USER MANUAL

Table of Contents

Safety Information

Specifications

3

4

Photometrics 5

Main Power Connection

DMX 512 Connection

DMX Profile

7

7

8

Rail Mounted Controller 8

Main Control Menu 9

Size and Weight 11

Rigging the Fixture

Cleaning & Maintenance

Parts List

12

12

12

Check that the unit has not been damaged during transport

Protection Against Fire

1.

3.

4.

5.

6.

Maintain a minimum of 1 foot distance from any type of flame.

Replace fuse only with the specified type and rating.

Do Not install the unit to close to a heat source.

Make sure cable are properly secured

Maximum surface operating temperature 140 º.

Protection Against Electrical Fire

1.

Disconnect power before servicing.

2.

For connection to main power supply proceed to page 7.

3.

This unit must be earthed. (electronically grounded)

4.

This fixture must not be left on for long periods of time.

Protection Against Mechanical Hazards

1.

2.

3.

Use safety chain when hanging unit.

Use quality clamps or bolts when positioning unit

Do not open unit while it is on, risk of electrical shock.

3

Technical Information

Part Numbers

Fixture

DMX Connectors:

Power Connections:

Thermal:

Display

:

Fastening System:

Zoom Angle:

Color:

CTO:

Focus:

Iris:

Dimmer:

Shutter:

7048 Drama FS LED 900

Mechanical Specifications

3 and 5 pin XLR connectors in/out

Panel mount Power Con type in/out connection (Nema 5 15 to Blue power con type cable included)

Maximum ambient temperature 40° C

Maximum surface temperature 60° C

Digital

Mounting joke for stand ( black diecast aluminum stand included)

8° to 13°

5 Color Wheel with Fader and DMX Control

3 CTO Filters 4353k, 4997k, and 5062k with Fader and DMX Control

Mechanical Focus with Fader and DMX Control

Mechanical Iris with Fader and DMX Control

Electronic Dimmer with Fader and DMX Control

Electronic Shutter with DMX Control only

Electrical Specifications

LED Type:

CRI:

CCT:

350W COB LED

91.1>

5080K on Open

LED Lifetime: *

60,000 to 100,000 hours

Power Consumption:

Universal 100 240V 50/60 Hz

Electronic

Ballast:

Watts:

Amps:

490W

4.20

Control & Programming

Protocol:

DMX Channels:

DMX 512

7 Channel Dimmer, Strobe, Iris, Color, CTO, Focus, Zoom

Operating Mode:

Rail Mounted Controller (included)

DMX Controlled

4

*average

Photometrics

5

6

Main Power Connection

Caution!

1.

Do not connect fixture to a dimmer system.

2.

This unit has Auto switching power supply. It will respond to 110V or 220V automatically

3.

This unit must be earthed. (electronically grounded)

4.

Replace fuse only with the specified type and rating.

5.

Power link only 3 units @110V or 6 units @ 220V

The occupation of the connection cable is as follows:

This fixture is equipped with an electronic power supply that will let the unit operate from 100V to 240V from 50Hz to 60Hz

Cable (USA) Cable (EU) Pin 110V 220V

Black

White

Green

Brown

Light Blue

Yellow/Green

Live

Neutral

Ground

L

N

L

L

110V—Connection

N L

220V—Connection

L L

DMX

-

512 Connection

The fixture is equipped with 5 pin XLR cable mounted sockets for DMX input and output. The sockets are wired in parallel. Only use a shielded twisted pair cable designed for RS 485 and 5 pin XLR plugs and connectors in order to connect the controller with the fixture or the fixture with another.

DMX—Input

DMX—Output

1. Ground

1 2

1

2

5

4

2. Signal ( )

3. Signal (+)

2

1

5

1

3 3

4. N/A

5. 12V DC

3

4

3

2

Caution!

1.

No not connect any other device or controller that is using pin 5 for data or voltage.

2.

At the last fixture the DMX signal needs to be terminated with a terminator. Solder a 120

Ohm resistor between the ( ) and the (+) signal into a 3 or 5 pin XLR plug and plug it in to the last fixture on the signal run. Pre manufactured terminator plugs are available for purchase from your

Mega Lite dealer (P DMXT).

7

DMX Profile

Drama LED FS 900

DMX Channel

1

Function

Dimmer

Description

Dimmer Off to Full

No Function

2

3

Strobe

Iris

Strobe (slow to fast)

Pulse (slow to fast)

Reverse Pulse (slow to fast)

Random (slow to fast)

Iris (Open to Close)

Open

5

4

6

7

Color

CTO

Zoom

Focus

Red

Green

Magenta

Yellow

Blue

Orange

Purple

Open (8000K)

5600K

4500K

3200K

Zoom

Focus

Rail Mounted Controller Operation

Value

0 255

0 1

2 127

128 159

160 191

192 255

0 255

0 31

32 63

64 95

96 127

128 159

160 191

192 223

224 255

0 63

64 127

128 191

192 255

0 255

0 255

0

0

Init

255

0

0

255

46

Addressing the Fixture:

Fixture need to be set to DMX Start address 001 and fixture controller needs to be plugged in to the 5 pin In DMX on the fixture. (Note you can ’ t connect DMX signal and Controller signal at the same time, DMX Signal will take precedence )

Record Function:

Press the red record button. Make sure lamp is on, adjust the fader control to reflect the scene you will want to record. Once adjusted prese the Preset button you would like to record to. Preset maybe recorded over by repeating the same process.

Playback Function:

Turn off the Record button. Press the preset button from 1 to 7 to select a recorder preset.

8

Main Control Menu

The control board on the fixture base is your interface to access and control all the functions on the unit. It ’ s LCD display gives you a code view of the options and functions. The following will explain each function and its options.

ESC

Enter

Up

Down

Main Menu

Fixture Address

Information

Personality

Test Program

Master/Slave

Manual Mode

Setup Menu

Press the

Enter

button to select Set Up options.

DMX Address

001

DMX Address

Press

Enter

to select the DMX start address. Use the

Up/ Down

buttons to select desired start address.

Main Menu

Fixture Address

Information

Personality

Information

Press the

Enter

button to select Information options.

—Fixture Info—

Power On Time

Lamp Temperature

Version

Power On Time

Will give you the amount of hours the fixture has been on for. The clock can be reset by resetting the timer.

—Fixture Info—

Power On Time

Lamp Temperature

Version

Lamp Temp

Will give you the LED lamp area temperature reading. Do not operate with a temperature exceeding 60°C

—Fixture Info—

Power On Time

Lamp Temperature

Version

Version

Operating software Version Reading

Main Menu

Fixture Address

Information

Personality

Personality

Press the

Enter

button to select Personality options.

9

—Personality—

Display Adjust

Iris Reverse

Color Presetting

Shut Presetting

Display Adjust

—Personality—

Display Adjust

Iris Reverse

Color Presetting

Shut Presetting

Iris Reverse

Display Turned

: Invert Display reading On or Off

Select Logo:

For manufacturing Use

Select Language

: Select Between English and Chinese

Invert Iris Operation On or Off

—Personality—

Display Adjust

Iris Reverse

Color Presetting

Shut Presetting

Color Presetting

Turns off or on the use of the color wheel

—Personality—

Display Adjust

Iris Reverse

Color Presetting

Shut Presetting

Shutter Presetting

Turns On or Off the use of the Shutter function on DMX Controlled Mode

Main Menu

Test Program

Master/Slave

Manual Mode

Test Program

Press the

Enter

button to select to run a built in Program that will test all fixture functions.

Main Menu

Test Program

Master/Slave

Manual Mode

Master/Slave

Press the

Enter

button to select to run fixture in

Master

or

Slave

Mode press

Enter

to confirm. In Slave mode fixture will work as an independent fixture and will not send DMX commands out. In Master mode the fixture Rail Controller will work as the master controller and will send a DMX command to other fixtures to follow the master units functions. Additional fixtures will

require a DMX Signal connection and to be addressed on start channel 001.

Main Menu

Test Program

Master/Slave

Manual Mode

Manual Mode

Press the

Enter

button mechanical and electronic functions of the fixture will now ne able to be used via the display. Functions

10

Size and Weight

Side View

34.5” (with out controller)

Front View

Top View

17.75” 3.5” 13.25” 8.15”

10.33”

13.5”

Drama FS LED 900

Size

10.33” x 34.5” x 13.5”

Packaged Size

39.5” x 15” x 15.5”

Weight

Net 34.30lb

Gross 42.35lb

11

P

-

Stand

-

2 (included)

Size

38.25” x 71.25” Max

Packaged Size

48” x 6” x 6”

Weight

Net 19lb

Gross 20lb

Rigging the Fixture

Caution!

1.

The installations must be carried out by an authorized dealer or trained professional.

2.

Unit may cause severe injures if you have doubts concerning the safety do not install.

3.

Unit is to be 24inches away from flammable materials (decoration material)

4.

Use high quality installation equipment to hang unit.

When rigging a unit it is very important that you follow common safety procedures. Rigging requires extensive experience including but not limited to calculating working loads, material being used and periodic safety inspections. If you lack these qualifications, do not attempt the installation yourself, instead use a professional structural rigger.

When rigging the unit always be secured with a secondary safety attachment. The installation location of the projector has got to be built in the way that it can hold 10 times the weight for 1 hour with out any harming. Installation should be checked at least one time a year by a skilled person.

Cleaning and Maintenance

Installation

M

aintenance:

The operator has to make sure that the unit is operating safely and has the installations and electronics checked by an expert every 2 years.

The following points have to be considered during the inspection:

1) All screws used for installing the device or part of the device have to be tightly connected and must not be corroded.

2) There must not be any deformations on the housing, fixation and installation spots (ceiling, suspension, trussing).

3) The electronic power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments.

Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed.

4) All ventilation ports need to be free of debris to ensure proper ventilation of the fixture.

Note:

There is no serviceable parts inside the device except. Maintenance and service operations are to be carried out by authorized dealers.

Replacing the fuse:

When possible only replace the fuse with the same type and rating.

Replacing the power cable:

If the power cable of this device becomes damaged, it has to be replaced by authorized dealers or trained professional only.

Should you have further questions , please contact your dealer.

Parts List

Accessories

7046 LED

7048 PCB MAI

7048 POW

7046 CON POW

7048 KNO BAS

7048 PCB CON

7048 PCB DRI

7048 PCB DIS

7048 BAN ZOO

LED

Main PCB card

Power Supply

Male & Female Power Connection

Base Knob Set

Controller PCB

LED Driver

Display

Zoom Ban

P STAND 2

CAS 7048 1

Black Diecast Aluminum Stand (included)

Road Case for Fixture and Stand

12

Warranty Information

Warranty Conditions

Unless otherwise stated in writing, your product is covered by a one year parts and labor limited warranty.

LED ’ s and LAMPS are not guaranteed to match in color temperature or output.

It is the owner ’ s responsibility to furnish receipts or invoices for verification of purchase, date, and reseller or distributor.

If purchase date cannot be provided, date of manufacture will be used to determine warranty period.

Goods returned under warranty must follow the proper authorization procedure and must be accompanied by a copy of the original invoice.

Goods repaired under warranty will be returned to the owner with the freight prepaid by MSI via the most economical means of shipment.

Repair or replacement as provided for under this warranty is the exclusive remedy of the consumer. MEGA SYSTEMS

INC. makes no warranties, express or implied, with respect to any product, and Mega Systems specifically disclaims any warranty of merchantability or fitness for a particular purpose. Mega Systems shall not be liable for any indirect, incidental or consequential damage, including lost profit, sustained or incurred in connection with any product or caused by product defect or the partial or total failure of any product regardless of the form of action, weather in contract, tort

(including negligence), strict liability or otherwise, and weather or not such damage was foreseen or unforeseen.

Warranty is void if the product is misused, damaged, modified in any way, or for unauthorized repairs or parts. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Customer Support

Mega Lite has a customer support line to provide set up help and to answer any question should you encounter a problem. Please visit our website for any other related technical documents. For service related issue please contact our service dept.

Monday—Friday 9am to 6pm CST

Voice: 210 684 2600

E mail: [email protected]

Manual Version

Please Visit www.mega.lighting

for the most up to date manual version

Document

Version

1.1

Date

12/15/2018

Fixture Software

V1.1

Notes

Mega

-

Lite

18668 Highway 16N

Helotes, Texas 78023

Ph 210

-

684

-

2600 Fax 210

-

855

-

6279 www.mega.lighting / [email protected]