Baumer Torque arm M12, length 145...170 mm Datasheet

Baumer Torque arm M12, length 145...170 mm Datasheet
Mounting hollow shaft encoders
Torque arm M12, length 145...170 mm
Article number: 11054922
Overview
■
■
■
■
■
Torque arm for hollow shaft encoder
Swivel joints size M12 according to DIN ISO 12240-4, size series K
Compensate for mounting tolerances of the drive shaft in an axial direction
Standard version
Length 145...170 mm
The hollow shaft of rotational speed measuring devices in the A4 design
(such as hollow-shaft encoders) is pushed directly onto the drive shaft
and frictionally locked to it. The reactive torque of the housing (breakaway torque of the ball bearings, friction of bearings and seals, mass
inertia) is then taken up by a torque arm. The swivel joints of torque arms
in size 12 are conform to DIN ISO 12240-4, size series K, and are implemented as ball joints. This makes it possible for them to compensate
the mounting tolerances of the drive shaft in an axial direction (e. g. as a
result of thermal expansion of the shaft) and radial direction (e. g. as a
result of runouts). Torque arms are available for a wide variety of applications, in standard and insulated versions. Definite length on request.
Dimensions
±9°
12
145...170
ø12
16
2020-01-23
19
The product features and technical data specified do not express or imply any warranty. Technical modifications subject to change.
Description
www.baumer.com
Data sheet – Torque arm M12, length 145...170 mm
Page 1 of 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement