- Computers & electronics
- Audio & home theatre
- TV set-top boxes
- Satellite antennas
- Dish Network
- DISH 1000.2
- Installation instructions
Dish Network DISH 1000.2 Installation instructions 22 Pages
Dish Network Satellite Television: Uncover a world of entertainment with crystal-clear picture and sound quality. Immerse yourself in hundreds of channels, including premium movie networks, popular sports channels, news, and music stations. With an easy-to-use interface and advanced features like parental controls and DVR capabilities, this satellite TV system caters to your viewing preferences and keeps you connected to your favorite shows and movies.
advertisement
Attention and Warning Symbols
You must be aware of safety when you install and use this system. This guide provides various procedures.
If you do some of these procedures carelessly, you could injure or kill yourself or damage equipment or property. Some other procedures require special attention.
Marks a procedure where the following may happen:
• Personal injury or death may occur.
• Equipment or property may be damaged.
Marks the following issues:
• Important operation or maintenance instructions follow.
• Special attention is required.
Important Safety Instructions
You must keep safety in mind when you install and use the DISH 1000.2. Refer to the safety instructions in the installation instructions that came with your system. In this guide, the following notes tell you when you need to pay special attention:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
Keep the following in mind when you install the DISH 1000.2:
• Before you drill any holes in your building, make sure there are no wires or pipes near the holes.
• Install the equipment in accordance with the local building and electrical codes. If you aren’t sure, call a licensed building inspector or electrician for help.
• Never install the satellite dish near power lines.
• Don’t install the satellite dish on composite materials such as strand, chip, fiber, or particle board unless the fastener attaches securely to a wall stud, rafter, or other foundation material beneath the surface.
Note to Satellite TV System Installer : This reminder is provided to call the satellite TV system installer’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
Installation Instructions
Attention!
These installation instructions are intended for use by qualified professional technicians due to the complexity of the installation and compliance to national/local building and electrical codes.
Overview
These instructions guide you through the installation of a DISH Network DISH 1000.2 antenna, which consists of a reflector assembly and a DISH Pro Plus 1000.2 LNBF. The DISH 1000.2 is capable of receiving digital television signals from three DBS satellite locations: 110°W, 119°W, and 129°W. These instructions cover wall mounting only. For other mounting options (for example, pole mounting, or nonpenetrating mounting), see the Retailer Care Site at retailer.echostar.com.
Installation Considerations
While all DISH Network satellite receivers can be connected to the DISH 1000.2, the following models may not detect and will not support the 129°W location: 1000, 2000, 3000, 4000, 5000, JVC-DVHS (IRR), and the DishPlayer 7100/7200.
This installation supports Legacy receivers, but there must be at least one DISH Pro or DISH Pro Plus receiver in the installation. Legacy receivers are receivers which do not have the DISH Pro or DISH Pro
Plus logo (shown below).
About the System
The DISH Pro Plus 1000.2 LNBF provides reception from the 110°W, 119°W, and 129°W orbital locations, and provides an LNBF input port to receive programming from another satellite. The following
LNBF types can be connected to the LNBF input port: DISH Pro Single, DISH Pro Dual, or DISH
Network bandstacked LNBFs.
The LNBF assembly supports connection of up to three satellite receivers in any of the following combinations:
• Single-cable connection to DISH Pro Plus (dual-tuner) receivers, when each input is used with a DISH
Pro Plus Separator.
• Single-cable connection to DISH Pro receivers.
• Single-cable connection to a Legacy receiver provided that a DISH Pro or DISH Pro Plus receiver is also connected and powered at all times. No DISH Pro Adapter is required.
Page 1
Quick Installation Instructions
Figure 1. DISH 1000.2 Antenna Installation Overview
1. Find Azimuth/Elevation/Skew angles for your location (instructions on page 3 and tables on page 10).
2. Find a location for the dish antenna with a clear line of sight and a sturdy mounting surface (page 3, step 1).
3. Mount the mast, making sure it is absolutely vertical (page 3, steps 2 and 3).
4. Assemble the dish antenna, setting the skew and elevation angles in the process. Use additional skew bolts for skew angles greater than 110 or less than 70 (page 3, steps 4-6).
5. Mount the dish antenna on the mast and point the dish to the azimuth angle (page 4, step 7).
6. Run cables between the dish antenna and the receiver(s), leaving a service loop around the Mast Clamp (page 5, step 1).
7. Using a peaking meter attached to the DPP 1000.2 LNBF P ORT 1 , peak the dish on 119°W using transponder 11 or higher for maximum strength. Tighten all bolts (see Table 1) and re-confirm maximum signal (page 5, steps 2-
5).
Note : The 1000.2 Three-LNBF Bracket with three DP Dual (or DP Single) LNBFs can be used in place of the
Integrated Adapter Bracket and DPP 1000.2 LNBF.
8. Connect the receiver cable(s) to the DPP 1000.2 LNBF P ORT 1 (and P ORT 2 and P ORT 3 , as necessary)
(page 6, step 6) and receiver. Some restrictions apply when connecting Legacy receivers. See page 7.
9. Run Check Switch test and confirm 110°W, 119°W, and 129°W reception (page 6, steps 7-9).
10. Take a software download, if you didn’t already (page 7, step 10).
11. Run a Check Switch test and confirm 110ºW, 119ºW, 129° reception (page 7, step 11).
12. Install additional receiver(s), if necessary (page 7, step 12).
13. If applicable, connect a second satellite dish to the DPP 1000.2 LNBF’s LNB I
N
port (page 8, steps 1-4).
Page 2
Locating the Dish Antenna
Use the Angles Tables starting on page 10 to find the azimuth, elevation, and skew angles using the ZIP code from your location. Write the angles in the space provided below.
Azimuth : Elevation : Skew :
Using these azimuth and elevation angles, find a mounting location for the satellite dish where it can be pointed towards the satellites located at these angles. Use a compass and the azimuth angle to find the direction along the horizon that the dish should be pointed. Then use the elevation angle to find out how high the satellites are in the sky from your location. Make sure nothing blocks the line of sight between the dish and the satellites. Make sure this line of sight will not be blocked by future growth of nearby trees or other foliage. Also make sure your mounting location provides sufficient clearance to rotate the reflector as needed to point toward the satellites.
Assembling and Mounting the Dish
Follow these instructions to assemble the satellite dish, mount it, and point it in the direction of the satellites.
Using the azimuth and elevation angles, find a location for the satellite dish where it can be pointed towards the satellites located at these angles. Make sure nothing blocks the line of sight between the dish and the satellites.
Mount the mast to a solid surface so that the dish antenna cannot move or be bumped out of alignment. Keep in mind that physical and environmental conditions can block your satellite dish’s ability to receive a clear satellite signal. Never mount to a tree or a public utility pole.
Align the top part of the mast so that it is absolutely vertical. If the top part of the mast is off vertical by only a few degrees, it will be difficult or maybe even impossible for you to find the satellites. Take at least two readings with a level, on the upper mast, that are 90 degrees apart from one another (see Figure 1).
Loosen both skew bolts and set the skew by rotating the dish mounting bracket to align the mark with the required angle on the skew scale which you wrote above. Tighten the skew bolts securely. See Table 1 for the required torque values. After the skew is set, do not try to finetune the skew angle when aiming the dish.
Note : If your skew angle is at the extreme ends of the scale (greater than 110 or less than 70), insert nuts and bolts from the hardware pack into the additional skew holes. These additional skew holes provide greater stability to the dish at these extreme angles. See Figure 2.
Page 3
Page 4
Figure 2. Additional skew holes for use with extreme skew angles
Assemble the satellite dish as shown in Figure 1, except do not attach the LNBF at this time.
Note : The Three-LNBF Bracket and three DP Dual (or DP Single) LNBFs can be used instead of the Integrated Adapter Bracket and the DPP 1000.2 LNBF. The Three-LNBF Bracket is not interchangeable with the W-Bracket from the DISH 1000.
Set the elevation by loosening then tilting the dish mounting bracket to align the edge with the required angle on the elevation scale. Tighten the elevation bolts snugly to prevent movement.
Slide the dish assembly down onto the mast. Make sure the pivot bolt rests on the top of the mast and that the mast is fully inserted into the tab. Turn the dish assembly so that it points in the general direction of the satellites, using the azimuth angle you wrote on page 3.
Installing the Receivers
Use the steps below while referring to Figure 1.
Run RG-6 coaxial cables from the DISH 1000.2 antenna to the receiver location(s) using the following cable requirements. Grounding, other devices, and in-home cabling must also meet these requirements.
• RG-6 coaxial cable rated for at least 950 to 2150 MHz must be used in this installation. Do not use existing cables such as RG-59 as it may cause signal loss. Also, be sure that any outdoor connections are made using waterproof F-connectors rated for 2150 MHz or greater.
• The length of the RG-6 cable from any receiver and farthest dish connected in the system must not be longer than:
200 feet for DISH Pro or DISH Pro Plus receivers.
100 feet for Legacy receivers.
• The cable length between the DISH 1000.2 and a connected compatible LNBF must be 80 feet or less.
The cable’s center conductor must not extend past the rim of the F-connector more than the thickness of a nickel.
Tighten all outdoor cable connections up to the torque values recommended by the manufacturer to ensure seal against moisture. Damage caused by over-tightening is not covered by the limited warranty. Tighten all indoor coaxial cable connections to the receiver only by hand. If you use a wrench, you may over-tighten the connections and damage your equipment.
Connect a temporary cable to a peaking meter. Thread the other end of the cable through the
LNBF arm and bracket. Connect the temporary cable to P ORT 1 of the DPP 1000.2 LNBF and attach the LNBF to the bracket with two screws. If using the Three-LNBF bracket and three DP
Dual (or DP Single) LNBFs, connect the temporary cable from the peaking meter to the 119°W
(center) LNBF. Attach the LNBFs to the bracket using the included screws.
Note : If the peaking meter does not produce at least 600 mA to power the DPP 1000.2 LNBF, connect P ORT 2 of the LNBF to the S ATELLITE I N
port of a powered receiver, or temporarily connect the Three-LNBF bracket with a Dual or Single LNBF for peaking on 119°W.
Peak the dish for the strongest possible signal on the 119°W satellite signal using the azimuth and elevation settings you wrote on page 3. Do not adjust the skew.
Note : If you cannot find the 119°W signal, try adjusting the elevation up or down one or two degrees. Ensure you are peaking the dish using transponder 11 or higher.
With the peaking meter still connected, tighten the mast clamp and elevation bolts using the torque values listed in Table 1 on page 6. Re-confirm signal strength after tightening the bolts.
Page 5
Table 1: Torque Values
Location
Mast pivot through bolt (ensure no mast deformation occurs during tightening)
Mast locking nuts
Reflector mounting bolts
Clamp locking bolts
Clamp pivot through bolt (ensure no mast deformation occurs during tightening)
Elevation adjustment locking nuts
Skew adjustment locking nuts
LNB and bracket attachment hardware
Torque Value (ft-lbs unless otherwise noted)
24 in-lbs
12
6
6
24 in-lbs
12
12
Handtight
Remove the temporary cable used for peaking the dish. Thread the cable(s) from the receiver(s) through the LNBF arm and bracket. Connect these cables to P ORT 1 , P ORT 2 and P ORT 3 , as applicable.
Note : If using the Three-LNBF Bracket with DP Dual (or DP Single) LNBFs, refer to the section
Connecting to a Switch on page 9 and the switch’s installation instructions for additional details.
Connect a cable from DPP 1000.2 LNBF P ORT 1 (or P ORT 2 or P ORT 3 ) to a DISH Pro or DISH
Pro Plus (dual-tuner) satellite receiver’s S ATELLITE I N
connection(s). If a Legacy receiver is present, it should be installed last.
To connect DISH Pro Plus (dual-tuner) receivers with a single cable, install a
DISH Pro Plus Separator as follows: a. Connect a cable from the DPP 1000.2 LNBF output ( P ORT 1 , P ORT 2, or
P ORT 3 ) to the DISH Pro Plus Separator Input.
b. Connect cables between the receiver’s S ATELLITE I N 1 and S ATELLITE I N 2 to S ATELLITE I N 1 and S ATELLITE I N 2 respectively on the DISH Pro Plus
Separator.
You must use a DISH Pro Plus Separator in a single-cable/dualtuner receiver installation. A splitter or other device will not work in this configuration.
Tighten all indoor coaxial cable connections to the receiver only by hand. If you use a wrench, you may over-tighten the connections and damage your equipment.
Connect the receiver(s) to the TV(s) and display the Point Dish screen (if not shown, for most receivers, press MENU-6-1-1 on the remote control).
Page 6
From the Point Dish screen, run Check Switch . On Legacy receiver models 2800, 3900, 4900, and 6000, select the SuperDISH Installation-3Sat option prior to running the Check Switch test.
On all other Legacy models, select Test . When the Check Switch procedure finishes, you should see an Installation Summary screen similar to the ones shown below. Make sure the summary screen shows reception from the 119°W, 110°W, and 129°W satellites on all available satellite tuners. Also confirm the LNBF is correctly identified as a DPP 1000.2
(factory software on some models may identify this LNBF as a DPP Twin or DPP Triple , which is OK). Legacy receivers will identify the LNBF as SW64 .
Note : On some models, you might not see signal from 129°W until after you take a software download and run a Check Switch in steps 10 and 11. Legacy receiver models 1000, 2000, 3000,
4000, 5000, 7100, 7200, and JVC-DVHS (IRR) may not detect and will not support the 129°W location.
Note : If you are using the Three-LNBF Bracket, your Installation Summary screen will vary depending on the connected switch. Make sure the summary screen shows reception from the
119°W, 110°W, and 129°W satellites on all available satellite tuners.
DISH Pro/DISH Pro Plus Legacy
Installation Summary Installation Summary
Exit the Installation Summary screen to display the Point Dish/Signal screen. Make sure the signal strength bar is green and locked for the 119°W, 110°W, and 129°W satellites.
Note : You might not see signal from 129°W until after you take a software download and run a
Check Switch in steps 10 and 11.
Exit the Point Dish/Signal screen and follow the on-screen instructions for taking a receiver software download. Do not disturb the receiver during the process of downloading software. If exiting the Point Dish screen does not start the download process, turn off the receiver for at least 20 minutes (on most receivers) to allow the receiver to take a software download.
Run Check Switch again and confirm reception for all three satellites on all available satellite tuners. Your Installation Summary screen should be similar to the ones shown above in step 8.
Some software on some models may identify the DPP 1000.2 LNBF as a DPP 1K.2
. This identification is OK.
If installing an additional receiver, follow steps 6-11. Make sure the summary screen shows reception from the 110°W, 119°W, and 129°W satellites. Keep in mind that a DISH Pro or DISH
Pro Plus receiver must remain connected and powered at all times to power the DPP 1000.2
LNBF.
Page 7
Connecting a Second Satellite Dish
After completing the previous sections to install the DISH 1000.2, use these instructions to add a fourth satellite location from a second dish to the DISH 1000.2. The LNBF from the second dish must be a DISH
Pro Single or DISH Pro Dual looking at a DBS satellite location, or a DISH Network bandstacked LNBF.
Install and peak the second dish antenna using a peaking meter and the instructions that came with that dish antenna. Skip any steps regarding taking a receiver software upgrade since this was done in the previous section of the DISH 1000.2 Installation Instructions.
Run cable from the second dish antenna location to the DISH 1000.2, referring to the cable requirements stated in step 1 on page 5.
Connect the coaxial cable between the LNBF on the second dish and the LNB I N port on the DPP
1000.2 LNBF. Refer to figure 1 on page 2.
From the Point Dish screen (accessed by pressing MENU-6-1-1 on most receivers), run Check
Switch again on all connected receivers. On Legacy receiver models 2800, 3900, 4900, and
6000, select the SuperDISH Installation-4Sat option prior to running the Check Switch test. On all other Legacy models, select Test . When the Check Switch procedure finishes, you should see a summary screen similar to one of those shown below.
The DISH Pro/DISH Pro Plus summary screen below is similar to what should be shown for
DISH Pro and DISH Pro Plus receivers connected to the DISH 1000.2 when a second dish is connected to the LNB I N port. Make sure the summary screen shows reception from the 119°W,
110°W, and 129° satellites and the fourth satellite location on all available satellite tuners. If not, re-peak the DISH 1000.2 or the second dish as needed to achieve the required signal levels.
Confirm the installed LNBF on the second dish is correctly identified.
The Legacy summary screen below is similar to what should be shown for Legacy receiver models 2800, 3900, 4900 or 6000 connected to the DISH 1000.2 when a second dish is connected to the LNB I N
port. Make sure the summary screen shows reception from 110°W,
119°W, 129° satellites and the fourth satellite location on all available satellite tuners. Note that these receivers identify the DISH 1000.2 as SW21 4-Sat in this configuration, which is OK.
Page 8
DISH Pro/DISH Pro Plus Legacy
Installation Summary Installation Summary
Note : Legacy receiver models 1000, 2000, 3000, 4000, 5000, 7100, 7200 and JVC-DVHS (IRR) may not detect and will not support signals from DISH Network bandstacked FSS LNBFs or
129°, and will not support a fourth satellite location connected to the LNB I N port.
Connecting to a Switch
Connecting the DPP 1000.2 LNBF to a DPP44 Switch
The DPP 1000.2 LNBF can be connected to provide
119°W, 110°W and 129°W satellite signals to a DISH
Pro Plus 44 switch. Refer to the instructions provided with the switch for additional considerations and instructions. Signal for a fourth satellite location must be provided directly from the fourth satellite location’s LNBF to the DPP switch. The LNB I N
port on the DPP 1000.2 LNBF must not be connected. In this installation, the DPP 1000.2 LNBF defaults to the following settings:
• P ORT 1 - 119°W
• P ORT 2 - 110°W
• P ORT 3 - 129°W
• LNB I N
- Disabled when DPP 1000.2 LNBF is connected to a switch. When connected to a switch, any LNBF connected to the LNB I N
port must be disconnected from the DPP 1000.2 LNBF and connected directly to the switch.
Note : The DPP 1000.2 LNBF is NOT compatible with DISH Pro switches in any installation.
Connecting three DP Dual (or DP Single) LNBFs to a Switch when using the Three-
LNBF Bracket
When using the Three-LNBF Bracket on the DISH 1000.2 with three DP Dual (or DP Single) LNBFs, the LNBFs must be connected to a switch to provide 119°W, 110°W and 129°W to the installed receivers. Follow the LNBF and switch installation instructions for additional considerations.
Note : Legacy LNBFs and switches can be used with the Three-
LNBF Bracket. Follow all instructions for that equipment if you choose to use Legacy LNBFs and switches.
Page 9
Dish Pointing Angles
ZIP
CODE
RANGE
00038
00039
00040
00044
00047
00048
00049
00050
00025
00028
00031
00032
00033
00034
00035
00037
00051
00052
00054
00055
00007
00008
00010
00011
00013
00019
00020
00022
00001
00002
00003
00004
00006
Page 10
AZ
160
159
157
157
160
157
165
163
163
163
157
157
163
157
160
158
161
161
163
165
163
162
165
157
117
141
116
122
118
121
118
121
122
Use the tables below as follows:
1. Find the ZIP code for your location.
2. Find the row that contains the ZIP code or the first three digits of the ZIP code. For example, the correct row for ZIP code 80112 is 801XX.
3. Write down the number in the AZ column in the “Azimuth” blank on page 3.
4. Write down the number in the EL column in the “Elevation” blank on page 3
5. Write down the number in the SK column in the “Skew” blank on page 3.
.
EL
43
43
41
41
42
42
45
44
44
44
41
41
43
41
41
42
41
43
47
48
44
42
45
43
9
26
11
17
15
12
17
16
15
SK
128
131
131
130
127
127
127
126
126
127
127
127
126
128
126
126
130
130
113
128
126
127
126
130
127
125
126
90
88
139
142
128
130
17
26
27
27
18
19
19
17
27
21
28
17
17
19
19
19
18
18
18
18
19
18
18
43
42
17
19
45
43
36
38
44
43
87
86
85
85
87
86
90
90
89
89
85
86
89
86
88
86
89
88
88
89
89
89
90
85
78
83
71
74
71
78
69
73
76
260
248
246
246
259
256
256
259
259
259
255
256
256
259
257
258
246
254
216
259
254
258
257
224
221
257
256
165
162
243
243
221
224
ZIP
CODE
RANGE
00141
00145
00147
00148
00151
00152
00155
00156
00133
00134
00135
00136
00137
00138
00139
00140
00157
00159
00160
00120
00124
00125
00126
00127
00128
00130
00132
00058
00065
00087
00097
00116
00119
AZ EL SK AZ EL SK
122
180
179
183
254
254
254
154
167
166
254
254
213
213
254
255
255
254
255
255
255
254
255
255
255
255
214
205
207
207
255
255
254
16
50
51
50
20
20
20
36
47
46
20
20
49
49
20
20
20
20
20
20
20
20
20
20
20
20
29
20
20
20
28
29
29
75
100
100
103
126
126
126
86
91
91
126
126
125
124
127
127
127
127
127
127
127
127
127
127
127
127
113
109
110
110
127
127
126
ZIP
CODE
RANGE
00190
00191
00192
00195
00198
00199
00200
00201
00203
00205
00182
00183
00184
00185
00186
00187
00188
00189
00172
00173
00174
00176
00177
00179
00180
00181
00161
00164
00165
00166
00168
00169
00170
ZIP
CODE
RANGE
00257
00258
00259
00260
00266
00267
00268
00270
00236
00238
00241
00243
00246
00250
00252
00255
00276
00277
00278
00279
00280
00281
00282
00283
00222
00223
00225
00226
00228
00229
00232
00234
00206
00214
00215
00216
00217
00218
00219
AZ
178
158
161
159
156
158
159
158
175
190
191
206
168
222
213
227
163
177
178
238
177
159
158
177
244
240
240
244
240
243
243
244
167
165
165
166
167
161
191
EL
42
33
36
36
38
38
40
37
34
45
48
43
39
42
28
41
44
40
40
27
37
33
38
37
37
36
38
37
36
37
36
38
49
47
43
42
48
49
49
SK
99
88
90
89
86
87
87
88
97
107
108
116
93
128
112
130
89
99
99
125
98
89
87
98
142
137
139
141
137
141
139
142
90
89
89
90
91
88
107
ZIP
CODE
RANGE
023XX
024XX
025XX
026XX
027XX
028XX
029XX
030XX
015XX
016XX
017XX
018XX
019XX
020XX
021XX
022XX
031XX
032XX
033XX
034XX
035XX
036XX
037XX
038XX
007XX
008XX
009XX
010XX
011XX
012XX
013XX
014XX
00284
00285
00286
00401
00501
00544
006XX
AZ
254
254
254
254
255
255
255
256
255
255
255
255
253
253
254
254
254
252
253
254
254
254
254
252
252
251
252
253
268
270
268
252
252
250
245
250
252
252
268
EL
21
22
22
21
21
21
21
21
21
21
21
21
22
22
21
21
20
21
21
20
21
21
21
21
22
22
22
21
27
26
27
22
24
23
23
27
20
24
30
SK
129
129
129
128
129
129
130
130
129
129
129
129
129
129
129
129
127
128
127
128
128
127
128
128
128
128
128
128
157
158
157
128
126
129
133
129
130
130
157
ZIP
CODE
RANGE
062XX
063XX
064XX
065XX
066XX
067XX
068XX
069XX
054XX
055XX
056XX
057XX
058XX
059XX
060XX
061XX
070XX
071XX
072XX
073XX
074XX
075XX
076XX
077XX
046XX
047XX
048XX
049XX
050XX
051XX
052XX
053XX
039XX
040XX
041XX
042XX
043XX
044XX
045XX
AZ
251
251
251
250
253
253
252
251
253
254
251
251
252
254
252
251
249
250
250
250
250
250
250
250
253
252
251
252
259
259
258
257
255
255
256
255
257
259
256
EL SK
129
129
129
129
129
129
129
129
126
126
129
129
126
129
126
127
129
129
129
129
129
129
129
129
127
127
127
128
128
126
128
127
128
128
128
127
128
127
128
Page 11
23
23
23
23
22
22
23
23
20
20
22
22
21
21
21
22
24
24
24
24
24
24
24
24
21
22
22
22
18
17
19
19
20
19
18
19
20
20
20
ZIP
CODE
RANGE
111XX
112XX
113XX
114XX
115XX
116XX
117XX
118XX
103XX
104XX
105XX
106XX
107XX
108XX
109XX
110XX
119XX
120XX
121XX
122XX
123XX
124XX
125XX
126XX
085XX
086XX
087XX
088XX
089XX
100XX
101XX
102XX
078XX
079XX
080XX
081XX
082XX
083XX
084XX
Page 12
AZ
250
250
250
250
250
250
250
250
250
250
252
250
250
250
250
250
250
249
250
249
252
250
250
250
248
250
250
250
248
248
249
248
248
249
248
248
249
248
249
24
24
23
24
24
24
24
24
24
24
24
24
24
24
23
24
23
23
23
23
23
23
23
23
24
24
24
24
25
25
24
24
25
25
25
25
24
24
25
EL SK
129
129
129
129
129
129
129
129
129
129
129
129
129
129
129
129
127
128
128
128
130
127
127
127
129
129
129
129
129
129
130
129
129
129
130
129
130
130
130
ZIP
CODE
RANGE
150XX
151XX
152XX
153XX
154XX
155XX
156XX
157XX
142XX
143XX
144XX
145XX
146XX
147XX
148XX
149XX
158XX
159XX
160XX
161XX
162XX
163XX
164XX
165XX
134XX
135XX
136XX
137XX
138XX
139XX
140XX
141XX
127XX
128XX
129XX
130XX
131XX
132XX
133XX
AZ
240
241
240
241
239
239
239
239
243
241
244
244
241
241
243
243
240
240
238
238
241
241
239
238
246
246
241
241
247
247
248
247
249
250
250
246
245
246
247
EL
28
28
28
27
28
28
28
28
25
26
25
25
26
26
25
25
27
27
27
27
27
27
28
28
24
24
26
26
23
23
23
24
24
24
24
23
24
22
22
SK
127
127
127
126
126
126
126
126
125
125
126
126
125
124
125
125
126
125
125
125
126
127
126
125
127
127
125
125
126
126
125
127
128
127
125
126
126
126
126
ZIP
CODE
RANGE
189XX
190XX
191XX
192XX
193XX
194XX
195XX
196XX
181XX
182XX
183XX
184XX
185XX
186XX
187XX
188XX
197XX
198XX
199XX
200XX
201XX
202XX
203XX
204XX
173XX
174XX
175XX
176XX
177XX
178XX
179XX
180XX
166XX
167XX
168XX
169XX
170XX
171XX
172XX
AZ
247
248
246
246
248
248
248
248
247
247
247
246
247
247
247
247
244
245
245
245
247
247
247
245
245
245
246
247
244
245
246
246
242
242
243
244
244
244
244
EL
26
25
25
25
25
25
25
25
25
25
25
25
25
25
24
24
27
27
27
27
26
26
26
27
26
26
25
25
26
26
26
26
25
26
26
27
27
26
26
SK
129
129
128
129
129
129
129
129
128
128
128
127
129
128
128
128
129
129
129
129
129
129
130
129
127
128
128
128
128
128
129
129
127
126
127
126
128
128
128
ZIP
CODE
RANGE
229XX
230XX
231XX
232XX
233XX
234XX
235XX
236XX
221XX
222XX
223XX
224XX
225XX
226XX
227XX
228XX
237XX
238XX
239XX
240XX
241XX
242XX
243XX
244XX
212XX
214XX
215XX
216XX
217XX
218XX
219XX
220XX
205XX
206XX
207XX
208XX
209XX
210XX
211XX
AZ
247
247
247
246
242
245
245
244
245
243
243
241
244
245
245
245
240
236
238
241
247
245
243
240
244
248
247
244
245
245
242
247
245
245
245
245
245
245
245
EL
27
27
28
28
29
28
28
28
28
28
28
28
27
27
27
28
30
32
31
29
28
28
29
30
27
26
26
27
26
27
28
26
27
27
26
26
27
27
27
SK
131
132
132
132
129
131
131
130
130
129
129
129
129
129
129
130
129
128
129
129
132
131
130
129
129
131
129
129
129
130
128
130
129
130
129
129
129
129
129
ZIP
CODE
RANGE
268XX
270XX
271XX
272XX
273XX
274XX
275XX
276XX
260XX
261XX
262XX
263XX
264XX
265XX
266XX
267XX
277XX
278XX
279XX
280XX
281XX
282XX
283XX
284XX
252XX
253XX
254XX
255XX
256XX
257XX
258XX
259XX
245XX
246XX
247XX
248XX
249XX
250XX
251XX
AZ
241
241
242
242
241
239
239
241
238
239
238
241
238
237
239
238
239
238
242
244
242
244
246
238
236
235
237
238
237
237
243
235
241
236
238
237
239
237
237
EL
31
31
30
30
28
31
31
31
29
29
30
28
29
30
29
29
32
32
31
31
30
29
28
32
31
31
31
30
30
30
27
31
31
30
30
30
30
31
31
SK
131
131
132
132
128
130
130
131
127
127
128
128
126
127
128
127
131
131
132
133
131
132
133
131
127
127
128
128
127
127
128
127
130
128
128
128
128
127
127
ZIP
CODE
RANGE
308XX
309XX
310XX
311XX
312XX
313XX
314XX
315XX
300XX
301XX
302XX
303XX
304XX
305XX
306XX
307XX
316XX
317XX
318XX
319XX
320XX
321XX
322XX
323XX
292XX
293XX
294XX
295XX
296XX
297XX
298XX
299XX
285XX
286XX
287XX
288XX
289XX
290XX
291XX
AZ
235
239
239
238
237
237
235
233
238
234
235
231
233
232
233
233
239
240
240
235
237
235
233
233
236
238
238
240
239
237
241
242
245
237
235
235
233
239
239
EL SK
131
134
134
134
132
132
132
130
133
130
131
128
130
129
130
130
135
137
136
134
134
133
131
131
130
131
132
134
132
130
134
133
133
130
129
129
129
132
132
Page 13
35
34
34
35
34
34
36
35
35
34
35
35
35
36
36
35
36
36
36
38
36
37
36
37
34
32
34
34
33
33
33
32
33
34
33
33
29
32
33
ZIP
CODE
RANGE
352XX
354XX
355XX
356XX
357XX
358XX
359XX
360XX
339XX
342XX
344XX
346XX
347XX
349XX
350XX
351XX
361XX
362XX
363XX
364XX
365XX
366XX
367XX
368XX
331XX
332XX
333XX
334XX
335XX
336XX
337XX
338XX
324XX
325XX
326XX
327XX
328XX
329XX
330XX
Page 14
AZ
229
229
230
231
228
227
227
227
240
244
228
228
241
240
239
239
228
228
228
232
230
230
232
229
240
240
239
241
244
244
244
244
233
230
239
241
241
243
244
36
36
36
38
37
38
37
37
37
36
37
37
38
38
37
38
40
40
38
37
38
36
38
39
37
38
38
37
37
37
37
37
36
36
36
37
38
40
37
EL SK
127
127
128
130
128
128
127
127
138
140
128
128
140
138
137
137
130
130
129
130
130
129
132
130
138
138
138
138
142
142
141
141
133
131
136
138
138
139
142
ZIP
CODE
RANGE
392XX
393XX
394XX
395XX
396XX
397XX
399XX
400XX
384XX
385XX
386XX
387XX
388XX
389XX
390XX
391XX
401XX
402XX
403XX
404XX
405XX
406XX
407XX
408XX
376XX
377XX
378XX
379XX
380XX
381XX
382XX
383XX
369XX
370XX
371XX
372XX
373XX
374XX
375XX
AZ
223
225
233
230
223
226
225
226
225
222
223
223
226
230
222
222
231
230
232
234
228
228
232
231
223
222
223
224
236
233
233
233
227
227
228
228
231
231
222
EL
41
39
35
33
40
39
41
41
38
39
40
40
36
34
38
40
32
33
33
32
34
33
32
33
37
38
36
37
32
33
33
34
35
35
35
38
39
35
35
SK
127
127
130
125
127
128
129
130
126
125
127
127
126
127
125
125
126
125
127
128
125
125
126
126
124
124
124
125
129
128
128
128
129
126
126
126
128
128
124
ZIP
CODE
RANGE
435XX
436XX
437XX
438XX
439XX
440XX
441XX
442XX
425XX
426XX
427XX
430XX
431XX
432XX
433XX
434XX
443XX
444XX
445XX
446XX
447XX
448XX
449XX
450XX
416XX
417XX
418XX
420XX
421XX
422XX
423XX
424XX
409XX
410XX
411XX
412XX
413XX
414XX
415XX
AZ
237
236
236
236
231
232
236
235
234
233
233
234
231
231
229
233
237
234
234
231
236
237
238
237
229
227
226
225
235
234
234
224
233
232
234
235
233
233
235
EL
29
28
28
28
30
29
29
29
30
30
30
29
33
34
34
30
29
29
29
31
28
28
28
29
34
35
34
35
32
32
32
36
31
32
32
31
33
32
31
SK
126
124
124
125
123
123
126
125
125
125
124
123
126
127
125
125
125
124
124
124
125
125
125
125
126
125
124
124
127
127
127
124
127
125
126
127
127
127
128
ZIP
CODE
RANGE
474XX
475XX
476XX
477XX
478XX
479XX
480XX
481XX
466XX
467XX
468XX
469XX
470XX
471XX
472XX
473XX
482XX
483XX
484XX
485XX
486XX
487XX
488XX
489XX
458XX
459XX
460XX
461XX
462XX
463XX
464XX
465XX
451XX
452XX
453XX
454XX
455XX
456XX
457XX
AZ
225
226
233
232
227
226
226
225
230
228
228
229
227
228
228
228
230
232
230
230
233
233
232
232
227
225
225
227
231
231
227
227
232
231
231
231
231
234
236
EL
33
32
28
29
33
34
34
34
32
33
32
31
31
31
31
31
28
28
29
29
28
28
28
28
32
31
31
31
30
32
32
32
31
31
31
30
31
32
31
SK
122
122
122
122
123
123
123
123
124
124
124
123
121
122
122
122
120
121
121
121
123
122
122
122
123
121
120
121
123
125
123
123
125
125
124
124
124
126
126
ZIP
CODE
RANGE
513XX
514XX
515XX
516XX
520XX
521XX
522XX
523XX
505XX
506XX
507XX
508XX
509XX
510XX
511XX
512XX
524XX
525XX
526XX
527XX
528XX
530XX
531XX
532XX
497XX
498XX
499XX
500XX
501XX
502XX
503XX
504XX
490XX
491XX
492XX
493XX
494XX
495XX
496XX
AZ
217
215
216
216
208
208
208
209
211
206
206
206
210
213
215
210
218
222
222
222
216
214
216
218
212
211
211
212
230
224
221
211
228
227
231
228
226
228
227
EL
33
32
33
33
34
35
36
36
35
35
35
34
34
33
33
36
33
30
31
31
33
35
34
33
34
34
35
33
27
28
28
35
29
30
29
28
30
31
29
SK
117
116
117
117
113
114
114
115
116
113
113
112
114
116
116
115
118
118
119
119
117
117
118
118
116
116
116
115
119
117
115
115
121
121
122
120
120
120
119
ZIP
CODE
RANGE
559XX
560XX
561XX
562XX
563XX
564XX
565XX
566XX
550XX
551XX
553XX
554XX
555XX
556XX
557XX
558XX
567XX
570XX
571XX
572XX
573XX
574XX
575XX
576XX
542XX
543XX
544XX
545XX
546XX
547XX
548XX
549XX
534XX
535XX
537XX
538XX
539XX
540XX
541XX
AZ
208
208
204
208
214
210
207
206
210
216
212
213
212
211
210
211
202
199
197
194
203
204
205
204
217
215
215
221
223
223
218
218
224
219
220
217
219
213
222
EL SK
112
111
110
111
115
114
112
112
113
113
112
113
114
113
113
113
110
109
108
107
109
111
112
110
116
115
114
117
118
117
116
115
119
118
118
117
117
114
117
Page 15
31
31
31
29
32
33
33
32
32
28
29
29
31
31
32
31
35
33
35
34
30
34
34
33
31
31
30
30
29
29
30
29
32
31
31
29
31
32
31
ZIP
CODE
RANGE
603XX
604XX
605XX
606XX
607XX
609XX
610XX
611XX
595XX
596XX
597XX
598XX
599XX
600XX
601XX
602XX
612XX
613XX
614XX
615XX
616XX
617XX
618XX
619XX
586XX
587XX
588XX
590XX
591XX
592XX
593XX
594XX
577XX
580XX
581XX
582XX
583XX
584XX
585XX
Page 16
AZ
223
223
220
220
223
223
223
223
169
223
223
223
177
174
174
170
221
222
224
223
218
221
219
220
181
185
186
175
191
193
189
181
191
202
203
201
198
199
194
31
32
32
32
31
32
32
31
34
31
32
31
33
35
36
35
33
33
33
33
33
33
34
33
36
32
34
34
33
31
32
35
30
31
32
33
36
31
31
EL SK
120
121
118
119
120
120
120
120
94
119
119
120
99
97
97
95
119
120
121
121
118
119
119
119
100
102
103
97
105
105
103
100
106
109
109
108
107
108
106
ZIP
CODE
RANGE
647XX
648XX
649XX
650XX
651XX
652XX
653XX
654XX
637XX
638XX
639XX
640XX
641XX
644XX
645XX
646XX
655XX
656XX
657XX
658XX
660XX
661XX
662XX
664XX
628XX
629XX
630XX
631XX
633XX
634XX
635XX
636XX
620XX
622XX
623XX
624XX
625XX
626XX
627XX
AZ
216
215
213
217
211
212
211
216
211
210
210
212
221
222
220
212
210
210
210
207
217
214
215
214
218
216
214
219
223
223
219
220
220
221
217
223
222
220
220
EL
37
36
37
37
38
39
37
37
37
36
37
36
36
37
37
37
38
37
37
38
37
38
38
38
36
35
35
36
35
36
36
35
34
34
34
34
35
35
35
SK
119
119
118
120
118
119
117
119
117
116
116
117
122
123
122
117
116
117
117
115
120
120
120
119
120
118
117
121
122
123
121
121
121
121
119
122
121
120
120
ZIP
CODE
RANGE
689XX
690XX
691XX
692XX
693XX
700XX
701XX
703XX
680XX
681XX
683XX
684XX
685XX
686XX
687XX
688XX
704XX
705XX
706XX
707XX
708XX
710XX
711XX
712XX
672XX
673XX
674XX
675XX
676XX
677XX
678XX
679XX
665XX
666XX
667XX
668XX
669XX
670XX
671XX
AZ
192
225
225
223
201
198
196
197
206
204
203
201
206
207
206
206
222
217
216
220
224
220
219
222
201
198
199
198
206
209
205
202
207
209
211
208
204
205
205
EL
38
42
42
43
38
39
38
37
37
36
36
37
36
36
37
37
42
42
42
41
42
43
44
42
39
40
41
42
40
39
39
40
39
38
40
40
38
38
39
SK
107
129
129
129
112
110
109
109
114
112
112
111
113
114
114
114
128
124
123
125
129
127
126
128
112
110
112
111
115
117
114
113
115
116
117
116
113
115
115
ZIP
CODE
RANGE
738XX
739XX
740XX
741XX
743XX
744XX
745XX
746XX
729XX
730XX
731XX
733XX
734XX
735XX
736XX
737XX
747XX
748XX
749XX
750XX
751XX
752XX
753XX
754XX
721XX
722XX
723XX
724XX
725XX
726XX
727XX
728XX
713XX
714XX
716XX
717XX
718XX
719XX
720XX
AZ
211
211
211
208
202
198
209
209
209
206
203
205
213
207
207
210
211
210
210
211
212
209
213
210
218
215
213
215
218
218
221
220
220
218
219
217
215
216
218
EL
40
41
42
41
42
42
41
41
43
43
43
41
40
42
42
47
44
44
44
43
42
42
41
44
38
39
40
40
39
40
38
38
41
41
41
39
42
43
40
SK
118
119
119
116
114
112
117
118
118
116
115
115
120
117
117
121
120
120
120
120
120
118
120
120
122
121
120
121
123
122
124
123
126
125
124
123
122
122
123
ZIP
CODE
RANGE
779XX
780XX
781XX
782XX
783XX
784XX
785XX
786XX
770XX
772XX
773XX
774XX
775XX
776XX
777XX
778XX
787XX
788XX
789XX
790XX
791XX
792XX
793XX
794XX
762XX
763XX
764XX
765XX
766XX
767XX
768XX
769XX
755XX
756XX
757XX
758XX
759XX
760XX
761XX
AZ
212
213
213
210
212
209
210
209
216
217
217
213
215
215
215
214
199
202
199
200
210
206
212
199
210
210
206
204
208
206
207
210
214
215
213
213
216
209
209
EL
49
49
50
47
47
48
48
48
46
45
45
46
46
46
45
46
44
44
46
46
47
49
46
44
45
45
47
47
44
44
45
46
44
44
44
44
42
43
44
SK
124
124
125
121
123
121
122
121
125
125
125
122
124
124
124
124
112
114
113
113
121
119
123
113
121
121
118
117
119
117
118
121
122
122
122
122
124
119
119
ZIP
CODE
RANGE
821XX
822XX
823XX
824XX
825XX
826XX
827XX
828XX
810XX
811XX
812XX
813XX
814XX
815XX
816XX
820XX
829XX
830XX
831XX
832XX
833XX
834XX
835XX
836XX
802XX
803XX
804XX
805XX
806XX
807XX
808XX
809XX
795XX
796XX
797XX
798XX
799XX
800XX
801XX
AZ
181
186
188
184
177
190
185
181
185
183
186
190
194
189
189
185
171
175
166
167
180
177
179
175
191
194
193
191
190
190
188
190
204
204
200
196
192
190
191
EL SK
101
103
104
102
99
105
103
101
104
103
104
105
108
106
106
103
95
97
93
93
100
99
99
97
106
108
108
107
106
106
105
106
116
117
114
112
109
106
107
Page 17
38
38
36
36
37
38
39
37
43
42
41
39
42
43
42
44
39
38
36
38
40
38
39
39
40
39
41
42
41
41
41
40
50
49
41
41
46
46
48
ZIP
CODE
RANGE
872XX
873XX
874XX
875XX
877XX
878XX
879XX
880XX
857XX
859XX
860XX
863XX
864XX
865XX
870XX
871XX
881XX
882XX
883XX
884XX
885XX
889XX
890XX
891XX
845XX
846XX
847XX
850XX
852XX
853XX
855XX
856XX
837XX
838XX
840XX
841XX
842XX
843XX
844XX
Page 18
AZ
192
189
190
189
190
186
186
190
176
184
189
190
183
184
180
179
192
173
172
173
196
196
193
195
181
178
184
184
181
177
177
181
168
166
178
177
176
176
176
44
47
48
49
46
46
45
45
47
46
46
46
50
48
47
48
49
47
46
47
46
47
47
44
49
49
49
50
43
43
45
49
41
41
40
41
39
34
41
EL SK
108
106
107
107
107
104
104
107
97
103
107
107
103
103
101
100
109
95
95
96
111
112
109
110
101
99
103
103
101
99
98
100
98
98
98
98
93
93
99
ZIP
CODE
RANGE
920XX
921XX
922XX
923XX
924XX
925XX
926XX
927XX
912XX
913XX
914XX
915XX
916XX
917XX
918XX
919XX
928XX
930XX
931XX
932XX
933XX
934XX
935XX
936XX
903XX
904XX
905XX
906XX
907XX
908XX
910XX
911XX
893XX
894XX
895XX
897XX
898XX
900XX
902XX
AZ
170
170
169
169
171
171
173
170
168
169
168
172
168
168
168
168
167
163
168
165
169
167
166
165
168
168
168
168
168
168
168
168
171
165
164
164
170
168
168
EL
49
49
49
49
50
50
49
49
49
49
49
51
49
49
49
49
48
48
48
46
49
49
49
47
49
49
49
49
49
49
49
49
44
41
49
49
43
43
43
SK
93
93
92
92
93
93
95
93
92
92
92
94
92
91
91
92
91
89
92
90
92
91
90
90
92
92
92
92
92
91
92
92
90
94
92
92
95
91
90
ZIP
CODE
RANGE
960XX
961XX
967XX
968XX
970XX
971XX
972XX
973XX
952XX
953XX
954XX
955XX
956XX
957XX
958XX
959XX
974XX
975XX
976XX
977XX
978XX
979XX
980XX
981XX
944XX
945XX
946XX
947XX
948XX
949XX
950XX
951XX
937XX
938XX
939XX
940XX
941XX
942XX
943XX
AZ
157
156
157
156
159
163
101
100
161
162
161
161
162
163
159
157
163
166
157
156
156
157
161
161
160
159
161
160
160
160
160
160
165
165
162
160
159
161
160
EL
37
37
37
37
42
43
41
40
44
44
44
43
45
45
44
42
37
38
35
34
39
40
40
39
45
45
46
46
45
45
45
45
45
45
44
45
46
46
46
SK
87
86
87
86
87
89
33
33
88
88
88
88
88
89
86
85
91
92
88
87
86
86
88
89
87
86
87
87
87
87
87
87
87
86
88
87
90
90
87
ZIP
CODE
RANGE
990XX
991XX
992XX
993XX
994XX
995XX
996XX
997XX
998XX
999XX
982XX
983XX
984XX
985XX
986XX
988XX
989XX
AZ
165
119
118
119
164
163
164
162
136
139
156
156
156
155
157
160
160
EL
36
15
15
11
34
34
34
36
22
25
35
36
34
36
34
35
35
SK
92
71
71
76
92
91
92
91
81
82
87
87
90
89
88
87
87
Page 19
Page 20
Notes
Radio Interference
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Modifying this receiver may void your authority to use the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If none of the remedies stops the radio interference, you should contact a licensed radio/television technician, your satellite dealer or call the Customer Service Center at 1-800-333-3474, for assistance.
Copyright Notice
Copyright © 2006 EchoStar Technologies Corporation, Englewood, Colorado 80112. All rights reserved.
The information in this guide may change without notice. We may issue revisions to tell you about such changes.
Please send comments or questions about this guide to: Technical Publications, EchoStar Technologies
Corporation, 94 Inverness Terrace East, Englewood, Colorado 80112 . Email: [email protected].
Part Number: 151255
Printed in the United States of America.
DISH Network is a registered trademark of EchoStar Satellite L.L.C. For information about DISH
Network, please visit our web site at www.dishnetwork.com
.
We acknowledge all product names, trade names, or corporate names we mention in this Installation Guide to be the proprietary property of the registered owners.
advertisement