Canon EOS 550D, EOS REBEL T2I Instruction manual

Canon EOS 550D, EOS REBEL T2I Instruction manual

m

0

CaHOH

m

B iI w

Customizing the

You can customize various camera features to suit your picture-taking preferences.

You can do it with Custom

Functions. Custom Functions can be set and used only in Creative Zone modes.

Setting Custom Functions _

_ Select [Custom Functions

(C.Fn)].

_ Under the [_] tab, select [Custom

Functions (C.Fn)], then press <_>.

Custom Function No.

_2,

Select the Custom Function No.

_ Press the <_ > key to select the

Custom Function No., then press

Change the setting as desired.

_ Press the <AV> key to select the setting (number), then press <_E_>

_ Repeat steps 2 and 3 if you want to set other Custom Functions.

_ At the bottom of the screen, the current Custom Function settings are indicated below the respective function numbers.

, Exit the setting.

® Press the <MENU> button.

#** The screen for step 1 will reappear.

Clearing

A[[ Custom Functions

On the [_'_ Clear settings] menu, select [Clear a[I Custom Func.

(C.Fn)] to clear aii the Custom Function settings (F144).

19O

Setting Custom Functions*

Custom

Functions

C.Fn

I: Exposure

1 Exposure level increments

2 ISO expansion p.192

3 Flash sync, speed in Av mode

* The C,Fn I -1 setting will also be applied to movie shooting.

_ LV shooting

O

O

O

C.Fn

I1: Image

4 Long exposure noise reduction

6

5 High ISO speed noise reduction

Highlight tone priority p.193

p.194

O

O

O

C.Fn

II1: AutofocuslDdve

I 7 AF-assist beam firing

I 8 Mirror Iockup

C.Fn

IV: OperationlOthers

9 ShuttedAE lock button

10 Assign SET button

11 LCD display when power ON

12 Add image verification data p.195

p.196

p.197

O

O

"The Shaded Custom Functions do not Work during Live view (LV) Shooting.

(Settings are disab!ed,)

191

Custom Function Settings _

Custom Functions are organized into four groups based on the function type: C.Fn

[: Exposure,

IV: OperationlOthers.

C.Fn

[[: Image, C.Fn

Ill: AutofocusfDdve, C.Fn

C,Fn [: Exposure

0: lt3ostop

1: lt2ostop

Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. Effective when you prefer to control the exposure in less fine increments than 1/3-stop increments.

_The exposure level Will be displayed in the Viewfinder and On the LCD monitor as shown below.

0: Off

1: On

For the [SO speed, "H" (equivalent to BSO 12800) wil! be setectable.

However, if [C.Fn-6: HighBight tone priority] is set to [1: Enable], "H" cannot be seL

0: Auto

The flash sync speed is set automatically within a range of 1/200 sec. to

30 see. to suit the scene's brightness.

1:11200o1160 sec. auto

When flash is used with aperture-priority AE (Av), this prevents a slow flash-sync speed from being set automatically in low-light conditions.

It is effective for preventing subject blur and camera shake.

However, while the subject will be properly exposed with the flash, the background will come out dark.

2:1t200 sec. (fixed)

The flash°sync speed is fixed to 1/200 sec. This more effectively prevents subject blur and camera shake than with setting 1. However, the background may come out darker than with setting 1.

192

Custom Function Settings*

_L_ When i or 2 iS set high:speed Sync Cannot be uSed With art externai Speediite

C,Fn ll: Image

0: Off

1: Auto

For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected.

This [Auto] setting is effective in most cases.

2: On

Noise reduction is performed for all exposures of 1 sec. or longer.

The

[On] setting may be effective for noise that cannot be detected or reduced with the [Auto] setting.

@ W th setting i and 2, aftei the p cture iS iaken, the nO Se redUct On propess may take the same amount of time as the exposure.

You cannot take another picture unti! the n0ise reduction process is completed.

® At ISQ 1600 and higher, noise might be more pronounced with setting 2 than with setting 0 0r 11

® With setting 2, if a Io0g exposure is shot during Live View dispiay, '!BUSY" will b# displayed during the noise reduction process. The L!ve View display w!H not appear until the noise reduction is completed. (You cannot take another picture.)

Reduces the noise generated in the image.

Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds.

At low ISO speeds, the noise in the shadow areas is further reduce& Change the setting to suit the noise level.

0: Standard

1: Low

2: Strong

3: Disable

With Setting 2, the maximum burst for continuous sh00iing will greatly decrease.

193

Custom Function Settings*

0: Disable

1: Enable

Improves the highlight detail The dynamic range is expanded from the standard 18% gray to bright highlights.

The gradation between the grays and higMighte becomes smoother.

_ With setting 1, the [Disable] settin£ automatically laKes effect for the

Auto Lighting Optimizer U:.103) and it cannot be changed.

With setting 1, noise may eecome shghtiy more pronounced tiqan usual.

With sett qg 1, the settable ISO speed range will be 200 6480.

Also. the <De-> icon wili be displayed on the LCD monitor and in the viewfinder when highlight tone priority is enabled.

CoFn Ill: AutofocuslDrive

The AF-assist beam can be emitted by the camera's built-in flash or by an external,

O: EnabJe

EOS-dedieated Speediite.

1: Disable

The AF-assist beam is not emitted.

2: Enable

external

flash only

If an external, EOS-dedicated Speedlite is attached, it wil! emit the AFassist beam when necessary.

The camera's built-in flash will not fire the

AF-assist beam.

3: IR AF assist beam only

Among EOS=dedicated Speedlites, only those which have an infrared

AF-assist beam will be able to emit the beam.

This prevents any

Speedlite which uses a series of smal! flashes (like the built=in flash) from firing the AF=assist beam=

If the externa !, EOS_dedieated speed!ite!s

[AF-ass!st

beam firing] Custom

Function is set to [Disabled], the Speedlite w!!l not emit the AF-ass!st

bea m even if the camerals 0.Fn-7-0t2/3 is set,

194

Custom Function Settings*

0: Disable

1: Enable

Prevents camera vibrations caused by the reflex mirror action which can disturb shooting with super telephoto lenses or close-up (macro) shooting.

See page 106 for the mirror Iockup procedure.

C,Fn IV: Operation/Others

0: AF/AE Book

1: AE moeklAF

Convenient when you want to focus and meter separately.

Press the

<-_(_> button to autofocus, and press the shutter button halfway to appby

AE lock.

2: AFtAF mock, no AE Book

Bnthe AI Servo AF mode, you can press the <-)(_ > button to stop the AF operation momentari}y.

This prevents the AF from being thrown off by any obstacle passing between the camera and subject.

The exposure is set at the moment the picture is taken.

3: AE/AF, no AE Boek

This is useful for subjects which keep moving and stopping repeatedly.

Bnthe AI Servo AF mode, you can press the <_> button to start or stop the AI Servo AF operation.

The exposure is set at the moment the picture is taken.

Thus, the optimum focusing and exposure will always be achieved as you wait for the decisive moment.

When 1 or 3 is set, pressing the Remote Switch (p1205) halfl_vay Will not work.

195

Custom Function Settings*

You can assign a frequently-used function to <8>.

camera is shootingoready.

Press <8> when the

O: Normal (disabled)

1: linage quality

Press <_> to display the image-recording

LCD monitor.

quality

Press the < _;_ > key to select the image-recording

<:_>.

setting quality, screen on the then press

2: Flash exposure compensation

When you press <8>, the flash exposure compensation setting screen will appear.

3: LCD monitor On/Off

Assigns the same function as the <D[SR> button.

4: Menu display

Assigns the same function as the <MENU> buttom

5: ISO speed

Assigns the same function as the <[SO> button.

O: Display on

When the power switch is turned on, the shooting settings wil! be displayed (p_44).

1: Previous display status

If you pressed the <D[SR> button and turned off the camera while the

LCD monitor was off, the shooting settings will not be displayed when you turn on the camera again.

This helps to save battery power.

The menu screens and image playback will stitl be displayed when used.

If you pressed the <DISR> button and turned off the camera while the

LCD monitor was on, the shooting settings will be displayed when you turn on the camera again.

196

Custom Function Settings*

0: Disable

1: Enable

Data for verifying whether the image is original or not is appended to the image automatically.

When the shooting information of an image appended with the verification data is dispbayed (p.173), the <_> icon will appear.

To verify whether the image is original, the Original Data Security Kit

OSK-E3 (sold separately) is required.

The images are not Compatibl e with the image encryptiontdecryption features of Origina! Data Security Kit OSK-E3,

......

197

Registering

My Menu*

Under the My Menu tab, you can register up to six menu options and

Custom Functions whose settings you change frequently.

"/ Select [My Menu settings].

® Under the [_] tab, select [My Menu settings], then press <_>.

_ Select

[Register

to My Menu].

® Select [Register to My Menu], then press <_>.

3

Register the desired items.

® Select the item to be registered, then press <_>.

® On the confirmation dialog, select

[OK] and press <_> to register the

item.

® You can register up to six items in My

Menu.

® To return to the screen in step 2, press the <MENU> button.

About

My Menu

settings

® Sort

You can change the order of the registered items in My Menu. Select

[Sort] and select the item whose order you want to change. Then press <_>.

With [_] displayed, press the <AY> key to change the order, then press <_>.

® DeJete item/items and Delete alJ items

You can delete any of the registered items. [Delete itemlitems] deletes one item at a time, and [Delete all items] deletes all items.

® DispJay from My Menu

When [Enable] is set, the [_] tab will be displayed first when you display the menu screen.

198

Setting Copyright

Information

_"

When you set the copyright information, it will be appended to the image as Exif information.

Semect [Copyright information].

_ Under the [9_] tab, select [Copyright information], then press <_>.

_i_2,,_,_,_, option.

_ Press the < AV > key to select either

[Enter author's name] or [Enter copyright details], then press <_>.

_ The text entry screen will appear.

_ Select [DispJay copyright infoo] to check the copyright information currently set.

_ Select [DeJete copyright information] to delete the copyright information currently set.

,_ Enter text.

®_ Refer to "Text Entry Procedure" on the next page and enter the copynght information.

_ Enter up to 63 alphanumeric characters and symbols.

_,_ Exit the setting.

_ After entering the text, press the

<MENU> button to exit.

199

Setting Copyright Information*

Text Entry Proceeure

_ Changing the entry area

Press the <[_ > button to toggle between the top and bottom entry areas.

®_ Moving the cursor

Press the <_> key to move the

CUrSOr.

_ Entering text

In the bottom area, press the < ,;_ > key to select a character, then press <_> to enter it.

_ DeJeting a character

Press the <_> button to delete a character.

_ Exiting

After completing the text entry, press the <MENU> button to return to the screen in step 2.

_ Canceling the text entry

To cancel the text entry, press the <D[SR> button to return to the screen in step 2.

You _an also enter the Copyright information with EOS utility (provided sofbNare),

2OO

This chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to took up needed information.

When Autofocus Fails

Autofocus can fail to achieve focus (the focus confirmation light <O > blinks) with certain subjects such as the following:

Subjects

difficuJt to focus

® Very low-contrast subjects

(Example: Blue sky, solid-color walls, etc.)

® Subjects in very low light

® Extremely backlit or reflective subjects

(Example: Car with a highly reflective body, etc.)

® Near and far subjects covered by an AF point

(Example: Animal in a cage, etc.)

® Repetitive patterns

(Example: Skyscraper windows, computer keyboards, etc.)

In such cases, do one of the following:

(1) With One-Shot AF, focus an object at the same distance as the subject and lock the focus before recomposing (p.48).

(2) Set the lens focus mode switch to <MF> and focus manually.

_ If an Extender (sold Separately)is attached and the maximum aperture Of the lens is f/5_6 or sma!ier (large[ f/number), AE w!l! not be possible

202

_ For situations where AF can fail to achieve focus with Live mode/_ Live mode AF, see page 1171

Using a Household Power Outlet

With the AC Adapter Kit ACK=E8 (sold separately), you can connect the camera to a household power outlet and not worry about the battery level.

Connect

the

power cord.

_ Connect the power cord as shown in the illustration.

_ After using the camera, unplug the power plug from the power outlet.

_ onnect the DC Coupler.

_ Connect the cord's plug to the DC

Coupler.

_:_.,_, the DC Coupler.

_ Open the cover and insert the DC

Coupler until it locks in place.

_:.

Push in the DC cord.

_ Open the DC cord hole cover and install the cord as shown.

_ Close the cover.

@ DO riot connect or disconnect the power C0rd while the camerals power switch is set to <ON>.

203

Remote ControJ Shooting

Remote

ControJJer

RC,6

{Sold

separateJy)

This remote controller enables you to take pictures wirelessly up to about 5 meters/16.4

feet from the camera. You can either shoot

immediately or use a 2=sec. delay.

Remote control

® Set the self=timer to < _® > (p.71).

® Point the remote controller toward the camera's remote control sensor and press the transmit button.

_ The camera will autofocus.

_y,,When focus is achieved, the self=timer lamp will light and the picture will be taken.

_ camera miseperation maYOCcurnear certain types ef fluoresceni iightS

The remote COntrollerRC-ilRC:5 (sold Separately) can also be

USed.

2O4

Remote Control Shooting

Remote Switch RS_60E3 (Sold Separately}

This remote switch has a 60 cm/2,0 feet cord and enables you to press the shutter button halfway or completely, It connects to the camera's remote control terminal,

Using the Eyepiece Cover if you take a picture without looking at the viewfinder, light entering the

eyepiece can throw off the exposure, To prevent this, use the eyepiece cover (p,23) attached to the camera strap,

During Live View shooting and movie shooting, attaching the eyepiece cover is unnecessary.

Remove the eyecup.

_ Push the bottom of the eyecup upward,

_ ttach the eyepiece cover.

_ Slide the eyepiece cover down into the eyepiece groove to attach it,

205

E×temal SpeedJites

EOS-dedicated, EX=series

8peediites

Basically operates like a built-in flash for easy operation,

When an EX=sedes SpeedHte (sold separately) is attached to the camera, almost all the autoflash control is done by the camera, in other words, it is like a high=output flash attached externally in place of the built=in flash,

For detailed instructions, see the EX-series Speed[ite's instruction manual, TMs camera is a Type=A camera that can use all the features of EXosedes Speedlites=

Shoe-mount Speedlites Macro Lites

206

_ W th an EX-series Speed [e not compatible with flash function settLngs

(p.147), only [[=lash exp. comp] and [E=TTL [1 meter,] can be se_for

[External flash rune. setting].

(Certain EX-serles Speed[ites alsc enable [Shutter sync.] to be set.)

Ufflash exposure compensation is set with the ex[ernal Speediite, the flash exposure compensation {con dlsDayed on the camera's LCD monitor wd[ change from [_ to 3%

_, If the flash metering mode is set to TTL autoflash with the Speedlite's

Custom Function, the flash will fire at full outpu_ only.

External Speedfites

Canon

$peediites other than the EX=serieS

® With an EZJEtEGIMLITL=sedes SpeedJite set in TTL or AoTTL autoflash mode, the flash can be fired at fuji output only.

Set the camera's shooting mode to <M> (manual exposure) or

< Av > (aperture-priority AE) and adjust the aperture setting before shooting.

® When using a Speedlite which has manual flash mode, shoot in the manual flash mode.

Using Non=Canon FJash Units

Syne Speed

The camera can synchronize with compact, non=Canon flash units at

11200 sec. or slower. Be sure to test the flash unit beforehand to make sure it synchronizes properly with the camera.

Cautions for Live View shooting

A non-Canon flash wiii not fire during Live View shooting.

_[_ ,_ if ihe camera iS uSed with a flash unit or flash accessory dedicated i0 another Camera brand, the Camera may no t Operate properly and ma!functjon

may resu!t.

@ Do not attach a Mgh-voJtage flash unit on the camera's hot shoe. ntmight not fire.

2O7

Using Eye-Fi Cards

With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a personal computer or upload them to an online service via a wireless LAN.

The image transfer is a function of the Eye-Fi car& To set up, use the card and to troubleshoot any image transfer problems, refer to the Eye-

Fi card's instruction manual or inquire the card's manufacturer.

This product is not guaranteed to support Eye°Fi card functions (including wireJess transfer).

In case of an issue with an EyeoFi card, pJease check with the card manufacturer°

Also note that an approval is required to use Eye-Fi cards in many countries or regions.

Without approval, use of the card is not permitted.

If it is uncJear whether the card has been approved for use in the area, please check with the card manufacturer.

_

insert

an _=yeoFi card.

(p.31)

2

Select [EyeoFi settings].

_ Under the [_'] tab, select [Eye°Fi settings], then press <_>.

_ This menu is displayed only when an

Eye-Fi card has been loaded in the camera.

_ nabme the EyeoFi transmission.

_ Press <_>, set [Eye°Fi trans.] to

[EnabJe], then press <_>.

_ If you set [Disable], automatic transmission will not occur even with the Eye-Fi card loaded (Transmission status icon ,'_F_).

_ isplay the connection

information.

_ Select [Connection info.], then press

2O8

Using Eye-Fi Cards

Check the [Access

point SSID:].

® Check that an access point is displayed for [Access point SSID:].

® You can also check the Eye=Fi card's

MAC address and firmware version.

® Press the <MENU> button three times to exit the menu.

Transmission status icon

_9 Take the picture.

_y,,The picture is transferred and the

<_> icon switches from gray (Not connected) to the icons below.

® For transferred images, _ is displayed in the detailed information display (p.58).

?d" (Gray) Not connected " No connection with access point.

_" (Blinking) Connecting " Connecting with access point.

_" (Displayed) Connected : Connection to access point established.

_" ( t ) Transferring " Image transmission to access point in progress.

Cautions for Using Eye-Fi Cards

If "_" is displayed, an error occurred while retrieving me cara information.

Turn the camera off and on again.

Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal. _n hospitals, a_rports, and other places where w_reless _ransmlsslons are

Prohibited. remove the Eye-Fi card from the camera.

If the image transfer does not work. check the Eye-Fi card and personal computer settings.

For details, see the card's {ns-crucuon manua_

Depending on the w_reless LAN's connection conditions, the image transfer may take Jonger or m_ght be _nterrup_ea.

Because of the transmission function, the Eye-Fi card may uecome no[.

The battery power will be consumed faster.

During the image transfer, auto Dower off will not take effect.

209

Function Availability Table according to Shooting Modes

0: Set automatically ©: User selectaNe _ : Not selectaNe

JPEG

RAW

RAW+ _IL

_.

8 Auto

Manual

Standard

Portrait

_£ Landscape

,_ Neutral

0 0 0 0 0 0

000000000000

000000000000

@@@@@@@@OOOOO

:::::::

@@'@@@000000

:::

'1_''000000

!!!!!!!

''''''100000

!!!!!!

.......

@@@@@@@@OOOOO

!!!!!!!

......

I

!!!!!!!

I I I I I

I

Av

0 0 0 0 0 0

I

00000

000000

00000

000000

00000

00000

00000

O O O O O

0 0 0 0 0

0

0

0

Faithful

Monochrome

UserDefined

Auto WB

Preset WB _

Custom WB

WB correction

_J WB bracketing

Auto Lighting Optimizer @ @ @ @ @ @ @ @ O O O O O

Peripheral illumination correstion 0 0 0 0 0 0 0 0 0 0 0 0 0

One-Shot

@ @ @ @ @ @ @ @ 0 0 0 0

' @ @ @ @ O O O O

0

@

AP

AlServo !

!

!

!

@ O O O O

AIFocus

AF point

/

Auto selection Manual

AF-assistbeam

@ @

@ @ @ @ @ @ @ @ O O O O @

@

'

@ @

' I

@

@

@

0

O

O

0

O

O

0

O

O

0

O

O O

I

!

Stills

O

0

0

0

0

0

O *_

0

0

0

0

0

0

0

@

@

O

O

210

Function Availability Table according to Shooting Modes

Evaluative

Partial e,_ Spot

Center-weighted average

Program shift

[11 Exposure compensation

AEB

AEIocR

@ @ @ @ @ @ @ @ O O O O

i

.......

i i i i i i

O O O O

!

!

!

!

!

!

!

I

'

,

I

I

,

I

I

,

I

I

I

I

I

I

I

I

I

I

0*2

0 0 0 0

0

O

0 *3 O O i

O i

,

!

,

!

,

!

I

!

I

!

I

!

I

!

O

O O O

0 0 0 0 I I I I I I I

@ @

@

@ @

I @

@ 0 0 0 0 0

0

SingLe

Continuous

& Self-tlmer/

Sd4imer:2sec

0 0 0 0 0 0 0 0 0 0 0 0

i i i i i i i

.......

O O O O

Self-time_C0ntinu0usO O O O O O O O O O O O

Auto @ @ @ @ O i

O

0

O

O

O

O

0

O

0

0 i

0 *4

0 *4

Stills

0*5

Manual

Flash off

,

Red-eye reduction O

FEIock ,

@

,

,

O

,

I

@

I

O

I

I I

@

I

O

I

O

0 I I I

O O O O

I

O

Aash exposure compensation sRGB

_ O Adobe RGB

I I I 0*3 O O O O

@ @ @ @ @ @ @ @ O O O O

I I I I 0

O

O

@

@

Live Viewsheothg 0 0 0 0 0 0 0 0 0 0 0 0 0

"1 : For manual exposure only.

*2: Refers to "(2) Bhrring/sharpening the background" function on page 56,

*3: Refers to "(3) Adiusting the picture brightness" function on page 56,

*4: For autoexposure only.

*5: On the movie shooting mode menu, [Remote control] can be set.

0

211

Menu

Settings

t_" Shooting 1 (Red)

Quality

_LI_LI,_I,_I_SI_SI_+_L/

Enable / Disable

Beep

Release shutter without card

_mage review

Peripheral illumination correction

i

i:

Red-eye reduction

i

Enable / Disable

Off / 2 sec. / 4 sec, / 8 sec, / Hold

Enable / Disable

Disable / Enable

Flash firing / Built-in flash function setting /

External flash function setting / External flash

C,Fn setting / Clear external flash C.Fn setting

t_ = Shooting 2 (Red)

1/3-stop increments, +_5stops (AEB: +_2stops)

Disable / Low / Standard / Strong

E_3/ Ec3 / Eo3/ E3

Manual setting of white balance

WB correction: White balance correction

WB-BKT: White balance bracketing sRGB / Adobe RGB

_Standard

_Neatral

_User

/ _6 Portrait / _Landscape

t _:_ Faithful / _Monochrome

Def. !, 2, 3

Page

72

138

138

138

104

65

147

89

t t

103

86

99

101

102

96

75

91

94

212

The [_=] shooting 2, [_] Sh_0ting 3, [_] set:up 3: and [_} My Menu screens (tabs) are net displayed in Basic Zone modes.

_ Shaded menu options are not displayed in Basic Zone modes.

Menu Settings

t_

Shooting 3 (Red)

Obtains data to be used to erase dust spots

Page

151

................................................................................................................

63

Max. 6400

B"

Playback

1 (Blue)

Protect images

Rotate

Erase images

Print order

Slide show

Erase=protect images

Rotate vertical images

Erase images

Specify images to be printed (DPOF)

Select the images and set the Display time and

Repeat settings for automatic playback

170

159

171

185

165

B: Playback

Histogram

2 (Blue)

174 image jump w/_

Ctrl over HDM_

Brightness / RGB

1 image / !0 images / 100 images / Date /

Movies / Stills

Disable / Enable

157

168

_" Set-up 1 (Yellow)

Auto

Format

Screen power

Auto rotate

File numbering

LCD auto off cotar off

30 sec. / 1 min. / 2 min, / 4 min. / 8 min. /

15 min. / Off

On_ _ / On_ / Off

InitiaWize and erase data in the card

Continuous / Auto reset / Manual reset

Enable / Disable

Select the background color

Eye=Fi transmission: Disable / Enable

Connection information Eye-Fi settings*

Displayed only when an Eye=Fi card is used.

139

142

42

140

146

146

208

213

Menu Settings

@' Set-up 2 (Yellow)

LCD brightness

DatelTime

Language_

Video system

Sensor cleaning

Live View function settings

@_Set-up 3 (Yellow)

Seven brightness levels provided

Set the date (year, month, day) and time (hour, min.

see.)

Select the interface language

NTSC / PAL

Auto cleaning: Enable / Disable

Clean now

Page

139

29

30

169

150

Live View shooting / Grid display / Metering timer / AF mode

15s

108

Customize camera functions as desired 190

_i_wate Vet.

My Menu (Green)

Display copyright information / Enter author's name / Enter copyright details / Delete copyright information

Clear all camera settings / Clear awlCustom

Func. (C.Fn)

For updating the firmware menu items and

199

144

198

214

Menu Settings

Movie Shooting Mode Menu

'_" Movie 1 (Red)

Movie recording size

AF mode

AF during _

%_,Shutter/AE lock button

Remote control

1920x1080 (_0 / [_s / _4)/

1280x720 (_0 / _0)t

640x480 (1_0 / _0) /

Crop 640x480 (1_0 / _0)

Live mode / "L_Live mode / Quick mode

Disable/Enable

AF/AE lock t AE !ock/AF /

AF/AF lock, no AE lock /

AE/AF, no AE lock

Disable / Enable

Page

131

132

132

133

133

',_,: Movie 2 (Red)

Movie

Grid exposure disptay

Metering timer

Auto / Manual

Off / Grid 1 _ / Grid 2_

4 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. / 30 min.

Sound recording On / Off

_ Highlight tone priority*

Disable / Enable

Displayed only when [Movie exposure] is set to [Manual].

134

134

134

134

134

About the menu screen

in movie

shooting mode

The [',_,°] Movie 1 and [_,_,:] Movie 2 screens (tabs) are displayed only in

[ne movie shooting moae.

The [_] Shooting 3, [9_] Set-up 3, and [_r ] My Menu screens i_abs_ wi got be aJsplayea.

Under the [_:] tab, the [Expo.

compJAEB] option wlh become

[Exposure comp.].

The following menu ttems will not be displayed:

- [_=]: Red-eye reouc[Ion Flash contro

, [_:]: Metering mode. WB Shift!BKT.

Color space

• [@°]: LCD auto off. Screen color

- [@:]: Sensor cleaning, Live View function settings

215

System Map

S%E2 270EX

_

430EX It

_,

580EX II it

Macro Ring Lite

MR-14EX

Macro Twin Lite

M%24EX

Eyepiece Extender

EP-FX15It

Rubber Frame Ef

£

E-series DioptHc

Adjustment Lenses

Bundted

Accessories

Wide Strap

EW-100DB III

Eyecup Ef

Angle Finder C

AC Adaoter Kit

ACK-E8

Bakery Pack

LP-E/

Battery' Charger

LC-E8 or LC-E8E

Battery Grip

BG-E8

216

Battery Magazine

BGM-E8L for two

LP-E8 battery packs

Battery Magazine

BGM-E8A for

Size-AAJLR6 batteries

Compact Power

Adapter

CA-PS700

System Map

Remote

Controller

RC-6

Remote Switch

RS-6OE3

,,,,_,

,,_,_,_,_ ,_ _,

AVG-DC400ST

: : £0S D_GITAL 8oftwa_ Instrudio

_

HDMI CabJe

HTC_IO0

lenses

EF-S lenses

TVNideo

SO memory card/

SDHC memory

card/

SDXC memory card

PCMCIA adapter

217

Troubleshooting Guide

If a problem occurs, first refer to this Troubleshooting Guide.

If tMs

Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center.

The battery

cannot

be recharged with the battery

charger provided.

® Do not recharge any battery pack other than a genuine Canon Battery

Pack LP-E8.

The camera setto <ON>.

does not operate even when the power

¢_ The battery is not properly installed in the camera (F26),

_ Recharge the battery (p.24),

_ Make sure the battery compartment cover is closed (p.26),

® Make sure the card slot cover is closed (p,31),

_; Press the <D[SR> button (pA4).

sw!tch

!s

The battery charger's lamp blinks.

® if there is a problem with the battery charger, the protective circuit will stop the charging operation and the charge lamp will blink in orange, if this happens, disconnect the charger's power plug from the power outlet and remove the battery pack.

Attach the battery pack to the charger again and wait a while before connecting the charger to a power outlet again.

The access lamp still blinks even when the power switch is

set to <OFF>.

® If the power is cut off while an image is being recorded to the card, the access lamp will still continue to light/blink for a few seconds.

When the image recording is completed, the power will turn off automatically.

218

Troubleshooting Guide

The

battery

becomes

exhausted quickiyo

® Use a fully=charged battery pack (p.24)_

® The rechargeable battery pack performance will degrade over repeated use. Purchase a new one.

® If you use Live View shooting or shoot movies for a prolonged period

(p.107, 123), the number of possible shots will decrease.

The camera turns off by itseifo

® Auto power off is in effecL if you do not want auto power off to take effect, set [_ Auto power oft] to [Oft].

® Even if [_ Auto power off] has been set to [Oft], the LCD monitor will still turn off after the camera is idle for 30 min.

Press the <DtSR> button to turn on the LCD monitor.

No images can be shot nor recorded.

® The card is not properly

inserted

(p.31).

® Bfthe card is full, replace the card or delete unnecessary images to make room (p.31,171).

® Bfyou try to focus in One=Shot AF mode while the focus confirmation light < O > in the viewfinder blinks, a picture cannot be taken.

Press the shutter button halfway again to focus, or focus manually (p.37, 69).

_ Slide the card's write-protect switch to the Write/Erase setting (p.31).

The

image is out o1' focus_

® Set the lens focus mode switch to <AF> (p.33).

® To prevent camera shake, press the shutter button gently (p.36, 37).

® If the lens has an Image Stabilizer, set the IS switch to < ON>.

219

Troubleshooting Guide

The card

cannot

be used.

® If a card error message is displayed, see page 42 or 224.

The

maximum burst during continuous shooting is lower.

® Set the [9: Custom Functions (C.Fn)] menu's [High _SO speed noise reduction] to [Standard], [Low], or [Disable].

If it is set to

[Strong], the maximum burst during continuous shooting will greatly decrease (p.193).

® if you shoot something that has fine detail (field of grass, etc.), the file size will be larger and the actual maximum burst might be lower than the number mentioned on page 72.

ISO 100 cannot be set.

® Under the [9: Custom Functions (C.Fn)] menu, if [Highlight tone priority] is set to [Enable], BSO 100 cannot be set. When [HighJight tone priority] is set to [Disable], BSO 100 can be set (p_194)_ This also applies to movie shooting (p.134).

The

Auto Lighting Optimizer cannot be set.

® Under the [9: Custom Functions (C.Fn)] menu, if [HigHight tone priority] is set to [Enable], the Auto Lighting Optimizer cannot be set.

When [HigHight tone priority] is set to [Disable], then the Auto

Lighting Optimizer can be set (p.194).

This also applies to movie shooting (p.134).

When I use the <AM> mode with flashl the shutter speed becomes

slow.

® If you shoot at night when the background is dark, the shutter speed becomes slow automatically (slow-sync shooting) so that both the subject and background are propedy exposed.

If you do not want a slow shutter speed to be set, set the [9_ Custom Functions menu's [Flash sync.

speed in Av mode] to 1 or 2 (p_192).

(C.Fn)]

22O

Troubleshooting Guide

The built=in

flash

does not fire.

® If you shoot continuously with the built=in flash at short intervals, the flash might stop operating to protect the flash unit.

The

camera makes a noise when it is shaken.

® The built=in flash's pop=up mechanism moves slightly.

This is normal

® If you use flash, the shutter will make two sounds each time you shoot

(p.109).

The movie shooting terminates by itseJf.

® if the card's writing speed is slow, movie shooting may stop automatically.

Use an SD Speed Class 6 "[email protected]" or faster card.

To find out the card's read/write speed, see the card manufacturer's Web site, etc.

® Bfthe movie file size reaches 4 GB or if the movie recording time reaches 29 rain. 59 sec., movie shooting wil_ stop automatically.

When a movie

is played,

camera operation noise can be

heard.

® If you operate the camera's dials or lens during movie shooting, the respective operation noise will also be recorded.

Using an externa} microphone (commercially available) is recommended (p.135).

221

Troubleshooting Guide

The LCD monitor does not display a clear image.

® if the LCD monitor is dirty, use a soft cloth to clean it.

® In low or high temperatures, the LCD monitor display may seem slow or might look Mack.

It will return to normal at room temperature.

The

menu screen shows few tabs and options[

® in Basic Zone modes and in movie shooting mode, certain tabs and menu options are not displayed.

Set the shooting mode to a Creative

Zone mode (p.40).

The image cannot be erased.

® If the image has been protected, it cannot be erased (p.170).

The file

name's first character is an underscore ("_MGZ"}_

® Set the color space to sRGB.

If Adobe RGB is set, the first character wild be an underscore (p.96).

The file numbering does not start from

0001:

® if you use a card which already has images recorded, the file numbering might start from the last image in the card (p.140).

222

Troubleshooting Guide

The shooting date and time displayed is incorrect.

® The correct date and time has not been set (p.29).

No image appears on the TV screenl

® Make sure the A'v" came or HDMI cable's plug is inserted all the way in

(p.167, 169).

® Set the video OUT system (NTSC/PAL) to the same video system as the TV set (p.214).

_; Use the AM cable that came with the camera (p.169).

The card reader does not detect the card.

® Depending on the card reader and computer OS used, SDXC cards might not be correctly detected, in such a case, connect your camera and computer with the provided interface cable, and transfer the images to your computer using EOS Utility (provided software).

The [Eye-Fi Settings] menu item does not appear.

® [EyeoFi Settings] wil! only appear when the Eye-Fi card is inserted in the camera.

Bfthe EyeoFi card has a write-protect tab, you wil! not be able to check the card's connection status, or disable Eye-Fi card transmission when the tab is in the locked position.

There are fewer pr!at!ng

effects than listed !n the instruction manual_

® What is displayed on the screen differs depending on the printer.

This instruction manual lists all the printing effects available (p.180).

223

Error Codes

Error No.

If there is a problem with the camera, an error message will appear. Follow the onscreen instructions.

Countermeasures

0!

02

04

05

Communications lens contacts.

between the camera and lens is faulty.

Clean the

,,,;_,

on the camera and lens and use a

Canon lens (p.!3, 16).

Card cannot be accessed.

Reinsert/change with camera.

card or format card

,,,;_,

and insert the card again, replace the card, or format the card (p.31,42).

Cannot save images because card is fu& Reptace card.

,,,;_,

images, or format the card

(p.31, !71, 42).

The built4n flash could not be raised.

Turn the camera off and on again.

06

Sensor cleaning is not possible.

Turn the camera off and on again.

10, 20, Shooting is not possible due to an error.

Turn the camera off and

30, 40, on again or re-install the battery.

50, 60,

,,,;_,

pack

70, 80 again, or use a Canon lens (p.27, 26)

* _fthe error still persists, write down the error No. and contact your nearest

Canon Service Center.

224

Specifications

, Type

Type:

Recording media:

Image sensor size:

Compatible lenses:

Digital , singleqens reflex, AF/AE camera with built-in flash

SD memory card, SDHC memory card, SDXC memory card

22.3 x 14.9 mm

Canon EF lenses (including EF-S lenses)

(35mm-equivalent focal length is approx.

1.6 times the lens focal length)

Canon EF mount Lens mount:

, Image Sensor

Type:

Effective pixels:

Aspect ratio:

Dust delete feature:

, Recording System

Recording format:

Image type:

CMOS sensor

Approx. !8.00

megapixeJs

8:2

Auto, Manual, Dust Delete Data appending

Recorded pixels:

Design rule for Camera File System 2.0

JPEG, RAW (14-bit Canon original)

RAW+JPEG simultaneous recording possible

Large : Approx.

17.90 megapixels (5184 x 3456)

Medium : Approx. 8.00 megapixels (3456 x 2304)

Small

RAW

: Approx. 4.50 megapixels

: Approx. 17.90 megapixels

(2592 x 1728)

(5184 x 3456)

, Image

Processing

Picture Style:

White balance:

Noise reduction:

Automatic image brightness correction:

Highlight tone priority:

Lens peripheral i_umination correction:

Standard, Portrait, Landscape, Neutral, Faithful,

Monochrome, User Def. 1 - 3

Auto, Preset (Daylight, Shade, Cloudy, Tungsten light,

White fluorescent light, Flash), Custom

White balance correction and white balance bracketing features provided

* Color temperature information transmission enabled

Applicable to long exposures and high ISO speed shots

Auto Lighting Optimizer

Provided

Provided

225

Specifications

Viewfinder

Type:

Coverage:

Magnification:

Eye-level pentamirror

Vertical/Horizontal approx.

95%

Approx. 0.87x (-1 m -I with 50mm lens at infinity)

Eye point: Approx.

19 mm (From eyepiece lens center at -1 m -1)

Built-in dioptric adjustment: -3.0 - +1.0 m -1 (dpt)

Focusing screen:

Mirror:

Depth-of-field preview:

Fixed, Precision Matte

Quick-return type

Provided

Autofocus

Type:

AF points:

Metering range:

Focus modes:

AF-assist beam:

TTL secondary

9 AF points

EV-0.5

One-Shot image-registration,

- 18 (at 23°0/73°F, ISO 100) phase detection

AF, AI Servo AF, AI Focus AF, Manual focusing

(MF)

Small series of flashes fired by built-in flash

Exposure ControJ

Metering modes:

Metering range:

Exposure control:

ISO speed:

(Recommended exposure index)

63-zone TTL ful!-aperture metering

• Evaluative metering (linkable to any AF point)

• Partial metering (approx. 9% of viewfinder at center)

• Spot metering (approx. 4% of viewfinder at center)

• Center-weighted average metering

EV 1 - 20 (at 23°0/73°F with EF50mm f/! .4 USM lens,

ISO 100)

Program AE (Full Auto, Portrait, Landscape, Close-up,

Sports, Night Portrait, Flash Off, Creative Auto,

Program), shutter-priority AE, aperture-priority AE, depth-of-field AE, manual exposure

Basic Zone modes: ISO 100 - 3200 set automatically

Creative Zone modes: ISO !00

- 6400 (in whole-stop increments), ISO 100 - 6400

Auto, or ISO speed expanded to

ISO 12800

Exposure compensation: Manual and AEB (Settable in combination with manual exposure compensation)

AE lock:

Settable amount: _+5stops in 1/3- or 1/2-stop increments

Auto: Applied in One-Shot AF mode with evaluative metering when focus is achieved

Manual: By AE lock button

226

Specifications

Shutter

Type:

Shutter speeds:

Electronically-controlled, focal-plane shutter

1/4000 sec. to 1/60 sec. (Full Auto mode), X-sync at 1/200 sec_

1/4000 sec. to 30 sec.

bulb (Total shutter speed range.

Available range varies by shooting mode.)

Flash

Built-in flash:

Retractable, auto pop-up flash

Guide No.: 13/43 (ISO 100, in meters/feet)

Flash coverage: 17mm lens angle of view

Recycling time approx. 3 sec.

External flash: EX-series Speedlite (Flash functions settable with the camera)

Flash metering: E-TTL II autoflash

Flashexposurecompensation:_+2stops in 1/3- or 1/2-stop increments

FE lock: Provided

PC terminal: None

Drive System

Drive mode:

Single shooting, continuous shooting, self4imer with 10sec. or 2-sec.

delay and 10-sec. delay with continuous

Continuous shooting speed:

Max. burst: shooting

Max. approx. 3.7 shots/sec.

JPEG Large/Fine: Approx. 34 shots

RAW: Approx. 6 shots

RAW+JPEG Large/Fine: Approx. 3 shots

* Figures are based on Canon's testing standards (ISO

100 and Standard Picture Style) using a 4GB card.

Live View Shooting

Focusing:

Metering

Metering modes: range:

Grid display:

Live mode, Face detection Live mode (Contrast detection)

Quick mode (Phase-difference detection)

Manual focusing (5x/10x magnification possible)

Evaluative metering with the image sensor

EV 0 - 20 (at 23°0/73°F with EF50mm f/1,4 USM lens,

ISO 100)

Two types

227

Specifications

Movie Shooting

Movie compression:

Audio recording format:

Recording format:

Recording size and frame rate:

File size:

Focusing:

Metering

Metering

Exposure modes: range:

ISO speed: control:

Sound recording:

MPEG-4 AVC/H.264

Variable (average) bit rate

Linear PCM

MOV

1920x1080 (Full HD): 30p/25p/24p

1280x720 (HD)

640x480 (SD)

: 60p/50p

: 60p/50p

Crop 640x480 (SD) : 60p/50p

* 30p: 29.97 fps, 25p: 25.00 fps, 24p: 23,976 fps, 60p:

59.94 fps, 50p: 50.00 fps

1920xl 080 (30p/25p/24p) :Approx.

330 MB/min.

1280x720 (60p/50p) : Approx. 330 MB/min.

640x480 (60p/50p) :Approx.

165 MB/min.

Crop 640x480 (60p/50p) : Approx.

165 MB/min.

Same as focusing with Live View shooting

Center-weighted average and evaluative metering with the image sensor

* Automatically set by the focusing mode

EV 0 - 20 (at 23°0/73°F with EF50mm f/! ,4 USM lens,

ISO 100)

Program AE (exposure compensation possible) for movies and manual exposure

With autoexposure shooting:

Automatically set within ISO 100 - 6400

With manual exposure:

Manually settable within ISO 100 - 6400 (in whole-stop increments), ISO auto

Built-in monaural microphone

External stereo microphone terminal provided

Two types Grid display:

LCD Monitor

Type:

Monitor size and dots:

Coverage:

Brightness adjustment:

Interface language:

TFT color liquid-crystal

&0-in. with approx.

Approx.

25

100%

Manual (7 levels) monitor

1,04 million dots

228

Specifications

image

Playback

Image display formats:

Zoom magnification:

Image browsing methods:

Highlight alert:

Movie playback:

Single image, Single image + Info (Basic info, detailed info, histogram), 4-image index, 9-image index, image rotate possible

Approx.

! .5x- 10x

Single image, jump by 10 or 100 images, by shooting date, by movie, by stills

Overexposed highlights blink

Enabled (LCD monitor, video/audio OUT, HDMI OUT)

Builtqn speaker

Direct Printing

Compatible printers:

Printable images:

Print ordering:

PictB ridge-compatible printers

JPEG and RAW images

DPOF Version 1.1 compatible

Custom Functions

Custom Functions:

My Menu registration:

Copyright information:

12

Provided

Entry and inclusion possible

_nterface

Audio/video OUT/

Digital terminal: Analog video (Compatible with NTSC/PAL)Istereo audio output

For personal computer communication and direct printing

(Hi-Speed USB equivalent)

HDMI mini OUT terminal: Type C (Auto switching of resolution), CEC-compatible

External microphone

IN terminal: 3.5mm dia. stereo mini-iack

Remote control terminal: For Remote Switch RS-60E3

Wireless remote control: Remote Controller RC-6

Power Source

Battery:

Battery life:

(Based on CIPA testing standards)

Battery Pack LP-E8 (Quantity 1)

* AC power can be supplied via AC Adapter Kit ACK-E8

* With Battery Grip BG-E8 attached, size-AA/LR6 batteries can be used

With viewfinder shooting:

Approx. 440 shots at 23°C/73°F, approx. 400 shots at 0°C/32°F

With Live View shooting:

Approx. 180 shots at 23°C/73°F, approx. I50 shots at 0°C/32°F

229

Specifications

Dimensions and Weight

Dimensions (W x H x D): 128.8 x 97.5 x 75.3 mm / 5.1 x 3.8 x 3.0 in.

Weight: Approx. 530 g / !8.7 oz. (ClPA testing standards)

Approx. 475 g 116.8 oz. (body only)

Operation

Environment

Working temperature range: O°C - 4O°C / 32°F - 104°F

Working humidity: 85% or less

* Battery Pack LP-E8

Type:

Rated voltage:

Battery capacity:

RechargeabJe litMamdon battery

7,2 V DC

1120 mAh

Working temperature range: During charging: 6°C - 40°C / 43°F - 104°F

During shooting: 0°C - 40°C / 32°F - 104°F

Working humidity: 85% or less

Dimensions (W x H x D): 37.1 x 15.4 x 55,2 mm i 1.5 x 0.6 x 2.2 in.

Weight: Approx. 52 g / 1.8 oz.

* Battery Charger LCoE8

Compatible battery:

Recharging time:

Rated input:

Rated output:

Battery Pack LP-E8

Approx. 2 hours (at 23°0 / 73°F)

100 - 240 V AC (50/60 Hz)

8.4 V DC / 720mA

Working temperature range: 6°C - 40°C / 43°F - 104°F

Working humidity: 85% or less

Dimensions (W x H x D): 69 x 28 x 87.5 mm / 2.7 x 1,1 x 3,4 in,

Weight: Approx. 82 g / 2.9 oz.

* Battery Charger LCoE8B

Compatible battery:

Recharging time:

Battery Pack LP-E8

Approx. 2 hours (at 23°0 / 73°F)

Rated input:

Rated output:

100 - 240 V AC (50/60 Hz)

8.4 V DC / 720mA

Working temperature range: 6°C - 40°C / 43°F - 104°F

Working humidity: 85% or less

Dimensions (W x H x D): 69 x 28 x 87.5 mm / 2.7 x 1,1 x 3,4 in,

Weight: Approx. 82 g / 2.9 oz.

230

Specifications

EF-SI8-55mm f/3.5o5.6

IS

Angle of view: Diagonal extent: 74020 ' - 27050 '

Horizontal extent: 64030 , - 23020 ,

Vertical extent: 45030 , - 15040 ,

Lens construction:

Minimum aperture:

Closest focusing distance:

Max. magnification:

Field of view:

Image Stabilizer:

Filter size:

Lens cap:

Max. diameter x length:

Weight:

Hood:

Case:

11 elements in 9 groups f/22 - 36

0.25 m 1 0.82 ft. (From image sensor plane)

0.34x (at 55 mm)

207 x 134- 67 x 45 mm/ 8.1 x 5.3 - 2.6 x 1.8 in. (at 0.25 m / 0.82ft.)

Lens shift type

58 mm

E-58

68.5 x 70 mm / 2.7 x 2.8 in,

Approx.

200 g / 7.1 oz.

EW-6OC (sold separately)

LP814 (sold separately)

EF-818-135_

Angle of view: f/3.5o5.6

_S

Diagonal extent: 74020 , = 11°30'

Horizontal extent: 64030 , - 9030 ,

Vertical extent: 45030 , - 6020 ,

Lens construction:

Minimum aperture:

16 elements f/22 - 36 in 12 groups

Closest focusing distance*: At 18mm focal length: 0.49 m / 1.6! ft.

(327 x 503 mm / 12.9 x 19,8 in. field of view)

At !35mm

focal length: 0.45 m / ! .48 ft.

(75 x 112 mm / 3,0 x 4.4 in. field of view)

* Distance from image sensor plane

Max. magnification:

Image Stabilizer:

Filter size:

Lens cap:

Max. diameter x length:

Weight:

Hood:

Case:

0.21x (at 135mm)

Lens shift type

67 mm

E-67U

75.4 x !81 mm / 3.0 x 4.0 in.

Approx.

455 g / 16.0 oz.

EW-73B (sold separately)

LPl116 (sold separately)

® All specifications above are based on Canon's testing standards.

® Product specifications and the exterior are subject to change without notice.

® if a problem occurs with a non-Canon lens attached to the camera, consult the respective lens maker.

231

Trademarks

® Adobe is a trademark of Adobe Systems Incorporated_

® Windows is a trademark or registered trademark of Microsoft Corporation in the

United States and other countries.

® Macintosh and Mac aS are trademarks or registered trademarks of Apple Inc.

in the United States and other countries.

® SDXC logo is a trademark of SD-3C, LLC.

® HDMI, HDMI logo, and High-Definition Multimedia Interface are a trademark or registered trademark of HDMI Licensing LLC.

® All other corporate and product names and trademarks mentioned in this manual are the property of their respective owners.

* This digital camera supports Design rule for Camera File System 2.0 and Exif

2.2!

(also called "Exif Print"). Exif Print is a standard that enhances compatibility between digital cameras and printers.

By connecting the camera to an Exif Print-compliant printer, the shooting information is incorporated to optimize the print output.

About MPEGo4

Licensing

"This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video.

No license is granted or implied for any other use for MPEG-4 standard."

* Notice displayed in English as required.

This product is designed to achieve excellent performance when used with genuine Canon accessories, Canon shall not be !iab!e for any damage to this p[oduct and/or accidents such as fire, etc., caused by the malfunction of nongenuine Canon accessories (e,g,; a !eakage and/or explosion of a battery pack), Please note that this warranty does not apply to repairs arising Out of the malfunction of non:genuine Canon accessories, although you may request such repairs on a chargeable basis.

232

Fol!ow

these safeguards and material damage, and use the equipment properly to prevent injury, death, u

• To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below:

- Do not use any batteries, power sources, booklet.

Do not use any home-made and or modified accessories batteries.

not specified in this

- Do not short-circuit, disassemble, or modify the battery pack or back-up battery.

Do not apply heat or apply solder to the battery pack or back-up battery.

Do not expose the battery pack or back-up battery to fire or water.

And do not subject the battery pack or back-up battery to strong physical shock.

- Do not install the battery pack or back-up battery in reversed polarity (+ -). Do not mix new and old or different types of batteries.

- Do not recharge the battery pack outside the allowable ambient temperature of0°C - 4O°C (32°F - 104°F).

Also, do not exceed the recharging time.

range

- Do not insert any foreign metallic objects into the electrical contacts of the camera, accessories, connecting cables, etc.

• Keep the back-up battery away from children.

If a child swallows the battery, consult a physician immediately.

(Battery chemicals may harm the stomach and intestines.)

• When disposing of a battery pack or back-up battery, insulate the electrical contacts with tape to prevent contact with other metallic objects or batteries.

This is to prevent fire or an explosion.

• If excessive heat, smoke, or fumes are emitted during battery pack recharging, immediately unplug the battery charger from the power outtet to stop the recharging and prevent a fire.

• If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke or fumes, remove it immediately.

Be careful not to get burned in the process.

• Prevent any battery leakage from contacting your eyes, skin, and clothing.

It can cause blindness or skin problems.

If the battery leakage contacts your eyes, skin, or clothing, flush the affected area with lots of clean water without rubbing it. See a physician immediately.

• During the recharging, keep the equipment away from the reach of children.

The cord can accidentally choke the child or give an electrical shock.

• Do not leave any cords near a heat source.

It can deform the cord or melt the insulation and cause a fire or electrical shock.

• Do not fire the flash at someone driving a car. It may cause an accident.

• Do not fire the flash near a person's eyes.

It may impair the person's vision.

When using flash to photograph an infant, keep at least 1 meter away.

• Before storing the camera or accessory when not in use, remove the battery pack and disconnect fire.

the power plug.

This is to prevent electrical shock, heat generation, and

• Do not use the equipment where there is flammable gas. This is to prevent an explosion or fire.

233

If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock.

Do not disassemble electrical shock.

or modify, the equipment.

High-voltage internat parts can cause

Do not took at the sun or an extremely bright light source through the camera or tens.

Doing so may damage your vision.

Keep the camera from the reach of small children.

The neck strap can accidentally choke the child.

Do not store the equipment electrical shock.

in dusty or humid places.

This is to prevent fire and

Before using the camera inside an airplane or hospital, check if it is allowed.

Electromagnetic waves emitted by the camera may interfere with the plane's instruments or the hospital's medical equipment.

• To prevent fire and electrical shock, follow the safeguards below:

- Always insert the power plug all the way in.

- Do not handle a power plug with wet hands.

- When unplugging a power ptug, grasp and putt the plug instead of the cord.

- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord.

Also do not twist or tie the cords.

- Do not connect too many power plugs to the same power outlet.

- Do not use a cord whose insulation has been damaged.

Occasionally unplug the power plug and use a dry cloth to clean off the dust around the power outlet.

If the surrounding is dusty', humid, or oily, the dust on the power outlet may become moist and short-circuit the outlet to cause a fire.

• Do not leave equipment inside a car under the hot sun or near a heat source.

The equipment may become hot and cause skin burns.

• Do not carry the camera around while it is attached to a tripod.

Doing so may cause injury'. Also make sure the tripod is sturdy enough to support the camera and tens.

• Do not leave a tens or lens-attached attached.

Othe_'ise, camera the tens may concentrate under the sun without the sun's the lens rays and cause cap a fire.

• Do not cover or wrap the battery-recharging apparatus with a cloth.

Doing so may trap heat within and cause the casing to deform or catch fire.

• If you drop the camera in water or if water or metal fragments enter inside the camera, promptly remove the battery' pack and back-up battery.

This is to prevent fire and electrical shock.

• Do not use or leave the battery pack or back-up battery in a hot environment.

Doing so may cause battery leakage or a shorter battery' life. The battery pack or back-up battery' can atso become hot and cause skin burns.

• Do not use paint thinner, benzene, or other organic solvents to clean the equipment.

Doing so may cause fire or a health hazard.

if the product does not work properly or requires repair, contact your dealer or your nearest Canon Service Center.

234

Digital Camera Model DS126271 Systems

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (!) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part !5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part

15 of the FCC rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual.

If such changes or modifications should be made, you could be required to stop operation of the equipmenL

Canon U.S.A.

Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516)328-5600

This Class B digital apparatus complies with Canadian ICES-003.

When connecting to and using a household power outlet, use only AC

Adapter Kit ACK-E8 (rated input: 100-240 V AC 50/60 Hz, rated output:

7.4 V DC). Using anything else can cause fire, overheating, or electrical shock.

235

iMPORTANT SAFETY INSTRUCTIONS

1.

SAVE THESE _NSTRUCTIONS -- This manual contains important safety and operating instructions for Battery Charger LC-E8 & LC-E8E

2.

Before using the charger, read all instructions and cautionary remarks on

(1) the charger, (2) the battery pack, and (3) the product using the battery pack

3, CAUTION -- To reduce risk of injury, charge only the Battery Pack LP-E8.

Other types of batteries may burst, causing personal iniury and other damage

4.

Do not expose the charger to rain or snow.

5.

Use of an attachment not recommended or sold by Canon may result in fire, electric shock, or personal injury.

6.

To reduce risk of damage to electric plug and cord, pull by plug rather than by cord when disconnecting charger.

7.

Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

8.

Do not operate the charger with damaged cord or plug - replace them immediately.

9.

Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman.

10. Do not disassemble the charger; take it to a qualified serviceman when service or repair is required.

Incorrect reassembly may result in a risk of electric shock or fire.

1!. To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning.

MAINTENANCE INSTRUCTION

Unless otherwise stated in this manual, there are no user serviceable parts inside. Refer sen,icing to qualified serviceman.

Q

The Lithium ion/polymer battery that powers the product is recyclable.

Please call 1-800-8-BATTERY for information on

USA and Canada only: how to recycle this battery.

For CA, USA only

Included lithium battery contains Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate/for details.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.

236

lnde×

1280x720 ......................................

131

1920x1080 ....................................

131

1st-curtain sync .............................

148

2nd-curtain sync ............................

148

2-sec. self-timer ..............................

71

4- or 9-image index display ........... 156

640x480 ........................................

131

Battery Grip ..................................

216

Beeper ..........................................

138

Black-and-white image ............. 76, 93

Built-in flash ........................

64, 79, 82

Bulb ................................................

84

BULB (Bulb exposure) ....................

84

A/V OUT ................................

160, 169

Access lamp ....................................

32

A-DEP

(Automatic depth-of-field AE) .......... 85

Adobe RGB .....................................

96

AE lock ............................

97, 112, 134

AEB .................................................

89

AF _ Focusing

AI FOCUS (AI Focus AF) ................ 67

AI SERVO (AI Servo AF) ................ 67

AI Servo AF .....................................

67

Aperture-priority AE ........................

80

Audio/video OUT ................... 160, 169

Auto Lighting Optimizer ........... 45, 103

Auto playback --> Slide show

Auto power off .........................

27, 139

Autofocus _ Focusing

Av (Aperture-priority AE) ................. 80

B/W (Monochrome) .........................

76

Basic Zone modes ..........................

20

Battery _ Power

(Creative Auto) .........................

55

Cable ........................

3, 160, 167, 169

Camera

Camera shake ..........................

106

Clear settings ...........................

144

Holding the camera ....................

36

Settings display ........................

143

Camera shake .........................

35 - 37

Card ......................................

2, 13, 31

Card reminder ....................

3!, 138

Eye-Fi .......................................

Format ........................................

208

42

Problem .........................

32, 224

SD speed class ........................

123

SDHCISDXC ................................

2

Center-weighted average metering .........................................

86

Cleaning (image sensor) ..............

150

Clock --> Date/Time

Close-up .........................................

52

Color space ..................................

96

Color temperature ..........................

99

Color tone ....................................

92

Continuous shooting .......................

70

Contrast ..........................................

92

237

Index

Copyright information ....................

!99

Creative Auto ..................................

55

File number

..................................

File size

..........................

Creative Zone modes .....................

20

Filter effect (Monochrome)

.............

Custom Functions .........................

!90

Clear all ....................................

190

Firmware Ver

................................

Flash

..............................................

List ............................................

191

2rid-curtain sync

......................

Built-in flash

...............................

Custom Functions

....................

Date/Time

.......................................

Effective range

...........................

DC coupler

....................................

............

FE lock

.......................................

Flash exposure compensation,,, 88

Flash off

...............................

Menu setting

............................

Direct printing _ Printing

DPOF

............................................

Flash exposure compensation ....... 88

Focus confirmation light

.................

Dust Delete Data

..........................

Focus mode switch..................

Erase (image)

Focusing

...............................

AF mode

............................

Error codes

...................................

AF point selection

......................

Beeper

.....................................

Extension

Difficult-to-focus subjects,, 117,202

External Speedlite

.................

Manual focusing .................

69, 120

Eye-Fi card

Out of focus ...............

...................................

47, 117, 202

Recompose

................................

Face detection Live mode (AF),,,,, !!4

Full Auto

.........................................

Faithful

............................................

FE lock

............................................

238

index

Function availability table .............. 210

Grid display ...........................

112, 134

HDMI .....................................

160, 167

HDMI CEC

(High-Definition Multimedia Interface

Consumer Electronics Control)._.168

High-Definition .............. !3!, 160, 167

Highlight alert ................................

173

Highlight detail loss .......................

173

Highlight tone priority .............. 62, 194

Histogram (Brightness/RGB) ........ 174

Household power ..........................

203 image dust prevention ..................

151 image review time ........................

138 image verification data .................

197 image Zone ....................................

20

Image-recording quality ..................

72 index display ................................

ISO expansion .........................

Maximum ISO speed

156 iSO speed ......................................

62

Auto ............................................

63

192 with Auto iSO .............................

63

JPEG ..............................................

72

Jump display ................................

157

ICC profile .......................................

Image

96

Auto playback ...........................

165

Erase ........................................

171

Highlight alert ............................

173

Histogram .................................

174 index .........................................

156

Jump display

(Image browsing) ......................

157

Magnified view ..........................

! 58

Playback .............................

58, 155

Protect ......................................

170

Rotate ...............................

142, 159

Shooting information ......... 110, 173

View on TV .......................

160, 167

Image area ......................................

34

Landscape ................................

5!, 75

Language selection ........................

30

LCD monitor ...................................

13

Auto off .....................................

146

Brightness adjustment ............. 139

Display switching .......................

44 image playback ..................

58, 155

Menu screen ..............................

40

Screen color .............................

146

Shooting settings display ........... 18

Lens ...................................

2!, 33- 35

Attaching/Detaching ...................

33

Lens peripheral illumination correction ......................................

104

Live mode (AF) .............................

113

239

Index

Live View shooting ........................

Focusing ...................................

Grid display ..............................

Possible shots ..........................

Long exposures --> Bulb

Low level format ........................

!07

113

112

109

42, 43

M (Manual exposure) ......................

83

Magnified view ......................

120, 158

Malfunction ...................................

2!8

Manual exposure ....................

83, 127

Manual focusing ......................

69, 120

Maximum burst ...............................

73

Memory card _ Card

Menu

Menu settings ...........................

212

My Menu ...................................

!98

Setting operation ........................

40

Metering mode ................................

86

Metering timer .......................

! 12, 134

MF (Manual focusing) ............. 69, 120

Microphone ...................................

134

Mirror Iockup .........................

106, 195

Mode Dial ........................................

20

Monochrome ...................................

76

Movie

Autoexposure shooting ............ ! 24

Editing out first and last scenes .....................................

164

Enjoying ...................................

160

File size ....................................

132

Frame rate ...............................

131

Manual exposure shooting ....... 127

Movie crop ...............................

131

Playback ..................................

162

Recording size .........................

131

Recording time .........................

132

Shooting ...................................

123

Sound recording ......................

134

Still photo shooting ...................

129

View on TV ......................

160, 167

My Menu ......................................

198

Neutral ............................................

76

Night Portrait ..................................

54

Night scene ....................................

51

Noise reduction

High ISO speed ........... 70, 74, 193

Long exposure ...................

84, 193

Nomenclature ..........................

!6 - 22

NTSC ...................................

131,214

ONE SHOT (One-Shot AF) ............ 66

One-Shot AF ..................................

66

P (Program AE) ..............................

60

PAL .......................................

131,214

240

Index

Paper settings (printing) ................ 178

Partial metering ...............................

86

PeripheraJ illumination correction,,, 104

PictB ridge ......................................

175

Picture Style

Adjustment ..................................

9!

Selection .....................................

75

User defined ...............................

94

Pixels ..............................................

72

Playback .................................

58, 155

Portrait ................................

50, 54, 75

Possible shots .........................

28, 109

Power

Auto power off .................... 27, 139

Battery check ..............................

28

Household power ......................

203

Possible shots .................... 28, 109

Recharge ....................................

24

Switch .........................................

27

Printing ..........................................

176

Page layout ...............................

179

Paper settings ...........................

179

Print Order (DPOF) ................... 185

Printing effects .................. 180, 182

Tilt correction ............................

183

Trimming ...................................

183

Program AE ....................................

60

Program shift ..............................

61

Protect (image erase-protection),,, 170

RAW ........................................

RAW+JPEG .............................

72 - 74

72 - 74

Recharge ........................................

24

Red-eye reduction ..........................

65

Release shutter without card .......... 31

Remote control shooting ....................

57, 7!, 133, 204

Revert to default settings ..............

144

Rotate (image) ......................

142, 159

Safety warnings ............................

233

Saturation .......................................

92

SD/SDHO/SDXC card -->Card

Self-timer ........................................

7!

Sensor cleaning .............. 27, 150, 153

Sepia (Monochrome) ......................

93

Sharpness ......................................

92

Shooting information display ..........................

110, 128, 173

Q (Quick Control) ............................

38

Quick Control screen ......................

38

Quick mode (AF) ...........................

118

241

Index

Shooting mode ................................

20

A-DEP

(Automatic depth-of-field AE) ..... 85

M (Manual exposure) .................

83

Av (Aperture-priority AE) ............ 80

Tv (Shutter-priority AE) ............... 78

P (Program AE) ..........................

60

_} (Creative Auto) .....................

55

O (Full Auto) .............................

46

(Flash Off) ............................

49

_ (Portrait) ................................

50

(Landscape) .........................

51

_,_ (Close-up) .............................

52

(Sports) .................................

53

(Night Portrait) .......................

54

_,_, (Movie shooting) ................. 123

Shooting settings display ................ !8

Shutter button .................................

37

Shutter-priority AE ..........................

78

Slide show ....................................

165

Sound recording ...........................

134

Speaker .........................................

162

Sports ..............................................

53

Spot metering ..................................

86 sRGB ..............................................

96

Standard .........................................

75

Stopped-down aperture ..................

82

Strap ...............................................

23

System map ..................................

2!6

Tv (Shutter-priority AE) ..................

78

Video system ........................

169,214

View on TV ...........................

160, 167

Viewfinder ......................................

19

Dioptric adjustment ....................

36

Volume (Movie playback) ............. 163

WB --> White balance

White balance ................................

99

Bracketing ................................

102

Correction ................................

101

Custom ......................................

99

Personal ...................................

100

Tone priority ..................................

! 94

Toning effect (Monochrome) ........... 93

Trimming (printing) ........................

183

242

EOS 550D

Menu Operations-

[_ Quick Control Screen

Image-recording Quality-

-

Picture Style

Nomenclature

Basic Zone Modes-

Using the Built-in Flash

Creative Zone Modes-

P: Program AE

Tv: Shutter-priority AE -

Av: Aperture-priority AE-

AF:

AF Mode- - - m AF Point

IS0: ISO Speed-

Drive Mode

Live View Shooting

_ Shooting Movies

Custom Functions

Image Playback-

EOS DIGITAL Solution Disk

Installing the Software

Software Instruction Manuat p.250

p.250

p.250

p.251

p.251

p.252

p.252

p.253

p.244

p.245

p.246

p.246

p.247

p.249

p.249

p.250

p.254

p.254

p.255

p.256

p.257

p.258

Quick Reference Guide

<MENU> button

- < _ > button

Cross keys

1. Press the <MENU> button to display the menu.

2. Press the <_ > key to select the tab, then press the

< A.V > key to select the desired item.

3. Press <0> to display the setting.

4. After setting the item, press <_T_>

Basic Zone Modes Movie Shooting Mode

Creative Zone

Modes

Menu

items

Menu settings

244

Quick Reference Guide

® With the shooting settings displayed, press the <_> button.

_o The Quick Control screen witt appear.

Shutter s compensation!

AEB setting

Shooting mode

/

Aperture

BSOspeed tone priority

Flash exposure compensation quality

Optimizer mode

Metering mode mode White balance

® Press the < _ > key to select the function, then turn the < _1_:_ dial to set it.

®

In the Basic Zone modes (except _), you can select certain drive modes and the imageorecording quality.

245

Quick Reference Guide

_> Select [_" Quality], then press <O>.

® Press the < 4_ > key to select the quality, then press < _ >.

Image-recording quality

Pixels shots

_> Press the < T _, > button.

® Press the <4_> key to select the Picture Style, then press

Standard

Portrait

Vivid colors and sharp images.

Nice skin tones and slightly sharp images.

Landscape Vivid blue skies and greenery and very sharp images.

Monochrome Black-and-wMte images.

® For <_> (Neutral) and <_> (Faithful), see page 76.

246

Quick Reference Guide

Power switch --

<WSO>ISO speed setting button

< _i_ >

Main Dial

Shutter button

Mode Dial

Flash button mode switch compensation button ......<(_> Setting button

247

Quick Reference Guide

Shooting Settings Display

Aperture

Shutter speed

Shooting mode

Picture Style

Image-recording quality

Quick Control icon

Battery check

AF

OK _ ....... NG

_eed

Exposure level indicator

White balance

Optimizer

Drive mode

-Possible shots

Metering mode indicator <o> circle metering

AF

AE

Flashoready

Flash exposure compensation

Shutter speed

Aperture confirmation light burst shooting speed

Exposure level indicator

248

Quick Reference Guide

All the settings necessary for

shooting are set automaticallyo You just press the shutter button, and the camera does the rest.

O Full Auto

Creative Auto

Flash Off

_ Portrait

Landscape

_ Closeoup

_A. Sports

Night Portrait

(Dispnayed onny when <_> is set.)

® Press the <_> button, then press the < _ > key to select the function.

® Turn the < £_:_> dial to set the function.

Basic Zone

Modes

If necessary, the built-in flash will pop-up automatically in Iowqight or backlit conditions (except in the <_> <_> <_> modes).

Creative Zone Modes

® Press the <_> button to pop up the built-in flash, then shoot.

249

Quick Reference Guide

You can change the camera settings as desired to shoot in various ways.

P: Program

AE

The camera automatically sets the shutter speed and aperture in the same way as the <0> mode.

® Set the Mode Diat to <P>.

Tv:

Shutter'priority AE

@ Set the Mode Dial to <Tv>,

® Turn the <_f_!_>dial to set the desired shutter speed, then focus the subject.

_* The aperture will be set automa%aHy.

® ffthe aperture display blinks, turn the

<_> dial until it stops blinking,

Av:

Aperture:priority AE

_ Set the Mode Dial to

<Av>,

® Turn the <_:_> dial to set the desired aperture, then focus the subject.

}*, The shutter speed will be set automatically.

® If the shutter speed display blinks, turn the < _!_> dial until it stops blinking.

250

Quick Reference Guide

B

B cu c_

B

B

® Set the tens focus mode switch to <AF>.

_> Press the <_ AF> button.

¢_ Press the < 4_ > key to select the AF mode, then press <_>.

ONE SHOT(One-Shot AF):

For still subjects

AI FOCUS(AI Focus AF):

Switches the AF mode automatically

AI SERVO(AI Servo AF):

For moving subjects

® Press the <m> button.

® Press the < _ > key to select the

AF point.

® While looking at the viewfinder, you can select the AF point by turning the < _tt[_> dial until the desired AF point flashes in red.

_ Pressing <8> toggles the AF point selection between the center AF point and automatic

AF point selection.

251

Quick Reference Guide

_ Press the <IS0> button.

_ Turn the <_t_[_> diaJ or press the

<_> key to select the ISO speed.

® When "AUTO" is selected, the

ISO speed is set automatically.

When you press the shutter button halfway, the JSO speed setting witt be displayed.

®

®

Press the <4 _ _®> button.

Press the <_> key to select the drive mode, then press <_T}>

D : Single

shooting

: Continuous shooting

_® : SelfotimedRemote

@2 : Se_fotimer:2 sec

®¢ : Se_fotiraer:Continuous* controt*

* The <_®> and <¢¢> drive modes can be selected in all shooting modes.

252

Quick Reference Guide

® Press the <_> button to dispJay the Live View image.

® Press the shutter button haJfway to focus.

® Press the shutter button compJeteJy to take the picture.

® To change the Live View settings, use the [9= Live View function

settings]

menu.

® Battery Life with Live View Shooting

253

Quick Reference Guide

® Set the Mode Dial to <_>.

® Press the shutter button halfway to focus.

® Press the <_> button to start shooting a movie. To stop movie shooting, press <l::_ > again.

® To shoot still photos, press the shutter button.

254

l!-ExPosuieievei

2 ISO expansion

3 Flash sync. speed inAv mode

4 Long exposure noise reduction

5 High ISO speed noise reduction

_6 Highlight tone priority

8 Mirror Iockup

9 Shutter/AE lock button

10 Assign SET button

!1

LCD display when power ON

12Add image verification data

Quick Reference Guide

Select image

D[SR Shooting information

y

Erase

P_ayback

255

Software Start Guide

EOS DIGITAL Solution Disk

This disk contains various software for EOS DiGiTAL.

EOS UtiJity

Software that lets you connect your computer and camera in order to download images (still images/movies) shot with the camera to the computer, set various settings of the camera, and remotely shoot photos by operating the computer.

Digital

Photo ProfessionaJ

This software is recommended for users who mainly shoot RAW

images. You can view/edit/process/print RAW images at high speed.

You can also edit JPEG images while retaining the original images=

ZoomBrowser EX (Win) /ImageBrowser (Mac)

This software is recommended for users who mainly shoot JPEG images. You car easily view/edit/organize/sort/print JPEG images. You can also play/edit MOV movies and extract still images from movies.

Picture

Style Editor

This software is aimed at advanced users who are experienced in editing images. The software edits Picture Styles and you can create/ save original Picture Style files.

256

Software Start Guide

JnstatJing the Software

_ Even if the previ0us version of the software is insta!led, install the software by fol!owing the steps below (the current software will overwrite the previous version),

_ Insert EOS DJGtTAL SoJution Disk (CD}.

® For Macintosh, double-click to open the CDoROM icon displayed on the desktop, and double-click on [Canon EOS Digital

Installer].

,'_ Click [Easy

InstalJation]

the screen to install.

and follow the instructions on

® For Macintosh, click [JnstaII].

_ CJiok [Restart] and remove the CD once the computer restarts.

® When the computer has restarted, the installation is complete.

257

Software Start Guide

Software instruction Manual

Contains the Instruction Manual flies for the software provided,

Copying and Viewing the Instruction Manual

PDFs

_ insert the [Software

iNSTRUCTiON

MANUAL]

CD into

your coraputer.

_ Double-click the CD-ROM icon.

® For Windows, it is the icon displayed in [My Computer].

® For Macintosh, it is the icon displayed on the desktop.

_ Copy the [English] folder to your coraputer.

® instructionManual PDFs with the following names are copied=

EOS Utility

Digital Photo Professional

Windows

EUx,xW E xx

DPPx,xW E xx

ZoomBrowser EX / ImageBrowser ZBx.xW E xx

Picture Style Editor PSEx,xW E xx

Macintosh

EUx.xM E xx

DPPx,xM E xx

IBx,xM E xx

PSEx.xM E xx

4 Double-click the copied PDF lime.

® Adobe Reader (Version 6,0 or later) must be installed in your computer,

® Adobe Reader can be downloaded free from the Intemet,

258

CANON INC. 30_2, Shimomaruko 3_chome, Ohta_ku, Tokyo 146_8501, Japan

U.S.A.

--

CANADA--

EUROPE,

AFRICA &

--

MIDDLE EAST

CENTRAL & --

SOUTH AMERICA

ASIA --

OCEANIA--

JAPAN --

CANON US.A

INO.

One Canon

Plaza,

Lake Success, NY 11042-1198, U.S.A.

For all inquires concerning fl'fis product, call toil free in the U.S.

1-800_OK.-CANON

CANON CANADA_NC HEADQUARTERS

6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada

CANON CANADA INC MONTREAL BRANCH

5990, C6te-de-Liesse, Montl'bal Qu6bec H4T 1V7, Canada

CANON CANADA INC. CALGARY OFFICE

2828,161h Street, N.E. Calgary, Alberta T2E 7K7, Canada

For all inquiries concerning this product, call toil free in Canada

1-800-ON CANON

CANON EUROPA N.V.

Bovenkerkerweg 59_81, f 185 XB Amste]veen, The Nefc!edands

CANON FRANCE S.AS.

17,Quai du President Paul Doumer, 92414 Courbevoie Cedex, France

CANON UK LTD.

Woodhatch Reigate,Surrey RH2 8BF, United Kingdom

CANON DEUTSCHLAND GmbN

Europark Fichtenhain A10, 47807 KrefeId, Germany

CANON ITALIA S.#.A.

Via Mflano 8, 20097 San Donato Mflanese, (MI), Italy

CANON Schweiz AG.

Industfiestrasse

Canon GmbH

12, 8305 Diet]ikon, Switzerland

Zetschegasse 11, A-1230 Vienna, Austria

CANON EspaSa,S.A

Av. De Europa,6 AIcobendas 28108 Madrid, Spain

CANON Portugal S.A.

Rua A]fredo da SiNa,14 A]fragide 2610_016 Amadora,

Portugal

CANON LATIN AMERICA, }NC.

703 Waterford Way, Suite 400 Miami, FL 33126,U.S.A.

CANON (China} 0o.

LTD.

15F Jinbao Building No.89

Jinbao Street, Dongcheng District, Beijing 100005, China

CANON NONGKONG CO., LTD.

19/F., The Metropolis rower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong

CANON S}NGAPORE PTE.

LTD.

1 HarbourFront Avenue, #04-01 Neppe] Bay Tower, Singapore 098632

CANON KOREA CONSUMER iMAGiNG INO,

Gangnam Finance Center 17F, 737,Yeoksam-Don9, Gangnam-Gu, Seoul, 135-984, Korea

CANON AUSTRALIA PTY, LTD,

1 Thomas Holt Drive, North Ryde, Sydney N.S.W.

2113, Australia

CANON NEW ZEALAND LTD,

Akoranga Business Park, Akoranga Drive, Northcote, AucNand, New Zealand

CANON MARKETING JAPAN }NC,

16_6, Nohnan 2-chome, Minato-ku, Tokyo 1088011, Japan

CT1-1036-002 @ CANON iNC. 2010

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement