Toshiba 26CV100U LCD Television with DVD Owner's Manual

Add to my manuals
88 Pages

advertisement

Toshiba 26CV100U LCD Television with DVD Owner's Manual | Manualzz
Leading Innovation
For an overview of steps for setting up your new TV, see page 12
Note: To display a High Definition picture, the TV must be
receiving a High Definition signal (such as an over-the-air High
Definition TV broadcast, a High Definition digital cable program,
or a High Definition digital satellite program). For details, please
contact your TV antenna installer, cable provider, or satellite
provider
Dear Customer,
Thank you for purchasing this Toshiba LCD TV/DVD. This
manual will help you use the many exciting features of
your new LCD TV/DVD. Before operating your LCD
TV/DVD, please read this manual completely, and
keep it nearby for future reference.
Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
/ \ operating and maintenance (servicing)
OS instructions in the literature
accompanying the appliance.
WARNING
To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the
installation instructions. See item 25 on page 4.
WARN | NG. If you decide to wall mount this
television, always use a UL Listed wall bracket
appropriate for the size and weight of this television.
The use of any wall bracket other than a UL Listed wall
bracket appropriate for the size and weight of this
television for wall mounting this television could result
in serious bodily injury and/or property damage. See
‘Removing the Pedestal Stand” (m page 6).
NOTE TO CATV INSTALLERS
This is a reminder to call the CATV system installer’s
attention to Article 820-40 of the U.S. NEC, which
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical. For additional
antenna grounding information, see items 32 and 33 on
page 4.
Congratulations on your purchase! As you enjoy
your new product, please keep these safety tips
in mind:
The Issue
* The home theater entertainment experience is a growing
trend and larger flat panel displays are popular purchases.
However, fiat panel displays are not always supported on
the proper stands or installed according to the
manufacturer's recommendations.
+ Flat panel displays that are
inappropriately situated on
dressers, bookcases,
shelves, desks, speakers,
chests or carts may fall over
and cause injury.
TOSHIBA Cares!
* The consumer electronics
industry is committed to
| / making home entertainment
Ce enjoyable and safe.
Tune into Safety
+ One size does NOT fit all. Follow the manufacturer's
recommendations for the safe installation and use of your
flat panel display.
Carefully read and understand all enclosed instructions for
proper use of this product.
Don't allow children to climb
on or play with furniture and A
television sets. gr
Don't place flat panel
displays on furniture that can
easily be used as steps,
such as a chest of drawers.
Remember that children can
become excited while
watching a program,
especially on a “larger than
life” flat panel display. Care
should be taken to place or
install the display where it cannot be pushed, pulled over, or
knocked down.
Care should be taken to route all cords and cables
connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
Wall Mounting: If you decide to wall mount your
fiat panel display, always:
+ Use a mount that has been recommended by the display
manufacturer and/or listed by an independent laboratory
{such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall
mount manufacturers.
If you have any doubts about your ability to safely install your
flat panel display, contact your retailer about professional
installation.
Make sure that the wall where you are mounting the display
is appropriate. Some wall mounts are not designed to be
mounted to walls with steel studs or old cinder block
construction. If you are unsure,
contact a professional installer.
A minimum of two people are
required for installation. Flat
panel displays can be heavy.
Com
www.CE.org/safety
Important Safety Instructions
1) Read these instructions. pn
2) Keep these instructions. 4
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety Wide blade
purpose of the polarized or
grounding type plug. A |
polarized plug has two blades with
one wider than the other. A
grounding type piug has two blades and a third
grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Precautions
14a) CAUTION: If the TV is dropped and the cabinet or
enclosure surface has been damaged or the TV
does not operate normally, take the following
precautions:
* ALWAYS turn off the TV and unplug the power
cord to avoid possible electric shock or fire.
NEVER aliow your body to come in contact with
any broken glass or liquid from the damaged
television. The LCD panel inside the TV contains
glass and a toxic liquid. if the liquid comes in
contact with your mouth or eyes, or your skin is cut
by broken glass, rinse the affected area thoroughly
with water and consult your doctor.
* ALWAYS contact a service technician to inspect
the TV any time it has been damaged or dropped.
15) CAUTION:
+ To reduce the risk of electric shock, do not use the
polarized plug with an extension cord, receptacle,
or other outlet unless the blades can be inserted
completely to prevent blade exposure.
* To prevent electric shock, match wide blade of
plug to wide slot; fully insert.
16) CAUTION:
Do not let children swallow the product or play with
the plastic bag. Keep the product and the plastic bag
out of the reach of children.
17) CAUTION:
Do not ‘et water or other liquids come into contact
with the product, as it may result in damage.
18) WARNING:
* To prevent the spread of fire, keep candies or
other open flames away from this product at all
times.
+ Keep the product away from direct sunlight, fire or
a heat source such as a heater. This may reduce
the product lifetime or result in fire.
* The mains plug is used as the disconnect device,
and therefore install the TV/DVD near the wall
outlet so that the mains plug can be accessed
easily at all times.
Installation, Care, and Service
Installation
Follow these recommendations and precautions and
heed all warnings when installing your TV:
19) WARNING: NEVER expose batteries to excessive
heat such as sunshine, fire or the like.
ALWAYS plug the product into an outlet that
is located in such a manner that it can be
easily unplugged in case the product
requires service.
21) NEVER route the products power cord inside a wall
or similar enclosed area.
22) Never modify this equipment. Changes or
modifications may void. a) the warranty, and b) the
user's authority to operate this equipment under the
rules of the Federal Communications Commission.
DANGER: RISK OF SERIOUS
PERSONAL INJURY,
DEATH, OR EQUIPMENT
DAMAGE!
Never place the TV on an unstable cart, stand, or
table. The TV may fall, causing serious personal
injury, death, or serious damage to the TV.
24) To avoid damage to this product, never place or
store the TV in direct sunlight; hot, humid areas; or
areas subject to excessive dust or vibration.
25) Always place the TV on the floor or a sturdy, level,
stable surface that can support the weight of the TV.
In order to maintain stability and prevent the TV
falling over, secure the TV with a sturdy strap from
the hooks on the rear of the TV pedestal to a wall
stud, pillar, or other immovable structure. Make sure
the strap is tight, secure, and parallel to the floor.
Sturdy tie (as short as possible)
TV side TV top
(The sturdy tie and hooks are applicable to 15CV100U,
15CV101U, 26CV100U and 32CV100U; the band is
applicable to 15CV100U,15CV101U and 26CV100U.)
26) The apparatus shall not be exposed to dripping or
splashing, and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
27) Never block or cover the slots or openings in the TV
cabinet back, bottom, and sides. Never place the TV:
* on a bed, sofa, rug, or similar - i
surface;
* too close to drapes, curtains, or ||
walls; or q"
* in a confined space such as a |
bookcase, built-in cabinet, or
any other place with poor
ventilation.
The slots and openings are provided to protectihe TV
from overheating and to help maintain reliable
operation of the TV. Leave a space of atleast 4 (four)
inches around the TV.
28) Always place the back of the television at least 4
(four) inches away from any vertical surface (such as
a wall) to allow proper ventilation.
29) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord
is subject to wear or abuse.
30) Never overload wall outlets and extension cords.
31) Always operate this equipment from a 120 V AC, 60
Hz power source only.
32) Always make sure the antenna system is properly
grounded to provide adequate protection against
voltage surges and built-up static charges (see
Section 810 of the National Electric Code).
L..— Antenna lead-in wire
Antenna discharge unit
Tac + {NEC Section 810-20}
Grounding conductors
{NEC Section 810-21)
— Ground clamps
Power service grounding =
electrode system
{NEC Article 250 Part H)
4
DANGER: RISK OF SERIOUS
PERSONAL INJURY OR DEATH!
* Use extreme care to make sure you are neverina
position where your body (or any item you are in
contact with, such as a ladder or screwdriver) can
accidentally touch overhead power lines. Never
locate the antenna near overhead power lines or
other electrical circuits.
Never attempt to install any of the following during
lightning activity: a) an antenna system; or b)
cables, wires, or any home theater component
connected to an antenna or phone system.
Care
For better performance and safer operation of your
TOSHIBA TV/DVD, follow these recommendations and
precautions:
34) If you use the TV in a room whose temperature is 32
°F (80°C) or below, the picture brightness may vary
until the LCD warms up. This is not a sign of
malfunction.
35) Always unplug the TV before
cleaning. When cleaning your
TV, please first remove any dirt
or dust from the surface.
Gently wipe the cabinet and
the display panel surface (the
TV screen) with a dry, soft cloth only (cotton, flannel,
etc.). The enclosed cleaning cloth is for cabinet
cleaning. Harsh rubbing or use of a dirty or stiff cloth
will scratch the TV surface. Avoid contact with
alcohol, thinner, benzene, acidic or alkaline solvent
cleaners, abrasive cleaners, or chemical cloths,
which may damage the TV surface. Never spray
volatile compounds such as insecticide on the TV
surface. Such products may damage or discolor the
TV.
©
N WARNING:
\. RISK OF ELECTRIC SHOCK!
/ LS
Never spill liquids or push objects of any kind into the
TV cabinet slots.
37) While it is thundering, do not touch the connecting
cables or apparatus.
38) For added protection of your TV from lightning and
power surges, always unplug the power cord and
disconnect the antenna from the TV if you leave the
TV unattended or unused for long periods of time.
39) ALWAYS unplug the TV to completely disconnect
from mains power. When the TV is turned off using
the on/off switch, it is not completely disconnected
from power and a minute amount of current is still
consumed.
40) During normal use, the TV may make occasional
shapping or popping sounds. This is normal,
especially when the TV is being turned on or off. If
these sounds become frequent or continuous,
unplug the power cord and contact a Toshiba
Authorized Service Center.
A WARNING: RISK OF
/ \ SERIOUS PERSONAL В
~— INJURY OR EQUIPMENT +
DAMAGE! |
Never strike the screen with a sharp or heavy object.
42) * Тпе LCD screen of this product can be damaged
by ultraviolet radiation from the sun. When
selecting a location for the television, avoid
locations where the screen may be exposed to
direct sunlight, such as in front of a window.
* Never touch, press, or place anything on the LCD
screen. These actions wiil damage the LCD screen.
If you need to clean the LCD screen, follow the
instructions in item 35 on page 4.
Service
WARNING:
RISK OF ELECTRIC SHOCK!
Never attempt to service the TV yourself. Opening
and removing the covers may expose you to
dangerous voltage or other hazards. Failure to follow
this WARNING may result in death or serious injury.
Refer all servicing not specified in this manual to a
Toshiba Authorized Service Center.
44) If you have the TV serviced:
+ Ask the service technician {o use only replacement
parts specified by the manufacturer.
+ Upon completion of service, ask the service
technician to perform routine safety checks to
determine that the TV is in safe operating
condition.
45) The fluorescent lamp(s) in the LCD panel contains a
small amount of mercury.
When the TV reaches the end of lts useful life,
dispose of the used TV by the approved method for
your area, or ask a qualified service technician to
properly dispose of the TV.
Note: The lamp(s) inside this product contains
mercury. Disposal may be regulated due fo
environmental considerations. For disposal or
recycling information, contact your local authorities or
the Electronics Industries Alliance (www.elae.org).
Choosing a location for your LCD TV
To Display your LCD TV on the included
Pedestal Stand:
Observe the following safety precautions:
1) Read and Follow the pedestal assembly instructions
included with the pedestal.
CAUTION: Before beginning pedestal assembly,
carefully lay the front of the LCD Panel face down on
a flat, cushioned surface such as a quilt or blanket.
Leave the bottom of the TV protruding over the edge
of the surface and assemble the pedestal as
indicated below.
Note: Extreme care should always be used when
attaching the pedestal stand to avoid damage to the
LCD panel.
2) Place the TV on a sturdy, level surface that can
support the weight of the TV.
3) Be sure to secure the TV to a wall, pillar, surface, or
To Fold the Pedestal Stand (Applicable to
19CV100U/22CV100U)
1) Slide the lever on the back side of the pedestal stand
to the left.
2) Lay the display down.
Slide the lever io the left
Rear side of the pedestal stand
IMPORTANT: Do not operate the LCD TV while the
pedestal stand is folded.
To Display your LCD TV using a Wall
Bracket:
If you decide to wall mount your LCD TV, always use a
UL listed wall bracket appropriate for the size and weight
of the LCD TV (E page 2):
1) CAUTION: Two people are required for installation.
2) Unplug and remove any cables and/or other
component connectors from the rear of the TV.
3) Follow the instructions provided with your wall
bracket. Before proceeding, make sure the
appropriate bracket(s) are attached to the wall and
the back of the TV as described in the instructions
provided with the wall bracket.
4) IMPORTANT: Always use the screws supplied or
recommended by the wall mount manufacturer.
5) After attaching the appropriate bracket(s) to the wall
and the back of the TV, remove the pedestal stand
from the TV as described below.
Removing the Pedestal Stand
1) Carefully lay the front of the TV face down on a flat,
cushioned surface such as a quilt or blanket. Leave
the stand protruding over the edge of the surface.
Note: Extreme care should always be used when
removing the pedestal stand to avoid damage to the
LCD panel.
Remove the screws shown in the diagram below.
This will allow removal of the pedestal stand.
Once you have removed all screws holding the
pedestal stand in place, remove the pedestal stand
from the TV by sliding the pedestal stand away from
the TV.
15CV100U/15CV101U
2
—"
3
—"
Two screws
Sturdy strap
{as short as possible}
19CV100U/22CV100U
Ko == ee
4
Two screws
26CV100U/32CV100U
Three screws
* Hooks
Sturdy strap
(as short as possible)
Note:
* 15CV100U, 22CV100U and 26CV100U are used for
illustration purposes.
* The hooks for sturdy strap are not applicable to
19CV100U and 22CV 1000.
Notes on moisture condensation
Moisture condensation damages the unit. Please
read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day and drops
of water form on the outside of the glass. In the same
way, moisture may condense on this unit's internal
optical pick-up lens, one of the most crucial internal parts
of the unit.
Example of moisture не
condensation! _/— AN
Moisture condensation may occur in the following
situations:
* When you move the unit from a cold area to a warm
area.
* When you use the unitin a room in which the heat was
just turned on.
* When you use the unit in an area where cold air from
an air conditioner directly hits the unit.
* When you use the unit in a humid area.
С > it's 100
Cn warm!
AN “=
ay
„>
= УХА
y = Wl
Never use the unit when moisture condensation may
occur.
Using the unit when moisture condensation exists may
damage discs and internal parts. Connect the power
cord of the unit to the wall outlet, turn on the unit, remove
the disc, and leave it for two or three hours. After two or
three hours, the unit will have warmed up and
evaporated any moisture. Leaving the TV connected to
the wall outlet will help prevent moisture condensation in
the unit.
Wajg
(ay
ge Wail outiet
di
al
6
Notes on discs
On handling discs
* Do not touch the playback side of the disc. Handle the
disc as shown in the figure below.
Playback side
+ Do not attach paper or tape to discs.
On cleaning discs
+ Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc clean.
* Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for viny! LPs. It may damage the disc.
On storing discs
* Do not store discs in a place subject to direct sunlight
or near heat sources.
* Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
* Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
Structure of disc contents
Normaily, DVD video discs are divided into titles, and the
tities are sub-divided into chapters. Video CDs and Audio
CDs are divided into tracks.
DVD
DVD
Title 1 — > Title 2
Chapter 1 Chapter 2/Chapter 1 Chapter 2Chapter 3
| | | | |
[eo RE +:
Video CD/Audio CD
Video CD/Audio CD
\ ft À onl]
AN re
ve 1 UT 2 va 3 T 4 Ш 5
NE Mame les A | [a
Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively. There may be discs that do not
have these numbers.
Notes on copyright
The unauthorized recording, use, distribution, or revision
of copyrighted materials including, without limitation,
television programs, videotapes, and DVDs, is prohibited
under the Copyright Laws of the United States and other
countries, and may subject you to civil and criminal
lability.
About this owner’s manual
This owner's manual explains the basic instructions of
this TV/DVD. Some DVD video discs are produced in a
manner that allows specific or limited operation during
playback. As such, the TV/DVD may not respond to all
operating command. This is not a defect of the TV/DVD.
Refer to the instruction notes of discs.
The following symbol may appear on the TV screen
during operation.
X )
It means that the operation is not permitted by the TV/
DVD or the disc. For example, sometimes it is unable to
stop the playback of copyright message of the disc when
the Stop bution is pressed. Alternatively, this symbol
may also indicate that the feature is not available for the
disc.
Notes on region numbers
The region number of this TV/DVD is 1. If region
numbers, which stand for their playable area, are printed
on your DVD and you do not find & or @, disc playback
will not be allowed by the player. {In this case, the TV/
DVD will display a message on-screen.). Some DVDs
that have no region code label may still be subject to
area restrictions and therefore not playable.
On Video CDs
This TV/DVD supports Video CDs equipped with the
Playback Control (PBC) function, version 2.0. You can
enjoy two playback variations depending on types of
discs.
* Video CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this TV/DVD in
the same way as a DVD.
* Video CD equipped with PBC function
(Version 2.0)
In addition to operation of a Video CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
on-screen playback menu. Some of the functions
described in this owner's manual may not work with
some discs.
Playable discs
This TV/DVD can play the following discs.
Disc Contents Disc Maximum
mark size | playback time
Approx. 4 hours
single sided disc
12m (single sided disc)
Audio Approx. 8 hours
DVD + {double sided disc)
Video | » | Video Approx. 80 minutes
disc | viDeo | (moving (single sided disc)
pictures) | 8 cm Approx. 160
minutes
(double sided disc)
Audio Approx. 74 minutes
Video ОЛЕГ + [20M] (single sided disc)
cD ISE Video
DIGITAL VIBEO) | (moving | g Approx. 20 minutes
em |.
pictures) (single sided disc)
Approx. 74 minutes
12 em] (single sided disc)
Audio ISE Audio
cb DIGITAL AURIO 8 cm Approx. 20 minutes
(single sided disc)
The following discs are also supported.
+ DVD-R/RW discs containing files of DVD video
format.
+ CD-R/CD-RW discs containing CD-DA, Video CD,
MP3, WMA, or JPEG files.
+ Kodak Picture CD and FUJICOLOR CD.
Some of these discs may be incompatible.
* You cannot play discs other than those listed above.
* You cannot play discs of DVD-RAM, DVD-ROM, CD-
ROM, Photo CD, etc., or non-standardized discs even
if they may be labeled as above.
+ Some CD-R/RWs cannot be played back depending
on the recording conditions.
* This TV/DVD uses the NTSC color system, and
cannot play DVD video discs recorded in any other
color system (PAL, SECAM, etc.).
* This TV/DVD can play an 8 cm disc. Please do not
use a disc adapter. lí may cause trouble.
* Please do notinsert any disc of an irregular shape into
the TV/DVD, as it may interfere with the function of the
TV/DVD. You may not be able to remove it.
* Please do not use after market accessories, such as
a ring protector, as this may cause trouble with the
operation of the TV/DVD.
Because of problems and errors that can occur during
the creation of DVD and CD software and/or the
manufacture of DVD and CD discs, Toshiba cannot
assure that this TV/DVD will successfully play every disc
bearing the DVD and CD logos. If you happen to
experience any difficulty playing a DVD or CD on this TV/
DVD, please contact Toshiba Customer Service.
is a trademark of DVD Format/Logo Licensing
Corporation.
The Toshiba 15CV100U, 15CV101U, 19CV100U,
22CV100U, 26CV100U and 32CV100U LCD TV/
DVD combinations comply with Part 15 of the FCC
ruies. Operation 1s subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received,
including mterference that may cause undesired operation.
The party responsible for compliance to these rules 1s:
Toshiba America Consumer Products, L.L.C.
82 Totowa Rd. Wayne, NJ 07470.
Ph: 1-800-631-3811
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 ofthe FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by removing and
applying power to the equipment, the user is
encouraged to try to correct the interference by one
or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and the
receiver,
* Connect the equipment into an outlet on a circuit
different from that to which the receiver 1s connected.
* Consult the dealer or an experienced radio, TV
technician for help.
Caution: Changes or modifications to this eguipment
not expressly approved by Toshiba could void the
users authority to operate this equipment.
ENERGY STAR User Information Statement: the factory
default settings of this television meet ENERGY STAR?
requirements. Enabling or changing certain features and
functionality (e.g. Picture Settings) may increase energy
consumption, possibly beyond the limits required for
ENERGY STAR qualification.
To ensure your television 1s operating at optimal energy
efficiency, select [Home] mode during initial activation.
ENERGY STAR® qualified TV. Products that
earn the ENERGY STAR prevent green house
gas emissions by meeting strict guidelines set
by the U.S. Environmental Protection Agency.
ENERGY STAR and the ENERGY STAR mark
are registered U.S. marks.
The following symptoms are technical limitations of
LCD Display technology and are not an indication of
malfunction; therefore, Toshiba is not responsible for
perceived issues resulting from these symptoms.
1) An afterimage (ghost) may appear on the screen if a
fixed, non-moving image 1s displayed for a long
period of time. The afterimage is not permanent and
will disappear mn a short period of time.
2) The LCD panel contamed in this TV 1s manufactured
using an extremely high level of precision technology;
however, there may be an occasional pixel (dot of
light) that does not operate properly (does not light,
remains constantly lit, ete.). This 1s a structural
property of LCD technology, 1s not a sign of
malfunction, and 1s not covered under your warranty.
Such pixels are not visible when the picture 1s viewed
from a normal viewing distance.
CLASS 1
LASER PRODUCT
CERTIFICATION: COMPLIES WITH FDA
PERFORMANCE STANDARDS FOR LASER
PRODUCTS EXCEPT FOR DEVIATIONS
PURSUANT TO LASER NOTICE NO.50, DATED
JUNE 24, 2007.
CAUTION:
- THIS PRODUCT EMPLOYS A LASER SYSTEM.
- TO ENSURE PROPER USE OF THIS PRODUCT,
PLEASE READ THIS OWNER'S MANUAL
CAREFULLY AND RETAIN FOR FUTURE
REFERENCE.
- SHALL THE UNIT REQUIRE MAINTENANCE,
CONTACT AN AUTHORIZED SERVICE CENTER.
- USE OF CONTROLS, ADJUSTMENTS OR THE
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
- TO PREVENT DIRECT EXPOSURE TO LASER
BEAM, DO NOT TRY TO OPEN THE
ENCLOSURE. VISIBLE LASER RADIATION
WHEN OPEN. DO NOT STARE INTO BEAM.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
QSound Labs, Inc.
Manufactured under license under U.S. Patent #:
5,451,942 & other U.S. and worldwide patents
issued & pending. DTS and the Symbol are
registered trademarks and DTS Digital Out and the
DTS logos are trademarks of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
important Safety instructions .................—.m.—..—... 3
installation, Care, and Service ............2e.eeeevezneza 3
Choosing a location for your LCD TV ............... 5
Notes on discs vivir rea 7
Chapter 1: Introduction ...................e. 2.222... 12
Features of your new TV ee... 12
Overview of steps for installing, setting up,
and using your new TV i. 12
TV front, top and side panel controls and
CONNECtIONS .................rcasreccrara seras e nn rare 43
TV back panel connections ....................... 16
Chapter 2: Connecting your TV ue 47
Overview of cable types esse 17
About the connection illustrations ............ 17
Connecting TV to a power source .......... 17
Connecting a VCR, and antenna, Cable TV .18
Connecting a camcorder oo e... 18
Connecting a DVD player with ColorStream®
(component video) ................. e... 19
Connecting a satellite receiver ..................... 19
Connecting an HDMI or DVI device to the
HDMI™ input «en, 20
REGZA-LINK® connection 21
Connecting a digital audio system ............... 22
Connecting a personal computer (PC) ......... 23
Chapter 3: Using the remote control ............... 24
Preparing the remote control for use ............ 24
Installing the remote control batteries .......... 24
Learning about the remote control ............... 25
Chapter 4: Menu layout and navigation .......... 27
Main menu layout …….…..….…..…rscrrseressaccsan ne 27
Setup/Installation menu layout .................... 27
Navigating the menu system ....................... 27
Chapter 5: Settingup your TV ...................... 28
Initial Setup... een RR RR R KR REEREEG 28
Selecting the menu language ...................... 28
Configuring the antenna input source for the
ANT/CABLE terminal... 28
Programming channels into the TV's
channel memory ................ 2er 29
Programming channels automatically ...29
Programming channels manually .......... 29
Labeling channels al 30
Setting the HDMI™ audio mode .................. 31
Viewing the digital signal meter .................... 32
Setting the Time Zone... 32
Viewing the system status 32
Reset Factory Defaults crues 32
Chapter 6: Using the TV's features ................. 33
Selecting the video input source to view ...... 33
Labeling the video input sources ................. 33
Tuning channels RAR 34
Setting the Channel Tuning Mode ......... 34
10
Tuning to the next programmed
channel ci reee 34
Tuning to a specific channel
(programmed or unprogrammed) .......... 35
Switching between two channels using
Channel Return eee 35
Selecting the picture size 35
Scrolling the TheaterWide? picture
(TheaterWide 2 and 3 only) ................ 37
Using the auto aspect ratio feature ............. 37
Selecting the cinema mode ................. 37
Adjusting the picture .................... 2... 38
Selecting the picture mode .................... 38
Adjusting the picture quality .................. 38
Using the closed caption mode .................... 39
Base closed captions... 39
Digital CC Settings ee... 39
CC Selector oii, 40
Adjusting the audio... e... 40
Muting the sound... e... 40
Using the digital audio selector ............. 40
Selecting stereo/SAP broadcasts .......... 40
Adjusting the audio quality .................... 41
Selecting the optical audio output
format erre 41
Using the Dolby® Digital Dynamic
Range Control feature ......................... 42
Using the Locks menu... 2... 42
Entering the PIN code 42
If you cannot remember your
PIN code ........... eee KK 42
Changing your PIN code ....................... 42
Blocking TV programs and movies
Бу гайпа (М-СТр) „неее 43
Downloading an additional rating system
for blocking TV programs and movies ...43
Unlocking programs temporarily ........... 44
Using the input lock feature .................. 45
Using the GameTimer® oi) 45
Using the control panel lock feature ...... 45
Using the PC settings feature ...................... 46
Setting the PC Audio... e... 46
Setting the sleep timer eee 47
Using REGZA-LINKO enn 47
REGZA-LINK® playback device
(DVD player, etc.) control ...................... 47
REGZA-LINK® Player Control menu
fUNCtIONS ............unsarrseraracar esse a sera encens 48
REGZA-LINK® input source selection. 48
VOLUME and MUTE controls of
Audio Receiver o.oo nee 48
Other REGZA-LINK® functions ............. 48
Displaying TV status information ................. 49
Understanding the auto power off feature... 49
Understanding the last mode memory
feature oo Ree
Chapter 7: Using the TV's advanced
features rrr
Using the advanced picture settings
features o.oo e KKE RER E RER KAE KEN
Using dynamic contrasSt see
Using the static gamma feature ............
Selecting the color temperature ............
Using CableClear® digital noise
reduction... R KK KE ERDE KEG
Using MPEG noise reduction
Using the Game Mode feature ..............
Using the Auto Brightness Sensor ...............
Using the advanced audio settings
EEE
Using the QSound? sound feature ........
Using the Media Player 2...
Media Player Specifications ..................
Basic Operation...
Viewing JPEG files 2...
Listening to MP3 files...
Chapter 8: Basic disc playback ......................
Disc playback .................. riera
Basic playback (DVD/VCD/CD) ............
Removing a disc cocoon.
Disc playback reminders .......................
Playback navigation ...........e.. eee es
Playing in fast reverse or fast forward
direction (DVD/VCD/CD) ......................
Playing frame by frame (DVD/VCD) .....
Playing in slow motion (DVD/VCD) .......
Locating a chapter or track (DVD/
VCD/CD) oo,
Chapter 9: Advanced disc playback ...............
Zoom function/Scene navigation .................
Using Zoom (DVD/VCD) „ен.
Locating a specific scene (DVD/
VCD/CD) oo,
Scene bookmark EEE EKE EN
Bookmarking a scene (DVD/
VCD/CD) O
Viewing a scene bookmark (DVD/
VCD/CD) ce ee ece era nra anses rase rene
Repeat playback/A-B repeat ........................
Enabling repeat playback (DVD/VCD)...
Enabling A-B repeat mode (DVD/
VCD/CD) oc
Programmed playback/Random playback ...
Programming the playback sequence
(VCD) O
Enabling random playback (VCD) .........
Scene angle/Title selection/DVD menu .......
Changing the scene angle (DVD) .........
Selecting a DVD title (DVD) ........
DVD menu (DVD) oo es 62
Soundtrack language/Audio channel/
Subtitle ce cena eesse an een nee rene ns ce nen eee ane 63
Selecting a soundtrack language
(DVD) cree ce cesr ane ca rns aan sen cena 63
Selecting the audio channel (VCD) ....... 63
Viewing subtitles (DVD) ........... 63
Playback information/VCD playback
CONtrol eerereereerr eK ERE RER KR KR RKEERSRKERERE RER 63
Viewing the playback info (DVD/VCD)... 63
Turning off the PBC function (VCD) ...... 64
MP3, WMA, JPEG, and Audio CD
operation oo, 65
MP3/WMA/JPEG/Audio CD information
(СВ) ...нннкннннннннееененееннененнененыннннненненнненнео 65
About the file browser (CD) .................. 66
Playing an audio file (CD) ..................... 66
Viewing a JPEG file (CD)... 67
Viewing a slide show (CD) 67
MP3, WMA, JPEG and Audio CD
playback modes ................... 22222 68
Enabling repeat playback (CD) ............ 68
Enabling random playback (CD) ........... 68
Programming the playback sequence
(CD) ….......eLcecraea ar ns canne r acer a sara rennes 69
Chapter 10: Customizing disc playback ......... 70
Customizing disc playback ......................... 70
Configuring the disc playback settings
(DVD/VCD/CD) oi es 70
Disc playback setup es 71
Chapter 11: Troubleshooting ....................... 75
General troubleshooting esse 75
LED Indication eee ras 77
Chapter 12: AppendiX cocci, 78
Specifications... ie EHE 78
Acceptable signal formats for PC IN and
HDMi terminals ................... me 79
Limited United States Warranty LCD TV/DVD
Combination — Depot Repair Warranty ........ 80
The GNU General Public License (GPL) ..... 82
The Libpng License Notices ........................ 85
The zlib License coi. 86
11
Features of your new TV
The following are just a few of the many exciting
features of vour new Toshiba integrated HD, LCD
TV/DVD:
* Integrated digital tuning (8VSB ATSC and
QAM) eliminates the need for a separate digital
converter set-top box (in most cases).
* 1080p output resolution
« Two HDMI = digital, high-definition multimedia
interfaces with 1080p input support (er Page 20).
+ HDMI capabilities
* Lip-Synec feature activates an auto audio/video
display timing adjustment function that allows
HDMI source devices to accurately perform
synchronization automatically.
« REGZA-LINK® allows control of external
devices from the TV remote control via HDMI
connection (1= Page 47).
* ColorStream” HD high-resolution component
video input (1 Page 19).
* QSound” audio technologies (15 Page 52).
* Digital Audio Out optical audio connection with
Dolby” Digital optical output format (es- Page
22). |
* CableClear” digital picture noise reduction (1
Page 51).
+ PC IN (Analog RGB) computer termina! (e
Page 23).
* Channel Labeling aliows you to put the Cali
Letters (e.g. ABC, HBO, ¢tc.) on the screen along
with the station numbers, so you always know
what you're watching (5° Page 30).
* Media Player allows you to view your JPEG
pictures and listen to MP3 music (15° Page 52).
ENERGY STAR® qualified
12
Overview of steps for installing,
setting up, and using your new
Follow these steps to set up your TV and begin
using 1ts many exciting features.
1 Observe the following when choosing a
location for the TV:
* Read “Important notes about your LCD TV”
(15° Page 9).
+ Place the TV in a proper location (82° Page 2-
5)
2 Do not plug in any power cords until AFTER
you have connected all cables and devices to
your TV.
3 BEFORE connecting cables or devices to the
TV, learn the functions of the TV”s connections
and controls (#7 Page 13-16).
4 Connect your other electronic device(s) to the
TV (ur Page 17-23).
5 See “Chapter 3: Using the remote control” (t@
Page 24) for an overview of the buttons on the
remote control, install the batteries and prepare
to operate vour other device(s).
6 AFTER connecting all cables and devices, plug
in the power cords for your TV and other
devices.
Note: After you turn on the TV, the Initial
Setup menu appears automatically by
default.
7 Sec “Chapter 4: Menu layout and navigation”
for a quick overview of navigating the TV's
menu system (es Page 27).
8 Program channels into the TV’s channel
memory (65° Page 29).
9 For details on using the TV's features, see
Chapters 6 and 7.
10 For details on disc playback, sec Chapter $ and
9.
11 For help, refer to the Troubleshooting Guide,
see Chapter 11.
12 For technical specifications and warranty
information, see Chapter 12.
TV front, top and side panel controls and connections
15CV100U/15CV101U
Power LED — This indicates the TV's status.
See “LED indication” on Page 77 for
additional information.
Remote sensor (embedded) — Point the
remote contro! toward this remote sensor.
Effective
range:
16.4 ft (5m)
Auto Brightness Sensor — This sensor
will detect the ambient light conditions to
optimize the backlighting levels. See “Using
the Auto Brightness Sensor”on Page 51 for
additional information.
Disc slot — Load the disc into the disc slot
to view or listen.
HDMI 2 — High-Definition Multimedia
Interface (HDMI 2) input receives digital
audio and uncompressed digital video from an
HDMI device or uncompressed digital video
trom a DVI device. HDMI connection 15
necessary to receive 1080p signals.
USB terminal — For use when inserting a
USB device.
Headphone jack — For use when inserting
a stereo headphone (not supplied) with a 1/8-
inch (3.5 mm) mini plug.
Note: Connecting a headphone to the TV/
DVD will mute the sound from the built-in
speakers.
— 7
10
11
12
13
14
INPUT/ MENU STOP PLAY
в >
EER, a 7
Hl HI ad ff 1e il
| VV EL >
trar A = - = =
> ENTER
POWER — Press to turn the TV on and off.
If the TV stops responding to the controls on
the remote control or TV control panel and
you cannot turn off the TV, press and hold the
POWER button on the TV control panel for
5 or more seconds to reset the TV.
INPUT/ENTER — Repeatedly press to
change the source you are viewing (ANT/
CABLE, Video, ColorStream HD, HDMI
1, HDMI 2, PC, DVD) When a menu 1s on-
screen, the INPUT button on the TV's control
panel functions as the ENTER button.
MENU — Press to access the menu system
(Es Page 27).
STOP/CHANNEL — Press to stop the
disc playback in DVD mode; press to change
the channel in TV mode.
ARROW — When a menu 1s on-screen, the
button functions as down menu navigation
button.
PLAY/CHANNEL ~~ — Press to play the
disc in DVD mode; press to change the
channel in TV mode.
ARROW ~~ — When a menu 1s on-screen,
the button functions as up menu navigation
button.
VOLUME+/- — These buttons adjust the
volume level.
EJECT — Press to eject the disc.
13
19CV100U/22CV100U/26CV100U/32CV100U
1 Power LED — This indicates the TV's
status.
See “LED indication” on Page 77 for
additional information.
2 Remote sensor — Point the remote control
toward this remote sensor.
Effective
range:
16.4 ft (5m)
3 Auto Brightness Sensor — This sensor
will detect the ambient light conditions to
optimize the backlighting levels. See “Using
the Auto Brightness Sensor” on Page 51 for
additional information.
Note: 22CV100U is used for illustration
purposes.
14
19CV100U/22CV100U
No
O 4 E DH WwW
O POWER
Disc slot — Load the disc into the disc slot to
view or listen.
EJECT — Press to eject the disc.
VOLUME+/- — These buttons adjust the
volume level.
PLAY/CHANNEL ~ — Press to play the
disc in DVD mode; press to change the
channel in TV mode.
ARROW ~~ — When a menu 1s on-screen,
the button functions as up menu navigation
button.
STOP/CHANNEL — Press to stop the
disc playback in DVD mode; press to change
the channel in TV mode.
ARROW ~~ — When a menu 1s on-screen,
the button functions as down menu navigation
button.
MENU — Press to access the menu system
(13 Page 27).
INPUT/ENTER — Repeatedly press to
change the source vou are viewing (ANT/
CABLE, Video, ColorStream HD, HDMI
1. HDMI 2, PC, DVD). When a menu 1s on-
screen, the INPUT button on the TV's control
panel functions as the ENTER button.
POWER — Press to turn the TV on and off If
the TV stops responding to the controls on the
remote control or TV control panel and vou
cannot turn off the TV, press and hold the
POWER button on the TV control panel for 5
or more seconds to reset the TV.
26CV100U/32CV100U
10
11
o ~~ Ma bh 0
O POWER
HDMI 2 — High-Definition Multimedia
Interface (HDMI 2) mput receives digital
audio and uncompressed digital video from
an HDMI device or uncompressed digital
video from a DVI device. HDMI connection
1s necessary to receive 1080p signals.
USB terminal — For use when inserting a
USB device.
Headphone jack — For use when inserting
a stereo headphone (not supplied) with a 1/8-
inch (3.5 mm) mini plug.
Note: Connecting a headphone to the
TV/DVD will mute the sound from the
built-in speakers.
Note: 22CV100U and 26CV100U are used for
illustration purposes.
Adjusting the screen angle
(Applicable to 19CV100U/22CV100U)
You can adjust the angle of the TV screen 3°
torward or 15° backward from a vertical angle.
Hold the base of the TV while adjusting the screen.
TT 3
Ад
Some illustrations in this owner’s manual
are for explanation purposes and may
differ from the actual unit.
15
TV back panel connections
AC input jack — Connect one end of the
supplied AC power cord into the TV's AC
input jack and the other to a power outlet to
turn on and operate the TV.
AUDIO/COLOR STREAM HD —
ColorStream” high-definition component
video inputs (with standard stereo audio
inputs) for connecting devices with
component video output, such as a Toshiba
DVD player with ColorStream®.
Note: Component video cables carry only
video information, separate audio cables
are required for a complete connection.
AUDIO/VIDEO — Standard (composite)
video and standard audio inputs plus for
connecting devices with composite video.
Note: Standard (composite) video cables
carry only video information, separate
audio cables are required for a complete
connection.
DIGITAL AUDIO OUT — Optical audio
output in Dolby Digital or PCM (Puise-Code
Modulation) format for connecting an external
Dolby Digital decoder, amplifier, or home
theater system with optical audio input.
HDMI 1/PC AUDIO IN — PC audio input
terminal 1s shared with HDMI 1 analog audio
input terminal, and 1ts use can be configured
in the Audio Setup menu (tr Page 46).
PC IN — For use when connecting a personal
computer.
16
For an explanation of cable types and connections see Page 17-23.
|
=
Mi 7
со
7 HDMI 1 — High-Definition Multimedia
Interface (HDMI 1) input receives digital
audio and uncompressed digital video from an
HDMI device or uncompressed digital video
from a DVI device. Also see item 5. HDMI
connection 15 necessary to receive 1080p
signals.
8 TUNER (ANT/CABLE) — Input that
supports analog (NTSC) and digital (ATSC)
off-air antenna signals and analog and digital
Cable TV (QAM) signals.
Note: 22CV100U is used for illustraion
purposes.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby
Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
Overview of cable types
Cables can be purchased trom most stores that sell
audio/video devices. Before purchasing any
cables, be sure of connector types required by your
devices and the length of each cable.
Coaxial (F-type) cable
Fa, 7 =
Coaxial (F-type) cable 1s used for connecting your
antenna, cable TV service, and/or cable converter
box to the TUNER input on your TV.
Standard A/V cables (red/white/yellow)
© ег
Standard A/V cables (composite video) usually
come in sets of three and are for use with video
devices with analog audio and composite video
output. These cables (and the related inputs on
your TV) are typically color-coded according to
use: yellow tor video, red for stereo right audio,
and white for stereo left (or mono) audio.
Component video cables (red/green/blue)
Component video cables come 1n sets of three and
are for use WIth video devices with component
video output. (ColorStream® is Toshiba’s brand of
component video.) These cables are typically
color-coded red, green, and blue. Separate audio
cables are required for a complete connection.
Note: Component video cables provide better
picture performance than a standard
(composite) video.
HDMI™ cable (with HDMI Logo sm)
HDMI (High-Detinition Multimedia Interface)
cable 1s tor use with devices with an HDMI output.
An HDMI cable delivers digital audio and video in
1ts native format. This cable carries both video and
audio information; therefore, separate audio cables
are not required for a complete HDMI device
connection (83 Page 20, 21 and 23).
Note: An HDMI cable provides the best audio
and picture performance.
Optical audio cable
ID -
Optical audio cable 1s for connecting receivers
with Dolby Digital or PCM (Pulse-Code
Modulation) optical audio input to the TV's
DIGITAL AUDIO OUT terminal (ts Page 22).
Analog RGB (15-pin) computer cable
Analog RGB (15-pin) computer cable 1s for
connecting a PC to the TV’s PC IN terminal (8
Page 23).
Note: Separate audio cables are required for
a complete connection.
About the connection illustrations
You can connect different types and brands of
devices to your TV in several different
configurations. The connection illustrations mn this
manual are representative of typical device
connections only. The mput/output terminals on
your devices may ditfer from those illustrated
herein. For details on connecting and using your
specific devices, refer to each device's owner's
manual.
Connecting TV to a power source
To connect AC power:
Connect the AC cord plug into the TV/DVD's AC
input jack and then connect the AC cord into an
AC outlet.
120 V, 60 Hz
outlet
SF
Li |
KA
— AC cord (supplied)
Notes:
* Never connect the AC cord plug to other
than the specified voltage (120 V, 60 Hz).
Use the supplied power cord only.
* [fyou cause a static discharge when touching
the TV/DVD and it fails to function, simply
unplug the TV/DVD from the AC outlet and plug
it back in. The TV/DVD should return to normal
operation.
17
Connecting a VCR, and antenna,
Cable TV
From Cable TV |
From Cabie TV y
or antenna À
Cable box
Stereo VCR 0
VIDEO AUDIO
ER
TV back panel
Standard
AN cable
You will need:
* coaxial cables
* standard A/V cables
Note: When you use a Cable box, you may
not be able to use the remote control to
program or access certain features on the TV.
To view the antenna or Cable signal:
Select the ANT/CABLE video input source on the
TV"
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT/CABLE
video input source on the TV.* Tune the TV to
channel 3 or 4 (whichever channel the Cable box
output 1s set to). Use the Cable box controls to
change channels.
To view the VCR:
Turn ON the VCR. Select the Video video input
source on the TV.*
* To select the video input source, press 2 on the
remote control (E Page 33).
18
Camcorder
TV back panel
You will need:
* standard A/V cables
To view the camcorder video:
Select the Video video input source on the TV.*
* To select the video input source, press бон on the
remote control (155° Page 33).
The unauthorized recording, use, distribution, or
revision of television programs, videotapes,
DVDs, and other materials is prohibited under the
Copyright Laws of the United States and other
countries, and may subject you to civil and
criminal liability.
Connecting a DVD player with
ColorStream® (component video)
AUDIO
our
У, Ped. Pad т В de While
Fa a GES ON Е т /
COMPONENT VIDEO $-VÍIDEO VIDE E red >
OUT" OUT ©
DVD player with pe
component video
You will need:
* standard audio cables
* component video cables
— You can connect the component video
cables (plus audio cables) from the DVD
player to the COLOR STREAM HD
terminal on the TV. The COLOR
STREAM HD terminal can be used to
display Progressive (480p, 720p) and
Interlaced (480i, 10801). Please check the
Owner's Manual of the DVD player in
order to determine the best output signal
available.
— If your DVD player does not have
component video, connect a standard A/V
cable to AUDIO/VIDEO terminal. Tf your
DVD player has HDMI video, see Page
20.
To view the DVD player:
Turn ON the DVD player. Select the
ColorStream HD video input source on the TV.*
* To select the video input source, press o on the
remote control (E Page 33).
Connecting a satellite receiver
From sateilite dish
y YA Pod Pp
O 600!
que =
Satelite COMPONENT VIDEO sine VIDEO
IN our OUT
>
ot
Ни
75
©
m
=
O
Satellite receiver with
component video
rooms
HACE A
You will need:
* standard audio cables
* component video cables
- You can connect the component video
cables (plus audio cables) from the
satellite receiver to the COLOR STREAM
HD terminal on the TV. The COLOR
STREAM HD terminal can be used to
display Progressive (480p, 720p) and
Interlaced (4801, 10801). Please check the
Owner's Manual of the satellite receiver
in order to determine the best output
signal available.
— If your satellite receiver does not have
component video, connect a standard
A/V cable to AUDIO/VIDEO terminal.
To view satellite programs using the component
video connections:
Turn on the satellite receiver. Select the
ColorStream HD video input source on the TV.*
* To select the video input source, press = on the
remote control (15° Page 33).
The unauthorized recording, use, distribution, or
revision of television programs, videotapes,
DVDs, and other materials is prohibited under the
Copyright Laws of the United States and other
countries, and may subject you to civil and
criminal liability.
19
Connecting an HDMI or DVI
device to the HDMI™ input
The HDMI input on your TV receives digital audio
and uncompressed digital video from an HDMI
source device, or uncompressed digital video from
a DVI (Digital Visual Interface) source device.
This input 1s designed to accept HDCP (High-
Bandwidth Digitai-Content Protection) program
material in digital form from EIA/CEA-861-E
compliant!!! consumer electronic devices (such as
a set-top box or DVD piayer with HDMI or DVI
output). The HDMI input can accept and display
VGA, SVGA, XGA, WXGA, 4801 (60 Hz), 480p
(60 Hz), 720p (60 Hz), 10801 (60 Hz), and 1080p
(24 Hz/30 Hz/60 Hz) signal formats. For detailed
signal specifications, sec Page 79. Supported
Audio format: Linear PCM, sampling rate 32/44.1/
48 kHz.
Note: To connect a PC to the HDMI input, see
Page 23.
To connect an HDMI device, you will need:
* one HDMI cable per HDMI device
— For proper operation, it is recommended
that you use an HDMI cable with the
HDMI Logo (Hifi),
— To display a 1080p/60 Hz signal format,
you will need a High Speed HDMI cable.
Conventional HDMI/DVI cable may not
work propetly.
— HDMI cable transfers both video and
audio. Separate analog audio cables are
hot required (see illustration).
— See “Setting the HDMI™ audio mode”
(wz Page 31).
TV back panel TV left side panel
HDMI device
vipgo — PUDIO
© ©
20
To view the HDMI device video:
Select the HDMI 1 or HDMI 2 video input source
on the TV.*
* To select the video input source, press oo on the
remote control (05° Раде 33).
То connect a DVI device, you will need:
* one HDMI-to-DVI adapter cable
— For proper operation, the length of an
HDMi-to-DVI adapter cable should not
exceed 9.8 ft (3m). The recommended
length is 6.6 ft (2m).
* one pair of standard analog audio cables per DVI
device.
— An HDMI-to-DVI adapter cable transfers
video only. Make sure to connect this
cable to the HDMI 1 input on the TV.
Separate analog audio cables are
required (see illustration).
— See “Setting the HDMI™ audio mode” (x
Page 31).
TV back panel
a DVI device
ADVI HOE
our
(TC Epa
oA or
Кн
Note: To ensure that the HDMI or DVI device
is reset properly, it is recommended that you
follow these procedures:
* When turning on your electronic
components, turn on the TV first and then
the HDMI or DVI device.
* When turning off your electronic
components, turn off the HDMI or DVI
device first and then the TV.
[1] EIA/CEA-861-E compliance covers the
transmission of uncompressed digital video with
high-bandwidth digital content protection, which
is being standardized for reception of high-
definition video signals. Because this is an
evolving technology, it is possible that some
devices may not operate properly with the TV.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
REGZA-LINK® connection
You can control the basic functions of connected audio/video devices using the TV's remote control if you
connect a REGZA-LINK® compatible audio receiver or playback device. For an explanation of setup and
operations, see Page 47-49.
TV back panel
TV left side panel
UDIO
я
i e
“a METI
ari OUT
Playback device
{REGZA-LINK® DVD player,etc.)
To connect an audio receiver and playback
devices, you will need:
Note:
+ [f several devices are connected, REGZA-
LINK® feature may not operate properly.
* For proper operation, it is recommended
that you use HDMI cables with the HDMI
Logo (Hu).
Playback device
(REGZA-LINK® DVD player,etc.)
Before controlling the device(s):
» After completing the above connections, set the
REGZA-LINK Setup menu as you desire (555°
Page 49).
* The connected devices must also be set. For
details, see the operation manual for each device.
* The REGZA-LINK® feature uses the CEC
technology as regulated by the HDMI standard.
* This feature is limited to models Incorporating
Toshiba's REGZA-LINK®. However, Toshiba is
not liable for those operations. Refer to the
individual instruction manuals for compatibility
information.
Note: This feature may not work properly
depending on the devices that are connected.
21
Connecting a digital audio
system
The TV's DIGITAL AUDIO OUT terminal
outputs a Dolby** Digital 29042 or 2-channel
down-mixed PCM (Pulse-Code Modulation)
signal for use with an external Dolby® Digital
decoder or other external audio system with
optical audio input.
If vou have a DTS* sya0a decoder or processor, you
can obtain the full benefit of 5.1 channel DTS
encoded soundtracks on DVDs and audio CDs.
You will need:
* optical audio cable (Use an optical audio cable
that has the larger “TosLink” connector and not
the smaller “mini-optical” connector.)
Dolby Digital decoder or
O other digital audio system O
O) | UNEIN Dpto | ( )
To control the audio:
1 Turn on the TV and the digital audio device.
2 Press st on the remote control and open the
Sound menu.
3 Press À or Ÿ to select Audio Setup and then
и ny
press e.
4 Press 4 or ¥ to select Optical Output
Format.
22
5 Press dor № to select either Dolby Digital or
PCM, depending on your device.
(1 “Selecting the optical audio output format”
on Page 41).
6 To save the new settings, highlight Done and
then press em),
To revert to the factory defaults, highlight
Reset and then press =.
Note:
* Some audio systems may not be compatible
with Dolby Digital bitstream signals. Older
audio systems that are not compatible with
standard optical out signals may not work
properly, creating a high noise level that
may damage speakers or headphones.
THIS DAMAGE 1S NOT COVERED BY
YOUR WARRANTY.
The DIGITAL AUDIO OUT terminal may not
output some digital audio sources because
of copy restrictions.
* Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #:
5,451,942 & other U.S. and worldwide patents
issued & pending. DTS and the Symbol are
registered trademarks and DTS Digital Out and
the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights
Reserved.
xx
Connecting a personal computer
(PC)
With either the PC IN or HDMI connection, you
can watch vour computer’s display on the TV and
hear the sound from the TV’s speakers.
To connect a PC to the PC IN terminal on the
TV:
When connecting a PC to the PC IN terminal on
the TV, use an analog RGB (15-pin) computer
cable and a PC audio cable.
TV back panel
PC audio
cable
Computer ,
PC audio
output
Conversion adapter
(if necessary)
+ To use a PC, set the monitor output resolution on
the PC before connecting 1t to the TV. The PC IN
terminal can accept and display VGA, SVGA,
XGA, and WXGA signal formats. For detailed
signal specifications, see Page 79.
* To display the optimum picture, use the PC
settings feature (ur “Using the PC settings
feature” on Page 46).
Note:
* The PC audio input terminal on the TV is
shared with the HDMI 1 analog audio input
terminal.
* Some PC models cannot be connected to
this TV.
* Anadapteris not needed for computers with
a compatible mini D-sub15-pin terminal.
Depending on the DVD's title and the
specifications of the PC on which you are
playing the DVD-Video, some scenes may
be skipped or you may not be able to pause
during multi-angle scenes.
names for mini D-sub 1 in connector
R 6 Ground | Reserved
G 7 Ground В SDA
B 8
Reserved 19
5 Ground 10 Ground 15 SCL
Ground 3 H-sync
sv ; V-sync
To connect a PC to the HDMI terminal on the
TV:
When connecting a PC to the HDMI terminal on
the TV, use an adapter cable and analog audio
cables.
If connecting a PC with an HDMI terminal, use an
HDMI cable. Separate analog cables are not
necessary (1% Page 17).
TV back panel
Computer
The HDMI input can accept and display VGA,
SVGA, XGA, WXGA, 4801 (60 Hz), 480p (60
Hz), 720p (60 Hz), 10801 (60 Hz), and 1080p (24
Hz/30 Hz/60 Hz) signal formats. For detailed
signal specifications, see Page 79.
Note:
The edges of the images may be hidden.
* [freceiving a 480i (HDMI), 480p (HDMI),
720p, 10801, or 1080p signal program,
Native mode scales the video to display the
entire picture within the borders of the
screen (Le. no overscanning).
23
use
The remote control can operate your TV/DVD and
control the basic functions of connected audio/
video devices if you connect a REGZA-LINK®
compatible audio recerver or playback device
(ES” Page 47).
24
1 Remove the battery cover from the back of the
remote control.
Squeeze tab
and lift cover 7
2 Install two AAA size batteries. Match the + and
— symbols on the batteries to the symbols on
the battery compartment.
3 Close the battery cover on the remote control
until the tab snaps.
Caution: Batteries must not be exposed to
excessive heat such as sunshine, fire or the
like.
Note:
* Be sure to use AAA size batteries.
* Dispose of batteries in a designated
disposal area.
* Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
* /fthe remote control does not operate
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
« When necessary to replace batteries in the
remote control, always replace both
batteries with new ones. Never mix battery
types or use new and used batteries in
combination.
Always remove batteries from the remote
control if they are dead or if the remote
control is not fo be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.
Learning about the remote control
The buttons used for operating the TV/DVD are
described here. For the REGZA-LINK® remote
control functions, see the section “Using REGZA-
LINK*” (tr Page 47).
E
TOSHIBA
Note: The error message “NOT AVAILABLE”
may appear If you press a key for a function
that is not available.
aho N
11
12
13
14
15
16
17
18
19
20
21
22
POWER turns the TV on and off. When the
TV 1s on, the Power LED indicator on the TV
front will be illuminated in green.
SLEEP accesses the sleep timer (155° Page
47).
EJECT ejects the disc from the disc slot.
TV/DVD switches to TV or DVD mode.
Channel Numbers directly tune channels.
JUMP selects or locates a specitic point with
the disc playback (ts Page 59); tunes to a
digital sub-channel as a “dash”.
DISPLAY displays setting or playback
information (E: Page 49, 63).
AUDIO SELECT selects the DVD
soundtrack language or VCD audio channel
(1 Page 63).
VOL + — adjusts the volume level.
CH ~~ cycles through programmed
channels when no menu 1s on-screen (155°
Page 34).
SUBTITLE selects the subtitle language or
switches subtitle off (sz Page 63).
INPUT/ZOOM selects the video input source
(15 Page 33); zooms into the center of the
image during disc playback (es5 Page 59).
PLAY MODE sets the disc playback repeat
mode (er Page 60).
MUTE reduces or turns off the sound (13
Page 40).
DVD MENU accesses the DVD menu (tr
Page 62).
ENTER activates highlighted items 1n the
main menu system.
Arrow buttons (A Y < >) selector
adjust programming menus when a menu 1s
on-screen.
EXIT/CANCEL closes on-screen menus.
MENU/SETUP accesses the main TV menu
system (155° Page 27); configures the disc
playback settmgs (8% Page 70).
PLAY begins playback of the loaded disc (a
Page 56).
PAUSE suspends disc playback temporarily
or plays back disc frame by frame (et Page
56, 57).
STOP stops playback of the loaded disc (s
Page 56).
25
26
DVD MENU
TOSHIBA
w o
14
15
16
17
23
24
25
26
27
28
29
30
31
32
33
34
CLOSED CAPTION/SKIP &#i accesses
the Closed Caption menu (155° Page 39); skips
torward to locate later DVD chapters (e55°
Page 58).
CH RTN/SKIP i<< returns to the last
viewed channel or source (855 Page 35); skips
back to beginning of current DVD chapter or
locate previous chapters (65° Page 58).
FF >> fast-forwards playback of the disc
(ES Page 57).
REV «« fast-reverses playback of the disc
(ES Page 57).
SLOW «i slow-reverses playback of the disc
(ES Page 57).
SLOW I» slow-forwards playback of the
disc (er Page 57).
MARKER bookmarks specific points in the
playback range for later access (8% Page 60).
ANGLE changes the scene angle when
playing back a DVD recorded with multi-
angle scenes (5% Page 62).
REPEAT A-B repeats playback of a specific
section between two set points (825° Page 61).
TOP MENU accesses the top menu of DVDs
that contain two or more titles (es Page 62).
RETURN returns to the root directory in
Audio CD playback (1= Page 66); returns to
previous directory from Media Player sub-
folder or sub-menu (85° Page 53).
GAME displays the Game mode screen when
using the TV as display device tor video
game consoles (8° Page 51).
PIC SIZE cycles through the picture sizes
(ES Page 35).
To open the main menus (illustrated below), press
s% on the remote control or MENU on the TV
control panel.
Picture Mode
Picture Settings 38
Noise Reduction 51
Game Mode 51
Theater Settings 35-37
Sound Audio Settings 41
Advanced Audio Settings 52
Audio Setup 40-42
Preferences CC and Digital Audio 40
— Selectors
— Base CC Mode 39
Digital CC Settings 39
Input Labeling 33
Channel Labeling 30
Menu Language 28
REGZA-LINK Player
Control 48
Locks Enable Rating Blocking — 43
Edit Rating Limits 43
Input Lock 45
Control Panel Lock 45
Game Timer 45
New PIN Code 42
Installation 28-32
REGZA-LINK Setup 49
Steep Timer 47
PC Settings 46
Media Player 53
and System Status menus.
To open the Installation menu (illustrated
below), press sé on the remote control, open the
Setup menu, select Installation, and press =.
Terrestrial Input Configuration 28
Channel Program 29
Channel Options 29
Channel Tuning Mode 34
Time Zone 32
Signal Meter 32
System
Status System Information 32
Navigating the menu system
You can use the buttons on the remote control or
TV control panel to access and navigate your TV's
on-screen menu system.
MENE
* Press # to open the menu.
Мо
+ Press d or P on the remote control to select the
top menu, and its respective items will appear
below.
+ To use the items, press 4 or Y on the remote
control or TV control panel to move up and down
through them. }
Press € or P to adjust settings or press @=) 10
enter the sub-menus.
» All menus close automatically 1f you do not make
a selection within 60 seconds, except the signal
meter menu, which closes automatically after
about 5 minutes.
* To close a menu instantly, press oie.
27
When you first turn on or reset the TV, the Initial
Setup window will appear.
1 In the Menu Language field, press
to select your preferred language.
2 Press 4 or Y to select Time Zone Setup
and set your desired time zone with < or >
and then press “5.
3 Next, the location setting window will appear.
For normal home use, press «or > to select
Home and then press €.
4 Next, ANT/CABLE In setup window will
appear. Press dd or > to select the input source
(Cable or Antenna) for the ANT/CABLE
input on the TV.
5 If vou select Antenna, the Channel Tuning
Mode setup widow will appear. To tune only
digital channels, select Digital. To tune digital
channels preferentially over analog when
entering channel number directly, select Auto.
For normal tuning, select Standard. Press e
to continue to Auto Tuning.
6 Press Em) to select Start Scan and continue
with the Auto Tuning.
4 or >
28
You can choose from three different languages
(English, French and Spanish) for the on-screen
display of menus and messages.
и
+
1 Press st to open the menu.
2 Press dor to highlight Preferences
menu.
3 Press 4 or Y to select Menu Language.
4 Press @ or Bp to select your preferred menu
language.
source for the ANT/CABLE terminal
1 From the Setup menu, press 4 or W
select Installation and then press *=*.
2 Press dor to highlight Terrestrial, and
then press 4 or Ÿ to select Input
Configuration and then press €.
3 Press 4 or Y to highlight ANT/CABLE In
and then press q or > to select the input
source (Cable or Antenna) for the input on
the TV.
4 To save your new settings, highlight Done
and then press &«. To revert to your original
settings, highlight Cancel and then press =.
Programming channels into the
TV's channel memory
When you press (a or ES) on the remote control or
TV control panel, your TV will stop only on the
channels you programmed mto the TV's channel
memory.
Follow the steps below to program channels into
the TV’s channel memory.
Programming channels automatically
Your TV can automatically detect all active
channels in your area and store them 1n 1ts
memory. After the channels are programmed
automatically, you can manually add or skip
individual channels in the channel memory.
Note:
* You must configure the ANT/CABLE input
source before programming channels
(1= Page 28).
* The automatic channel programming
process will erase channels that were
previously programmed into the TV's
memory.
* To tune the TV to a channel not
programmed in the channel memory, you
must use the Channel Number buttons on
the remote control.
* Programming channels when the ANT/
CABLE input is configured for Cable will
fake substantially longer than when the
antenna input is configured for Antenna.
This is normal: however, once channel
programming is finished, you should not
have to repeat the programming process
again unless your Cable TV service lineup
changes significantly.
To program channels automatically:
1 Configure the ANT/CABLE In input if you
have not already done so (65° Page 28).
2 From the Setup menu, press 4 or Y
select Installation and then press Ce),
3 Press dor > to highlight Terrestrial, and
press 4 or Y to select Channel Program
and then press 5.
4 A screen will appear warning that previous
programs and settings will be deleted.
5 Press 6 to start channel programming.
The TV will automatically cycle through all
the channels, and store all active channels in
the channel memory. When Auto Tuning 1s
finished, press a or E to view the
programmed channels.
Programming channels manually
After automatically programming channels into
the channel memory, you can manually
programming individual channels.
To skip channels in the channel memory
To prevent certain channels from being viewed,
channel positions can be skipped.
1 From the Setup menu, press 4 or ¥
select Installation and then press €.
2 Press dor № to highlight Terrestrial, and
press & or Ÿ to select Channel Options
and then press &«. The list of channels will
appear.
3 Press A
skipped and then press @=. A tick will appear in
or Y to select a channel position to be
the box. To remove the tick, press @= again.
4 To save the setting, press cites.
Note: Skipped channels cannot be selected
with (51) or E) ; however, they can still be
accessed using the number keys on the
remote control.
29
To block channels in the channel memory:
You can block specific channels. You will not be
able to tune blocked channels unless you unlock
them.
1 From the Channel Options menu, press >
to move to the channel lock list.
2 Press À or ¥ to select a channel position to
be locked and then press €=. Enter your four-
digit PIN code. A tick will appear in the box.
To remove the tick, press € again.
3 To save the setting, press ia.
To manually add digital subchannels on a
physical channel:
the remote control to enter the channel number
(tor example, 56-1).
If the channel 1s found, the number will be added
to the list.
If the channel 1s not found, a message will appear.
To remove encrypted channels from the
channel memory:
If an encrypted channel 1s accidentally added to
the channel list by programming channels, you can
remove the unwanted encrypted (non-viewable)
channel while you are channel surfing. When you
tunes to an encrypted channel, the following
message will appear.
Digital Channel is Encrypted - Press 1 on remote to remove channel
Press CT) while the message is on the screen to
remove the unnecessary channel from the channel
list.
30
Labeling channels
A list of common channel labels (logos) for
various channels (ABC, CBS, etc.) will be
programmed into the TV. You will be able to view
and assign these logos from the Channel Labeling
window. If the desired channel label 1s not
provided 1n the list, you will be able to manually
enter/edit labels using the software keyboard.
To assign channel labels:
1 TFrom the Preferences menu, press A or
to select Channel Labeling and then press
>.
The Channel Labeling window opens.
2 Press or | to select the channel you want
to label.
3 Pres A Y < b to select the desired
channel label and then press €.
4 Repeat steps 2 and 3 for other channels.
5 To save your settings, highlight Done and
then press €).
Note: The maximum number of labels that
can be stored is 128.
To remove channel labels:
1 Open the Channel Labeling window.
2 Press a) or [e to select the channel for which
you want to remove the label.
3 Pres A Y < № to select {No Label} and
then press €,
Repeat steps 2 and 3 for other channels.
O >
To save your settings, highlight Done and
then press 6=,
To create and assign a custom label:
If the desired channel label 1s not available from
the list of presets, you can create a custom label.
1
2
3
Open the Channel Labeling window.
Press (7) or [2 to select a channel you want to
label.
Press 4 or Y to select Custom and then
press fm,
The software keyboard will appear.
Repeatedly press the corresponding key on the
character on the on-screen software keyboard.
The highlighted character 1s entered after you
either press a different key, press %, or after a
two-second pause.
Repeat steps 4 and 5 until you have entered all
desired text. Press e" when finished.
New labels will be added to the list in
alphabetical order and marked with an icon #
to indicate that they are custom. Highlight the
. и .
new custom label and then press = to assign.
To delete the custom label:
Open the Channel Labeling window.
Highlight the label to be deleted and then press
meta
Highlight Yes trom the deletion confirmation
window and then press és),
To set the HDMI™ audio mode:
1 From the Sound menu, press 4. or W
select Audio Setup and then press €.
2 Press 4 or ¥ to select HDMI 1 Audio and
then press € or | to select the HDMI | audio
mode (Auto 1s the recommended mode). See
“Connecting an HDMI or DVI device to the
HDMI™ input” (Es Page 20).
3 To save your settings, highlight Done and
then press =).
en viewing the input, 1
digital audio from the HDMI input 1s
available, 1t will be output. If not, the
TV will automatically detect and
output analog audio from the PC Audio
Input.
When viewing the HDMI | input,
digital audio from the HDMI input will
be output.
When viewing the HDMI | input,
analog audio from the PC Audio input
will be output.
Auto
Digital
Analog
Note: Because the PC and HDMI-1 inputs
share the same set of analog audio inputs, the
PC Audio menu setting influences the HDMI
1 Audio menu setting. If PC Audio is set to
“No”, the HDMI 1 Audio setting changes fo
“Auto”. If PC Audio is set to “Yes”, the HDMI
1 Audio setting is set to Digital” and is
grayed out in the menu. (ss “Connecting an
HDMI or DVI device to the HDMI“ input” on
Page 20.)
31
You can view the digital signal meter in the ANT/
CABLE digital TV input source only.
To view the digital signal meter:
1 From the Setup menu, press 4 or ¥ to
select Installation and then press fn).
2 Press dor Bp to highlight Terrestrial, and
press A or Ÿ to select Signal Meter and
then press e.
3 Pres 4 Y < № to select the antenna input
and digital channel whose signal you want to
check.
Note:
* The physical digital channel number
listed in the Signal Meter screen may not
correspond to a virtual TV channel
number. Contact your local
broadcasters to obtain the RF channel
numbers for your local digital stations.
* The signal strength does not change
between virtual channels on the same
physical channel.
The Time Zone setup will allow you to specify the
correct time zone for your region. This feature will
allow the TV status information to show the
correct time zone information for your viewing
area.
To set the time zone:
1 From the Setup menu, press 4 or Y to
select Installation and then press e.
2 Press € or to highlight Terrestrial, and
press A or to select Time Zone and then
press e,
3 Press 4 and then
4 Highlight Done, and then press 6»),
< or > to select the region.
After the time zone has been set, you will be asked
to set the current Daylight Saving Time status.
To set the Daylight Saving Time Status:
1 Press dor to select Yes or No, highlight
ро
Done, and then press e=.
32
1 From the Setup menu, press A or Y to
select Installation and then press “==.
2 Press dor to highlight System Status,
and press À or Ÿ to select System
Information and then press em),
3 Press € or B to scroll through the menu bar to
select Support Information and view the
related information.
1 From the Setup menu, press 4 or Y
select Installation and then press €.
2 Press € or to highlight System Status,
and press 4 or Y to select System
Information and then press €.
3 Press dor № to scroll through the menu bar to
select Factory Defaults.
4 Enter vour PIN code (or 0000 1f no PIN code
has been set).
5 Highlight Yes and then press 6. The TV will
turn off automatically after a few seconds.
After the TV turns off, unplug the TV power
cord and then plug 1t in again to complete the
reset process.
To cancel the reset:
Highlight NO and then press 6.
Selecting the video input source
to view
INPUT
1 Press za ON the remote control or INPUT/
ENTER on the TV control panel.
2 And then either:
a) Press 0-6; or
b) Repeatedly press 4 or v on the remote
control and then press &“ to change the
input; or
c) Repeatedly press * on the remote control
or INPUT/ENTER on the TV control
panel to change the input.
The current signal source displays in the top
right corner of the input Selection screen.
Note:
* You can label the video input sources
according to the specific devices you have
connected to the TV (1x “Labeling the video
input sources” at right).
« Sources can be hidden (yx “Labeling the
video input sources” at right).
* “No video signal” will appear randomly on
the screen if no signal is received in video
input mode.
If CEC device is connected to an HDMI
input, the REGZA-LINK icon will appear.
If a REGZA-LINK® device with HDMI
switching capability (e.g. Audio Receiver) is
connected to the HDMI input:
Press ** on the remote control or INPUT/ENTER
on the TV control panel repeatedly to highlight
HDMI lor HDMI 2. If the connected CEC device
has any connected devices, a separate device
selection popup window will appear.
4 Audio Receiver
- 2 Player
Press ® repeatedly to highlight the desired input
source, and then press sn
Note:
« When selecting REGZA-LINK® input
sources from the p EP window using * ha
some REGZA-LINK” devices may
automatically turn on.
. When selecting input sources using A or
Y. you will have to press t= to actually
select a particular device from the popup
window.
Labeling the video input sources
You can label each video input source according to
the type of device you connected to each source,
trom the following preset list of labels:
— — (default label)
Audio Receiver
Cable
Compact Disc
DTV
DVD
Game Console
HDMI Switch (HDMI inputs only)
Laser Disc
Satellite/DSS
VCR
Video Recorder
Hide (to hide an unused input in the Input
Selection screen)
Note: If you select PC in the Input Selection
screen, you can choose only — —”, “Game
Console” or “Hide” as the label.
To label the video input sources:
1 From the Preferences menu. press À or W
to select Input Labeling and then press enw).
2 Press 4 or W to select the video source you
want to label.
3 Press or pp to select the desired label for
that input source. If a particular input 1s not
used, you can select Hide as the label, which
will cause that input to be “grayed out” in the
Input Selection screen and skipped over
INPUT
when you press % on the remote control or
INPUT/ENTER on the TV control panel.
4 To save the new input labeis, highlight Done
and then press 6).
To revert to the factory default labels,
highlight Reset and then press em.
33
Input labeling example:
The screen below 1s an example of how you could
label the inputs 1f you connected a VCR to Video,
a Video Recorder to HDMI 1, and a DTV set-top
box to HDMI 2. Also note that the ColorStream
HD input 1s labeled “Hidden”, which means that
input will be skipped over when ** is pressed.
To clear the input labels:
1 From the Preferences menu, press А ог \
to select Input Labeling and then press gw.
2 Highlight Reset and then press mw).
34
Setting the Channel Tuning Mode
This feature allows you to choose how tuning will
be handled tor analog and digital channels when
the TV 1s in Antenna mode.
Note: To use this feature, the Input
Page 28).
The channel tuning mode has three options
Both analog and digital channels can
be tuned normally.
Standard
Digital channels will have priority
when manually entering a channel
Auto number using the Channel Number
(Default) — buttons (0-9) on the remote control,
analog channels can still be tuned by
(64 or €, if available.
Digital Only digital channels can be tuned.
1 From the Setup menu, press 4 or ¥ to
select Installation and then press gr.
2 Press dor Pp to highlight Terrestrial, and
then press A, or Y to select Channel
Tuning Mode.
3 Press or to select your desired made.
Note: Even if the Channel Tuning Mode is
set to Digital, analog channel 3 will still be the
default channel to prevent the initial case
where no digital channels have been found in
prior channel scans.
Tuning to the next programmed
channel
To tune to the next programmed channel:
Press [ad or E) on the remote control or PLAY/
CHANNEL ~~ or STOP/CHANNEL Vv on the
TV control panel.
Note: This feature will not work unless you
program channels into the TV's channel
memory (ts Page 29).
Tuning to a specific channel
(programmed or unprogrammed)
Tuning analog channels:
Press the Channel Number buttons (0-9) on the
remote control. For example, to select channel
125, press 1, 2, 5, then fore).
Tuning digital channels:
Press the Channel Number buttons (0-9) on the
remote control, followed by the dash €) button
and then the sub-channel number. For example, to
select digital channel 125-1, press 1,2, 5, —, 1, then
&-
Note: If a digital channel is not programmed
— either through the automatic channel scan
(> Page 29) or the channel add/skip function
(t= Page 29) you will have fo tune the RF
channel using the Channel Number buttons
Switching between two channels
using Channel Return
The Channel Return feature allows you to switch
between two channels without entering an actual
channel number each time.
1 Select the first channel you want to view.
2 Select a second channel using the Channel
Number buttons (and the dash (7) button if
selecting a digital channel).
3 Press % on the remote control. The previous
Ta
channel will display. Each time you press “a.
the TV will switch back and forth between the
last two channels that were tuned.
Note: If you press “ir from a non-antenna
input, the TV will return to the last-viewed
input.
You can save separate picture size preferences for
each input on vour TV.
To select the picture size using the remote
control:
1 Press "CS" on the remote control.
2 While the Picture Size screen is open, you
can do one of the following to select the
desired picture size:
* Press the corresponding Channel Number
buttons (0-6) while the Picture Size screen
1s open.
* Press 4 or W while the Picture Size
screen 15 open.
To select the picture size using the menus:
1 From the Picture menu, press A or Y to
select Theater Settings and then press e.
2 Press A or to select Picture Size and
then press € or > to select the desired picture
size and then press e).
Se”
3 Highlight Done and then press Go).
Note: Some of the picture sizes may not be
available depending on the receiving signal
format (those will be “grayed out” in the
Picture Size screen).
Using these functions to change the picture size
(1.e., changing the height/width ratio) for any
purpose other than your private viewing may be
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal hability.
Selecting the picture size
You can view many program formats in a variety
of picture sizes —Natural, TheaterWide 1,
TheaterWide 2, TheaterWide 3, Full, 4:3 HD,
Native and Dot by Dot (available in PC Mode
Only).
Note: The “picture size” illustrations are
examples only. The format of the image (in
any of the picture sizes) will vary depending
on the format of the signal you are currently
watching. Select the picture size that displays
the current program the way that looks best fo
you.
Note: If you select one of the TheaterWide®
picture sizes, the top and bottom edges of the
picture (including subtitles or captions) may
be hidden. To view the hidden edges, either
scroll the picture (TheaterWide 2 and 3 only)
or try viewing the program in Full or Natural
picture size.
35
Natural
OOO
OOO
Some program formats will display with sidebars
and/or bars at the top and bottom.
4:3 HD
(for 720p, 1080i, and 1080p program
sources only)
OOO
OOO
TheaterWide 1
(for 4:3 format programs)
OOOL ID OO
OOO © OO
The center of the picture remains close to its
original proportion, but the left and right edges are
stretched wider to fill the screen.
=p
TheaterWide 2
(for letter box programs)
OOO
О О ©
The top and bottom edges of the picture may be
hidden*.
TheaterWide 3
(for letter box programs with subtitles)
Full
(for 16:9 [480i, 480p] source programs
only)
© OO
O0 0
O0 0} 10 0 0
e Ifreceiving a squeezed 4:3 format program, the
picture 1s stretched wider to fill the width of the
screen, but not stretched taller.
* None of the picture 1s hidden.
=
36
Picture 1s not distorted from original size.
Native
(for 480i (HDMI), 480p (HDMI), 720p, 1080i,
and 1080p signal programs)
O0 9,10 00
ОО О ОО
* receiving a 4801 (HDMI), 480p (HDMI), 720p,
10801, or 1080p signal program, Native mode
scales the video to display the entire picture
within the borders of the screen (1e. no
overscanning).
This 1s especially usetul for external HD sources
such as DVD, DVHS movies, or PC graphics.
Note:
* This mode is supported only for HDMI
(1080p, 10801, 720p, 480p, and 4801),
ColorStream (10801 and 720p), and ANT/
CABLE (digital) inputs (1080p, 10801, and
720p).
* Depending on the input signals, the border
of the picture may be hidden, displayed in
black, or noisy.
>
Dot by Dot
(for VGA, SVGA, XGA, and WXGA sources
oniy)
The “Dot by Dot” picture 1s non-scaling display.
Depending on the input signal formats, picture 1s
displayed with sidebars and/or bars at the top and
bottom. (Example: VGA input source)
* To view the hidden areas (such as subtitles or
captions), see “Scrolling the TheaterWide?
picture” (E Page 37).
(TheaterWide 2 and 3 only)
Scrolling the TheaterWide® picture
You can set separate scroll settings for the
TheaterWide 2 and TheaterWide 3 modes for each
Input.
1 From the Picture menu, press & or W to
select Theater Settings and then press gr.
2 In the Picture Size field, select either
TheaterWide 2 or TheaterWide 3 (you
cannot scroll in any other mode).
3 Press vw
4 Press € or B to scroll the picture up and
down as needed and then press fre)
Reset and then press em.
Note: When receiving a signal at 480i
resolution, the picture scroll function may
have limited adjustment range.
to highlight the Picture Scroll ficid.
Using the auto aspect ratio
feature
When the auto aspect ratio feature 1s set to On, the
TV will automatically select the picture size when
one of the following input sources 1s received:
* A 4801, 480p, 720p, 10801 digital signal from the
ANT/CABLE input
* A 4801 signal from the Video input
* A 4801 signal from the ColorStream HD input
* A 4801, 480p, 720p, 10801, 1080p, or VGA
(60Hz) signal from the HDMI 1/2 input
Note: The auto aspect ratio feature 1s not
applicable to the PC input.
To turn on the auto aspect ratio feature:
1 From the Picture menu, press A, or Y to
select Theater Settings and then press gu.
2 Press À or W to select Auto Aspect Ratio
and then press € or > to select On and then
press € ве).
Reset and then press 3
Selecting the cinema mode
When you view a DVD (3:2 pulidown processed)
trom a DVD player connected to the Video,
ColorStream HD (component video), or HDMI
inputs on the TV, smoother motion can be obtained
by setting the Cinema Mode to Film.
To set the Cinema Mode to Film:
(available for 4801 and 10801 signals)
1 From the Picture menu, press A or ¥ to
select Theater Settings and then press Gr.
2 Press À or W to select Cinema Mode and
then press € or > to select Film and then
press fan.
3 To save the new settings, highlight Done and
then press €.
To revert to the factory & defaults, highlight
Reset and then press am
To set the Cinema Mode to Video:
Select Video in step 2 above.
37
Selecting the picture mode
You can select your desired picture settings from
four different modes, as described below.
Bright and dynamic picture (factory
Sports
setting)
Standard Standard picture settings (factory
setting)
Movi Lower contrast for darkened room
ovie , ;
(factory setting)
PC Designed for viewing of PC tables
and documents
Preference Your personal preferences
Note: PC mode is available for HDMI and PC
inputs only (grayed out for other input
sources).
1 From the Picture menu, press А or ¥
select Mode and then press fm.
2 Press À or W to select the picture mode you
prefer and then press gr.
Note: The picture mode you select affects the
current input only. You can select a different
picture mode for each input.
38
Adjusting the picture quality
You can adjust the picture quality (Contrast,
Backlight, DynaLight™, Brightness, Color, Tint,
and Sharpness) to your personal preferences.
Contrast lower higher
Backlight* darker lighter
DynaLight* On/Off On/Off
Brightness = darker lighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
* Backlight
This feature adjusts the brightness of the entire
screen. When in video mode and no signal is
input, this will automatically be set to 0 (Settings
are stored in memory).
** Dynalight
This function automatically strengthens the black
coloring of dark areas in the video according to
the level of darkness.
1 From the Picture menu, press A or Y to
select Picture Settings and then press Gu).
2 Press 4 or W to select the picture quality you
want to adjust (Contrast, Backlight,
DynalLight, Brightness, Color, Tint, or
Sharpness).
3 Press dor e to adjust the setting, as
described in the table above and then press 6.
4 To save the new settings, highlight Done and
then press &=). You can use any of the picture
modes (£55 “Selecting the picture mode” at left
column) as a starting point for adjusting the
picture settings.
To revert back to the base mode that you began
adjusting the picture settings from, highlight
Reset and then press ma.
The picture qualities you adjusted are
“Selecting the picture mode” at left column) until
Reset 1s selected.
Base closed captions
The closed caption mode has two options:
» Captions—An on-screen display of the dialogue,
narration, and sound effects of TV programs and
videos that are closed captioned (usualiy marked
“СС” тп program guides).
* Text—An on-screen display of information not
related to the current program, such as weather or
stock data (when provided by individual stations).
1 From the Preferences menu, press 4 or
to select Base CC Mode.
2 Press or B> to select the desired closed
caption mode.
+ To view captions:
Highlight CC1, CC2, CC3, or CC4. (CC1
displays translation of the primary language 1n
your area.)
Note: If the program or video you selected
is not closed captioned, no captions will
display on-screen.
* To view text:
Highlight T1, T2, T3, or T4.
Note: If text is not available in your area, a
black rectangle may appear on screen. If
this happens, set the Base CC Mode to
Off.
* To turn off the closed caption mode:
Select Off in step 2 above.
Note: A closed caption signal may not display
in the following situations:
* When a videotape has been dubbed
* When the signal reception is weak
* When the signal reception is non-standard
Digital CC Settings
You can customize the closed caption display
characteristics by changing the background color,
opacity, text size, type, edge, and color.
Note:
* This feature is available for digital channels
only.
* You cannot set the Caption Text and
Background as the same color.
Auto, Small, Standard, Large
Caption Size
Auto, Default, Mono w. Serif,
Caption Text Prop. w. Serif, Mono w/o Serif,
Type Prop. w/o Serif, Casual,
Cursive, Small Capitals
Auto, None, Raised,
Depressed, Unitorm, Lett Drop
Shadow, Right Drop shadow
Auto, Black, White, Red,
Green, Blue, Yellow, Magenta,
Cyan
Caption Text
Edge
Caption Text
Color
Text Foreground Auto, Transparent, Translucent,
Opacity Flashing, Sohd
| Auto, Black, White, Red,
Background | | .
Color Green, Blue, Yellow, Magenta,
olor С
yan
Text Auto, Transparent, Translucent,
Background Flashing, Sohd
Opacity
Auto, Black, White, Red,
Green, Blue, Yellow, Magenta,
Cyan
Caption Text
Edge Color
To customize the closed captions:
1 From the Preferences menu, press 4 or ¥
to select Digital CC Settings and then press
и
are .
NA
2 Press 4 ог \ to select the characteristic you
want to change, and then press < or > to
select the format for that characteristic (see
table above).
3 To save the new settings, highlight Done and
then press 6.
To revert to the factory defaults, highlight
Reset and then press 6m).
39
CC Selector
You can use the CC and Digital Audio
Selectors to temporarily override the default
analog caption mode (set in Base CC Mode) for
a particular channel. However, once you change to
another analog channel, the closed caption setting
will automatically change back to the current
Base CC Mode setting.
You can also use the CC Selector to select digital
closed caption services (if available). When such
services are not available, the CC Selector presents
a default list of services. If the selected service 1s
not available, the next best service will be used
Instead.
To select closed cations:
1 From the Preferences menu, press A or Y
to select CC and Digital Audio Selectors
and then press gr.
2 Press A or Y to select Closed Caption,
and then press € or > to select the desired
service.
3 Press cia.
40
Muting the sound
Press * on the remote control to partially reduce
(1/2 MUTE) or turn off (MUTE) the sound. Each
MUTE
N
time vou press © , the mute mode will change m
the following order:
1/2 Mute —> Mute — Volume ——
If the ciosed caption mode 15 set to Off when you
select “MUTE” mode, the closed caption feature 1s
automatically activated if the TV program 15
Closed Captioned. To mute the audio without
automatically activating the closed caption feature,
use ( to set the volume to 0. See “Using the
closed caption mode” (155° Page 39) for more
information on closed caption modes.
Using the digital audio selector
You can use the CC and Digital Audio
Selectors to conveniently switch between audio
tracks on a digital channel (for those channels that
have multiple audio tracks).
To use the digital audio selector:
1 From the Preferences menu, press A or Y
to select CC and Digital Audio Selectors
and then press fe.
2 Press 4 or ¥ to select Audio, and then press
<Q or > to select the desired service.
3 Press At.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows
you to output high-fidelity stereo sound. MTS also
can transmit a second audio program (SAP)
containing a second language, music, or other
audio information (when provided by individual
stations).
When the TV receives a stereo or SAP broadcast,
the word “STEREO” or “SAP” appears on-screen
when "#" is pressed. The MTS feature 1s only
available for analog signals on the ANT/CABLE
Input.
1
2 Press 4 or Y to select MTS, and then press
< or P to select Stereo.
3 Tosavethe new settings, highlight Done and
Zn
Reset and then press gu).
Note:
* You can typically leave the TV in Stereo
mode because it will automatically output
the type of sound being broadcast (stereo or
monaural).
* ff the stereo sound is noisy, select Mono fo
reduce the noise.
To listen to an alternate language on an
ATSC digital station (if available):
Highlight the Language field ın step 2 above,
and then press € or B to select the language you
prefer.
To listen to a second audio program on an
analog station (if available):
Select SAP 1n step 2 above.
Note:
* A second audio program (SAP) can be
heard only on those TV stations that offer it.
For example, a station might broadcast
another language as a second audio
program. If you have SAP on, you will see
the current program on the screen but hear
the other language instead of the program’s
normal audio.
* ff you have SAP on and the station you are
watching is not broadcasting a second audio
program, the station's normal audio will be
output. However, occasionally there is no
sound at all in SAP mode. If this happens,
set the MTS feature to Stereo mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the
bass, treble, and balance.
1 From the Sound menu, press 4 or to
select Audio Settings and then press 4 бе)
2 Press 4 or ¥ to select the item you want to
adjust (Bass, Treble or Balance).
3 Press dor e to adjust the level.
< makes the bass or treble weaker or
increases the balance in the left channel
(depending on the item selected).
* Bb makes the bass or treble stronger or
increases the balance in the right
channel (depending on the item
selected).
4 To save the new settings, highlight Done and
then press 63.
To revert to the factory defaults. highlight
Reset and then press em
Note: Selecting Speakers in step 2 and
setting it to Off will mute the TV's built-in
speakers.
Selecting the optical audio output
format
You can use this feature to select the optical audio
output format when you connect a Dolby Digital
decoder or other digital audio system to the
Optical Audio Out terminal on the TV (=>
“Connecting a digital audio system” on Page 22).
1 From the Sound menu, press A or Y to
select Audio Setup and then press ems.
2 Press A or Y to select Optical Output
Format and then press € or B to select either
Dolby Digital or PCM, depending on your
device.
3 To save the new settings, highlight Done and
then press gm).
To revert to the ee defaults. highlight
Reset and then press me)
41
Using the Dolby® Digital Dynamic
Range Control feature
This dynamic range control feature causes the
ATSC dynamic range to be further compressed,
allowing you to switch from ATSC to analog
broadcasts at the same dynamic range.
1 From the Sound menu, press à or W
select Audio Setup and then press em.
2 Press 4 or W to select Dolby Digital
Dynamic Range Control and then press «€
or e to select Compressed. When
Standard 1s selected, the audio 1s output with
minimal compression.
3 To save the new settings, highlight Done and
then press gr).
To revert to the factory defaults, highlight
Reset and then press gr).
Note:
« This item will be grayed out for NTSC
signals, Video, ColorStream, and PC inputs.
* The Dolby Digital Dynamic Range Control
will function in relation to Optical Output
Format (PCM mode).
42
Using the Locks menu
The Locks menu includes the Enable Rating
Blocking, Edit Rating Limits, Input Lock, Control
Panel Lock, GameTimer and New PIN Code
features. You can use these features after entering
the correct PÍN code.
Entering the PIN code
MENU
1 Press rol and then press
Locks.
2 Press Y, which displays the PIN code entry
screen.
+ The Lock System screen appears 1f a PIN
code has not been stored. Press the Channel
Number buttons to enter a new four-digit
code, enter the code a second time to confirm,
and then press gr,
+ The Locks/Active screen appears if the PIN
code 1s already stored. Use the Channel
Number buttons to enter your four-digit code
and then press gr,
« or № to highlight
If the wrong PIN code 1s entered, the message
“Incorrect PIN code, please try again!” appears.
Highlight Retry and then press em). Enter the code
again and then press go.
When the correct PIN code 1s entered, the Locks
menu opens.
If you cannot remember your PIN
code
While the PIN code entering screen 1s displayed,
press "#4" four times within five seconds. The PIN
code will be cleared and vou can enter a new PIN
code.
Changing your PIN code
1 From the Locks menu, press W to display the
PIN code entering screen.
2 Enter your four-digit PIN code and then press
3 Press А ог \
then press 6).
to select New PIN Code and
4 Press the Channel Number buttons to enter a
new four-digit code. Reenter the PIN code to
confirm 1t.
5 Press бе). The new PIN code 1s now active.
Blocking TV programs and movies
by rating (V-Chip)
Some TV programs and movies include signals
that classify the content of the program (violence,
sex, dialogue, language). The V-Chip feature 1n
this TV detects the signals and blocks the
programs according to the ratings you select. (For
rating descriptions, see the tables on the next
page.)
Note: Rating blocking is a function of the
V-Chip feature in this TV, which supports the
U.S. V-Chip system only.
To block and unblock TV programs and
movies:
1 From the Locks menu, press Y to display the
PIN code entering screen.
Enter your four-digit PIN code and then press
Press A, or Y to select Enable Rating
Blocking.
2
3
4 Press dor to select On and then press fe).
5 Press 4 or ¥ to select Edit Rating Limits
and then press ex). The Edit Rating Limits
screen appears.
6 Pres 4 Y <or and then press 6 to
select the level of blocking you prefer. A box
with an “X” 1s a rating that will be blocked. As
rating appears at the bottom of the screen.
7 When done selecting the ratings you want to
block, highlight Done and then press gu.
Downloading an additional rating
system for blocking TV programs
and movies
An additional rating system may be available for
use 1n selectively blocking programs.
Note: The currently tuned station must be
receiving a digital signal before an additional
rating system can be downloaded.
To download the additional rating system (if
available):
1 From the Locks menu, press W to display the
PIN code entering screen.
2 Enter your four-digit PIN code and then press
A
[ENTER
fr”
3 Press 4 or ¥ to select Enable Rating
Blocking.
4 Press €or > to select On and then press 6).
5 Press 4 or W to select Edit Rating Limits
and then press e). The Edit Rating Limits
screen appears.
6 Press 4 or Y to select Alt RS and then press
em). The Edit Alternate Ratings screen
appears.
Note:
* The Alt RS button will only be available
if an additional rating system is currently
available.
« [I may take several minutes forthe TV fo
download the additional rating system.
* The information displayed in the
Alternate Ratings screen will depend
on the configuration of the additional
rating system available at the time of
download.
7 Pres A Y «or Pp and then press 6 to
select the level of blocking you prefer. A box
with an “X” 1s a rating that will be blocked.
8 When done selecting the ratings you want to
block, highlight Done and then press emy.
9 Inthe Edit Rating Limits screen, highlight
Done and then press ge.
Note:
* The additional rating system can only be
downloaded one time. You will not be able to
download any updates to the rating system
should such updates become available.
* The additional rating system is not
designed, transmitted, or controlled by the
TV or Toshiba, nor is the availability of an
additional rating system determined or
controlled by Toshiba. Similarly, the rating of
programs in an additional rating system is
not determined, transmitted, or controlled by
the TV or Toshiba.
* The additional rating system is an evolving
technology; therefore, availability, content,
and format may vary.
43
Independent rating system for broadcasters
TV-MA
ature Audience Only (This
program is specifically designed to
be viewed by adults and therefore
may be unsuitabie for children
under 17.)
L) Crude or indecent language S)
Explicit sexual activity V) Graphic
violence
Not intended for anyone 17 and
TV-14
Parents Strongiy Cautioned (This
program contains some material
that many parents would find
unsuitable for children under 14
years of age.)
D) Intensely suggestive dialog L)
Strong, coarse language S) Intense
sexual situations V) Intense
violence
TV-PG
Parental Guidance Suggested
(This program contains material
parents may find unsuitable for
younger children.)
D) Some suggestive dialog L)
Infrequent coarse language S)
Some sexual situations V)
Moderate violence
TV-G
General Audience (Most parents
would find this program suitable for
all ages.)
TV-Y7,
TV-Y7FV
Directed to Older Children (This
program is designed for children
age 7 and above. Note: Programs
in which fantasy violence may be
more intense or more combative
than other programs in this
category are designated TV-Y7FV.)
TV-Y
All Children (This program is
designed to be appropriate for all
children.)
44
NC-17 under
R Restricted (Under 17 requires
accompanying parent or adult)
Parents Strongly Cautioned (Some
PG-13 material may be inappropriate for
children under 13)
Parental Guidance Suggested
PG (Some material may not be suitable
for children)
G General Audience (Appropriate for
all ages)
Note:
* [fyou place an “Xin the box next fo “‘None’
Rated,” programs rated “None” will be
blocked; however, programs that do not
provide any rating information will not be
blocked.
To display the rating of the program you are
watching, press "E on the remote control. If
it is rated “None,” the word “TV-NONE”
appears in the display screen (as shown
below right). If rating information is not
provided, no rating will appear in the display
screen.
Unlocking programs temporarily
If you try to tune the TV to a program that exceeds
the rating limits you set, the TV will enter program
lock mode and a warning message will appear on-
SCICCH.
You can either temporarily unlock the program or
select an unlocked program to watch.
1 Press
TE
At
2 Enter vour four-digit PIN code and then press
Ge). If the correct code is entered, the program
lock mode 1s released and the normal picture
appears. All locking 1s disabled until the TV 1s
turned off, and will be enabled when the TV 1s
turned on again.
Using the input lock feature
You can use the Input Lock feature to lock the
video inputs (Video, ColorStream HD, HDMI
1. HDMI 2, and PC) and channels 3 and 4. You
will not be able to view the input sources or
channels until you unlock the inputs.
1 From the Locks menu, press Y to display the
PIN code entering screen.
Enter your four-digit PIN code and then press
200
ENTER] ,
ми
Press A or Y to select Input Lock.
Press q or > to select the level of video input
locking vou prefer, as described below.
EXIF
Press cites to exit.
Os RO ON
Locks Video, ColorStream HD,
HDMI 1, HDMI 2, and PC.
Video
Locks Video, ColorStream HD,
HDMI 1, HDMI 2, PC and
channels 3 and 4.
* Select Video+ if you play
video tapes via an ANT/
CABLE input.
Off Unlocks all video inputs and
channels 3 and 4.
Video+
Using the GameTimer®
You can use the GameTimer to set a time limit for
playing a video game (30-120 minutes). When the
GameTimer expires, the TV enters Input Lock
mode and locks out the input source for the video
game device.
To set the GameTimer”:
1 From the Locks menu, press W to display the
PIN code entering screen.
Enter your four-digit PIN code and then press
Press A or Ÿ to select GameTimer.
Press «€ or e to select the length of time until
the Input Lock 1s activated (30, 60, 90, or 120
minutes).
Hw N
B Press cé to exit.
ZA
To cancel the GameTimer®:
Select Off in step 4 above.
To deactivate the Input Lock once the
®
GameTimer” has activated it:
Set the Input Lock to Off (= left column).
Note:
A message will appear when 10 minutes, 3
minutes, and 1 minute remain on the
Game Timer.
* [fthe TV loses power with time remaining on
the Game Timer, when power is restored,
the TV will enter Input Lock mode (as it the
GameTimer had been activated) and you
column).
Using the control panel lock feature
You can lock the control panel to prevent vour
settings from being changed accidentally (by
children, tor example). When the control panel
lock 1s On, none of the controls on the TV control
panel will operate except POWER.
1 From the Locks menu, press W to display the
PIN code entering screen.
2 Enter your four-digit PIN code and then press
fren)
eres
3 Press 4 or ¥ to select Control Panel
Lock.
4 Press € or Pp to select On and then press cie
to exit. -
When the control panel 1s locked and any
button on the control panel (except POWER)
1s pressed, the message “NOT AVAILABLE”
appears.
To unlock the control panel:
Select Off in step 4 above, or press and hold
VOLUME- on the TV control panel for about 10
seconds until the volume icon appears.
45
Using the PC settings feature
You can view an image froma PC on the TV
screen. When a PC 1s connected to the TV's PC IN
terminal, you can use the PC Settings feature to
make adjustments to the image. If the edges of the
picture are cut off, readjust the Horizontal
Position and Vertical Position. If the picture 15
affected by mterference, readjust the Clock
Phase and Sampling Clock.
INFUT
1 Repeatedly press a to select PC input mode
(vs “Selecting the video input source to view”
on Page 33).
2 From the Setup menu, press 4 or Y to
select PC Settings and then press ow.
Note: If a PC is not connected or there is
no PC input signal, this feature will be
grayed out in the Setup menu.
3 Press 4 or ¥ to select the item you want to
adjust.
4 Press € or > to make the appropriate
adjustments.
Note: The screen is disrupted
momentarily when adjusting the PC
settings. This is not a sign of malfunction.
Moves the picture left/right. The
Hor zontal adjustment range 1s within +50
Position LC Ç
from center.
Vertical Moves the picture up/down. The
Le adjustment range 1s within =10
Position Lu Ç
from center.
Helps to reduce noise and sharpen
Clock Phase the picture. The adjustment range
1s within +16 from center.*
Helps to reduce noise and
Sampling minimize periodic vertical stripes
Clock on the screen. The adjustment
range 1s within +10 from center. *
Highlight this item and then press
(«= to get an optimum adjustment
a - yg -
automatically.
Auto Adjust
* The default settings may vary depending on the
input signal format.
46
Setting the PC Audio
This function allows you to output or mute the
sound from your PC when connecting using the
PC IN terminal and an analog RGB cable (ts Page
23).
1 From the Sound menu, press 4 or W
select Audio Setup and then press my.
2 Press 4 or W to select PC Audio and then
press < or > to select No or Yes.
Yes: When viewing the PC put, the audio
trom the PC Audio input can be heard.
No: When viewing the PC mput, there will be
no audio.
Note: Because the PC and HDMI 1 inputs
share the same set of analog audio inputs,
the PC Audio menu setting influences the
HDMI 1 Audio menu selling. If PC Audio
is set fo “No”, the HDMI 1 Audio setting
changes to “Auto”. If PC Audio is set to
“Yes”, the HDMI 1 Audio setting is set to
“Digital” and is grayed out in the menu.
(=> “Setting the HDMI audio mode” on
Page 31.)
Setting the sleep timer
You can set the sleep timer to turn off the TV after
a set length of time (maximum of 180 minutes).
To set the sleep timer using the remote
control:
Press © on the remote control to set the length of
time until the TV turns off. Repeatedly press "7"
to increase the time 1n 10-minute increments, or
press A or Ÿ to increase or decrease the time mn
10-minute increments, to a maximum of 180
minutes.
To set the sleep timer using the on-screen
menus:
1 From the Setup menu, press 4 ог \
select Sleep Timer and then press 6.
2 Press the Channel Number buttons to enter the
length of time in 10-minute increments.
3 Highlight Done and then press fm).
Note: When a power failure occurs, the
sleep timer setting may be cleared.
To display the remaining sleep time:
SLEE
[ET
Ц
Май
Press
Note: A message will display on-screen when
there is one minute remaining on the sleep
timer.
To cancel the sleep timer:
Repeatedly press “E until it is set to 0 minute.
This 1s a new feature that uses CEC technology
and allows you to control Toshiba REGZA-LINK®
compatible devices from the TV remote via HDMI
connection (£5 Page 21).
When the Enable REGZA-LINK m the REGZA-
LINK Setup menu (te Page 49) 1s set to On, the
following REGZA-LINK® functions will be
enabled.
REGZA-LINK® playback device (DVD
player, etc.) control
With your TV’s remote control, or using the
REGZA-LINK Player Control menu, vou can
control the connected REGZA-LINK® playback
device vou are watching.
Available remote control key functions:
PLAY
Begins playback.
Stops playback.
Pauses the picture during play or
record mode.
Skips forward.
Skips backward.
Fast-forwards/Fast-reverses.
Enters contents menu, etc.
Navigates contents menu, etc.
CANCEL Closes the menu.
Note: These functions depend on the devices
connected.
47
REGZA-LINK® Player Control menu
functions
1 From the Preferences menu, press 4 or W
to select REGZA-LINK Player Control and
then press em.
2 Press À or W
to select the 1tem you want to
control and then press (es)
Al,
A
Power Turns the selected device on and
off.
Root Menu Accesses the top menu of the
selected device.
Accesses the contents list when you
Contents press gy. At this time, the
Menu REGZA-LINK Player Control
menu will disappear.
Setup Menu Accesses the setup menu of a DVD
player.
T Accesses the top menu ofa DVD
op Menu .
during playback.
M Accesses the menu of a DVD
enu .
during playback.
Note:
« These functions depend on the devices that
are connected.
* The REGZA-LINK Player Control item will
be grayed out in the following conditions:
- À non-HDMI input is currently selected.
- The Enable REGZA-LINK item is set to
Off.
- The connected CEC device is not a
playback or recording device.
REGZA-LINK® input source
selection
If a REGZA-LINK® device with HDMI switching
capability (e.g. Audio Receiver) 1s connected to
the HDMI input, you can select another REGZA-
LINK® device that is connected to the master
HDMI device using “a on the remote control or
the TV control! panel (1 Page 33).
48
VOLUME and MUTE controls of
Audio Receiver
With your TV's remote control, you can adjust or
mute the sound volume of the Audio Receiver.
* (4) [9] adjust the volume level.
MUTE
и
N
> turns off the sound.
Note:
* To use this function:
- Set Speaker Preference to Audio
Receiver in the REGZA-LINK Setup
menu.
- Confirm that a connected REGZA-LINK®
device (such as DVD player, etc.) is
selected forthe Audio Receiver input
source.
You can also use this function when the
audio receiver is connected to the TV's
DIGITAL AUDIO OUT terminal (not HDMI
connection). In this case, select a digital
audio input mode on the Audio Receiver.
* These functions depend on the device
connected.
Other REGZA-LINK® functions
When the Enable REGZA-LINK and cach Ист
in the REGZA-LINK Setup menu are set to On,
the following functions will be enabled.
If a connected HDMI device
TV Auto Input starts playing video or audio, the
Switch TV will automatically switch to
the appropriate HDMI input.
TV Auto If a device 1s turned on, the TV
Power On turns on automatically.
If the TV 1s turned oft, the TV
will send a message to turn oft all
of the devices connected to the
TV.
From this item, you can set your
audio output preference to the
TV speakers or the audio
receiver speakers. When this
item 1s set to Audio Receiver,
the TV remote can be used to
adjust or mute the volume of the
audio receiver. This item will be
grayed out unless a REGZA-
LINK* compatible audio
receiver 1s connected.
Device Auto
Standby
Speaker
Preference
Note: When you turn on the audio receiver,
change its input source, or adjust the sound
volume, the sound will be output from the
audio receiver's speakers even if TV
Speakers has been selected. Turn the TV off
and on again to output the sound from the TV
speakers.
To set the REGZA-LINK® Setup:
1 From the Setup menu, press 4 or Ÿ to
select REGZA-LINK Setup and then press
и
(ENTER,
Due)
2 Press A or to select Enable REGZA-
LINK and then press € or > to select On.
Note: If you select Enable REGZA-LINK
Off, the other items will be grayed out.
3 Press 4 or Y to select the REGZA-LINK
Setup item you want to use and then press «
or > to select On or desired mode.
* TV Auto Input Switch: On/Off
* TV Auto Power: On/Off
* Device Auto Standby: On/Off
* Speaker Preference: TV Speakers/Audio
Receiver
then press т).
To revert to the factory defaults, highlight
Reset and then press uw.
To display TV status information using
DISPLAY:
DISPLAY
24" on the remote control.
Press
The following mformation will display (if
applicable):
* Current input (ANT/CABLE, Video, etc.)
* If ANT/CABLE 15 the current input, either
“CABLE” (for cable TV) or “ANT” (for over-
the-air broadcasts).
+ Channel number (if in ANT/CABLE mode)
* Channel label (if set)
* Digital signal strength indicator (bar graph in
lower right corner of box; for ATSC signal only)
* Stereo, Mono or SAP audio status (When HDMI
input mode, Dolby Digital or PCM)
* Video resolution
* Aspect ratio of incoming video signal (4:3 or
16:9)
* V-Chip rating status
* Game Timer (1f set)
To display more TV information:
DISPLAY
Do
Press "E on the remote control again.
The following additional information will display
for off air digital channels (if applicable):
e Title
* Duration
* Detailed description
Note: The location of the banner can be
moved to the top or bottom of the screen by
pressing 4 or Y while the DISPLAY is on-
screen.
Understanding the auto power off
feature
The TV will automatically turn itself off after
approximately 15 minutes 1t 1t 1s tuned to a vacant
channel or a station that completes 1ts broadcast
for the day. This feature functions in ANT/
CABLE mode only.
Understanding the last mode
memory feature
If the power is cut off while you are viewing the
TV, the Last Mode Memory feature
automatically turns on the TV when the power
is resupplied.
Note: If it's possible, and you will be away
from the TV for an extended period of time,
you should unplug the power cord.
49
Using the advanced picture
settings features
Using dynamic contrast
When dynamic contrast 15 set to On, the TV will
detect changes in the picture quality that affect the
appearance of your contrast settings and then
automatically adjust the video.
To select dynamic contrast preferences:
1
2
From the Picture menu, press & or Ÿ to
select Picture Settings and then press gr.
Press A or Ÿ to select Advanced Picture
Settings and then press és.
Press А or Ÿ to select Dynamic Contrast
and then press € or > to select either Off or
On and then press gr).
To save the new settings, highlight Done and
then press em).
To revert to the factory defaults, highlight
Reset and then press my.
Note: If you select one of the factory-set
picture modes (Sports, Standard, Movie
or PC) and then change the dynamic
contrast setting, the picture mode
automatically changes to Preference.
Using the static gamma feature
The static gamma feature allows you to adjust the
levels of black 1n the picture.
To adjust the static gamma settings:
From the Picture menu, press & or W to
select Picture Settings and then press gr.
Press A or Y to select Advanced Picture
Settings and then press gs.
Press A or Y to select Static Gamma and
then press € or > to adjust the static gamma
and then press gr).
The adjustment range 1s within +5 from center.
* [f the setting 15 moved in the minus direction,
the detail of black colors will be decreased.
* [f the setting 15 moved 1n the plus direction,
the detail of black colors wiil be increased.
50
4 To save the new settings, highlight Done and
then press 63.
To revert to the factory defaults, highlight
Reset and then press 6.
#
Note: If you select one of the factory-set
picture modes (Sports, Standard, Movie
or PC) and then change the static gamma
setting, the picture mode automatically
changes to Preference.
Selecting the color temperature
You can change the quality of the picture by
selecting from three preset color temperatures
(Cool, Medium, and Warm), as described below.
Cool blueish
Medium neutral
Warm reddish
To select the color temperature:
1 Trom the Picture menu, press 4 ог \ to
select Picture Settings and then press 6).
2 Press A or W to select Advanced Picture
Settings and then press em.
3 Press 4 ог \ to select Color Temperature
and then press < or > to select the mode you
prefer and then press és.
4 Press À or W to select either B Drive or G
Drive and then press < or № 10 adjust the
settings and then press ==.
* B Drive: > makes the picture blueish.
* G Drive: pr makes the picture greenish.
Note: The B Drive and G Drive settings
are connected fo the Color Temperature
settings and will change based on which
setting is selected in step 3 above.
5 To save the new settings, highlight Done and
then press 6.
To revert to the factory defaults, highlight
Reset and then press em).
Note: If you select one of the factory-set
picture modes (Sports, Standard, Movie
or PC} and then change the color
temperature mode, the picture mode
automatically changes to Preference.
Using CableClear® digital noise
reduction
The CableClear* digital noise reduction feature
allows you to reduce visible interference in your
TV picture. This may be useful when receiving a
broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
1 From the Picture menu, press 4 or W to
select Noise Reduction and then press eve.
Me
2 Press & or W to select CableClear and then
press « or |» to select your desired setting and
then press re.
Lu
Note:
* [fthe current input is ANT/CABLE, or
Video, the menu will display the text
“CableClear”. The available selections
are Off, Low, Middle, and High.
* Ifthe current input is ColorStream HD,
HDMI 1,or HDMI 2, the menu will display
the text “DNR”. The available selections
are Off Low, Middle, and High. Low,
Middle, and High will reduce the noise
in varying degrees, from lowest fo
highest, respectively.
then press em.
To revert to the factory defaults, highlight
Reset and then press my.
Using MPEG noise reduction
The MPEG noise reduction feature allows you to
reduce visible interference caused by MPEG
compression. Choices tor MPEG noise reduction
are Off, Low, Middle, and High. Off is
automatically selected when this feature 15
disabled (“grayed out”).
To select the MPEG noise reduction level:
1 From the Picture menu, press A or Y to
select Noise Reduction and then press Gu.
2 Press 4 or Y to select MPEG Noise
Reduction and then press < or > to select
either Off, Low, Middle or High and then
press @=).
then press re).
To revert to the factory defaults, highlight
Reset and then press gs).
Using the Game Mode feature
You can use the Game Mode feature for shorter
frame delays when playing a video game requiring
split-second timing between the on-screen display
and input from the controller (such as music
creation and high-action games).
This feature 1s more effective for 4801 and 10801
input signals.
Note: To use the Game Mode feature, the
current video input must be Video,
ColorStream HD, HDMI 1, or HDMI 2. The
Game Mode cannot be turned on when any
other video input is selected.
To turn on Game Mode:
1 From the Picture menu, press A or Y to
select Game Mode.
2 Press dor pr to select On.
To turn off Game Mode:
Select Off in step 2 above, change the video input,
or turn the TV off and then on again.
Note: You can change the video input by
pressing ** on the remote control (1= Page
33).
Sensor
When the Auto Brightness Sensor feature 1s set to
On, the TV will automatically optimize the
backlighting levels to suit ambient light
conditions.
1 From the Picture menu, press 4 or 9
select Picture Settings and then press 6.
2 Press À or W to select Advanced Picture
Settings and then press gm.
3 Press 4 or ¥ to select Auto Brightness
Sensor and then press € or > to select On
or Off and then press 6.
4 To save the new settings, highlight Done and
then press gms).
To revert to the factory defaults, highlight
Reset and then press fm
N 2 .
51
Using the advanced audio
settings features
Using the QSound® sound feature
QSound® is the original name for a positional
three-dimensional (3D) sound processing
algorithm from QSound Labs, Inc. that creates 3D
audio effects from multiple monophonic sources
and sums the outputs to two channels for
presentation over regular stereo speakers.
To adjust the QSound” settings:
1 Set the TV in Stereo mode (£7 “Selecting
stereo/SAP broadcasts” on Page 40).
2 From the Sound menu, press 4 or W
select Advanced Audio Settings and then
Press fr).
3 Pres À or W to select the QSound feature
and then press «df or > to tum the QSound
effect On or Off.
then press Go.
To revert to the factory defaults, highlight
Reset and then press gr.
Note: If the broadcast is monaural, the
QSound effect will not work.
52
Using the Media Player
The TV allows you to enjoy photos and music
stored on a USB device.
Note: Do nof insertremove the USB device
while in use.
Media Player Specifications
Device
USB device:
USB Mass Storage Class devices (MSC)
Note:
«Connectivity is not guaranteed for all
devices.
«Connect the USB device to the TV
directly.
Do not use a USB hub.
Supported file system
FAT 12, FAT16 and FAT32
Supported photo format:
JPEG Exif ver 2.2 (DCF ver 1.1)
+ Maximum viewable resolution: 8192 x 8192
pixels
* Maximum photo size: 9 MB
Note: It may fake some time to open a file of
large size.
Supported music format:
MPEG-1 (MP3)
* Sampling rate: 32, 44.1, 48 kHz
* 123: уег. 1, уег.2
Folder specifications
* Total number of files: Less than 2000 per folder
You must obtain any required permission from
copyright owners to download or use copyrighted
content. Toshiba cannot and does not grant such
permission.
Basic Operation
To set Auto Start:
1 From the Setup menu, press 4 or W
select Media Player and then press fom
2 Press 4 or Y to select Auto Start and then
press Ǥ or > to select On.
Auto Start:
1 Insert USB device into the USB terminal on
the left side of the TV.
2 A prompt will appear. Press
Yes and then press 6).
3 Press 4 or ¥ to select Photo or Music and
then press &«. The photo thumbnail view or
music list will appear.
or > to select
Note: If Auto Start is set to Off, you can start
the Media Player manually.
To set manual Start:
1 Insert USB device into the USB terminal on
the left side of the TV.
2 From the Setup menu, press 4 or W to
select Media Player and then press € >
3 Press 4 or y to select Photo or Music and
then press em. The photo thumbnail view or
music list will appear.
To close the Media Player:
Press Hea The TV will return to the last-viewed
channel or video input.
Viewing JPEG files
To view in Single View mode:
1 From Media Player menu, press A or Y to
select Photo and then press om.
2 When the thumbnail view appears, press A
Y or P to select a file or folder.
Note: An incompatible JPEG file will be
displayed with an wn |
3 Press Em) to begin viewing the selected file 1n
full screen or to open the selected folder.
4 Press > to view the next file, or press < to
view the previous file.
To view in Slide Show mode:
1 To switch to the Slide Show mode, press fs)
while in Single View mode.
To return to Single View mode, press és
again.
2 Press Bp to view the next file, or press < to
view the previous file.
To rotate the image:
While viewing the image 1n Single View mode,
press A to rotate the image 90 degrees clockwise,
or press Y to rotate the image 90 degrees
counterclockwise.
To return to the thumbnail:
Press "2" while in Single View mode or Slide
Show mode.
53
To use the photo Quick Menu:
You can select your preferred photo viewing
settings from the photo Quick Menu.
1 From the photo Single View, Slide Show or
MENU
thumbnail mode, press 5% to enter the Quick
Menu.
Note: The Quick Menu items of thumbnail
and Single View/Slide Show modes are
different.
2 Press 4 or W to select the item you want to
adjust.
3 Press dor to select your preferred setting.
4 Press" to return to the previous photo view
mode.
Sort* To set the file sorting preference
in thumbnail view.
* Title: to sort the files by file
name.
* New: to sort the files from new
to old by file date.
+ Old: to sort the files from old to
new by file date.
To set a time interval to view
photos at your preferred
intervals (3sec, 5sec, 10sec,
15sec, 30sec, 60sec, or 90sec).
To display photos 1n the same
Interval Time
Repeat tolder repeatedly (On/Off).
To select background music for
Background the photo display from the music
Music Select** stored in the USB device (15°
right column).
To set the sleep timer to turn off
the Media Player, as well as the
TV (up to 180 minutes in 10-
minute increments).
Steep Timer**
Note: The sleep timer setting in the Media
Player Quick Menu or TV Setup Menu will
override the previous setting of each other.
* This Quick Menu item is only available for access
from the thumbnail view mode.
** This Quick Menu item is only available for access
from Single View/Slide Show modes.
54
To set background music for photo mode:
You can select music from the music list stored 1n
the USB device to be played back in photo mode.
1 From the photo Single View or Slide Show
mode, press se to enter the Quick Menu.
2 Press À or y to select Background Music
Select and then press (my.
The available music list will appear.
3 Press 4 or W to select your desired music
and then press e to play the music.
4 Press EM repeatedly to return to the previous
photo mode with the selected music on.
Note: The music will be played back in
accordance with the repeat setting set in the
music Quick Menu (x= Page 55).
Listening to MP3 files
Besides viewing JPEG files, you can also listen to
the music files stored in the USB device.
1 From Media Player menu, press A or W
select Music and then press gw)
to select
2 When the list appears, press A or 9
a file or r folder.
3 Press gm to begin playmg the selected music
file or to open the selected folder.
To use the remote control button in music
playback:
You can use the remote control buttons listed
below to control the music playback.
Begins music playback.
STOP Q :
Stops music playback.
Pauses music playback.
CLOSED CAPTION vf" . ~-
SKIP Skips to play next music file.
SKIP Skips to play previous music
SKIP
Note: If no button on the remote control or TV
control panel is pressed for 60 seconds after
starting music playback, the TV will enter
screen saver mode. Press any button but
POWER to return to music list mode.
To use the music Quick Menu:
You can select your preferred music playback
settings from the music Quick Menu.
1
From the music list or music playback mode,
press ## to enter the Quick Menu.
à
#
Note: The Quick Menu items of music list
and music playback modes are different.
Press A or W to select the 1tem you want to
adjust.
Press € or > to select your preferred setting.
RETURN
Press "*" to return to the previous menu or
music mode.
Sort” To set the file sorting preference
ın music list.
* Title: to sort the files by file
name.
* New: to sort the files from new
to old by file date.
+ Old: to sort the files from old to
new by file date.
* /f Enable REGZA-LINK in the REGZA-
LINK Setup menu is set fo Off or no
amplifier is detected, the Speaker item will
be grayed out.
Repeat To set preferred music repeat
mode.
* |: to repeat the current playing
music file.
» All: to repeat all the music files
in the folder where the current
playing file 1s.
* Off: to disable music repeat.
Audio To adjust the audio quality
Settings** (Bass/ Treble/Balance).
Sicep Timer*
*
To set the sleep timer to turn off
the Media Player, as well as the
TV (up to 180 minutes in 10-
minute increments).
Speaker** To select the audio output
preference.
* TV Speakers: to output the
music from the TV’s built-in
speakers.
* Audio Receiver: to output the
music from a connected
amplifier (if available).
Note:
* The sleep timer setting in the Media Player
Quick Menu or TV Setup Menu will override
the previous setting of each other.
* This Quick Menu item is only available for access
from the music list.
** This Quick Menu item is only available for access
from music playback mode.
55
Disc playback
This section shows you the basics on how to play a
disc.
Basic playback (DVD/VCD/CD)*
1 Press POWER on the TV control panel or on
the remote control.
The Power LED on the front of the TV
changes to green. It may take approximately
10 seconds for a picture to appear on-screen.
When using an amplifier, switch on the
amplifier.
2 Press "E” on the remote control to switch to
DVD mode.
The DVD start-up screen will appear
on-screen.
3 Hold the disc by its edges and load it in the
disc slot with the label side facing forward.
The prompt “Insert Disc” changes to
“Reading” and then playback starts.
Note: DO NOT touch the surface of the
disc. This may leave a smudge that can
cause playback errors.
If the disc has 1ts own menu, 1t will be
displayed on-screen. Press 4 Ÿ «€ or » on
the remote control to navigate the disc menu,
then press fs to implement the selected menu
option.
To adjust playback volume:
Press (&) le.
To temporarily suspend disc playback (still
mode):
Press "ASF,
To continue playback from still mode:
Press FLAY
To stop playback:
Press “TP.
56
Playback resume function:
Your TV/DVD supports playback resume function.
If you stopped the disc playback before 1t 15
completed, the TV/DVD records the stop pomt.
fe" appears on-screen. Press FEA to resume
playback on the stop pomt. If you press Y twice mn
quick succession or unload the disc, the TV/DVD
will clear the stop point.
Higher quality picture:
High resolution pictures on some discs may
occasionally cause noise on the picture display. If
this 1s the case, reduce the Sharpness setting
under the Picture Settings menu (vz Page 38).
Note:
* Keep your fingers well clear of the disc slot
when a disc Is loading or unloading. Failure
fo do so may cause serious personal injury.
* Do not move the TV during playback. Doing
so may damage the disc.
* When a disc is inserted when the TV is not
in DVD mode, the TV will automatically
switch to DVD mode.
* This indicates the kind of disc that can employ the
function described under that heading.
DVD : You can use this function with DVDs.
VCD : You can use this function with Video CDs.
CD : You can use this function with Audio CDs
and CD-R/RW discs.
Removing a disc
EJE
1 Press EJECT e on the TV contro! panel or
on the remote control.
2 Wait for the disc to be ejected and then remove
the disc from the slot.
Disc playback reminders
It the TV/DVD does not operate properly, static
electricity buald-up may be the cause. Turn off the
TV/DVD, then disconnect the power cord trom
the AC outlet. Reconnect the power cord, then
press POWER No to turn on the TV/DVD
again.
It an incompatible disc 1s loaded, one of the
following error messages appears on-screen:
“Incorrect Disc”, “Disc region incorrect” or
“Enter Password”. Tf this 15 the case, check your
disc again. Go to Page 8 for a list of supported
disc formats, and to Page 76 for playback-related
troubleshooting instructions.
In some instances the TV/DVD may take a
minute or so to start disc playback.
When you load a disc with the playback side
tacing backward, “Reading” appears on-screen
but 1t will be replaced by “Incorrect Disc”. Eject
the disc and load it again making sure the
playback side 1s now facing forward.
The playback resume function may not work on
some discs.
Some DVDs may have fixed playback operations
designed by the DVD manufacturer. Your TV/
DVD follows this fixed playback design. In such
cases, some playback features may not be
available. You may refer to the instructions
accompanying the DVD.
* Do not put any objects other than compatible
discs on the disc slot. Doing so may cause damage
to the TV/DVD.
+ There may be a few seconds between the action of
pressing a button and the function 1t activates.
Playing in fast reverse or fast
forward direction (DVD/VCD/CD)
1 Press REV << от FF #» during playback.
REV «<< : Fast reverse playback
FF »# : Fast forward playback
Each time you press REV << or FF Bp, the
playback speed changes.
To resume normal playback:
Press PRA.
Note:
+ The sound is muted during reverse and
forward scan.
+ The playback speed may differ depending
on the disc.
* You can use fast reverse/fast forward
playback for MP3, and WMA CDs.
Playing frame by frame (DVD/VCD)
1 Press PF during playback.
Each time you press "45%, the picture advances
one frame.
To resume normal playback:
Press PRA.
Note:
+ The sound is muted during frame by frame
playback.
Playing in slow motion (DVD/VCD)
1 Press SLOW «<f or SLOW } during
playback.
SLOW «f : Slow reverse playback
SLOW li»: Slow forward playback
Each time you press SLOW <{ or SLOW >,
the slow motion speed changes.
To resume normal playback:
Press PRA.
Note:
+ The sound is muted during slow motion
playback.
57
Locating a chapter or track (DVD/
VCD/CD)
1 Press SKIP «чот SKIP =P repeatedly to
display the chapter or track number you want
to play.
SKIP #1: To locate succeeding chapters or
tracks. Playback starts from the beginning of
the selected chapter or track.
SKIP ==: Playback starts from the
beginning of the current chapter or track.
When you press SKIP == twice in quick
succession, playback starts from the
begiming of the preceding chapter or track.
58
Zoom function/Scene navigation
You can change the viewing scale of a picture by
using the Zoom function. Once the image has been
rescaled, use the arrow buttons A Ÿ € > to pan
the image.
Scene navigation options differ depending on the
kind of disc. DVDs use the title, chapter or record
time to locate the start point for playback. Audio
CDs and Video CDs use the record time or track
number. To view the discs title/track or chapter/
track list, press "7",
Using Zoom (DVD/VCD)
INFET
1 Press: on during playback.
The v iow will zoom into the center of the
> INPUT
image. Each press of 5 will increase the scale
value: Q 1 (< 1.3), Q2( 1.5) and Q 3 (x
2.0).
2 Pres A Y < BP to pan the scene and view
different sections of the picture.
3 To return to normal view, in Zoom mode, press
INPUT
200 si repeatedly until Q Off appears.
Note:
* You can use the Pause, Slow and Search
playback functions in Zoom mode.
* Zoom function may not apply to some discs.
Locating a specific scene (DVD/VCD/
CD)
2 Press 4 or Y to select a navigation option.
3 Use the Channel Number buttons (0-9) to key
1n a value for the navigation option you
selected.
If you input a wrong number, press cite Reter
to the disc package to check the correct
number.
4 Press "EA to start playback.
Note:
* When you use title navigation, playback
starts from the first chapter of the selected
title.
* For audio CDs and Video CDs, you can
locate a scene by track number or record
time.
* For PBC-enabled VCDs, turn off the PBC
function first before using the Jump function
(Ez Page 64).
* Scene navigation may not apply to some
discs.
59
Scene bookmark
Scene bookmarks refer to specific points in the
playback range that have been marked tor later
access. You can create up to three markers per
disc.
Note: The saved scene bookmarks are only
accessible during the current session. Once
you eject the disc or turn off the TV/DVD, all
bookmarks will be cleared.
Bookmarking a scene (DVD/VCD/
CD)
1 During playback, press "2 at the scene
where you would like to place the bookmark.
3 Press AF to close the Bookmark window.
4 To save two more bookmarks, repeat steps 1-3.
Note:
* In some cases, subtitles for the marked
scene may not display.
* Bookmarking a scene may not apply to
some discs.
Viewing a scene bookmark (DVD/VCD/
CD)
1 Press "EF during playback mode.
2 Pres А ог
to select the saved marker.
3 Press gm to start playback on the scene saved
in the selected bookmark.
To delete a scene bookmark:
EXITS
Perform steps 1 and 2 above, then press ee.
Мм
60
Repeat playback/A-B repeat
You can choose to repeat DVD playback by title or
chapter. For audio CDs and Video CDs, you can
repeat a single track or the entire disc.
The A-B repeat function lets you repeat a specific
section between two set points. This section will
be played repeatedly until you turn off the A-B
repeat mode.
Enabling repeat playback (DVD/
VCD)
1 Press "0 during playback or stop mode.
2 [DVD]
Press gm repeatedly to select a repeat mode. It
can either be by Chapter or by Title.
The TV/DVD automatically starts
repeat playback after finishing
the current title or chapter.
[VCD]
Press VW to select Repeat, then press a
repeatedly to select a repeat mode. It can either
be Single or All.
The TV/DVD automatically starts
repeat playback after finishing
the current track.
El
TERE
Note: If you set the repeat mode during
stop mode, press “E to start Repeat
playback.
3 Press “3 again to close the Play Mode
window.
To resume normal playback:
Select Off in step 2 above.
Note:
* The Repeat mode 1s canceled when SKIP
<< or SKIP »»1 is pressed.
* The Repeat playback function may not
apply to some discs.
Enabling A-B repeat mode (DVD/
VCD/CD)
1 During playback, press at the point
where you would like the playback loop to
begin. This sets your “A” point.
REPEAT AB
2 When the playback reaches the point where
ba would like the playback loop to stop, press
The section between points À and B will be
played repeatedly in a loop until you turn off
the Repeat A-B mode.
To resume normal playback:
Press "618 until ÉZIOff appears on-screen.
Note:
* [In some cases, subtitles for the repeated
scene may not display.
* The A-B repeat mode may not apply to
some DVD scenes.
* The A-B repeat mode is not applicable to
interactive DVDs and JPEG CDs.
Programmed playback/Random
playback
You can program the playback sequence of tracks
on a Video CD. Or you can set the TV/DVD to
play tracks at random.
For procedures applicable to audio/MP3/WMA/
JPEG, go to Page 65.
Note:
* The programmed and random playback
modes are not applicable to PBC-enabled
Video CDs.
* The programmed and random playback
modes are only applicable during the current
session. Once you eject the disc or turn off
the TV/DVD, these modes will be disabled.
Programming the playback
sequence (VCD)
1 Press "o in stop mode.
2 Press A or W to select Mode, then press fom)
repeatedly to select Program.
i
su
uu x
3 Press < or > to go to the e right column. Press
A or Y to select the playback position, then
use the Channel Number buttons (0-9) to input
the track for that position.
To program other tracks, repeat this step.
If you input a wrong number, press enn,
A Mode - Program
| Repeat XT
| SAY
Program Playback
61
4 Press « or Bp to return to the left column, then
press A or Y to select Program Playback
and press fm).
: Program
Track playback will follow the sequence you
set 1n step 3.
To resume normal playback:
In step 2, set Mode to Normal.
To change the program:
1. Set Mode to Program.
2. Press 4 or Ÿ to select the playback position
you want to change the track input for, then
EXITS
press AE
. Use the ‘Channel Number buttons (0-9) to
input the new track for the selected position.
To remove a track from the programmed list:
1. Set Mode to Program.
2. Press A or Ÿ to select the playback position,
EXIT!
then press eme,
To clear all the programs:
On the left column, press 4 or W to select Clear
Program, then press fe).
Enabling random playback (VCD)
1 Press "5 in stop mode.
2 Press A or W to select Mode, then press €
repeatedly to select Shuffle.
Note: If you set random playback during
playback mode, random playback will
begin after the current track finished
playing.
To resume normal playback:
In step 2, set Mode to Normal.
62
Scene angle/Title selection/DVD
menu
Changing the scene angle (DVD)
When playing back a DVD recorded with multi-
angle scenes, you can select the scene angle that
you prefer.
1 Press Ff during playback.
2 Press MOE repeatedly until the preferred scene
angle 1s ; displayed.
Note: Depending on the DVD, you may not be
able to change the scene angle even if mulli-
angle data are recorded on the disc.
Selecting a DVD title (DVD)
Some DVDs contain two or more titles. If this 15
the case, you can select a particular title for
playback.
1 Press" during playback to display the title
ment.
2 Pres 4 W > to select the preferred title.
3 Press "LA or Ga to start playback.
LE Ne
Note:
* Title selection may not apply to some DVDs.
+ The title menu may simply be referred fo a
“menu” or “title” in the instructions supplied
with the DVD.
DVD menu (DVD)
Some DVDs have an encoded menu that allows
users to select a specific disc content, enabic a
particular DVD feature (e.g. subtitle or soundtrack
language), or choose a particular title (for multi-
title DVDs).
1 Press ™%" during playback.
2 Press 4 Y < № tosclect a DVD menu
item, then press gm or "EN to access it. Use the
same keys to enable an option tor the selected
item.
Repeat this step to configure other menu
options.
3 Press "9% again to resume playback on the
scene that was playing when you pressed
DVD MENU
EN,
Ми
Note: Depending on the DVD, you may not be
able fo resume playback from the same scene
that was playing when you pressed "7",
Soundtrack language/Audio
channel/Subtitle
Selecting a soundtrack language
(DVD)
You can select the soundtrack language when you
play a multilingual DVD.
During playback, press “87 repeatedly until the
preferred language track 1s selected.
Selecting the audio channel (VCD)
During playback, press **95 repeatedly until the
preferred audio channel 1s heard. Options include
Stereo, Left, Right, and Mix.
Note:
+ [fthe preferred language option is not heard
after selecting it for several times, that
language is not recorded on the disc.
* The soundtrack language selected is only
applicable for the current session. When you
stop playback and try to play the disc again,
the default language track will be used.
* [f you select the DTS option in DVDs with
DTS feature, no sound will be heard from the
TV/DVD's speakers. You need to connect
an amplifier equipped with a DTS decoder fo
the Optical digital audio out jack.
Viewing subtitles (DVD)
When playing back a disc recorded with subtitles,
you can select the subtitle language or turn the
subtitle off.
To view subtitles:
Press #70" repeatedly during playback until the
preferred language 1s selected.
The Subtitle prompt will disappear after a few
seconds.
To disable subtitles:
SUBTITLE
O
Press until Off appears.
Note:
* Notall DVDs have encoded subtitles.
» The subtitle selection may revert fo the
default language when you stop playback
and try to play the DVD again.
+ [In some cases, the selected subtitle may not
display immediately.
back control
Viewing the playback info (DVD/VCD)
Press "E during playback.
DVD mode
Elapsed/remaining time Elapsed/remaining time for
for current title current chapter
e
Title no.
Chapter no.
Subtitie status (if on, will show language)
Audio type
Bit rate Scene angle status
VCD mode
Elapsed/remaining time Elapsed/remaining time for
for current disc current track
Track no. (if PBC is enabled, "PBC On” will be displayed)
To close the information display:
Press C3 ©
Note: Depending on the disc, this operation
may not be available.
63
Turning off the PBC function (VCD)
1 Press “o in stop mode.
2 Press 4or
repeatedly until Normal appears.
to select Mode, then press fo
3 Press PLA to close the screen.
ne 2
To turn on the PBC function:
Follow steps 1 and 2 above, then press =
repeatedly until PBC appears.
When enabled, PBC allows interactive Video CD
playback using the remote control.
64
MP3, WMA, JPEG, and Audio CD operation
This TV/DVD can play MP3, WMA, and JPEG files recorded on a CD-R or CD-RW disc. To create the MP3/ WMA/
JPEG disc, you need a Windows PC with a CD-RW drive and file encoding software. You must use a Windows PC
to create the MP3/WMA/JPEG disc.
This TV/DVD requires discs/recordings that meet certain technical standards in order to achieve optimal playback
quality. There are many different types of recordable disc formats (including CD-R discs containing MP3 or WMA
files). Not all recordable discs will produce optimal playback quality. The technical criteria set forth in this owner's
manual are meant only as a guide. Use of CD-RW discs for recording MP3 files is not recommended.
You must obtain any required permission from copyright owners to download or use copyrighted content. Toshiba
can not and does not grant such permission.
MP3/WMA/JPEG/Audio CD information (CD)
MP3/WMA/JPEG CD playback reminders
Make sure the file name of the MP3, WMA, and JPEG files in the CD includes the 3-character file extension (*mp3”,
“wma”, “ipg”, “div”, and “avi”) to make it compliant with the ISO 9660 standard.
This TV/DVD can read 2000 files per disc. If a disc has more than 2000 files, it reads the first 2000 files, while the
remaining files will be omitted.
To play the files in sequence based on the recorded order:
— Use an encoding software that records data alphabetically or numerically.
— Include a two- or three-digit number prefix on the file name (ex. “017 “02” or “0017 “002”.
— Refrain from making too many sub-folders.
lt may take more than one minute for this TV/DVD to read MP3, WMA, and JPEG files depending on the disc
structure.
Audio files recorded using the Joliet Recording Specification can be played back in this TV/DVD. The file name is
displayed (up to 15 characters). Longer file names will be condensed.
Music recorded based on the “Joliet Recording Specification” can be played back, the file name is displayed (within
15 letters) on the screen. Long file names will be condensed.
This TV/DVD does not support data disc burned using the Apple Mac OS (Hierarchical File System, HFS format).
MP3/WMA/JPEG CDs cannot be used for recording purpose.
File name display reminders
The maximum number of characters for file name display is 15.
Only the following characters will be displayed: A through Z (both upper and lower case), 0 through 9, and the
underscore symbol (_).
Non-supported characters will be replaced with a hyphen {-).
MP3/WMA/JPEG CD limitations
Depending on the recording conditions, some MP3/WMA/JPEG CDs cannot be played back in your TV/DVD.
Only MP3, WMA, and JPEG files recorded in the CD-R/RW disc will be played. Other files will not be read nor
displayed.
MP3/WMA file encoding information
MP3
— File format: MPEG-1 Audio
— Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
— Bitrate: 32 to 320 kbps (constant bit rate or variable bit rate)
The recommended recording setting for high-quality sound is 44.1 kHz sampling frequency and 128 kbps constant
bit rate.
WMA
— File format: WMA version 7 or 8
— Sampling frequency: 32 kHz / 48 kbps, 44.1 kHz / 48 to 92 kbps, 48 kHz / 128 to 192 kbps
A file recorded in mono (48 kHz / 48 kbps) is not supported by this TV/DVD.
Microsoft, Windows Media, and Windows Logo are elther registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
65
About the file browser (CD)
Operation status Scroll bar Filename of
| selected item
> 3/15 00:00:00
@ ANMA-11.WM
Option
panel
File list —
Selection highlight Preview pane
File icons
>) Music file (MP3/WMA/Audio CD track)
Picture file (JPEG)
Ita CD contains a mixture of MP3, WMA and
file, playback automatically begins starting from
the first file in the list.
Setting the file type listing
You can choose the type of files listed 1n the file
browser.
1 Press pp to move the selection highlight to the
Option panel.
2 Press 4 or Y to highlight Select files, then
press Ema.
3 Press 4 or ¥ to select a file type from the list
4
— Audio or Photo.
Press gx) to add or remove the check mark
next to ‘each file type. Checked file type will
be displayed in the file browser.
5 Press df twice to move the selection highlight
back to the file list.
Viewing image files in thumbnail mode
You can change the browsers view mode from list
mode to thumbnail mode. This 1s convenient when
browsing for JPEG files.
1 Press MG
2 Pres 4 Y « № to select an image file.
To return the browser to list mode:
To view the previous or next thumbnail page:
Press SKIP Laa or SKIP à
66
Playing an audio file (CD)
1 Loadan MP3/WMA/Audio CD 1n the disc
siot.
The file browser appears on-screen. It may
automatically play by composition of an
audio file.
2 Press 4 or W to select another audio file for
playback.
а НОО НОНО аН СНЫ Я
Select files
3 Press 4 or 6 to start playback.
в
F5
To stop playback:
o
BE
Press
press stop twice in quick succession or unload the
disc, the TV/DVD will clear the stop point.
Note:
+ Ifthe current directory has more than eight
files, press A or Y to scroll the file list.
+ To see folder contents, select a folder and
then press em)
* Toretumn to the root directory, press" Tor
select “Go Up... “then press Ena.
change the thumbnail size.
* The Repeat and Random/Programmed
playback modes can be enabled during MP3
or WMA playback. Refer fo Page 68.
Viewing a JPEG file (CD)
1 Load a disc containing JPEG files in the disc
slot.
The file browser appears on-screen.
2 Press 4 or ¥ to select an image file for view.
A preview of the selected file 1s displayed in
the Preview panel.
3 Press Ge or PRAY.
The selected 1mage 15 displayed in full-screen
mode.
Press SKIP Laa or SKIP BB to view the
previous or next image file in the current
directory.
To rotate an image:
Press *9E repeatedly until the preferred angle 1s
obtained. The image angle 1s adjusted 1n 90°
Increments.
The current angle setting is shown on-screen: 90°,
180°, 270°. or No rotation.
To magnify an image:
Press 60 repeatedly until the image 1s displayed 10
the preferred scale.
The current zoom setting 1s indicated by the
following icons: Q 1 (< 1.3), Q 2 (< 1.5) and Q 3
(x 2.0).
To return to normal view:
INPUT
Press 2001
repeatedly until Q, Off appears.
Viewing a slide show (CD)
If there are multiple JPEG files m the selected
directory, you can view them In a slide show. For
Instructions on how to enable the slide show
feature and set the interval period between
pictures, go to Page 72.
1 Open the file folder containing the JPEG files
you want to include 1n the slide show.
2 Press À or W to select the file you want to be
the starting image for the slide show.
A preview of the selected file 1s displayed in
the Preview panel.
E
& /Ficture-01,1PG
3 Press em or PAT,
The selected image is displayed in full-screen
mode.
When the slide show 1s completed, the file
browser appears.
To view the previous or next image in the
slide show:
Press SKIP = or SKIP pp}.
To temporarily stop the slide show:
Press P85. “Jf” appears briefly on-screen. Press P24
or SKIP eli to resume the slide show. |
To stop the slide show:
Press 927. The file browser appears.
Note:
* The Rotate and Zoom modes are available
in regular JPEG viewing and slide show
modes.
* The Jump and A-B repeat modes are not
available when viewing JPEG images.
+ During a slide show, the interval time
between images may increase If the file size
is too big.
* When an image exceeds 5/60 x 3840
pixels, the image display can appear
cropped. This applies when viewing the
image in the Preview panel of the file
browser; or when in the thumbnail, full-
screen, or slide show modes.
67
playback modes
You can choose to repeat CD playback by track or
the entire disc. You can also program the file
playback sequence or set the TV/DVD to play files
at random.
Note: These playback modes are only
applicable during the current session. Once
you eject the disc or turn off the TV/DVD,
these modes will be disabled. Pressing SKIP
la or SKIP wei during playback will also
cancel these modes.
Enabling repeat playback (CD)
1 During stop mode, in the Option panel of the
file browser, press 4 or ¥ to select Repeat.
2 Press & repeatedly to select a repeat mode,
Track or All.
7
3 Press PLAY
The TV/DVD automatically starts repeat
playback after finishing the current track.
To resume normal playback:
Select Off in step 2 above.
68
Enabling random playback (CD)
1 During stop mode, in the Option panel of the
tile browser, press & or Ÿ to select Mode.
3 Press "EN.
The TV/DVD automatically applies the
shuffle mode.
To resume normal playback:
Select Normal in step 2 above.
Note: When the Music Intro mode is
enabled, the first 10 seconds of an audio track
is played. This is useful if you are simply
looking for a particular track in a list.
Programming the playback
sequence (CD)
1 In the Option panel of the file browser, press
to select Edit Mode, then press eu.
2 Press «to return to the file list and press 4 or
to select a file, then press (my to mark 1t for
inclusion in the programmed playlist. A check
mark will appear next to the file.
Repeat this step to mark any other files you
want to add in the programmed playlist.
3 In the Option panel, press À or y to select
Add To Program, then ргез5 (=) 10 add the
marked files in the programmed playlist
4 Press & or
press em) to disable 1t.
5 Press 4 or Y to select Program View, then
press foe).
Program View
In Program view, only the files you added in
step 3 are displayed.
Browser View
6 In the programmed file list, press A or Y to
select a file, then press EY to start playback.
(TED
1
2. In Program view, press A Y < P to select
Edit Mode on the Option panel, then press
Ena) to enable 1t.
3. Press € to go to the programmed list.
4. Press A № to select the file you want
to remove, then press exi.
5. Repeat step 4 to mark any other files you
want to remove from the list.
6. Press > to go to the Option panel.
Press A or Ÿ to select Clear Program,
then press fu).
69
You can customize the disc playback settings to
suit your preferences.
Configuring the disc playback
settings (DVD/VCD/CD)
1 In DVD mode, press si during stop mode.
Menu ‘English
Subtitle :English
Audio :English
OSD :English
-
2 Press 4 or W to select a setup tab, then press
D> . The first setup option is highlighted.
Picture Mode Auto
JPEG Interval (Off
3 Press 4 or ¥ to select the setup option you
want to customize.
4 Press № ог er to display a list of available
option settings.
5 Press A or W to select an option setting, then
press em) to apply and save it.
Go to Page 71-74 tor list of description for
each option setting.
6 To configure another option on the same setup
tab, repeat steps 3-5.
To configure an option on another tab, press
4. then use 4 or W to select a setup tab.
Repeat steps 3-5 to configure the preferred
option.
7 To close the Setup screen, press i or su,
70
Disc playback setup
uage
nguage
a uage
nguage tup screen
Displa to a status y
pay a button is pressed.
source content.
JPEG Interval hterva tween images in a
show
ogg on or off.
t output
corresponding to your audio connection.
Digital Out
renta a content.
access parenta
Password
control setting.
Note: These setup settings are retained in the TV/DVD's memory. It remains active even if the
power is turned off.
74
к Menu ‘English
= Subtitie English
, Audio ‘English
e | OSD :English
| Picture Mode Auto
JPEG Interval Off
Select the language for the DVD and Setup
menu display. Options include: English,
French, and Spanish.
@ Subtitie / Audio
Select the language for the subtitle display
and audio track output during disc playback.
English The selected language will
be heard or seen.
French
Spanish
Auto (Subtitie) The TV/DVD will display the
subtitle in the disc's default
language.
Off (Subtitie) There will be no subtitle
display.
Note: If the selected language 1s not
available, the default disc language will be
used.
72
@ Display
Choose whether to show a status display
whenever a button is pressed.
Off There will be no on-screen display.
On There will be on-screen display
when any button is pressed.
Mm Picture Mode
The source content of a DVD can either be
recorded in: film format (images are
recorded at 24 frames per second) or video
format (images are recorded at 30 frames
per second).
Auto The TV/DVD automatically detects
the type of source content and
converts that signal in an appropriate
method based on the current aspect
ratio of the TV/DVD. This option will
normally suit most DVDs.
Film Suitable for playback of DVDs
recorded in a film format.
Video Suitable for playback of DVDs
recorded in a video format.
Note: If picture appears cut off or doubled,
select the “Video” setting.
№ JPEG interval
Select the interval time between images
during a JPEG slide show.
Off Slide show option is disabled.
5,10, or 15 Images will be displayed in a
seconds slide show using the selected
interval time.
Off
Bitstream
:Off
:Change
sm Night Mode
Select to toggle the Night Mode feature on
or off. When enabled, this function allows
for automatic volume level adjustment for
audio that may be too low (e.g. whispered
dialogues) or too high (e.g. a thunderstorm
scene).
Off Audio retains its disc recording
volume level.
On Volume level is automatically
adjusted depending on the scene
content.
Note: The Night Mode feature is only
applicable to Dolby Digital-featured DVDs.
The adjusted sound level depends on the
DVD encoding.
sm Digital Out
Select the sound format of the digital output
depending on the enabled signal
connection.
Off Disables digital sound output.
Select this option when
there’s no equipment
connected to the optical
DIGITAL AUDIO OUT jack.
PCM Changes Dolby Digital output
to PCM. Select this option
when using a two-channel
digital stereo amplifier.
Bitstream Select this option to output
the signal in its native format.
Note: MPEG audio will always be in PCM
format regardiess of the Digital Output
setting.
@ Parental
A DVD is usually encoded with a rating
level to indicate the recommended
audience age. You have the option to select
the content rating level allowed for
playback in your TV/DVD.
You will be prompted to key in the system
password to access this settings option.
Press А ог \ to select the allowable rating
level, then press enw).
Off No playback restriction. All
discs can be played regardless
of content rating.
Level 1-5 Discs of varied non-adult ratings
will be played back. The higher
the number, the more severe
the content is.
Level 6-8 Discs of varied adult only
ratings will be played back.
Note:
* The Parental rating levels correspond to
the US movie ratings.
Level 1 — Kids Safe Level 5 —- PG-R
Level 2 — С Level 6 — R
Level 3 — PG Level 7 — NC—17
Level 4 — PG—13 Level 8 — Adult
* Some discs may not have their rating
level encoded on the disc though it's
indicated on the disc jacket. Playback
restriction will not apply to these discs so
make sure to restrict access fo it
manually.
73
To temporarily cancel the parental
restriction:
1) Load the restricted content DVD that you
want to play.
2) Use the Channel Number buttons (0-9)
to input the system password after the
“Enter Password” message, then press
as.
This suspension of the parental restriction
setting applies until disc is ejected.
E Password
Select this option to change the access
password for the parental control setting.
1) Press 4 or ¥ to select Password,
then press om).
2) Use the Channel Number buttons
(0-9) to input the current password,
then press om).
if the password has not been set yet
key in “0000”. This is the factory
default password.
3) Use the Channel Number buttons
(0-9) to input the new password, then
press fu).
You will be prompted to confirm the
new password.
4) Use the Channel Number buttons
(0-9) to input the new password
again, then press 63.
5) Press em) one last time to confirm the
changed password. Note this new
password for future reference.
If you forget the system password:
1) Make sure there is no disc in the disc
slot.
2) Press and hold down “4” on the
remote control, then press VOLUME-
on the TV control panel.
The “Initializing” message appears
on-screen to indicate that the
password has been reset to its default
factory setting “0000”. All DVD Setup-
related settings will also be reset to
their default factory values.
74
General troubleshooting
Betore calling a service technician, please check
this chapter for a possible cause of the problem
and some solutions you can try.
Biack box on-screen
* The closed caption feature is set to one of the
Text modes (T1, T2, T3, or T4). Setthe closed
caption feature to Off (I Раде 39).
TV stops responding to controls
* |f the TV stops responding to the controls on
the remote control or TV control panel and you
cannot turn off the TV, press and hold
POWER onthe TV control panel for 5 or more
seconds to reset the TV.
+ |f you cause a static discharge when touching
the TV and the TV fails to function, simply
unplug the TV from the AC outlet and plug it
back in. The TV should return to normal
operation.
Other problems
* |f your TV's problem is not addressed in this
Troubleshooting section or the recommended
solution has not worked, use the Reset
TV will not turn on
* Make sure the power cord is plugged in, and
then press POWER.
* The remote control batteries may be dead.
Replace the batteries or try the control panel
buttons.
Picture problems
General picture problems
+ Check the antenna/cable connections (Es
Chapter 2).
* Press “# on the remote control or the TV and
select à ‘valid video input source (8 Page
33). if no device is connected to a particular
input on the TV, no picture will display when
you select that particular input source. For
device connection details, see Chapter 2.
* Antenna reception may be poor. Use a highly
directional outdoor antenna (if applicable).
* The station may have broadcast difficulties.
Try another channel.
* Adjust the picture qualities (£55 Page 38).
Video Input Selection problems
* If the Input Selection window does not
appear when you press o on the remote
control or the TV control panel, press “ a
second time, which will change to the next
video input source and display the input
Selection window.
Cannot view external signals or channel! 3 or 4
* If you cannot view signals from external
devices connected to Video, ColorStream
HD, HDMI 1, HDMI 2, PC or from channels 3
or 4, make sure the Input Lock is set to Off
(Es Page 45).
Noisy picture
* |f you are watching an analog channel (off-air
broadcast or Cable TV), you can set the
CableClear” feature to reduce visible
interference in the TV picture (5 Page 51).
Poor color or no color
+ The station may have broadcast difficulties.
Try another channel.
* Adjust the Tint and/or Color (£37 Page 38).
Poor composite picture
+ |fF the TV is connected to an external A/V
device (e.g., DVD player, video game system,
set-top box, etc.) try using a ColorStream or
HDMI video connection instead.
Picture and sound are out of sync
* As with all products that contain a digital
display, in rare instances, when viewing
certain content (e.g. television broadcasts,
video games, DVDs), you may notice that the
sound and picture are slightly out of sync. This
phenomenon can be caused by various
factors including, without limitation, video
processing within the TY, video processing in
an attached gaming system, and video
processing or different compression rates
used by broadcasters in their programming.
You may want to try one or more of the
following suggestions, which may help to
reduce the effect of this phenomenon:
- Hthe TV is connected to an A/V receiver
that has a programmable audio delay
feature, use this feature to help synchronize
the sound to the picture.
If you notice this phenomenon only on
certain TV channels, please contact your
local broadcast, cable, or satellite provider
to inform them of this issue.
Sound problems
+ Check the antenna/cable connections (E="
Chapter 2).
* The station may have broadcast difficulties.
Try another channel.
* The sound may be muted. Press VOLUME.
* |f you hear no sound, try setting the MTS
feature to Stereo mode (f= Page 41).
* |f you are not receiving a second audio
program from a known SAP source, make
sure the MTS feature is set to SAP mode (1
Page 41).
* If you hear audio that seems incorrect for the
program you are watching (such as music or a
foreign language), the SAP mode may be on.
Set the MTS feature to Stereo mode (555
Page 41).
* |f you connect a PC using either the PC IN
terminal or an HDMI terminal, make sure that
the PC Audio setting is properly set (1 Page
46).
Remote control problems
* Remove all obstructions between the remote
control and the TV.
* The remote control batteries may be dead.
Replace the batteries (55° Page 24).
75
* If the TV still does not act as expected, use
the Reset Factory Defaults procedure (1
Page 32).
Channel tuning problems
* The channel may be blocked by the Channel
Options feature. Unblock the channel
(17 Page 30).
* If you are unable to tune digital channels,
28). If you are still unable to tune digital
channels, use the Reset Factory Defaults
procedure (= Раде 32). Also see “TV stops
responding to controls” and “Other problems”
(25° Раде 75).
Media Player problems
* Make sure that devices are connected
correctly.
* If vou connect a USB device with separate
cable or through USB hub, the TV does not
recognize the USB device.
Closed caption problems
* If the program or video you selected is not
closed captioned, no captions will display (£5
Page 39).
* if text is not available, a black rectangle may
appear. If this happens, turn off the closed
caption feature (I Page 39).
* A closed-caption signal may not display
correctly in the following situations: a) when a
videotape has been dubbed; b) when the
signal reception is weak; or c) when the signal
reception is non-standard (£55 Page 39).
Rating blocking (V-Chip) problems
* If you forget your PIN code: While the PIN
code entering screen is displayed, press "E"
fourtimes within 5 seconds. The a code you
* The V-Chip feature is available for the U.S.
V-Chip system only (E Page 43).
No REGZA-LINK® operation
* The REGZA-LINK® feature is available for
Toshiba REGZA-LINK* compatible devices.
* Make sure the HDMI cables with the HDMI
Годо ( SEE} ) are used.
+ When the connected REGZA-LINK® device
does not work correctly after you have
changed settings of the device, turn off your
TV and unplug the power cord, and then plug
and turn on again.
* if several devices are connected, REGZA-
LINK® feature may not operate properly.
* Read the instruction manual furnished with
the connected REGZA-LINK* device.
HDMI problems
For HDMI cables
+ Make sure to use cables with the HDMI Logo
( Bd 1) (15° Page 17).
For Legacy HDMI source
* Some legacy HDMI sources may not work
properly with the latest HDMI TV products,
due to new standard adoption.
76
Disc playback problems
Playback does not start
* No disc is loaded.
* The disc may be dirty. Clean the disc.
+ The disc format is not supported (7 Page 8).
No picture
* The TV is not in DVD mode.
No sound
* The TV is in the special playback mode (1=-
Page 57).
* If an external speaker is connected, check its
volume control.
Picture distortion during fast reverse/forward
playback
* The picture will be distorted occasionally. This
is normal.
Playback features failure
+ The playback features such as stopping,
searching, slow motion play, repeat play or
programmed play, etc are not applicable to all
discs.
Playback does not start when the title 1s
selected
* The disc may not be compliant with the
“Parental” setting (855° Page 73).
The audio soundtrack and/or subtitle
language cannot be changed
* The disc has no multilanguage option
encoded on it (ES Page 63).
No subtitle
* The disc has no subtitle encoded on it.
* Subtitles are disabled. Press “(5 (15° Page
63).
Scene angle cannot be changed
+ The disc has no multiangle scenes (£ Page
62).
“X” appears on the screen
* The function is not applicable to the disc or to
the current mode (55° Page 7).
LED Indication
The Power LED light on the TV front indicates the
TV's status, as described below.
LED Indication
Power LED
* Green is ON (solid)
The TV 1s operating properly.
* Red is ON (solid)
The TV 15 in Standby mode.
If, after trying the solutions, the problem still
exists:
In the U.S., call TACP Consumer Solutions at
1-800- 631-3811.
77
Specifications
Note:
* These models comply with the specifications
listed below.
* Designs and specifications are subject to change
without notice.
* These models may not be compatible with
features and/or specifications that may be added
in the future.
Television System
NTSC standard
ATSC standard (8VSB)
Digital Cable (64 QAM, 256 QAM; in-the-clear,
unencrypted)
Channel Coverage
VHF: 2 through 13
UHF: 14 through 69
Cable TV: 1-135 (4А, А5--А-1)
A-1, J-W
W+1--W+94
Power Source: 120 V AC, 60 Hz
Power Maximum Current
ISCVIOOUI0IU: O6GA
19СУ 1000: 0.7 А
22СУ 10008: 10 А
26С\У 10008: 13 А
32CV100U: 1.8 À
Power Consumption (in standby mode)
15CV100U/10IU: 08 W
19СУ 1000: 0.8 W
22СУ 10008: 0.8 W
20CVI00U: 0.8 W
32CVi00U: 0.8 W
Audio Power
15CV100U/101U: 3W+3W
19CV100U: 3W + 3W
22CV100U: 3W +3W
26CV100U: SW + 5W
32CV100U: 10W + 10W
Speaker Type:
15CVI00U/10IU: 70 x 30 х 26 mm
19СУ 1008: 70 х 30 х 26 mm
22СУ 1000; 70 x 30 x 26 mm
26С\У 1000: 167 x 45 x 37 mm
32CV100U: 167 x 45 x 37 mm
Video/Audio Terminals
VIDEO/AUDIO INPUT:
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 500 mV(rms) (30% modulation
equivalent, 47 k ohm or greater)
78
ColorStream® (component video) HD INPUT:
VIDEO:Y: 1 V{(p-p), 75 ohm, negative sync.
Pr: 0.7 V(p-p), 75 ohm
Pr: 0.7 V(p-p), 75 ohm
Suggested formats: 10801, 720p,
480p, 4801
AUDIO: 500 mV (rms), 47 k ohm or greater
HDMI™ INPUT:
HDMI compliant
HDCP compliant
Audio Lip Syne supported
HDMI Audio: 2-channel Linear-PCM; 32/44.1/
48 kHz sampling frequency; 16/
20/24 bits per sample
DIGITAL AUDIO OUTPUT: Optical type
PC INPUT: i5-Pin D-sub Analog RGB
DVD/CD player
Signal system: NTSC
12 cm, 8 em
i-lens, 2-beams
Supported disc size:
Pickup mechanism:
Dimensions (including foot stand)
iSCVI00U:101U: Width: 15.9 ches (403.1 mm)
Height: 12.6 inches (320.7 mm)
Depth: 5.6 inches (140.9 mm)
1 9CV100U: Width: 18.9 mches (480.9 mm)
Height: 14.4 inches (365.8 mm)
Depth: 8.5 inches (215.0 mm)
22CV100U: Width: 21.7 mches (552.3 mm)
Height: 15.9 inches (404.5 mm)
Depth: 8.5 inches (215.0 mm)
26CV100U: Width: 26.2 inches (666.0 mm)
Height: 19.3 mches (490.0 mm)
Depth: 10.2 mches (260.0 mm)
32CV100U: Width: 31.7 mches (804.6 mm)
Height: 23.2 inches (590.0 mm)
Depth: 10.0 mches (255.0 mm)
Mass (Weight)
1SCVIO0U/101U: 7.5 Ibs (3.4 kg)
19CV100U: 11.7 Ibs (5.3 kg)
22CV100U: 13.0 ibs (5.9 kg)
26CV100U: 19.4 ibs (8.8 kg)
32CV100U: 26.0 ibs (11.8 kg)
Operation Conditions
Temperature: 32°F - 95°F (0°C - 35°C)
Humidity: 20 - 80% (no moisture condensation)
Supplied Accessories
* Remote control with two size AAA
batteries
* AC power cord
* Owners manual (this book)
+ Cieaning cloth (to clean the cabinet
and control panel)
PC IN signal formats
Note: Depending on the connected PC, the following status may occur; incorrect display, false
format defection, picture position failure, blur, or judder. But this is not a malfunction of your TV.
VGA
640 x 480 59.940Hz 31.409kHz 25.175MHZ
SVGA 800 x 600 60.317Hz 37.879kHz 40.000MHz
XGA 1024 x 768 60.004Hz 48.363kHz 65.000M HZ
WXGA 1280 x 720 60.000Hz 45.000kHz 74.250MHz
1280 x 768 59.870Hz 47.776kHz 79.500MHz
1360 x 768 60.015Hz 47.712kHz 85.500MHZ
VGA
HDMI formats
640 x 480 59.940Hz 31.409kHz 25.175MHz
SVGA 800 x 600 60.317Hz 37.879kHz 40.000 MHz
XGA 1024 x 768 60.004Hz 48.363kHz 65.000MHz
WXGA 1280 x 720 60.000Hz 45.000kHz 74.250 MHz
1280 x 768 59.870Hz 47.776kHz 79.500MHz
1360 x 768 60.015Hz 47.712kHz 85.500MHz
4801 720 x 4801 59.940Hz 15.734kHz 27.000MHz
480p 720 x 480p 59.940Hz 31.409kHz 27.000 MHz
720p 1280 x 720p 60.000Hz 45.000kHz 74.250 MHz
10801 1920 x 10801 60.000Hz 33.750kHz 74.250 MHz
1080p 1920 x 1080p 24.000Hz 27.000kHz 74.250 MHz
1080p 1920 x 1080p 30.000Hz 33.750kHz 74.250 MHz
1080p 1920 x 1080p 60.000Hz 67.500kHz 148.500MHz
* Some illustrations in this owner’s manual are for explanation purposes and may differ from the actual unit.
* Designs and specifications are subject to change without notice.
+ This model may not be compatible with features and/or specifications that may be added in the future.
79
Limited United States Warranty
LCD TV/DVD Combination — Depot
Repair Warranty
Toshiba America Consumer Products, L.L.C. ( TACP”)
makes the following limited warranties to original
consumers in the United States.
THESE LIMITED WARRANTIES EXTEND TO THE
ORIGINAL CONSUMER PURCHASER OR ANY
PERSON RECEIVING THIS LCD TV/DVD
COMBINATION AS A GIFT FROM THE ORIGINAL
CONSUMER PURCHASER AND TO NO OTHER
PURCHASER OR TRANSFEREE.
LCD TV/DVD COMBINATIONS PURCHASED IN THE
U.S.A. AND USED ANYWHERE OUTSIDE OF THE
U.S.A. INCLUDING, WITHOUT LIMITATION, CANADA
AND MEXICO, ARE NOT COVERED BY THESE
WARRANTIES.
LCD TV/DVD COMBINATIONS PURCHASED
ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING,
WITHOUT LIMITATION, CANADA AND MEXICO, AND
USED INTHE U.S.A, ARENOT COVERED BY THESE
WARRANTIES.
Limited One (1) Year Warranty on Parts and Labor
TACP warrants this LCD TV/DVD Combination and its
parts against defects in materials or workmanship for a
period of one (1) year after the date of original retail
purchase. DURING THIS PERIOD, TACP WILL, AT
TACP'S OPTION, REPAIR OR REPLACE A
DEFECTIVE PART WITH A NEW OR REFURBISHED
PART WITHOUT CHARGE TO YOU.
Rental Units
The warranty for LCD TV/DVD Combination rental units
begins on the date of the first rental or thirty (30) days
after the date of shipment to the rental firm, whichever
comes first.
Commercial Units
LCD TV/DVD Combinations sold and used for
commercial purposes have a limited warranty for all
parts and labor, which warranty begins on the date of
original retail purchase and ends on the date that is
ninety (90) days thereafter.
Owner’s Manual and Product Registration Card
Read this owner's manual thoroughly before operating
this LCD TV/DVD Combination.
Complete and mail the enclosed product registration
card or register your LCD TV/DVD Combination online
at www.tacp.toshiba.com/service as soon as possible.
By registering your LCD TV/DVD Combination you will
enable TACP to bring you new products specifically
designed to meet your needs and help us to contact you
int the unlikely event a safety notification is required
under the U.S. Consumer Product Safety Act. Failure to
complete and return the product registration card does
not diminish your warranty rights.
80
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must retain your bill of sale or provide other
proof of purchase.
(2) All warranty servicing of this LCD TV/DVD
Combination must be made by the Depot Warranty
Repair Center specified by the TACP Consumer
Solutions Center.
(3) The warranties from TACP are effective only if the
LCD TV/DVD Combination is purchased and
operated in the Continental U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup,
adjustment of customer controls, and installation or
repair of antenna systems are not covered by this
warranty. Reception problems caused by inadequate
antenna systems are your responsibility.
(5) Warranties extend only {o defects in materials or
workmanship as limited above, and do not extend to
any LCD TV/DVD Combination or parts that have
been lost or discarded by you or to damage to the
LCD TV/DVD Combination or parts caused by fires,
misuse, accident, Acts of God (such as lightning or
fluctuations in electric power), improper installation,
improper maintenance, or use in violation of
instructions furnished by TACP; use or malfunction
through simultaneous use of this LCD TV/DVD
Combination and connected equipment; or to units
that have been modified or had the serial number
removed, altered, defaced, or rendered illegible.
How to Obtain Warranty Services
If, after following all of the operating instructions in this
manual and checking the section “Troubleshooting,” you
find that service is needed:
(1) For instructions on how to obtain warranty service for
your LCD TV/DVD Combination, contact TACP's
Consumer Solution Center toil free at 1-800-631-
3811.
(2) You must include a copy or original bill of sale or
other proof of purchase along with the entire LCD
TV/DVD Combination to the Depot Warranty Repair
Center specified by the TACP Consumer Solutions
Center. You are responsible for all inbound
transportation and insurance charges for the LCD
TV/DVD Combination to the Depot Warranty Repair
Center specified by the TACP Consumer Solutions
Center.
For additional information, visit TACP's website:
www.tacp.toshiba.com
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A., INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
LIMITED TO THE DURATION OF THE LIMITED
WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE
LAW OF ANY STATE OF THE U.S.A. AS HEREBY
LIMITED, THE FOREGOING WARRANTY |S
EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, GUARANTEES, AGREEMENTS, AND
SIMILAR OBLIGATIONS OF TACP WITH RESPECT
TO THE REPAIR OR REPLACEMENT OF ANY PARTS.
IN NO EVENT SHALL TACP BE LIABLE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, LOST PROFITS,
BUSINESS INTERRUPTION, OR MODIFICATION OR
ERASURE OF RECORDED DATA CAUSED BY USE,
MISUSE OR INABILITY TO USE THIS LCD TV/DVD
COMBINATION).
No person, agent, distributor, dealer, or company is
authorized to change, modify, or extend the terms of
these warranties in any manner whatsoever. The time
within which an action must be commenced to enforce
any obligation of TACP arising under the warranty or
under any statute or law of the United States or any
state thereof is hereby limited to ninety (20) days from
the date you discover, or should have discovered, the
defect. This limitation does not apply to implied
warranties arising under state law.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH MAY VARY FROM STATE TO STATE IN THE
U.S.A. SOME STATES OF THE U.S.A. DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, WHEN AN ACTION MAY BE
BROUGHT, OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE PROVISIONS MAY NOT APPLY TO YOU
UNDER SUCH CIRCUMSTANCES.
A copy of the GPL source code in this product may be
obtained by contacting Toshiba Consumer Solutions
at (800) 631-3811. There will be a charge to cover the
costs of providing the source code.
A copy of the LGPL source code in this product may
be obtained by contacting Toshiba Consumer
Solutions at (800) 631-3811. There will be a charge to
cover the costs of providing the source code.
Portions of this software are copyright © <2007> The
FreeType Project (www.freetype.org). All rights reserved.
This software is based in part on the work of the
Independent JPEG Group.
MPEG Layer-3 audio compression technology
licensed by Fraunhofer IS and THOMSON
multimedia.
81
The GNU General Public License (GPL)
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim
copies of this license document, but changing it is not
allowed.
Preamble
The licenses for most software are designed to take
away your freedom to share and change it. By contrast,
the GNU General Public License is intended to
guarantee your freedom to share and change free
software--to make sure the software is free for all its
users. This General Public License applies to most of
the Free Software Foundation’s software and to any
other program whose authors commit to using it. (Some
other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You
can apply it to your programs, too.
When we speak of free software, we are referring to
freedom, not price. Our General Public Licenses are
designed to make sure that you have the freedom to
distribute copies of free software (and charge for this
service if you wish), that you receive source code or can
get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know
you can do these things.
To protect your rights, we need to make restrictions that
forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to
certain responsibilities for you if you distribute copies of
the software, or if you modify it.
For example, if you distribute copies of such a program,
whether gratis or for a fee, you must give the recipients
all the rights that you have. You must make sure that
they, too, receive or can get the source code. And you
must show them these terms so they know their rights
We protect your rights with two steps: (1) copyright the
software, and (2) offer you this license which gives you
legal permission to copy, distribute and/or modify the
software.
Also, for each author's protection and ours, we want to
make certain that everyone understands that there is no
warranty for this free software. If the software is
modified by someone else and passed on, we want its
recipients to know that what they have is not the
original, so that any problems introduced by others will
not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by
software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain
patent licenses, in effect making the program
proprietary. To prevent this, we have made it clear that
any patent must be licensed for everyone's free use or
not licensed at all.
The precise terms and conditions for copying,
distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING,
DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work
which contains a notice placed by the copyright holder
82
saying it may be distributed under the terms of this
General Public License. The “Program”, below, refers to
any such program or work, and a “work based on the
Program” means either the Program or any derivative
work under copyright law: that is to say, a work
containing the Program or a portion of it, either verbatim
or with modifications and/or translated into another
language. (Hereinafter, translation is included without
limitation in the term “modification”.) Each licensee is
addressed as “you”.
Activities other than copying, distribution and
modification are not covered by this License; they are
outside its scope. The act of running the Program is not
restricted, and the output from the Program is covered
only if its contents constitute a work based on the
Program (independent of having been made by running
the Program). Whether that is true depends on what the
Program does.
1. You may copy and distribute verbatim copies of the
Program's source code as you receive it, in any
medium, provided that you conspicuously and
appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact
all the notices that refer to this License and to the
absence of any warranty; and give any other recipients
of the Program a copy of this License along with the
Program.
You may charge a fee for the physical act of transferring
a copy, and you may at your option offer warranty
protection in exchange for a fee.
2. You may modify your copy or copies of the Program
or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifications or
work under the terms of Section 1 above, provided that
you also meet all of these conditions:
a) You must cause the modified files fo carry prominent
notices stating that you changed the files and the date of
any change.
b) You must cause any work that you distribute or
publish, that in whole or in part contains or is derived
from the Program or any part thereof, to be licensed as
a whole at no charge to all third parties under the terms
of this License.
¢) If the modified program normally reads commands
interactively when run, you must cause i, when started
running for such interactive use in the most ordinary
way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no
warranty (or else, saying that you provide a warranty)
and that users may redistribute the program under these
conditions, and telling the user how to view a copy of
this License. (Exception: if the Program itself is
interactive but does not normally print such an
announcement, your work based on the Program is not
required to print an announcement.)
These requirements apply to the modified work as a
whole. If identifiable sections of that work are not
derived from the Program, and can be reasonably
considered independent and separate works in
themselves, then this License, and its terms, do not
apply to those sections when you distribute them as
separate works. But when you distribute the same
sections as part of a whole which is a work based on the
Program, the distribution of the whole must be on the
terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each
and every part regardiess of who wrote it.
Thus, it is not the intent of this section to claim rights or
contest your rights to work written entirely by you;
rather, the intent is {o exercise the right to control the
distribution of derivative or collective works based on
the Program.
In addition, mere aggregation of another work not based
on the Program with the Program (or with a work based
on the Program) on a volume of a storage or distribution
medium does not bring the other work under the scope
of this License.
3. You may copy and distribute the Program (or a work
based on it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2
above provided that you also do one of the following:
a) Accompany it with the complete corresponding
machine-readable source code, which must be
distributed under the terms of Sections 1 and 2 above
on a medium customarily used for software interchange;
or,
b) Accompany it with a written offer, valid for at least
three years, to give any third party, for a charge no more
than your cost of physically performing source
distribution, a complete machine-readable copy of the
corresponding source code, to be distributed under the
terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to
the offer to distribute corresponding source code. (This
alternative is aliowed only for noncommercial
distribution and only if you received the program in
object code or executable form with such an offer, in
accord with Subsection b above.)
The source code for a work means the preferred form of
the work for making modifications to it. For an
executable work, complete source code means all the
source code for all modules it contains, plus any
associated interface definition files, plus the scripts used
to control compilation and installation of the executable.
However, as a special exception, the source code
distributed need not include anything that is normally
distributed (in either source or binary form) with the
major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless
that component itself accompanies the executable.
If distribution of executable or object code is made by
offering access to copy from a designated place, then
offering equivalent access to copy the source code from
the same place counts as distribution of the source
code, even though third parties are not compelled to
copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute
the Program except as expressly provided under this
License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will
automatically terminate your rights under this License.
However, parties who have received copies, or rights,
from you under this License will not have their licenses
terminated so long as such parties remain in full
compliance.
5. You are not required to accept this License, since you
have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its
derivative works. These actions are prohibited by law if
you do not accept this License. Therefore, by modifying
or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License
to do so, and all its terms and conditions for copying,
distributing or modifying the Program or works based on
it.
6. Each time you redistribute the Program (or any work
based on the Program), the recipient automatically
receives a license from the original licensor to copy,
distribute or modify the Program subject to these terms
and conditions. You may not impose any further
restrictions on the recipients’ exercise of the rights
granted herein. You are not responsible for enforcing
compliance by third parties to this License.
7. If, as a consequence of a court judgment or
allegation of patent infringement or for any other reason
(not limited to patent issues), conditions are imposed on
you (whether by court order, agreement or otherwise)
that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you
cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent
obligations, then as a consequence you may not
distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the
Program by all those who receive copies directly or
indirectly through you, then the only way you could
satisfy both it and this License would be to refrain
entirely from distribution of the Program.
If any portion of this section is held invalid or
unenforceable under any particular circumstance, the
balance of the section is intended to apply and the
section as a whole is intended to appiy in other
circumstances.
It is not the purpose of this section to induce you to
infringe any patents or other property right claims or to
contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free
software distribution system, which is implemented by
public license practices. Many people have made
generous contributions to the wide range of software
distributed through that system in reliance on consistent
application of that system; it is up to the author/donor to
decide if he or she is willing to distribute software
through any other system and a licensee cannot impose
that choice.
This section is intended to make thoroughly clear what
is believed to be a consequence of the rest of this
License.
8. If the distribution and/or use of the Program is
restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder who
places the Program under this License may add an
explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in
or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the
body of this License.
9. The Free Software Foundation may publish revised
and/or new versions of the General Public License from
time to time. Such new versions will be similar in spirit to
the present version, but may differ in detail to address
new problems or concerns.
Each version is given a distinguishing version number. If
the Program specifies a version number of this License
which applies to it and “any later version”, you have the
option of following the terms and conditions either of that
version or of any later version published by the Free
Software Foundation. If the Program does not specify a
version number of this License, you may choose any
version ever published by the Free Software Foundation.
83
10. If you wish to incorporate parts of the Program into
other free programs whose distribution conditions are
different, write to the author to ask for permission. For
software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation: we
sometimes make exceptions for this. Our decision wil
be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting
the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE
OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE PROGRAM
‘AS 1S" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY
APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE
TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES
OR A FAILURE OF THE PROGRAM TO OPERATE
WITH ANY OTHER PROGRAMS), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New
Programs
If you develop a new program, and you want it to be of
the greatest possible use to the public, the best way to
achieve this is to make it free software which everyone
can redistribute and change under these terms.
To do so, attach the following notices to the program. It
is safest to attach them to the start of each source file to
most effectively convey the exclusion of warranty, and
each file should have at least the “copyright” line and a
pointer to where the full notice is found.
One line to give the program’s name and a brief idea of
what it does.
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it
and/or modify it under the terms of the GNU General
Public License as published by the Free Software
Foundation; either version 2 of the License, or {at your
option) any later version.
This program is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even
84
the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General
Public License along with this program; if not, write to
the Free Software Foundation, Inc., 58 Temple Place,
Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by
electronic and paper mail.
If the program is interactive, make it output a short
notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of
author Gnomovision comes with ABSOLUTELY NO
WARRANTY; for details type 'show w'. This is free
software, and you are welcome to redistribute it under
certain conditions; type 'show c' for details.
The hypothetical commands 'show w and 'show c’
should show the appropriate parts of the General Public
License. Of course, the commands you use may be
called something other than ‘show w’ and ‘show c'; they
could even be mouse-clicks or menu items--whatever
suits your program.
You should also get your employer (if you work as a
programmer) or your school, if any, to sign a “copyright
disclaimer” for the program, if necessary. Here is a
sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in
the program ‘Gnomovision’ (which makes passes at
compilers) written by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit
incorporating your program into proprietary programs. If
your program is a subroutine library, you may consider it
more useful to permit linking proprietary applications
with the library. If this is what you want to do, use the
GNU Library General Pubiic License instead of this
License.
The Libpng License Notices
This copy of the libpng notices is provided for your
convenience. In case of any discrepancy between this
copy and the notices in the file png.h that is included in
the libpng distribution, the latter shall prevail.
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional notices
immediately following this sentence.
This code is released under the libpng license,
libpng versions 1.2.6, August 15, 2004, through 1.2.41,
December 3, 2009, are Copyright (c) 2004, 2006-2009
Glenn Randers-Pehrson, and are distributed according
to the same disclaimer and license as libpng-1.2.5 with
the following individual added to the list of Contributing
Authors:
Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 1.2.5 -
October 3, 2002, are Copyright (c) 2000-2002 Glenn
Randers-Pehrson, and are distributed according to the
same disclaimer and license as libpng-1.0.6 with the
following individuals added to the list of Contributing
Authors:
Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant
and with the following additions to the disclaimer:
There is no warranty against interference with your
enjoyment of the library or against infringement.
There is no warranty that our efforts or the library will
fulfill any of your particular purposes or needs. This
library is provided with all faults, and the entire risk of
satisfactory quality, performance, accuracy, and effort
is with the user.
libpng versions 0.97, January 1998, through 1.0.6,
March 20, 2000, are Copyright (c) 1998, 1999 Glenn
Randers-Pehrson, and are distributed according to the
same disclaimer and license as libpng-0.96, with the
following individuals added to the list of Contributing
Authors:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
libpng versions 0.89, June 1896, through 0.96, May
1997, are Copyright (c) 1996, 1997 Andreas Dilger, and
are distributed according to the same disclaimer and
license as libpng-0.88, with the following individuals
added to the list of Contributing Authors:
John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner
libpng versions 0.5, May 1995, through 0.88, January
1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat,
Group 42, inc
For the purposes of this copyright and license,
“Contributing Authors” is defined as the following set of
individuals:
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Pau! Schmidt
Tim Wegner
The PNG Reference Library is supplied “AS IS”. The
Contributing Authors and Group 42, Inc. disclaim all
warranties, expressed or implied, including, without
limitation, the warranties of merchantability and of
fitness for any purpose. The Contributing Authors and
Group 42, Inc. assume no liability for direct, indirect,
incidental, special, exemplary, or consequential
damages, which may result from the use of the PNG
Reference Library, even if advised of the possibility of
such damage.
Permission is hereby granted to use, copy, modify, and
distribute this source code, or portions hereof, for any
purpose, without fee, subject to the following
restrictions:
1. The origin of this source code must not be
misrepresented.
2. Altered versions must be plainly marked as such and
must not be misrepresented as being the original
source.
3. This Copyright notice may not be removed or altered
from any source or altered source distribution.
The Contributing Authors and Group 42, Inc. specifically
permit, without fee, and encourage the use of this
source code as a component to supporting the PNG file
format in commercial products. If you use this source
code in a product, acknowledgment is not required but
would be appreciated.
A “png_get copyright” function is available, for
convenient use in “about” boxes and the like:
printf(%s” png_get copyright(NULL));
Also, the PNG logo (in PNG format, of course) is
supplied in the files “pngbar.png” and “pngbar.ipg”
(86x31) and “pngnow.png” (98x31).
Libpng is OSI Certified Open Source Software. OS]
Certified Open Source is a certification mark of the
Open Source Initiative.
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
December 3, 2009
85
The zlib License
zlib.h -- interface of the “zlib” general
purpose compression library
Version 1.2.3, July 18th, 2005
Copyright (C) 1995-2005 Jean-loup Gailly and Mark
Adler
This software is provided “as-is”, without any express or
implied warranty. In no event will the authors be held
liable for any damages arising from the use of this
software.
Permission is granted to anyone to use this software for
any purpose, including commercial applications, and to
alter it and redistribute it freely, subject to the following
restrictions:
1. The origin of this software must not be
misrepresented; you must not claim that you wrote
the original software. If you use this software in a
product, an acknowledgment in the product
documentation would be appreciated but is not
required.
2. Altered source versions must be plainly marked as
such, and must not be misrepresented as being the
original software.
3. This notice may not be removed or altered from any
source distribution.
Jean-loup Gailly [email protected]
Mark Adler [email protected]
86
TOSHIBA AMERICA CONSUMER
PRODUCTS, L.L.C.
Corporate Headquarters: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A.
NATIONAL SERVICE DIVISION:1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A.
CableClear, ColorStream, GameTimer, and TheaterWide are registered trademarks
of Toshiba America Consumer Products, L.L.C.
DynaLight is trademark of Toshiba America Consumer Products, L.L.C.
REGZA-LINK 1s a registered trademark of Toshiba Corporation.
PRINTED IN CHINA

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement