SHOWER SPEAKER

FOR IPHONE, SMARTPHONES AND OTHER

BLUETOOTH MEDIA DEVICES

Included: AquaSound Shower Speaker WSP20, USB Charging Cable & Manual

Product Overview

DC5V

Features

• Bluetooth handsfree audio

• Connection with all Bluetooth enabled devices (mobile phones,

tablets, etc.)

• Built-in rechargeable lithium battery 400mAh

• USB power cable

• Ideal for travelling, easy installation, excellent sound quality

• Use in the shower, by the pool (not in) etc, in the rain

Keys

Power Phone Play/Pause Rewind/Volume - Forward/Volume +

Press to turn on or off speaker.

Press to pick up and hang up phone calls.

Press twice to redial last call

Press the key once to play or pause music.

Press once to go back to last song, hold down to decrease volume.

Press once to move on to next song, hold down to increase volume.

Pairing Your Device

Activate the Bluetooth speaker pairing mode by turning it off. Then,

Press and hold the power button for 6 seconds until the red LED and blue LED lights are flashing alternative. Now the speaker is ready for pairing.

1. Turn on your device and activate Bluetooth function.

2. Search for Bluetooth devices. Select AquaSound Shower

Speaker WSP20.

3. If prompted, enter password or PIN No:“0000”. Now AquaSound

Shower Speaker WSP20 will be connected to your device.

Note: Please make sure the speakers’ power is off when trying to activate the pairing mode.

Charging

The AquaSound Shower Speaker WSP20 is powered by an integrated rechargeable lithium battery. Charge as follows:

1. Insert the charging cable into the DC5V socket on the unit.

Connect the USB plug into a PC or AC/DC adaptor. When the

battery is charging the LED indicator turns red

2. When the indicator LED light goes out, the speaker is

fully charged

Safety Instructions

• Keep the device away from heat, direct sunlight and sharp edges

• Do not insert any metal object into the device. As this is a risk of

short circuit

• To avoid static charge, do not us in a extremely dry climate.

• Do not repair the unit yourself. Contact an authorized specialist

• Do not charge in the shower or other wet environments

• Only charge when unit is dry

• Do not submerge under water

Technical Specification

Bluetooth Support 3.0+EDR

Range 33 feet

Transmitting Frequency 2.4G Hz

Power Supply DC5v/100 ~ 120mA

Battery 3.7V 400MAH lithium battery

Charging Time Approx. 3 hours

Operating Time Approx. 6 hours

IP Grade IPx4

Unit Weight Approx. 3.5 oz

FCC Statement

This device complies with part 15 of the FCC Rules Operation. It is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference that is received,

including any interference that may cause an undesired operation

Warranty

Aduro warrants this product to be free from defects in materials and workmanship for one year. If your Aduro product is found to be defective within that time, Aduro will promptly replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Aduro liable for loss of, or damage to devices; nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Aduro has been informed of their possibility.

We’re here to help. If you have any issues with this product, please contact us at: [email protected]

Aduro Products LLC

109 Second Ave.

Brooklyn, NY 11215

USA

Telephone: 718-747-8886

© Aduro. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. In style mobile accessories at www.aduroproducts.com