Toshiba 15DLV76 LCD Television with DVD Owner's Manual

Add to My manuals
60 Pages

advertisement

Toshiba 15DLV76 LCD Television with DVD Owner's Manual | Manualzz

TOSHIBA

O,G,TALAU0,O

L

÷

÷

15DLV76

OWNER'S MANUAL

_,,,_ ...................

introduction

Connections

Basic playback

Advanced playback

Others

@2006 Toshiba Corporation

Before operating the unit, please read this manual thoroughly.

*Screen size is approximate.

J5X00221A [E] (Cover} 1

21/02/2006, 8:36 PM

÷

CAUTION:

TO REDUCETHE RISKOF ELECTRIC

SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

CAUTION

: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE

FULLY INSERTED TO PREVENT BLADE EXPOSURE.

FCC NOTICE :

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the distance between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC (Federal Communications Commission) Rules could void the user's authority to operate this equipment.

WARNING: Handling the cord on this product or cords associated with accessories sold with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

Location of the required

Marking

The rating sheet and the safety caution are on the rear of the unit.

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE

READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN

FOR FUTURE REFERENCE.

SHOULD THE UNIT REQUIRE

MAINTENANCE,

LOCATION.

CONTACT AN AUTHORIZED SERVICE

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORM-

ANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPO-

SURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT

TRY TO OPEN THE ENCLOSURE.

VISIBLE LASER RADIA-

TION MAY BE PRESENT WHEN THE ENCLOSURE IS

OPENED.

DO NOT STARE INTO BEAM.

°

IIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIII

CERTIFICATION: COMPLIES WITH

FDA RADIATION PERFORMANCE

STANDARDS, 21 CFR SUBCHAPTER J.

÷

,J5XL2_IA [E] (P02-05)

2 _ 21/02/2006, 8:37 PM

÷

iMPORTANT SAFEGUARDS

1.

READ iNSTRUCTiONS

2.

All the safety and operating instructions should be read before the unit is operated.

RETAIN iNSTRUCTiONS

3.

The safety and operating instructions should be retained for future reference.

HEED WARNINGS

4.

All warnings on the unit and in the operating instructions should be adhered to.

FOLLOW INSTRUCTIONS

5.

All operating and use instructions should be followed.

CLEANING

6.

7.

8.

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a soft dry cloth for cleaning the exterior cabinet only.

ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.

WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

ACCESSORIES

PORTABLE CART WARNING

(symbol provided by RETAC)

Do not place this unit on an unstable cart, stand, tripod, bracket, or table.

The unit may fall, causing serious injury, and serious damage to the unit.

8A.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9.

VENTiLATiON

Slots and openings in the cabinet back or bottom are provided for ventilation, and to ensure reliable operation of the unit, and to protect it from overheating.

S3125A

These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper

10.

ventilation is provided or the manufacturer's instructions have been adhered to.

POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not

11.

sure of the type of power supply to your home, consult your appliance dealer or local power company.

GROUNDING OR POLARiZATiON

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).

This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug

12.

fully into the outlet, try reversing the plug. Do not defeat the safety purpose of the grounding-type plug.

POWER-CORD

PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

Z

o=

o

&

÷

3

J5X00221A [E] (P02-05) 3 _ 21/02/2006, 8:37 PM

÷

iMPORTANT SAFEGUARDS

(coot o. ¢

13. LiGHTNiNG

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. However, if there is thunder or lightning now, do not touch the unit and any connected cable.

This will for you not to receive the electric shock by the serge of thunder.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the

National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

÷

ANTENNA LEAD IN WIRE

GROUND CLAMP

ELECTRIC SERVICE

EQUIPMENT

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

NEC-NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H) $2898A

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

For example: a.

When the power-supply cord or plug is damaged.

b.

If liquid has been spilled, or objects have fallen into the unit.

c.

If the unit has been exposed to rain or water.

d.

If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation.

e.

If the unit has been dropped or the cabinet has been damaged.

f.

When the unit exhibits a distinct change in performance, this indicates a need for service.

1"

JSX 0221A [E l (P02=05) 4 /..

21/02/2006, 8:37 PM

19. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

20. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

21. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

22. DISC SLOT

Keep your fingers well clear of the disc slot as it is closing. It may cause serious personal injury.

23. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause a product damage. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

24. HEADPHONES

When you use the headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage.

25. LASER BEAM

Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the laser beam. It may cause sight damage.

26. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.

27. LCD

Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.

Should the LCD panel be broken and liquid leaks out, do not inhale or swallow it. Doing so may cause poisoning.

If you have got it into your mouth, wash it out and consult your doctor. If your hands or clothes have touched it, wipe them with alcohol and a cleaning cloth and then wash them well.

28. NOTE TO CABLE TV SYSTEM INSTALLER

This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

_= o

&

ON DISPOSAL

This product contains

mercury.

Disposal

of mercury may be regulated due to environmental considerations.

or the Electronic

For disposal

industrial

or recycling

AHiance

information,

: www.eiae.org.

please

contact your local authorities

÷

J5X00221A [E] (P02-05) 5 _ 21/02/2006, 8:37 PM

5

÷

[] Do not shock the LCD panel.

It may cause unit damage and malfunction.

[] When shipping the unit, the original shipping carton and packing materials come in handy.

For fully protection, repack the unit as it was originally packed at the factory.

[] Do not use volatile liquids, such as insect spray, near the unit. Do not leave rubber or plastic products to contact the unit for prolonged period. They will leave marks on the finish.

[] The top and rear panels of the unit may become warm after a long period of use. This is not a malfunction.

[] When the unit is not in use, be sure to remove the disc and turn off the power.

[] If you do not use the unit for a long period, the unit may not function properly in the future. Turn on and use the unit occasionally.

Moisture condensation

damages the unit. Please read the following

carefully.

Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass.

In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the unit.

0 The color LCD is manufactured using extremely high precision technology, but even so may include certain pixels that do not operate properly (that do not light, that remain lit constantly, etc.). We do our best to keep the number of these defective pixels to a minimum, but please understand that they cannot be completely eliminated even with the most advanced manufacturing technologies available today.

0 The fluorescent tube which illuminates the panel from the inside will deteriorate with use. When the LCD becomes dim, flickers, or does not illuminate, contact your dealer for replacement.

• The brightness of the LCD monitor differs slightly depending on the viewing angles. Adjust the angle to obtain the best viewing.

(The recommended angle is

90 degrees to the monitor.)

[] Moisture

condensation

following

cases.

occurs

during

the

• When you bring the unit directly from a cold place to a warm place.

• When you use the unit in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit.

• In summer, when you use the unit in a hot and humid place just after you move the unit from an air conditioned room.

• When you use the unit in a humid place.

16

[] When you place this unit near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted.

In this case, place the unit away from the TV, radio, or VCR.

[] To avoid damage to this product, never place or store the unit in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration.

[] Always place the

TV on the floor or a sturdy, level, _

Sturdy tie (as short as possible)

/_

stable surface that can support

IIl_l

I1_

/_Hooks

_ the weight of the _/_ unit. Use a sturdy _._.€_\_ tie between the I

TV's rear hook __1v slue

_t _...

_'J_

Band

__ __

TV top

I screw and the rear wall, pillar, etc., to secure the TV.

If you use a TV stand, fix the TV by using the attached band.

[] Do not use the unit when moisture

condensation

may occur.

If you use the unit in such a situation, it may damage discs and internal parts.

Remove the disc, connect the power cord of the unit to the wall outlet, turn on the unit, and leave it for two or three hours.

After two or three hours, the unit will have warmed up and evaporated any moisture.

Keep the unit connected to the wall outlet and moisture condensation will seldom occur.

Wall outlet

Use a soft, dry cloth for cleaning.

• Do not use any type of solvent, such as thinner and benzine, as they may damage the surface of the unit.

J5XL221A

!

[E] (P06-07) 6

÷

21/02/2006, 8:37 PM

÷

on discs

• Do not touch the playback side of the disc.

For example, handle the disc so that it is shown in figure below.

0

• Do not attach paper or tape to discs.

Playback side

Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters.

Video CDs and

Audio CDs are divided into tracks.

DVD video disc

DVD video disc

--Title 1 _1_

Chapter 1 Chapter 2

!

!

I i

Title 2

Chapter 1 Chapter 2 Chapter

!

!

! _,

0

&

Video CD/Audio CD

Tra_,k 1 Video CD/Audio CD

÷

• Fingerprints and dust on the disc cause picture and sound deterioration.

Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.

0

X

Each title, chapter or track is assigned a number, which is called "title number", "chapter number" or "track number" respectively.

There may be discs that do not have these numbers.

• Do not use any type of solvent benzine, commercially available such as thinner, spray for vinyl LPs. It may damage cleaners or antistatic the disc.

• Do not store discs in a place subject to direct sunlight or near heat sources.

0 Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier.

• Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.

The unauthorized recording, use, distribution, or revision of copyrighted materials including, without limitation, television programs, videotapes, and DVDs, is prohibited under the Copyright Laws of the United

States and other countries, and may subject you to civil and criminal liability.

This product incorporates copyright protection technology that is protected by method claims of certain

U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.

Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision

Corporation.

Reverse engineering or disassembly is prohibited.

÷

7

J5X00221A [E] (P06-07) 7 _ 21/02/2006, 8:37 PM

on discs (Continued)

÷

This owner's manual explains the basic instructions of this unit. Some DVD video discs are produced in a manner that allows specific or limited operation during playback.

As such, the unit may not respond to all operating command.

This is not a defect in the unit.

Refer to instruction notes of discs.

The following symbol may appear on the TV screen during operation.

[.

x j

It means that the operation is not permitted by the TV/

DVD or the disc.

For example, sometimes it is unable to stop the playback of copyright message of the disc when the

STOP (11) button is pressed.

Alternatively, this symbol may also indicate that the feature is not available for the disc.

The region number of this unit is 1. If region numbers, which stand for their playable area, are printed on your

DVD video disc and you do not find _ or [_-_, disc playback will not be allowed by the pT_yer. (In this case, the unit will display a message on-screen.)

Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable.

This DVD supports Video CDs equipped with the PBC

(Version 2.0) function.

(PBC is the abbreviation of

Playback Control.) You can enjoy two playback variations depending on types of discs.

Video CD not equipped with PBC function

(Version 1.1)

Sound and movie can be played on this DVD in the same way as an audio CD.

Video CD equipped with PBC function

(Version 2.0)

In addition to operation of a Video CD not equipped with the PBC function, you can enjoy playback of interactive software with search function by using the menu displayed on the TV screen (Menu Playback).

Some of the functions described in this owner's manual may not work with some discs.

This unit can play the following discs.

Disc Mark Contenls

Disc

Size

Maximum

playback time

Approx. 4 hours

(single sided disc)

DVD

video

discs _

v i D E 0

Audio

12 cm

Approx. 8 hours

(double sided disc)

(moving pictures)

8 cm

Approx. 80 minutes

(single sided disc)

Approx. 160 minutes

(double sided disc)

Audio v,ooo +

CDs

Video

[DIGITALVIDEO) (moving pictures)

12 cm Approx. 74 minutes

(single sided disc)

8 cm Approx. 20 minutes

(single sided disc) cDsAUdi° (_]o_@

DIGITALAUDIO

Audio

12 cm Approx. 74 minutes

8 cm

(single sideddisc)

Approx. 20 minutes

(single sided disc)

The following discs are also available.

@ DVD-R/RW discs of DVD video format

@ CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA,

JPEG or DivX ® format

@ Kodak Picture CD and FUJICOLOR CD format

Some of these discs may be incompatible.

, You cannot play discs other than those listed above.

, You cannot play discs of DVD-RAM, DVD-ROM, Photo

CD, etc., or non standardized discs even if they may be labeled as above.

, Some CD-R/RWs cannot be played back depending on the recording conditions.

, This unit uses the NTSC color system, and cannot play DVD video discs recorded in any other color system (PAL, SECAM, etc.).

, This unit can play an 8cm disc. Please do not use a disc adapter.

It may cause trouble.

, Please do not insert any disc of an irregular shape into the unit, as it may interfere with the function of the unit. You may not be able to remove it.

, Please do not use after market accessories, such as a ring protector, as this may cause trouble with the operation of the unit.

Because of problems and errors that can occur during the creation of

DVD and CD Software and/or the manufacture of DVD and CD discs,

Toshiba cannot assure that the DVD player contained in this TV will successfully play every disc bearing the DVD and CD Iogos.

If you happen to experience any difficulty playing a DVD and/or CD disc on the DVD player contained in this TV, please contact Toshiba

Customer Service.

is a trademark of DVD Format/Logo Licensing Corporation.

÷

,J5XI0281A [El (P08-13)

÷

22/02/2006, 9:26 AM

÷

introduction

IMPORTANT SAFEGUARDS ............................ 3

Precautions .......................................................

6

Notes on discs ...................................................

7

Contents ............................................................

9

Identification of controls ..................................

10

Connections

Antenna connections .......................................

14

Cable TV connections .....................................

15

Connecting to optional equipment ................... 16

Power source ..................................................

20

Basic setup

Setting the language .......................................

21

To memorize channels ....................................

22

TV operation

TV operation ....................................................

23

Closed captions ...............................................

25

Setting the V-Chip ...........................................

26

Picture control adjustment ...............................

28

Adjusting the picture mode ..............................

28

Selecting the color temperature ...................... 29

Sound control adjustment ...............................

30

Stereo and Second Audio Program (SAP) ...... 30

Basic playback

Playing a disc ..................................................

31

=_

Advanced

playback

Zooming .........................................................

34

Locating desired scene ..................................

34

Repeat playback ............................................

35

A-B Repeat playback .....................................

35

Program playback ..........................................

36

Random playback ..........................................

36

Changing angles ............................................

37

Title selection .................................................

37

DVD menu ......................................................

37

Changing soundtrack language .....................

38

Subtitles .........................................................

38

Disc status ......................................................

39

To turn off the PBC ........................................

39

MP3/WMA/J P EG/DivX ® and Audio CD operation .................................

40

Repeat and program playback using file browser ...........................................

44

&

O

Function setup

Customizing the function settings .................. 46

Temporary cancel the rating level by DVD disc ...................................................

52

Others

Language code list .........................................

53

Troubleshooting .............................................

54

Reception disturbances ..................................

56

Specifications .................................................

57

Limited United States Warranty .....................

58

÷

J5X00221A [E] (P08-13) 9 _ 21/02/2006, 8:38 PM

9

ntificatlon of controls

See the page in [_ for details.

÷

Front

CHANNEL (V/A) buttons [_

STOP( [] ) button [_

PLAY (_) button [_

Speaker peaker

÷

10

Remote sensor

POWER indicator

_ 21/02/2006, 8:38 PM

÷

Left Side Right Side

Adjusting the angle of the base

Approx. 15° Approx. 5°

=2

2-.

O

Disc slot

You can adjust the angle of the

TV-screen for 5° forward or for 15° backward from vertical angle.

Hold the base of the TV while adjusting the angle.

÷

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII_

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII o

IIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIII

0 0

IIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIII

COAXIAL DIGITAL AUDIO OUT ja!f ©

Antenna jack

I

J:I /

IDEO IN (LINE 1 IN) jack

DC input ja | COMPONENT VIDEO IN

| (Y, PB, PR) (LINE 1 IN) jacks

AUDIO IN (L/R) (LINE 1 IN) jacks

_ 21/02/2006, 8:38 PM J5X00221A [E] (P08-13) 11

11

d

ntificatlon

of controls (Continued)

÷

The instructions in this manual describe the function on the remote control. See the page in [_ for details.

EJECT button [_

TV/DVD button [_

Direct channel selection buttons (0-9) [_

Numbered buttons (0-9) [_

POWER button [_

SLEEP button [_

RECALL button [_

JUMP button [_ --

INPUT SELECT button [_ --

PLAY MODE button [_ --

GAME button [_ --

TOP MENU button[_[_ --

TOP MENU

DVD MENU

CH RTN button

ZOOM button [_

B MUTE button [_

VOL +/- buttons[_

CANCEL button [_[_ i

MENU button [_

SETUP button [_

PLAY button [_

STOP button [_ --

SKIP buttons [_

REV button [_

FWD button [_

SLOW buttons [_ --

ANGLE button [_

AUDIO button [_

SLOW SLOW

£EPEATA-B CAPTION

q::)

AUDIO SUBTITLE ANGLE

*DVD MENU button[_

Direction buttons ( A/v/_l / I,)[_

-CH +/-buttons[_

-ENTER button [_

-RETURN button [_

-PAUSE button [_

CLOSED CAPTION button [_

REPEAT A-B button [_

SUBTITLE button [_

÷

*DVD MENU button

Use the DVD MENU button to display the menu included on many DVD video discs.

To operate a menu, follow the instructions in "DVD menu."

12 _ 21/02/2006, 8:38 PM

Open the battery compartment cover in the direction of the arrow,

_J Install two "R03/AAA" batteries

(supplied), paying attention to the polarity indicated in the battery compartment.

_,_ Replace the compartment cover.

o,.

&

O

÷

,, Aim the remote control at the remote sensor and press control buttons to operate.

,, Operate the remote control within 30 ° angle on either side of the remote sensor, up to a distance of approx. 5 meters.

Approx. 5 meters

÷

Caution:

,, Never throw batteries into a fire.

Notes:

,, Be sure to use AAA size batteries.

Dispose of batteries in a designated disposal area.

o

Batteries should always be disposed of with the environment in mind.Always

dispose of batteries in accordance with applicable laws and regulations.

If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones.

o

When necessary to replace batteries in the remote control, always replace both batteries with new ones.

Never mix battery types or use new and used batteries in combination.

Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.

13

J5X00221A [E] (P08-13) 13 _ 21/02/2006, 8:38 PM

enna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system.

If you are using a cable TV service (CABLE), see page 15 for Cable TV connections.

Antenna jack

Antenna jack

75 ohm coaxial cable

(not supplied)

300-75 ohm matching transformer (supplied)

Connect the 75 ohm cable from the combination

VHF/UHF antenna to the antenna jack on the back of the TV/DVD.

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, use the 300-75 ohm matching transformer.

÷

Antenna jack

_2otb_pprlie

UHF 300 ohm _ twin-lead wire J

(not supplied)

300-75 ohm matching transformer (supplied)

Connect the UHF 300 ohm twin-lead wire to the combiner (not supplied).

Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm matching transformer. Attach the transformer to the combiner, then attach the combiner to the antenna jack on the back of the TV/DVD.

÷

VHF 300 ohm twin-lead wire

(not supplied)

Antenna jack

Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the combiner (not supplied).

Attach the combiner to the antenna jack on the back of the TV/DVD.

twin-lead wire

(not supplied)

÷

21/02/2006, 8:38 PM

ble

TV connections

This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable YV converter box.

Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.

75 ohm coaxial cable

Antenna jack

For basic cable service not requiring a converter/descrambler box, connect the Cable TV 75 ohm coaxial cable directly to the

Antenna jack on the back of the TV/DVD.

O

O

&

O

÷

If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect the output jack of the converter/descrambler box to the antenna jack on the TV/DVD. Follow the connections shown below. Set the TV/DVD to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to select channels.

Incoming

75 ohm

Cable TV _

-[

Converter/ descrambler

_.

J

75 ohm cable to

TV/DVD

Antenna jack

÷

premium channels

......................

...............

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B" position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the "A" position, tune your TV/DVD to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/ descrambler box to tune scrambled channels.

Incoming

75 ohm

Cable TV

_Sp litter descrambler

A/B switch

Converter/

75 ohm cable to TV/DV D

_-

Antenna jack

Y

15

J5X00221A [E] (P14-25) 15 _ 21/02/2006, 8:38 PM

nnecting

to optional equipment

You can enjoy VCR, camcorder or TV game with connection to external input.

INPUT SELECT

GAME

÷

Press INPUT SELECT repeatedly

"VIDEO1", "VIDEO2", "ColorStream" to select the desired mode.

or TV channel will display on the screen for 4 seconds.

TV Channel _

(Rear lower left) (Left sid

VIDEO1 _VlDEO2eq

ColorStream 4

Note: This key will not operate in DVD mode.

To playback from the VCR, connect the VCR to the TV/DVD as shown.

Select the "VIDEO2" by pressing INPUT SELECT repeatedly.

Left side (LINE 2 IN'

(red)

vc° ,wht ,

The LINE 1 IN terminals can be used | in the same way.

)

t t t To Audio/Video OUT

L_,_/_,udioNideo cable (not supplied) To AUDIO(L/R)/VlDEO

Note: Picture might be muted for some VCR playback.

This is not a malfunction of this unit.

IN

To playback from the camcorder, connect the camcorder to the TV/DVD as shown.

Select the "VIDEO2" by pressing INPUT SELECT repeatedly.

Left side (LINE 2 IN)

: Signal flow _ Camcorder t t t' To Audio/Video OUT

(yellow).

I terminalscan be used| in the same way,

)

Audio/Video cable (not supplied)

To AUDIO(L/R)/VlDEO IN

You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.

1. Connect a TV Game to the TV/DVD.

2. Select the "GAME" by pressing GAME.

The GAME mode screen appears.

, This TV/DVD has the GAME mode function (see page 24).

Left side (LINE 2 IN)

\

: Signal flow

I

TV GAME

To Audio/Video OUT

I Only the LINE 2 IN

GAME mode.

terminals can be

1

_ Audio/Video cable (not supplied)

Notes:

You can also change the TV screen to the desired mode by pressing the CH +/buttons.

To AUDIO(L/R)NIDEO IN

The TV/DVD can also be used as a display device for many video games.

However, due to the wide variety of different types of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams.

You'll need to consult each component's Owner's Manual for additional information.

Interactive video games that involve shooting a "gun" type of joystick at on-screen target may not work on this TV/DVD.

J5X 0221A [El (P14-25) 16 _..

21/02/2006.8:38 PM

÷

If you connect a VCR with an S-VIDEO cable to the S-VIDEO IN jack on the left side of the TV/DVD, you must also connect the audio cables to the AUDIO IN (LINE 2 IN) jacks on the left side of the TV/DVD. The S-VIDEO cable only carries the video signal. The audio signal is separate.

Select the "VIDEO2" by pressing INPUT SELECT repeatedly.

Left side (LINE 2 IN)

Ex VCR with S-Video

(red) \

(white).

\

To AUDIO (L/R) IN __

: Signal flow

/

"

I "1 p,aybac.

--_ I

OUT t t To Audio (L/R) OUT

ToS-V,DEO

i i _

I

I -'<_

/

I

......

S-V,DEO

Audio cable (not supplied)

S-Video cable (not supplied)

/

Note: When the S-VIDEO cable and the standard video cable are connected at the same time, the S-video cable takes precedence.

O o o

&

÷

®

Your TV/DVD is capable of using ColorStream (component video). Connecting your TV/DVD to a component video compatible DVD player, such as a Toshiba DVD player with ColorStream ® can greatly enhance picture quality and performance.

Rear lower right of the TV

Ex. DVD player with Component

video

: Signal flow

To Component

Video OUT

_oooooo ttt

?

_

t

=/,

ToAudioOUT

Audio cable (not supplied) /

Component

' video cable (not supplied)

J

To COMPONENT

(Y, Ps, PR) IN

[] Selecting Component input mode

Press iNPUT SELECT repeatedly to select ColorStream mode.

A

"When using the Component video cable, 1 an Audio cable must be connected to |

AUDIO IN (L/R) (LINE 1 IN) jacks.

This unit will not accept or display 720p progressive scan signals or 1080i interlaced high-definition signals.

If you connect a highdefinition set-top receiver, 720p progressive scan DVD player, or other similar device to the unit's ColorStream ® inputs, YOU MUST

The ColorStream ® inputs

OR 480p PROGRESSIVE MODE FIRST.

Failure to do this will cause a poor or no picture to display.

J

Notes:

• Refer to the owner's manual of the connected equipment as well.

• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted.

In this case, place the unit away from the tuner and radio.

17

J5X00221A [E] (P14-25) 17 _ 21/02/2006, 8:39 PM

÷

÷

nnecting

to optional equipment (Continued)

You can enjoy high quality dynamic sounds by connecting the * This section uses the following reference mark.

TV/DVD to optional audio equipment.

[]

[]

Front speaker

Rear speaker

Sub woofer

N : Center speaker

_ : Signal flow

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the

Dolby Digital recording system with this dynamic realistic sound by connecting the TWDVD to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor.

If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1 -channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.

_'_Amplifier equipped with

___ Dolby Digital decoderJ

To COAXIAL _ type digital "d audio input

/

|

Rear lower left of the TV

/_)@

/

To COAXIAL DIGITAL !

AUDIO OUT

.

_ Manufactured under license

/

from Dolby Laboratories.

Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Dolby Surround

Pro Logic

You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers).

[] With an amplifier equipped with a Dolby Digital

Connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital decoder."

Refer to that amplifier's owner's manual and set the amplifier so that you can enjoy Dolby Surround Pro Logic sound.

[] With an amplifier not equipped with a Dolby Digital

Connect the equipment as follows.

,, This connection is only suitable for Video CDs and Audio CDs.

Rear lower left of the TV

Amplifier equipped with a'_l

Dolby Surround Pro Logic I

To COAXIAL type digital audio input /

_

'1_

To COAXIAL DIGITAL ,._

* Connect one or two rearspeak-

AUDIO OUT I_1 ers. The output sound from the

_ rear speakers will be monaural

75 Q coaxial cable (not supplied) _ even if you connect two rear

Digital Theater Systems (DTS)

DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.

If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs.

4_

Rear lower left of the TV

_'_ Amplifier equipped with q

J a DTS decoder

D

___.

type digital audio input

To COAXIAL L_

To COAXIAL DIGITAL

AUDIO OUT

75 £2coaxial cable (not supplied) l _"DTS" and "DTS of Digital|

,.Theater Systems, Inc.

J

÷

÷

21/02/2006, 8:39 PM

MPEG2

sound

You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

Rear lower left of the TV

_Amplifier equipped with an_ type digital audio input

To COAXIAL L

To COAXIAL DIGITAL l

O

O

&

O

÷

2 channel digital

stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).

Note: PCM audio is limited to DVD or CD playback.

_"

Amplifier equipped with aq

_ I I Digital audio input / v I C==: ._-J

IToCOAXlAL

I type digital _

A I audi° input /

Rear lower left of the m_MMiiimmmmmi Tv

.......

/

TeCOAXlALDIGITAL

AUDIO OUT

75 £2coaxial cable (not supplied)

Notes:

• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver.

This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO

OUT jack of the TV/DVD.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the "COAXIAL" input of a Receiver or Processor.

• Refer to the owner's manual of the connected equipment as well.

• When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

• The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the TV/DVD's power cord. If you leave the amplifier's power on, the speakers may be damaged.

÷

J5X00221A [E] (P14-25) 19 _ 21/02/2006, 8:39 PM

19

source

÷ i

To DC input jack _.

i'i

3

AC 120V,

60Hz

AC adapter

(supplied)

AC cord

(supplied)

TO USE AC POWER

1. Connect the AC cord to the AC adapter.

2. Connect the AC adapter plug into the TV/DVD's DC input jack.

3. Connect the AC cord into a wall outlet.

Notes:

Make sure to insert the plug of each cord securely.

• During use the AC adapter becomes warm. This is not a malfunction.

WARNING:

DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC ADAPTER OR

POWER CORD. THIS COULD CAUSE FIRE, ELECTRIC SHOCK, OR DAMAGE.

DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE DISPLAYED.

THIS COULD CAUSE FIRE,

ELECTRIC SHOCK, OR DAMAGE.

CAUTION:

DO NOT USE THE AC ADAPTER IF IT IS COVERED BY A CLOTH ETC., OR PRESSED INTO A NARROW AREA.

THIS RESULTS IN POOR DISSIPATION OF HEAT AND MAY CAUSE FIRE, ELECTRIC SHOCK, OR DAMAGE.

WHEN THIS UNIT IS NOT USED FOR AN EXTENDED PERIOD OF TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF

SAFETY, BE SURE TO UNPLUG IT FROM THE WALL OUTLET.

DO NOT PLUG/UNPLUG THE PLUG WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRIC SHOCK.

IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED AC ADAPTER AND AC

CORD MUST BE USED. CONTACT THE DEALER THAT YOU PURCHASED THE UNIT FROM.

20

J5X 0221A [El (P14-25) 20 .

21/02/2006,

8:39 PM

÷

÷

the language

This TV/DVD can display the on screen language in English, Spanish or French in the TV mode.

Select the language you prefer first, then proceed with the other menu options.

ili_........ _.,_

iii

iii

iii

iii

POWER

CANCEL

A/T/I/•

ENTER

MENU

1

To turn on the TV/DVD, press

POWER.

The Power indicator on the front of the main unit will light.

powE_

©

-)oc

2

Press MENU and then press • or • to select

"SETUP".

MENU

SETUP

©

Press

• or • to select "LANGUAGE",

then

English (ENGLISH), Spanish (ESPANOL) or

French (FRAN(_AIS), then press ENTER.

÷

Press CANCEL to clear the menu screen.

CANCEL

©

Notes:

If the unit does not operate properly, or No key operation

(by the unit and/or the remote control): Static electricity,

etc.,

may affect the TV/DVD's operation.

In such case, disconnect the AC cord once, then connect it again.

• The TV section has its own menu and also DVD section has its own menu F46_.

J5X00221A [E] (P14-25) 21 _ 21/02/2006, 8:39 PM

21

÷

memorize channels

This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels.

Before selecting channels, they must be programmed into the TV/DVD's memory.

In addition to normal VHF and UHF channels, this TV/

DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CABLE selection to the TV position. When shipped from the factory, this selection is in the CABLE position.

0-9

CANCEL

•/V/4/•

CH +/-

MENU rI

Press MENU

in the TV mode, then press ,or•

to select

SETUP.

MENU

SETUP

O

Press MENU, then press < or • to select SETUP.

Press

• or • to select the "CH PROGRAM", then press •.

The TV will begin memorizing all the channels available in your area.

CH pROGRAr_

2

Press

or • to select "TV/CABLE".

TV/CABLE TV/_

Press <1or • to select "TV" or "CABLE".

TV/_ABLE _CABLE

Press CANCEL to clear the menu screen.

CANCEL

O

Cable TV chart

The chart below is typical of many allocations.

Number on this TV

Correspondin_ Cable TV ct,annel 1A4 cable system channel

AA BB cc

EE FF

WW AAA

GG HH dJ KK LL MM

VVV WWW XXX YYY ZZZ

A-5

113

113

114

114

A-3

115

115

116

116

117

117

100

118

118

101

119

119

102

120

120

103

121

121

NN

86

104

122

122

Oo

87

87

PP QQ

K7K0K /71/

88

88

89

B9

90

90

SS

73

91

91

TT

92

92

UU

93

93

VV

94

1105

123

123

11066 1107

124

124

125

125

10088 1109

01

5A

11100 '11111 11'12

CD (Z)

(3D

(2)(3£)(23

(D

2

Press MENU,

then press _ or • to select

SETUP.

Press • or to select "ADD/ERASE".

MENU

SETUP

ADD/ERASE _ERA_E

Press _ or to select "ADD" or "ERASE".

Press CANCEL to clear the menu screen.

Repeat steps 1 ~ 3 to add or erase other channel.

CANCEL

©

÷

21/02/2006, 8:39 PM

÷

operation

00 0 _ POWER

0-9

VOL +/-

(:::: :2:

÷

1

To turn on the TV/DVD, press

POWER.

The Power indicator on the front of the main unit will light.

VOWER

©

Power

\1/

Adjust the volume level by pressing VOL + or -. screen by white bars. As the volume

level increases,

so do the number of bars. if the volume decreases, also decreases.

the number of white bars

8

VOLUME 32

- VHF/UHF channels

Auto

power off

If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.

Press direct

channel

selection (0-9) to select

TV mode direct

channel

selection

When the TV/CABLE selection is in the TV position, all channels can be instantly selected by using two buttons.

(for example, to select channel

2, press "0", then "2".

If you press only "2", channel selection will be delayed for a few seconds.) For channels 10 and above, press the 2 digits in order.

CABLE mode direct channel selection

When the TV/CABLE selection is in the CABLE position, channels can be selected as follows:

TO SELECT CABLE TV CHANNELS:

1-9: Press "0" twice, then 1-9 as needed.

Example, to select channel 2, press

"002".

10-12: Press "0", then the remaining 2 digits.

Example, to select channel 12, press

"012".

13-99: Press the 2 digits in order. Example, to

100-125: select channel 36, press "36".

Press the 3 digits in order. Example, select channel 120, press "120".

NOTE FOR CHANNELS 1-12: to

If only 1 or2 buttons are pressed, the corresponding channel will be selected in 2 seconds.

TV

VHF

2-13

UHF

14-69

CATV

VHF

2-13

STD/HRC/IRC

14-36

(A) (W)

37-59

(AA) (WW)

60-85

(AAA) (ZZZ)

86-94

(86) (94)

95-99

(A-5) (A-l)

100-125

(100) (125)

01

(5A)

Note:

If a channel with no broadcast is selected, the sound will automatically be muted.

23

<

o

=,, o

÷

,J5X00221A [E] (P14-25) 23 , 21/02/2006, 8:39 PM

operation (Continued)

SLEEP

RECALL

CH RTN

MUTE

VOL +/-

GAME

CH +/-

÷ rim CHANNEL UP/DOWN

Press and release CH + or-.

The channel automatically stops at the next channel set into memory.

For proper operation, before selecting channels, they should be set into the memory.

See page 22 "To memorize channels".

[] RECALL

Press RECALL to display the current informations on the screen.

Press RECALL again to clear the display.

,, Channel number or external input mode

,* Stereo or SAP (Second Audio Program) audio status

RECALL

CD

[] CH RETURN

This button allows you to go back to the last channel selected by pressing OH RTN. Press OH RTN again to return to the last channel you were watching.

CH RTN/ZOOM

CD

[] MUTE

Press MUTE to switch off the sound.

The TV/DVD's sound will be silenced and "MUTE" will appear briefly on the screen.

The sound can be switched back on by pressing this button again or one of VOL +/-.

©

MUTE

0

[] SLEEP

To set the TV/DVD to turn off after a preset amount of time, press SLEEP on the remote control.

The clock will count up 10 minutes for each press of SLEEP

(0h0Om, 0hl0m,...

1hS0m, 2hO0m). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating.

To confirm the sleep timer setting, press

SLEEP and the remaining time will be displayed for a few seconds.

To cancel the sleep timer, press SLEEP repeatedly until the display turns to OhO0m.

SLEEP

©

[] GAME

MODE

After connecting a TV Game to the unit (see page 16), press GAME.

The TV screen changes to the Game mode.

U

,, The Game mode screen is adjusted to the suitable brightness for your eyes.

,* If GAME is pressed during standby mode, the unit turns on automatically and the Game mode screen appears on the screen.

,* Interactive video games that involve shooting a "gun" type of joy-stick at an on-screen target may not work on this TV/DVD.

[] HEADPHONES

Insert a stereo headphones (not supplied) with a 1/8" mini plug into the PHONES jack on the front panel.

If you connect headphones, the sound from TV speakers is muted.

÷

÷

21/02/2006, 8:39 PM

captions

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display closed captioned television programs. Closed captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.

÷

Captions: This closed caption mode will display text on the screen in English or another language (depending on the setting of the closed captions CH 1/2).

Generally, closed captions in English are transmitted on captions channel 1 and closed captions in other languages are transmitted on captions channel 2.

Text: The text closed caption mode will usually fill the screen with a programming schedule or other information.

After selecting a closed caption mode, it will stay in effect until it is changed, even if the channel is changed.

If the captions signal is lost due to a commercial or a break in the signal, the captions will reappear when the signal is received again. If the channels are changed, the captions will be delayed approximately 10 seconds.

The captions will appear in places on the screen where they will least interfere with the picture, usually on the bottom of the screen. News programs will usually show three-line closed captions which scroll onto the screen.

Most other shows provide two or three lined captions placed near the character who is speaking so the viewer can follow the dialogue.

Words in italics or underlined describe titles, words in foreign languages or words requiring emphasis. Words that are sung usually appear enclosed by musical notes.

For television programs broadcasting with closed captions, look in your TV guide for the closed captions symbol

(CC).

TO VIEW CLOSED CAPTIONS

Press CLOSED CAPTION to switch between normal TV and the two closed caption modes (captions and full screen text). Closed captioning will display text on the screen for hearing impaired viewers.

.

You can also select the closed captions in SETUP menu in the TV mode.

CLOSED

CAPTION

CD

.-t

< o

¢D o

Notes:

= When selecting closed captions, the captioning will be delayed approximately 10 seconds.

• If no caption signal is received, no captions will appear, but the television will remain in the caption mode.

• Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with closed captioning, especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not allow time for editing.

• When captions are being displayed, en-screen displays, such as volume and mute may not be seen or may interfere with closed captions.

• Some cable systems and copy protection systems may interfere with the closed captioned signal.

• If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.

÷

25

J5X00221A [E] (P14-25) 25 _ 21/02/2006, 8:39 PM

÷

the"C-Chip

An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc. The TV/DVD corresponds to "TV RATING" and "MOVIE

RATING". To use the V-Chip function, you must register a password.

iii

, If you forget the password, you cannot set the V-Chip.

, To avoid forgetting the password, write it down and keep in

Notes: the safe place.

1 i

0-9

--CANCEL

ENTER

A/v/,/_

MENU

Repeat steps 1 ~ 3 in "To register

password"

PASSWORD", then press _,.

MENU

SETUP

©

2

Press

• or v. New password entering screen appears.

_Ew PA_W0RD

Q (Z) (Z)

Q

Enter the password (4 digits) using Number buttons (0-9), then press

ENTER.

Enter the same password again using Number

_Ew PA_W0RD

(3DCD G:)

(2D(3_ (D

Q

(3£)

">k" appears instead of the number.

4

Enter the same password again for the safety,

then press ENTER.

Now the password was registered and V-Chip setting menu will appear on the display.

@

_0_FERMPA_WOR_ c ®Q Q

O (Z) (Z)

OD

Press

CANCEL to clear the menu screen.

CANCEL

©

Note:

The V-Chip feature is available only for the U,S, V-Chip

system,

The Canadian V-Chip

system

is not supported,

÷

26 _ 21/02/2006, 8:40 PM

÷

O

_--

--

RECALL

CANCEL

ENTER

A/•/`4/• iil

Repeat steps 1 ~ 3 in "To register

password"

"TV RATING".

4

Press `4 or • to select the desired

rating.

_TV YITV¥TITV_

TV_P_/TV14ITVMA

2

Press

OFF

TV-Y

TV-Y7

TV-G

`4 or • to select the desired rating.

: TV RATING is not set

: All children

: 7 years old and above

: General audience

TV-PG

TV-14

: Parental guidance

: 14 years old and above

TV-MA: 17 years old and above

When you select TV-

Y7, TV-PG, TV-14 or

TV-MA, press

RECALL to show the contained rating.

Press •/• or `4/• to select the desired item you want.

OFF

G

PG

: MOVIE RATING is not set

: All ages

: Parental guidance

PG-13 : Parental guidance less than 13 years old

R : Under 17 years old

Parental guidance suggested

NC-17 : 17 years old and above

X : Adult only

5

Press • or • to select"V-CHIP".

'-4

<

o o

÷

3

Press • or • to select "MOVIE RATING".

_

Press CANCEL to clear the menu screen.

CANCEL

©

To use after the TV is protected

When you try to view a program with a ratings block, a message will appear listing the program's ratings. The program can still be viewed if you press MUTE and then enter your password to temporarily bypass the block.

Note:

The V-Chip function is activated only on programs that have the rating signal.

27

21/02/2006, 8:40 PM J5X00221A [E] (P26-30) 27

÷

_ _ture

control adjustment/

Adjusting

the picture mode

Picture controls are factory preset but you can adjust them individually as follows:

And also you can select four picture modes--Standard, Sports, Movie, and

Memory--as described in the following table:

--CANCEL

--A/v/,/•

--MENU

Picture control adjustment or • to select

1

Press MENU and then press,

"PICTURE".

MENU

SETUP

°C

2

Press • or • to select the item you want to adjust, then

press,

or to adjust the setting.

1

Press MENU and then press,

"PICTURE".

or to select

MENU

SETUP

,

Press • or • to select "MODE", then

press

÷

BRIGHTNESS

CONTRAST

COLOR

TiNT

SHARPNESS darker lower paler reddish softer

Note:

The CONTRAST default setting is set to maximum (+50) at the factory.

lighter higher deeper greenish sharper

i_i_i_i_!_i!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii_i_i_!_!!_!i_!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i_!_!i_!i_i_:!_i!i!_!_!i_!_iiiI_i_i_!!_i!!!!!!_!_i_i_i_i_!!_!!i_i_i_i_!i!!i!!i!ii!i_!_i!i_!_i!i!!!i!i_!ii!ii_i_!i!i!!_i!i!!_i_i_!i!i_!!i!_i!!_!_i!!_!!i!i_i_i_!iii!_i_ii!_i_ii!ii_i_!i_!i_!i_!i_!i_!_ii_!i_i_!_i_!_i_!!_!i_i_!_!_;!_i!i_!_!_!!_!!i!i!_!_i!_i!_i!_i!_i!_i!_i!!i!!ii!i!!ii_!_

SPORTS Bright and dynamic picture (factory-set)

STANDARD Standard picture quality (factory-set)

MOVIE Movie-like picture setting (factory-set)

MEMORY Your personal preferences (set by you; see "Picture control adjustment" as left)

Press

CANCEL to clear the menu screen.

CANCEL

©

[] To return all adjustments to the factory preset levels

Press • or • to select "RESET", then press •.

Press CANCEL to clear the menu screen.

CANCEL

©

Note:

You cannot select "MODE" in the Game mode.

28 .

21/02/2006, 8:40 PM

ectmg the color temperature

ili;i_ /': ii

Q oiii

CANCEL

__ A/•/•/•

MENU

MENU

SETUP

©

÷

2

Press or • to select "COLOR

TEMPERATURE",

C_LOR

TEMPERATURE _i_,_

Press • or • to select the desired color

C_LOR

TEr_PERAT_ ,_

WARM

Press CANCEL to clear the menu screen.

CANCEL

©

Note:

You cannot select "COLOR TEMPERATURE"

Game mode.

in the

J5X00221A [E] (P26-30) 29 _ 21/02/2006, 8:41 PM

29

-4

<

o

"8

o

÷

÷

@nd

control adjustment/

Stereo and Second Audio Program (SAP)

Sound controls are factory preset but you can adjust them individually as follows:

The TV/DVD is equipped with a feature known as multi-channel TV sound or

MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound.

MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes.

Listening

to stereo sound

--

--

.........................

<>

;::

i

CANCEL

•/v/</•

MENU

1

Press MENU and then

"AUDIO"

press

or to select

MENU

SETUP

2

Press •

or •

to select the item you want to adjust, then press < or • to adjust the setting.

Repeat step 1 in "Sound control adjustment"

left, then press • or • to select "MTS".

Then

press

• or to select "STR'.

When the TV is turned on or a channel selection on

is

made, the "STEREO" will appear on the screen•

This means that Stereo broadcasting is available•

You can enjoy stereo sound from the left and right speakers•

When mono broadcasting is received, no indication is displayed.

If the broadcast signal is not strong enough or clear stereo sound is not available, select "MONO".

The noise may be eliminated.

MTS

Press _ or to select "STR" (STEREO), "SAP" or

"MONO".

BASS:

Press • or I_ to adjust the bass sound.

TREBLE:

Press • or • to adjust the treble sound.

BALANCE:

Press • or I_ to obtain an equal sound level from both speakers.

SURROUND:

Press • or _. to select "ON" or "OFF".

ON: The dynamic presence and sound created offers a thoroughly enjoyable listening experience.

OFF: Normal sound.

Listeninc to SAP

Repeat step 1 in "Sound

control

adjustment"

left, then press • or • to select "MTS".

Then

press

• or to select "SAP".

When the TV is turned on or a channel selection made, the "SAP" will appear on the screen• on

is

This means that the Second Audio Program broadcasting is available•

Press CANCEL to clear the menu screen.

CANCEL

©

To return

BASS/TREBLE/BALANCE

adjustments

to the factory preset control levels

Press • or • to select "RESET", then press

•.

÷

30 _ 21/02/2006, 8:41 PM

a disc

This section shows you the basics on how to play a disc.

CAUTmON

Keep your fingers well clear of the disc slot when disc is loading or unloading.

Neglecting to do so may cause serious personal injury.

POWER VOLUME

+/-

PLAY STOP EJECT

÷

Preparations:

• When connecting to other equipment, turn the power off.

On the TV-screen, "_," changes to "Reading" and then

The Power indicator on the front of the main unit will light.

• Everytimeyou press POWER, theTV/DVDstarts from

TV mode.

• When using an amplifier, switch on the amplifier.

Press TV/DVD

on

the remote controm to select

DVD

The DVD startup screen will appear on the screen,

• A menu screen will appear on the TV screen if the disc has a menu feature.

Press A/V or • / • to select title, then press

ENTER. Title is selected and play commences.

Press VOLUME + or - to adjust the volume.

VOLUME

= ¢

VOLUME 32

Load a disc in the disc smot.

Load the disc in the disc slot with the label side facing forward.

(If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position.

Press STOP to end playback.

STOP []

Resuming facility m

• The unit records the stopped point, depending on the disc.

"_" appears on the screen.

Press PLAY to resume playback (from the scene point).

• If you press STOP again

("_" appears on the screen.), the unit will clear the stopped point.

[] To start

playback

Press PLAY.

PLAY

in the stop mode

Note:

If the unit does not

operate properly:

Static electricity, etc., may affect the TV/DVD's operation.

In such case, disconnect the AC cord, then connect it again.

31

ic# o f_ o

÷

J5X00221A [El (P31-35) 31 _ 21/02/2006, 8:41 PM

÷

a disc (Continued)

III To obtain a higher quality

picture

Occasionally, some picture noise may appear on the TV screen while playing a

DVD video disc because the high resolution pictures on these discs include a lot of information.

[n such case, you may reduce the SHARPNESS with the Picture control adjustment menu (see page 28).

Ill About ®@_

The ®@(::i:_

_ icons on the heading bar show the playable discs for the function described under that heading.

_.__b : You can use this function with DVD video discs.

: You can use this function with Video CDs.

: You can use this function with Audio CDs and CD-R/RW CDs.

POWER

TV/DVD

EJECT

VOL+/-

ENTER

A/T/</,

PAUSE

PLAY

STOP

[] To pause playback (still mode)

Press PAUSE during playback.

@

PAUSE

PLAY

To resume

PLAY.

mode.

normal playback, press

"

The sound is muted dudng still m To stop playback

Press STOP.

STOP

[] To remove the disc

Press EJECT.

EJECT Remove the disc after the disc comes out.

÷

Notes:

• If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen according to the type of loaded disc. In this case, check your disc again (see pages 8 and 50).

Some discs may take a minute or so to start playback.

• When you set a single-faced disc label downwards (ie. the wrong way up), "Reading" will appear on the display for a few minutes and then "Incorrect Disc" will continue to be displayed.

• Some discs may not work the resuming facility.

• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 39.

• Some playback operations of DVDs may be intentionally fixed by software producers.

Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

• Do not move the unit during playback. Doing so may damage the disc.

• Use the EJECT button to unload and eject the disc.

• Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.

There may be a slight delay between the button is pressed and the function activates.

32

J5X 0221A [El (P31-35) 32 .

21/02/2006, 8:41 PM

(:

REV

PLAY

FwoPAOSE

SKIP I_I /

SLOW 41 / 1_

÷

Press REV or FWD during

playback.

REV

_

_wD REV: Fast reverse

FWD: Fast forward playback playback

Each time you press REV or FWD button, the playback speed changes.

[] To resume

Press PLAY.

normal playback

PLAY

Notes:

The TV/DVD mutes sound during reverse and forward scan of DVD and Video CD discs. Howerer, the TV/DVD plays sound during fast forward or fast reverse play of audio CDs.

,, The playback speed may differ depending on the disc.

Press PAUSE during still

playback.

PAUSE

(_

Each time you press PAUSE, picture advances one frame.

the

[] To resume

normal playback

Press PLAY.

PLAY

Note:

The sound is muted during frame by frame playback.

Press SLOW "41 (REVERSE) or 1_ (FORWARD)

during playback.

SLOW

_

SLOW Each time you press the button, the slow-motion speed changes.

[] To resume

normal

playback

Press PLAY.

PLAY

Notes:

The sound is muted during slow-motion playback.

The Video CD cannot play Reverse Slow.

o

$f_ o

÷

Press SKIP P_< or I_.-I repeatedly to display the chapter or track number

you want.

Playback starts from the selected chapter or track.

(_ sK=P To locate succeeding chapters or tracks.

_ sKIP Playback starts from the beginning of the current chapter or track.

When you press twice in quick successions, playback starts from the beginning of the preceding chapter or track.

Note:

A "Prohibition" symbol "X" may appear at the upper right of the screen. This symbol means either the feature you tried is not available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the TV/DVD.

33

J5X00221A [E] (P31-35) 33 _ 21/02/2006, 8:42 PM

÷ e

mmg/Locatmg desired scene

<::

0-9

ZOOM

JUMP

CANCEL

ENTER

•/v/,/•

RECALL

_ zooming

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame,

_ [ _Locatmg desired

scene

Use the title, chapter and time recorded on the DVD disc to locate the desired point to playback.

In the case of VCD/CD discs, time and track are used to locate the desired point to playback.

To check the title, chapter and time, press RECALL.

1

Press ZOOM during playback.

CH RTN/ZOOM

CD

The center part of the imago will be zoomed in.

Each press of ZOOM will change the

ZOOM 0.1 (x 1.3), 0.2 (x 1.5) and 0.3

(x 2.o).

1

PreesJUMPduringplaybackorresumestopmode.

0

JUMP [

[ Title

Chapter

Time

Jump

---

--:--:--

Press

or •

to select the "Time", "Title/Track"

or "Chapter".

I

[

Title

Chapter

Time

Jump

---

---

--:--:--

1

] to view a different

part of the

Press •/v/,/• frame.

You may move the frame from the center position to UP, DOWN,

LEFT or RIGHT direction.

Press Number buttons (0-9) to input the

number.

In the zoom

mode,

press

ZOOM repeatedly return to a 1:1 view (0. Off).

OH RTN/ZOOM

(D to

Notes:

,,You can select the Pause, Slow or Search playback in the zoom mode.

,,Some discs may not respond to zoom feature.

(_

Q(_

_ _ [

Title

Chapter

Time

---

12 I

--;--:--

* If you input a wrong number, press

CANCEL.

, Refer to the package supplied with the disc to check the numbers.

Press ENTER.

Playback starts.

• When you change the title, playback starts from Chapter 1 of the selected title.

• Some discs may not work in the above operation.

Note:

In case of the Video-CD playback with PBC, the JUMP does not work. To turn off PBC, see page [_.

÷

34 _ 21/02/2006, 8:42 PM

eat

playback/A-B Repeat playback

PLAY MODE

-ENTER

-PLAY

-SKIP I_ / I_'l

REPEAT A-B

÷

PLAY MODE

©

[DVD]

Press ENTER to select "Chapter" or "Title".

@

The unit automatically starts repeat playback after finishing the current title or chapter.

A-B repeat playback allows you to repeat a section between two selected points.

Press REPEAT A-B during

playback.

"EPEATA'B

O

The start point is selected.

Press REPEAT A-B again.

REPEATA'B

The end point is selected.

Playback starts at the point that you selected.

Playback stops at the end point and returns to Point A automatically, then starts again.

[Video CD]

Press • to select "Repeat".

Press ENTER to select "Track" or "All".

The unit automatically starts repeat playback after finishing the current track.

o

=>

_o

o

@

o=

÷

,, If you set the repeat mode during stop mode, press PLAY to start Repeat playback.

[Audio CD and MP3/WMA CD]

Please "Repeat playback (CD)" _.

Press PLAY MODE again to clear the screen.

[] To resume normal playback

Select Repeat : "Off" in step 2.

Notes:

• Some discs may not work with the repeat operation.

• In case of Video CD with PBC, Repeat functions are prohibited during playback.

• Chapter/Track repeat function is canceled whenever SKIP or _ is pressed.

[] To resume normal

playback

Press REPEAT A-B again.

,_,_,T,.°

O

,,t--_

I=...I

Off"

appears on the screen.

Notes:

* In A-B Repeat mode, subtitles near the A or B locations may not be displayed.

, You cannot set the A-B Repeat for the scenes that include multiple angles.

, A-B Repeat playback does not work when Repeat playback is activated.

* You may not be able to set A-B Repeat, during certain scenes of the DVD.

* A-B Repeat does not work with an interactive DVD, MP3/WMA/

JPEG CD.

, A-B Repeat is prohibited when PBC is on.

35

J5X00221A [E] (P31-35) 35 _ 22/02/2006, 9:25 AM

÷

ram

playback/Random playback

You can arrange the playback order of tracks or files on the disc.

And the unit can also select tracks or files at random and playback them. These feature works for Video CD.

For Audio CD and MP3/WMA CD, please see "Random playback

(CD)" [_ and "Program playback (CD)" [_.

C ,:: O

0-9

CANCEL

PLAY MODE

A/V/41/_

ENTER

PLAY

Press PLAY

MODE

in the stop mode•

PLAY MODE

©

Press

or to select "Mode", then

press

ENTER to select "Program"•

Q

Press •/• to return and press ENTER•

to the left column, then

The programs you selected will start to playback in order.

,, To resume normal playback, select Mode:

"Off" in step 2.

Press • / to select

the programming position•

Use Number buttons (0-9) to input the Track

on

sequentially.

C

_)

• If you input a wrong number, press

* To program others, repeat step 3.

CANCEL.

C£)(Z) (D

(2DQ (Z)

CD (Z) (Z)

(3D

[] To change the program

1. Select Mode to "Program" (as step 2), press A/v/</l_ to select the track/file number you want to change, then press CANCEL.

2. Press Number buttons (0-9) to overwrite the new track/file number.

[] To clear the program one by one

Select Mode to "Program", press A/'_'/4/I) to select the track number. Then press CANCEL.

[] To clear all the programs

In the left column, press A/T to select "Clear Program".

Then press ENTER.

Notes:

• In playing back the Video CD with PBC, you cannot set

Program playback.

• The program is canceled when you eject the disc or turn the power off.

÷

Press PLAY

MODE

during

playback

or stop

PLAY MODE

©

Press

•/• to select "Mode",

then press

ENTER to select "Random"•

@

Press PLAY.

The Random Playback will start.

,, If you set "Random" during playback mode,

Random playback will begin after the tracldfile that is currently being played has ended.

- To resume normal playback, select Mode: "Off" in step 2.

Note:

In case of Video CD with PBC, you cannot set Random function during playback.

÷

21/02/2006, 8:42 PM

ii_!!iiiii!!!!iii!_

an gi ng an gl es/Title seleetion/DVD menu

d?b CD

CD .9 C._ ii

....

H

H

H

H

H

!!

TOP MENU

DVD MENU

,&/V/4/_

ENTER

PLAY

ANGLE

÷

When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.

1

Press

ANGLE

during

playback.

ANGLE

The current angle will appear.

Press

ANGLE

repeatedly until the desired angle

ANGLE

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii angles even if multi-angles are recorded on the DVD.

_Title selection

Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.

1

Press TOP MENU during

playback.

Title menu appears on the screen.

TOPMENU

©

Press A/V/_

@

/ • to select

the desired title.

Press

ENTER

or PLAY. start.

The playback of the selected title will

PLAY

Note:

Depending on the DVD, you may not be able to select the title.

Depending on the DVD, a "title menu" may simply be called a

"menu" or "title" in the instructions supplied with the disc.

_o o

÷

Some DVDs allow you to select the disc contents using the menu.

When you playback these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.

1

Press DVD MENU during

playback.

DVDMENU The DVD menu appears on the screen.

Press

ENTER.

O

@

The menu continues to another screen.

Repeat steps 2 and 3 to set the item completely.

pressed DVD MENU.

Press _/v/_ / • to select the desired

item.

Note:

Depending on the DVD, you may not be able to resume playback from the scene point when you press the DVD MENU button.

37

J5X00221A [E] (P36-40) 37 _ 21/02/2006, 8:43 PM

angmg soundtrack language/

Subtitles

÷

You can select the language when you play a multilingual disc.

When playing back a disc recorded with subtitles, you can select the subtitle language or turn the subtitle off.

Press

AUDIO

during

playback.

AUDIO The current soundtrack language will appear.

Press SUBTITLE repeatedly

during

playback until

SUBTITLE

r--i t

until

To turn off the subtitle,

press

SUBTITLE

"Off" appears.

until the desired

lan-

Press

AUDIO

repeatedly guage is selected.

AUDIO

r-m

The on screen display will disappear after a few seconds.

[] In case of Video CD playback

Audio type changes as follows each time you press AUDIO.

I

\

c:::::3 iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

÷

* The on screen display will disappear after a few seconds.

Notes:

* Depending on the DVD, you may not be able to change subtitles, or to turn subtitles on or off.

While playing a DVD, the subtitle may change when you loaded or eject the disc.

[n some cases, a selected subtitle language may not be changed immediately.

Notes:

* [f the desired language is not heard after pressing the button several times, the language is not recorded on the disc.

* The selected soundtrack language is canceled when you eject the disc. The initial default language or available language will be heard if the disc is played back again.

* If you select DTS in playing DTS-encoded disc, no sound will be heard from the TV/DVD's speakers.

38 _ 21/02/2006, 8:43 PM

c status/To turn off the PBC

÷

To turn off the PBC {soepagos)

With each press of RECALL, the status of the disc will appear on the screen and change as follows.

To cancel the display, press RECALL again.

RECALL

CD

DVD

ELAPSED TOTAL

TIME TIME DISC OPERATION

Press PLAY

MODE

in the stop mode.

PLAY MODE

©

Press A/V to select until "Off" appear.

@

TITLE NO.

CHAPTER

NO.

AUDIO LANGUAGE

SUBTITLE LANGUAGE

A KIND OF AUDIO

Press

PLAY MODE again to clear the screen.

m To turn on the PBC

Follow the above steps 1-2, then press ENTER repeatedly until "PBC" appear.

Note:

You can also turn off the PBC by pressing number button 1 and ENTER in the stop mode.

Video CD

DISC OPERATION

ELAPSED

TIME

TOTAL

TIME

=>

o

c#

E o

÷

TRACK NO.

J5X00221A [E] (P36-40) 39 _ 21/02/2006, 8:43 PM

39

÷

........

/WMA/JPEG/D

ivX ®and Audio CD operation

This player call playback the M P3/WMA/J PEG/DivX®-data which has been recorded on CD-R or CD-RW. To produce the M P3/

WMA/JPEG/DivX®-data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG/DivX®-encoding supplied).

The Apple-HFS-System cannot be played.

Software (not

This player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.

There are many different types of recordable disc formats (including CD-R containing MP3/WMA files). Not all recordable discs will produce optimal playback quality. The technical criteria set forth in this owner's manual are meant only as a guide. Use of CD-RW for MP3 files is not recommended.

You must obtain any required permission from copyright owners to download or use copyrighted content.

Toshiba cannot and does not grant such permission.

CD/IVIP3/WMA/JPEGIDivX® CD information

Limitations on MP3/WMA/JPEG/DivX

®'CD playback

,, MP3/WMA/JPEG/DivX ® CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters, ".mp3", ".wma", ".jpg", ".div", ".divx", ".avi".

MP3/WMA/JPEG/DivX c_CD must be correspond to the ISO standardized files.

,, This unit can read 600 files per disc. If one directory has more than 600 files, it reads up to 600 files, the remaining files will be omitted.

,, The unit is able to recognize up to a maximum of 50 directories per disc.

MP3/WMA/JPEG/DivX ® CDs cannot be used for the purpose of recording.

,, If the CD has both CDA audio tracks and MP3/WMA/JPEG/DivX ® files, only the CDA audio tracks will be played.

,, It may take more than one minute for this unit to read MP3/WMA/JPEG/DivX ®files depending on its structure.

Music recorded by "Joliet Recording Specification" can be played back, the file name is displayed (within 15 letters) on the screen. Long file names will be condensed.

The music files recorded by "Hierarchical File System" (HFS) cannot be played.

Limitations

on display

= Tile maximum number for display is 15 letters.

Available letters for display are the following: capital or small alphabets of A through Z, numbers of 0 through 9, and (under score).

,, Other letters than those above are replaced in hyphen.

Notes on MP3/WMA/JPEG/DivX ® files

To playback MP3/WMA/JPEG/DivX ® CD in the recorded order,

1. Use MP3/WMA/JPEG/DivX ® software that records data alphabetically or numerically.

2. Name each file including two-digit or three-digit number (ex. "01" "02" or "001" "002").

3. Refrain from making too many sub-folders.

CAUTION:

* Some MP3/WMA/JPEG/DivX ® CDs cannot be played back depending on the recording conditions.

* The CD-R/RW that has no music data or non MP3/WMA/JPEG/DivX ® files cannot be played back.

Standard, sampling frequency, and the bit rate:

MP3 CD

MPEG-1 Audio

32kHz, 44.1kHz, 48kHz

32kbps ~ 320kbps (constant bit rate or variable bit rate)

The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of constant bit rate.

WMA CD

WMA version 7, and 8

32kHz/48kbps, 44.1 kHz/48kbps~ 192kbps, 48kHz/128kbps192 kbps

The file recorded by mono, 48kHz, 48 kbps is not available to this unit.

DivX ® video

DivX ® version: DivX ® 3, 4, 5, and 6 (specifically 3.1.1,4.1.2, 5.0.2, 5.0.5, 5.1.1,5.2.1,6.0

Audio format: MPEG1 Layer2 (MP2), MPEG1 Layer3 (MP3)

Sampling frequencies: 32kHz, 44.1 kHz, 48kHz

Bit rate: 32kbps ~ 320kbps

Resolution: Max 720 x 576 (at 25fps), Max 720 x 480 (at 30fps) at Home Theater profile).

Microsoft, Windows Media, and Windows Logo are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

DivX, DivX Certified, and associated loges are trademarks of DivX, Inc. and are used under license.

÷

JSX 0221A [El (P36-40) 40 /..

21/02/2006, 8:43 PM

iiio t c

TOP MENU

--AlVl41_

--ENTER

RETURN

PLAY

STOP

Load a disc on which MP3 or WMA files have

About

file

menu

Operation status Scroll indicator

A file browser screen will appear on the screen.

Selected file name

Tool kit window

÷

Press

=,Iv to select file.

In case the current directory includes more than 8 files, press • or to scroll in the file list.

To see contents in folder, select the folder and then press ENTER.

To return to the upstairs directory, select <<f= Go Up ..." then press ENTER.

When PLAY is pressed after the file browser displayed, playback begins automatically starting from the first file. In this case, if the first file is an

MP3/WMA file, only MP3/WMA files are played back in order. If the first file is a JPEG file, the first JPEG file is played back. If the first file is a DivX ® file, the first DivX ® file is played back. If there is no file at a root directry, playback does not begin automatically.

Press

ENTER.

' The selected file starts playing back.

@

Press

STOP to end

playback.

Cursor

I

I

Previewwindow

I

[]

.b

:

Indicates Music file

(Audio/MP3ANMA)

:

Indicates Picturefile

(JPEG)

:

Indicates Moviefile

(DivX® video)

Notes:

The thumbnail list is displayed when the PUJICOLOR

CD or the Kodak Picture CD are played. To display the file browser, press TOP MENU.

In the case of a CD containing a mixture of MP3, WMA,

JPEG and DivX ® files, the files are played back by selecting them from the file browser.

• MP3 or WMA file oil the Kodak Picture CD is not recognized on this unit.

Notes:

,, During MP3/WMA/JPEG Playback, you cannot use JUMP and

A-B Repeat functions.

,, You can use Repeat (Track or All), Random functions and

Program playback for MP3/WMA/JPEG/DivX c_CD Playback

[] Select Files

The file type to make it display in the file browser can be chosen.

1. Press • or I_ to highlight "Select Files" at right column in the file browser.

2. Press ENTER, then press • or • to select file type from the list (Music, Picture or Movie).

3. Press ENTER to add/remove check mark.

Checked file type will be displayed in the file browser.

4. Press

RETURN

to save the setting.

,, The unit records the stopped point. "_" appears on the screen. Press PLAY to resume playback (from the scene point).

,, If you press STOP again or unload the disc, the unit will clear the stopped point.

41 o c# f_ o

÷

J5X00221A [E] (P41-47) 41 _ 21/02/2006, 8:43 PM

÷

_iiii!i !_'

/WMA/JPEG/DtvX

_

operation (Continued)

®

and Audio CD

You can select your desired JPEG file on the file menu and picture menu.

The selected JPEG file is automatically adjusted to the TV screen. (When the aspect ratio of the JPEG file is different to the TV screen, the black bar will appear at the top and bottom, or the both sides of the TV screen.)

!_

<-; _:J C)

<: 4"_"_<;

STOP

TOP MENU

PAUSE

ANGLE

Load a JPEG disc in the slot.

A file browser

screen

will appear on the screen.

The slide show enables you to view pictures (files) one after another automatically.

Preparation:

* Set "JPEG Interval" setting to "5 Seconds", "10 Seconds" or "15 Seconds" [_.

Select

your desired starting file for the

slide

Press ENTER or PLAY to start slide show from the selected file.

Press A/T to select the file.

To display a thumbnail list, press DVD MENU.

Press _/1_ or A/T to select the desired file.

(To return to a file browser, press TOP MENU.)

© ©

C__ DVD MENU

TOP MENU

,, When PLAY is pressed after displaying the file browser, playback begins automatically starting from the first file. In this case, if the first file is a JPEG file, the first JPEG file is played back. If the first file is a DivX ®file, the first

DivX® file is played back.

If the first file is an MP3/WMA file, only MP3/

WMA files are played back in order. If there is no file at a root directory, playback does not begin automatically.

4

Press ENTER or PLAY. The selected

picture

appears on the screen.

@@

Rotating an image

You can rotate an image by 90 degrees.

Press ANGLE during playback of the image.

t

"III-,", "!I

", ""11" or" Ii "appears on the screen.

,I,

If you press PAUSE during the slide show, the slide show stops temporary.

'1£ appears briefly on the screen.

If the picture appears upside down or sideways, press

ANGLE repeatedly until it's right side up.

"_.", t

"_ ", "-II11" or "Zli" appears on the screen.

Press PLAY or SKiP _ again to resume the slide show.

When the slide show playback finished, the file list appears.

To stop the slide show, press STOP. The file list appears.

Notes:

° Zoom function also can be used in viewing JPEG files.

See "Zooming" [_.

During JPEG playback, you cannot use Jump and A-B

Repeat functions.

Press STOP to end playback.

STOP The file browser appears on the screen. If you want to watch the other file, repeat steps 3 _ 4.

÷

42 _ 21/02/2006, 8:44 PM

÷

DivX® CD playback

A file browser

screen

will appear

on the

screen.

I

p ,Movie 01 DrY×

Press

A/v to select file.

DivX ® VOD content is protected by DRM (Digital Rights

Management) system.

This restricts playback of content to specific registered devices.

If the incorrect DRM file is loaded, "Authorization

Error This player is not authorized to play this video." will appear on the screen.

When you attempt to play

DivX ® VOD, the number of plays is limited and the right message will appear on the screen.

If you wish to play it, select "YES".

,* If the number of plays goes over the limit, then

"Rental Expired" will be displayed, in this case the file will not be played.

,, When PLAY has been pressed after displaying the file browser, playback begins automatically starting from the first file. In this case, if the first file is a JPEG file, the first JPEG file is played back. If the first file is a DivX ® file, the first

DivX ® file is played back.

If the first file is an

MP3/WMA file, only MP3/WMA file are played back in order. If there is no file at a root directory, playback does not begin automatically.

Press

ENTER or PLAY. The selected DivX ® movie will be played back on the screen.

Note:

In order to play DivX ® VOD content on this unit, you first need to register the unit with registration code.

See page

@.

Q

Gb

o c# o

÷

Press STOP

The file browser appears on the

C_ screen.

If you want to watch the

43

J5X00221A [E] (P41-47) 43 _ 21/02/2006, 8:44 PM

eat and program playback using file browser

In the file browser,

press

•/•

or

A/V

to select

In the file browser,

press </• orA/V

toselect

÷

Press ENTER to select "Track" or "All".

G

Press

ENTER to select "Random".

Q

Press PLAY.

PLAY The unit automatically starts repeat playback after finishing the current track.

[] To resume normal playback

Select Repeat :"Off" in step 2.

Notes:

,, The program is canceled when you eject the disc or turn the power off.

,, In case of Audio CD, the function of A-B Repeat can be used. See "A-B Repeat playback" [_.

Track repeat function is canceled whenever SKIP I,_ or is pressed.

Press

PLAY.

The Random playback will start.

[] To resume normal playback

Select Mode : "Off" in step 2.

÷

44 _ 21/02/2006, 8:44 PM

÷

Press •/• or A/V to select "Program View", then press ENTER.

Program View shows only the programed files that you have added in step 2.

to select In the file browser, press / • or A/V

@

When "Edit Mode" is black color, you can mark the files which you want to add into Program list.

Press • / or A/v to select file you want to add into the program

list.

Program View o o c#

÷

Browser View

) _ MP3-1

Press ENTER.

Selected file was marked.

Repeat this procedure to select the other files.

In the Program View,

press

PLAY.

The files were added by you.

Press •/• or A/V to select "Add To Program".

Then press ENTER.

All marked files are added into the program list.

@

*When you finish store all files which you want into the Program list, select "Edit Mode" and press

ENTER to release edit mode.

To remove file from

program

list

In the Edit Mode, switch to Program View.

Select file you want to remove, then press ENTER.

Select "Clear Program" and press ENTER.

Marked file is removed from program list.

45

J5X00221A [E] (P41-47) 45 _ 22/02/2006, 3:09 PM

stomtzmg

the function settings

You can change the default settings of the DVD mode to customize performance to your preference.

)

/% f:_-

SETUP

ENTER

A/Y/4/_

RETURN

(

÷

1

Press

SETUP

during stop mode.

MENU

The following on-screen display appears.

SETUP

©

Menu

Subtitle

Audio

: English

: English

: English

Press A or V to select the desired section, then

TV Screen

Picture

Mode

JPEG Interval

: 4:3

:Auto

: Off

Display

: Ot_

First option will be highlighted.

Press

A or Y

Pictule

JPEG

Mode

Intelval

: Auto

: Off

Change the selection

Press ENTER to save the setting.

• Repeat steps 3 and

5 to change

(_

To select another section, go other option.

4 repeatedly.

To clear

SETUP screen,

press SETUP or

MENU

SETUP

©©

RETURN

Then

press

I_- or ENTER.

The selectable

÷

46 _ 21/02/2006, 8:44 PM

÷

Section

Option

Menu

Subtitle

Audio

TV Screen

Display

Picture

Mode

JPEG interval

DRC

Parental

Password

DivX(R) VOD

Details

To select the language of "Menu", "Subtitle" and

"Audio" if more than one language are available on the disc.

Page

To select a picture size according to the aspect ratio of your TV.

To turn On or Off the operational status display on the screen.

To select a preferred picture mode from "Video",

"Film" or "Auto".

To select a preferred setting for the slide show playback.

To select On or Off for DRC (Dynamic Range Control).

To select a preferred parental level for the parental setting.

Input 4-digit password to set the parental level.

To display you r 8-character regist ration code.

o

J5X00221A [E] (P41-47) 47 _ 21/02/2006, 8:44 PM

47

tomtzmg the function settings (Continued)

÷

Menu

Subtitle

Audio

: English

: English

: English

TV Screen

Display

Picture Mode

JPEG interval

:4:3

: On

:Auto

: Off

[] Menu, Subtitle, Audio

You can select the language of "Menu", "Subtitle" and

"Audio" if more than one languages are recorded onto the disc.

English, Francais, Espanol:

The selected language will be heard or seen.

Other:

Other language can be selected (see "Language code list" [_).

Original (Audio):

The unit will select the first priority language of each disc.

Off (Subtitle):

Subtitles do not appear.

Notes:

• if the selected language is not recorded on the disc, the first-priority language is selected.

• If you want to change the OSD language, you can perform it byTV SETUP MENU [_.

[] TV Screen

You have the following screen sizes to choose from:

4:3 _ (Letter box):

Select this mode when connecting to a conventional TV. When playing back a wide screen-DVD disc, it displays the wide picture with black bands at the top and bottom of screen.

4:3 El (Pan & scan):

It displays the wide picture on the whole screen with left and right edges automatically cut off.

Note:

If the DVD disc is not formatted in the Pan & scan style, it will display 4:3 style.

[] Display

On screen display can be switched on or off when you press any buttons.

On: On screen displays appear when you press the buttons (factory setting).

Off: On screen displays do not appear when you press any buttons.

÷

48 _ 21/02/2006, 8:45 PM

÷

[] Picture Mode

There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second).

Make this selection according to the type of content being viewed.

Auto:

Select this position normally.

The DVD player automatically detects source content, film or video of playback source, and converts that signal in the progressive output format in an appropriate method.

Film:

The DVD player converts film content pictures in the progressive output format appropriately.

Suitable for playback of film content pictures.

The progressive output feature will be most effective under this selection.

Video:

The DVD player filters video signal and converts it in the progressive output format appropriately.

Suitable for playback of video content pictures.

Note:

Depending on the disc, pictures may be cut off or doubled. In this case, select "Video".

[] JPEG Interval

You can continuously playback all JPEG files automatically.

After the selection below, the disc will start playback on which JPEG files have been recorded.

Off:

Plays back one file at a time.

5 Seconds:

Plays back images in the form of a slide show at

,5 second intervals.

10 Seconds:

Plays back images in the form of a slide show at

10 second intervals.

15 Seconds:

Plays back images in the form of a slide show at

15 second intervals.

o

&

_3

J5X00221A [E] (P48-52) 49 _ 21/02/2006, 8:45 PM

49

f

_ • •

stomlzmg the function settings (Continued)

DRC : Off Parental

Password

DJvX(R)

VOD

: Off

: Change

: Display

÷

[] DRC

DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment.

Off:

[t plays back at the recording level on the disc.

On:

Loud sound such as explosion is toned down slightly when played back. This is suitable when it is connected to a stereo.

Notes:

• This function works only during playback of Dolby Digital recorded discs.

,, The level of Dynamic Range Reduction may differ depending on DVD video disc.

[]

Parental

control

setting

Some discs are specified as not suitable for children.

Such discs can be limited not to playback with the unit.

1) Press • or • to select "Parental", then press

ENTER.

"Enter Password" screen will appear.

2) Press "0000" using Number buttons (0-9).

(Please note, this is pre-setting password of this unit). Then press ENTER.

The parental level list will appear.

Level Off: The parental control setting does not function.

Level 8: All DVD software can be played back.

Level 1: DVD software played back.

for adults cannot be

3) Press • or • to select from the level 1 to level 8.

The limitation will be more severe as the level number is lower. Then press ENTER.

Notes:

* Depending on the discs, the unit cannot limit playback.

* Some discs may not be encoded with specific rating level information though its disc jacket says "adult."

For those discs, the age restriction will not work.

The password is required every time when you change the parental level.

If you input a wrong number, press CANCEL.

÷

50 _ 21/02/2006, 8:45 PM

÷

[] Set the new password

1) Press • or • to select "Password", then press

ENTER.

"Enter Current Password" screen will appear.

2) Press Number buttons (0-9) to input the current password (If the password has not been set yet after you purchase this unit, it is "0000").

3) Then press ENTER.

"Enter New Password" screen will appear.

Press Number buttons (0-9) to input the new password.

4) Press ENTER.

Now your new password has been set. Be sure to remember this number!

If you forget

the password.

1) Press EJECT to remove the disc.

2) While holding 7 down on the remote control and then press STOP on the front panel. "Password

Clear" appears on the screen.

Now the password has been returned to the initial value ("0000").

[] DivX® VOD

In order to play DivX ® VOD (Video On Demand) content on this unit, you first need to register the unit with your DivX ® VOD content provider.

You do this by generating a DivX ® VOD registration code, which you submit to your provider.

Press • or to select "DivX(R) VOD". Then press

ENTER.

Your 8-character registration code is displayed.

Make a note of the code as you will need it when you register with a DivX ® VOD provider.

Then press ENTER to select Done.

Note:

if each setup (pages [_ ~ [_) has completed, the unit can always work under the same condition (especially with DVD discs).

Each setup will be retained in the memory even if you turn the power off.

J5X00221A [E] (P48-52) 51 _ 21/02/2006, 8:45 PM

51 o

&

_3

omry cancel the rating level by DVD disc

Depending ell the DVD disc, the disc may try to temporarily cancel the rating level that you have set.

It is up to you to decide whether to cancel the rating level or not.

O

0-9

ENTER

RETURN

Load a DVDdisc.

Note:

This temporary cancellation of rating level will be kept until the disc is ejected.

When the disc is ejected, the original rating level will be set again automatically.

÷ cancel the Rating level, the screen

which

follows the "Reading" change, depending

on which

screen disc

will is played, if

you select "YES" with the ENTER

key, password

input screen will then appear.

If "NO" is selected, press EJECT to remove the disc.

Enter

the password

with Number buttons (0-9).

To exit from the entry, press

RETURN.

QQCD

(3DQ_

Q(Z)GD

Q

Playback will commence if the entered

÷

52 _ 21/02/2006, 8:45 PM

÷

nguage

code list

Enter the appropriate code number for the initial settings "Menu", "Subtitle" and/or "Audio" _.

Language Name Code Language Name Code Language Name Code Language Name Code

&bkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919

&far

&frikaans

1111

1116

Finnish

French

1619

1628

Lithuanian

Macedonian

2230

2321

Slovak

Slovenian

2921

2922

&lbanian

&mharic

&rabic

&rmenian

&ssamese

2927 Frisian

1123 Galician

1128 Georgian

1835 German

1129 Greek

&ymara

&zerbaijani

1135

1136

G reenlandic

Guarani

Bashkir 1211 Gujarati

Basque 1531

Bengali; Bangla 1224

Hausa

Hebrew

Bhutani

Bihari

Breton

Bulgarian

Burmese

1436

1218

1228

1217

2335

Hindi

Hungarian

Icelandic

Indonesian

Interlingua

Byelorussian

Dambodian

Datalan

Shinese

Dorsican

Sroatian

Szech

Danish

Dutch

1215 Irish

2123 Italian

1311 Japanese

3618 Javanese

1325 Kannada

1828

1329

Kashmiri

Kazakh

1411 Kirghiz

2422 Korean

English

Esperanto

Estonian

Faroese

1524

1525

1530

1625

1635

1722

1522

Malagasy

Malay

2111 Malayalam

1415 Maltese

Maori

2122 Marathi

1724 Moldavian

1731 Mongolian

1811 Nauru

1933 Nepali

2317

2329

2322

2330 Swahili

2319

2328

2325

2324

Somali

Spanish

Sundanese

Swedish

Tagalog

Tajik

Tamil

2411 Tatar

2415 Telugu

1819 Norwegian

1831 Oriya

1929 Panjabi

2425

2528

2611

Thai

Tibetan

Tigrinya

1924 Pashto, Pushto 2629 Tonga

1911 Persian 1611 Turkish

1711 Polish

1930 Portuguese

2011 Quechua

2033

2124

2622

2630 Twi

2731

Rhaeto-Romance 2823

Romanian 2825

Turkmen

Ukrainian

Urdu

Uzbek

2129

2121

2135

2125

Russian

Samoan

Sanskrit

Scots Gaelic

2831

2923

2911

1714

Vietnamese

VolapQk

Welsh

Wolof

Kurdish

Laothian

Latin

2131

2225

2211 Shona

Latvian, Lettish 2232

Serbian

Serbo-Croatian 2918 Yiddish

Sindhi

2928

2924

2914

Xhosa

Yoruba

Zulu

3418

2019

3525

3631

3022

3017

3011

3030

3015

3018

1225

3019

3025

3028

3021

3033

3121

3128

3136

3219

3225

1335

3325

2925

1529

2931

2933

2932

o

¢e

÷

53

J5XOO221A [E] (P53-57) 53 _ 21/02/2806, 8:45 PM

÷

Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist.

Be sure all connections are properly made when using with other units.

SYMPTOMS !

POSSIBLE

SOLUTIONS

I PAG_

POWER

TV/DVD does not operate.

,, Make sure the connection of the AC adapter and AC cord.

,, Try another AC outlet.

,, Unplug unit, then plug it back in.

20

TV BROADCAST RECEPTION

Poor sound or No sound.

Poor picture or No picture.

,, Station or Cable TV may have problems, try another station.

,, Check Volume adjustments.

,, Check for sources of possible interference.

,, Station or Cable TV may have problems, try another station.

,, Check antenna or Cable TV connections, reorient antenna.

,, Check for sources of possible interference.

,, Check picture control adjustments.

,, Station or Cable TV may have problems, try another station.

23

Poor reception on some channels.

,, Station signal is weak, reorient antenna to receive weaker station.

14

,, Check for sources of possible interference.

56

Poor color or no color.

Picture wobbles or drifts.

No CATV reception.

Horizontal or diagonal bars on screen.

,, Station or Cable TV may have problems, try another station.

,, Make sure channels are set into memory.

,, Check picture control adjustments.

,, Check antenna or Cable TV connections,

,, Check for sources of possible interference.

reorient antenna.

,, Station or Cable TV may have problems, try another station.

,, Make sure channels are set into memory.

,, Cable TV company is scrambling signal.

,, Check antenna or Cable TV connections, reorient antenna.

,, Check all Cable TV connections.

,, Set TV/CABLE selection to the CABLE position.

,, Station or Cable TV system problems, try another station.

,, Check antenna or Cable TV connections, reorient antenna.

,, Check for sources of possible interference.

23

22

28

14,15

56

23

22

14,15

15

22

23

14,15

56

23

23

56

23

14,15

56

28

No reception above channel 13.

TV shuts off.

,, Make sure TV/CABLE selection is in the appropriate position.

,, If using antenna, check UHF antenna connections.

,, No broadcast on station tuned.

,, Auto power off feature worked.

,, Sleep Timer is set.

,, Power interrupted.

22

14

22

23

24

Closed - Caption is not activated.

,, TV station experiencing problems or program tuned is not closed captioned. Try another channel.

,, Check Cable TV connection or VHF/UHF antenna, reposition or rotate antenna.

,, Press CLOSED CAPTION button to turn on the closed caption decoder.

23

14,15

25

Display is not shown in your language.

,, Select proper language in the menu options.

21

,#

÷

54 _ 21/02/2006, 8:45 PM

÷

SYMPTOMS !

IPAG

DVD

Playback doesn't start.

No picture.

No sound.

Picture is distorted during fast reverse/forward playback.

Stopping playback, search, slowmotion play, repeat play, or program play, etc. cannot be performed.

No on-screen display.

The unit or remote operation key is not functioning,

Playback does not start when the title is selected.

Audio soundtrack and/or subtitle language is not changed when you playback a DVD.

No subtitle.

Angle cannot be changed.

"X" appears on the screen.

REMOTE CONTROL

The remote control does not function.

,, No disc is loaded.

,, The disc may be dirty. Clean up the disc.

,, The unit cannot play CD-ROMs, etc.

,, TV/DVD selector is not set correctly.

,, Check the input selector of the amplifier is set properly.

,, The unit is in the special playback mode.

,, Select the correct Audio Input/Output position on AV amplifier.

,, The picture will be distorted occasionally.

,, Some discs may not do some of the functions.

,, Set Display to On.

,, Turn off the unit and unplug the AC power cord for several minutes, then replug it.

,, Check the RATING LEVEL setup.

,, Multilingual language is not recorded on the DVD disc.

,, Some discs have no subtitles.

,, Subtitles are cleared. Press the SUBTITLE button.

,, Multi-angles are not recorded on the DVD disc.

,, The function is prohibited with the unit or the disc.

,, Aim the remote control at the remote sensor.

,, Operate within approx. 5 meters or reduce the light in the room.

,, Clear the path of the beam.

,, The batteries are weak. Replace the batteries.

,, Check the batteries are inserted correctly.

31

7

8

31

33

18

48

50

38

13

38

37

33

o

¢e

÷

J5X00221A [E] (P53=57) 55 _ 21/02/2006, 8:45 PM

55

÷

Js

eptton disturbances

Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna.

Outdoor

antennas

are recommended for best results. The most common types of temevision

interference are shown below, if one of these symptoms appear when the TV/DVD is connected to a Cable

TV system, the disturbance may be caused by the local Cable TV company broadcast.

iGNiTiON

Black spots or horizontal streaks may appear, the picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.

GHOSTS

Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected by tall buildings, hills or other large objects. Changing the direction or position of the antenna may improve the reception.

SNOW

If the TV/DVD is located far from the TV station, in a fringe reception area where the signal is weak, small dots may appear in the picture.

If the signal is extremely weak, the installation of a larger external antenna may be necessary.

÷

RADIO FREQUENCY

iNTERFERENCE (RFI)

Caused by two-way radios, this type of interference produces moving ripples or diagonal streaks in the picture. Some cases may cause a loss of contrast in the picture. Changing the direction and position of the antenna or installing an RFI filter may improve the picture.

CARE AND MAINTENANCE

To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning.

Use caution when cleaning or wiping the plastic parts.

56

J5X 0221A [E] (P53-57) 56

21/02/2006, 8:45 PM

General

Power supply

Power consumption

Weight

Dimensions

AC 120V 60Hz (with supplied AC adapter)

Operation: ,50 W, Stand by: 1 W (with supplied AC adapter)

13.2 Ibs (6.0 kg)

Width: 18-3/4 inches (476 mm)

Height: 13-15/16 inches (353.5

mm)

Depth: 9-1/16 inches (230 mm)

5°C-40°C (41 °F-104°F)

Less than 80% RH (No condensation)

Operating temperature

Operating humidity

Television

LCD panel

Display method

Number of pixels

Tuner type

Receiving channels

Antenna input

Speaker

Audio output power

15-inch diagonal (Screen size is approximate.)

Color TFT LCD

1024 (Horizontal) x 768 (Vertical)

F-Synth

VHF: 2-13

UHF: 14-69

CATV: 1-125 (4A, AS-A1, A-I, J-W, W+I -W÷84)

VHF/UHF 75 _

1-1/2 x 2-11/16 inches (38.1 x 68.6 mm), 8 _2 x 2

1.SW + 1 .SW

DVD/CD Player

Signal system

Applicable disc

Pickup

NTSC

1. DVD (12cm, 8cm)

2. CD (12cm, 8cm)

1-Lens, 2-Beams System

Input/Output

S-Video input

Component video input

Video input

Audio input

Digital audio output (Coaxial)

Headphone

(Y) 1.0 V (p-p), 7,5 £2, negative sync., Mini DIN 4-pin x 1

(C) 1.0 V (p-p), 75 _

(Y) 1.0 V (p-p), 7,5 _z, negative sync., pin jack x 1

(PB, PR) 0.7V (p-p), 75 _, pin jack x 2

1.0 V (p-p), 7,5 _, negative sync., pin jack x 2

-8dBm, 50 k_, negative sync., pin jack (L/R) x 2

0.5 V (p-p), 75 _, pin jack x 1 o3.5mm

stereo mini jack x 1

Accessories

Remote control (DC-LB1) ................................................

Batteries (R03/AAA) ........................................................

AC adapter ......................................................................

AC cord (for AC adapter) .................................................

300-75 _ matching transformer .......................................

Owner's manual (this booklet) .........................................

1

2

1

1

1

1

,, This model complies with the above specifications.

,, Designs and specifications are subject to change without notice.

,, This model may not be compatible with features and/or specifications that may be added in the future.

o

¢e

57

58

Limited United States Warranty

LCD TV/DVD Combination

= Depot

Repair Warranty

Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL

CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TV/DVD COMBINATION AS A

GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR

TRANSFEREE.

LCD TV/DVD COMBiNATiONS PURCHASED iN THE U.S.A. AND USED ANYWHERE OUTSIDE

OF THE U.S.A., iNCLUDiNG, WITHOUT LiMiTATiON, CANADAAND MEXICO, ARE NOT

COVERED BY THESE WARRANTIES.

LCD TV/DVD COMBiNATiONS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., iNCLUDiNG,

WITHOUT LIMiTATiON, CANADAAND MEXICO, AND USED iN THE U.S.A., ARE NOT COVERED

BY THESE WARRANTIES.

Limited One (1) Year Warranty on Parts and Labor

TACP warrants this LCD TV/DVD Combination and its parts against defects in materials or workmanship for a period of one (1) year after the date of original retail purchase.

DURING THiS PERIOD, TACP WILL,

AT TACP'S OPTION, REPAIR OR REPLACE A

DEFECTIVE PART WiTH A NEW OR REFURBISHED

PART WITHOUT CHARGE TO YOU.

Rental Units

The warranty for LCD TV/DVD Combination rental units begins on the date of the first rental or thirty (30) days after the date whichever of shipment comes first.

to the rental firm,

Commercial Units

LCD TV/DVD Combinations sold and used for commercial purposes have a limited warranty for all parts and labor, which warranty begins on the date of original retail purchase and ends on the date that is ninety (90) days thereafter.

Owner's

Manual

and Product Registration Card

Read this owner's manual thoroughly before operating this LCD TV/DVD Combination.

Complete and mail the enclosed product registration card or register your LCD TV/DVD Combination online at www.tacp.toshiba.com/service as soon as possible.

By registering your LCD TV/DVD

Combination you will enable TACP to bring you new products specifically designed to meet your needs and help us to contact you in the unlikely event a safety notification is required under the U.S.

Consumer Product Safety Act. Failure to complete and return the product registration card does not diminish your warranty rights.

Your Responsibility

THE ABOVE WARRANTIES ARE SUBJECT TO

THE FOLLOWING CONDiTiONS:

(1) You must retain your bill of sale or provide other proof of purchase.

(2)

(3) The warranties from TACP are effective only if the LCD TV/DVD Combination is purchased and operated in the Continental U.S.A. or

Puerto Rico.

(4)

All warranty servicing of this LCD TV/DVD

Combination must be made by the Depot

Warranty Repair Center specified by the TACP

Consumer Solutions Center.

Labor service charges for set installation, setup, adjustment of customer controls, and installation or repair of antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems are your responsibility.

(5)

Warranties extend only to defects in materials or workmanship as limited above, and do not extend to any LCD TV/DVD Combination or parts that have been lost or discarded by you or to damage to the LCD TV/DVD Combination or parts caused by fires, misuse, accident, Acts of God (such as lightning or fluctuations in electric power), improper installation, improper maintenance, or use in violation of instructions furnished by TACP; use or malfunction through simultaneous use of this LCD TV/DVD

Combination and connected equipment; or to units that have been modified or had the serial number removed, altered, defaced, or rendered illegible.

How to Obtain Warranty Services

If, after following all of the operating instructions in this manual and checking the section

"Troubleshooting," you find that service is needed:

(1) For instructions on how to obtain warranty service for your LCD TV/DVD Combination, contact TACP's Consumer Solution Center toll free at 1-800-631-3811.

(2) You must include a copy or original bill of sale or other proof of purchase along with the entire

LCD TV/DVD Combination to the Depot

Warranty Repair Center specified by the TACP

Consumer Solutions Center.

You are responsible for all inbound transportation and insurance charges for the LCD TV/DVD

Combination to the Depot Warranty Repair

Center specified by the TACP Consumer

Solutions Center.

For additional information, visit TACP's website: www.tacp.toshiba.com

ALL WARRANTIES IMPLIED BY THE LAW OF

ANY STATE OF THE U.S.A.,

INCLUDING THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE EXPRESSLY

LIMITED TO THE DURATION OF THE LIMITED

WARRANTIES SET FORTH ABOVE. WITH THE

EXCEPTION OF ANY WARRANTIES IMPLIED BY

THE LAW OF ANY STATE OF THE U.S.A. AS

HEREBY LIMITED, THE FOREGOING

WARRANTY IS EXCLUSIVE AND IN LIEU

OF ALL OTHER WARRANTIES, GUARANTEES,

AGREEMENTS, AND SIMILAR OBLIGATIONS OF

TACP WITH RESPECT TO THE REPAIR OR

REPLACEMENT OF ANY PARTS. IN NO EVENT

SHALLTACP BE LIABLE FOR CONSEQUENTIAL

OR INCIDENTAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, LOST PROFITS, BUSINESS

INTERRUPTION, OR MODIFICATION OR

ERASURE OF RECORDED DATA CAUSED BY

USE, MISUSE OR INABILITY TO USE THIS LCD

TV/DVD COMBINATION).

No person, agent, distributor, dealer, or company is authorized to change, modify, or extend the terms of these warranties in any manner whatsoever.

The time within which an action must be commenced to enforce any obligation of TACP arising under the warranty or under any statute or law of the United States or any state thereof is hereby limited to ninety (90) days from the date you discover, or should have discovered, the defect.

This limitation does not apply to implied warranties arising under state law.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS AND YOU MAY ALSO HAVE OTHER

RIGHTS WHICH MAY VARY FROM STATE TO

STATE IN THE U.S.A. SOME STATES OF THE

U.S.A. DO NOTALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS, WHEN

AN ACTION MAY BE BROUGHT, OR THE

EXCLUSION OR LIMITATION OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES, SO THE

ABOVE PROVISIONS MAY NOTAPPLY TO YOU

UNDER SUCH CIRCUMSTANCES.

o

¢e

59

rOSH|BA

ColorStream ® is a registered trademark of Toshiba America Consumer Products, L.L.C.

LC_)VD" is a trademark of Toshiba America Consumer Products, L.L.C.

IIIIIIIIIIMMIIIII!

J5X00201ASH 06/02 []

Printed in Thailand

advertisement

Related manuals

advertisement