Advertisement
Advertisement
SCHWlNN
Schwinn ® IC Bikes
Evolution®,Evolution®SR
FITNESS
Nautilus ® Bowflex® Schwinn®Fitness Pearl Izumi® StairMaster ® Universal® Nautilus lnstitute ®
a brand of _NAUTILUS_
Introduction
Thank you for making the Schwinn ® Evolution ® Bike a part of your exercise and fitness activities. For years to come, you'll be able to rely on Schwinn ® craftsmanship and durability as you pursue your personal fitness goals.
The Schwinn ® Evolution ® Bike is designed to closely simulate the feel and aerobic qualities of road cycling without the associated distractions.
Its unique design, with fixed gearing and a high-inertia flywheel, produces a smooth, intense workout. By combining true road-racing geometry with high quality cycling componentry, you can cycle at far higher RPMs
(revolutions per minute). Cycling at higher cadences and at varying resistance levels develops cardiovascular fitness, leg strength, concentration and balance. The Schwinn ® Evolution ® Bike should enable you to:
•
•
Increase your energy level
Increase cardiovascular and aerobic fitness
•
•
Increase lower body muscle strength
Decrease your overall percentage of body fat
Whether you are just getting started in an exercise program or are already in good shape, the Schwinn ® Evolution ® Bike is designed to be an efficient, challenging, yet enjoyable way to achieve an enhanced level of fitness. You can cycle your way to a slimmer and healthier body.
This Owner's Manual contains all the information you need to operate and enjoy your Schwinn ® Evolution ® Bike. Please read the Owner's Manual in its entirety before getting onto the Schwinn ® Evolution ® Bike.
Let's get started. Take your time and have fun.
2
Owner'sManual
Safety Warnings
Safety Warning Labels
Product Specifications
Features
Operation
Howto use the Schwinn ® Evolution ® Bike
Maintenance
Moving your Schwinn ® Evolution ® Bike
Leveling your Schwinn ® Evolution ® Bike
Maintenance schedule
Chain adjustment
Limited Warranty
Contact Numbers
Table of Contents
8
8
11
11
11
12
13
14
15
6
7
4
5
3
Owner's Manual
Safety Warnings
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Before using this equipment, obey the following warnings"
Read and understand the complete Owner's Manual.
Read and understand all Warnings on this machine.
• Keep children away from this machine. Watch them closely when near the machine. Moving parts that appear dangerousto adults may not appear so to children.
• Consult a physician before starting an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before using the machine again.
• The flywheel momentum of the Schwinn _>IC Bike will keep the pedals turning even after the rider stops pedaling or the rider's feet slip off. DO NOT ATTEMPT TO DISMOUNT THE BIKE ORREMOVEYOURFEETFROMTHE PEDALSUNTIL BOTH THE
PEDALSAND THE FLYWHEELHAVE COMPLETELYSTOPPED.Failure to follow these instructions may lead to loss of control and serious personal injury.
• Examine this machine for loose parts or signs of wear. Contact Nautilus Customer Service for repair information. Use only genuine Schwinn _>IC replacement parts supplied by Nautilus.
• Do not wear loose clothing or jewelry. This machine contains moving parts.
•
•
• Do not place fingers or any other objects into moving parts of the exercise equipment.
• Maximum user weight limit: 300 lb. (136kg). Do not use if you are over this weight.
• Stabilize the pedals before stepping on them and use caution when stepping off the machine.
• Keep at least 19.7 inches (0.5 rn) on each side of the machine clear. This is the recommended safe distance for access and passage around and emergency dismounts from the machine.
• Warn bystanders to keep a safe distance, at least 3 feet (1 m). Do not allow anyone to touch the operator while the machine is in motion.
Keep the foot pedals clean and dry.
Do not over exert yourself during exercise. Operate the machine in the manner described in this manual.
4
Owner'sManual
Safety Warning Labels
BEFORE USING YOUR PRODUCT: Find and read all warning labels. Replace any warning label if damaged, illegible or missing. Call 1-800-864-1270 if you need to replace warning label(s).
Label 1:
General warning label.
Location:
On water bottle holder on main frame.
Label 2:
Location:
Chain warning label.
Inside the chain guard.
Do not touch chain for any reason.
Contact between hands, rags or other objects and moving chain may result in serious injury.
Consult an authorized
Schwinn representative for questions on cleaning or service.
Label 1
Label 2
Serial Number_
5
Owner'sManual
Dimensions
Assembled Unit Weight
Packaged Shipping weight
Workout Area
Maximum User Weight
Product Specifications
50" Lx 22.5" Wx 40" H (127cm x 57cm x 102cm)
119 Ibs (54 kg)
124 Ibs (56 kg)
89" Lx 61.5" W (227cm x 156cm)
300 Ibs (136 kg)
6
Owner'sManual
Features
Seat Adjustment
Anatomically designed seat adjusts for height and fore/aft position with locking pop pins. Adjustments accommodate various body types and allow for workout of different muscle groups.
Multi-position Handlebars
Specially designed for in and out-of-the-saddle riding. The PVC-coated bar provides a variety of hand and arm position for comfort and stability. Features a locking pop pin for height adjustments.
Resistance
Control
Knob & Emergency Brake
Turning knob increases or decreases resistance on the flywheel. Pressing down on the red emergency brake lever will stop the flywheel and pedals.
Perimeter
Weighted
Flywheel
Concentrated mass on the outer edge combined with large gear ratio creates high inertia that best replicates the real world cycling experience.
Schwinn ® Smart
Release
TM
System (Evolution ® SR model
only)
Patented design offers all the benefits of a fixed gear, essential to the Schwinn ® Cycling workout, while adding a unique
"coasting feature".
Zinc Plated
Frame
Stainless Steel Hardware
High tech, monococque (one-piece) heavy gauge steel frame. Frame is completely zinc plated prior to application of powder coat finish for maximum corrosion resistance. Stainless steel fasteners throughout also resist corrosion.
Stainless Steel Pop-Pin
Positive-lock pop pins are constructed from corrosion resistant stainless steel with plastic T-handles. Pip pins can be quicklythreaded tight for a secure hold on the sliding tubes.
Position
Numbering
Numbers are permanently stamped into the stainless steel material allowing the user to easily replicate their most comfortable riding position.
7
Owner'sManual
Operation
HOW TO USE THE SCHWINN ® EVOLUTION® BIKE
You have full control over the levels of resistance integrated into your workout. Typically, lower resistance levels enable you to move at a faster pace, placing increased demand on your cardiovascular system. Higher resistance levels will typically deliver more of a muscle/endurance workout at lower RPMs. But everyone is differen!! Experiment and find the beginning level of resistance that is comfortable for you.
Resistance adjustment
Pedaling resistance is controlled bythe resistance control knob conveniently located underneath the handlebars. To increase resistance, turn the resistance control knob clockwise (+). To decrease resistance, turn the resistance control knob counterclockwise (-). Resistance adjustments can be easily made at any time.
Emergency Brake Activation
Your Evolution ® bike features an emergency brake. If you wish to stop the flywheel rotation (and therefore the pedal rotation) quickly, simply press D0WN firmly on the brake lever that extends from the resistance adjustment knob. Continue applying pressure until the wheel has come to a complete stop.
Seat adjustment
Proper seat height helps ensure maximum exercise efficiency and comfort, while reducing the risk of injury.
Adjusting the seat forward or backward allows you to work different lower body muscle groups.
1.
Place one pedal in the upward position, then place your foot in the toe clip and center the ball of your foot over the center of the pedal. Your leg should be slightly bent atthe knee.
2.
Ifyour leg istoo straight or your foot cannottouch the pedal, you will need to move the seat down. Ifyour leg is bent too much, you will need to move the seat up.
3.
Dismount the bike and loosen the locking pop pin by turning the handle counterclockwise.
Pull out the spring-loaded knob to release the locking pin from the preset seat position hole.
4.
Raise or lower the seat to the desired position.
Do not raise the seat above the STOP mark.
5.
When the seat is in the desired position, release the spring-loaded knob, re-positioning the locking pin in the desired, preset hole. Turn the handle clockwise to tighten the knob.
6.
Try several seat heights to find the most comfortable position.
7.
Note the position number on the side of the tube for future reference.
8.
To adjustthe forward or backward seat position, dismountthe bike and loosen the locking pop pin byturning counterclockwise.
Pull out the spring-loaded release knob, releasing the locking pin from the preset position hole.
9.
Slide the seat forward or backward to the desired position.
10. When the seat is in the desired position, release the spring-loaded mechanism to re-position the locking pin into the desired, preset hole. Turn the handle clockwise to tighten the knob.
8
Owner'sManual
Operation
11. Note the position number on the side of the tube for future reference.
Handlebar
adjustment
The handlebars may be adjusted to more accurately simulate the upper body position of road cycling. Raise or lower the handlebars for a more efficient, comfortable ride.
1.
To raise or lower the handlebars, loosen the locking pop pin. Pull out the spring-loaded release knob. This releases the locking pin from the preset handlebar position hole.
2.
Raise or lower the handlebars to the desired position.
Do not raise the handlebar above the STOP mark.
3.
When the handlebars are in the desired position, release the spring-loaded knob, re-positioning the locking pin in the desired, preset hole. Turn the handle clockwise to tighten the knob.
4.
Try several handlebar settings to find the most comfortable position. Note the position number on the side of the tube for future reference.
Foot positioning/pedal strap adjustment
Place the ball of each foot in the toe clip until the front of the shoe fits snugly in the toe clip cage. Rotate one foot to within arm's reach, then tighten the webbed cloth strap of the toe clip around your shoe by pulling up on the strap. Pull up on the strap until the cage of the toe clip fits snugly around the shoe. Repeat for the other foot. Point your toes and knees directly forward to ensure maximum pedal efficiency.
Lower
body workout
Once you are in position and sitting comfortably, slowly begin pedaling, with your hands resting comfortably on the handlebars. Pedal casually and rhythmically at a low resistance level until you feel secure and comfortable.
As you feel more and more comfortable, experiment with seat positions and resistance levels.
Upper body positioning
For added enjoyment, comfort and variety during your workout, experiment with moving your hands to various positions on the handlebars.
• Do not attempt to ride this bike at high RPMs or in a standing position until you have practiced and are comfortable riding at slower RPMs.
• After exercising, turn the adjustment control knob clockwise (+)to increase tension so the pedals will not rotate freely and possibly hurt someone.
9
Owner'sManual
Operation
Dismounting the unit
WARNING! The flywheel momentum of the Schwinn ® Evolution ® Bike will keep the pedals turning even after the rider stops pedaling or the rider's feet slip off. B0 NOT ATTEMPT TO BISMOUNT THE BIKE OR REMOVE YOUR FEET
FROM THE PEBALS UNTIL BOTH THE PEBALS ANN THE FLYWHEELHAVE COMPLETELY STOPPEB. Failure to follow these instructions may lead to loss of control and serious personal injury.
There are four ways to stop the Schwinn ® Evolution ® Bike pedals.
1.
Pedal slower until you come to a complete stop.
2.
Increase the resistance by turning the resistance adjustment control clockwise until you come to a complete stop.
3.
Engage the emergency brake by pushing B0WN firmly on the emergency brake lever that extends from the resistance adjustment knob. Continue applying pressure until the wheel has come to a complete stop.
NOTE: The Schwinn ® Smart Release
TM system feature is standard on the Schwinn ® Evolution ® SR. Please verify that your exercise bike has this feature before utilizing stopping method #4.
4.
Apply back pressure to the pedals and the Smart Release
TM system will activate. Continue applying pressure until both the pedals and the flywheel come to a complete stop.
10
Owner'sManual
Maintenance
NOTE: Do not operate or store this machine in damp or wet conditions.
Dampness can cause rust.
Moving your Schwinn ® Evolution ® Bike
Make sure that the handlebar is securel V attached to the bike and that the pop pin has been turned clockwise until tight. Standing in front of the bike, grasp the handlebars at their ver V ends. Place one foot on the lower stabilizer bar and tilt the bike towards VOU.Once the bike has tilted enough to engage the transport wheel, VOUwill be able to easil V roll the bike in an V direction. Be gentle while moving the bike as anV sudden impact mav affect the operation of the machine.
Leveling
the
unit
The Schwinn ® Evolution ® Bike can be leveled to compensate for uneven surfaces. To level the bike, raise or lower the four leveling bolts located on the underside of the legs using an adjustable wrench.
11
Owner'sManual
Maintenance
Maintenance schedule
Daily maintenance or at the end of each workout
• Release the brake resistance so that the brake pads do not contact the flywheel.
• Clean the bike with Schwinn ®equipment polish and a clean damp cloth.
• Remove the handlebars from the head tube to allow the handlebar tube and sleeve to dry.
Weekly maintenance
Monthly maintenance
IMPORTANT! To avoid damaging the finish on your Schwinn ® IC Bike, never use a petroleum-based solvent when cleaning.
• Inspectthe Schwinn ® Indoor Cycling bike for loose parts, nuts, bolts, etc. Pay special attention to the brake assembly, seat and handlebar pop-pins. This will prolong the service life of the product.
• Lubricate drive chain with bicycle lubricant containing PTFE (Teflon®). Put the lubricant through the hole in the top of the chainguard.
• Lubricate seat post and handlebars with Schwinn ® Fit Tech ® silicon lubricant to ensure smooth operation.
• Make sure handlebar and seat pop-pins are fully tightened and operating smoothly.
• Inspect toe clips and toe straps for anysigns of wear or rough movement.
Replace the components if any signs of wear are noticed.
• Check that both pedals are secured and properly attached to the crank arms.
Inspect pedals by rotating the pedals by hand, if any rough movement or noise is observed replace the pedals immediately.
NOTE: Onlytrained personnel should change the pedals. Unqualified people performing this procedure can cause threads to cross. Crossed threads do not qualify for warranty replacement.
• Check the chain for proper adjustment. Move the crank arms back and forth.
If there is more than 1/4" (0.64 cm) movement in the crank before the flywheel turns, tighten the Chain. (See Chain Adjustment instructions.)
NOTE: Make sure you adjust both sides equally so that the flywheel remains in alignment with the frame.
• Check the crank bolts with a torque wrench. The torque should not exceed
360 Ibf/in (40.67 Nm)for IC Pro
TM and IC Elite
TM and 420 Ibf/in (47.45 Nm)for the
Evolution ® models.
In order to ensure proper function and safety, use only genuine Schwinn ® IC replacement parts supplied by Nautilus.
12
Owner's Manual
Maintenance
Chain adjustment
The chain on your Schwinn ® Evolution ® Bike has been factory set and lubricated. It should not require any immediate attention. Over time however you may need to make minor tension adjustments.
1. With an adjustable wrench, loosen the two bolts (A) on either side of the flywheel.
2. Tighten the two smaller nuts (B) which go through the frame tube evenly by turning clockwise until there is approximately 1/4" (0.64 cm) of slack in the chain.
3. Tighten the two larger nuts (A) on the sides of the flywheel.
NOTE: Make sure you adjust both sides equally so thatthe flywheel remains in alignment with the frame.
For more information, see the Schwinn ® IC Service Manual or consult a certified Nautilus technician for assistance.
13
Owner's Manua/
Limited Warranty
All Schwinn_ exercise products are warranted to the retail purchaser to be free from defects in materials and workmanship. Warranty coverage valid to the original purchaser only and proof of purchase will be required. Any product sold or placed in an application not recommended by Nautilus, Inc. will void any warranty coverage set forth by Schwinnc_Fitness warranty policies and procedures.
TIME PERIOD
Residential Environment:
Commercial Environment:
This warranty excludes wear items that need to be replaced due to normal wear and tear.
THIS WARRANTYDOESNOT COVER
1. Any component on original equipment which carries a separate consumer warranty of the parts supplier.
2. Normal wear and tear.
3. Any damage, failure or loss caused by accident, misuse, neglect, abuse, improper assembly,improper maintenance, or failure to follow instructions or warnings in the Owner's Manual.
4. Use of products in a manner or environment for which they were not designed.
LIMITATIONS
The foregoing warranties are in lieu of and exclude all other warranties not expressly set forth herein, whether express or implied by operation of law or otherwise, including, but not limited to, warranties of merchantability or fitness for a particular purpose. Nautilus,
Inc. shall in no event be liable for incidental or consequential losses, damages or expenses in connection with its exercise products.
Nautilus, Inc.'s liability hereunder is expressly limited to the replacement of goods not complying with this warranty or, at Nautilus,
Inc.'s election, to the repayment of an amount of the purchase price of the exercise product in question. Some states do not permit the exclusion or limitation of implied warranties or incidental or consequential damages,so the preceding limitations and exclusions may not apply to you.
PROCEDURES
Warranty service will be performed by Nautilus, Inc. or an authorized Schwinn _ Fitness Dealer. The original purchaser must provide proof of purchase. Service calls and/or transportation to and from the Authorized Schwinn c_Dealer is the responsibility of the purchaser.
1. Nautilus, Inc. will have the option to repair or replace any exercise product(s), which require warranty service.
2. Nautilus, Inc. will replace any equipment frarne that is structurally defective with a newframe or replace the unit with a unit of equal value. Nautilus, Inc. is not responsible for labor charges in replacing defective frames.
3. In the event a product cannot be repaired, Nautilus, Inc. will apply a limited credit reimbursement toward another Schwinnc_ exercise product of equal or greater value.
4. Nautilus, Inc. is not responsible for dealer labor charges for component changeovers completed after the labor-related warranty period(s) stated herein.
5. If you electto repair an exercise product or part yourself, using the services of someone other than Nautilus, Inc. or an Authorized
Schwinn _ Fitness Dealer, or use a replacement part not supplied by Nautilus, Inc., Nautilus, Inc. shall not be liable for any cost, damage, failure or loss caused bythe use of such unauthorized service or parts.
6. See your Authorized Schwinn _ Fitness Dealer for service or write to:
Nautilus, Inc.
16400SE Nautilus Drive
Vancouver, Washington, USA 98683
Or call 1-800-NAUTILUS(628-8458)for assistance or questions.
14
Owner's Manual
Contact Numbers
@ 8ES THE UNITED STATES:
E-maih [email protected]
TECHNICAL/CUSTOMER SERVICE
Phone: 800-NAUTILUS (800-628-8458)
Fax: (877) 686-6466
E-mail: [email protected]
CORPORATE HEADQUARTERS
Nautilus, Inc.
World Headquarters
16400 SE Nautilus Drive
Vancouver, Washington, USA 98683
Phone: (800) NAUTILUS (800) 628-8458
Please supply the serial number of your machine and the date of purchase when you call Nautilus. Use the space in the boxes below to write down this information. To find the serial number on your machine, refer to the Safety Warning Label information page. Dial the number of the office close to you.
NTEBNAT ONAL 0 8ES:
For technical assistance and a list of distributors in your area, please call or fax one of the following numbers.
INTERNATIONAL CUSTOMER SERVICE
Nautilus International S.A.
Rue Jean Prouve
1762 Givisiez / Switzerland
Tel: (41) (26) 460 77 77
Fax: (41) (26) 460 77 70
E-mail: [email protected]
GERMANY and AUSTRIA
Nautilus Deutschland GmbH
Albin-K6bis-Str. 4
51147 K61n
Tel.: (49) 02203 2020 0
Fax: (49) 02203 2020 45 45
ITALY
Nautilus Italy S.r.l., Via della Mercanzia, 103
40050 Funo di Argelato - Bologna
Tel: (39) 051 664 6201
Fax: (39) 051 664 7461
SWlTZE RLAN D
Nautilus Switzerland SA
Rue Jean-Prouve 6,
CH-1762 Givisiez
Tel: (41)0264607766
Fax: (41) 026 460 77 60
UNITED KINGDOM
Nautilus UK Ltd
Nautilus UK, 4 Vincent Avenue,
Crownhill, Milton Keynes, Bucks, MK8 0AB
Tel: (44) 1908 267 345
Fax: (44) 1908 567 346
CHINA
Nautilus Representative Office
Nautilus, Shanghai, 7A No.728, Yan'an Rd(West)
200050 Shanghai, China
Tel: (86) 21 523 707 00
Fax: (86) 21 523 707 09
15
Owner's Manual
SCHWlNN
FITNESS
©2007. Nautilus, Inc. All rights reserved. Nautilus, the Nautilus Logo, Universal, Bowflex, StairMaster, Pearl Izumi, Nautilus Institute, Evolution and Smart Release are either registered trademarks or trademarks of Nautilus, Inc. Schwinn and the Schwinn Quality Seal are registered trademarks. All other trademarks are owned by their respective companies. Nautilus, Inc., World
Headquarters, 16400SE Nautilus Drive, Vancouver, WA 98683 I-8OO-NAUTEUS www.nautilus.com
Printed in China
Nautilus
Bowflex ® Schwinn ® Fitness Pearl Izumi® StairMaster ® Universal ® Nautilus Institute ®
Public link updated
The public link to your chat has been updated.
Advertisement