Mastercool 85525-YF R1234yf PIERCING DESIGN RECHARGE KIT Instructions
Advertisement
Advertisement
R1234yf PIERCING DESIGN RECHARGE KIT
FEATURES
• Charge A/C systems using R1234yf pierce designed cans
SAFETY WARNING AND PRECAUTIONS
3
WARNING: Before removing valve from can for disposal, make sure all refrigerant has been used
WARNING: Make sure hose has been purged or vacuumed before use
WARNING: Wear safety glasses
The 1990 amendments to the United States Clean Air Act mandate that all personnel who service refrigerant systems must be trained and certified. Fines are in place for violations and compliance is now being monitored by the U.S. EPA.
2
OPERATING INSTRUCTIONS
1. Connect can tap fitting to hose and coupler assembly.
2. Connect refrigerant can to the bottom of can tap, turn counterclockwise .
3. Turn handle clockwise to pierce the refrigerant can.
4. Turn counterclockwise to flow refrigerant.
5. First time use, purge air in hose.
6. Connect coupler to low side of system, refrigerant will flow into the system.
7. When can is empty properly discard can.
PARTS LIST
2
3
ITEM# PART#
1 85510-YF
67534
83181
DESCRIPTION
R1234yf 1/2” ACME-LH thread piercing design can tap valve
R1234yf low side quick coupler 12 mm-F x 14 mm
R1234yf 18” blue hose
1
For parts or service contact the service department: 1-888-825-6989
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
85525-YF-INST

Public link updated
The public link to your chat has been updated.
Advertisement