Advertisement
Advertisement
13-INCH COLOR TV/VCR
SRC413AC
S
SYLVANIA
WARNING:
OR THEMOISTURE.
SHOCK, DO NOT EXPOSE THIS APPLIANCE
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SJ, _'4OCK, DO NOT REMOVE COVER (OR BACK).
NO
USE "R SERVICEABLE PARTS INSIDE.
REFER
SER_
NEL.
'ICING
TO QUALIFIED SERVICE PERSON-
The caution ma.
rking is located on the rear of the cabinet.
'MPORTANT
THIS SYMBOL INDICATES THAT DAN-
GEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE
ARE
IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS
LITERATURE ACCOMPANYING
PLIANCE.
IN THE
THE AP-
SAFEGUARDS
1.Read
instructions-All
the
safety
and operating instructions should be read before t he appliance is operated.
2.Retain
Instructions-The sai should be retained for future ety and operating instructions reference.
3 Heed Warnings-All warnings
• .
on the app iance and n the operating instmctlons should be at,, '_"wed to.
4.Follow
Instructions-All should be followed.
operating and u.
_- instructions
5.Cleaning-Unplug
TV/VCR from the wall outlet beto_,.
cleaning.
Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
EXCEPTION
: Aproductthat is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.
6.Attachments-Do not use attachments not recommended by the TVNCR manufacturer as they may cause hazards.
7.Water
and. Moisture-Do not use this TV/VCR near waterfor example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
8.Accessories-Do not place this TVNCR on an unstable cart, stand, tripod, bracket, or table. The TVt a'''v_, m_y fall, causing serious injury to someone, and se =riou_lamage to the appliance.
Use only with a cart, star _d, trip_, bracket, or table recommended manufacturer, or sold by with the the
TVNCR.
Any mounting of the appliance manufacturer's should follow the instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
9.Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/VCR and to protect it from overheating, and these openings must not be blocked or covered.
The openings should never be blocked by placing the
TV/VCR on a bed, sofa, rug, or other similar surface. This
TV/VCR should never be placed near or over a radiator or
_. heat register.
This TV/VCR should not be placed in a prol_ilt-in installation such as a bookcase or rack unless structioff, ventilation is provided or the manufacturer's in-
10.Power
Sod, have been adhered to.
from the type'_Ces-This TV/VCR should be operated only label.
If you are 9f power source indicated on the marking your home, consultq.ot
sure of the type of power supply to company.
For TV/VCRg ''r _appliance dealer or local power power, or other sources, retc_ i?'_ded to operate from battery ll.Grounding
or Polarization-This q_operating instructions.
withapolarizedaltemating-currentlineptu'yCR is equipped one blade wider than the other). This plug wilflplug having power outlet only one way. This is a safety featur_t int_o the are unable to insert the plug fully into the outlet, try "q reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12.Power-Cord
Protection-Power-supply
cords should be routed so that they are not likely to be walked on or pinched by items placed uoon or a_,ainst them, paying particular attention * " receptacles, and the poiW
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
LEAD tN
WIRE
GROUND
CLAMP_
ANTENNA
DISCHARGE
UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
NEC - NATIONAL ELECTRICAL CODE
GROUNDING
(NEC SECTION
CONDUCTORS
810-21)
GROUNDCLAMPS
POWER SERVICE
ELECTRODE
GROUNDING
SYSTEM
(NEC
ART
250, PART H)
$2898A
13.Outdoor
Antenna grounding-If
an outside antenna or
cable
system
is connected
to the TV/VCR, be sure the
antenna or cable system is grounded so as to provide some protection
against
voltage surges and built-up static charges.
Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wiEe to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
(Fig. A)
14.Lightning-For added protection for this TV/VCR receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/VCR due to lightning and power-line surges.
15.Power
Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
16.Overloading-Do
not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
17.Object
and Liquid
Entry-Never
push objects of any kind into this TV/VCR through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the TV/VCR.
18.Servicing-Do not attempt to service this TV/VCR yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
19.Damage
Requiring
Service-Unplug this TVNCR from the wall outlet and refer servicing to qualified service personnel under the following conditions: a.
When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the
TV/VCR.
c.
If the TV/VCR has been exposed to rain or water.
d. If the TV/VCR does not operate normally by fbllowing the operating instructions.
Adjust
only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/VCR to its normal operation.
e.
If the TV/VCR has been dropped or damaged in any way.
f.
When the TV/VCR exhibits a distinct change in performance-this indicates a need for service.
20.Replacement
Parts-When
replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.
21.Safety
Check-Upon
completion of any service or repairs to this TV/VCR, ask the service technician to perform routine safety checks to determine that the TV/VCR is in proper operating condition.
22.Heat-This TV/VCR product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
- 3 EN
8H30
p
RECAUTIONS
7
For safe operation and satisfactory performance of your
TV/VCR, keep the following in mind when selecting a place for its installation:
•
Shield it from direct sunlight and keep it away from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper heat dissipation.
Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes,
• Install unit in a horizontal position.
•
Avoid locations subject to strong vibration.
• Do not place the TV/VCR near strong magnetic fields.
• Avoid moving TV/VCR to locations where temperature differences are extreme.
IMPORTANT COPYRIGHT
INFORMATION
Unauthorized recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws.
We assume no responsibility for the unauthorized duplication, use, or other acts which infringe upon the rights of copyright owners.
FCC WARNINGor use radio frequency energy.
Changes or modifications to this equipment
may cause harmful
interference approved could lose the authority if an unauthorized made.
unless
This equipment
the modifications in the instruction
may generate
are expressly manual.
The user to operate this equipment change or modification is
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our
Authorized Service Center for servicing.
• Do not put your fingers or objects into the TV/VCR cassette holder.
•
Do not place anything directly on top of the unit.
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. If a tape is played in a TV/VCR which has moisture, it may damage the tape and TV/VCR.
Therefore when the condensation occurs inside the unit, turn the POWER button on and allow at least 2 hours for the unit to dry out.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in ac- cordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect technician the equipment for help.
into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV
The serial number of this product may be found on the back of the unit. No other TV/VCR has the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
- 4 EN
9Eli
TABLE OF CONTENTS
• IMPORTANTSAFEGUARDS
• PRECAUTIONS
LOCATION
............................
...................................................
..........................................................
AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE .............................................
WARNING ...........................................................
2
4
4
4
4
• PLAYBACK
........................................................
NORMAL PLAYBACK
....................................
TRACKING ADJUSTMENT
............................
SLOW MOTION ................................................
PICTURE SEARCH ...........................................
STILL PICTURE ................................................
21
2 I
VERTICAL HOLD CONTROL
........................
21
21
21
21
21
• FEATURES
..........................................................
6
• SUPPLIED
ACCESSORIES
...............................
6
• SPECIAL
PLAYBACK
.......................................
RENTAL
PLAYBACK
......................................
AUTO REPEAT
PLAYBACK
..........................
•
VIDEO CASSETTE
.............................................
7
• OPERATING
CONTROLSAND FUNCTIONS 8
• PREPARATION
FOR USE ...............................
10
ANTENNA/CABLE CONNECTIONS
.............
l0
INSTALLING THE BATTERIES
.....................
I 1
EXTERNAL INPUT MODE ..............................
1 l
• SEARCH
.............................................................
ZERO RETURN .................................................
TIME SEARCH ..................................................
INDEX SEARCH
..............................................
• SET UP FOR USE .............................................
12
CHANNEL SET UP FOR THE FIRST TIME .. 12
DELETING
(OR ADDING)
CHANNEL
.........
12
CHANNEL
SET UP AGAIN .............................
13
SELECTING
THE LANGUAGE ......................
13
DAYLIGHT-SAVING
TIME ............................
13
CLOCK SET UP (AUTO / MANUAL)
.............
14
• RECORDING
.....................................................
NORMAL RECORDING
..................................
SKIPPING
RECORDING
UNWANTED
.....................................................
OTR (One Touch Recording)
SCENES DURING
.............................
COPYING A VIDEO CASSETTE
(Requires a VCR or camcorder) .........................
25
25
25
26
26
ION
SCREEN DISPLA
AUTO REWIND-EJECT
Y. ....................................
• SPECIAL
FEATURES
......................................
DEGAUSSING ...................................................
REAL TIME TAPE COUNTER ........................
...................................
16
16
16
16
16
•
TIMER ................................................................
27
AUTOMATIC
TIMER RECORDING ..............
27
TIMER PROGRAM
EXTENSION ...................
28
HINTS FOR AUTOMATIC TIMER
RECORDING .....................................................
29
AUTO RETURN ................................................
29
WAKE UP TIMER .............................................
SLEEP TIMER ...................................................
29
30
• TVOPERATION
................................................
17
WATCHING A TV PROGRAM .......................
17
GAME MODE ....................................................
PICTURE CONTROL
........................................
17
17
CLOSED CAPTION SYSTEM
.........................
V-CHIP SET UP .................................................
18
19
• MAINTENANCE
•
...............................................
TROUBLESHOOTING
• SPECIFICATIONS
• CABLE
CHANNEL
GUIDE
.......................
............................................
DESIGNATIONS
............
30
31
32
32
•
WARRANTY
........................................
Back Cover
ANOTEABOUTRECYCLING
This product's packaging materials are recyclable and can be reused.
Please dispose of any materials in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
23
23
23
24
22
22
22
- 5 EN
01_ I
I
FEATUR
E
,_
• Rotary 4-head Record/Playback System-Four
heads ensure excellent picture quality and special effects playback.
• Index Search-
Fast-forwards to start of next recording.
• Slow Motion- View recorded program at slower than norreal speed. Control the playback speed slowness by press ing the F.FWD
button to go faster, or the REW button to go slower.
• Infrared remote control
•
Bilingual on screen menu display selectable in English or Spanish
•
Realtime counter-This
shows the elapsed recording or playback time in hours, minutes, and seconds.
The "-" indication will appear when the tape is rewound further than the tape counter position "0:00:(X)".
• 181 channelcapebility
PLL frequency synthesizer tuner
with direct station call- (A converter may be necessaryto view scrambled cable channels.)
• Auto Clock Setting-Allows from a PBS broadcast station.
you to set the clock function
• Closed caption system-
You may view specially labeled
(cc) TV programs,
movies, news, prerecorded
tapes, etc.
with either a dialogue caption or text display
added to the
program.
• Game mode-
Automatically
sets external input mode and allows TV/VCR display to be suitable for use with TV games.
• Auto power on and off system-
Automatically turns on the TV/VCR when you insert the cassette, turns off after auto-rewind, and ejects when the beginning of the tape is reached.
• Auto rewind when the end of a tape is reached-T h i s function doesn't occur when using timer recording.
• 2 Step picture search operation-You can view a video program at a high speed or super high speed in either a forward or reverse direction in LP and SLP mode.
For SP mode only high speed.
• Three different playback tape speeds : SP/LP/SLP
• Two different recording tape speeds : SP/SLP
• Zero Return-The tape returns to counter of 0:00:00 by rewinding or fast lbrwarding.
•
Still-"Freeze"
the picture atany time, fur close viewing of a particular scene.
• Digital Auto Tracking
(DTR)-Autumatically
tracking for each tape you play.
adjusts the
• Rental play modehnproves playback picture quality from worn tapes, such as rental tapes.
•
Auto repeat-Allows
you to repeat the playing of a tape indefinitely without pressiug the PLAY betton.
•
Time search-
Let you set the TV/VCR to advance the tape by entering the desired playback time you want to skip.
• OTR (One Touch
Recording)-lnstant
timed recording from 30 to 480 minutes is possible at the push of the
REC/OTR button.
• 1 Year, 8 events (including Daily and Weekly Timer Re-
cording)--The
built-in timer allows you to record up to 8 programs at different times on different channels up to I year in advance.
The Daily timer allows recordings to be made of daily broadcasts, and the Weekly timer allows recording to be made once a week up to the end of the tape.
• Auto return-After timer recording is finished, the TV/VCR can return to the beginning of the recording.
• Wake uplSleep
timer-Allows
you to have the TV/VCR automatically turn on or off at a desired time.
• Timer Program Extension-Allow you to shift the time schedule for automatic timer recording.
• Auto Head Cleaner-Automatically you insert or remove a cassette.
cleans video heads as
• V-CHIP-Enables parents to prevent their children from watching inappropriate material on TV.
SUPPLIED
ACCESSORIES
Remote Control Unit
I i
2 AA Batteries Rod Antenna
I ! PART NO.
: (N0279UD)
u_..-/"
PART NO.
(0EMN00673)
If you need to replace these accessories, please refer to the PART NO. under the illustrations and call 1-800-968-3429.
• Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators (Splitter).
Contact your local electronics store for these items.
• We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, plea_ call the manufacturer of the universal remote control,
- 6 EN
(717,1!
VIDEO CASSETTE
This TV/VCR will operate with any cassette that has the _ mark.
For best results, we recommend the use of high-quality tapes.
Do not use poor quality or damaged tapes.
I'RECA
U 770NS
• Avoid moisture.
Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa.
Before using a tape with these conditions, to avoid damage of the tape and your
TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated.
• Avoid extreme heat, high humidity and magnetic fields.
• Do not tamper with the cassette mechanism.
• Do not touch the tape with your fingers.
INSERTING
A CASSETTE
Insert the cassette in the direction as shown.
Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR.
The TV/VCR will automatically turn on.
:IK
CORRECT
•
WRONG h
TWO DIFFERENT TAPE
SPEEDS
Before recording, select the tape speed from : SP mode
(Standard Play) or SLP mode (Super Long Play).
The table below shows the maximum recording/playback time using T60, TI20 or T160 tapes in each mode.
Tape Speed
Recording/Playback
T60 T120
Time
TI60
.Type of tape
SP mode
1 hour 2 hours 2-2/3 hours
SLP mode
3 hours 6 hours 8 hours
Note: You can play back a tape recorded in LP mode
(Long Play).
REMOVING A CASSETTE
1) In the Stop mode, press the STOP/EJECT button on the TV/VCR.
The cassette wilt eject.
2) Pull the cassette out of the cassette compartment.
3) Store the cassette in its case as shown.
ERASE
PREVENTION
You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette.
Tab
If you decide to record on the tape again, cover the hole with plastic tape.
Transparent Tape
- 7 EN
OEI I
OPERATING CONTROLS AND FUNCTIONS
NOTE:
• We do not recommend the use of universal remote controls.
Not all of the functions may be controlled with a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, please call the manufacturer of the universal remote control.
TV/VCR FRONT PANEL - [Fig.l]
- REMOTE CONTROL - [Fig.2]
13--
15--
16--
17
5--
4
8--
18--
19--
2O
POWER
--CS)
"Q
1
RECORD
-CD
2 3 4 5 6 78910
WAKE*UP _
/SLEEP
C3
25
--24
O Q qD O_-
--11
DISPLAY MUTE (_
:
--12
23
6
•
SPEED PAb_JSTLk
SI_ON
--22
--21
11 12 13 14
1 EARPHONE jack- Connects to earphones (not supplied) for personal listening.
The size of jack is
1/8" monaural (3.5mm).
2
AUDIO input jack-
Connect to the audio output jack
of your audio equipment,
video camera or another
VCR.
3
VIDEO input jack-
Connect to the video output jack of your video camera or another VCR.
4 STOP button -Press to stop the tape motion.
EJECT button-Press in the Stop mode to remove tape from TV/VCR.
(only on the TV/VCR)
• button-
• Press to select setting modes from the on screen menu.
• Press to enter digits when setting program.
(for example: setting clock or timer program)
5 REW buttonPress to rewind the tape, orto view the picture rapidly in reverse during playback mode.
(Rewind Search)
<1 button-
• Press to select a mode from a particular menu.
(for example: LANGUAGE or USER'S SET UP)
6 PLAY button-
Press to begin playback.
• button-
• Press to select setting
modes
from the on screen menu.
• Press to enter digits when setting program.
(for example: setting clock or timer program)
- 8 EN
9El I
- REAR VIEW - [Fig.3]
©
7 F.FWD button- Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. (Forward Search)
I_ button-
• When setting program (for example: setting clock or timer program), press to determine your selection and proceed to the next step you want to input.
• Press to determine setting modes from on screen menu.
• Press to select a mode from a particular
menu.
(for example: LANGUAGE
or USER'S
SET UP)
8 REC button-
Press for manual recording.
OTR button-Activates
(only on the TV/VCR)
One
Touch Recording.
9
RECORD indicator-
Flashes during recording.
Lights up in the Stand-by mode for Timer Recording.
10 Remote
Sensor Window-
Receives the infrared signals from the remote control.
11 CHANNEL • / •
buttons-
Press to select the desired channels for viewing or recording.
TRACKING function-Press
to minimize video
'noise' (lines or dots on screen) during playback or slow mode. (See page 21.)
12 VOLUMEA /v
buttons-
Adjust the volume level.
13 POWER button- Press to turn TV/VCR on and off.
Press to activate timer recording.
14
Cassette compartment
15
Number buttons-
Press to select desired channels for viewing or recording.
To select channels from l to 9, first press the 0 button and then I to 9.
+100 button- When selecting cable channels which are higher than 99, press this button first, then press the last two digits. (To select channel 125, first press the "+ 100" button then press "2" and "5").
27
16
MENU button-
Press to display the main menu on the TV screen.
17
DISPLAY button-
Display the counter or the current channel number and current time on the TV screen.
(See page 16)
18 SPEED button- Press to choose the desired recording speed:SP/SLP.
19 T-PROG. CLEAR button-Press to cancel a setting of timer program (See page 28).
COUNTER RESET button-
Press to reset counter to
0:00:00.
20
GAME button-
Sets the game mode and external input mode at the same time. (See page 17.)
21
SLOW button-
Press to start slow motion playback.
The slow speed can be controlled by pressing the
F.FWD
button (faster) or the REW button (slower).
(only on the remote control)
22
PAUSE/STILL button-
Press to temporarily stop the tape during the recording or to view a still picture during playback.
Frame Advance
function-Press to advance the picture one frame at a time during Still mode.
23
MUTE button-
Mutes the sound.
Press it again to resume sound.
24
CHANNEL RETURN button-Press
to go back to the previously viewed channel.
For example, pressing this button once will change channel display from 3 (present channel) to 10 (previously viewed channel), and pressing it a second time will return from 10 to 3.
25
WAKE UP/SLEEP button-Sets
the Wake up or
Sleep Timer. (See page 29.)
26 Power cord- Connect to a standard AC outlet
(120V/60Hz).
27 ANT. terminal- Connect to an antenna or cable system.
-9EN
PREPARATION
FOR USE
VItF/UtlF
SEI_I
RATE
AA 7 ENNA
S
In some areas it will be necessary to use an outdoor antenna.
VHF/UHF
COMBINED ANTENNA
VHF Antenna (Not supplied)
The VHF/UHF Rod Antenna
(supplied)
is detachable.
Insert the stem of the antenna into the hole on the upper-back portion of the TV/VCR.
Connect the VHF/UHF Rod Antenna or VHF/UHF
Combination Antenna to the ANT.
terminal of the
TV/VCR as shown in the diagram below.
For the best reception, fully extend the VHF/UHF Rod
Antenna and make the necessary adjustments.
(Avoid touching the top section when adjusting.)
ANT.
NOTE
:
Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into antenna terminal.
CABLE WITWOUT
DESCRAMBLER
Flat twin-lead cable
[Fig.5]
CONVERTEIU
BOX
Bent pin
Cable
(Needs
Plug
to be straightened)
(Supplied)
I Rod Antenna
1
(Straight
pin)
VHF/UHF Antenna
(Not supplied)
Use this connection if your cable system connects directly to your TV/VCR without a converter box.
By using this connection you can:
1) Use the TV/VCR remote to select channels
2) Program one or more unscrambled channels for
Automatic
Timer Recording.
NOTE: This unit will ONLY record and view the same channel.
From Cable System
75-ohm Coaxial
Cable (Not supplied)
[Fig.4]
NOTE:
The connection of an indoor antenna may not always give acceptable TV reception.
i,
T
ANT.
©
[Fig.6]
Note to CATVsysteminstaller:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
Antenna/Cable Connections Continued on the Next Page.
- I0EN
CABI,E WITH CONVERTER/
DESCRAMBLER BOX OR SA TELIJTE
BOX
If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here.
By using this connection you can also record scrambled channels.
However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/VCR Remote
Control.
Unattended timer recording is limited to one channel at a time.
1) Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.
3) Replace the cover.
_ Satellite Box or
Cable Box (Not supplied)
From Cable System or Satellite Dish
75-ohm Coaxial
Cable
(Not supplied)
ANT.
©
When using an external input signal (another VCR or video camera), connect the player's audio/video output cables to the AUDIO IN/VIDEO IN jacks of your
TV/VCR.
Then press the CHANNEL • or • button until "AUX" appears on the screen.
AUX
[Fig.7]
TO RECORD A SCRAMBLED/UNSCRAMBLED
CHANNEL
1. Set the TV/VCR channel selector to the output
channel of the Cable Converter
Box or Satellite Box.
(Ex. CH3)
2. Select the channel to record from your Cable
Converter Box or Satellite
Box.
- 11 EN
9Eli
S UP FOR USE
You can program the tuner to scan all the channels you receive in your area. You must use the remote
control
for the this procedure.
NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.
1 Pug ntheTVfVCR p w.
L)ii
The channels you no longer receive or seldom watch can be deleted from the memory.
(Of course, you can add the deleted channel into the memory again.)
Plug the TV/VCR power cord into a standard AC outlet.
1
Select CHANNELSE3
2
Turn _,n the TV/VCR
Press the MENU button.
Press the PLAY/• or STOP/•
Press the POWER button to turn on the
TV/VCR.
button to point to "CHANNEL
3
Select "ENGLISH" or "ESPAI_IOL"
ESPANOL guage.
SET UP".
Then, press the EFWD/I_ button.
,,.. .....
'FiF_' Dnd'_icate the selected lan-
2
SeJect ADD/DELETE CH"
Press the PLAY/• or STOP/•
DELETE CH".
UP f
(
I_
..........
T_MER pROGRAMMtNG
PICTURE CONTROL
SE_ING CLOCK
CHANNEL SET
Up
USERS
S£T UP
V CHIP SEX Up
LANGUAGE
CAPTION
[ENGLISH]
I
TIME SEA_tCH
INdeX $_ARCH
_._,,[_
_ET tip J
4
Begin auto preset
(
....
[,,oo.o_._c._, button to point to "AUTO
Press the PLAY/• or STOP/V
_,o_._,
[, t%%%Y_0,_o_
Then press the EFWD/II_ button.
The tuner scans and memorizes all active channels in your area.
NOTES:
3
Enter the desired channel number
Press the PLAY/• or STOP/• button until your desired channel number appears.
(You can also use the number buttons or the
CHANNEL •/• button to enter it) (Example: CH8)
_o0_
08
• The TV/VCR distinguishes between standard TV channels and cable channels.
• If you want to play or record a video tape BEFORE presetting the tuner, you must press the MENU button.
To preset the tuner again, see "CHANNEL
SET UP AGAIN" on page 13.
....
, ....
....
.
< .....
5
After scanning
4
Delete (or add) it from (into) memory
Press the EFWD/I_ or REW/<I button.
The channel number changes to light red. The channel is deleted from memory.
• To delete another channel, repeat steps [3] and [4].
• If you press the F.FWD/I_ or REW/<I button again, the channel is memorized again.
The tuner stops on the lowest memorized channel.
If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or CHANNEL • or !v.
Added channel: Light blue.
Deleted channel: Light red.
5
Exit the channel setup mode
Press the MENU button to returns to TV mode.
NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL • or • button.
- 12EN
9Ell
Make sure
...
• Press the POWER button to turn on the TV/VCR.
• You must use the remote control ['orthe following steps.
NOTE:
If for some reason the menu is in Spanish, press i the MENU button, press the PLAY/A button to point to
"IDIOMA [ESPANOL]", then press the EFWD/_ button, then press the MENU button.
f Seiect 'CHANNEL SET UP"
Press the MENU buttou.
Press the PLAY/A or STOP/V button to point to "CHANNEL
SET UP".
Then, press the EFWD,_ ,_ button.
2
Bejri aulo pre:set
.
CHANNEL
V.¢NBP SET UP
Z_RO _ETU_N
TiME SEARCH tNDE× S_A_¢_
TIMER p_OZIRAMMiNG pICTURE
CONTROL
$£_tNG CLOCK
CHANNEL _ET UP
tJSEWS SET UP
.....
t.ANGUAG£
IENGUSHI
Select this feature and the TV/VCR's clock automatically will advance one hour in April, then reverse one hour in October.
When Daylight-Saving Time is ON, the clock will change automatically as fbllows:
•
First Sunday
of April :At 2 AM the clock immedi-
ately changes to 3 AM. Any timer programming you
have set to occur between 2 AM and 3 AM will not record.
SE_
UT'
............
{TV)
_0_o,._,
• Last Sunday of October : At 2 AM the clock immediately changes to 1 AM.
Press the PLAY/& or STOP/V button to point to "AUTO
PRESET".
Then, press the EFWD_.
button.
The tuner scans and memorizes all the active channels
in your area.
Make
sure
...
• Press the POWER button to turn on the TV/VCR.
• You must use the remote control for the following steps.
3
After scamping
The tuner stops on the lowest memorized channel.
_ Select 'SETTING CLOCK"
(
Press the MENU button.
Press the PLAY/& or STOP/Y button to point to "SETTING
CLOCK"
-
_,_,,,o_,_M.,,_
Make
sure...
• Press the POWER button to turn on the TV/VCR.
•
You must use the remote control for the following steps.
NOTE: This function effects only the language on the screen menu and not the audio source.
Then, press the EFWD/_ button.
U£ER$ SE'r Up
E_IGUSH]
,4 EtqU
ZERO ......
TIMESEARCH tNOE× SEA_,t:H
I
Select "LANGUAGE"
Press the MENU button.
Press the PLAY/& or STOP/Y button
GUAGE".
to point to "LANt
TIMER pROGOAMM,NG
PICTURE C_TRO.
SE_ING
CLO_K
CHAt4NEt. SET t)P
USER, S SE,r U¢,
V ¢HPP SET |
CAPT_C_ MENUI
TIME S£ARCH
IND.×
SEARCH
2
Set "D.S.T." (Daylight-Saving Time) to [ON] button to point to "D.S.T.".
Then,
press the F.FWD/I_or
REW/'_I button until [ON] ap- pears.
AklTO eX._K
AUTOCLO_K¢H
1_:_II
[%/
I,-
_ANU_L CLOCK S_T
[18 T
2
Select "ENGLISH" or "ESPAIqOL"
Select "ENGLISH" or "ESPANOL"= Spanish using the
F.FWD/I_ or REW/'_I button.
3
Exit the Daylight-Saving Time mode
Pressthe MENU button to return to TV mode.
7"0 (_'1NCEL
THE
DA YLIGHT-SA VING
TIME
3
E×il the Language mode
Press the MENU button to return to TV mode.
Repeat steps [I] to [2], select [OFF] using the
EFWD/I_ or REW/'_I button.
- 13EN
OF I I
2
Set "AUTO CLOCK" to
AUTO CL(_L;K CH
,,I,,
......
............
o_T _o_
Set the clock accurately for proper automatic timer recording.
If the Public Broadcasting Station (PBS) is available in your area, follow "AUTO CLOCK
SETTING".
If it is not, follow "MANUAL CLOCK
SETTING".
Press the F.FWD/II_ or REW/<I button repeatedly until [ON] appears.
A UTO CLOCK SETTING
You can have the TV/VCR set the clock automatically by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TV/VCR will automatically monitor the correct time and date being broadcast by the
PBS station in your area, using a new service called
Extended Data Service (XDS).
Make sure
...
• Use the remote
control for this procedure.
• TV/VCR power must be turned on.
• Confirm that the antenna connections are correct.
• The cable converter box must be turned on if your
TV/VCR is connected directly to it. (See NOTES:)
• The channel is properly set in advance.
(See page 13.)
3
Enter the chan_el oomber for the
PBS st_tior_
Press the PLAY/& or STOP/V button to point to "AUTO
CLOCK CH".
SETTING
CLO_K
_UTO CLOCK _. [0_1#
Then press the F.FWD/I_ or
REW/'_ button until the channel number for your local PBS station appears.
M_NUAL ¢LCCK SET
DST
lOFt]
If you do not know the PBS channel number, leave it set to [AUTO] which is located before [2]. The TV/VCR will search automatically all available channels for the local
PBS station, and will select that channel.
4
Exit the Auto Ciock Setting
Press the MENU button to return to TV mode.
5
Turn off the TV/VCR
Turn the TV/VCR off. Because the Auto Clock functions automatically while the TV/VCR is off.
NOTES:
• Auto clock setting only needs to be set once. But it can be done again if the clock's time has become incorrect for some reason.
• If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the
TV/VCR must be set to the output channel of the cable converter box or satellite box
(usually channel 3 or4), to be able to set up or correct the clock automatically.
If you do not know what your local PBS station is, then follow "Manual Clock Settings" on page 15.
The TV/VCR cannot control the channels of the cable converter box or satellite box.
lf you choose [AUTO],
the TV/VCR must search until the PBS channel is found. It must scan each channel for a couple of seconds to determine if that channel is transmitting the
XDS signal.
if the time, that is automatically set by this selected
PBS station is incorrect, it may not be your local PBS station, but one from a different time zone. Or there is a case that no channel is broadcasting the XDS signal in your area, as shown by no time. In these cases, you must manually enter the correct local PBS station, or set the clock manually and turn off the
Auto Clock Setting feature.
1
Select "SETTING CLOCK"
Press the MENU button.
Press the PLAY/& or STOP/V button to point to "SETTING
CLOCK".
Then, press the EFWD/I_ button.
I
It.
TIMER PROGRAMM,tC3
PICTURE _TgQL
SETlit,K_ Ct.OCK
CHANNEL SET UP
USER'S SET tJ?
V CHIP SET tJp
L,4,NGU_3 [
[ENC.L,SX]
ZEF;O RETURN
TIME SEARCH
INDE× S£,_F¢C H
- 14- EN
MANUAL
CLOCK
SETTING
Make sure
...
• Use the remote
control for this procedure.
• TV/VCR power must be turned on.
ht the example below, the clock is to be set to:
DATE March I st, 1999
SETTING TIME 5:40PM
6
Select th£ ho_r
1
Select _SETTtNG CLOCK'
Press the PLAY/A or STOP/V button to point to "SETTING
Press the MENU button.
Then, press the F.FWD/I_ button.
[
Press the PLAY/& or STOP/V
TIM£R PRQGRAMMING
• S_.,,OP'°'°RE°ON"O_°_O_
CHANNEL SET UP button until your desired hour appears.
(Example: 5, PM)
_°_"_'_°.,_,o_
LANGUAGE
....
E_GUSH]
......
[OIF]
ZErO _EIURN
]
Then, press the EFWD/_ button.
TIME SEAnCH
MONT_
O3
BAy
101
YEAR
MON 1999
I
H UR
,3,,
MtNU
_i_,'
#1%
€1%
]
2
Select "MANUAL CLOCK SET"
Press the PLAY/A or STOP/V _ -_[_""_
.....
7
Select tt_e ninut_
Press the PLAY/& or STOP/V appears.
(Example: 40)
MCNTH
_3
/01
DAy YEAR
......
CLOCK SET".
,
button to point to "MANUAL
t button until the desired minute
AUTO CLOCK CH
[AUTOI
MANUAL CLOCK SET
[• ,o_o_o¢* Eo,_
8
Start the clock
3
Select the month
Press the MENU button.
Press the PLAY/& or STOP/V button until your desired month
appears.
(Example: March --->03)
Then, press the EPWDA_- button.
I#_.
MANUAL ¢LCSCKSET o......
l-'?5'oJ
Although seconds are not displayed, they begin counting from
00 when you press the MENU button.
Use this feature to synchronize the clock with the correct time.
NOTE:
4Seectheday
appears.
(Example: 1st --> 01)
Then, press the EFWD/I_button.
.o........
When unplugging the AC cord or if there is a power failure for more than 30 seconds, you may have to reset the clock.
1'0 CHANGE (_'LOCK SETTING
If you want to change the clock,
5:40P
1
5
Select the year
Press the PLAY/& or STOP/V button until your desired year appears.
(Example: 1999)
Then, press the EFWD/I_button.
l) Follow steps [1] and [2].
2) Select where you want to change using the
F.FWD/I_ or REW/<I button.
MANUALOLOCKSET 1
MONTH
HOOR
OA¥
MINUTE
YE_'_
"1
3) Enter correct numbers using the PLAY/A
STOP/V button.
4) Press the MENU button to start the clock.
or
PLEASE
NOTE:
If there is no local PBS station in your area or on your cable system, select "AUTO CLOCK" and press the
EFWD/_ or REW/'<I button to turn [OFF] this function. Then you can manually adjust the clock.
- 15 EN
9Eli
ON SCREEN
DISPLAY
To check the Counter.
Clock and Channel number on the TV screen, press the DISPLAY button on the remote control.
Each time you press the DISPLAY button on the remote control, the TV screen will change as follows:
When
the Closed Caption mode is OFF: When the Closed
(.?tption
mode is ON:
• Counter mode: After 5 seconds, only the counter remains.
To clear it, press the DISPLAY button.
• Clock mode: After 5 se_:onds, only the clock and the channel number remain.
To clear them, press the DIS-
PLAY button.
OFF mode Counter
mode
Clock mode
• The On Screen Display disappear after 5 seconds.
• This is true even if the MUTE button is pressed, or the PAUSE/STILL button is pressed while recording.
OFF mode
Clock/Counter mode
StOP
_sP COUNT 0_234
After5 seconds -,_ After 5 seconds
T
COU_T01_
Counter remains
....
!
'%'_]
Clock & Channe_ remains
I
SPECIAL FEATURES
Magnetism from nearby appliances might affect the color of the TV picture.
If this happens, move this unit away from the appliance.
If the color is still not correct, disconnect power cord from AC outlet then reconnect it after 30 minutes.
When the end of a tape is reached during recording, playback, or fast-forward, the tape will automatically rewind to the beginning.
After rewinding finishes, the TV/VCR will eject the tape and turn itself to off.
This function is operative when Repeat Play is set to the [OFF] position.
The tape will not auto-rewind during timer recording or One Touch Recording.
This shows the elapsed recording or playback time in hours, minutes, and seconds.
(The displayed time will not change on a blank tape or blank portions on the tape.)
The "-" indication will appear when the tape has rewound further than "0:00:00" on the tape counter.
- 16EN gEl I
TV OPERATION
2
3
1
Turn on the TVNCR
Press the POWER button to turn on the TV/VCR.
Select the channel number
Press the CHANNEL
•
or • button to select your desired channel number or press the number buttons on the remote control.
Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
Adjust sound
Press the VOLUME A or V button to adjust the volume.
I VOLUME
2O
|II|illllllal
I
The TV/VCR's picture controls
- BRIGHT,
CONTRAST,
COLOR,
TINT
and SHARPNESS
-
are preset to factory specifications.
Although
they are usually the best, you may need to make some further adjustments for a natural looking image.
NOTES:
• Procedures must be followed within 5 seconds or the
Picture Control mode will be cancelled.
•
When setting the Picture Control, the Game mode will be cancelled.
Make sure ...
•
Use the remote control for this procedure.
• TV/VCR power must be turned on.
1
Select "PICTURE CONTROL"
Press the MENU button.
Press the PLAY/• or STOW• button to point to
"PICTURE CONTROL".
I
I,lrlME_ pR_RAMMING
pICTUR_ CONTROL
SETTING CLOCK
CHANNEL SET Up
IJSER'S
SET UP
V CHIP SET ttP
LANGUAttE [ENGLISH
zr_o
RETURN
TIME_EARCH
INDEX SEARCH
Then, press the EFWD,,_ button.
This function enables you to decrease the TV screen contrast and making it suitable for use with a TV
GAME.
NOTE: This function can not be set during recording.
Press the GAME button on the remote control.
"GAME" appears on the screen.
GAME
/
2
Select item you want to adjust
Press the PLAY/• or STOP/• button until desired control is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
When you press the GAME button;
•
The TV/VCR comes on automatically if it is off.
• The TV/VCR will be in external input mode automatically.
3
Adjust the picture control
Press the EFWD,'I_. or REW/<I button to adjust to your desired level.
TO CANCEL THE GAME MODE
Press the GAME button or CHANNEL • or • button on the remote control.
CONTRAST
COLOR
I BRIGHT
TINT
SHARPNESS
REW/<I to decrease
brightness
to decrease contrast
to pale to purple to soft
EFWD/I_
to increase brightness to increase contrast to brilliant to green to clear
• If there is a power failure of any kind, the unit will
r " " for thin feature.
- 17 EN
QFI I
You can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dialogue caption or text display.
CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news.
TEXT mode: By choosing the text mode, you can watch half screen text information if you want.
1-2:
You may get these captions or text information by selecting either "1" or "2". Caption "2" is used, usually for a second language if available.
1
Select "CAPTION"
Press the MENU button.
Press the PLAY/A or STOP/Y button to point to
"CAPTION".
I
_,_'_.._"_
PICTURE CO¢_TRC4_
SETrlN_O CLOCK
..... _Ls....
V-CHIP SET UP
,.
0,_&%_._
LISHI
-MENU-
ZERO R
;_"_"
INOEX SEARCH
2
Select your desired caption menu
Press the F.FWD/II_ or REW/<I button until your desired caption menu appears.
([CAPTIONI ], [CAPTION2].
[TEXT l ] or [TEXT2])
PICTURE CONTROL
_"'_°_
USER'S SET UP
_o.,,_
LANGUAGI* I_G
..... _"°"
H]
NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free closed captions from high quality antenna, cable and VCR signals. Conversely, poor quality signals are likely to result in caption errors or no captions at all. Common signal conditions which may cause captions errors are listed below:
• Automobile ignition noise
• Electric motor brush noise
• Weak snowy reception on TV screen
• Multiplex signal reception displaying picture ghosts or airplane flutter.
• Playback of poorly recorded or worn VCR tapes.
NOTE:
If the TV/VCR displays a black box on the TV screen, this means that the TV/VCR is set to the
TEXT mode.
To clear screen, select [CAPTION1], or [OFF].
[CAPTION2]
3
Exit the caption setting mode
Press the MENU button to return to TV mode.
TO CANCEL
SYSTEM
The On-Screen
THE CLOSED
Repeat steps [I] and
[2],
select [OFF] using the
F.FWD/II_ or REW/<I button.
Press the MENU button to return to TV mode.
WHEN THE CLOSED
IS ON
Display will disappear
CAPTION
CAPTION
retain its memory for this feature.
MODE
after 5 seconds.
• This is also true when the MUTE button is pressed, and when the PAUSE/STILL button is pressed while recording.
• If there is a power failure of any kind, the unit will
Make sure
...
• Use the remote
control for this procedure.
• TV/VCR power must be turned on,
- ,o -
EN c_1711
V-CHIP enables parents to prevent their children from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program's rating meets the limitations you select.
In this case, "PROTECTED PROGRAM by ..." message appears on the TV screen.
To block ratings, follow the steps below.
• Programming may be rated by the Motion Picture
Association of America (MPAA) or according to the
Television Parental Guidelines.
In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING).
TV RATING SUI" UP
Make sure
...
• Use the remote
control
for this procedure.
• TV/VCR power must be turned on.
1
Select 'V-CHIP SET UP
2
Select "TV RATING"
Press the PLAY/A or STOP/V button to point to "TV RATING".
Then, press the F.FWD,_.- button.
3
Select your desired item
Press the PLAY/& or STOP/V button to point to your desired item.
Then, press the EFWD/_button to select [BLOCK] or [VIEW].
TV-¥7 (
TV-_
TV PG (
,_E._-
Press the MENU button.
Press the PLAY/A or STOPfV but" ton to point to "V-CHIP SET UP".
..........
CHANNEL SET UP
USER S SET UP
V.CHIp
SEX Up
LANGUAGE E_3USH]
CAPTION [_l
zE,o......
TtME SEARCH
Then, press the F.FWD,,I_ button.
,,OEXSE*,C.
_%'_%%o
(
..... sE,
_P-
"_
L J
) [VIEW
[VI_V
[VIEW
[WEW
Selection
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Rating Category
Explanations
Appropriate for all children
Appropriate for children seven and older
General Audience
Parental Guidance suggested.
Unsuitable for children under
14
Mature audience only
When you select TV-Y7, TV-PG, TV- 14, or TV-MA and you press the EFWD/I_ button, the sub-ratings will appear on the TV screen.
If you select the rating category (example: TV-PG) and turn it [BLOCK] or [VIEW], the sub-ratings (example:
V for Violence) will turn [BLOCK] or [VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to [BLOCK].
To set the sub-ratings individually, follow the steps below.
When you select [TV-Y7]:
Press the STOP/V or
PLAY/A button to select
"FV" (Fantasy Violence).
Then, press the F.FWD/I_ button to select [BLOCK] or
[VIEW].
TV Y7
FV IB-OCKI
IBLOCK} l
J
When you select [TV-PG],
[TV-14]
or [TV-MA]:
Press the STOP/V or
PLAY/A button to select
"D"(Suggestive
"L"(Coarse
"S"(Sexual
Dialog),
Language),
Situation), or
"V"(Violence).
Then, press the F.FWD/I_ button to select
[BLOCK] or [VIEW].
1_ o [SkOG_
[BkOG_
Note: When you select [TV-MA], "D" does not appear on the TV screen.
The sub-ratings which set to
[BLOCK] appears next to the rating category in the TV
RATING menu.
]
[WEW]
VIEW]
TV W (
rV
G
W
MA(LSV)
8LOCK] W-PG
tt_-SV)
Tv, ?w,
Tv 1_i_sv)
8LO_3K
• When you select the rating category and turn it
[BLOCK], the higher rating will turn [BLOCK] automatically.
Also, the lower rating will turn [VIEW] automatically.
• When you turn "TV-MA" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW] automatically.
4
Exitt]t VChpsettiligmode
Press the MENU button to return to original mode.
- 19EN
OFt1
MPAA RATING SET
UP
Make sure
...
• Use the remote
control
for this procedure.
• TV/VCR power must be turned on.
Press the MENU button.
Press the PLAY/& or STOP/V button to point to "V-CHIP SET
UP".
Then, press the F.FWD/I_ button.
TIMER pROGP_MMING
_,_¢_:_'¢_°"_°°_'"°_
CHANNEL SEt
UP
USERS
SET UP
_._........
LANGOAGE ENGUSH]
CAPTION
..........
[O_F]
T_ME SEARCN
2
Select "MPAA RATING"
Press the PLAY/& or STOP/V button to point to "MPAA RAT-
ING".
Then, press the EFWD/I_ button.
TV
Mp_
RATING
R_]'I NG
............
3
Select your desired
item
Press the PLAY/A or STOP/V button to point to your desired item.
Then, press the EFWD,'II_ button to select [BLOCK] or [VIEW]•
_G.13
_c _r
[VIE
E_eCK]
Selection
G
PG
PG-13
R
Rating Category Explanations
General
Parental
Unsuitable
Audience
Guidance suggested.
for children under 13
NC-17
X
Restricted; under 17 requires accompanying, parent or adult guardian
No one under 17 admitted
Mature audience only
• When you select the rating category and turn it
[BLOCK], the higher rating will turn [BLOCK] automatically.
Also, the lower rating will turn [VIEW] automatically.
• When you turn "X" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW] automatically•
4
Exit the V-Chip setting mode
Press the MENU button to return to original mode.
- 20 EN
qEII
PLAYBACK
Make sure
...
• TV/VCR power must be turned on.
1
Insert a prerecorded tapo
If the erase-protection tab has been removed, the
TV/VCR will start playback automatically.
27
(o beg,_ piayback
Press the SLOW button to reduce the playback speed.
The VCR mutes the sound during slow motion.
You can
L control the speed by pressing the F.FWD button (faster) or the REW button (slower).
Press the PLAY button to return to normal playback.
NOTE:If it is left in the Slow mode for more than five minutes, the VCR will automatically go into the Stop mode.
Press the PLAY button.
3
To stop playback
Press the STOP button when playback is completed.
STOP
This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.
1) You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD
or REW button. (in the SP / LP / SLP modes)
2)
Press it again and the TV/VCR will now search in super high speed. (in the LP / SLP modes only)
NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the picture may revert to Black and White. This is normal.
3) Press the PLAY button to return to normal speed.
•
Tracking adjustment will be set automatically
(Digital Tracking function) when you start playback.
• However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines
(black and white streaks) may appear on the playback picture.
If this occurs, you can adjust the tracking control manually by pressing the CHANNEL • or
• button until the streaks disappear.
To return to the
DTR function, stop the tape once and start playback again.
• You can reduce the noise lines by pressing the
CHANNEL • or • button in slow mode, too. Tracking adjustment in Slow mode will not be set automatically.
NOTE: In Still mode, press the SLOW button and press the CHANNEL • or • button until streaks disappear.
To return to Still mode, press the
PAUSE/STILL button again.
You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE/STILL button during playback.
Only tapes recorded in the SLP mode will show the least amount of lines.
Press the PLAY button to return to playback.
NOTES:
• You can advance the picture one frame at a time by pressing the PAUSE/STILL button during the Still mode.
• If it is left in the Pause mode for more than five minutes, the TV/VCR will automatically switch to the Stop mode.
In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the
CHANNEL •or • button.
NOTE:
If there are video noise lines on the screen, see Tracking
Adjustment section.
- 21 EN ql _
I I
SPECIAL
PLAYBACK
Make
sure ...
• Use the remote control
for this procedure.
• TV/VCR
• Before power must be turned on.
• Insert a prerecorded playback,
tape.
follow steps below.
This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.
'. The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the
PLAY button.
ALL REPEAT: Repeat playback from the beginning to the end of the tape.
BLANK REPEAT: Repeat playback from the beginning to a blank part, which is blank for more than 10 seconds.
1
Select "USER'S SET UP"
Press the MENU button.
Press the PLAY/A or STOP/V button to point to "USER'S SET
UP".
Then, press the F.FWD,_button.
..... ,_.AMM,._
PICTURE _TROL
_.,_,_ ....
USER_ SET UP
Ii_ -MENU-
ZERO RETURN
1
Select "USER'S SET UP"
(
Press the MENU button.
.....
/
i,_y";_7_%"°
Press the PLAY/A or STOP/V button to
P olnt to USER
_
S SET
UP",
_,
Up
..... _..
OFF I
ENGLI_*H]
LANGUAGE
"_"_"
Then, press the F.FWD/II.- button.
2
Set "RENTAL" to [ON]
Press the PLAY/& or STOP/Y button to point to "RENTAL".
Press the EFWD/I_
or REW/_I button until [ON] appears.
RE_'EAT
AOTO
PLAy
REqURN
2
Select "ALL" or "BLANK"
Press the PLAY/& or STOP/_' button to point to
Press the F.FWD/_ or REW/<I
J button repeatedly until your desired selection
[BLANK] appears.
[ALL] or
......
RE_EP,T PLAy f" _E,'......
_
_,
,_-L
1
3
Exit the Rental setting
Press the MENU button to return to the TV mode.
3
Exit the Repeat Play setting
Press the MENU button to return to the TV mode.
4
Start playback
Press the PLAY button to start playback.
"RENTAL
PLAYI_" appears.
• Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR.
TO CANCEL THE RENTAL MODE
4
start playback
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY _" appears.
• Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/'VCR.
• If the Rental mode is set [ON], the "RENTAL
PLAYI_" display has priority.
Repeat steps [1] and [2], select [OFF] using the i
F.FWD/I_ or REW/_I button on the remote control.
Press the MENU button to return to TV mode.
If there is a power failure of any kind, the unit will retain its memory for this feature.
TO CA NCEL THE REPEAT PLA Y MODE
Repeat steps [1] and [2], select [OFF]
using
the
F.FWD/II,or REW/_I button on the remote control.
Press the MENU button to return to TV mode.
If there is a power failure of any kind,
the unit will
retain its memory for this feature.
- 22 EN
SEARCH
Make sure.
• Use the remote control for this procedure.
• TV/VCR power must be turned on.
• Insert a tape.
This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding.
NOTE:
Zero Return WILL NOT work on a blank tape or a blank portion of a tape.
• This function will not operate in recording mode.
• This function is not operative when a cassette tape is not inserted in the TV/VCR.
In the example below:
To watch a program after 2 hour
50 minutes from the present position, in either direction.
1
Insert a tape.
...............................................
1
Stop a tape at your desired point
Rewind or fast forward the tape to the beginning point I at which you want to review.
2
Select "TIME SEARCH" mode
Press the MENU button.
Press the PLAY/& or STOP/V
I button to peat
,
_1
(
|
. _. o-
,ME,P_,,_,,_
SE F'ING
CLOCK
to TIME
/
_E,._o,
2
Reset
the counter to 0:00:00
]SEARCH.
ii
/
VJ,_HIP
SEX
OF
....LAN/iUAGEo
_ Then, press the F.FWD,q_ button.
1,- _%,%_
_
INDEX SEARCH
Press the COUNTER RESET button repeatedly.
/
J
3
Begin recording or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is completed.
3
Enter your desired
time
(,,_s=,_,_
Press the PLAY/A or STOP/V button until your desired time appears.
(Example: "2:50" stands for 2 hours 50 minutes)
If you wish to cancel the Time Search at this point, press the MENU button.
4
To activate "ZERO RETURN" mode
Press the MENU button.
Press the PLAY/& or STOP/V button to point to "ZERO RE-
TURN".
Then, press the F.FWD,'_ button.
I
TIMER F'ROGI_AMMr t,_3
PICTURE CONTROL
SE_B_
CL_K
CH_NEL SEI UP
USER'S _T
Up
V-CH)P SET UP kANGUAGE [ENO-_SH I
TIME SEARCH
INOEX SEARCH
The counter will appear on the TV screen.
The tape will automatically stop when the counter returns to 0:00:00.
4
Begin Time Search
By pressing the REW/<I or F.FWD/I_" button, the
TV/VCR will rewind or fast forward to the specified point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback automatically.
TO CANCEL THE TIME
SEARCH
at this
point
The Time Search function makes it possible to quickly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.
NOTES:
• Time Search can be set up to a maximum of 9 hours
50 minutes (9:50) by 10 minutes at a time.
Press the STOP/EJECT button on the TV/VCR or the remote control.
This will delete the selected time.
- 23 EN
")Ell
NOTE: Every time an index signal is skipped, the number in the program indicator decreases by one.
This feature provides a method of indexing the starting point so that it can be easily returned to in either fast forward or rewind mode.
• The index mark will be made automatically when the
REC button is pressed.
It will also be marked at the starting point of Timer recording, OTR, and recording by Auto Satellite Link.
• The index mark will not be recorded if the
PAUSE/STILL button is pressed and released during recording.
• The time gap between making the index marks on the tape should be greater than 1 minute for SP recording,
2 minutes for LP recording and 3 minutes for SLP recording.
Example: You are watching program number 4 and want to fast forward to program number 7. Yon must skip three programs.
4
After Index
Search
When the preset program is reached, the TV/VCR will start playback automatically.
• A video cassette must be inserted in the TV/VCR for this function to work.
• The number of Index Searches can be set up to 20,
• This function will not operate in the recording mode.
• When you want to cancel the Index Search while in progress, press the STOP button.
CURRENT PLAYBACK PROGRAM
I
Beginning of tape !' End of tape r4 3
INDEX MARK
2 1
1 2 3
1
Select"INDEX SEARCH"
Press the MENU button.
Press the PLAY/A or STOP/V button to point to "INDEX
SEARCH".
Then, press the
EFWD/I_button.
TIMER PROGRAMMItCG
P_TURE
CO_TROL
,_T fl NG CLOCK
C_Nt_EL
SET UP
USER'S SET Up
V_HIP SET UP
_-
.MENU_
ZEP_O RETURN
lIME SEARCH
INDEX SEARCH j
2
Enter your
desired
number
Press the PLAY/A or STOP/V button until the number of programs that you want to skip appears,
(Example: "03" for 3 programs)
_b," iN_|pEARCH
• The Index Search mode will be cancelled if the procedures are not activated in 30 seconds.
3
Begin Index Search
Press the REW or EFWD button.
The TV/VCR begins rewinding or fast forwarding to the beginning of desired program.
- 24 EN
9Erl
RECORDING
Make
sure ...
• TV/VCR power must be turned on.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
NOTE: This unit will ONLY record and view the same channel.
You can ONLY watch the same TV program that is being recorded.
1 Select the channel to be recorded
Press the number buttons on the remote control or the
CHANNEL
•
or • button.
I CHI° 1
Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box.
Press the PAUSE/STILL button ( .....
to temporarily stop recording.
Press the PAUSE/STILL or
L
RECORD button to resume recording, sP
NOTES:
• After five minutes, the TV/VCR
will automatically
switch to the Recording mode to prevent tape damage.
• If "CLOSED CAPTION (ON)" is selected, the On-
Screen Display
will appear for 5 seconds, then dis-
appear.
2
Select the tape speed
Press the SPEED button to select the desired tape speed (SP/SLP).
3
Begin
recording
Press the RECORD button.
4
Stop recording
Press the STOP button when recording is completed.
- 25 EN
9Eli
This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR.
Make
sure ...
• TVNCR power must be turned on.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
NOTES:
• This function CANNOT be done from the remote control.
• Recording starts immediately when the REC/OTR button is pressed.
• When the REC/OTR button is pressed 18 times, the
TV/VCR returns to the Normal Recording mode.
• To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control.
• To show the remaining time, press the DISPLAY button on the remote control so that "OTR" appears on the TV screen. (It will show up momentarily then disappear.)
• Recording stops when 0:00 is reached.
• Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120).
• If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, ejects the tape and turns itself off.
1 push
22pushes
3pushes
17 pushes
Display
0:30
Recording length
(normal recording)
30 minutes
1:00
J,
8:00
60 minutes
+
480 minutes
You can make copies of video tapes made by friends or re atives for your enjoyment.
of WARNING: Unauthorized recordings copyrighted video tapes may be an infringement of copyright laws.
Connect your TV/VCR and a Source (Playing) VCR using the following diagram.
[Fig.8]
[The TV/VCR]
[Ex: Source (Playing)
VCR or camcorder]
1
Select the channel to be recorded
Press the number buttons on the remote control or the
CHANNEL • or • button.
Audio/Video adapter cable w0E0 k @_ @
(not supplied)
@
Remember:
If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.
1) Insert a pre-recorded video cassette into the Source
(Playing) VCR or camcorder.
2) Insert a blank video cassette, or one you want to record over, into the TV/VCR's cassette compartment.
2
Select the tape speed
Press the SPEED
(SP/SLP).
button to select the desired tape speed
3
Begin OTR I"°_"__°_
Press the REC/OTR button on | the TV/VCR as many times as | needed.
The recording length I_ will be determined by the num_-_ ber of times you press the REC/OTR button. Each additional push will increase the recording time by 30 minutes. It is set up to 8 hours.
3) Press the SPEED button on remote control for the
TV/VCR to select the desired recording speed
(SP/SLP).
I
4) Press the CHANNEL • or • button on the TV/VCR until "AUX" appears on the screen.
5) Press the RECORD button on the TV/VCR.
6) Begin
NOTE: playback
For best results during dubbing, use the
TV/VCR s front panel controls whenever possible.
The remote control might affect the source (Playing) VCR's playback operation.
of the tape in the source
VCR or camcorder.
(Playing)
- 26 EN
_)EII
TIMER
And press the F.FWD/I_ button.
• If you have not yet set the clock, "MANUAL CLOCK
SET" appears.
If so, follow stops [31 to [81 on page 15.
Then set the timer recording.
I
I,-
TIME_ PROSRAMMING
PICTURE
CONTgOL
SETTING CLOCK
CHAN'_L
SET U¢_
USEWS SET tff'
V CH_P SEt Up
¢A?_'iOa
[O F]
ZERO RETURN
TIME SEARCH
iNOE× $_RCH
You may set the TV/VCR to start and end a recording while you are away.
You can set 8 programs to record on specific days, daily or weekly within a I year period.
In the example below, the timer is being set to record:
DATE: MAY 6th, 1999
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
2
Select your desired program position (1~8)
Press the PLAY/A or STOP/V _ 0. :'_""°_'_"
2-
Make sure
...
position.
Then, press the F.FWD/I_ button.
=" ±: ::: ::: :::
2:
• Use the remote control for this procedure.
• If a cable box or satellite box is connected with the
TV/VCR you will be limited to record only one channel.
And the channel selector on the TV/VCR must be selected to the output channel of the boxes
CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes.
3
Set the channel number
Press the PLAY/& or STOP/V button until the desired channel number appears.
(Example: CH61)
!_:: ::: ::: ::: ::
• Clock must be set to the correct time and date before setting the timer.
• TV/VCR power must be turn on to program it.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
• The channel you want to record is properly set in advance.
(See page 13.)
Then, press the EFWD/I_ button.
Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.
4
Select once, every day or weekly recording
For once recording :
Avoid over lap of programs...
There is a chance that a program will not he recorded. when programs
overlap;
• The program with an earlier start has priority.
Pmgr_
1 lO_AM-11_00AM
P_¢im
2
9_AM_10_AM
P,o, .3
: I
i
9_30AM_12_00PM
i i
9:00AM 10:_AM
*Recording [_tiod
11:00AM
is SHADED
1
Select "TIMER PROGRAMMING"
Press the MENU button.
Press the PLAY/& (up) button
until the desired date appears.
(Example: "5/06" for May
6th).
Then,
F.FWDtl_button.
press the
TIMER p_GRAMMING
CH DAlE BEGIN END
-
-
_ ....
• Once the earliest program
finishes,
the overlapping programs will begin recording in sequence.
• The illustration below demonstrates the sequence
of
recordings.
Program 1
Program 2
Program 3 t 0:00AM - 11:00AM
9:00AM - 10:00AM
9:30AM12:00PM
, For every
day recording : To record a TV program at
' the same time on the same channel
every day. (Example."
Monday through Sunday)
Press the STOP/V (down) button until "EVRY DAY" appears.
Then, press the F.FWD/I_ button.
!ol
.......
:4.{::_xi_!!
!!! i
12:00PM
is pointed by
For weekly recording
: To record a TV program at the same time on the same channel every week. (Example:
I every Monday)
Press the STOP/V (down) button until "EVRY" and your desired day of the week appear together.
Then, press the F.FWD/I_ button.
I TIMER pROGRAMMING t
Confirm "TIMER PROGRAMMING" pressing the PLAY/A button.
-
>_
- 27 EN
9Eli
5
Set beginning hour
Press the PLAY/A or STOP/V button until the desired hour appears.
(Example: "7, PM" for
7:30PM)
Then, press the EFWD/I_ button.
I
......
17
TIMEA PROGRAMMING 1
[:: :I::::: ::: ::: ::J
Set beginning minute
Press the PLAY/A or STOP/Y
_. _.........
_-- .__
button until the desired minute appears.
(Example: "30" fox"
7:30PM)
Then, press the EFWD/I_ button.
t
!_ _ !_ii
1.eMiR pat2G_MtNG
....
i1
,j
7
Set end hour
Press the PLAY/A or STOP/'V button until the desired hour appears.
(Example: "8, PM" for
8:50PM)
Then, press the F.FWD/I_ button.
¢H t)ATE BEG_ _o
To shift the time schedule of an automatic timer recording.
1) Press the POWER button.
2) Repeat step [ I 1 on page 27.
3) Press the RECORD button and select the desired program using the PLAY/A or STOP/y button.
!
4) Press the RECORD button again.
Each additional push will shift forward the begin/end time for recording by I0 minutes. When the recording is already in progress, each additional push will shift forward the end time only. If you want to cancel while setting, press the PAUSE/STILL button on the remote control. The recording time returns to the original time.
NOTE: When you shift forward the time schedule during recording, the recording speed will automatically be set to the SLP mode.
5) Press the F.FWD/_ or REW/_I button to exit the setting menu. Then press the MENU button to return to original mode.
TO CORRECT
A PROGRAM
Set end minute
Press the PLAY/A or STOP/Y button until the desired minute appears•
8:50PM)
(Example: "50" for
Then, press the EFWD/I_ button.
TIMER p_n_,MMING1 k:: ::: ::: ::: ::: ::)
9
Set the tape speed / _"-:"'_""_::"_"'_l
/
Press the PLAY/A or STOP/V /-- 2. -- -:_ __- ;:]
/ button until
• the desired tape speed appears.
(Example: SP)
I1--
:: 2: :: ::-- :-'_!
_:: 2: ::: ::: ::: ::)
• While setting a program; press the REW/<I button to go back one step and enter the correct numbers using the PLAY/A or STOP/'V button.
• After setting a program;
1) Press the POWER button•
2) Repeat steps [1] - [2] on page 27.
3) Press the F.FWD/I_button (or press the REW/<I button to go back one step) until the part you want to correct begins flashing, then make the changes pressing the PLAY/_ or STOP/_ button.
4) Press the POWER button to set automatic timer recording.
10
Finish setting the program
Press the EFWD/I_ or REW/_I button. The program is now completed.
To set another program, repeat steps [2] to [10].
Press the MENU button to return to original mode.
1"1 Set the timer
Press the POWER button to set automatic timer recording.
The TIMER REC indicator lights up.
• You must turn off the TV/VCR to activate automatic timer recording.
If power is not turned off and you continue watching
TV, "TIMER REC STANDBY" starts flashing on the TV screen 2 minutes before the programmed start time.
TO CANCEL AN AUTOMATIC
RECORDING
TIMER
After setting a program;
1) Press the POWER button.
2) Repeat steps [ 1] - [2] on page 27 and select a program you want to cancel.
3) Press the T-PROG.
CLEAR button.
4) Press the MENU button to return to TV mode.
While recording
is in progress;
1) Press POWER button.
2) Press the STOP/EJECT button on the TV/VCR.
- 28 EN
QFII
TO CItECK THE BEGIN/END TIME
I ) Press the POWER button so that the REC indicator goes off.
2) Press the MENU button.
3) Confirm "TIMER PROGRAMMING" is pointed.
4) Press the F.FWD/I_" button.
The details of programs appear on the TV screen.
5) Press the MENU button to return to TV mode.
3
Auto Return will begin
When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the recorded program(s).
' NOTE:
• If you press the POWER button while tape is rewinding, the Auto Return will stop.
4
Watch tile recorded program
Press the PLAY button.
7D CA NCEL
THE AUTO RETURN
:MODE
• Make sure the channel you want to record is properly set in advance.
• It is not necessary to press the RECORD button for timer recording.
• Recording begins automatically at the Start time.
• If you are recording using a Timer mode, you may not operate the unit manually.
Repeat steps [1] and [2], select [OFF] using the
EFWD/_ or REW/'_I button.
If there is a power failure of any kind, the unit will retain its memory for this feature.
• The erase-prevention tab on the cassette must be in place (or you must put tape over the hole).
• If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off.
The Wake Up Timer function turns on the TV/VCR without using the POWER button after a desired period of time.
+ NOTES:
• Use the remote control
for this procedure.
• If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, and the tape will be ejected.
• Clock must be set to the correct the timer.
time before setting
• If you want to select [TAPE], you must insert a cassette tape in the TV/VCR.
The tape will start playback automatically on your desired time.
With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically.
• Use the remote
UP".
control
Press the ]MENU button.
for this procedure.
1 Select "USER'S SET UP"
(
Press the PLAY/A or STOP/V button to point to "USER'S SET
,_.
TIMER t
....
pROGRAMMING pICTURE
CONTROL
+_,.a....
CHANNEL SET UP
USER'S
CAPTION
SET Up
[OFF]
_,_"°"_+°""_.o.
iNDEX SEAnCH
1
Select "WAKE UP TIMER"
Press the WAKE UP/SLEEP button once, and confirm
"ON/OFF' is pointed.
Press the EFWD/I_ or REW/_I button until [ON] appears.
!
+
,+_ +++ _+,_]+ _ +_,+ _++++
2
Select 'LTV" or "TAPE"
++
WARE UP ll-ON_Fmu
++ rIME
++++++++_+
ON l
]
+m
Then, press the EFWD/I_button.
2
Set "AUTO RETI+RN" to
ION]
...........
.... ......
Press the PLAY/A or STOP/V button to point to "AUTO RE-
TURN".
Press the F.FWD/I_ or REW/"q button until [ON] appears.
g_,, ,_g_ j
_ button until
"TV/TAPE".
to point to
Press the PLAY/A or STOP/V button, and select [TV] or
[TAPE].
i+ ........
,_a_, ]
.....
,,%'_"_%_,7_,
- 29 EN
9Eli
3
Set wake up time
Press the PLAY/A or STOP/Y button until to point to "TIME".
Press the EFWD,tlb or REW/"q button until your desired wake up time appears.
_,,_, _oF,
Each additional push will increase (or decrease) the time by 10 minutes.
4
Exit the Wake Up Timer setting
Press the MENU button to return to TV mode.
TO CANCEL THE WAKE
UP
TIMER
Repeat step [1] but select [OFF].
The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired period of time.
NOTE:
• This function does not operate during Recording mode.
1
Select "SLEEP TIMER"
Press the WAKE UP/SLEEP button on the remote control until "SLEEP TIMER" appears.
2
Set sleep time
Press the PLAY/A, STOP/Y,
F.FWD/I_
or REW/_I
button
until your desired sleep time appears.
_,_.
E_oo_
Each additional push will increase the time by 30 minutes up to 120 minutes.
Press the MENU button to exit the Sleep Timer setting.
TO CANCEL THE SLEEP TIMER
Press the WAKE UP/SLEEP button on the remote control until "SLEEP TIMER" appears.
Then, press the PLAY/A, STOP/Y, F.FWD,'IP" or
REW/_I button and select [OFF].
To view the time left for sleep timer press the WAKE
UP/SLEEP button twice then the MENU button to exit the sleep timer setting.
MAINTENANCE
CABINET CLEANING
• Wipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in lukewarm water and wrung dry.
• Never use a solvent or alcohol.
Do not spray insecticide liquid near the TV/VCR.
Such chemicals may cause damage and discoloration to the exposed surfaces.
l.
Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-968-3429, to locate an Authorized Service Center.
NOTES:
• Remember to read the instructions included with the video head cleaner before use.
• Clean video heads only when problems occur.
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.
• Playback picture may become blurred of interrupted while the TV program reception is clear. Dirt accumu- lated on the video heads after long periods of use, or the usage of rental or wom tapes can cause this problem.
If a streaky or snowy picture appears daring playback, the video heads in your TV/VCR may need to be cleaned,
SERVICING
• Should your TV/VCR become inoperative, do not try to correct the problem by yourself.
There are no user-serviceable parts inside.
Turn off, unplug the power cord, and please call our help line at 1-800-
968-3429, to locate an Authorized Service Center.
- 30 EN
1)17 I
TROUBLESHOOTING GUIDE
If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below.
Check the corresponding CORRECTIVE ACTION column to
remedy the problem.
No power.
PROBLEM
No picture and sound.
No picture or poor picture on
TV/VCR.
No sound or poor sound.
Timer recording is not possible.
Cannot go into Record mode.
Playback picture is partially noisy.
No picture but the audio is OK in playback.
No operation by infrared Remote
Control.
CORRECTIVE ACTION
• Make sure the AC cord is connected to an AC outlet.
• Make sure the power is turned on.
• Make sure the AC cord is connected to an AC outlet.
• Check antenna connection.
• Let the TV/VCR program its' tuner memory.
• Adjust direction or replace antenna.
• Adjust picture controls.
• Adjust volume control on remote control or main unit.
• Press the MUTE button to restore sound.
• Make sure the timer recording is set correctly.
• Make sure the power is off.
• Make sure the TV/VCR clock is set correctly.
• Make sure the tape has an erase-prevention tab. If need, cover the hole with plastic tape.
• Adjust tracking control for a better picture using the CHANNEL
•
or • button on the TV/VCR.
• Head cleaning may be necessary.
Refer to "AUTO HEAD
CLEANING" on page 30.
• Make sure the AC cord is connected to an AC outlet.
• Check batteries in remote control.
Video or color fades in and out when • You can not copy a copyrighted video tape. You are experiencing making a copy of a video tape.
copy guard protection.
CLOSED CAPTION
PROBLEM POSSIBLE REMEDY
My TV/VCR is showing that are misspelled,
My TV/VCR in its entirety what is being said.
My captions captions will not show the text or there is a delay of are scrambled with white boxes on the TV screen,
My program guide listed a TV show as being closed captioned but none of the captions were displayed,
• You are watching a live broadcast and spelling errors made by the closed captioning production company may pass through uncorrected.
A prerecorded program will not show any misspelled words because of the normal time available for editing the captions.
• Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts.
Most captioning production companies can display a dialogue to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-to-date with the current TV screen dialogue.
• Interference caused by building, power lines, thunderstorms, etc. may cause scrambled or incomplete captions to appear.
• Broadcasters may at times use a time compression process to speed up the actual program so that additional advertising time can be given. Since the decoder cannot read the compressed information, captions will be lost.
My prerecorded video tape does not • The video tape was either an illegal copy or the tape duplicating show any captions.
The tape box company accidentally left out the captioning signals during the mentions it being closed captioned, copying process.
My TV screen shows a black box on • You are in the TEXT mode. Select CAPTION mode to CAPTION certain channels.
[OFF].
- 31 EN
9Eli
SPECIFICATIONS
GENERAL SPECIFICATIONS
CRT : 13 inch in-line gun, 90 ° deflection tube
Television system :
NTSC-M
Closed caption system :§ 15.119/FCC
Video Heads :
Tape width :
Tape speed
SP :
Rotary
1/2 inch four-head
LP :
SLP :
Tuner channel
TV VHF Low :
33.40mm/sec.
16.67mm/sec.
11.12mm/sec.
#2-#6
#7-#13
#14~#69
TV VHF High :
TV UHF :
CATV
VHF :
MID band :
SUPER band :
HYPER band :
Terminals
5A
A5-AI, A-I
J-W
W+I~W+84
Antenna input :
Video input :
Audio input :
Earphone :
VHF/UHF 75 ohms unbalanced
RCA connector x 1
RCA connector x 1
1/8" monaural (3.5 mm)
ELECTRICAL
SPECIFICATIONS
Video input level :
Audio input level :
Video S/N ratio :
Audio S/N ratio :
0.5-2.0Vp.p
- 15dBs
More than 46dB
More than 43dB
OTHER SPECIFICA
?'IONS
Power requirement : AC 120V/60Hz
Power consumption : 65W
Dimensions:
Weight :
H: 15-13/16" (402mm)
W : 15-3/16" (386mm)
D : 14-3/4" (376mm)
24.3 lbs (1 lkg)
• Designs
and specifications are subject to change without notice and without our legal obligation.
• If there is a discrepancy
between languages, the default language will be English.
CABLE CHANNEL DESIGNATIONS
If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels with letters or letter-number combinations.
Please check with your local cable company.
The following is a chart of common cable channel designations.
CATVchannel 5A
........................
rv Display
1
2
2
3
3
4
4
5
5
6
6
t
7
7
_
8
8
_
CAT_/__c_h_a_n_n_e[r_C__l__ F___,___G ,___H__ ___!_____
J__.___K
TV Display
16 17 18 19
20
21 22
23 24
9
9
•
10
10
L
11
11
12
12
___L___L M____L__N
25
26 27
13
A B
13 14 15
_9_
P Q
28 29 30
CAW channel R
.........
r-
--_ .....
TV Display 31
S
32
t ......
T
33
I- ....
U
34
I.....
V
35
4 .....
W
36
W+l
,t ....
37
W+2 W+3 W+4 W+5 W+6
[
W+7 W+8 W+9
I- ....
d
....
_-L .....
I...................
38 39 40 41 42 43 44 45
CATVchannelW+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24
....
3 .....
t ......
r-
-I .....
I .....
i- ....
F-.....
q ....
4-
-I- .....
I -J ....
L ........
TV Display 46 47 48
49
50 51 52 53 54 55 56 57 58 59 60
CATVchannelW+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39
TV Display 61 62 63 64 65 66 67 68 69
70
71
72 73
74 75
CATVchannel W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54
.................................
_ .....
_ .....
_ .....
I ......
p ....
i......
.i
....
i. ......
L.
___
TV Display 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
TV Display
91 92 93 94 95 96 97 98 99 100 101 102 103 104 105
CATVchannel
W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79
......
1
....
I- ....
I .....
1 .....
i" ......
t- ....
-I ......
4 ....
I- .....
I......
4 ....
[ .....
L ....
TVDisplay
106 107 108 109 110 111 112 113 114 115 116 117 118 119 120
CATVchanne!
W+80 W+81 W+82 W+83 W+84
TVDisplay 121 122 123 124 125
- 32 EN
9El I
SYLVANIA
LIMITED WARRANTY
PUN _,1C()RP "_ ill rupalr Ilia, S'_ LV '_NI _. pt_luut Iruc OI uharg.- m the LIS g Ill the e_ eul ut dele,A m mdleri.ib
or "_i kinanshtp a_ lollo'._ ",
DURATION:
PARTS:
FUNAI CORP t_ dl pro,,qde parts to replace delecHve part', '-,.Hhout char_ze :or one ( I ) year iroiD the date of ollgmal letadpmcha,,e Two 12 ,,eap. tot Picture Tube Cert,un [_art', ale excluded lro 1 h s
'A'alTLI llty
LABOR: FUNAI CORP wdl provide the labor _Hhout chmge for a peuod ot ninety 190) days horn the date ot original letafl putcha,,e
LIMITS AND EXCLUSIONS:
Thl_
_.anldnlI_
In e\tellded
Ith Ihe prtldU_l hI ohlalll tlnh [o the oFl_llld[ retdll puruha'.el
,er\ I_e Under till* wdrlallD,
This %,lrl.tnD, shall
Illtt
be
extended
It) otrl_, other person Ol
ff,m,leree
_. pur_ha,c veu¢lpt on oIlIer prool ol ol I_l[Kll relal] Iluluhane _AIll be re:BIlled hlgelll¢l
Tills \\dr[allD, IS _llld dnd ot IIO etteul i[ d]l_ nerldl iltllllbe['_ till the pit)duct die .dieted
replayed detaued illl_Mng 13l i1 ner_l_-e _d', dttelllpled h_. rill unauthot i/ed ,er_ lue uenter Th., FUN AI CORPOR ATION Lnmted ,a arrant) doe, nat appl,_ to any the pl odu_t not puruhased and u,ed itl the U nlled Stale,
Thl_ \_.al rdlll}
Ill _hlpmenl nll_u_e dbu_e thl_ produ_.l
o111\ uu\el ill lal[ures nn_h.lndhng
_lr ddmd_e
• talhtre_
_ hl_.h
die due ttl deteuts
_&tl•ed nll_dppll_dll_ln by rep.llr_
dh_r,lllllll
_ hlv_ re_ult_ :Toll1 fire
II1 llldle[i,II l]_ltld
alterations
ldtlh_, hghtnln_ or _.t,_rkrnanshlp o[ produ_.l
in.:,ilia:ion
tlr other ,lul_
_ htuh outur
Tlot _tlpphed
impropel
ot God b_ during
FUN ntdlntell_qll,ge n_lllllal
AI CORP
_olnnlert tl_e It doe.
not to\er dall/,lge \\ hluh o_.utlr_
Ol ddlllage '_ hluh le_tlh_
Idl U_e _uuh ,is hotel l ent.ll
lrtlm
_r
,tvvlde[11 iiBque u_e _d
THIS WARRANT'_
PARTS COMPLETE
DOES NOT COVER PACKING Ma, TERI a.LS
ANY ACCESSORIES
AqSEMBL'¢
PARTS DEMO OR FLOOR MODELS
(EXCEPT
REMOTE CONTROL) a.N'l EOSMETIC
FUNAI CORP AND
ITS
REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR
AN'_
GENERAL
INDIRECT
OR
CONSEQUFNTI
WARRANT':
PARTOFFUNAI a.L DAMAGES ARISING OUT OF OR OCCASIONED
IS MADE IN LIEU OF ALL OTHER WARRANTIES.
ALLOTHERWa.RRANTIESINCLUDINGTHE
BY THE USE OF OR THE INABILIT'_ TO USE THIS PRODUCT THIS
EXPRESS OR IMPLIED.
AND OF ALL OTHER LIABILITIES ON THE
WARRANTY OF MERCHANTABILITY.
AND FITNESS FOR A PARTI-
CULAR PURPOSE
ALL WARR_.NT_
ARE HEREBY
INSPECTIONS
DISCLAIMED
AND REPAIRS
B'_ FUN _.1 AND ITS REPRESENTATIVES
MUST BE PERFORMED B'_
RR _.NTY
IS VALID WHEN THE UNIT IS CARRIEO IN TO FUNAI AUTHORIZED
FUNAI
SERVICE
IN THE
FACILITY
UNITED
AUTHORIZED
STATES
SERVICE CENTER THIS Wa,
V_ HEN YOU ARE
RETURNING
THE
PRODUCT FOR SERVICE
TO THE
FACTORY SERVICE
CENTER.
PLEASE CONTACT THE
FUNAI
SER'_ICE
DEPART_,IENT
POSTAGE,
INSURANCE
TO
AND SHIPPING
RECEIVE
COST
A R._
INCURRED
(REPAIR
AUTHORIZATION)
IN PRESENTING
OR SENDING
NUMBER
PRIOr
"1OUR SYLVANI
TO SHIPPING
_ PRODUCT
ANY
FOR SERVICE
ARE SHIPPER S RESPONS[BILIT'_
CAREFULLY PACK WITH PROPER PACKING MATERIALS
ATTACH
WRITTEN DOCUMENTATION
DETAILING
PREFERABL'_ IN THE ORIGINAL
THE
COMPLAINT.
TO THE
CARTON
OUTSIDE OR
AND IF NEEDED
INSIDE
OF THE
DOUBLE
CARTON.
BO'_ IT
TH[- PRODUCT
MUST
BE ACCOMPANIED
IS ATTACHED THE \t ARRANTY WILL
BY a. COP'_ OF THE ORIGIN
NOT BE HONORED
AL RETAIL
AND REPAIRS COSTS
PURCH
WILL
\SE RECEIPT
BE CH ARGED
IF NO PROOF OF PURCHASE
IMPORTANT:
THIS LIMITED _3,ARRANTY GIVES "_OU SPECIFIC LEGAL RIGHTS, YOU blA'_ H AVE OTHER RIGHTS TH gT VARY FROM STATE TO
STATE
IF
AT AN', TIME DURING THE W ARRANT'_ PERIOD _ OU ARE UNABLE TO OBTAIN S _.TISFa.CTION "_,'ITHTHE REPAIR
OF THIS PRODUCT PLE ASE CONTACT FUNAI CORP
ATTENTION:
FUN A[ CORP RESER\ ES THE RIGHT TO MODIF'I AN'_ DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE
To locate your nearest SYLVANIA Authorized Service Center or for general service procedure, please call
1-800-968-3429 or write to the following:
FUNAI CORPORa, TION
Factory Serwce
I00 North Street.
Teterboro
Center
NJ 07608
Tel :1-800-968-3429
Printed in Malaysia OEMN01569A
T5021XX
****
Public link updated
The public link to your chat has been updated.
Advertisement