Samsung 7100 Series User Manual

Samsung 7100 Series offers an immersive viewing experience with its stunning display and 3D capabilities. Enjoy crystal-clear images and vibrant colors that bring your favorite content to life. The Smart Touch Control provides intuitive navigation, while the 3D Active Glasses let you experience immersive 3D content. Connect your devices effortlessly and access a wide range of entertainment options with ease. Whether you're streaming movies, playing games, or exploring the web, Samsung 7100 Series delivers a seamless and captivating experience.

PDF Download

Document

LED TV

user manual

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________

✎

If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.

Important Safety Instructions

Warning! Important Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that important literature concerning operation and maintenance has been included with this product.

Ř The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

− Do not place this apparatus in a conﬁned space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

− Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

− Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a ﬁre or electric shock.

Ř Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.

Ř This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.

Ř Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in ﬁre or electric shock.

Ř Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where they exit from the appliance.

Ř To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

Ř Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

Ř Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

Ř To avoid electric shock, never touch the inside of this apparatus. Only a qualiﬁed technician should open this apparatus.

Ř Make sure to plug the power cord in until it is ﬁrmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.

Ř If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center.

Ř Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time

(especially when children, elderly or disabled people will be left alone in the house).

− Accumulated dust can cause an electric shock, an electric leakage or a ﬁre by causing the power cord to generate sparks and heat or the insulation to deteriorate.

Ř Be sure to contact an authorized service center for information if you intend to install your TV in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such in an airport, a train station, etc. Failing to do so may lead to serious damage of your TV.

Ř Use only a properly grounded plug and wall outlet.

− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

Ř To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.

Ř Do not allow children to hang onto the product.

Ř Store the accessories (battery, etc.) in a location safely out of the reach of children.

Ř Do not install the product in an unstable location such as a shaky self, a slanted ﬂoor or a location exposed to vibration.

Ř Do not drop or apply any shock to the product. If the product is damaged, disconnect the power cord and contact a service center.

Ř To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the TV or erase the printing on the product.

Ř Do not expose this apparatus to dripping or splashing.

Ř Do not dispose of batteries in ﬁre.

Ř Do not short-circuit, disassemble or overheat the batteries.

Ř There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.

Ř WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS

PRODUCT AT ALL TIMES.

English - 2

B a s i c F e a u r e s

Using the Smart Touch Control

6 Connecting to the TV

6 Inserting the Batteries (AAA X 2)

7 Low Battery Power Warning

Using the touch pad

8 Changing Channels by Entering Numbers

9 Show Status and Notiﬁcation Banner

9 Recommended

9 History

9 Searching

9 Using the Virtual Remote Control

Turning on the TV

Switching Between Video Sources

Universal Remote Setup

12 Add the External Device

N ie e t w w i n o r g k t h

C e o e n

ﬁ

Ma g u r n a u

Viewing the e-Manual

13 Scrolling a Page

13 Using the Top Icons

13 Returning to the Home Page

13 Searching the Index

14 Searching Pages

14 Closing the e-Manual

14 Jumping to a Menu Item

14 Updating the e-Manual t i a o

Connecting to a Network

15 Network Connection - Wireless

15 Wireless Network Precautions

15 Network Security Protocols

16 Network Connection - Wired l n

3 D B a s i c s

3D Active Glasses

17 Pairing 3D Active Glasses

19 Watching 3D Video

T ro u b le s h o t i n g a n d O t h e r

In f o r m a t i o n

What is Remote Support?

Troubleshooting

Mounting the TV on the Wall Using the Wall Mount Kit (Optional)

Assembling the Cable manager

Eco Sensor and Screen Brightness

Maintenance

Providing Proper Ventilation for Your TV

Securing the TV to the Wall

S p e c iﬁ c a t t i o n s

Speciﬁcations

Dimensions

Licenses

G u id e s

Warranty Information

Regulatory Compliance Statements

(For 3D Active Glasses)

SAMSUNG BRAND PRODUCTS

32 LIMITED WARRANTY TO

ORIGINAL PURCHASER

English - 3

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and speciﬁcations may change without notice.

Features of your new TV

Ř 3D : This new feature enables you to view 3D content.

Ř SMART HUB :

This TV features Smart Hub, a multi-purpose entertainment and family center. With Smart Hub, you can surf the web, download applications, and stay in touch with family and friends through social networking services. In addition, you can view or play photo, video, and music ﬁles stored on external storage devices.

Press the ™ button to launch Smart Hub. Choose a service using the icons displayed in the top part of the screen.

Smart Hub services and functionality include:

Social : Watch the latest YouTube videos and you and your friends' video posts on Facebook and

Twitter. You can also make video calls to friends by connecting the TV to a camera (sold separately).

Apps : Samsung Apps offers an extensive collection of free and paid news, sports, weather, and gaming content you can directly download to and enjoy on your TV.

On TV : Check a listing of programs that are currently airing or are scheduled to air.

Movies & TV Shows : Purchase and watch movies and series without a separate external device.

Photos, Videos & Music : Play back photo, video, and music ﬁles from an external storage device.

Ř Anynet+ (HDMI-CEC) : This allows you to control all connected Samsung devices that support

Anynet+ with your Samsung TV’s remote.

Ř e-Manual : Provides a detailed, on-screen user's manual built into your TV.

Ř SMART Interaction : Using this function, you can access and control menu options and functions using motions. To use the Smart Interaction Feature, connect the SMART TV camera (sold separately) to your TV.

Ř Device Manager : Use the TV features with a USB or Bluetooth keyboard and mouse.

Ř Screen Mirroring : Displays mobile device screens on your TV using a wireless connection.

English - 4

Using the Smart Touch Control

Use Voice Recognition function with the microphone embedded in remote control.

✎

The Voice Recognition function can be affected by unclear pronunciation, voice level, or surrounding noise.

Turns the TV on and off.

Displays and selects the available video sources.

MIC

SOURCE

STB

VOICE CH

VOL

MUTE : Cuts off the sound temporarily.

MORE

Adjusts the volume.

LIGHT : Turn on the backlight for the buttons. The backlight lasts for only a few seconds. Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to On will reduce the battery usage time.)

DVR : Displays the STB EPG

(Electronic Program Guide).

MENU : Opens the OSD.

3D : Turns the 3D function on or off.

See the e-Manual chapter,

TV Viewing > 3D TV .

Returns to the previous menu.

LIGHT DVR MENU 3D

RETURN

EXIT SMART HUB

GUIDE

Turn on and off the satellite or cable set-top box connected to the TV.

For this, the Smart Touch Control must be conﬁgured as a universal remote control. See the e-Manual chapter,

Controlling the TV > Universal

Remote Setup .

VOICE : Take your voice command and enter a text using your voice.

Changes channels.

Displays a virtual remote panel on the screen. See the e-Manual chapter,

Controlling the TV > Using the Virtual

Remote Control .

Touch Pad

Ř Drag on the touch pad to move the focus on the screen.

Ř Press the touch pad to run, activate, or select the highlighted item.

Ř Press and hold the touch pad to display the Channel List .

Displays the EPG

(Electronic Program Guide).

Brings up Smart Hub applications.

See the e-Manual chapter, SMART TV

Features > Smart Hub .

✎

To exit an application that is running easily, press the ™ button.

English - 5

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must ﬁ rst pair it to the TV via Bluetooth.

However, the Smart Touch Control is only available for the paired Samsung TV.

1. To turn on the TV, point the Smart Touch Control at the remote control receiver of the TV and press the

P button. The remote control receiver's location may vary depending on the model.

2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to the Smart Touch Control automatically.

Inserting the Batteries (AAA X 2)

1 2 3

1. Slightly lift the battery cover by pulling the strap or using a plastic card (e.g. a credit card). Next, pull on the cover’s notch with a ﬁ ngernail to remove the cover completely.

2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.

3. Align the battery cover with the back of the remote control, and then press down along the edges until it is completely attached to the remote control.

English - 6

Reconnecting the Smart Touch Control

If you need to reestablish the connection between the TV and the Smart Touch Control, press the pairing button at the back of the Smart Touch Control, pointing at the remote control sensor of the TV.

The pairing button can be accessed by removing the Smart Touch Control's battery cover. Pressing the pairing button automatically reestablishes the connection between the Smart Touch Control and the TV.

Low Battery Power Warning

If the battery becomes low while using the Smart Touch Control, the following alarm window appears at the bottom of the left screen. If the alarm window pops up, replace the batteries of the Smart Touch Control.

Use alkaline batteries for longer usage.

English - 7

Using the touch pad

Use the touch pad to implement various commands. Navigate to Tutorial ( System > Device Manager >

Smart Touch Control Settings > Tutorial ) to view an on-screen guide to using the Smart Touch Control.

Dragging Pressing

Drag on the touch pad to move the focus, pointer, or highlight in the direction the ﬁnger is dragging.

Press the touch pad to select the item highlighted or in focus.

When watching TV, press and hold the touch pad for 2 seconds displays the channel list. On some apps, press and hold the touch pad for 2 seconds displays a list of functions available for the app.

Changing Channels by Entering Numbers

While watching TV, tap on the protruding line on the left or right edge of the touchpad to bring up the numerical input window on the screen. Use your ﬁnger to enter the number for the channel you want to watch. The recognized number is displayed on the screen and the TV switches to the corresponding channel. However, the number you have entered may not be recognized properly by the TV. Refer to the guide below to ensure that your numerical entries are recognized accurately.

Numerical Input Guide

Refer to the diagrams below when entering numerical values. The TV may not recognize your entries if you do not follow the sequences shown below.

English - 8

Show Status and Notiﬁcation Banner

Press the MORE button on the Smart Touch Control and then select STATUS on the virtual remote panel that appears on the screen. The status and notiﬁcation banner appears at the top of the screen. For more information about using the status and notiﬁcation banner, refer to e-Manual > SMART TV Features >

Status and Notiﬁcation .

History

Press the RECOMM. / SEARCH button and then select History from the list displayed at the bottom of the screen. This displays an interactive list of recently accessed channels, media content and applications.

Searching

Press the RECOMM. / SEARCH button on the Smart Touch Control. The list appears at the bottom of the screen. Press the RECOMM. / SEARCH button again. The keypad will appear on the screen. Enter search criteria to search not only many apps and their contents on the TV but also the Web.

Refer to e-Manual > SMART TV Features > Searching for more information.

Using the Virtual Remote Control

Press the MORE button to display the virtual remote panel on the TV screen. The virtual remote panel consists of the number panel, a playback control panel, and the quick access panel. Use the touch pad to highlight and select icons, numbers, and buttons on the panels.

✎

The displayed virtual remote panel on the TV screen may differ depending on the country.

Channel History

E F G

Netﬂix INFO Amazon

No Channel numbers have been saved.

TOOLS 3D STATUS MENU

TOOLS

PIP

P.Size

Ext. Speaker

MTS

B e-Manual

Changing the Virtual Remote Panel

You can change which virtual remote panel is displayed on the TV screen. To shift between panels, move the focus highlight beyond the left or right edge of the displayed panel.

Use left/right scroll function on the touch pad to change the panel easily.

English - 9

Change a position of the Virtual Remote Panel

Press the MORE button on the Smart Touch Control. The virtual remote panel appears on the screen.

Press and hold the touch pad for one second. Users can change a position of the virtual remote panel of the screen.

Using the Number Panel

Use the number panel to enter numbers on a keypad screen or webpage or to change the channel while watching TV. Changing the channel using the number pad leaves a record, allowing you to easily return to previous channels.

Using the Playback Control Panel

Use the playback control panel to pause, rewind, fast forward, skip to the next ﬁle, select a function with the a , b , { , } button, and much more while enjoying media content.

Using the Quick Access Panel

Use the buttons on the quick access panel to bring up the TV's TOOLS , INFO , or e-Manual screens. Note that the buttons that appear may vary depending on the operating mode of the Smart Touch Control (with the TV only, as a universal remote, etc.).

Turning on the TV

Turn on the TV using the P button on the Smart Touch Control or TV panel.

✎

The product color and shape may vary depending on the model.

✎

The first time you turn on your TV, it will immediately start the initial setup.

✎

The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control.

Open Smart Hub.

Open the menu.

m R

Turn off the TV.

TV Controller

The control stick is located at the lower-left corner on the back of the TV.

Select a source.

Remote control sensor

When you use the Smart Touch

Control, the standby LED does not respond, except when you press the P button.

RETU

EXIT

LIG

DVR

SMART HU

MENU

GUIDE

VOL

MORE

VOICE

SOURCE

MIC

STB

English - 10

Switching Between Video Sources

Press the SOURCE button to switch between devices connected to the TV.

For example, to switch to a game console connected to the second HDMI connector, press the SOURCE button. From the Source list, select HDMI2 . The connector names may vary depending on the product.

Select Tools at the upper-right corner of the source screen to access the following functions.

Ř Edit Name : Lets you associate a device name to an input source.

You can select the following device names in the Edit Name option:

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI

PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA

To associate a device name to an input source follow these steps:

1. Select Tools in the upper right corner of the source screen.

2. Select Edit Name .

3. Find the input source you want in the Source list (HDMI1, HDMI2, Component, etc.).

4. Select the blank ﬁeld next to the input.

5. In the device name list that appears, select the name of the device attached to the input.

When you view the Source list, the device name and the input jack will be displayed together.

− If you have connected a PC to the HDMI IN 4 (DVI) port with an HDMI cable, select PC from the device name list.

− If you have connected a PC to the HDMI IN 4 (DVI) port with an HDMI to DVI cable, select DVI PC from the device name list.

− If you connected an AV device to the HDMI IN 4 (DVI) port with an HDMI to DVI cable, select DVI

Devices from the device name list.

Ř Information : View detailed information about the connected devices.

Ř Refresh : Select if a connected device does not appear in the list. If the list does not show the device after selecting Refresh , check the status of the TV-to-device connection.

Ř Remove USB : Remove the USB device from the list safely. This function is only available when the

USB device selected.

Universal Remote Setup : Use to conﬁgure universal remote control settings. Using the universal remote control, you can control external devices connected to the TV, such as a set-top box, Blu-ray player, and

AV receiver.

English - 11

Universal Remote Setup

This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home theaters, and other third-party external devices connected to the TV using the TV's remote control.

2 inches

Keep a distance of 2 inches at least between the IR Extender and the external device, as the illustration shows. Face the IR Extender toward the external device’s remote control signal receiver. Note that it should be no obstacle between IR Extender and external device. The presence of an obstacle will interfere with the transmission of the remote control signal.

Add the External Device

1. Turn on the external device you wish to set up universal remote function for and then press the

SOURCE to bring up the Source screen.

2. Select Universal Remote Setup from the top of the screen. This initiates the universal remote setup process.

3. Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the remote control by entering the model number manually.

English - 12

Viewing the e-Manual

This TV has a built-in e-Manual that contains information about your TV's key features and instructions for using them. To view the e-Manual, use one of the following methods:

Ř Open the Support menu and choose e-Manual (Troubleshooting) .

Ř Press the MORE button on the Smart Touch Control to display the virtual remote panel on the TV screen. Flick the touch pad until the quick access panel appears, select the e-Manual icon, and then press the touch pad.

✎

In the e-Manual, words in blue refer to screen menu options and words in light blue refer to remote control buttons.

✎

A printable version of this guide is also available at www.samsung.com/support.

Scrolling a Page

To scroll a page, use of one of the following methods:

Ř Place the focus on the or button at the right edge of the screen, and then press the touch pad.

Ř Drag or ﬂick up or down the line on either the left or right edge of the touch pad.

Ř Place the focus on the or button at the right edge of the screen, drag or ﬂick up or down on the touch pad.

Using the Top Icons

Use the Back , Forward , and Opened pages icons on the top left of the screen to navigate through pages. These icons are available after you have viewed two or more pages.

Returning to the Home Page

To return to the home page, select the a button or select on the top right of the screen.

✎

To select a letter button ( a , b , { , } ), press the MORE button on the Smart Touch Control to display the virtual remote panel on the TV screen. Flick the touch pad until the playback control panel appears, select the a button, and then press the touch pad.

Searching the Index

Select the b button or select on the top right of the screen to display the index. Select a term to display the page containing the term.

English - 13

Searching Pages

Select the { button or select on the top right of the screen, and enter search criteria. Select a page from the list of search results to display it.

Closing the e-Manual

To close the e-Manual, press and hold the RETURN button or select at the upper-right corner of the screen.

Jumping to a Menu Item

To jump directly to the menu item that is described in the current section, select . It is possible to jump from a menu item directly to the related section in the e-Manual. On a menu screen, press the MORE button on the Smart Touch Control and then select e-Manual on the virtual remote panel that appears on the screen.

✎

This feature may not be available, depending on the menu.

Picture

Picture Mode

۷ Backlight

۷ Contrast

۷ Brightness

۷ Sharpness

۷ Color

۷ Tint (G/R) G50

Standard

100

R50

e-Manual

Try Now

Updating the e-Manual

Press the ™ button and select Apps , and then select More Apps . The e-Manual can be updated in the same way with an application update.

On the More Apps screen, select Update Apps , and then select e-Manual from the list. The e-Manual starts updating to the latest version. However, Update Apps appears on the screen only when the update is required.

English - 14

Connecting to a Network

Connecting the TV to a network gives you access to online services such as Smart Hub and lets you update the TV's software online directly from Samsung.com.

Network Connection - Wireless

Connect the TV to the Internet using a standard wireless router or modem.

The LAN Port on the Wall

Wireless IP Router or Modem that has a DHCP Server

LAN Cable (Not Supplied)

Wireless Network Precautions

Ř This TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using

IEEE 802.11n. Otherwise, when you play video over a network connection, the video may not play smoothly.

Ř To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.

Ř Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is currently being used by another device, the result is usually interference and/or a communications failure.

Ř Most wireless networks have an optional security system. To enable a wireless network's security system, you need to create a security key using characters and numbers, and then enter that key into the router through its menu. You then must enter this security key into any other devices you want to connect to the wireless network.

Network Security Protocols

The TV only supports the following wireless network security protocols:

Ř Authentication Modes: WEP, WPAPSK, WPA2PSK

Ř Encryption Types: WEP, TKIP, AES

In compliance with the newest Wi-Fi certiﬁcation speciﬁcations, Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802.11n mode.

If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using

PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically configures the SSID and WPA key settings.

Your Smart TV cannot connect to uncertiﬁed wireless routers.

English - 15

Network Connection - Wired

There are three main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:

TV Rear Panel

The Modem Port on the Wall External Modem

(ADSL / VDSL / Cable TV)

Modem Cable (Not Supplied) LAN Cable (Not Supplied)

The Modem Port on the Wall External Modem

(ADSL / VDSL / Cable TV)

IP Router that has a

DHCP Server

TV Rear Panel

Modem Cable

(Not Supplied)

The LAN Port on the Wall

LAN Cable

(Not Supplied)

LAN Cable

(Not Supplied)

TV Rear Panel

LAN Cable (Not Supplied)

✎

The TV does not support network speeds less than or equal to 10Mbps.

✎

Use Cat 7 cable for the connection.

English - 16

3D Active Glasses

Features

Samsung's SSG-5100GB 3D glasses enable you to view 3D images on your 3D TV. The Samsung 3D glasses communicate with Samsung 3D TVs via the 2.4GHz RF band.

✎

The Samsung 3D glasses are only compatible with Samsung D, E, and F series 3D TV's that were released in 2011, 2012, and 2013. These 3D glasses cannot be connected to other Bluetooth devices.

Parts

LED Indicator & Power Button

Battery Cover

✎

For details on how to attach the glasses' temples, refer to the separate 3D glasses manual.

For details on how to pair the glasses with the

TV, refer to the separate 3D glasses manual or to page 14 in this manual.

Liquid crystal shutter

Replacing the Battery

If the red LED blinks every two seconds continually, replace the battery with a new one.

✎

Insert the "+" side of the battery into the side marked with "+" in the battery compartment.

✎

To check the remaining battery capacity, refer to the pairing section in this manual.

Pull the battery cover downward

Open the battery cover Remove the battery Replace the battery Push the battery cover downward

Close the battery cover

Pairing 3D Active Glasses

✎

What is Pairing? Pairing is the process of connecting 3D glasses and a 3D TV so that the two devices can exchange data.

✎

Ensure your Samsung TV and 3D glasses are no farther than 19.5 in (50 cm) apart from each other while pairing is in progress.

English - 17

Ř Turning the glasses on

Press the power button brieﬂy. The green LED turns on for 3 seconds.

(Make sure that 3D is activated on the TV before using the 3D glasses.)

Ř Turning the glasses off

Press the power button brieﬂy. The red LED turns on for 3 seconds.

Ř Performing the pairing process

Turn the TV on and let it power up completely. Press and hold the Power button on the glasses. The green and the red LEDs blink alternately for 2 seconds.

Ř Operating range

Recommended pairing distance

2~6m

50cm

Recommended viewing distance

Recommended viewing distance Recommended pairing distance

2~6m (6.5 to 19.5 ft) 50 cm or less (19.5 in)

✎

Once the 3D glasses are paired, the remaining battery capacity is displayed on the TV screen. (This feature only applies to Samsung F series 3D TVs and 3D glasses that have been available since 2013.)

✎

If you keep trying to pair the glasses and the TV after pairing has failed, the battery level will decrease significantly. However, the battery level will recover to a certain degree in about a minute.

✎

The working distance is affected by the presence of obstacles (a person, metal, walls, etc.) between the glasses and the TV and the strength of the Bluetooth signal.

✎

Turn off the 3D glasses when they are not in use. If you leave the 3D glasses on, the battery lifespan decreases.

Pairing steps

1. Turn on the TV, and then move the glasses within 19.5 inches of the TV.

2. Press the power button on the 3D glasses brieﬂy. The 3D glasses will power on and pairing will start.

3. The message “3D glasses are connected to TV.” will be displayed on the TV screen when the pairing is successfully completed.

Ř If pairing fails, the 3D glasses will power off.

Ř If the ﬁrst attempt to pair fails, power the TV off and on again and perform step 2.

Ř How to pair again: Press the power button on the 3D glasses for more than 1 second.

You must pair the glasses again in the following situations:

− If the 3D glasses do not function, even when the power button is pressed, especially if the TV has just been a repaired.

− If you want to play 3D content on another Samsung 3D TV model that belongs to the D, E, or F series released in 2011 through 2013. You must pair the glasses with the other TV.

English - 18

Watching 3D Video

Some 3D modes may not be available depending on the format of the image source.

To watch in 3D, you must wear 3D Active Glasses and turn the glasses on by pressing the power button.

1. Go to the 3D screen. ( Picture > 3D )

2. Select the 3D Mode. The 3D Mode screen appears.

3. Set the 3D Mode of the image you want to view.

Troubleshooting

If you encounter...

My 3D glasses do not work.

The LED keeps blinking

Try this...

Replace the battery.

The 3D glasses should be close to the TV. Make sure that the distance between the TV and your 3D glasses is less than 19.5 feet (6m) in a straight line.

Check the 3D function settings of your TV.

The battery is dead. Replace the battery.

Speciﬁcations (Model Number: SSG-5100GB)

Optics

Weight

Power

Power consumption

Operating conditions

Shutters

Recommended operating distance

Glasses

Liquid crystal Transmittance

2 ~ 6m (6.5 to 19.5 ft) Field Rate

36±2%

120 ﬁelds/second

21.5g/.76 oz. (including the battery: 24.0±0.5g/.85.±.018oz. )

Glasses

Battery

One 3V lithium/manganese dioxide battery 3V (CR2025)

0.85mA (Average)

Type

Operating time

165mAh, 3.0V (CR2025)

150 hours

Operating temperature

Custody temperature

50 °F ~ 104 °F (10°C ~ 40°C)

-4 °F ~ 113 °F (-20°C ~ 45°C)

✎

Product specifications may be changed without notice in order to enhance product performance.

✎

The continuous operating time may differ depending on the wireless communication environment and usage conditions.

English - 19

What is Remote Support?

Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can remotely.

Ř Diagnose your TV

Ř Adjust the TV settings for you

Ř Perform a factory reset on your TV

Ř Install recommended ﬁrmware updates

How Does it Work?

Having a Samsung Tech remotely service your TV is easy.

1. Call the Samsung

Contact Center and ask for remote support.

2. Open the menu on your TV and go to the Support section .

3. Select Remote

Management and

Provide the Pin# to the agent.

4. The agent will then access your TV .

That's it!

English - 20

Troubleshooting

If the TV seems to have a problem, ﬁrst review this list of possible problems and solutions. Also, review the

Troubleshooting Section in the e-Manual. If none of the troubleshooting tips apply, visit www.samsung.

com/support or call Samsung Customer Service at 1-800-SAMSUNG (1-800-726-7864).

Issues

Flickering and Dimming

Component Connections /Screen Color

Screen Brightness

Auto Motion Plus /Blur

Unwanted Powering Off

Trouble Powering On

Stand Assembly

Cannot Find a Channel

Solutions and Explanations

If your Samsung Television is ﬂickering or dimming sporadically, you may need to disable some of the energy efﬁciency features.

Disable Energy Saving ( System > Eco Solution > Eco Sensor ) and/or Energy Saving ( System > Eco

Solution > Energy Saving ) and check again.

If you ﬁnd that the color on your Samsung television screen is not correct or the black and white colors are off, run a Self Diagnosis Picture Test ( Support > Self Diagnosis > Picture Test ).

If the picture problem is caused by the TV, the problem should be visible in the Picture Test. If the problem is not visible, next conﬁrm that the TV's video input jacks are connected to the correct external video device output jacks and that none of the connections are loose. Finally, if possible, test your external video devices by connecting them to another TV.

If you ﬁnd that the colors on your Samsung TV are correct but just a little too dark or bright, try adjusting the following settings ﬁrst.

Navigate to Picture and adjust Backlight , Contrast , Brightness , Sharpness , Color , Tint (G/R) and other picture quality adjustment settings.

If you ﬁnd that there is a blur or “ghost” shadow to the images on your television screen, you might be able to correct the issue using Auto Motion Plus ( Picture > Picture Options > Auto Motion Plus ).

If your Samsung TV appears to turn off by itself, try disabling some of the TV's energy efﬁciency and automatic off features. Check if Sleep Timer ( System > Time > Sleep Timer ) has been enabled. Sleep

Timer automatically turns off the TV after an amount of time that you select. If the Sleep Timer has not been enabled, see if No Signal Power Off ( System > Eco Solution > No Signal Power Off ) or Auto

Power Off ( System > Eco Solution > Auto Power Off ) has been enabled. No Signal Power Off turns off the TV if no signal has been received by the TV for a speciﬁed period time. Auto Power Off turns off the TV if there has been no user input in four hours.

When the TV is turned on, the remote control receiver ﬂashes 5 times before the screen turns on.

If you ﬁnd that you are having problems powering on your Samsung television, there are a number of things to check before calling the service department.

If the power cord is connected properly and the remote control is operating normally, the problem might be with the antenna cable connection or the cable/satellite box not being turned on. Check the antenna connection or turn on the cable/satellite box.

If you have any trouble assembling the stand, review the stand assembly instruction in the Quick Start

Guide.

Re-run Setup (Go to Menu > System > Setup ) or run Auto Program . (Go to Menu > Broadcasting >

Auto Program ).

✎

For detailed troubleshooting information, watch the troubleshooting videos at www.samsung.com/ spsn.

English - 21

Issues

The TV won’t turn on.

There is no picture/video.

The remote control does not work.

The cable/set top box remote control doesn’t turn the TV on or off or adjust the volume.

Solutions and Explanations

Ř Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

Ř Make sure the wall outlet is working.

Ř Try pressing the P button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “Remote control does not work” below.

Ř Check the cable connections. Remove and reconnect all cables connected to the TV and external devices.

Ř Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-ray etc) to match the TV's input connections. For example, if an external device’s output is HDMI, it should be connected to an

HDMI input on the TV.

Ř Make sure your connected devices are powered on.

Ř Be sure to select the correct input source.

Ř Reboot the connected device by unplugging it, and then reconnecting the device’s power cable.

Ř Replace the remote control batteries. Make sure the batteries are installed with their poles (+/–) in the correct direction.

Ř Clean the sensor’s transmission window on the remote.

Ř Try pointing the remote directly at the TV from 5~6 feet away.

Ř Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set-Top-Box user manual for the SAMSUNG TV code.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. There may be, however, a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

✎

To keep your TV in optimum condition, upgrade to the latest software. Use the Update Now or Auto

Update functions on the TV's menu (Screen Menu > Support > Software Update > Update now or

Screen Menu > Support > Software Update > Auto Update ).

Mounting the TV on the Wall Using the Wall Mount Kit

(Optional)

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product.

Installing the Wall Mount Kit

The wall mount kit (sold separately) lets you mount the TV on the wall.

For detailed information about installing the wall mount, see the instructions provided with the wall mount.

We recommend you contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.

To order the wall mount kit, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).

English - 22

Installing a Wall Mount using the Wall mount adapter

✎

For more detailed information, refer to the User Manual of the Wall Mount Kit.

VESA Wall Mount Kit Notes and Speciﬁcations

✎

Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎

NOTE

Ř Standard dimensions for wall mount kits are shown in the table below.

Ř Samsung wall mount kits contain a detailed installation manual, and all parts necessary for assembly are provided.

Ř Do not use screws that do not comply with VESA standard screw speciﬁcations.

Ř Do not use screws that are longer than the standard length or do not comply with VESA standard screw speciﬁcations. Screws that are too long may cause damage to the inside of the TV set.

Ř For wall mounts that do not comply with the VESA standard screw speciﬁcations, the length of the screws may differ depending on the wall mount speciﬁcations.

Ř Do not fasten the screws too ﬁrmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

Ř Samsung is not liable for product damage or personal injury when a non-VESA or non-speciﬁed wall mount is used or the consumer fails to follow the product installation instructions.

Ř Do not mount the TV at more than a 15 degree tilt.

Ř Always have two people mount the TV on to a wall.

Product Family TV size in inches

19 - 22

VESA screw hole specs

(A * B) in millimeters

75 X 75

Standard Screw

100 X 100

Quantity

LED-TV

[Slim]

32 - 42 200 X 200

46 - 65 400 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury from electric shock.

English - 23

Assembling the Cable manager

Eco Sensor and Screen Brightness

Eco Sensor measures the light in your room and optimizes the brightness of the TV automatically to reduce power consumption. This causes the TV to brighten and dim automatically. If you want to turn this function off, go to Menu > System > Eco Solution > Eco Sensor

Do not block the sensor with any material. It can decrease picture brightness.

English - 24

Maintenance

✎

If a sticker was attached to the TV screen, some debris can remain after you remove the sticker.

Please clean the debris off before watching TV.

✎

The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using the cloth provided or a soft cloth to prevent scratches.

Do not spray water directly onto the product. Any liquid that goes into the product may cause a failure, ﬁre, or electric shock.

Clean the product with a soft cloth dampened with a small amount of water. Do not use a ﬂammable liquid (e.g. benzene, thinners) or a cleaning agent.

Providing Proper Ventilation for Your TV

When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a ﬁre or a problem with the product caused by an increase in its internal temperature.

✎

Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts provided by Samsung Electronics only.

Ř If you use parts provided by another manufacturer, it may cause difﬁculties with the product or result in injury caused by the product falling.

Installation with a stand.

4 inches

Installation with a wall-mount.

4 inches

4 inches 4 inches

4 inches

Other Warnings

✎

The actual appearance of the TV may differ from the images in this manual, depending on the model.

✎

Be careful when you touch the TV. Some parts can be warm or hot.

English - 25

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the

TV to fall. In particular, ensure your children do not hang on or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety, you can purchase and install the anti-fall device as described below.

To Avoid the TV from Falling

1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall.

✎

You may need additional material such as an anchor depending on the type of wall.

✎

Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

2. Remove the screws from the back center of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

✎

Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.

✎

Screw Specifications

Ř For a 19 - 28 inches: M4

Ř For a 32 - 65 inches: M8

3. Connect the clamps ﬁxed onto the TV and the clamps ﬁxed onto the wall with a strong cable and then tie the string tightly.

✎

NOTE

− Install the TV near to the wall so that it does not fall backwards.

− It is safe to connect the string so that the clamps ﬁxed on the wall are equal to or lower than the clamps ﬁxed on the TV.

− Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.

English - 26

Speciﬁcations

Display Resolution

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

Stand Swivel (Left / Right)

Model Name

Screen Size

(Diagonal)

Sound

(Output)

Dimensions (W x H x D)

Body

1920 x 1080

UN46F7100

46˝ Class

(45.9 measured diagonally)

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

-20˚ ~ 20˚

UN55F7100

55˝ Class

(54.6 measured diagonally)

10W x 2

With stand

40.8 x 23.6 x 1.2 inches

(1036.6 x 601.6 x 30.8 mm)

40.8 x 26.6 x 12.0 inches

(1036.6 x 677.1 x 307.2 mm)

48.3 x 27.9 x 1.2 inches

(1227.9 x 709.4 x 30.8 mm)

48.3 x 30.9 x 12.0 inches

(1227.9 x 784.9 x 307.2 mm)

Weight

Without Stand

With Stand

Model Name

Screen Size

(Diagonal)

Sound

(Output)

Dimensions (W x H x D)

Body

24.6 lbs (11.2 kg)

28.2 lbs (12.8 kg)

UN60F7100

60˝ Class

(60.0 measured diagonally)

10W x 2

32.8 lbs (14.9 kg)

36.3 lbs (16.5 kg)

UN65F7100

65˝ Class

(64.5 measured diagonally)

With stand

53.7 x 31.3 x 1.2 inches

(1366.0 x 795.9 x 31.2 mm)

53.7 x 34.6 x 14.7 inches

(1366.0 x 879.8 x 375.6 mm)

57.1 x 33.0 x 1.2 inches

(1451.4 x 840.2 x 32.2 mm)

57.1 x 36.3 x 14.7 inches

(1451.4 x 923.2 x 375.6 mm)

Weight

Without Stand

With Stand

43.6 lbs (19.8 kg)

49.3 lbs (22.4 kg)

50.8 lbs (23.05 kg)

56.5 lbs (25.65 kg)

✎

Design and specifications are subject to change without prior notice.

✎

The actual appearance of the TV may differ from the images in this manual, depending on the model.

✎

This device is a Class B digital apparatus.

✎

For information about the power supply, and more information about power consumption, refer to the label attached to the product.

✎

Typical power consumption is measured according to Energy Star Program requirements for

Televisions.

Dispose unwanted electronics through an approved recycler.

To ﬁnd the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799

Standby mode

To decrease power consumption, unplug the power cord when you don't intend to use the TV for a long time.

English - 27

Dimensions

Ř Jack panel detail / Rear view

3 1

(Unit: inches)

✎

The displayed image may differ depending on the model.

Model name

UN46F7100

UN55F7100

UN60F7100

UN65F7100

1 2 3 4 5

15.7 15.7 12.5 2.9 4.6

15.7 15.7 16.2 6.5 5.2

15.7 15.7 19.0 8.5 6.6

15.7 15.7 20.6 10.2 6.7

NOTE : All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions before installing your TV. Not responsible for typographical or printed errors.

Licenses

English - 28

Warranty Information

Federal Communication Commission

Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Ř Reorient or relocate the receiving antenna.

Ř Increase the separation between the equipment and receiver.

Ř Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Ř Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.

This device and its antenna(s) must not be colocated or operation in conjunction with any other antenna or transmitter.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.

This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.

This device and its antenna(s) must not be colocated or operation in conjunction with any other antenna or transmitter.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

IC Radiation Exposure Statement:

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

English - 29

IMPORTANT WARRANTY INFORMATION

REGARDING TELEVISION FORMAT

VIEWING

✎

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen, 16:9 ratio format, or expanded to ﬁll the screen, if your model offers this feature, with the images constantly in motion. Displaying stationary graphics and images on the screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than

5% of the total television viewing time per week.

Additionally, viewing other stationary images and text such as stock market crawls, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture.

Be careful about the television formats you select and the length of time you view them. Uneven LED aging as a result of format selection and use, as well as burned in images, are not covered by your

Samsung limited warranty.

Ř SAMSUNG ELECTRONICS NORTH

AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited

Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide

Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally speciﬁed, and to the Original

Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service

Center. Along with this Statement, the Original

Limited Warranty Statement and a dated Bill of

Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized

Service Center, please call toll-free:

− In the United States: 1-800-SAMSUNG (1-

800-726-7864)

− In Canada: 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles), still image elements (such as TV channel logos, stock or news bars at the screen bottom etc.), or programs in panorama or 4:3 image format on the screen. Constantly displaying still pictures can cause image burn-in on the LED screen, which will affect image quality. To reduce risk of this effect, please follow the recommendations below:

Ř Avoid displaying the same TV channel for long periods.

Ř Always try to display any image in full screen.

Use the TV set’s picture format menu for the best possible match.

Ř Reduce brightness and contrast to avoid the appearance of after-images.

Ř Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.

English - 30

Regulatory Compliance Statements

(For 3D Active Glasses)

FCC COMPLIANCE

Federal Communication Commission Interference Statement

1. Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

2. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Ř Reorient or relocate the receiving antenna.

Ř Increase the separation between the equipment and receiver.

Ř Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Ř Consult the dealer or an experienced radio/TV technician for help.

FCC Caution : Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CALIFORNIA USA ONLY

This perchlorate warning applies only to primary CR

(Manganese Dioxide)

Lithium coin cells in the product sold or distributed ONLY in California USA

" Perchlorate Material - special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate."

English - 31

SAMSUNG BRAND PRODUCTS

LIMITED WARRANTY TO ORIGINAL

PURCHASER

This SAMSUNG brand product, as supplied and distributed by

SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of 90

Days Parts and Labor for Commercial Use

Categories Parts Labor

LCD/LED TV 1 Year 1 Year

40”

Size and Larger

37” and Smaller

Service

Carry-In or In

Home

Carry-In

Plasma Display

Projector

(Excluding Lamp **)

PICO & LED

Pocket Projector

1 Year

2 Year

1 Year

2 Year

1 Year

All

Carry-In or In

Home

Carry-In or

Pick up

Carry-In or

Pick up

** 180 Days after Purchasing and 600 Hours of Use Lamp on Projector

This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to

SAMSUNG or SAMSUNG's authorized service center.

SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period speciﬁed above.

All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.

Certain products are eligible for In-home service at Samsung’s discretion.

To receive in-home service, the product must be unobstructed and accessible to service personnel. If during in-home service, repair cannot not be completed, it may be necessary to remove, repair and return the product. If in-home service is unavailable, SAMSUNG may elect, at our option, to provide for transportation of our choice to and from a

SAMSUNG authorized service center. Otherwise, and for 37" and smaller

LCD/LED TV, transportation to and from the SAMSUNG authorized service center is the responsibility of the purchaser.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finishes; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems; brightness related to normal aging, or burnedin images. SAMSUNG does not warrant uninterrupted or error-free operation of the product.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE

LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER

EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY

IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR

A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS

WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS

WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR

CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE

BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR

LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS

OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR

INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL

THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR

SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER

IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD

BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT

LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND

LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND

PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY

ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS

PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE

NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT

EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER

OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR

EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

This warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state.

To obtain warranty service, please contact SAMSUNG at:

Samsung Electronics America, Inc.

85 Challenger Road

Ridgeﬁeld Park, NJ 07660-2112

1-800-SAMSUNG (7267864) – www.samsung.com

1-800-749-0260: Projectors only

English - 32

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Country Web Site Address

CANADA

U.S.A

Customer Care

Center

1-800-SAMSUNG

(726-7864)

1-800-SAMSUNG

(726-7864)

www.samsung.com/ca (English)

www.samsung.com/ca_fr (French)

www.samsung.com

Samsung Electronics Canada Inc., Customer

Service 55 Standish Court Mississauga,

Ontario L5R 4B2 Canada

Samsung Electronics America, Inc. 85

&KDOOHQJHU5RDG5LGJH¿HOG3DUN1-

BN68-04929A-01

QUICK START

GUIDE

Welcome to your new Smart TV!

The following instructions cover assembling, connecting, and setting up your new TV. Make sure you have the accessories listed below.

Included in this box

Remote Control Stand Parts and Cables

Attach the TV to the Stand

Connect video devices

Insert the batteries into the remote control

Step 1 Step 2 Step

Warning: Screens can be damaged from direct pressure when handled incorrectly. We recommend lifting the

TV by the edges, as shown.

BN68-05033A-00

Power on and start the initial setup

Step 4

Smart Touch Control Power cord Cable manager

x 4

IR extender Batteries (AAA x 2) Wall mount adapter

Also included: Cleaning cloth, user manual, regulatory guide,

3D Active Glasses

Stand Mount

Step 1

Attach the TV to the Stand

Lay the TV on a soft surface, screen side down.

Use the packing material to protect the screen.

4 Insert 4 screws and secure the stand to the mount.

x4 (M4 X L12) 40” ~ 55”

x4 (M4 X L10) 60” ~ 65”

REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV

(such as the box).

Put a base and screws off to assemble the stand out of the box.

x 8

Screws

Base

Fit the stand and mount together, making sure the notch on the mount aligns with the stand.

Holding the stand parallel to the screen, slide the stand into the notches on the back of the

TV.

Insert 4 screws and secure the stand to the TV.

x4 (M4 X L12) 40” ~ 55”

x4 (M4 X L10) 60” ~ 65”

Step 2 Connect video devices

We suggest using HDMI connections whenever possible for the best picture quality.

The displayed image may differ depending on the model.

USB Connections

You can connect USB storage devices to the USB jacks and enjoy personal photos, videos, and music.

Best Connection : HDMI

We suggest using HDMI whenever possible.

HDMI 1 is the default port for a cable or satellite set-top box.

Use the other ports for Blu-ray players, game consoles, and other devices.

HDMI Cable

HDMI Port

USB

(5V 0.5A)

USB

(HDD 5V 1A)

USB

(TV CAMERA)

HDMI IN 3 HDMI IN 4

(DVI)

IR OUT HDMI IN 2

(ARC)

HDMI IN 1

(STB)

ANT IN

AIR/CABLE

AUDIO OUT

LAN

COMPONENT

/ AV IN

DIGITAL

AUDIO OUT

(OPTICAL)

EX-LINK

Connect the IR extender to the IR Out port to control external devices connected to the TV using the Smart Touch Control. For more detailed information, refer to the

"Universal Remote Control Setup" section on the User manual.

Power Input

Wired Ethernet

You can connect home theater systems to the OPTICAL or AUDIO

OUT ports.

Good Connection : Component and AV

Match the colors on your device's cables to the colors on the jacks. Connect the yellow composite video out connector from an AV device to the green AV IN jack.

AV also accepts component video connections (red/green/blue).

Connect the cable from the antenna or cable TV outlet.

Step 3 Insert the batteries into the remote control

To open, put your plastic card into the notch.

The AUDIO OUT port can connect to a speaker.

Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are shown below.

Cable Plugs Ports / Jacks

HDMI

USB

Optical

Warning

Do not plug cables in upside down.

Be sure to check the orientation of the plug before plugging it in.

Step 4 Power on and start the initial setup

Information required: t Wi-Fi network password (if you use one) t Zip code t Cable or satellite provider info

The TV must be connected to the Internet to use the Smart Features. If you have a wireless network, we recommend that you confirm that your network router is switched on and working before you start the initial setup. If you have a wired network, we recommend that you connect the TV to the network with a CAT 7 cable before you begin.

Power on to start the initial setup.

Connect to your network (wired or wireless) Search for channels from your TV service provider

Troubleshooting

The stand is wobbly or crooked

Make sure the arrows on the stand are properly aligned.

The TV won’t turn on

Make sure all cables are fully inserted, and that the remote has batteries installed.

My remote, gesture, or voice controls don't work

The TV ships with protective stickers covering some of the sensors. Make sure all of them have been removed.

I have extra parts

The TV includes some optional parts to help with wall mounting and cable routing.

If you experience issues, please do not take the TV back to the store.

In the United States of America, call us at

1-800-SAMSUNG (1-800-726-7864) or visit us at www.

samsung.com/spsn for support and warranty service.

For other countries, refer to "Contact SAMSUNG

WORLDWIDE" in the user guide.

After you have finished the initial setup, you can configure the universal remote control settings.

These settings let the Smart Touch remote control external devices connected to the TV, such as a set-top box or Blu-ray player.

Congratulations on your new Smart TV!

IMPORTANT SAFETY PRECAUTIONS

• Placing the television on a platform, stand, cabinet, table or other surface which is:

recommended by Samsung or sold with the product;

secure and stable;

sufficiently wider in the base than the base measurement of the television; strong and large enough to support the size and weight of the television.

• Positioning the television close to the wall to avoid the possibility of the television falling when pushed.

• Ensuring your television is installed by an authorized Samsung installer.

• Following the instructions for wall mount1ng in the installation manual and using the mounting equipment supplied by Samsung.

• Placing the television toward the back of the furniture or surface on which it is placed.

• Ensuring that the television does not hang over the edge of the furniture or surface on which it is placed.

• Not hanging anything from or on the television.

• Anchoring both the television and the furniture on which it is placed to a suitable support especially in the case of tall furniture, such as

• cupboards or bookcases which exceed one metre in height. This can be done by using sturdy brackets, safety straps or mounts that are made specifically for flat screen televisions.

• Not placing any material between the television and the furniture on wh1ch it is placed.

• If the furniture on which the television is placed has drawers, cabinets or shelves under the television, taking steps to prevent children from climbing, such as installing safety latches so the doors cannot be opened.

• Keeping pets away from the television

• Educating children about the dangers of climb1ng on furniture to reach the telev1sion or its control.

Failure to take these safety precautions may cause the television to fall from the stand or mounting equipment, causing damage or serious injury.

Regulatory Compliance Statements

Feder a l C o mmunic a ti o ns C o mmis s ion ( FCC) USA

Industry Canada Equipment Standard for Digital Equipment ( ICES-003) Canada

- Voluntary Control Council for Interference (VCCI) - Japan

Bureau of Standard s Metrology and In s pection (BSMI) Ta iw an

Kore a Communi c ati o ns Comm i ssion(KCC) - Republic of Korea

It a lian Post Min i stry (H o mol o gat i on) Italy

FCC Class A Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device ma y not cause harmful i nterference, and

2 . Thi s de v i c e mu s t acc ept a n y interfe r en ce r e ce i ved , in c lu di ng int e rferen c e th a t m a y cause undes i r ed o peration .

~ T hi s eq uipm e nt h as bee n te s t e d and fo un d t o co mpl y with t he l i mits for a C l ass A digit a l devi ce, p ur suant t o P a rt 15 o f the FCC Rul es.

T h ese limit s ar e d es ign e d t o pr o vid e r e a s on a bl e pr o t ec ti on a g a in st harmful in te rf ere n ce w he n th e eq ui pme nt is ope r a t e d in a com m e r c i a l e n vi r o nm e nt. T hi s e quipm e nt ge n e r ates, u ses, a n d ca n r ad i a t e r a di o fr eq u e n cy energ y a nd , i f n o t in sta ll ed a nd u se d in accorda n c e with the instruction manu a l , may cause harmful interference to radio communications . Operation of this equi p ment in a resid e ntial a re a is likely to cause harmful interferen c e in whi c h case the user will b e r equired to cor re ct the interference at h is own exp e n se .

FCC Class 8 Notice

This device complies with part 15 of the FCC Rules . Operation is subject to the following two conditions:

1. Thi s dev i ce m a y n o t cause h a rmful i nt e rf e r e n ce , and

2. Thi s devi c e mu s t acc ept a ny int e rf ere n ce r ece ived, in cl ud i ng i n t e rf e r e n ce th a t m a y ca u se und es ir ed o p e ratio n .

~ This equipment has been tested and f ound to comp ly wit h the limits for a C l as s B digital de v ice , pur s u a nt to Part 1 5 o f th e FC C

Rul es . Th ese limit s a r e de s ign e d to p rov id e r e a s on a ble p rotec ti o n ag a in s t h ar mfu l interference in a r es i d ential install a tion. This equipment gener at e s , u s es a nd c a n ra diate radio frequ e n cy e nerg y and, i f n o t i n sta ll e d and u s ed i n acco rd a n ce with t he i n s t r u c ti o n s, m ay ca u se h a rm fu l i n t e rf e r e n ce t o r ad i o co mmuni ca ti ons. Ho w e v e r, th e r e is n o g u a r a nt ee th a t int erfe r ence will n o t occ ur i n a pa rti c ul ar in s t a ll a ti o n . If thi s e quipm e nt d oes ca u se h a rm f ul i nt e rf e r ence t o ra di o o r tel ev i s i o n r ecep ti on, whi c h ca n b e d e t erm i n ed by turni ng th e equipment o ff a nd on , th e u se r i s e n co ur age d t o try t o co rr ec t th e i n t e rf e r e n ce b y o n e or mo r e o f th e f o ll o wi ng meas ur es :

Reo ri ent or r e l oca t e th e r ece i v in g a nt enna .

In c r e a se th e s ep a r a ti o n between the equipm e nt and re ce i ve r .

Co nn ec t th e e qu ip men t int o a n outlet o n a c ir c uit differe nt f ro m t h a t t o whi c h th e rece i ve r i s co nn ec t ed.

Cons ult th e d ea l e r o r a n ex p e ri e nced rad i o /TV t ec hnici a n f or h elp.

User Information

C h a n ges o r mo di fica ti o n s n o t express ly app r ove d by t h e pa rt y respo n s ibl e f o r co m p li a n ce co ul d vo id t h e u ser's a uth ori t y to operate the equ i pm e nt. If nece s s ary, co n s ult with y ou r d e a ler o r an e x perien ced radi o/ televi s i on technic ian f o r a dditi o n a sugges ti o n s. You may fi n d the boo kl e t ca ll e d H o w to I de nti fy a nd R esolve Rad i o /TV Interfe rence P r o bl e m s h e lp f ul. Th is boo kl e t w as pr epa r ed by the Fed e r a l Communica ti o n s

Co m m i ss i o n . It i s ava il a bl e fr o m th e U .S. Gove rnm e nt P r intin g Off i ce . W as hin g t o n , D C 20402, S t oc k Num ber 004-0 00-00 345-4 .

The party responsible for product compliance:

S AM S UN G E LE C T RO NI CS CO., L T D .

America QA L ab o f Sams un g

335 1 Mi c h e l so n Dri ve

S uit e # 2 90, Irvine , CA926 1 2 USA

Warning

U ser mu st u se s h ie l ded s i gnal int e rf ac e ca bl es to m a int a i n FCC co m p li ance fo r th e prod u c t. P r ov i ded wi t h t h i s m o ni to r i s a de t achab l e power s upp l y co r d w ith I EC320 s t y l e t erm i na ti ons. It m ay be sui t ab l e for c o nn ec ti on to a n y U L Li s t ed persona l comp u t e r wi th si mi l ar co nfi g urati o n. Bef o r e m ak in g the co nn ec ti o n, m a k e s ur e th e voltage r a ting of th e com put e r co n ve ni e n ce ou tl e t i s th e sa m e as the moni t o r a nd th a t th e a m pe r e r a tin g o f th e co m p ut e r co nv e ni e n ce o utl e t i s equa l o r exceeds t h e m o nit o r v o lt age r at i ng. For 1 2 0 V o l t a p pl i ca ti o n s, u se o nl y UL Lis t ed de t ac h ab l e po w e r co r d with N E M A con fi g u ra ti o n 51 5 P t ype( p ara ll e l b l a d es ) p lu g cap. For 2 4 0 V o lt app li ca ti o n s u se o nl y UL Li s t e d d e t ac h a bl e p o w e r s up p l y co r d with NEM A config ur at i o n 6 1 5 P t ype ( t a nd e m b l ades ) p l ug cap. T hi s t e l ev i s i o n rece i ve r prov i des di sp l ay o f t e l ev i s i o n c l ose d cap ti o nin g in accorda n ce w ith Sec ti o n 1 5.

1 19 of th e FCC rul es . (TV broadcast r ece i vers with p i c tur e sc r eens 1 3 in c h es o r la r ge r i n d i ameter models on l y )

/CES-003 Class A Notice -Avis NMB-003, C/asse A

This Cla ss A digital apparatus c omp l ies with Canadian ICES-00 3 .

Cet app a reil numerique de Ia classe A est conforme a

Ia n orme NMB-003 d u C anada.

ICES-003 Class B Notice -Avis NMB-003, C/asse B

This Class B d i gital apparatus comp l ies with Canadian ICES-003.

C e t appar ei l numerique de Ia cl a sse B est conform e a

I a norm e NMB-003 du Ca n a d a .

VCCI Class A Notice

;: Cl)~Th[lj:, ? 7 A. A tUIH~f.tij~@:~9 o

;::, Cl)~@: ~*j}!~l:Jt~fj!:FFJ9..@ C ~i~9Ji~~ ~~;::, 9;::, C fJ(~

L) *9

;: Cl)~.g.~=lj:il:FFJ~tJ{iiJil;J]t.j~~ ~~9..@ J:? ~* n..@;: .t tJ{~ LJ *9

VCCI Class B Notice

;: Cl)~@:lj:,

;: Cl)~ @: lj:, *l}!~l:Jt~il:FFJ9..@;: n..@ .t,

? 7 A B

~i~ll!~~sl fUIH~tf.j~@:~9

.t ~ .t L-

-c l '*9fJ{, ;: Cl)~@:fJ{7 :/>t~-T

.t tJ{~ LJ *9

0 lfl(j.Jk~Bjj:J:I=V£-::>"'C:iE l-l'lfl1 L)j.Jkl'~ l."'Cl'~ l' o v t · :/

:/~i~~t!U=ilH~ L-c il:FFJ ~

CCC Class A notice - China

~~AmF~. ~~~~~$. ~F~~-~~-~~~~tt .

~~Mffl~l'. ~··~m~~X~tt*UW~~fi~m~ .

BSMI Class A Notice

The following statement is applicable to products shipped to Taiwan and mark e d as Class A on th e product compliance label.

!35fff!ff}ff

~~~••m•~~ · rr@tt•~~~m~·~~@~~~~~~·tt~M M ~~·

~m~•*~*~~~®~=~~• ·

BSMI Class A

Notice

Products with the CE marking c ompl y with the EMC Dir ective (2004 / 1 08 / E C) an d the Low V ol t age

D i rective(2006 /95/ EC) issued by the Co mmission of the Eur o pean Commun i t y .

E N 55 0 22: Ra dio F r e qu e n c y Int e rf e r e n ce

Co mpli a n ce with t h ese dir ec tiv e s im plies co nf o rmit y t o t he fo ll o wing Europ ean N o rm s:

- E N 55024 : E l ec trom ag n e t ic Immunity o f In fo r ma ti o n Tec hn o l ogy Eq ui p m en t

E N 61 0 0 0 3 2 : Po w e r Lin e H a rm o ni cs

- EN610003 3 : Voltage Fluctuat i ons

EN 55 013 : R a di o disturb a nc e c h a r acte ri s ti cs of broad cas t r ec eiv e rs and assoc i a ted equip me nt s

E N 55 0 2 0 : E l ec tr o m ag n e ti c immu n ity o f br oadcas t r ece iv e r s a n d assoc i a t ed eq uipm

European Class A Warning

(If th e u se r manu a l dec l a r es the p ro d uc t as C l ass A, f o ll o w i n g s t a t e m ent applies .)

Thi s i s a cl ass A pr o du c t. In a domesti c env i ronment thi s produ c t may c a u se r a di o interferenc e in w h i c h cas e the u se r may be r e quired to t a ke a dequ a te me a sure s.

As 7/7/ (gj.EF~ W-&5-~tJ7txfxHJ

Ol 7 171 ~ ~.Ef!.

§ (AE}) ~A: ~II.f~~ 7 1 7 1 £ Ai It)'oHA:f Ef.

~ Af §A: ~ ~ Ol ~ ~ "?

Qj 'O fAI 7 II::lf2.fO:j , 7 ~ ~ 2.12.1 :AI ~ OiiAi

Af §o ~ ~ ~~ ~ 0 £ ~ LICf.

8 8 7 / 7 / (7f~ ~ -&5-~t!7

/Xf X H)

Ol 7171~ 7~~§(8 8 ) ~A:~Il~~ ~7 171£ A i ~ £ 7~~0i1Ai A~§o~~ ~ ~ ~~ 0 £

~-,::; Lief.

:::

A:I~OiiAi A~§ W 4

Italian Homologation Notice

Q u es t o appa r ecc hi o e fabb ri ca t o i n co nf o rmit a a l D.M.

2 8.08.95 n .548 ed i n pa rti co l a r e a qua nt o spec ifi ca t e n e ll A rt.

2, co m ma 1 .

Q u es t o appa r ecc hi o e f abb ri ca t o n ella U.

E . in co nf o rmit a a l D .M.

28 .

08 .

95 n .

548

Art.

2, c omm a 1 e d a l D.M.26.0

3 .92 A rt.1

F o r p r od u c t s p r od u ce d in co untri es exc ept E ur o p ea n Co mmunit y

Q u es t o ap p a r ecc hi o e f ab bri cato i n co nf o rmit a a l D .

28.

0 8 .

95 n.

548 ed in pa rti cola r e a q u a nt o specifica t e n e ll A rt .2, com m a 1.

Fo r p rodu c t s p r od u ced in E ur opea n Co m m unit y

Q u es t o a ppa recc hi o e fabb ri ca t o ne ll a U.E. in co nf o r m i t a a l D.

M .2

8 .

08.95 n .

548

Art .

2 , co mm a 1 ed a l D.

26 .0

3 .

92 A rt .

Important Safety Instructions (UL Only)

1 . Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings, Install in accordance with the manufacturer's instructions .

8. Do not install near any heat sources such as radiators, hea t registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide b l ade or the third prong are provided for your safety. If the provided p lu g does not fit into your outlet, cons ult an electrician for rep l acement of the obsolete outlet.

1 0. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 . Only use attachments/accessories specified by the manufacturer.

12. Use only with cart, stand, tripod, bracket, or table specif i ed by the manufacturer, or sold with the apparatus. When a cart i s used, use caution when mov i ng the cart/apparatus combination t o avoid injury from tip-o v er .

13. Unplug this apparatus during ligh tning storms or when unused for l o ng periods of tim e .

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, suc h as power supply cord or plug is damaged, liquid ha s been spilled or objects have f a l len 1 nto the apparatus, the apparatus has bee n exposed to rain or moisture, does not operate normally, or has been dropped. expose this

• Ventilation

Do not place the apparatus in a rack or bookcase. Ensure that there is adequate ventilation and that you've followed that manufacturer's instructions for mounting and installat io n.

MPR II Compliance (MPR II applied model only)

Thi s monitor comp l ies with S WEDAC(MP R II) r ecomme ndat ions for reduced e l ectr ic and magnetic fields.

Mercury Statement {LCD Monitor, LCD TV, DLP Projection TV, Projector for USA only)

Contains Mer c ury , Dispose According t o Lo ca l, State or Federal L aws

Wiring the Mains Power Supply Plug(UK Only)

IMPORTANT NOTICE

The mains lead on this equipment is suppl i ed with a moulded p l ug incorporating a fuse. The value of the fu s e is indicated on the p i n face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rati n g must be used.

Never use the plug with the fuse c over omitted if the c over is detachable. If a repla c ement fuse cover is requ i red, it mus t be of t he same colour as the pin face of the plug. R e placement cover s are ava ila ble from your dealer .

If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a p ower point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is n o alternative but to cut off the plug, remove the fuse and then safely d i spose of the plug .

Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible co r d.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

BLUE - NEUTRAL BROWN - LIVE

As these colours may not correspond to the coloured markings i dentifying the terminals in your plug, pro c eed as follows :

The wire c oloured BLUE must be c onne c ted to the termina l m a rked with the letter N or coloured BLUE o r BLACK . Th e wir e c ol o ured

B ROWN must be conne c ted to the t e rminal m a rked with the letter L or co l o ured BROWN or RED.

WARNING:

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE L ETTER E OR BY THE EARTH S Y MBOL

, OR COLOURED GREEN OR GREEN AND YELLOW.

Russia Only - PCT Notice

AB57

MPR II Compliance (MPR II applied model only)

Thi s m o ni tor co m p li es with S W ED A C (MPR II) r eco m me n da ti o n s f or r ed u ced e l ec tri c an d mag n e ti c f i e l ds.

EU Eco-Label (EU Eco-Label applied model only)

Products which have model codes that end in XU are intended for the UK market. Samsung has not applied fo r Ecolabels for products with this specific model code.

*** c*

* \: *

* *

EU')j:,!

Ecolabel

www.ecolabel.eu

Better for the environment. ..

• High Energy Efficiency

• Reduced C0

emissions

• Designed to facilitate repair and recycling

... better for you.

( EU Ecolabel: HU/022/02

SAMSUNG Electr on i cs makes an effort to develop environment-friendly product that minimizing an imp act to environment t h rough whole process from getting raw materials, production, transportation , usage and end-of-l if e disposal by adding 'environment ' on funct i o n , pr i ce, quality, design that were the essence for product development.

Th ese e nvironmental characteristics are endor se d by the award of the European Ec o label ( a l so known as t h e Euro Flower) issu ed by the Europ ea n Commission as approval of the product environmenta l statu s for ene r gy saving, facilities fo r recycling a nd a ho st o f other features. The full list of criteria and more i nformation on the ecolabel can be found at the web-site address: h ttp: // www.ecolabe

l .eu

Recycling Information (Take-back offer)

For re c ycling information for our produ c ts, pl ease c ont ac t th e com pany corres pondin g to your r e gion of r esiden ce.

For tho se who reside in other co untri es , please con t act a nearest lo ca l Samsung d eale r fo r recy c ling inf ormat i on for the produ c t s to be treated in environmenta lly acceptable w ay.

The information of Regional Takeback Schemes ca n be found at Samsung's web-site. http://www .

samsung .

com/recyc ling _compl i a n ce

CIS Only

®

CII1MB011 «He ,QI151 nll1ll.!eBo~ npo.QYK1..1111111» np111MeH51eTc51 B coorsercrs111e c rexHII1YeCKII1M pernaMeHTOM

TaMO>KeHHOro co103a «0 6e3onacHOCTII1 ynaKOBKII1 » 005/2011 111 yKa3biBaer Ha ro, 4TO ynaKOBKa ,QaHHoro npO.QYKTa He npe.QHa3HaYeHa ,[11151 nosropHoro 111Cn011b30BaHII151 111 na.Q118>KII1T yr111111113a1..1111111. YnaKOBKY

,QaHHOro npo,QyKTa 3anpell.!aeTC51 111Cn011b30BaTb ,[11151 xpaH8HII151 nll1ll.!eBO~ npO.QYK1..1111111

Cli!MB011 «nem51 Me6111yca» yKa3blsaer Ha B03MO>KHOCTb yrlilnll13a'-llilll1 ynaKOBKiil . Cli!MBon MO>KeT

6b1Tb AOnOnHeH 0603H8YeHI!I8M M8Tep111ana ynaKOBKiil 8 8111.Qe l..llilcJJpOBOrO

1!1/lilnlil 6yKB8HHOro o6o3Ha4eHI!I51.

®

CIIIMB011 Ke.QeH.QiK O.Qal0'blf-\

Cli!MBon ~anraMaHbl >KOIO

005/2011 rexHII1K811bl~ pernaMeHTiHe ca~Kec ~011.QaHbl11a.Qbl >KaHe OCbl

SHiMHif-1 ~anTaMaCbiH eKiHWi peT na~,Qa11aHyra apH811M8f8HbiH >K<3He >KOIOfa >K8T8TbiHbiH K9pCeTe,Qi.

0Cbl SHiMHif-1 ~anT8M8CbiH a3bl~-ry11iK SHiM.QepiH C810'ay ywiH na~AanaHyfa Tbl~biM C811b1H8,Qbl.

MyMKiHAiriH Kepcere.Qi. Cli!MBOn caHAbl~ KOA >KaHe/HeMece apin

6enrinepi rypiHAeri ~anraMa Marepl!lanbiHblf-\ 6enriciMeH ronbll0'blpblnYbl MYMKiH .

1111111111111111111111111111111111111111111

B N68-04972A-O 1

::J

>.Q)

..cc

:t:::O

:;::..c c..

.!!? t:::

..CC"C

-E

~Ul

(.)

·-

0 a,)

::sen

'I-C..

Cl.~

- E

Q,)o

. C u

.c u ca a,)

C') c

::::l en

Cl) c

... t

0 c.. c..

::::l en

(..) ca

.c E c.,)

C') c

::::l en t:

Cl.

Cl. = l:noo::;t

:::StO en~"-

cam

en'?

- 0 0 ca,

(.).,.....

0 z

1z a:

::J

1w a: w a:

0 len

Screws and Guide stand location

(Except LED ES 8000 and higher)

Product Size Location

LED TV 26"-46"

Screws/

Guide-Stand

Plasma

43"-51"

----- ---

---

Screws(

Guide-Stand

-----

---

LED TV

Plasma TV

LED 55"

Plasma 59"

And larger

.........

Screws/

Guide-Stand

English

Screws and guide stand package is placed in the Styrofoam on top.

Espaiiol

Los tornillos y Guide Stand se encuentran localizados en el Styrofoam superior.

Fran~ais

Les vis et le paquet du guide du support sont places dans Ia mousse de polystyrene sur le dessus.

.•

6. No se ven tod as las Aplicacion es o no funcionan

Resete ar S m a rt Hu b

(H e r ramten t as en I a pag i na princtp al de Smart Hub ~ t gura c i on Reset lnt r od ucir Ia Con t rase na, Ia Co ntr asena Prede te r minada es 0000) i!J .. :. •. 8 ~

•

: d

TV Handling Guide

·I ish

1 you li ft u p a 55" o r l a r ge r TV, your thum d to u c h es the saree n direct l y , yo u

1 m age t h e screen . Sam s u ng recomme n d s yo u l i ft up th e TV as shown i n P I C .

;e l evante u n a TV de 5 5" o mayor , s i e l dedo p ul ga r toea I a panta ll a nte , p ue d e dar'ia r I a pantalla. Sam sung r eco m ienda que l evan t e I a TV

1uestra en I a F I G. ous sou l evez u n te l eviseu r 55 " ou p l us , si votre pouce touche d i re ct e m e n t

. dn , vous pouvez en dommage r l ' e c r an . Sa m s u ng r ecom ma nde v o u s s ou l e v ez t e t elev i se ur, comme i nd i qu e d ans I a photo . r-;;, R

Screen Care Guide

English

Do no t spray clean i ng so l u t o pn d i r ect l y o n to t he TV s c r e en. Spra y t h e so l u t i on on t o a c l ean i ng c l oth f irst, a nd t h e n clean the sc r een .

Espaiiol

No rocie Ia soluc i 6n de l im p ieza d i rectamen te s o b r e I a pant al la del t e l e v i s o r .

Roc i e Ia so l uc i 6n sobre u n p a r'i o de l i mp ie za , y l uego l i m pie I a p a nt a ll a .

Franc;ais

Ne pas pu l ve ri se r I a solut i on de netto yage d i r e n cteme nt sur l'e cran du t ele v i s eu r.

Pu l ve ri ser Ia so l ut i on su r u n c h iffon de netto yaged ' a b o r d , puis net t oyer l ' e c r a n .

Hi there! I've gone through the Samsung 7100 Series LED TV user manual. It covers various features like 3D viewing, Smart Hub, Anynet+, and the Smart Touch Control. I'm ready to help you with any questions regarding setup, operation, or troubleshooting.

Show related prompts

Assistant typing

Assistant terminated

Key features

Immersive 3D viewing experience
Crystal-clear images and vibrant colors
Intuitive Smart Touch Control
Effortless device connectivity
Wide range of entertainment options
Seamless and captivating experience

Frequently asked questions

Refer to the user manual for detailed instructions on connecting your devices to the TV.

Use the number buttons on the remote control to enter the desired channel number.

Press the INFO button on the remote control to display the status and notification banner.

Replace the batteries in the 3D Active Glasses with new AAA batteries.

LED TV

user manual

www.samsung.com/register

Important Safety Instructions

Warning! Important Safety Instructions

Contents

Features of your new TV

Using the Smart Touch Control

Connecting to the TV

Inserting the Batteries (AAA X 2)

Reconnecting the Smart Touch Control

Low Battery Power Warning

Using the touch pad

Changing Channels by Entering Numbers

Numerical Input Guide

Show Status and Notiﬁcation Banner

Recommended

History

Searching

Using the Virtual Remote Control

Changing the Virtual Remote Panel

Change a position of the Virtual Remote Panel

Using the Number Panel

Using the Playback Control Panel

Using the Quick Access Panel

Turning on the TV

Switching Between Video Sources

Universal Remote Setup

Add the External Device

Viewing the e-Manual

Scrolling a Page

Using the Top Icons

Returning to the Home Page

Searching the Index

Searching Pages

Closing the e-Manual

Jumping to a Menu Item

Updating the e-Manual

Connecting to a Network

Network Connection - Wireless

Wireless Network Precautions

Network Security Protocols

Network Connection - Wired

3D Active Glasses

Features

Parts

Replacing the Battery

Pairing 3D Active Glasses

Watching 3D Video

Troubleshooting

Speciﬁcations (Model Number: SSG-5100GB)

What is Remote Support?

How Does it Work?

Troubleshooting

Mounting the TV on the Wall Using the Wall Mount Kit

(Optional)

Installing the Wall Mount Kit

Installing a Wall Mount using the Wall mount adapter

VESA Wall Mount Kit Notes and Speciﬁcations

Assembling the Cable manager

Eco Sensor and Screen Brightness

Maintenance

Providing Proper Ventilation for Your TV

Other Warnings

Securing the TV to the Wall

To Avoid the TV from Falling

Speciﬁcations

Standby mode

Dimensions

Licenses

Warranty Information

Federal Communication Commission

Interference Statement

This Class B digital apparatus complies with Canadian ICES-003.

IMPORTANT WARRANTY INFORMATION

REGARDING TELEVISION FORMAT

VIEWING

Still image warning

Regulatory Compliance Statements

(For 3D Active Glasses)