving antenna is built into the wireless subwoofer Keep the unit away from water and
moisture.
For optimal listening performance, make sure that the area around the wireless subwoofer location is clear
of any obstructions.
&
Expand to true wireless surround sound by connecting the Samsung Wireless
Rear Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately)
If the blue LED lights do not stop blinking when the main unit, subwoofer, and SWA-8000S are turned on, please reset
the linking ID by following the procedure below.
1. Plug the power cords of the main unit, subwoofer and the SWA-8000S into an AC wall outlet,
2. Press the ID SET button on the back of the subwoofer and the SWA-8000S with a small, pointed object for 5
seconds.
* The LINK indicators (Blue LEDs) of the subwoofer and the SWA-8000S blink quickly.
Press the CZ button on your remote control for 5 seconds while the main unit is turned OFF,
à. The D SET message appears on the display of the main unit for a short period of time, and then disappears.
5. While the subwoofer's and the SWA-8000S's indicators are flashing blue, press the dd button on your remote control or
on the right side of the main unit to turn on the main unit.
6. The connection is complete if the blue LEDs on the subwooter and the SWA-8000S stop blinking and glow
continuously.
ECT
«The main unit, the subwoofer and the SWA-8000S should now be linked (connected).
* The LINK indicators (Blue LEDs) on the subwoofer and the SWA-8000S should be glowing continuously and
not blinking.
+ | the LINK indicators are not solid blue, the linking process has failed. Turn off the main unit, go back to Step 2,
and start again.
e You can enjoy better sound from the wireless subwooter by selecting a Sound Effect. (See page 10)
Surround Speaker (L) Surround Speaker (R)
Wireless Receiver Module
e Place these speakers to the side of your listening position. If there isn't enough room, place these
speakers so they face each other. Position them about 2 to 3 feet above your ear, facing slightly
downward.
e Surround speakers must be connected to the wireless receiver module.
e Each speaker has a colored label on its back or underside. Each cable has a single colored band near its end.
Match the band on each cable to the speaker label by color, and then connect the cable to the speaker.
e Important: Before you begin, put the battery into the remote. See page 12 for instructions.
RÉ RE A ER EEE EA Ath sn
Ë
Ë
Moms ad
DIGITAL AUDIO IN
(OPTICAL)
OPTICAL OUT | . 2 3 Panero a
1. Connect the DIGITAL AUDIO IN (OPTICAL) ¡ack on the Soundbar to the OPTICAL OUT jack of the TV with a
digital optical cable.
2. Press the —] (Source) button on the right side of the Soundbar or the SOURCE button on the remote control to
select the DIN mode.
> Auto Power Link
If you have connected the main unit to a TV with a digital optical cable, you can set Auto Power Link function to
ON and have the Soundbar turn on automatically when you turn the TV on.
1. Connect the Soundbar and a TV with a digital optical cable.
2. Press the —] (Source) button on the main unit’s right side or the SOURCE button on the remote control to select
the D.IN mode.
3. Press and hold the € button on the remote control for about 5 seconds to toggle the Auto Power Link function
on and off.
e Depending on the connected device, Auto Power Link may not function.
e [his function is only available in the DIN mode.
HDMI Cable
{not supplied)
==]
| HDMI IN HDMI QUT
cama (TV-ARC)
,
1. Connect an HDMI cable (not supplied) from the HDMI OÙT (TV-ARC) jack on the bottom of the product to the
HDMI IN jack on your TV.
2. Press the — ] button on the right side of the Soundbar or the SOURCE button on the remote control to select
the D.IN mode.
e HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
e If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
e We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose
diameter is less than 0.55 inches.
e Anynet+ must be turned on.
e [his function is not available if the HDMI cable does not support ARC.
You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the
TV SoundConnect function.
= @ @ © &
Connect
1. Turn onthe TV and Soundbar.
2. Press the —] button on the main unit's right side or the SOURCE button on the remote control to select the TV
mode.
On the TV, a message asking whether to enable the TV SoundConnect function appears.
4. Select <Yes> using the TV's remote control to finish connecting the TV and Soundbar.
e Switching the Soundbar's mode from TV to another mode automatically terminates TV SoundConnect.
e fo connect the Soundbar to another TV, the existing connection must be terminated.
e [0 terminate the existing connection, press and hold the gil bution on the remote for 5 seconds or switch
to another mode. To connect to the other TV, follow Steps 1 through 4 on the previous page.
e Ihe IV SoundConnect (SoundShare) function is supported by some Samsung TVs released from 2012 on.
Check whether your TV supports the TV SoundConnect (SoundShare) function before you begin.
(For further information, refer to the TV's user manual).
e If your Samsung TV was released before 2014, check the SoundShare setting menu.
e |f the distance between the TV and Soundbar exceeds 16.4 ft, the connection may not be stable or the
audio may stutter. If this occurs, relocate the TV or Soundbar so that they are within operational range, and
then re-establish the TV SoundConnect connection.
e | SoundConnect Operational Ranges:
- Recommended pairing range: within 78.7 inches {within 2m).
- Recommended operational range: within 16.4 ft. (Om).
e | he Play/Pause, Next, and Prev buttons on the Soundbar or Soundbar s remote do not control the TV.
> Using the Bluetooth POWER On function
The Bluetooth POWER On function is available after you have successfully connected the Soundbar to a Bluetooth
compatible TV using TV SoundConnect. When the Bluetooth POWER On function is ON, tuming the connected TV an
or off will turn the Soundbar's power on and off as well.
1. Connect the TV to your Soundbar using the TV SoundConnect function.
2. Press the Bluetooth POWER button on the Soundbar remote. ON - BLUETOOTH POWER appears on the
Soundbars display.
е ON - BLUETOOTH POWER : The Soundbar turns on and off when you turn the TV on or off.
s OFF - BLUETOOTH POWER : The Soundbar only turns off when vou turn the TV off,
e | Nis function is supported by some Samsung TVs released from 2013 on.
This unit comes equipped with one digital optical in jack and one analog audio (AUX) in jack, giving you two
ways to connect it to external devices.
Audio Cable
(not supplied)
=>
AUX OUT AUXIN
5D / DVD player / Optical Cable
Set-top box / 7 I mT
Game console OPTICAL OUT DIGITAL AUDIO IN
(OPTICAL)
> AUX Cable
1. Connect AUX IN (Audio) on the main unit to the AUDIO OUT jack of the Source Device using an audio cable.
2. Press the —] (Source) button on the right side of the Soundbar or the SOURCE button on the remote control to
select the AUX mode.
> Optical Cable
1. Connect DIGITAL AUDIO IN (Audio) on the man unit to the OPTICAL OUT jack of the Source Device using a
digital optical cable.
2. Press the —] (Source) button on the right side of the Soundbar or the SOURCE button on the remote control to
select the DIN mode.
HDMI is the standard digital interface for connecting to TVs, projectors, DVD players, Blu-ray players, set top boxes,
and more. HDMI prevents any degradation to the signal due to conversion to analog and maintains the video and ‘
audio quality of the original digital source. ;
Po LEHRER HE
- “
1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the bottom of the product to the HDMI OUT ¡ack
on your digital device.
2. Pressthe —] button on the right side of the Soundbar or the SOURCE button on the remote control to select
the HDMI mode.
You can play music files located on USB storage devices through the Soundbar.
USB port Display
USB Adapter Cable \.
(not supplied)
1. Connect a USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a standard female
2.0 USB jack (Type A) on the other end to the micro USB ¡ack on your Soundbar.
e [he USB adapter cable is sold separately. To purchase, contact a Samsung Service Center or Samsung
Customer Care.
2. Connect your USB device to the female end of the adapter cable,
3. Pressthe —] button on the main unit's right side or the SOURCE button on the remote control to select the
USB mode.
Xe $
4. USB appears on the display screen.
¢ The Soundbar connection to the USB device is complete.
¢ [he Soundbar automatically tums off (Auto Power Off) rí no USB device has been connected for more than
5 minutes,
> Before you connect a USB device
Be aware of the following:
e If the file name of a file on a USE device exceeds 10 characters, it is not displayed on the Soundbars display.
e [his product May not be compatible with certain types of USB storage media.
e [he Soundbar supports the FAT16 and FAT32 file systems.
- The NTFS file system is not supported.
e Connect USB devices to the USB port of the product using a USB 2.0 Micro USB plug to standard female 2.0
USB jack adapter cable. Otherwise, you may encounter a USE compatibility problem.
e Do not connect multiple storage devices to the product via a multi-card reader, it may not operate properly.
e Digital camera PTF protocols are not supported.
e Do not remove the USE device while it is transferring files.
e DRM-protected music files (MP3, WMA) from commercial web sites cannot be played.
e Extemal HDDs are not supported.
e Mobile phone devices are not supported.
e Hie Format Type Compatibility list:
Extension | Codes EE [SampingRate TBitrate
| MPEG Layer? 16KHz - 48KHz 80kbps-320kbps
В => MPEG 1 Layer3 16KHz - 48KHz 80kbps-320kbps
a “| MPEG 2 Layers 16KHz ~ 48KHz 80kbps-320kbps
0) MPEG 25 Layer3 16KHz - 48KHz 80kbps-320kbps
; STE Wave_Format_MSAudio! 16KHz - 48KHz 56kbps-128kbps
TE | Wave_Format MSAudio2 16KHz — 48KHz 56kbps-128kbps
2 НЕ ААС 16KHz - 96KHZ 48kbps-320kbps
“| aCLC 16KHz - 96KHz [OPS OPS
= 5.1ch 320kbps
; © HE-AAC 24KHz - 96KHz #0Kbpe-0AKbps
ли 5.1ch 160kbps
wav 16KHz ~ 48KHz up to 3000kbps
*ogg | 0GG110 16KHz - 48KHz 50kbps-500kbps
*flac | FLACA 0, FLAC 1.2.1 16KHz — 96KHz up to 3000kbps
e If there are too many folders and files stored on the USE device, it may take the Soundbar some time to
access and play files.
Press the =>] (Source) button on the main units side panel or the SOURCE button on the remote contro! to select
the mode you want.
SE Input mode > > ee Display mes
Optical Digital input DIN
ARC (HDMI OUT) input
AUX input AUX
HDMI input HDMI
BLUETOOTH mode BT
TV SoundConnect TV
USB mode USB
> AUTO POWER DOWN FUNCTION
The unit turns off automatically in the following situations.
e D.IN/HDMI/BT /TV/USB / ARC Mode
- lf there is no audio signal for 5 minutes.
e AUX Mode
- lf the AUX cable is disconnected for 5 minutes.
-— ifthere is no KEY input for 8 hours when the AUX cable is connected.
To tum the Auto Power Down function ON or OFF, press and hold the ell button for 5 seconds.
ON - AUTO POWER DOWN / OFF - AUTO POWER DOWN appears on the display.
AL AE
<
E
You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all without wires!
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
Connect
ее & € €
Bluetooth device
1. Press the — (Source) button on the main unit's side panel or the SOURCE button on the remote control to
select the BT mode.
* You will see BT READY on the front display of the Soundbar.
2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's user
manual.)
3. Select the Stereo headset menu on the Bluetooth device.
e You will see a list of scanned devices.
4. Select "[AV] Samsung Soundbar Kxxx K-Series" from the list.
+ When the Soundbar is connected to the Bluetooth device, it will display [Bluetooth device name]— BT on the
front display.
* The device name can only be displayed in English. An underline * _ * will be displayed if the name is not in
English.
+ If the Bluetooth device has failed to pair with the Soundbar, delete the previous Soundbar listing found by the
Bluetooth device and have it search for the Soundbar again.
5. Play music on the connected device.
* You can listen to the music playing on the connected Bluetooth device over the Soundbar.
* In BT mode, the Play / Pause / Next / Prev functions are not available. However, these functions are available
on Bluetooth devices supporting AVRCP
e
It asked for a PIN code when connecting a Bluetooth device, enter <0000>,
Only one Bluetooth device can be paired at a time.
e | he Bluetooth connection will be terminated when you turn the Soundbar off.
The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
- Ifthere is a strong electrical field around the Soundbar.
- If several Bluetooth devices are simultaneously paired with the Soundbar.
- Ifthe Bluetooth device is tumed off, not in place, or malfunctions.
Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device, which can cause electric interference.
The Soundbar supports SBC data (44 1kHz, 48kHz).
Connect only to a Bluetooth device that supports the AZ2DP (AV) function.
You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function.
Once the set has been paired with a device, if the soundbar is in DIN, AUX, or USB Mode and you select
“AV|samsung soundbar Kxxx K-ser” from your Bluetooth device's list, the set will automatically change to
BT mode.
- Available only if the Soundbar is listed among the Bluetooth devices paired devices. (The Bluetooth
device and the Soundbar must have been previously paired at least once.)
Soundbar will appear in the Bluetooth device's searched devices list only when the Soundbar is displaying
BT READY.
® Inthe TV SoundConnect mode, the Soundbar cannot be paired or connected to another Bluetooth device.
e
e
e
e
e
e
e
e
If a previously paired Bluetooth device tries to pair with the Soundbar when the Bluetooth POWER On function is on
and the Soundbar is turned off, the Soundbar tums on automatically.
1. Press the Bluetooth POWER on the remote while the Soundbar is turned on.
2. ON - BLUETOOTH POWER appears on the Soundbar's display.
You can disconnect the Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user manual.
e he Saundbar will be disconnected.
e When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
ВТ DISCONNECTED on the front display.
Press the SOURCE button on the remote control or the we] (Source) button on the product's side panel to switch
from BT to another mode or tum off the Soundbar.
® [he connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before
terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
e In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar
and the Bluetooth device exceeds 16.4 fl.
e he Soundbar automatically tums off after 5 minutes in the Ready state.
> More About Bluetooth
Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a
short wireless connection.
e A Bluetooth device may cause noise or malfunction, depending on usage, if:
- Aparof your body is in contact with the receving/transmitting system of the Bluetooth device or the
soundbar.
- tis subject to electrical vanation from obstructions caused by a wall, comer, or office partition.
- tis exposed to electrical interference from same frequency-band devices including medical equipment,
microwave ovens, and wireless LANs.
e [air the Soundbar with the Bluetooth device while they are close together.
e | he further the distance between the Soundbar and Bluetooth device, the worse the quality is.
if the distance exceeds the Bluetooth operational range, the connection is lost.
e In poor reception areas, the Bluetooth connection may not work property.
e | he Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the
Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as
walls or doors.
e | Nis wireless device may cause electric interference during its operation.
> Installing the Samsung Audio Remote App
Jo control the Soundbar with your smart device and the Samsung Audio Remote app, download the Samsung Audio
Remote app from Google Play store.
Market search : Samsung Audio Remote
> Launching the Samsung Audio Remote App
To launch and use the Samsung Audio Remote app, touch the Audio Remote icon on your smart device, and then
follow the directions on the screen.
Audio Remo
PE Se
ES
ty
e Ihe Samsung Audio Remote app is only compatible with Android mobile phones and mobile devices
running Android OS 3.0 or later.
USB Adapter Cable
(not supplied)
Samsung may offer updates for the Soundbar's system firmware in the future.
If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it
to the USB port on your Sounabar.
Note that if there are multiple update files, you must load them onto the USB device singly and use them to update the
firmware one file at a time.
Piease visit samsung.com or contact the Samsung call center to receive more information about downloading update
files.
This product has a DUAL BOOT function. If the firmware fails to update, you can update the firmware
again.
&
&
&
Connect a USB device containing the firmware upgrade to the standard end of a USB standard jack to
USB Micro plug Adapter cable. Connect the USB Micro plug end of the cable to the USB ¡ack on the main
unit.
Updating firmware may not work properly if audio files supported by the Soundbar are stored in the USB
storage device.
Do not disconnect the power or remove the USB device while updates are being applied. The main unit will
turn off automatically after completing the firmware update.
After the update, all settings are reset to their factory default settings. We recommend you write down your
settings so that you can easily reset them after the update. Note that updating firmware resets the
subwoofer connection too.
If the connection to the subwoofer is not re-established automatically after the update, refer to page 18.
If the firmware fails to update, we recommend formatting the USB device in FAT16 and trying again.
Once the software update is completed, turn off the product and then press and hold the ( 4 } button on
the remote control for more than 5 seconds. “INIT” appears on the display and the unit is powered off. The
updgrade is complete.
Do not format the USB device in the NTFS format. The Soundbar does not support the NTFS file system.
Depending on the manufacturer, some USB devices may not be supported.
Refer to the table below when this product does nat function properly. If the problem you are experiencing is not listed
below or if the instructions below do not help, tum off the product, disconnect the power cord, and contact Samsung
Electronics at 1-800-SAMSUNG (1-800-726-7864).
The unit will not tum on.
# 16 the power cord plugged into the outlet? | > Connect the power plug to the outlet.
Sounds noi produced. — E nn ОНЕННоНИННОЕОЯ :
e Is the Mute function on? > Press the Z (Mute) button to cancel the Mute
e Is the volume set to minimum? function.
=» Adjust the volume.
The remote control does not Work. О ;
* Are the battenes drained? > Replace with new batteries.
® ls the distance between the remote control and main | =+ Move closer to the unit.
unit too far?
® Does your TV support TY SoundCoannect? =» TV SoundConnect is supported by some Samsung
TVs released from 2012 on. Check your TV to see if it
supports TV SoundConnect.
* Is your TV firmware the latest version? > Update your TV with the latest firmware.
* Does an error occur when connecting”? 3 Contact the Samsung Call Center.
> Press and hold the ell button for 5 seconas to reset
the TV SoundConnect connection.
¢ Your subwoofer may not be connected to the > Try to connect your subwoofer again.
main unit of the product. (See Pageta)
5V/ 0.54
— lus
Main Unit
4.4 Ibs (2.0Kg)
“| Weight
pe Subwoofer (PS-WK450)
10.1 Ibs (4.6Kg)
Dimensions | Main Unit
35.8 x 2.2 x 2.8 inches (908.5 x 53.5 x 70.5 mm)
| WXHXD) | Subwoofer (PS-WK450)
7.0x 14.2 x 11.8 inches (179.0 x 361.0 x 299.5 mm)
5 Operating Temperature Range
+41 to +95%
| Operating Humidity Range
10 % to 75 %
| Be. Rated Output | Main Unit
A0W/CH x 4, bohm, THD=10%
“| Power Subwoofer (PS-WK450)
140W, 3ohm, THD=10%
| 8/N Ratio (Analog три?)
65 dB
“| separation (1kH2)
65 dB
Design and specifications are subject to change without prior notice.
S/N ratio, distortion, separation, and usable sensitivity are based on measurements using AES (Audio Engineering
Society) guidelines.
Nominal specification
- Samsung Electronics Co., Lid reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- For mare information about the power supply and power consumption, refer to the label attached to the
product.
- Dispose unwanted electronics through an approved recycler. То find the nearest recycling location,
go to our website: www .samsung.com/recyclingdirect or call (877) 278 - 0799.
x Open Source License Notice
- ‘Oo send inquiries and requests regarding open sources, contact Samsung via Email
([email protected]).
x important Note About Service
e An administration fee may be charged if either:
a. An engineer is called out to your home at your request and there is no defect in the product.
b. You bring the unit to a repair center and there 1s no defect in the product.
e You will be advised of the amount of the administration fee before any work is done or a home visit is made.
e If you have a problem with this product, we strongly recommend you read the appropriate section of this
manual, review the Troubleshooting section an page 32, visit the Support page for your product at
WwwW.samsung.com, or call Samsung Product Support (1-800-726-7564) to find an answer before you contact
a service center for a repair.
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered
new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in
materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor"
(90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.
To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty
service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon
request as proof of purchase 10 SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the
service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned
parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products
become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the
remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG's obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are
set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an
“AS IS” basis, Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties,
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the
extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the
following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for
which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse,
neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies,
accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or
which damage this product or result in service problems; incorrect electrical ine voltage, fluctuations and surges; customer
adiustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered
and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise,
echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free
operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO
OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS
PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS,
FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE
CLAIMS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL
RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT
SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES
ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS
AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT
CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER
THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung
reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED
RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a list of Samsung
authorized retailers, please go to: hitp// www.samsung.com/us/peaceofmind/authorized_resellers.himil
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or imitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG customer care center.
Certification model only
The party responsible for product compliance:
Samsung Electronics Co, LTD.
America QA lab of Samsung
19 Chapin Rd. Building D,
Fine Brook New Jersey 07058
QUESTIONS OR CON
“COUNTRY | €
me CALL MITE TT
USA TOO SAMSUNG | \mwaw.samsung.com/us/suppon ee Chalo jo file ©
= (1-800-726-7864) 9 РР ger Roz
Ridgefield Park, NJ 07660
©2016 Samsung Electronics Co.,Ltd. All rights reserved

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement