Advertisement
Advertisement
MONTEREY
WOODEN SWING SET
MODEL: # 6012
BOOKLET INCLUDES:
• Owner's Manual
• Frequently Asked Questions
• Assembly Instructions
• Warranty Information
For the most up to date assembly manual, to register your set or to order replacement parts please visit
www.backyarddiscovery.com
Save this assembly manual for future reference in the event that you need to order replacement parts.
Made in China
INS-6012-B-MONTEREY PLAYSET-ENG 1-29-18
With Go Configure, we bring you 18 years of experience right to your doorstep.
We service a wide array of indoor and outdoor recreation products that most consumers don’t have the time or ability to deliver & install themselves.
We do the heavy lifting, so you don’t have to!
• 18+ Years of Experience Servicing Big Box Retailers and Direct Consumers
• Highly Skilled, Specialized, Courteous, Professional Service Technicians
• Over 140,000 Installations Annually
• White Glove Service
• Satisfaction Guarantee
• Flexible Appointments, including weekends
• Coverage across the nation
Visit www.goconfigure.com for more info!
*Installation services are only available to U.S. customers.
STOP
PARE
Missing A Part?
CALL US BEFORE GOING
BACK TO THE STORE!
The store where you made your purchase does not stock parts for this item.
If you have assembly questions or if you need parts, whether they are missing or damaged
Call Toll-Free Help Line or visit www.
EDFN\DUGGLVFRYHU\
.com
͋>>DEK^Ed^Z'Z^Z>d/E͊
>ĂƚŝĞŶĚĂĚŽŶĚĞƌĞĂůŝnjſůĂĐŽŵƉƌĂŶŽĂůŵĂĐĞŶĂƉŝĞnjĂƐĚĞĞƐƚĞƉƌŽĚƵĐƚŽ͘
^ŝƚŝĞŶĞƉƌĞŐƵŶƚĂƐƐŽďƌĞĞůĞŶƐĂŵďůĂũĞŽƐŝŶĞĐĞƐŝƚĂƉŝĞnjĂƐĚĞďŝĚŽĂƋƵĞ
ĨĂůƚĂŶŽĞƐƚĄŶĚĂŹĂĚĂƐ ůůĂŵĞŐƌĂƚŝƐĂůĂůşŶĞĂĚĞĂLJƵĚĂ
1-800-856-4445
PLEASE READ THIS BEFORE STARTING ASSEMBLY
WKZ&sKZ>^d^/E^dZh/KE^Ed^KDEZ>E^D>:
•
Zd,^^D>zDEh>KDW>d>z͕Wz/E'^W/>ddEd/KEdKd,/DWKZdEdd/W^E
^&dz/E&KZDd/KE͘
•
&dZzKh,sZd,^^D>zDEh>͕zKht/>>>dK//&zKhEWZK&^^/KE>
,>WdKKDW>dd,^^D>zK&d,^dZhdhZ͘
•
^WZdE/Ed/&z>>WZd^dKD<^hZd,dzKh,s>>K&d,WZd^>/^d͘
•
/&zKhE͛d&/E>>K&d,WZd^͕,<d,W</E'DdZ/>͘^D>>WZd^Dz,s&>>E/EdK/d hZ/E'^,/WDEd͘
•
/&zKh,sWZK>D^t/d,d,^^D>zKZ/&EzWZd/^D/^^/E'KZ
,>W>/E ϭͲϴϬϬͲϴϱϲͲϰϰϰϱKZs/^/d
ZZZEDFN\DUGGLVFRYHU\FRP
D'͕W>^>>d,
•
>>DEh>E^D>:KDW>dDEd͕WZ^dEK^W/>dE/ME>K^KE^:K^jd/>^
/DWKZdEd^z>/E&KZD/ME^KZ^'hZ/͘
•
^Wh^Yh,z>1K>DEh>E^D>:͕WKZ//Z^/E^/dzhWZK&^/KE>
WZ&dhZ>E^D>:>^dZhdhZ͘
•
^WZ/Ed/&/YhdK^>^W/^WZKDWZKZYh/^WKEdK^>^WZd^/E/^͘
•
^/EKWhEKEdZZdK^>^W/^͕Zs/^>DdZ/>DWYh͘^WK^/>Yh>'hE^
W/^WYhH^WhE,Z^1K>>1hZEd>Es1K͘
•
DEdE'^>:K>K^E/HK^DEKZ^>ZKDE
•
^/d/EWZK>D^KE>E^D>:K^/>'hEW/&>dK^dH͕>>D>>1E zh> ϭͲϴϬϬͲϴϱϲͲϰϰϰϱKs/^/d
ZZZEDFN\DUGGLVFRYHU\FRP
PLEASE HAVE THE FOLLOWING INFORMATION WHEN YOU MAKE YOUR CALL:
1 – MODEL NUMBER OF THE PRODUCT LOCATED ON THE FRONT OF THE ASSEMBLY MANUAL
2 – DESRIPTION OF THE PART FROM THE PARTS LIST
POR FAVOR TENGA VISIBLE LA SIGUIENTE INFORMACIÓN CUANDO LLAME:
1 - NÚMERO DE MODELO DEL PRODUCTO QUE SE ENCUENTRA UBICADO AL FRENTE DEL MANUAL
DE ENSAMBLAJE
2 - DESCRIPCIÓN DE LA PIEZA QUE SE ENCUENTRA EN LA LISTA DE PIEZAS
Owner’s Manual Play Set
Dear Customer:
Please read entire booklet completely before beginning the assembly process.
Equipment is recommended for use by
children 3 to 10 years of age
. Structures are
not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School
,
Recreational Park, or any similar Commercial
Application.
WARNING
: This Symbol points out important safety instructions which, if not followed, could endanger the personal safety of yourself and your children and/or damage your property. You
MUST read and follow all instructions in this manual before attempting to use this playcenter.
WARNING
:
Children must NOT use this playcenter until unit has been completely assembled and inspected by an adult to insure set has been properly installed and anchored.
Please follow all recommendations below.
Failure to do so may result in the warranty being void and/or safety violations that could result in serious injury
. This manual contains helpful information concerning
Assembly Preparation, Installation Procedure, and Required Maintenance. Always keep the safety of your children in mind as your play structure is being built and as your children play on the set. Before your children play on the set please review the Operation Instructions with them to help ensure their safety.
PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THEM IN A SAFE PLACE
WHERE YOU CAN REFER TO THEM AS NEEDED. IN ORDER TO PROVIDE YOU WITH THE MOST
EFFICIENT SERVICE, IT IS REQUIRED THAT YOU PROVIDE US WITH THE PART NUMBERS WHEN
ORDERING PARTS.
For Your Records:
Please take time and fill out the information below. This information will be needed for warranty issues.
Where Purchased: ____________________
Staple Receipt Here
Date of Purchase: ____________________
Installation Date: _____________________
Installed by: _________________________
Tracking Number: ____________________
OR
Tracking Number
Vertical ID Plate
Tracking Number Reference Label
Tracking ID number on the carton and back of the ID plate or vertical ID plate are included for tracking purposes associated with warranty claims.
5HY
Owner’s Manual Play Set
Rev01/12/18
Owner’s Manual Play Set
Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height
Positioning Your Playcenter
1. The Playcenter is designed to be installed on a level surface
by an Adult with an Adult helper
. Place in a flat area of your yard to minimize ground preparation.
2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains.
3. Place the equipment not less than
6 ft (1.8 m)
from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
4. Provide enough room so that the children can use the equipment safely. For example, for structures with multiple play activities, a slide should not exit in front of a swing.
5. It is a good idea to place your Playcenter in an area that is convenient for adults to watch children at play.
6. Create a site free of obstacles that could cause injuries – such as low overhanging tree branches, overhead wires, tree stumps and/or roots, large rocks, bricks and concrete. Additional suggestions in the Suggested Playground Surfacing Section.
7. Do not build your playset on top of surfacing material.
8. Locate bare metal platforms and slides out of direct sunlight to reduce the likelihood of serious burns.
A slide that faces north will receive the least direct sunlight.
9. Separate active and quiet activities from each other. For example, locate sandboxes away from swings or use a guardrail or barrier to separate the sandbox from the movement of the swings.
Suggested Playground Surfacing
Do not install home playground equipment over concrete, asphalt, packed earth, grass, carpet, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user.
Do not install loose fill surfacing over hard surfaces such as concrete or asphalt.
Shredded bark mulch, wood chips, fine sand and fine gravel, are added as shock absorbing materials after assembly. If used properly these materials can absorb some of the impact of a child’s fall.
All surface material should extend a minimum of 6 feet in all directions around the play area.
Do not apply playground surfacing until after the unit is completely constructed. Playset should not be built on top of surfacing.
Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging.
Installations of rubber tiles or poured-in-place surfaces (other than loose-fill materials) generally require a professional and are not “do-it-yourself” projects.
Shall use Playground Surfacing Materials (other than loose-fill material) which comply with the safety standard ASTM F1292 Standard Specification of Impact Attenuation of Surfacing Materials within the
Use Zone of Playground Equipment.
5HY
Owner’s Manual Play Set
The following chart explains the fall height in feet from which a life threatening head injury would not be expected
Critical Heights in feet (m) of Tested Materials
Material Uncompressed Depth Compressed Depth
Wood Chips
Double-Shredded bark mulch
Engineered Wood Fibers
Fine Sand
Coarse Sand
Fine Gravel
Medium Gravel
Shredded Tires*
6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm)
7' (2.13m)
6' (1.83m)
6' (1.83m)
5' (1.52m)
5' (1.52m)
5' (1.52m)
5' (1.52m)
10-12' (3.0-3.6m)
10' (3.05m)
10' (3.05m)
7' (2.13m)
5' (1.52m)
5' (1.52m)
7' (2.13m)
5' (1.52m)
N/A
11' (3.35m)
11' (3.35m)
>12' (3.66m)
9' (2.74m)
6' (1.83m)
10' (3.05m)
6' (1.83m)
N/A
10' (3.05m)
7' (2.13m)
6' (1.83m)
5' (1.52m)
4' (1.22m)
6' (1.83m)
5' (1.52m)
N/A
7KLVGDWDLVIURPWHVWVFRQGXFWHGE\LQGHSHQGHQWWHVWLQJODERUDWRULHVRQDLQFKGHSWKRIXQFRPSUHVVHGVKUHGGHGWLUHVDPSOHVSURGXFHGE\IRXUPDQXIDFWXUHUV7KHWHVWV
UHSRUWHGFULWLFDOKHLJKWVZKLFKYDULHGIURPIHHWWRJUHDWHUWKDQIHHW,WLVUHFRPPHQGHGWKDWSHUVRQVVHHNLQJWRLQVWDOOVKUHGGHGWLUHVDVDSURWHFWLYHVXUIDFHUHTXHVWWHVW
GDWDIURPWKHVXSSOLHUVKRZLQJWKHFULWLFDOKHLJKWRIWKHPDWHULDOZKHQLWZDVWHVWHGLQDFFRUGDQFHZLWK$670)
Operating Instructions:
NOTE
: Your children’s safety is our #1 concern. Observing the following statements and warnings reduces the likelihood of serious or fatal injury. Please review these safety rules regularly with your children.
1. This Playcenter is designed for specific number of occupants whose combined weight
should not exceed
a designated weight on the elevated floor or the swing area, the total Unit capacity is outlined in the Basic Setup Dimensions section of instruction manual. The maximum fall height and recommended play area is also available in the Basic Setup Dimensions section of the manual for the specific unit.
2. On-site adult supervision is
required
.
3. Instruct children
not
to walk close to, in front of, behind, or between moving swings or other moving playground equipment.
4. Instruct children to sit in and
never
stand on swings
5. Instruct children
not
to twist the chains and ropes and not to loop them over the top support bar, since this may reduce the strength of the chain or rope.
6. Instruct children
not
to jump from swings or other playground equipment in motion.
7. Instruct children to
not to push
empty seats. The seat may hit them and cause serious injury.
8. Instruct and teach children to sit in the center of the swings with their full weight on the seats.
9. Instruct children
not
to use the equipment in a manner other than intended.
10. Instruct children to
always
go down slides feet first. Never slide head first.
11. Instruct children to
look
before they slide to make sure no one is at the bottom.
12. Instruct children to
never
run up a slide, as this increases their chances of falling.
13. The parents should
dress children appropriately
. (Examples would include the use of wellfitting shoes and the avoidance of ponchos, scarfs, and other loose-fitting clothing that is potentially hazardous while using equipment).
14. Instruct children
not
to climb when the equipment is wet.
15. Instruct children to
never
jump from a fort deck. They should always use the ladder, ramp or slide.
16. Instruct children to
never
crawl or walk across the top of monkey bars.
17. Instruct children to
never
crawl on top of a fort roof.
5HY
Owner’s Manual Play Set
18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it.
19. Instruct children
not
to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard.
20. Instruct children to
never
wrap their legs around swing chain.
21. Instruct children to
never
slide down the swing chain.
22. Instruct children to remove their bike or other sports helmet before playing on playground equipment.
Maintenance Instructions:
At the beginning of each play season:
• Tighten all hardware.
• Lubricate all metallic moving parts per manufacturer’s instructions.
• Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing.
• Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed.
• Check metal parts for rust. If found, sand and repaint using a non Lead-based paint meeting the requirements of 16 CFR 1303 .
• Check all wood members for deterioration and splinters. Sand down splinters and replace deteriorating wood members.
• Reinstall any plastic parts, such as swing seats or any other items that were removed for the cold season.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary.
Twice a month during play season:
•
Tighten all hardware.
• Check all protective coverings on bolts, pipes, edges, & corners. Replace if they are loose, cracked, or missing.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary.
• Once a month during play season.
• Lubricate all metallic moving parts per manufacturer’s instructions.
• Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed.
At the end of each play season or when the temperature drops below 32° F:
•
Remove plastic swing seats and other items as specified by the manufacturer and take indoors or do not use.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary.
Owners shall be responsible for maintaining the legibility of the warning labels.
5HY
Owner’s Manual Play Set
Additional Maintenance:
•
Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season.
•
Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment. Treat your playset with stain regularly, to help prevent severe checking/splitting and other weather damage.
• A waterbourne transparent stain has been applied to your playset. This is done for color only.
Once or twice a year, depending on your climate conditions, you must apply some type of protection (sealant) to the wood of your unit. Prior to the application of sealant, lightly sand any
“rough” spots on your playset.
Please note this is a requirement of your warranty.
• Assembling and maintaining the playset on a level location is very important. As your children play, your playset will slowly dig its way into the soil, and it is very important that it settles evenly. Make sure the playset is level and true one each year or at the beginning of each play season.
Disposal Instructions:
When the Playcenter use is no longer desired, it should be disassembled and disposed of in such a way that no unreasonable hazards will exist at the time the unit is discarded.
Third Party Assembly:
Customer may, in their sole discretion, elect to use a third party person or service to assemble this product. Backyard Discovery assumes no responsibility or liability for any charge incurred by the
Customer for any assembly services’.
Please see our warranty for more information about damaged and missing part replacement coverage. Backyard Discovery will not reimburse Customer for the price of parts purchased.
5HY
Owner’s Manual Play Set
APPENDIX A
Information on Playground Surfacing Materials:
The following information is from the
United States Consumer Product Safety Commission’s Information
Sheet for playground surfacing material;
also see the following website for additional information:
www.cpsc.gov/cpscpub/pubs/323.html
.
X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY
HANDBOOK
9
X3.1 Select Protective Surfacing—One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM Specification F 1292 . There are different types of surfacing to choose from; whichever product you select, follow these guidelines:
X3.1.1 Loose-Fill Materials:
X3.1.1.1 Maintain a minimum depth of 9 inches of loose-fill materials such as wood mulch/chips, engineered wood fiber
(EWF), or shredded/recycled rubber mulch for equipment up to 8 feet high; and 9 inches of sand or pea gravel for equipment up to 5 feet high. NOTE: An initial fill level of 12 inches will compress to about a 9-inch depth of surfacing overtime. The surfacing will also compact, displace, and settle, and should be periodically refilled to maintain at least a 9-inch depth.
X3.1.2 Use a minimum of 6 inches of protective surfacing for play equipment less than 4 feet in height. If maintained properly, this should be adequate. (At depths less than 6 inches, the protective material is too easily displaced or compacted.) NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and environmental factors can reduce their shock absorbing effectiveness. Carpeting and thin mats are generally not adequate protective surfacing. Ground level equipment such as a sandbox, activity wall, playhouse or other equipment that has no elevated play surface – does not need any protective surfacing.
X3.1.3 Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Don’t forget to account for water drainage.
X3.1.3.1 Check and maintain the depth of the loose-fill surfacing material. To maintain the right amount of loose-fill materials, mark the correct level on play equipment support posts. That way you can easily see when to replenish and/or redistribute the surfacing.
X3.1.3.2
Do not
install loose-fill surfacing over hard surfaces such as concrete or asphalt.
X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles — You may be interested in using surfacing other than loose-fill materials – like rubber tiles or poured-in-place surfaces.
X3.1.4.1 Installations of these surfaces generally require a professional and are not “do-it-yourself” projects.
X3.1.4.2 Review surface specification before purchasing this type of surfacing. Ask the installer/manufacturer for a report showing that the product has been tested to the following safety standard: ASTM F 1292 Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment. This report should show the specific height for which the surface is intended to protect against serious head injury. This height should be equal to or greater than the fall height – vertical distance between a designated play surface (elevated surface for standing, sitting, or climbing) and the protective surfacing below – of your play equipment.
X3.1.4.3 Check the protective surfacing frequently for wear.
X3.1.5 Placement — Proper placement and maintenance of protective surfacing is essential. Be sure to:
X3.1.5.1 Extend surfacing at least 6 feet from the equipment in all directions.
X3.1.5.2 For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to twice the height of the top bar from which the swing is suspended.
9
This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and
“Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to the: Office of Public Affairs,
U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1-800-638-2772.
The American Society for Testing and Materials takes no position respecting the validity of any parent right asserted in connection with any item mentioned in this standard. Users of this standard are expressly advised that determination of the validity of any such parent rights, and the risk of infringement of such rights, are entirely their own responsibility.
The standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and if not revised, either approved or withdrawn. Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM Headquarters. Your comments will receive careful consideration at a meeting of the responsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you should make your views known to the ASTM Committee on Standards. 100 Barr Harbor Drive, West Conshohocken, PA 19428.
5HY
Play Set Assembly Manual FAQs:
1.
Does the area for the playset need to be level?
Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground.
2.
What size area is recommended for the playset?
Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety.
3.
What age range is appropriate for the playsets?
Backyard Discovery playsets are recommended for children ages 3 – 10 years.
4.
Is the wood treated with chemicals?
Backyard Discovery uses 100% Chinese Cedar wood which is naturally bug resistant, decay and rot resistant. To help ensure your child’s safety, our wood is completely chemical free and we do not use pressure-treated wood. The stain we use is a top coat using a waterbased product that is for appearance only.
5.
How often should the playset be stained?
Backyard Discovery recommends the playset be stained once each year. A water or oil based stain can be used at the customer’s discretion.
6.
Why does it seem that my swing set is developing cracks?
Wood is a natural material; no two pieces are exactly alike. Each piece has its own characteristics and personality and reacts differently to climate changes. When any wood product is exposed to the elements, it develops “wood checks”. A check is the radial separation of the wood fibers running with the grain of the wood. These are caused by the varying temperature and moisture conditions. A check is not a crack – it does not affect the strength or durability of the wood or structural integrity of the play set.
7.
Do Backyard Discovery playsets come with a warranty?
Yes. All Backyard Discovery products carry a 1-year replacement warranty on all parts for manufacturer’s defect. Our wood carries a 5 year warranty on rot and decay as well. Please see warranty details for more information.
8.
What is the best way to get started assembling the playset?
Backyard Discovery recommends taking all the parts out of the boxes and arranging them by part number before you begin any assembly. This will not only allow faster assembly, but will also identify any parts that may be missing or damaged so they can be replaced before assembly. If parts are missing or need replacement, go to www.
EDFN\DUGGLVFRYHU\ .com/support and follow the prompts to order them. Next, read the assembly manual and get the tools ready for the job as recommended in the manual. If the assembly manual is lost or misplaced a new one can be printed from Backyard Discovery’s website: www.
EDFN\DUGGLVFRYHU\ .com.
9.
The playset seems to rock or sway too much. What’s wrong?
Rocking is caused by uneven ground or obstructions such as rocks, roots, etc. under the ground rails. These should be removed and the ground underneath re-leveled to prevent rocking. Also ensure the playset is securely staked to the ground using the stakes provided.
10.
The 2”x4” boards do not measure 2”x 4”. Why not?
In the U.S. it is common practice to describe lumber dimensions using the rough cut sizes from the sawmill and not the finished dimensions. Retailers, home stores, etc. all use this accepted practice for describing lumber dimensions. However, Backyard Discovery playsets are designed and constructed using the actual dimensions so everything fits properly and remains so during the life of the playset.
11.
The end beam is not straight up and down. Why not?
This is normal. Backyard Discovery designs playsets this way to ensure the strongest structure possible. The slight angle adds strength and reduces rocking and twisting.
12.
The S-hooks for the swings won’t close. What is wrong?
Backyard Discovery recommends placing them on a hard surface such as concrete (don’t do this on anything that will dent such as metal or finished wood or glass which will break!). It will take quite a few strokes, but the hooks will close.
For more information and frequently asked questions, please refer to our website at www.
EDFN\DUGGLVFRYHU\ .com.
7RROV5HTXLUHGIRU,QVWDOODWLRQ
7KHVHDUHWKHWRROVWKDWDUHJHQHUDOO\UHTXLUHGIRUDVVHPEO\RIRXURXWGRRUSURGXFWV7KHVHWRROV
DUHQRWLQFOXGHGZLWKWKHRXWGRRUSURGXFWSXUFKDVH
/HYHO
6TXDUH
2SHQ(QG:UHQFKHV
/DGGHU
7DSH0HDVXUH
5XEEHU0DOOHW2SWLRQDO
3KLOOLSV 6WUDLJKW
%ODGH6FUHZ'ULYHUV
&ODZ+DPPHU
'ULOO$WWDFKPHQWV3KLOOLSV
+HDG 6RFNHW'ULYHU
&RUGOHVV'ULOORU(OHFWULF'ULOO
'ULYH5DWFKHW67'
6RFNHWV'HHS6RFNHWV
$Q$GXOWZDQ$GXOW+HOSHU
'ULOO%LWV
Basic Setup Dimensions
Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
28'-5 3/8"
[8.7 m]
16'-5 3/8"
[5 m]
25'-8"
[7.8 m]
13'-7 7/8"
[4.2 m]
6'-0"
[1.8 m]
Safe Play Zone
6'-0"
[1.8 m]
General Information:
<RXUVHWKDVEHHQGHVLJQHGDQGHQJLQHHUHGIRU
FKLOGUHQRQO\DQGIRUUHVLGHQWLDOXVHRQO\
$PD[LPXPRIOEVSHUFKLOGLVUHFRPPHQGHGIRU
SOD\DFWLYLWLHVGHVLJQHGIRULQGLYLGXDOXVH
$PD[LPXPRIOEVSHUFKLOGLVUHFRPPHQGHGIRU
SOD\DFWLYLWLHVGHVLJQHGIRUPXOWLSOHFKLOGXVH
$PD[LPXPRIFKLOGUHQLVUHFRPPHQGHGIRUWKLV
VZLQJVHW
6'-4"
[1.9 m]
10'-7"
[3.2 m]
Important Assembly Notes
Safe play height: 16'-7" [3.2 m]
Maximum fall height: 6'-4" [1.9 m]
1) While assembling unit, take time before and after each phase to make sure fort is level. If fort is
not level, assembly will be difficult and improper assembly may result. Extra care must be taken to
ensure the fort is square.
2) Tighten bolts securely, tighten nuts on bolts flush to the tube or member.
3) Pay close attention to the ITEMS NEEDED FOR EACH PHASE. They can be a valuable aid when
sorting your wood and hardware. Assembly will be made easier if items are sorted by phase.
4) Pay close attention to make sure you are using the correct hardware in the correct phases. Using
incorrect hardware may result in improper assembly.
5) Whenever a T-nut is used, follow these directions. Place T-nut in pre-drilled hole. Tap in with hammer.
Place bolt with washers in the opposite side. Hand tighten to make sure the bolt is in the T-nut.
DO NOT over tighten.
6) Read the steps of each phase thoroughly. The written steps may include important information not
shown in the illustrations.
Parts Identification
Wood Components
(NOT TO SCALE)
E1 - FORT UPRIGHT - W4L06233
1 3/8"x3 3/8"x89 5/8" (36x86x2275)
E2 - FORT UPRIGHT - W4L06234
1 3/8"x3 3/8"x89 5/8" (36x86x2275)
E72 - LEFT RAIL - W100036
1 3/8"x3 3/8"x61 3/4" (36x86x1570)
E73 - RIGHT RAIL - W100037
1 3/8"x3 3/8"x61 3/4" (36x86x1570)
E77 - ANGLE BRACE - W4L04854
1 3/8"x3 3/8"x74 3/8" (36x86x1890)
F1 - SUNDECK UPRIGHT - W4L06222
1 3/8"x2 3/8"x33 7/8" (36x60x861)
F2 - SUNDECK UPRIGHT - W4L06223
1 3/8"x2 3/8"x33 7/8" (36x60x861)
G3 - SB MOUNTING RAIL - W4L06211
1"x5 1/4"x43 3/4" (24x134x1110)
G7 - CENTER ARCH WALL RAIL - W4L06205
1"x5 1/4"x40 7/8" (24x134x1037)
G12 - OVERHANG BOARD - W102586
1"x5 1/4"x13 3/4" (24x134x350)
G13 - OVERHANG BOARD - W102587
1"x5 1/4"x13 3/4" (24x134x350)
G14 - OVERHANG BOARD - W102588
1"x5 1/4"x3 1/2" (24x134x90)
G15 - OVERHANG BOARD - W102589
1"x5 1/4"x3 1/2" (24x134x90)
H1 - FLOOR SUPPORT - W4L06206
1"x3 3/8"x71 7/8" (24x86x1825)
Parts Identification
Wood Components
(NOT TO SCALE)
H2 - FLOOR SUPPORT - W4L06207
1"x3 3/8"x43 3/4" (24x86x1110)
H3 - FLOOR JOIST - W102448
1"x3 3/8"x43 5/8" (24x86x1108)
H4 - FLOOR SUPPORT - W4L06208
1"x3 3/8"x71 7/8" (24x86x1825)
H5 - TABLE SUPPORT - W4L06201
1"x3 3/8"x6 1/2" (24x86x165)
H6 - BENCH SUPPORT - W102500
1"x3 3/8"x14 1/8" (24x86x360)
H7 - BENCH SUPPORT - W102501
1"x3 3/8"x8 5/8" (24x86x220)
H8 - WALL RAIL - W4L05241
1"x3 3/8"x43 3/4" (24x86x1110)
H14 - DOOR STOP - W102590
1"x3 3/8"x4 7/8" (24x86x125)
H15 - OVERHANG CLEAT - W102627
1"x3 3/8"x5 1/4" (24x86x134)
H16 - DOUBLE ANGLE GUSSET - W4L06204
1"x3 3/8"x15 7/8" (24x86x403)
H76 - LADDER RUNG - W100611
1"x3 3/8"x18 1/8" (24x86x460)
H77 - LEFT UPRIGHT - W100972
1"x3 3/8"x64 3/8" (24x86x1634)
H78 - RIGHT UPRIGHT - W100973
1"x3 3/8"x64 3/8" (24x86x1634)
H79 - END SUPPORT - W4L04855
1"x3 1/2"x42" (24x86x1072)
Parts Identification
Wood Components
(NOT TO SCALE)
K2 - HALF MOON PLATE - W4L06238
5/8"x5 1/4"x13 3/8" (16x134x340)
K3 - GROUND BOARD - W4L06196
5/8"x5 1/4"x63" (16x134x1601)
K4 - GROUND BOARD - W4L06197
5/8"x5 1/4"x43 3/4" (16x134x1110)
K5 - TABLE TOP BOARD - W4L06198
5/8"x5 1/4"x43 3/4" (16x134x1110)
K6 - TABLE TOP BOARD - W4L06199
5/8"x5 1/4"x43 3/4" (16x134x1110)
K7 - CENTER ARCH WALL RAIL - W4L06210
5/8"x5 1/4"x43 3/4" (16x134x1110)
K8 - WALL RAIL - W4L06212
5/8"x5 1/4"x43 3/4" (16x134x1110)
K10 - SIDE ARCH WALL RAIL - W4L06213
5/8"x5 1/4"x71 1/4" (16x134x1809)
K11 - SIDE ARCH WALL RAIL - W4L06214
5/8"x5 1/4"x71 1/4" (16x134x1809)
K12 - WALL RAIL - W4L06221
5/8"x5 1/4"x11 5/8" (16x134x296)
K91 - GABLE BOARD - W4L06235
3/8"x3 3/8"x45 1/2" (11x86x1157)
K92 - GABLE BOARD - W4L06236
3/8"x3 3/8"x39 1/8" (11x86x995)
Parts Identification
Wood Components
(NOT TO SCALE)
K93 - GABLE BOARD - W4L06237
3/8"x3 3/8"x32 3/4" (11x86x833)
M1 - WALL RAIL - W4L06219
5/8"x3 3/8"x42 1/8" (16x86x1069)
M3 - WALL RAIL - W4L06200
5/8"x3 3/8"x10 7/8" (16x86x276)
M4 - WALL RAIL - W102443
5/8"x3 3/8"x43 3/4" (16x86x1110)
M5 - LOWER ENCLOSURE SLAT - W102444
5/8"x3 3/8"x23" (16x86x583)
M6 - FLOOR BOARD - W102445
5/8"x3 3/8"x71 7/8" (16x86x1825)
M7 - WALL RAIL - W4L06215
5/8"x3 3/8"x42 1/8" (16x86x1069)
M8 - WALL SLAT - W102455
5/8"x3 3/8"x55 5/8" (16x86x1414)
M9 - WALL RAIL - W4L06218
5/8"x3 3/8"x40" (16x86x1016)
M10 - ARCH WALL SLAT - W4L06226
5/8"x3 3/8"x42 7/8" (16x86x1090)
M11 - ARCH WALL SLAT - W102459
5/8"x3 3/8"x42 7/8" (16x86x1090)
M12 - ARCH WALL SLAT - W102460
5/8"x3 3/8"x42 7/8" (16x86x1090)
M13 - WALL SLAT - W102461
5/8"x3 3/8"x27" (16x86x685)
Parts Identification
Wood Components
(NOT TO SCALE)
M14 - WALL SLAT - W102499
5/8"x3 3/8"x42 7/8" (16x86x1090)
M15 - BENCH CLEAT - W102503
5/8"x3 3/8"x7 7/8" (16x86x200)
M16 - WALL SLAT - W4L05237
5/8"x3 3/8"x28 1/8" (16x86x715)
M17 - WALL RAIL - W4L06209
5/8"x3 3/8"x7 5/8" (16x86x195)
M19 - WALL RAIL - W4L06228
5/8"x3 3/8"x43 3/4" (16x86x1110)
M20 - ROOF SUPPORT - W4L06229
5/8"x3 3/8"x43 3/4" (16x86x1110)
M21 - WALL RAIL - W4L06203
5/8"x3 3/8"x43 3/4" (16x86x1110)
M22 - LOWER ENCLOSURE SLAT - W4L06202
5/8"x3 3/8"x23" (16x86x583)
M23 - ARCH WALL SLAT - W4L05238
5/8"x3 3/8"x42 7/8" (16x86x1090)
M25 - UPPER SLAT - W102518
5/8"x3 3/8"x15" (16x86x380)
M26 - UPPER ARCHED SLAT - W102519
5/8"x3 3/8"x15" (16x86x380)
M27 - WALL RAIL - W4L06220
5/8"x3 3/8"x11 5/8" (16x86x296)
M28 - DOUBLE ARCH WALL SLAT - W4L06225
5/8"x3 3/8"x42 7/8" (16x86x1090)
Parts Identification
Wood Components
(NOT TO SCALE)
M32 - ROOF SUPPORT - W4L06230
5/8"x3 3/8"x45 1/2" (16x86x1157)
M33 - ROOF TRUSS - W4L06231
5/8"x3 3/8"x34 5/8" (16x86x880)
M34 - WALL SLAT - W4L06232
5/8"x3 3/8"x55 5/8" (16x86x1414)
M70 - SLIDE BED SUPPORT - W100935
5/8"x3 3/8"x19 7/8" (16x86x505)
M73 - REAR SUPPORT - W100610
5/8"x3 3/8"x19 1/4" (16x86x488)
M74 - ROCK WALL BOARD - W100987
5/8"x3 3/8"x26 5/8" (16x86x675)
M75 - ROCK WALL BOARD - W4L05240
5/8"x3 3/8"x26 5/8" (16x86x675)
M76 - ROCK WALL BOARD - W4L05239
5/8"x3 3/8"x26 5/8" (16x86x675)
M102 - ATTACHMENT BOARD - W4L05242
5/8"x3 3/8"x27 7/8" (16x86x707)
M107 - ATTACHMENT BOARD - W103559
5/8"x3 3/8"x19 1/4" (16x86x488)
M108 - TOP BOARD - W103105
5/8"x3 3/8"x27 7/8" (16x86x707)
N1 - FLOOR BOARD - W102446
5/8"x2 3/8"x34" (16x60x864)
N2 - FLOOR BOARD - W4L06224
5/8"x2 3/8"x26 3/4" (16x60x679)
N6 - SUNBURST BOARD - W4L06240
5/8"x2 3/8"x7 1/2" (16x60x190)
Parts Identification
Wood Components
(NOT TO SCALE)
N7 - VERTICAL SUNBURST BOARD - W4L06239
5/8"x2 3/8"x12 1/4" (16x60x310)
Q1 - BENCH BOARD - W102502
1"x4 3/8"x47 1/2" (24x112x1205)
SB74 - SWING BEAM EXTENDED - W102419
2"x5 1/4"x89 1/2" (50x134x2274)
W71 - SWING BEAM SUPPORT - W4L04856
2"x3 3/8"x49 5/8" (50x86x1260)
E3 - FORT UPRIGHT - W2A01881
1 3/8"x3 3/8"x89 5/8" (36x86x2275)
RP1 - ROOF PANEL ASSEMBLY - W2A01882
1 3/8"x19 1/8"x48 7/8" (35x486x1243)
RP2 - ROOF PANEL ASSEMBLY - W2A01883
1 3/8"x16 1/8"x48 7/8" (35x410x1243)
DP1 - CABIN DOOR ASSEMBLY - W2A01884
1 3/4"x18 7/8"x45 7/8" (43x480x1166)
Parts Identification
Hardware
(4)
CR - SCREW PFH 8x3/4 - H100121
(30)
BN - SCREW PFH 8x1 - H100085
(370)
BR - SCREW PFH 8x1 1/8 - H100088
(97)
BP - SCREW PFH 8x1 1/2 - H100086
(2)
- T-40 TORX BIT - A100042
(143)
BS - SCREW PFH 8x1 3/4 - H100089
(52)
CK - SCREW PFH 8x2 - H100111
(2)
BV - SCREW PFH 8x2 1/4 - H100091
(41)
BT - SCREW PFH 8x2 1/2 - H100090
(3)
BW - SCREW PFH 8x3 - H100092
(2)
- T-30 TORX BIT - H100147
(2)
CY - SCREW PWH 8x5/8 - H100128
(13)
BC - SCREW PWH 8x3/4 - H100070
(26)
BE - T-NUT 1/4 - H100072
(26)
BA - BOLT PTH 1/4x3/4 - H100063
(89)
BG - T-NUT 5/16 - H100074
(15)
CJ - NUT LOCK 5/16 - H100110
Parts Identification
Hardware
(4)
AE - BOLT WH 5/16x5 3/4 - H100032
(15)
CM - BOLT WH 5/16x1/2 - H100115
(9)
YK - BOLT WH 5/16x3/4 - H100222
(1)
KA - BOLT WH 5/16x4 1/2 - H100021
(4)
QD - BOLT WH 5/16x4-1/4 - H100166
(15)
G - BOLT WH 5/16x1 1/4 - H100009
(2)
M - BOLT WH 5/16x2 1/2 - H100014
(14)
H - BOLT WH 5/16x1 1/2 - H100010
(9)
L - BOLT WH 5/16x2 1/4 - H100013
(10)
J - BOLT WH 5/16x1 3/4 - H100011
(6)
Y - LAG SCREW WH 5/16x1 1/2 - H100026
(31)
K - BOLT WH 5/16x2 - H100012
(41)
Z - LAG SCREW WH 5/16x2 - H100027
(2)
B - NUT BARREL WH 5/16x5/8 - H100004
(7)
D - NUT BARREL WH 5/16x7/8 - H100005
(11)
C - NUT BARREL WH 5/16x1 1/2 - H100006
(2)
AA - LAG SCREW WH 5/16x2 1/2 - H100028
(4)
LC - LAG SCREW WH 1/4x1-1/2 - H100145
(4)
LD - LAG SCREW WH 1/4x2 - H100146
Parts Identification
Hardware
(4)
AJ - BOLT HEX 5/16x1 1/4 - H100042
(2)
AN - BOLT HEX 5/16x2-3/4 - H100047
(124)
AC - WASHER LOCK EXT 8x19 - H100030
(6)
AD - WASHER LOCK EXT 12x19 - H100031
(4)
BX - WASHER SPLIT 5/16 - H100095
(26)
CG - WASHER LOCK INT 8x15 - H100108
(22)
CD - WASHER FLAT 8x27 - H100105
(4)
KV - WASHER LOCK EXT 6x15 - H100138
(4)
CB - WASHER SAFETY 17x30 - H100103
Parts Identification
Accessories
(NOT TO SCALE)
(1)
DR - SLIDE RAIL 10' BOTTOM LEFT GREEN - A100030
(1)
DS - SLIDE RAIL 10' BOTTOM RIGHT GREEN - A100031
(4)
DW - SLIDE SUPPORT TUBE 21.34x505 - A100034
(1)
DT - SLIDE RAIL 10' TOP LEFT GREEN - A100032
(6)
-
GREEN HC ROCK #1
-
A6P00036
(1)
TR - SLIDE RAIL 10' TOP RIGHT GREEN - A100033
(6)
-
GREEN HC ROCK #2
-
A6P00037
(1)
DX - SLIDE BED 10' LIGHT GREEN - A100035
(1)
DN - GLIDER SEAT DARK GREEN - A100025
(1)
TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325
(2)
- SWING SEAT GREEN - A6P00054
(1)
TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326
(2)
DO - CAPTAINS GLIDER ARM YELLOW - A100026
Parts Identification
Accessories
(NOT TO SCALE)
(2)
GD
-
L BRACKET 66x66x127
-
A100140
(4)
EY
-
TUBING CAP GLIDER SUPPORT
-
A100067
(8)
FA - QUICK LINK - A100069
(2)
-
HINGE (DOOR, SPRING LOADED)
-
A100327
(4)
EX
-
GLIDER BUSHING BYD GREEN
-
A100066
(2)
EW - GLIDER SUPPORT BYD GREEN - A100065
(1)
HZ - KNOB - A100071
(1)
SR - "B" REVISION TAG - A100315
(1) EH - LTP ID TAG (LARGE) AGES 3-10 - A100051
(6)
- GROUND STAKE REBAR - A4M00527 (4)
FX - HAND GRIP METAL GREEN 381 c/c - A100118
(2)
JV - HAND GRIP GREEN 816 c/c - A100134
(4)
JD - CHAIN GREEN 45" - A100092
(4)
EZ - CHAIN GREEN 51.25" - A100068
ROCKWALL
STEP 1
E72 - LEFT RAIL - W100036
1 3/8"x3 3/8"x61 3/4" (36x86x1570)
E73 - RIGHT RAIL - W100037
1 3/8"x3 3/8"x61 3/4" (36x86x1570)
M108 - TOP BOARD - W103105
5/8"x3 3/8"x27 7/8" (16x86x707)
M74 - ROCK WALL BOARD - W100987
5/8"x3 3/8"x26 5/8" (16x86x675)
M75 - ROCK WALL BOARD - W4L05240
5/8"x3 3/8"x26 5/8" (16x86x675)
M76 - ROCK WALL BOARD - W4L05239
5/8"x3 3/8"x26 5/8" (16x86x675)
SCREW PFH 8x1 1/2
(72 PLCS)
M74
M74
M76
M74
M75
M74
M76
M74
M75
M74
M76
M74
M75
M74
(74)
SCREW PFH
8x1 1/2
M76
M75
M74
M74
E72
E73
5/8
SCREW PFH 8x1 1/2
(2 PLCS)
M108
ROCKWALL
STEP 2
M102 - ATTACHMENT BOARD - W4L05242
5/8"x3 3/8"x27 7/8" (16x86x707)
M102
(2)
T-NUT 5/16
(4)
SCREW PFH
8x1 1/2
T-NUTS ON BACK SIDE
SCREW PFH 8x1 1/2
(4 PLCS)
ROCKWALL
STEP 3
- GREEN HC ROCK #2 - A6P00037
- GREEN HC ROCK #1 - A6P00036
NOTE ARROW DIRECTION FOR
PROPER ROCK INSTALLATION.
BOLT PTH 1/4x3/4
(24 PLCS)
WASHER LOCK INT 8x15
(24 PLCS)
(24)
WASHER
LOCK INT
8x15 (24)
BOLT PTH
1/4x3/4
(24)
T-NUT 1/4
T-NUT 1/4
(24 PLCS)
H77 - LEFT UPRIGHT - W100972
1"x3 3/8"x64 3/8" (24x86x1634)
5 FOOT LADDER ASSEMBLY
STEP 1
SCREW PFH 8x2
H76 - LADDER RUNG - W100611
1"x3 3/8"x18 1/8" (24x86x460)
H76
(10)
SCREW PFH
8x2
H77
5 FOOT LADDER ASSEMBLY
STEP 2
H78 - RIGHT UPRIGHT - W100973
1"x3 3/8"x64 3/8" (24x86x1634)
SCREW PFH 8x2
H78
(10)
SCREW PFH
8x2
M73 - REAR SUPPORT - W100610
5/8"x3 3/8"x19 1/4" (16x86x488)
M107 - ATTACHMENT BOARD - W103559
5/8"x3 3/8"x19 1/4" (16x86x488)
5 FOOT LADDER ASSEMBLY
STEP 3
M107
SCREW PFH 8x2
M73
(8)
SCREW PFH
8x2
FLUSH
1 1/4
5 FOOT LADDER ASSEMBLY
STEP 4
LAG SCREW WH 1/4x1-1/2
JV
JV - HAND GRIP GREEN 816 c/c - A100134
(4)
LAG SCREW
WH 1/4x1-1/2
STEP 1
TOP
DX - SLIDE BED 10' LIGHT GREEN - A100035
M70 - SLIDE BED SUPPORT - W100935
5/8"x3 3/8"x19 7/8" (16x86x505)
10 FOOT SLIDE ASSEMBLY
(3)
BOLT WH
5/16x1/2
(3)
T-NUT 5/16
(SEE SLIDE ASSEMBLY
INSTALLATION STEP FOR
DECK MOUNTING HOLE
DRILLING LOCATIONS).
DX - SLIDE BED 10' LIGHT GREEN
%2/7:+[
3/&6
7187
3/&6
0
BOTTOM
USE M70 SLIDE BED SUPPORT AS A
TEMPLATE FOR DRILLING BOTTOM
HOLE PATTERN IN SLIDE BED. BE SURE
TO PLACE SLIDE BRACE UP 1/2" FROM
BOTTOM EDGE OF SLIDE BED BEFORE
MARKING HOLE PATTERN. USE A 3/8"
DRILL BIT TO DRILL HOLE PATTERN.
TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.
DS - SLIDE RAIL 10' BOTTOM RIGHT GREEN - A100031
TR - SLIDE RAIL 10' TOP RIGHT GREEN - A100033
DT - SLIDE RAIL 10' TOP LEFT GREEN - A100032
DR - SLIDE RAIL 10' BOTTOM LEFT GREEN - A100030
10 FOOT SLIDE ASSEMBLY
STEP 2
Ɣ
REPEAT ON OTHER SIDE, MAKING A LEFT AND RIGHT ASSEMBLY.
(8)
BOLT WH
5/16x3/4
(8)
WASHER
LOCK EXT
8x19
(8)
NUT BARREL
WH 5/16x1 1/2
75
WASHER LOCK EXT 8x19
3/&6
BOLT WH 5/16x3/4
3/&6
NUT BARREL WH 5/16x1 1/2
3/&6
'6
Using an 1/8" drill bit,
Pilot drill all screw dimples along the bottom and end edge of the slide rails.
DW - SLIDE SUPPORT TUBE 21.34x505 - A100034
21.34 OD x 2.77 W x 505
10 FOOT SLIDE ASSEMBLY
STEP 3
Ɣ
PLACE (1) SLIDE RAIL ASSEMBLY ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE SLIDE RAIL (FIG. 1). HAVE A
HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND INSERT THE BED INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS
COMPLETELY DOWN IN THE SLIDE CAVITY.
Ɣ
INSTALL THE (4) SLIDE SUPPORT TUBES INTO THEIR RESPECTIVE PILOT LOCATIONS (FIG. 2).
SLIDE BED 10' LIGHT GREEN
67$57+(5(
),*
DW - SLIDE SUPPORT TUBE 21.34x505
3/&6
),*
10 FOOT SLIDE ASSEMBLY
STEP 4
Ɣ
ONCE THE SLIDE BED, SUPPORT TUBES, AND SUPPORT BOARD ARE COMPLETELY IN THE CAVITY AND
SUPPORT POCKET, SECURE USING 2-1/2" SCREWS AT EACH OF THE PILOT HOLE LOCATIONS AS SHOWN.
Ɣ
REPEAT PROCESS FOR OPPOSITE SLIDE RAIL.
(38)
SCREW PFH
8x2 1/2
SCREW PFH 8x2 1/2
3/&6
SCREW PFH 8x2 1/2
3/&6
SB74 - SWING BEAM EXTENDED - W102419
2"x5 1/4"x89 1/2" (50x134x2274)
GD - L BRACKET 66x66x127 - A100140
TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326
TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325
SWING BEAM ASSEMBLY
STEP 1
:$6+(5)/$7[
3/&6
%2/7+(;[
3/&6
(3)
BOLT WH
5/16x1 3/4
(2)
BOLT HEX
5/16x2-3/4
(3)
NUT BARREL
WH 5/16x7/8
(4)
WASHER
FLAT 8x27
(2)
NUT LOCK
5/16
187/2&.
3/&6
6%
%2/7:+[
3/&6
187%$55(/:+[
3/&6
6:,1*%($0(;7(16,21%5$&.(75,*+7
3/&
6:,1*%($0(;7(16,21%5$&.(7/()7
3/&
W71 - SWING BEAM SUPPORT - W4L04856
2"x3 3/8"x49 5/8" (50x86x1260)
E77 - ANGLE BRACE - W4L04854
1 3/8"x3 3/8"x74 3/8" (36x86x1890)
H79 - END SUPPORT - W4L04855
1"x3 1/2"x42" (24x86x1072)
SWING BEAM ASSEMBLY
STEP 2
:$6+(5/2&.(;7[
3/&
187%$55(/:+[
3/&
(
:
(1)
BOLT WH
5/16x4 1/2
(2)
LAG SCREW
WH 5/16x2
(2)
BOLT WH
5/16x2 1/4
(1)
NUT BARREL
WH 5/16x7/8
(5)
(1)
WASHER
LOCK EXT
8x19
(2)
WASHER
LOCK EXT
12x19
T-NUT 5/16
%2/7:+[
3/&
:$6+(5/2&.(;7[
3/&
(
7187
3/&6
+
/$*6&5(::+[
3/&6
:$6+(5/2&.(;7[
3/&6
%2/7:+[
3/&6
:$6+(5/2&.(;7[
3/&6
SWING BEAM ASSEMBLY
STEP 3
(2)
BOLT WH
5/16x1 3/4
(2)
BOLT WH
5/16x2 1/2
(2)
NUT BARREL
WH 5/16x7/8
(2)
NUT BARREL
WH 5/16x1 1/2
(2)
WASHER
LOCK EXT
8x19
(2)
WASHER
LOCK EXT
12x19
%2/7:+[
3/&6
:$6+(5/2&.(;7[
3/&6
%2/7:+[
3/&6
:
THESE BOLTS ARE REQUIRED
FOR IMPROVED STRUCTUAL
STRENGTH OF 'W71' SUPPORT
AND MUST BE INSTALLED.
187%$55(/:+[
3/&6
187%$55(/:+[
3/&6
:$6+(5/2&.(;7[
3/&6
EW - GLIDER SUPPORT BYD GREEN - A100065
SWING BEAM ASSEMBLY
STEP 4
EX - GLIDER BUSHING BYD GREEN - A100066
EY - TUBING CAP GLIDER SUPPORT - A100067
6%
%2/7:+[
3/&6
/$*6&5(::+[
3/&6
*/,'(56833257%<'*5((1
3/&6
(4)
6" SWING
HANGER
QUICK LINK
(2)
BOLT WH
5/16x5 3/4
(6)
WASHER
FLAT 8x27
(6)
(2)
LAG SCREW
WH 5/16x2 1/2
NUT LOCK
5/16
:$6+(5)/$7[
3/&6
187/2&.
3/&6
6:,1*+$1*(548,&./,1.
3/&6
187/2&.
3/&6
:$6+(5)/$7[
3/&6
*/,'(5%86+,1*%<'*5((1
3/&6
78%,1*&$3*/,'(56833257
3/&6
SWING BEAM ASSEMBLY
STEP 5
6%
(4)
NUT LOCK
5/16
(4)
WASHER
FLAT 8x27
(4)
WASHER
SAFETY
17x30
(4)
9 1/2" SWING
HANGER
QUICK LINK
187/2&.
3/&6
:$6+(5)/$7[
3/&6
:$6+(56$)(7<[
3/&6
6:,1*+$1*(548,&./,1.
3/&6
1. LOCK NUT MUST BE TIGHTENED
UNTIL LOOP IS TIGHT AGAINST THE
SAFETY WASHER.
2. SWING HANGER BOLT MUST BE
ORIENTED AS SHOWN TO AVOID
DAMAGE TO SWING HANGER BOLT.
DN - GLIDER SEAT DARK GREEN - A100025
JD - CHAIN GREEN 45" - A100092
GLIDER ASSEMBLY
DO - CAPTAINS GLIDER ARM YELLOW - A100026
FA - QUICK LINK - A100069
(2)
WASHER
FLAT 8x27
(2)
NUT LOCK
5/16
CHAIN GREEN 45"
(4 PLCS)
QUICK LINK
(4 PLCS)
WASHER FLAT 8x27
(2 PLCS)
NUT LOCK 5/16
(2 PLCS)
CAPTAINS GLIDER ARM YELLOW
(2 PLCS)
(2)
BOLT WH
5/16x5 3/4
GLIDER SEAT DARK GREEN
(1 PLC)
BOLT WH 5/16x5 3/4
(2 PLCS)
E1 - FORT UPRIGHT - W4L06233
1 3/8"x3 3/8"x89 5/8" (36x86x2275)
E2 - FORT UPRIGHT - W4L06234
1 3/8"x3 3/8"x89 5/8" (36x86x2275)
H1 - FLOOR SUPPORT - W4L06206
1"x3 3/8"x71 7/8" (24x86x1825)
G7 - CENTER ARCH WALL RAIL - W4L06205
1"x5 1/4"x40 7/8" (24x134x1037)
K3 - GROUND BOARD - W4L06196
5/8"x5 1/4"x63" (16x134x1601)
F2 - SUNDECK UPRIGHT - W4L06223
1 3/8"x2 3/8"x33 7/8" (36x60x861)
K11 - SIDE ARCH WALL RAIL - W4L06214
5/8"x5 1/4"x71 1/4" (16x134x1809)
STEP 1
•
EASE ASSEMBLY BY INSTALLING
T-NUTS FIRST WHEN CALLED OUT IN
ANY STEP.
(13)
T-NUT 5/16
BOLT WH 5/16x2 1/4
(3 PLCS)
WASHER LOCK EXT 8x19
(3 PLCS)
LAG SCREW WH 5/16x2
(4 PLCS)
WASHER LOCK EXT 8x19
(4 PLCS)
(17)
WASHER
LOCK EXT
8x19
(4)
LAG SCREW
WH 5/16x2
(10)
BOLT WH
5/16x2
(3)
BOLT WH
5/16x2 1/4
BOLT WH 5/16x2
(6 PLCS)
WASHER LOCK EXT 8x19
(6 PLCS)
K11
K3
BOLT WH 5/16x2
(4 PLCS)
WASHER LOCK EXT 8x19
(4 PLCS)
E2
E1
G7
F2
H1
NOTE HOLES FOR
PROPER ORIENTATION.
T-NUT 5/16
(3 PLCS)
T-NUT 5/16
(6 PLCS)
NOTE HOLES FOR
PROPER ORIENTATION.
T-NUT 5/16
(4 PLCS)
E1 - FORT UPRIGHT - W4L06233
1 3/8"x3 3/8"x89 5/8" (36x86x2275)
E3 - FORT UPRIGHT - W2A01881
1 3/8"x3 3/8"x89 5/8" (36x86x2275)
STEP 2
K10 - SIDE ARCH WALL RAIL - W4L06213
5/8"x5 1/4"x71 1/4" (16x134x1809)
H4 - FLOOR SUPPORT - W4L06208
1"x3 3/8"x71 7/8" (24x86x1825)
K3 - GROUND BOARD - W4L06196
5/8"x5 1/4"x63" (16x134x1601)
M7 - WALL RAIL - W4L06215
5/8"x3 3/8"x42 1/8" (16x86x1069)
F1 - SUNDECK UPRIGHT - W4L06222
1 3/8"x2 3/8"x33 7/8" (36x60x861)
(15)
T-NUT 5/16
NOTE HOLES FORWARD FOR
PROPER ORIENTATION.
BOLT WH 5/16x2 1/4
(3 PLCS)
WASHER LOCK EXT 8x19
(3 PLCS)
NOTE HOLES FORWARD FOR
PROPER ORIENTATION.
BOLT WH 5/16x2
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
K3
BOLT WH 5/16x2
(4 PLCS)
WASHER LOCK EXT 8x19
(4 PLCS)
F1
M7
H4
(15)
WASHER
LOCK EXT
8x19
(12)
BOLT WH
5/16x2
(3)
BOLT WH
5/16x2 1/4
BOLT WH 5/16x2
(6 PLCS)
WASHER LOCK EXT 8x19
(6 PLCS)
K10
E1
E3
T-NUT 5/16
(6 PLCS)
NOTE HOLE FOR
PROPER ORIENTATION.
T-NUT 5/16
(3 PLCS)
T-NUT 5/16
(2 PLCS)
T-NUT 5/16
(4 PLCS)
G3 - SB MOUNTING RAIL - W4L06211
1"x5 1/4"x43 3/4" (24x134x1110)
H2 - FLOOR SUPPORT - W4L06207
1"x3 3/8"x43 3/4" (24x86x1110)
STEP 3
H8 - WALL RAIL - W4L05241
1"x3 3/8"x43 3/4" (24x86x1110)
K4 - GROUND BOARD - W4L06197
5/8"x5 1/4"x43 3/4" (16x134x1110)
M4 - WALL RAIL - W102443
5/8"x3 3/8"x43 3/4" (16x86x1110)
M21 - WALL RAIL - W4L06203
5/8"x3 3/8"x43 3/4" (16x86x1110)
K7 - CENTER ARCH WALL RAIL - W4L06210
5/8"x5 1/4"x43 3/4" (16x134x1110)
K8 - WALL RAIL - W4L06212
5/8"x5 1/4"x43 3/4" (16x134x1110)
(8)
T-NUT 5/16
WASHER LOCK EXT 8x19
(4 PLCS)
LAG SCREW WH 5/16x2
(4 PLCS)
T-NUT 5/16
(4 PLCS)
K8
BOLT WH 5/16x4-1/4
(4 PLCS)
WASHER LOCK EXT 8x19
(4 PLCS)
LAG SCREW WH 5/16x2
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
H2
M4
LAG SCREW WH 5/16x2
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
LAG SCREW WH 5/16x2
(4 PLCS)
WASHER LOCK EXT 8x19
(4 PLCS)
K4
G3
T-NUT 5/16
(4 PLCS)
(28)
WASHER
LOCK EXT
8x19
(24)
LAG SCREW
WH 5/16x2
M21
K7
(4)
BOLT WH
5/16x4-1/4
LAG SCREW WH 5/16x2
(4 PLCS)
WASHER LOCK EXT 8x19
(4 PLCS)
H8
LAG SCREW WH 5/16x2
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
LAG SCREW WH 5/16x2
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
K4
LAG SCREW WH 5/16x2
(4 PLCS)
WASHER LOCK EXT 8x19
(4 PLCS)
STEP 4
M5 - LOWER ENCLOSURE SLAT - W102444
5/8"x3 3/8"x23" (16x86x583)
M22 - LOWER ENCLOSURE SLAT - W4L06202
5/8"x3 3/8"x23" (16x86x583)
(48)
SCREW PFH
8x1 1/8
SCREW PFH 8x1 1/8
(24 PLCS)
M22
M5
M22
M5
M22
SCREW PFH 8x1 1/8
(24 PLCS)
STEP 5
M5 - LOWER ENCLOSURE SLAT - W102444
5/8"x3 3/8"x23" (16x86x583)
(40)
SCREW PFH
8x1 1/8
SCREW PFH 8x1 1/8
(20 PLCS)
SCREW PFH 8x1 1/8
(20 PLCS)
M5
STEP 6
M5 - LOWER ENCLOSURE SLAT - W102444
5/8"x3 3/8"x23" (16x86x583)
(48)
SCREW PFH
8x1 1/8
SCREW PFH 8x1 1/8
(24 PLCS)
SCREW PFH 8x1 1/8
(24 PLCS)
M5
STEP 7
H5 - TABLE SUPPORT - W4L06201
1"x3 3/8"x6 1/2" (24x86x165)
SCREW PFH 8x3
(3 PLCS)
FLUSH
H5
(3)
SCREW PFH
8x3
STEP 8
K5 - TABLE TOP BOARD - W4L06198
5/8"x5 1/4"x43 3/4" (16x134x1110)
K6 - TABLE TOP BOARD - W4L06199
5/8"x5 1/4"x43 3/4" (16x134x1110)
(6)
SCREW PFH
8x1 1/2
K6
SCREW PFH 8x1 1/2
(6 PLCS)
K5
STEP 9
WASHER LOCK EXT 8x19
(4 PLCS)
BOLT WH 5/16x1 3/4
(4 PLCS)
H16
H16 - DOUBLE ANGLE GUSSET - W4L06204
1"x3 3/8"x15 7/8" (24x86x403)
(4)
T-NUT 5/16
(4)
LAG SCREW
WH 1/4x2
(4)
BOLT WH
5/16x1 3/4
T-NUT 5/16
(4 PLCS)
WASHER LOCK EXT 6x15
(4 PLCS)
LAG SCREW WH 1/4x2
(4 PLCS)
(4)
WASHER
LOCK EXT
6x15
(4)
WASHER
LOCK EXT
8x19
A
STEP 10
5 FT. ROCK WALL ASSEMBLY
(2)
WASHER
LOCK EXT
8x19
(2)
BOLT WH
5/16x1 1/2
BOLT WH 5/16x1 1/2
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
5 FT. ROCK WALL ASSEMBLY
STEP 11
H3
H3 - FLOOR JOIST - W102448
1"x3 3/8"x43 5/8" (24x86x1108)
SCREW PFH 8x2
(12 PLCS)
H3
FLUSH
(12)
SCREW PFH
8x2
STEP 12
M6
N2
M6 - FLOOR BOARD - W102445
5/8"x3 3/8"x71 7/8" (16x86x1825)
N1 - FLOOR BOARD - W102446
5/8"x2 3/8"x34" (16x60x864)
N2 - FLOOR BOARD - W4L06224
5/8"x2 3/8"x26 3/4" (16x60x679)
N1
N1
(96)
SCREW PFH
8x1 3/4
N2
SCREW PFH 8x1 3/4
(96 PLCS)
STEP 13
M1 - WALL RAIL - W4L06219
5/8"x3 3/8"x42 1/8" (16x86x1069)
K12 - WALL RAIL - W4L06221
5/8"x5 1/4"x11 5/8" (16x134x296)
M17 - WALL RAIL - W4L06209
5/8"x3 3/8"x7 5/8" (16x86x195)
M27 - WALL RAIL - W4L06220
5/8"x3 3/8"x11 5/8" (16x86x296)
T-NUT 5/16
(2 PLCS)
M1
WASHER LOCK EXT 8x19
(2 PLCS)
BOLT WH 5/16x2
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
LAG SCREW WH 5/16x2
(2 PLCS)
(2)
T-NUT 5/16
K12
(10)
WASHER
LOCK EXT
8x19
(1)
LAG SCREW
WH 5/16x1 1/2
(7)
LAG SCREW
WH 5/16x2
(2)
BOLT WH
5/16x2
WASHER LOCK EXT 8x19
(2 PLCS)
LAG SCREW WH 5/16x2
(2 PLCS)
M27
WASHER LOCK EXT 8x19
(1 PLC)
LAG SCREW WH 5/16x2
(1 PLC)
WASHER LOCK EXT 8x19
(1 PLC)
LAG SCREW WH 5/16x1 1/2
(1 PLC)
WASHER LOCK EXT 8x19
(1 PLC)
LAG SCREW WH 5/16x2
(1 PLC)
WASHER LOCK EXT 8x19
(1 PLC)
LAG SCREW WH 5/16x2
(1 PLC)
M17
STEP 14
M9 - WALL RAIL - W4L06218
5/8"x3 3/8"x40" (16x86x1016)
M4 - WALL RAIL - W102443
5/8"x3 3/8"x43 3/4" (16x86x1110)
M16
M3 - WALL RAIL - W4L06200
5/8"x3 3/8"x10 7/8" (16x86x276)
M16 - WALL SLAT - W4L05237
5/8"x3 3/8"x28 1/8" (16x86x715)
SCREW PFH 8x1 1/8
(8 PLCS)
(8)
SCREW PFH
8x1 1/8
(3)
T-NUT 5/16
(5)
WASHER
LOCK EXT
8x19
(2)
LAG SCREW
WH 5/16x2
(3)
BOLT WH
5/16x2
T-NUT 5/16
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
BOLT WH 5/16x2
(2 PLCS)
M9
M16
E
M3
BOLT WH 5/16x2
(1 PLC)
WASHER LOCK EXT 8x19
(1 PLC)
T-NUT 5/16
(1 PLC)
LAG SCREW WH 5/16x2
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
M4
M10 - ARCH WALL SLAT - W4L06226
5/8"x3 3/8"x42 7/8" (16x86x1090)
STEP 15
6 13/16"
M10
SCREW PFH 8x1 1/8
(2 PLCS)
M23 - ARCH WALL SLAT - W4L05238
5/8"x3 3/8"x42 7/8" (16x86x1090)
6 13/16"
(12)
SCREW PFH
8x1 1/8
SCREW PFH 8x1 1/8
(4 PLCS)
3 7/16"
SCREW PFH 8x1 1/8
(2 PLCS)
M23
3 7/16"
SCREW PFH 8x1 1/8
(4 PLCS)
M10 - ARCH WALL SLAT - W4L06226
5/8"x3 3/8"x42 7/8" (16x86x1090)
STEP 16
6 13/16"
M28
SCREW PFH 8x1 1/8
(4 PLCS)
SCREW PFH 8x1 1/8
(4 PLCS)
M28 - DOUBLE ARCH WALL SLAT - W4L06225
5/8"x3 3/8"x42 7/8" (16x86x1090)
6 7/8"
(14)
SCREW PFH
8x1 1/8
3 7/16"
M10
3 9/16"
SCREW PFH 8x1 1/8
(2 PLCS)
SCREW PFH 8x1 1/8
(4 PLCS)
M19 - WALL RAIL - W4L06228
5/8"x3 3/8"x43 3/4" (16x86x1110)
M20 - ROOF SUPPORT - W4L06229
5/8"x3 3/8"x43 3/4" (16x86x1110)
STEP 17
BOLT WH 5/16x1 1/4
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
M19
T-NUT 5/16
(2 PLCS)
T-NUT 5/16
(2 PLCS)
BOLT WH 5/16x1 1/4
(2 PLCS)
WASHER LOCK EXT 8x19
(2 PLCS)
M20
(4)
BOLT WH
5/16x1 1/4
(4)
WASHER
LOCK EXT
8x19
(4)
T-NUT 5/16
STEP 18
SCREW PFH 8x2
(8 PLCS)
WASHER LOCK EXT 8x19
(4 PLCS)
BOLT WH 5/16x1 1/4
(4 PLCS)
NOTE HOLE LOCATION FOR
PROPER ORIENTATION.
TOP
M32 - ROOF SUPPORT - W4L06230
5/8"x3 3/8"x45 1/2" (16x86x1157)
M32
T-NUT 5/16
(4 PLCS)
(8)
SCREW PFH
8x2
(4)
BOLT WH
5/16x1 1/4
(4)
WASHER
LOCK EXT
8x19
(4)
T-NUT 5/16
M32
M11 - ARCH WALL SLAT - W102459
5/8"x3 3/8"x42 7/8" (16x86x1090)
STEP 19
M12 - ARCH WALL SLAT - W102460
5/8"x3 3/8"x42 7/8" (16x86x1090)
M13 - WALL SLAT - W102461
5/8"x3 3/8"x27" (16x86x685)
(38)
SCREW PFH
8x1 1/8
SCREW PFH 8x1 1/8
(12 PLCS)
M13
M11 M12 M11 M13
SCREW PFH 8x1 1/8
(6 PLCS)
SCREW PFH 8x1 1/8
(4 PLCS)
SCREW PFH 8x1 1/8
(16 PLCS)
STEP 20
M12 - ARCH WALL SLAT - W102460
5/8"x3 3/8"x42 7/8" (16x86x1090)
M13 - WALL SLAT - W102461
5/8"x3 3/8"x27" (16x86x685)
M14 - WALL SLAT - W102499
5/8"x3 3/8"x42 7/8" (16x86x1090)
(46)
SCREW PFH
8x1 1/8
SCREW PFH 8x1 1/8
(12 PLCS)
M12 M14 M12
M13
SCREW PFH 8x1 1/8
(6 PLCS)
SCREW PFH 8x1 1/8
(8 PLCS)
M13
SCREW PFH 8x1 1/8
(20 PLCS)
STEP 21
M13 - WALL SLAT - W102461
5/8"x3 3/8"x27" (16x86x685)
M25 - UPPER SLAT - W102518
5/8"x3 3/8"x15" (16x86x380)
4 3/16 2 11/16
M26 - UPPER ARCHED SLAT - W102519
5/8"x3 3/8"x15" (16x86x380)
(32)
SCREW PFH
8x1 1/8
SCREW PFH 8x1 1/8
(12 PLCS)
SCREW PFH 8x1 1/8
(12 PLCS)
M13
SCREW PFH 8x1 1/8
(4 PLCS)
M25 M26 M25
M13
NOTE LOCATION OF ARCH
FOR PROPER ASSEMBLY.
SCREW PFH 8x1 1/8
(4 PLCS)
STEP 22
M13 - WALL SLAT - W102461
5/8"x3 3/8"x27" (16x86x685)
(16)
SCREW PFH
8x1 1/8
SCREW PFH 8x1 1/8
(8 PLCS)
SCREW PFH 8x1 1/8
(8 PLCS)
M13
M13
STEP 23
M13 - WALL SLAT - W102461
5/8"x3 3/8"x27" (16x86x685)
(16)
SCREW PFH
8x1 1/8
M13
2 5/8"
(5 SPCS)
SCREW PFH 8x1 1/8
(8 PLCS)
SCREW PFH 8x1 1/8
(8 PLCS)
STEP 24
BOLT WH 5/16x1 1/4
(4 PLCS)
WASHER LOCK EXT 8x19
(4 PLCS)
M33 - ROOF TRUSS - W4L06231
5/8"x3 3/8"x34 5/8" (16x86x880)
M33
T-NUT 5/16
(4 PLCS)
(4)
BOLT WH
5/16x1 1/4
M33
M33
M33
(4)
WASHER
LOCK EXT
8x19
(4)
T-NUT 5/16
STEP 25
RP1
RP1 - ROOF PANEL ASSEMBLY - W2A01882
1 3/8"x19 1/8"x48 7/8" (35x486x1243)
RP1
(12)
SCREW PFH
8x1 3/4
SCREW PFH 8x1 3/4
(12 PLCS)
STEP 26
RP2
RP2 - ROOF PANEL ASSEMBLY - W2A01883
1 3/8"x16 1/8"x48 7/8" (35x410x1243)
RP2
(16)
SCREW PFH
8x1 3/4
SCREW PFH 8x1 3/4
(16 PLCS)
STEP 27
N7
K93 - GABLE BOARD - W4L06237
3/8"x3 3/8"x32 3/4" (11x86x833)
K92 - GABLE BOARD - W4L06236
3/8"x3 3/8"x39 1/8" (11x86x995)
K91 - GABLE BOARD - W4L06235
3/8"x3 3/8"x45 1/2" (11x86x1157)
SCREW PFH 8x1 1/8
(6 PLCS)
N6
SCREW PFH 8x1
(2 PLCS)
N6
K93
1 9/16"
K2
K2 - HALF MOON PLATE - W4L06238
5/8"x5 1/4"x13 3/8" (16x134x340)
N6 - SUNBURST BOARD - W4L06240
5/8"x2 3/8"x7 1/2" (16x60x190)
N7 - VERTICAL SUNBURST BOARD - W4L06239
5/8"x2 3/8"x12 1/4" (16x60x310)
S
(24)
SCREW PFH
8x1 1/8
(28)
SCREW PFH
8x1
1 13/16"
ASSEMBLE TWO SUNBURST ASSEMBLIES.
SCREW PFH 8x1 1/8
(6 PLCS)
SCREW PFH 8x1
(12 PLCS)
SUNBURST ASSEMBLY
K92
K91
ASSEMBLE GABLE THE SAME ON BOTH SIDES.
H6 - BENCH SUPPORT - W102500
1"x3 3/8"x14 1/8" (24x86x360)
M15 - BENCH CLEAT - W102503
5/8"x3 3/8"x7 7/8" (16x86x200)
H7 - BENCH SUPPORT - W102501
1"x3 3/8"x8 5/8" (24x86x220)
STEP 28
Q1
SCREW PFH 8x1 1/8
(4 PLCS)
M15
S
Q1
Q1 - BENCH BOARD - W102502
1"x4 3/8"x47 1/2" (24x112x1205)
(4)
SCREW PFH
8x1 1/8
(8)
BOLT WH
5/16x1 1/2
(8)
T-NUT 5/16
(8)
WASHER
LOCK EXT
8x19
H7
T-NUT 5/16
(8 PLCS)
H6
BOLT WH 5/16x1 1/2
(8 PLCS)
WASHER LOCK EXT 8x19
(8 PLCS)
STEP 29
(1) BENCH ASSEMBLY
(8)
SCREW PFH
8x1 3/4
BENCH ASSEMBLY
SCREW PFH 8x1 3/4
(8 PLCS)
STEP 30
WASHER LOCK EXT 8x19
(2 PLCS)
BOLT WH 5/16x2
(2 PLCS)
M3
M3 - WALL RAIL - W4L06200
5/8"x3 3/8"x10 7/8" (16x86x276)
T-NUT 5/16
(2 PLCS)
(2)
WASHER
LOCK EXT
8x19
(2)
T-NUT 5/16
(2)
BOLT WH
5/16x2
M3
STEP 31
M8 - WALL SLAT - W102455
5/8"x3 3/8"x55 5/8" (16x86x1414)
M34 - WALL SLAT - W4L06232
5/8"x3 3/8"x55 5/8" (16x86x1414)
(20)
SCREW PFH
8x1 1/8
DOOR HINGE PILOT HOLES
FACE OUTWARD.
SCREW PFH 8x1 1/8
(8 PLCS)
M8
M34 M8
SCREW PFH 8x1 1/8
(4 PLCS)
SCREW PFH 8x1 1/8
(8 PLCS)
H15 - OVERHANG CLEAT - W102627
1"x3 3/8"x5 1/4" (24x86x134)
G12 - OVERHANG BOARD - W102586
1"x5 1/4"x13 3/4" (24x134x350)
G13 - OVERHANG BOARD - W102587
1"x5 1/4"x13 3/4" (24x134x350)
G15 - OVERHANG BOARD - W102589
1"x5 1/4"x3 1/2" (24x134x90)
G14 - OVERHANG BOARD - W102588
1"x5 1/4"x3 1/2" (24x134x90)
STEP 32
G13
G12
SCREW PFH 8x1 3/4
(4 PLCS)
G14
H15
SCREW PFH 8x1 1/2
(4 PLCS)
G15
(4)
SCREW PFH
8x1 1/2
(7)
SCREW PFH
8x1 3/4
(2)
SCREW PFH
8x2 1/4
OVERHANG ASSEMBLY
SCREW PFH 8x2 1/4
(2 PLCS)
SCREW PFH 8x1 3/4
(3 PLCS)
2"
DRILL THROUGH USING
AN 1/8" DRILL BIT.
STEP 33
H14 - DOOR STOP - W102590
1"x3 3/8"x4 7/8" (24x86x125)
(4)
SCREW PFH
8x1 1/2
SCREW PFH 8x1 1/2
(4 PLCS)
19 1/2"
1 9/16"
H14
STEP 34
DP1 - CABIN DOOR ASSEMBLY - W2A01884
1 3/4"x18 7/8"x45 7/8" (43x480x1166)
(2)
-
HINGE (DOOR, SPRING LOADED)
-
A100327
(12)
SCREW PWH
8x3/4
SCREW PWH 8x3/4
(6 PLCS)
HINGE (DOOR, SPRING LOADED)
DP1
SCREW PWH 8x3/4
(6 PLCS)
HINGE (DOOR, SPRING LOADED)
STEP 35
(1)
HZ - KNOB - A100071
(1)
SCREW PFH
8x1 1/2
KNOB
SCREW PFH 8x1 1/2
(1 PLC)
U
STEP 36
WASHER LOCK EXT 8x19
(2 PLCS)
BOLT WH 5/16x1 1/2
(2 PLCS)
(1) 5 FT. LADDER ASSEMBLY
T-NUT 5/16
(2 PLCS)
(2)
WASHER
LOCK EXT
8x19
(2)
T-NUT 5/16
(2)
BOLT WH
5/16x1 1/2
STEP 37
(2)
FX - HAND GRIP METAL GREEN 381 c/c - A100118
(4)
BOLT WH
5/16x1/2
(4)
T-NUT 5/16
W
BOLT WH 5/16x1/2
(4 PLCS)
HAND GRIP METAL GREEN 381 c/c
T-NUT 5/16
(4 PLCS)
STEP 38
(2)
FX - HAND GRIP METAL GREEN 381 c/c - A100118
(4)
BOLT WH
5/16x1/2
(4)
T-NUT 5/16
T-NUT 5/16
(4 PLCS)
Y
BOLT WH 5/16x1/2
(4 PLCS)
HAND GRIP METAL GREEN 381 c/c
STEP 39
(1) 10 FT. SLIDE ASSEMBLY
6 7/16"
6 7/16"
2 5/8"
(3)
BOLT WH
5/16x1/2
1"
(3)
T-NUT 5/16
1 13/16"
SLIDE HOLE DRILLING LOCATIONS
BOLT WH 5/16x1/2
(3 PLCS)
10 FT. SLIDE ASSEMBLY
T-NUT 5/16
(3 PLCS)
STEP 40
(1) 4 FT. SWINGBEAM ASSEMBLY
AB
WASHER SPLIT 5/16
(4 PLCS)
BOLT HEX 5/16x1 1/4
(4 PLCS)
WASHER FLAT 8x27
(4 PLCS)
(4)
WASHER
SPLIT 5/16
(4)
WASHER
FLAT 8x27
(4)
BOLT HEX
5/16x1 1/4
4 FT. SWINGBEAM ASSEMBLY
STEP 41
- SWING SEAT GREEN - A6P00054
EZ - CHAIN GREEN 51.25" - A100068
FA - QUICK LINK - A100069
(1) CAPTAINS GLIDER ASSEMBLY
TIGHTEN
QUICK
LINK
INSERT CHAIN
INTO
QUICK LINK
CAPTAINS GLIDER ASSEMBLY
CHAIN GREEN 51.25"
(4 PLCS)
QUICK LINK
(4 PLCS)
SWING SEAT GREEN
(2 PLCS)
ASSEMBLE TWO SWING ASSEMBLIES.
STEP 42
(1) EH - LTP ID TAG (LARGE) AGES 3-10 - A100051
"B" REVISION TAG
(1)
SR - "B" REVISION TAG - A100315
(4)
SCREW PFH
8x3/4
SCREW PWH 8x5/8
(2 PLCS)
(2)
SCREW PWH
8x5/8
LTP ID TAG (LARGE) AGES 3-10
SCREW PFH 8x3/4
(4 PLCS)
STAKE A
(6)
- GROUND STAKE REBAR - A4M00527
ANCHORING INSTRUCTIONS
NOTE:
FAILURE TO USE GROUND STAKES CAN
VOID WARRANTY & CAUSE INJURY!
STAKE A STAKE A
(2)
BOLT WH
5/16x1 1/4
LAG SCREW
(4)
WH 5/16x1 1/2
(2)
NUT BARREL
WH 5/16x5/8
(2)
WASHER
LOCK EXT
12x19
BOLT WH 5/16x1 1/4
(2 PLCS)
NUT BARREL WH 5/16x5/8
(2 PLCS)
SWING
WASHER LOCK EXT 12x19
(2 PLCS)
GROUND STAKE REBAR
(2 PLCS)
SWING
STEP 43
DRIVE STAKES INTO GROUND
AGAINST BOARDS WHERE SHOWN.
ATTACH TO SWING BEAM USING
1-1/4" BOLTS, WASHERS AND 5/8"
BARREL NUTS, IN PLACES WHERE
"STAKE A" IS NOTED.
DRIVE STAKES INTO GROUND
AGAINST GROUND BOARDS WHERE
SHOWN. ATTACH TO FORT
ASSEMBLY USING 1-1/2" LAG
SCREWS, IN ALL PLACES WHERE
"STAKE B" IS NOTED.
STAKE B
STAKE B
STAKE B
LAG SCREW WH 5/16x1 1/2
(4 PLCS)
GLIDER
GROUND STAKE REBAR
(4 PLCS)
STAKE B
STAKE B
FINAL STEP
DOUBLE CHECK EVERY BOLT,
SCREW AND NUT FOR TIGHTNESS.
MAKE SURE EVERY BOARD IS
SECURE AND MAKE SURE THE
PLAY SET IS LEVEL.
ENJOY YOUR NEW PLAY SET!
Limited Warranty
This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time
Products.
Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories. All wood carries a five (5) year pro-rated warranty against rot and decay. Refer to the schedule below for charges associated with replacement of parts under this Limited Warranty. In addition,
Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing from or damaged in the original packaging.
This warranty applies to the original owner and registrant and is
non-transferable
. Regular maintenance is required to assure maximum life and performance of this product and failure by the owner to maintain the product according to the maintenance requirements may void this warranty. Maintenance guidelines are provided in the Owner’s Manual.
This Limited Warranty does not cover:
•
Labor for any inspection
•
Labor for replacement of any defective item(s)
•
Incidental or consequential damages
•
Cosmetic defects which do not affect performance or integrity of a part or the entire product
•
Vandalism, improper use, failure due to loading or use beyond the capacities stated in the applicable
Assembly Manual.
•
Acts of nature including but not limited to wind, storms, hail, floods, excessive water exposure
•
Improper installation including but not limited to installation on uneven, unlevel, or soft ground
•
Minor twisting, warping, checking, or any other natural occurring properties of wood that do not affect performance or integrity
Backyard Discovery products have been designed for safety and quality. Any modifications made to the original product could damage the structural integrity of the unit leading to failure and possible injury.
Modification voids any and all warranties and Backyard Discovery assumes no liability for any modified products or consequences resulting from failure of a modified product.
This product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a Backyard Discovery product be used in public settings. Such use may lead to product failure and potential injury. Any and all public use will void this warranty. Backyard Discovery disclaims all other representations and warranties of any kind, express or implied.
This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state or province to province. This warranty excludes all consequential damages, however, some states do not allow the limitation or exclusion of consequential damages and therefore this limitation may not apply to you.
Pro Rated Part Replacement Schedule
All Parts
0-30 days from date of purchase
31 days to 1 year
Wood Rot and Decay Only
1 year
2 years
3 years
4 years
5 years
Over 5 years
$0 and free shipping
$0 + S&H
$0 and free shipping
20% + S&H
40% + S&H
60% + S&H
80% + S&H
100% + S&H
Rev5/20/10 BRS
NOTES:
NOTES:
Advertisement