Traceable 8141 Other Tool Owner's Manual

Add to My manuals
2 Pages


Traceable 8141 Other Tool Owner's Manual | Manualzz

   

Lay the cable along the center of the suppressor with the connector to your left.

Loop the right end of the cable under the suppressor and back up again laying the cable along the center of the suppressor.

Carefully, snap the two halves together with the looped cable routed through the center.

This completes the installation of the suppressor.

Static generated, radio frequency can affect any cable through the air or by physical contact. To protect against radio frequency, install a suppressor onto your thermometers cable to absorb radio frequency as follows: controL comPany

4455 Rex Road

Friendswood, Texas 77546 USA

Ph. 281 482-1714 • Fax 281 482-9448

E-mail [email protected] •

Control Company is ISO 9001 Quality-Certified by

DNV and ISO 17025 accredited as a Calibration

Laboratory by A2LA.

©2008 Control Company. 92-8141-00 Rev. 1 120508

Static diScharge radio



For your thermometer


Related manuals